Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.19 / 0d7f53e34d3f5f82c0f4941356a02285a78807a4 / . / drivers / net / wireless / mwifiex / cfg80211.c
blob: 45790faf6ebbcd28fe02c1f4f52b73168ff22304 [file] [log] [blame]
/*
* Marvell Wireless LAN device driver: CFG80211
*
* Copyright (C) 2011, Marvell International Ltd.
*
* This software file (the "File") is distributed by Marvell International
* Ltd. under the terms of the GNU General Public License Version 2, June 1991
* (the "License"). You may use, redistribute and/or modify this File in
* accordance with the terms and conditions of the License, a copy of which
* is available by writing to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
* worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
*
* THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
* IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
* ARE EXPRESSLY DISCLAIMED. The License provides additional details about
* this warranty disclaimer.
*/
#include "cfg80211.h"
#include "main.h"
static const struct ieee80211_iface_limit mwifiex_ap_sta_limits[] = {
{
.max = 2, .types = BIT(NL80211_IFTYPE_STATION),
},
{
.max = 1, .types = BIT(NL80211_IFTYPE_AP),
},
};
static const struct ieee80211_iface_combination mwifiex_iface_comb_ap_sta = {
.limits = mwifiex_ap_sta_limits,
.num_different_channels = 1,
.n_limits = ARRAY_SIZE(mwifiex_ap_sta_limits),
.max_interfaces = MWIFIEX_MAX_BSS_NUM,
.beacon_int_infra_match = true,
};
static const struct ieee80211_regdomain mwifiex_world_regdom_custom = {
.n_reg_rules = 7,
.alpha2 = "99",
.reg_rules = {
/* Channel 1 - 11 */
REG_RULE(2412-10, 2462+10, 40, 3, 20, 0),
/* Channel 12 - 13 */
REG_RULE(2467-10, 2472+10, 20, 3, 20,
NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS),
/* Channel 14 */
REG_RULE(2484-10, 2484+10, 20, 3, 20,
NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS |
NL80211_RRF_NO_OFDM),
/* Channel 36 - 48 */
REG_RULE(5180-10, 5240+10, 40, 3, 20,
NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS),
/* Channel 149 - 165 */
REG_RULE(5745-10, 5825+10, 40, 3, 20,
NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS),
/* Channel 52 - 64 */
REG_RULE(5260-10, 5320+10, 40, 3, 30,
NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS |
NL80211_RRF_DFS),
/* Channel 100 - 140 */
REG_RULE(5500-10, 5700+10, 40, 3, 30,
NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS |
NL80211_RRF_DFS),
}
};
/*
* This function maps the nl802.11 channel type into driver channel type.
*
* The mapping is as follows -
* NL80211_CHAN_NO_HT -> IEEE80211_HT_PARAM_CHA_SEC_NONE
* NL80211_CHAN_HT20 -> IEEE80211_HT_PARAM_CHA_SEC_NONE
* NL80211_CHAN_HT40PLUS -> IEEE80211_HT_PARAM_CHA_SEC_ABOVE
* NL80211_CHAN_HT40MINUS -> IEEE80211_HT_PARAM_CHA_SEC_BELOW
* Others -> IEEE80211_HT_PARAM_CHA_SEC_NONE
*/
u8 mwifiex_chan_type_to_sec_chan_offset(enum nl80211_channel_type chan_type)
{
switch (chan_type) {
case NL80211_CHAN_NO_HT:
case NL80211_CHAN_HT20:
return IEEE80211_HT_PARAM_CHA_SEC_NONE;
case NL80211_CHAN_HT40PLUS:
return IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
case NL80211_CHAN_HT40MINUS:
return IEEE80211_HT_PARAM_CHA_SEC_BELOW;
default:
return IEEE80211_HT_PARAM_CHA_SEC_NONE;
}
}
/*
* This function checks whether WEP is set.
*/
static int
mwifiex_is_alg_wep(u32 cipher)
{
switch (cipher) {
case WLAN_CIPHER_SUITE_WEP40:
case WLAN_CIPHER_SUITE_WEP104:
return 1;
default:
break;
}
return 0;
}
/*
* This function retrieves the private structure from kernel wiphy structure.
*/
static void *mwifiex_cfg80211_get_adapter(struct wiphy *wiphy)
{
return (void *) (*(unsigned long *) wiphy_priv(wiphy));
}
/*
* CFG802.11 operation handler to delete a network key.
*/
static int
mwifiex_cfg80211_del_key(struct wiphy *wiphy, struct net_device *netdev,
u8 key_index, bool pairwise, const u8 *mac_addr)
{
struct mwifiex_private *priv = mwifiex_netdev_get_priv(netdev);
const u8 bc_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
const u8 *peer_mac = pairwise ? mac_addr : bc_mac;
if (mwifiex_set_encode(priv, NULL, NULL, 0, key_index, peer_mac, 1)) {
wiphy_err(wiphy, "deleting the crypto keys\n");
return -EFAULT;
}
wiphy_dbg(wiphy, "info: crypto keys deleted\n");
return 0;
}
/*
* This function forms an skb for management frame.
*/
static int
mwifiex_form_mgmt_frame(struct sk_buff *skb, const u8 *buf, size_t len)
{
u8 addr[ETH_ALEN] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
u16 pkt_len;
u32 tx_control = 0, pkt_type = PKT_TYPE_MGMT;
struct timeval tv;
pkt_len = len + ETH_ALEN;
skb_reserve(skb, MWIFIEX_MIN_DATA_HEADER_LEN +
MWIFIEX_MGMT_FRAME_HEADER_SIZE + sizeof(pkt_len));
memcpy(skb_push(skb, sizeof(pkt_len)), &pkt_len, sizeof(pkt_len));
memcpy(skb_push(skb, sizeof(tx_control)),
&tx_control, sizeof(tx_control));
memcpy(skb_push(skb, sizeof(pkt_type)), &pkt_type, sizeof(pkt_type));
/* Add packet data and address4 */
memcpy(skb_put(skb, sizeof(struct ieee80211_hdr_3addr)), buf,
sizeof(struct ieee80211_hdr_3addr));
memcpy(skb_put(skb, ETH_ALEN), addr, ETH_ALEN);
memcpy(skb_put(skb, len - sizeof(struct ieee80211_hdr_3addr)),
buf + sizeof(struct ieee80211_hdr_3addr),
len - sizeof(struct ieee80211_hdr_3addr));
skb->priority = LOW_PRIO_TID;
do_gettimeofday(&tv);
skb->tstamp = timeval_to_ktime(tv);
return 0;
}
/*
* CFG802.11 operation handler to transmit a management frame.
*/
static int
mwifiex_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev,
struct ieee80211_channel *chan, bool offchan,
unsigned int wait, const u8 *buf, size_t len,
bool no_cck, bool dont_wait_for_ack, u64 *cookie)
{
struct sk_buff *skb;
u16 pkt_len;
const struct ieee80211_mgmt *mgmt;
struct mwifiex_private *priv = mwifiex_netdev_get_priv(wdev->netdev);
if (!buf || !len) {
wiphy_err(wiphy, "invalid buffer and length\n");
return -EFAULT;
}
mgmt = (const struct ieee80211_mgmt *)buf;
if (GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_STA &&
ieee80211_is_probe_resp(mgmt->frame_control)) {
/* Since we support offload probe resp, we need to skip probe
* resp in AP or GO mode */
wiphy_dbg(wiphy,
"info: skip to send probe resp in AP or GO mode\n");
return 0;
}
pkt_len = len + ETH_ALEN;
skb = dev_alloc_skb(MWIFIEX_MIN_DATA_HEADER_LEN +
MWIFIEX_MGMT_FRAME_HEADER_SIZE +
pkt_len + sizeof(pkt_len));
if (!skb) {
wiphy_err(wiphy, "allocate skb failed for management frame\n");
return -ENOMEM;
}
mwifiex_form_mgmt_frame(skb, buf, len);
mwifiex_queue_tx_pkt(priv, skb);
*cookie = random32() | 1;
cfg80211_mgmt_tx_status(wdev, *cookie, buf, len, true, GFP_ATOMIC);
wiphy_dbg(wiphy, "info: management frame transmitted\n");
return 0;
}
/*
* CFG802.11 operation handler to register a mgmt frame.
*/
static void
mwifiex_cfg80211_mgmt_frame_register(struct wiphy *wiphy,
struct wireless_dev *wdev,
u16 frame_type, bool reg)
{
struct mwifiex_private *priv = mwifiex_netdev_get_priv(wdev->netdev);
if (reg)
priv->mgmt_frame_mask |= BIT(frame_type >> 4);
else
priv->mgmt_frame_mask &= ~BIT(frame_type >> 4);
mwifiex_send_cmd_async(priv, HostCmd_CMD_MGMT_FRAME_REG,
HostCmd_ACT_GEN_SET, 0, &priv->mgmt_frame_mask);
wiphy_dbg(wiphy, "info: mgmt frame registered\n");
}
/*
* CFG802.11 operation handler to remain on channel.
*/
static int
mwifiex_cfg80211_remain_on_channel(struct wiphy *wiphy,
struct wireless_dev *wdev,
struct ieee80211_channel *chan,
unsigned int duration, u64 *cookie)
{
struct mwifiex_private *priv = mwifiex_netdev_get_priv(wdev->netdev);
int ret;
if (!chan || !cookie) {
wiphy_err(wiphy, "Invalid parameter for ROC\n");
return -EINVAL;
}
if (priv->roc_cfg.cookie) {
wiphy_dbg(wiphy, "info: ongoing ROC, cookie = 0x%llu\n",
priv->roc_cfg.cookie);
return -EBUSY;
}
ret = mwifiex_remain_on_chan_cfg(priv, HostCmd_ACT_GEN_SET, chan,
duration);
if (!ret) {
*cookie = random32() | 1;
priv->roc_cfg.cookie = *cookie;
priv->roc_cfg.chan = *chan;
cfg80211_ready_on_channel(wdev, *cookie, chan,
duration, GFP_ATOMIC);
wiphy_dbg(wiphy, "info: ROC, cookie = 0x%llx\n", *cookie);
}
return ret;
}
/*
* CFG802.11 operation handler to cancel remain on channel.
*/
static int
mwifiex_cfg80211_cancel_remain_on_channel(struct wiphy *wiphy,
struct wireless_dev *wdev, u64 cookie)
{
struct mwifiex_private *priv = mwifiex_netdev_get_priv(wdev->netdev);
int ret;
if (cookie != priv->roc_cfg.cookie)
return -ENOENT;
ret = mwifiex_remain_on_chan_cfg(priv, HostCmd_ACT_GEN_REMOVE,
&priv->roc_cfg.chan, 0);
if (!ret) {
cfg80211_remain_on_channel_expired(wdev, cookie,
&priv->roc_cfg.chan,
GFP_ATOMIC);
memset(&priv->roc_cfg, 0, sizeof(struct mwifiex_roc_cfg));
wiphy_dbg(wiphy, "info: cancel ROC, cookie = 0x%llx\n", cookie);
}
return ret;
}
/*
* CFG802.11 operation handler to set Tx power.
*/
static int
mwifiex_cfg80211_set_tx_power(struct wiphy *wiphy,
struct wireless_dev *wdev,
enum nl80211_tx_power_setting type,
int mbm)
{
struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy);
struct mwifiex_private *priv;
struct mwifiex_power_cfg power_cfg;
int dbm = MBM_TO_DBM(mbm);
if (type == NL80211_TX_POWER_FIXED) {
power_cfg.is_power_auto = 0;
power_cfg.power_level = dbm;
} else {
power_cfg.is_power_auto = 1;
}
priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY);
return mwifiex_set_tx_power(priv, &power_cfg);
}
/*
* CFG802.11 operation handler to set Power Save option.
*
* The timeout value, if provided, is currently ignored.
*/
static int
mwifiex_cfg80211_set_power_mgmt(struct wiphy *wiphy,
struct net_device *dev,
bool enabled, int timeout)
{
struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
u32 ps_mode;
if (timeout)
wiphy_dbg(wiphy,
"info: ignore timeout value for IEEE Power Save\n");
ps_mode = enabled;
return mwifiex_drv_set_power(priv, &ps_mode);
}
/*
* CFG802.11 operation handler to set the default network key.
*/
static int
mwifiex_cfg80211_set_default_key(struct wiphy *wiphy, struct net_device *netdev,
u8 key_index, bool unicast,
bool multicast)
{
struct mwifiex_private *priv = mwifiex_netdev_get_priv(netdev);
/* Return if WEP key not configured */
if (!priv->sec_info.wep_enabled)
return 0;
if (priv->bss_type == MWIFIEX_BSS_TYPE_UAP) {
priv->wep_key_curr_index = key_index;
} else if (mwifiex_set_encode(priv, NULL, NULL, 0, key_index,
NULL, 0)) {
wiphy_err(wiphy, "set default Tx key index\n");
return -EFAULT;
}
return 0;
}
/*
* CFG802.11 operation handler to add a network key.
*/
static int
mwifiex_cfg80211_add_key(struct wiphy *wiphy, struct net_device *netdev,
u8 key_index, bool pairwise, const u8 *mac_addr,
struct key_params *params)
{
struct mwifiex_private *priv = mwifiex_netdev_get_priv(netdev);
struct mwifiex_wep_key *wep_key;
const u8 bc_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
const u8 *peer_mac = pairwise ? mac_addr : bc_mac;
if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_UAP &&
(params->cipher == WLAN_CIPHER_SUITE_WEP40 ||
params->cipher == WLAN_CIPHER_SUITE_WEP104)) {
if (params->key && params->key_len) {
wep_key = &priv->wep_key[key_index];
memset(wep_key, 0, sizeof(struct mwifiex_wep_key));
memcpy(wep_key->key_material, params->key,
params->key_len);
wep_key->key_index = key_index;
wep_key->key_length = params->key_len;
priv->sec_info.wep_enabled = 1;
}
return 0;
}
if (mwifiex_set_encode(priv, params, params->key, params->key_len,
key_index, peer_mac, 0)) {
wiphy_err(wiphy, "crypto keys added\n");
return -EFAULT;
}
return 0;
}
/*
* This function sends domain information to the firmware.
*
* The following information are passed to the firmware -
* - Country codes
* - Sub bands (first channel, number of channels, maximum Tx power)
*/
static int mwifiex_send_domain_info_cmd_fw(struct wiphy *wiphy)
{
u8 no_of_triplet = 0;
struct ieee80211_country_ie_triplet *t;
u8 no_of_parsed_chan = 0;
u8 first_chan = 0, next_chan = 0, max_pwr = 0;
u8 i, flag = 0;
enum ieee80211_band band;
struct ieee80211_supported_band *sband;
struct ieee80211_channel *ch;
struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy);
struct mwifiex_private *priv;
struct mwifiex_802_11d_domain_reg *domain_info = &adapter->domain_reg;
/* Set country code */
domain_info->country_code[0] = adapter->country_code[0];
domain_info->country_code[1] = adapter->country_code[1];
domain_info->country_code[2] = ' ';
band = mwifiex_band_to_radio_type(adapter->config_bands);
if (!wiphy->bands[band]) {
wiphy_err(wiphy, "11D: setting domain info in FW\n");
return -1;
}
sband = wiphy->bands[band];
for (i = 0; i < sband->n_channels ; i++) {
ch = &sband->channels[i];
if (ch->flags & IEEE80211_CHAN_DISABLED)
continue;
if (!flag) {
flag = 1;
first_chan = (u32) ch->hw_value;
next_chan = first_chan;
max_pwr = ch->max_power;
no_of_parsed_chan = 1;
continue;
}
if (ch->hw_value == next_chan + 1 &&
ch->max_power == max_pwr) {
next_chan++;
no_of_parsed_chan++;
} else {
t = &domain_info->triplet[no_of_triplet];
t->chans.first_channel = first_chan;
t->chans.num_channels = no_of_parsed_chan;
t->chans.max_power = max_pwr;
no_of_triplet++;
first_chan = (u32) ch->hw_value;
next_chan = first_chan;
max_pwr = ch->max_power;
no_of_parsed_chan = 1;
}
}
if (flag) {
t = &domain_info->triplet[no_of_triplet];
t->chans.first_channel = first_chan;
t->chans.num_channels = no_of_parsed_chan;
t->chans.max_power = max_pwr;
no_of_triplet++;
}
domain_info->no_of_triplet = no_of_triplet;
priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY);
if (mwifiex_send_cmd_async(priv, HostCmd_CMD_802_11D_DOMAIN_INFO,
HostCmd_ACT_GEN_SET, 0, NULL)) {
wiphy_err(wiphy, "11D: setting domain info in FW\n");
return -1;
}
return 0;
}
/*
* CFG802.11 regulatory domain callback function.
*
* This function is called when the regulatory domain is changed due to the
* following reasons -
* - Set by driver
* - Set by system core
* - Set by user
* - Set bt Country IE
*/
static void mwifiex_reg_notifier(struct wiphy *wiphy,
struct regulatory_request *request)
{
struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy);
wiphy_dbg(wiphy, "info: cfg80211 regulatory domain callback for %c%c\n",
request->alpha2[0], request->alpha2[1]);
memcpy(adapter->country_code, request->alpha2, sizeof(request->alpha2));
switch (request->initiator) {
case NL80211_REGDOM_SET_BY_DRIVER:
case NL80211_REGDOM_SET_BY_CORE:
case NL80211_REGDOM_SET_BY_USER:
break;
/* Todo: apply driver specific changes in channel flags based
on the request initiator if necessary. */
case NL80211_REGDOM_SET_BY_COUNTRY_IE:
break;
}
mwifiex_send_domain_info_cmd_fw(wiphy);
}
/*
* This function sets the fragmentation threshold.
*
* The fragmentation threshold value must lie between MWIFIEX_FRAG_MIN_VALUE
* and MWIFIEX_FRAG_MAX_VALUE.
*/
static int
mwifiex_set_frag(struct mwifiex_private *priv, u32 frag_thr)
{
if (frag_thr < MWIFIEX_FRAG_MIN_VALUE ||
frag_thr > MWIFIEX_FRAG_MAX_VALUE)
frag_thr = MWIFIEX_FRAG_MAX_VALUE;
return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_SNMP_MIB,
HostCmd_ACT_GEN_SET, FRAG_THRESH_I,
&frag_thr);
}
/*
* This function sets the RTS threshold.
* The rts value must lie between MWIFIEX_RTS_MIN_VALUE
* and MWIFIEX_RTS_MAX_VALUE.
*/
static int
mwifiex_set_rts(struct mwifiex_private *priv, u32 rts_thr)
{
if (rts_thr < MWIFIEX_RTS_MIN_VALUE || rts_thr > MWIFIEX_RTS_MAX_VALUE)
rts_thr = MWIFIEX_RTS_MAX_VALUE;
return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_SNMP_MIB,
HostCmd_ACT_GEN_SET, RTS_THRESH_I,
&rts_thr);
}
/*
* CFG802.11 operation handler to set wiphy parameters.
*
* This function can be used to set the RTS threshold and the
* Fragmentation threshold of the driver.
*/
static int
mwifiex_cfg80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
{
struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy);
struct mwifiex_private *priv;
struct mwifiex_uap_bss_param *bss_cfg;
int ret, bss_started, i;
for (i = 0; i < adapter->priv_num; i++) {
priv = adapter->priv[i];
switch (priv->bss_role) {
case MWIFIEX_BSS_ROLE_UAP:
bss_cfg = kzalloc(sizeof(struct mwifiex_uap_bss_param),
GFP_KERNEL);
if (!bss_cfg)
return -ENOMEM;
mwifiex_set_sys_config_invalid_data(bss_cfg);
if (changed & WIPHY_PARAM_RTS_THRESHOLD)
bss_cfg->rts_threshold = wiphy->rts_threshold;
if (changed & WIPHY_PARAM_FRAG_THRESHOLD)
bss_cfg->frag_threshold = wiphy->frag_threshold;
if (changed & WIPHY_PARAM_RETRY_LONG)
bss_cfg->retry_limit = wiphy->retry_long;
bss_started = priv->bss_started;
ret = mwifiex_send_cmd_sync(priv,
HostCmd_CMD_UAP_BSS_STOP,
HostCmd_ACT_GEN_SET, 0,
NULL);
if (ret) {
wiphy_err(wiphy, "Failed to stop the BSS\n");
kfree(bss_cfg);
return ret;
}
ret = mwifiex_send_cmd_async(priv,
HostCmd_CMD_UAP_SYS_CONFIG,
HostCmd_ACT_GEN_SET,
UAP_BSS_PARAMS_I, bss_cfg);
kfree(bss_cfg);
if (ret) {
wiphy_err(wiphy, "Failed to set bss config\n");
return ret;
}
if (!bss_started)
break;
ret = mwifiex_send_cmd_async(priv,
HostCmd_CMD_UAP_BSS_START,
HostCmd_ACT_GEN_SET, 0,
NULL);
if (ret) {
wiphy_err(wiphy, "Failed to start BSS\n");
return ret;
}
break;
case MWIFIEX_BSS_ROLE_STA:
if (changed & WIPHY_PARAM_RTS_THRESHOLD) {
ret = mwifiex_set_rts(priv,
wiphy->rts_threshold);
if (ret)
return ret;
}
if (changed & WIPHY_PARAM_FRAG_THRESHOLD) {
ret = mwifiex_set_frag(priv,
wiphy->frag_threshold);
if (ret)
return ret;
}
break;
}
}
return 0;
}
static int
mwifiex_cfg80211_deinit_p2p(struct mwifiex_private *priv)
{
u16 mode = P2P_MODE_DISABLE;
if (GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_STA)
mwifiex_set_bss_role(priv, MWIFIEX_BSS_ROLE_STA);
if (mwifiex_send_cmd_sync(priv, HostCmd_CMD_P2P_MODE_CFG,
HostCmd_ACT_GEN_SET, 0, &mode))
return -1;
return 0;
}
/*
* This function initializes the functionalities for P2P client.
* The P2P client initialization sequence is:
* disable -> device -> client
*/
static int
mwifiex_cfg80211_init_p2p_client(struct mwifiex_private *priv)
{
u16 mode;
if (mwifiex_cfg80211_deinit_p2p(priv))
return -1;
mode = P2P_MODE_DEVICE;
if (mwifiex_send_cmd_sync(priv, HostCmd_CMD_P2P_MODE_CFG,
HostCmd_ACT_GEN_SET, 0, &mode))
return -1;
mode = P2P_MODE_CLIENT;
if (mwifiex_send_cmd_sync(priv, HostCmd_CMD_P2P_MODE_CFG,
HostCmd_ACT_GEN_SET, 0, &mode))
return -1;
return 0;
}
/*
* This function initializes the functionalities for P2P GO.
* The P2P GO initialization sequence is:
* disable -> device -> GO
*/
static int
mwifiex_cfg80211_init_p2p_go(struct mwifiex_private *priv)
{
u16 mode;
if (mwifiex_cfg80211_deinit_p2p(priv))
return -1;
mode = P2P_MODE_DEVICE;
if (mwifiex_send_cmd_sync(priv, HostCmd_CMD_P2P_MODE_CFG,
HostCmd_ACT_GEN_SET, 0, &mode))
return -1;
mode = P2P_MODE_GO;
if (mwifiex_send_cmd_sync(priv, HostCmd_CMD_P2P_MODE_CFG,
HostCmd_ACT_GEN_SET, 0, &mode))
return -1;
if (GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_UAP)
mwifiex_set_bss_role(priv, MWIFIEX_BSS_ROLE_UAP);
return 0;
}
/*
* CFG802.11 operation handler to change interface type.
*/
static int
mwifiex_cfg80211_change_virtual_intf(struct wiphy *wiphy,
struct net_device *dev,
enum nl80211_iftype type, u32 *flags,
struct vif_params *params)
{
int ret;
struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
switch (dev->ieee80211_ptr->iftype) {
case NL80211_IFTYPE_ADHOC:
switch (type) {
case NL80211_IFTYPE_STATION:
break;
case NL80211_IFTYPE_UNSPECIFIED:
wiphy_warn(wiphy, "%s: kept type as IBSS\n", dev->name);
case NL80211_IFTYPE_ADHOC: /* This shouldn't happen */
return 0;
case NL80211_IFTYPE_AP:
default:
wiphy_err(wiphy, "%s: changing to %d not supported\n",
dev->name, type);
return -EOPNOTSUPP;
}
break;
case NL80211_IFTYPE_STATION:
switch (type) {
case NL80211_IFTYPE_ADHOC:
break;
case NL80211_IFTYPE_P2P_CLIENT:
if (mwifiex_cfg80211_init_p2p_client(priv))
return -EFAULT;
dev->ieee80211_ptr->iftype = type;
return 0;
case NL80211_IFTYPE_P2P_GO:
if (mwifiex_cfg80211_init_p2p_go(priv))
return -EFAULT;
dev->ieee80211_ptr->iftype = type;
return 0;
case NL80211_IFTYPE_UNSPECIFIED:
wiphy_warn(wiphy, "%s: kept type as STA\n", dev->name);
case NL80211_IFTYPE_STATION: /* This shouldn't happen */
return 0;
case NL80211_IFTYPE_AP:
default:
wiphy_err(wiphy, "%s: changing to %d not supported\n",
dev->name, type);
return -EOPNOTSUPP;
}
break;
case NL80211_IFTYPE_AP:
switch (type) {
case NL80211_IFTYPE_UNSPECIFIED:
wiphy_warn(wiphy, "%s: kept type as AP\n", dev->name);
case NL80211_IFTYPE_AP: /* This shouldn't happen */
return 0;
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_STATION:
default:
wiphy_err(wiphy, "%s: changing to %d not supported\n",
dev->name, type);
return -EOPNOTSUPP;
}
break;
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_P2P_GO:
switch (type) {
case NL80211_IFTYPE_STATION:
if (mwifiex_cfg80211_deinit_p2p(priv))
return -EFAULT;
dev->ieee80211_ptr->iftype = type;
return 0;
default:
return -EOPNOTSUPP;
}
break;
default:
wiphy_err(wiphy, "%s: unknown iftype: %d\n",
dev->name, dev->ieee80211_ptr->iftype);
return -EOPNOTSUPP;
}
dev->ieee80211_ptr->iftype = type;
priv->bss_mode = type;
mwifiex_deauthenticate(priv, NULL);
priv->sec_info.authentication_mode = NL80211_AUTHTYPE_OPEN_SYSTEM;
ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_SET_BSS_MODE,
HostCmd_ACT_GEN_SET, 0, NULL);
return ret;
}
static void
mwifiex_parse_htinfo(struct mwifiex_private *priv, u8 tx_htinfo,
struct rate_info *rate)
{
struct mwifiex_adapter *adapter = priv->adapter;
if (adapter->is_hw_11ac_capable) {
/* bit[1-0]: 00=LG 01=HT 10=VHT */
if (tx_htinfo & BIT(0)) {
/* HT */
rate->mcs = priv->tx_rate;
rate->flags |= RATE_INFO_FLAGS_MCS;
}
if (tx_htinfo & BIT(1)) {
/* VHT */
rate->mcs = priv->tx_rate & 0x0F;
rate->flags |= RATE_INFO_FLAGS_VHT_MCS;
}
if (tx_htinfo & (BIT(1) | BIT(0))) {
/* HT or VHT */
switch (tx_htinfo & (BIT(3) | BIT(2))) {
case 0:
/* This will be 20MHz */
break;
case (BIT(2)):
rate->flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH;
break;
case (BIT(3)):
rate->flags |= RATE_INFO_FLAGS_80_MHZ_WIDTH;
break;
case (BIT(3) | BIT(2)):
rate->flags |= RATE_INFO_FLAGS_160_MHZ_WIDTH;
break;
}
if (tx_htinfo & BIT(4))
rate->flags |= RATE_INFO_FLAGS_SHORT_GI;
if ((priv->tx_rate >> 4) == 1)
rate->nss = 2;
else
rate->nss = 1;
}
} else {
/*
* Bit 0 in tx_htinfo indicates that current Tx rate
* is 11n rate. Valid MCS index values for us are 0 to 15.
*/
if ((tx_htinfo & BIT(0)) && (priv->tx_rate < 16)) {
rate->mcs = priv->tx_rate;
rate->flags |= RATE_INFO_FLAGS_MCS;
if (tx_htinfo & BIT(1))
rate->flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH;
if (tx_htinfo & BIT(2))
rate->flags |= RATE_INFO_FLAGS_SHORT_GI;
}
}
}
/*
* This function dumps the station information on a buffer.
*
* The following information are shown -
* - Total bytes transmitted
* - Total bytes received
* - Total packets transmitted
* - Total packets received
* - Signal quality level
* - Transmission rate
*/
static int
mwifiex_dump_station_info(struct mwifiex_private *priv,
struct station_info *sinfo)
{
u32 rate;
sinfo->filled = STATION_INFO_RX_BYTES | STATION_INFO_TX_BYTES |
STATION_INFO_RX_PACKETS | STATION_INFO_TX_PACKETS |
STATION_INFO_TX_BITRATE |
STATION_INFO_SIGNAL | STATION_INFO_SIGNAL_AVG;
/* Get signal information from the firmware */
if (mwifiex_send_cmd_sync(priv, HostCmd_CMD_RSSI_INFO,
HostCmd_ACT_GEN_GET, 0, NULL)) {
dev_err(priv->adapter->dev, "failed to get signal information\n");
return -EFAULT;
}
if (mwifiex_drv_get_data_rate(priv, &rate)) {
dev_err(priv->adapter->dev, "getting data rate\n");
return -EFAULT;
}
/* Get DTIM period information from firmware */
mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_SNMP_MIB,
HostCmd_ACT_GEN_GET, DTIM_PERIOD_I,
&priv->dtim_period);
mwifiex_parse_htinfo(priv, priv->tx_htinfo, &sinfo->txrate);
sinfo->signal_avg = priv->bcn_rssi_avg;
sinfo->rx_bytes = priv->stats.rx_bytes;
sinfo->tx_bytes = priv->stats.tx_bytes;
sinfo->rx_packets = priv->stats.rx_packets;
sinfo->tx_packets = priv->stats.tx_packets;
sinfo->signal = priv->bcn_rssi_avg;
/* bit rate is in 500 kb/s units. Convert it to 100kb/s units */
sinfo->txrate.legacy = rate * 5;
if (priv->bss_mode == NL80211_IFTYPE_STATION) {
sinfo->filled |= STATION_INFO_BSS_PARAM;
sinfo->bss_param.flags = 0;
if (priv->curr_bss_params.bss_descriptor.cap_info_bitmap &
WLAN_CAPABILITY_SHORT_PREAMBLE)
sinfo->bss_param.flags |=
BSS_PARAM_FLAGS_SHORT_PREAMBLE;
if (priv->curr_bss_params.bss_descriptor.cap_info_bitmap &
WLAN_CAPABILITY_SHORT_SLOT_TIME)
sinfo->bss_param.flags |=
BSS_PARAM_FLAGS_SHORT_SLOT_TIME;
sinfo->bss_param.dtim_period = priv->dtim_period;
sinfo->bss_param.beacon_interval =
priv->curr_bss_params.bss_descriptor.beacon_period;
}
return 0;
}
/*
* CFG802.11 operation handler to get station information.
*
* This function only works in connected mode, and dumps the
* requested station information, if available.
*/
static int
mwifiex_cfg80211_get_station(struct wiphy *wiphy, struct net_device *dev,
u8 *mac, struct station_info *sinfo)
{
struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
if (!priv->media_connected)
return -ENOENT;
if (memcmp(mac, priv->cfg_bssid, ETH_ALEN))
return -ENOENT;
return mwifiex_dump_station_info(priv, sinfo);
}
/*
* CFG802.11 operation handler to dump station information.
*/
static int
mwifiex_cfg80211_dump_station(struct wiphy *wiphy, struct net_device *dev,
int idx, u8 *mac, struct station_info *sinfo)
{
struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
if (!priv->media_connected || idx)
return -ENOENT;
memcpy(mac, priv->cfg_bssid, ETH_ALEN);
return mwifiex_dump_station_info(priv, sinfo);
}
/* Supported rates to be advertised to the cfg80211 */
static struct ieee80211_rate mwifiex_rates[] = {
{.bitrate = 10, .hw_value = 2, },
{.bitrate = 20, .hw_value = 4, },
{.bitrate = 55, .hw_value = 11, },
{.bitrate = 110, .hw_value = 22, },
{.bitrate = 60, .hw_value = 12, },
{.bitrate = 90, .hw_value = 18, },
{.bitrate = 120, .hw_value = 24, },
{.bitrate = 180, .hw_value = 36, },
{.bitrate = 240, .hw_value = 48, },
{.bitrate = 360, .hw_value = 72, },
{.bitrate = 480, .hw_value = 96, },
{.bitrate = 540, .hw_value = 108, },
};
/* Channel definitions to be advertised to cfg80211 */
static struct ieee80211_channel mwifiex_channels_2ghz[] = {
{.center_freq = 2412, .hw_value = 1, },
{.center_freq = 2417, .hw_value = 2, },
{.center_freq = 2422, .hw_value = 3, },
{.center_freq = 2427, .hw_value = 4, },
{.center_freq = 2432, .hw_value = 5, },
{.center_freq = 2437, .hw_value = 6, },
{.center_freq = 2442, .hw_value = 7, },
{.center_freq = 2447, .hw_value = 8, },
{.center_freq = 2452, .hw_value = 9, },
{.center_freq = 2457, .hw_value = 10, },
{.center_freq = 2462, .hw_value = 11, },
{.center_freq = 2467, .hw_value = 12, },
{.center_freq = 2472, .hw_value = 13, },
{.center_freq = 2484, .hw_value = 14, },
};
static struct ieee80211_supported_band mwifiex_band_2ghz = {
.channels = mwifiex_channels_2ghz,
.n_channels = ARRAY_SIZE(mwifiex_channels_2ghz),
.bitrates = mwifiex_rates,
.n_bitrates = ARRAY_SIZE(mwifiex_rates),
};
static struct ieee80211_channel mwifiex_channels_5ghz[] = {
{.center_freq = 5040, .hw_value = 8, },
{.center_freq = 5060, .hw_value = 12, },
{.center_freq = 5080, .hw_value = 16, },
{.center_freq = 5170, .hw_value = 34, },
{.center_freq = 5190, .hw_value = 38, },
{.center_freq = 5210, .hw_value = 42, },
{.center_freq = 5230, .hw_value = 46, },
{.center_freq = 5180, .hw_value = 36, },
{.center_freq = 5200, .hw_value = 40, },
{.center_freq = 5220, .hw_value = 44, },
{.center_freq = 5240, .hw_value = 48, },
{.center_freq = 5260, .hw_value = 52, },
{.center_freq = 5280, .hw_value = 56, },
{.center_freq = 5300, .hw_value = 60, },
{.center_freq = 5320, .hw_value = 64, },
{.center_freq = 5500, .hw_value = 100, },
{.center_freq = 5520, .hw_value = 104, },
{.center_freq = 5540, .hw_value = 108, },
{.center_freq = 5560, .hw_value = 112, },
{.center_freq = 5580, .hw_value = 116, },
{.center_freq = 5600, .hw_value = 120, },
{.center_freq = 5620, .hw_value = 124, },
{.center_freq = 5640, .hw_value = 128, },
{.center_freq = 5660, .hw_value = 132, },
{.center_freq = 5680, .hw_value = 136, },
{.center_freq = 5700, .hw_value = 140, },
{.center_freq = 5745, .hw_value = 149, },
{.center_freq = 5765, .hw_value = 153, },
{.center_freq = 5785, .hw_value = 157, },
{.center_freq = 5805, .hw_value = 161, },
{.center_freq = 5825, .hw_value = 165, },
};
static struct ieee80211_supported_band mwifiex_band_5ghz = {
.channels = mwifiex_channels_5ghz,
.n_channels = ARRAY_SIZE(mwifiex_channels_5ghz),
.bitrates = mwifiex_rates + 4,
.n_bitrates = ARRAY_SIZE(mwifiex_rates) - 4,
};
/* Supported crypto cipher suits to be advertised to cfg80211 */
static const u32 mwifiex_cipher_suites[] = {
WLAN_CIPHER_SUITE_WEP40,
WLAN_CIPHER_SUITE_WEP104,
WLAN_CIPHER_SUITE_TKIP,
WLAN_CIPHER_SUITE_CCMP,
WLAN_CIPHER_SUITE_AES_CMAC,
};
/* Supported mgmt frame types to be advertised to cfg80211 */
static const struct ieee80211_txrx_stypes
mwifiex_mgmt_stypes[NUM_NL80211_IFTYPES] = {
[NL80211_IFTYPE_STATION] = {
.tx = BIT(IEEE80211_STYPE_ACTION >> 4) |
BIT(IEEE80211_STYPE_PROBE_RESP >> 4),
.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
},
[NL80211_IFTYPE_AP] = {
.tx = BIT(IEEE80211_STYPE_ACTION >> 4) |
BIT(IEEE80211_STYPE_PROBE_RESP >> 4),
.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
},
[NL80211_IFTYPE_P2P_CLIENT] = {
.tx = BIT(IEEE80211_STYPE_ACTION >> 4) |
BIT(IEEE80211_STYPE_PROBE_RESP >> 4),
.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
},
[NL80211_IFTYPE_P2P_GO] = {
.tx = BIT(IEEE80211_STYPE_ACTION >> 4) |
BIT(IEEE80211_STYPE_PROBE_RESP >> 4),
.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
},
};
/*
* CFG802.11 operation handler for setting bit rates.
*
* Function configures data rates to firmware using bitrate mask
* provided by cfg80211.
*/
static int mwifiex_cfg80211_set_bitrate_mask(struct wiphy *wiphy,
struct net_device *dev,
const u8 *peer,
const struct cfg80211_bitrate_mask *mask)
{
struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
u16 bitmap_rates[MAX_BITMAP_RATES_SIZE];
enum ieee80211_band band;
if (!priv->media_connected) {
dev_err(priv->adapter->dev,
"Can not set Tx data rate in disconnected state\n");
return -EINVAL;
}
band = mwifiex_band_to_radio_type(priv->curr_bss_params.band);
memset(bitmap_rates, 0, sizeof(bitmap_rates));
/* Fill HR/DSSS rates. */
if (band == IEEE80211_BAND_2GHZ)
bitmap_rates[0] = mask->control[band].legacy & 0x000f;
/* Fill OFDM rates */
if (band == IEEE80211_BAND_2GHZ)
bitmap_rates[1] = (mask->control[band].legacy & 0x0ff0) >> 4;
else
bitmap_rates[1] = mask->control[band].legacy;
/* Fill MCS rates */
bitmap_rates[2] = mask->control[band].mcs[0];
if (priv->adapter->hw_dev_mcs_support == HT_STREAM_2X2)
bitmap_rates[2] |= mask->control[band].mcs[1] << 8;
return mwifiex_send_cmd_sync(priv, HostCmd_CMD_TX_RATE_CFG,
HostCmd_ACT_GEN_SET, 0, bitmap_rates);
}
/*
* CFG802.11 operation handler for connection quality monitoring.
*
* This function subscribes/unsubscribes HIGH_RSSI and LOW_RSSI
* events to FW.
*/
static int mwifiex_cfg80211_set_cqm_rssi_config(struct wiphy *wiphy,
struct net_device *dev,
s32 rssi_thold, u32 rssi_hyst)
{
struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
struct mwifiex_ds_misc_subsc_evt subsc_evt;
priv->cqm_rssi_thold = rssi_thold;
priv->cqm_rssi_hyst = rssi_hyst;
memset(&subsc_evt, 0x00, sizeof(struct mwifiex_ds_misc_subsc_evt));
subsc_evt.events = BITMASK_BCN_RSSI_LOW | BITMASK_BCN_RSSI_HIGH;
/* Subscribe/unsubscribe low and high rssi events */
if (rssi_thold && rssi_hyst) {
subsc_evt.action = HostCmd_ACT_BITWISE_SET;
subsc_evt.bcn_l_rssi_cfg.abs_value = abs(rssi_thold);
subsc_evt.bcn_h_rssi_cfg.abs_value = abs(rssi_thold);
subsc_evt.bcn_l_rssi_cfg.evt_freq = 1;
subsc_evt.bcn_h_rssi_cfg.evt_freq = 1;
return mwifiex_send_cmd_sync(priv,
HostCmd_CMD_802_11_SUBSCRIBE_EVENT,
0, 0, &subsc_evt);
} else {
subsc_evt.action = HostCmd_ACT_BITWISE_CLR;
return mwifiex_send_cmd_sync(priv,
HostCmd_CMD_802_11_SUBSCRIBE_EVENT,
0, 0, &subsc_evt);
}
return 0;
}
/* cfg80211 operation handler for change_beacon.
* Function retrieves and sets modified management IEs to FW.
*/
static int mwifiex_cfg80211_change_beacon(struct wiphy *wiphy,
struct net_device *dev,
struct cfg80211_beacon_data *data)
{
struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
if (GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_UAP) {
wiphy_err(wiphy, "%s: bss_type mismatched\n", __func__);
return -EINVAL;
}
if (!priv->bss_started) {
wiphy_err(wiphy, "%s: bss not started\n", __func__);
return -EINVAL;
}
if (mwifiex_set_mgmt_ies(priv, data)) {
wiphy_err(wiphy, "%s: setting mgmt ies failed\n", __func__);
return -EFAULT;
}
return 0;
}
static int
mwifiex_cfg80211_set_antenna(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant)
{
struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy);
struct mwifiex_private *priv = mwifiex_get_priv(adapter,
MWIFIEX_BSS_ROLE_ANY);
struct mwifiex_ds_ant_cfg ant_cfg;
if (!tx_ant || !rx_ant)
return -EOPNOTSUPP;
if (adapter->hw_dev_mcs_support != HT_STREAM_2X2) {
/* Not a MIMO chip. User should provide specific antenna number
* for Tx/Rx path or enable all antennas for diversity
*/
if (tx_ant != rx_ant)
return -EOPNOTSUPP;
if ((tx_ant & (tx_ant - 1)) &&
(tx_ant != BIT(adapter->number_of_antenna) - 1))
return -EOPNOTSUPP;
if ((tx_ant == BIT(adapter->number_of_antenna) - 1) &&
(priv->adapter->number_of_antenna > 1)) {
tx_ant = RF_ANTENNA_AUTO;
rx_ant = RF_ANTENNA_AUTO;
}
}
ant_cfg.tx_ant = tx_ant;
ant_cfg.rx_ant = rx_ant;
return mwifiex_send_cmd_sync(priv, HostCmd_CMD_RF_ANTENNA,
HostCmd_ACT_GEN_SET, 0, &ant_cfg);
}
/* cfg80211 operation handler for stop ap.
* Function stops BSS running at uAP interface.
*/
static int mwifiex_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *dev)
{
struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
if (mwifiex_del_mgmt_ies(priv))
wiphy_err(wiphy, "Failed to delete mgmt IEs!\n");
priv->ap_11n_enabled = 0;
if (mwifiex_send_cmd_sync(priv, HostCmd_CMD_UAP_BSS_STOP,
HostCmd_ACT_GEN_SET, 0, NULL)) {
wiphy_err(wiphy, "Failed to stop the BSS\n");
return -1;
}
return 0;
}
/* cfg80211 operation handler for start_ap.
* Function sets beacon period, DTIM period, SSID and security into
* AP config structure.
* AP is configured with these settings and BSS is started.
*/
static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy,
struct net_device *dev,
struct cfg80211_ap_settings *params)
{
struct mwifiex_uap_bss_param *bss_cfg;
struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
u8 config_bands = 0;
if (GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_UAP)
return -1;
if (mwifiex_set_mgmt_ies(priv, &params->beacon))
return -1;
bss_cfg = kzalloc(sizeof(struct mwifiex_uap_bss_param), GFP_KERNEL);
if (!bss_cfg)
return -ENOMEM;
mwifiex_set_sys_config_invalid_data(bss_cfg);
if (params->beacon_interval)
bss_cfg->beacon_period = params->beacon_interval;
if (params->dtim_period)
bss_cfg->dtim_period = params->dtim_period;
if (params->ssid && params->ssid_len) {
memcpy(bss_cfg->ssid.ssid, params->ssid, params->ssid_len);
bss_cfg->ssid.ssid_len = params->ssid_len;
}
switch (params->hidden_ssid) {
case NL80211_HIDDEN_SSID_NOT_IN_USE:
bss_cfg->bcast_ssid_ctl = 1;
break;
case NL80211_HIDDEN_SSID_ZERO_LEN:
bss_cfg->bcast_ssid_ctl = 0;
break;
case NL80211_HIDDEN_SSID_ZERO_CONTENTS:
/* firmware doesn't support this type of hidden SSID */
default:
kfree(bss_cfg);
return -EINVAL;
}
bss_cfg->channel = ieee80211_frequency_to_channel(
params->chandef.chan->center_freq);
/* Set appropriate bands */
if (params->chandef.chan->band == IEEE80211_BAND_2GHZ) {
bss_cfg->band_cfg = BAND_CONFIG_BG;
config_bands = BAND_B | BAND_G;
if (params->chandef.width > NL80211_CHAN_WIDTH_20_NOHT)
config_bands |= BAND_GN;
if (params->chandef.width > NL80211_CHAN_WIDTH_40)
config_bands |= BAND_GAC;
} else {
bss_cfg->band_cfg = BAND_CONFIG_A;
config_bands = BAND_A;
if (params->chandef.width > NL80211_CHAN_WIDTH_20_NOHT)
config_bands |= BAND_AN;
if (params->chandef.width > NL80211_CHAN_WIDTH_40)
config_bands |= BAND_AAC;
}
if (!((config_bands | priv->adapter->fw_bands) &
~priv->adapter->fw_bands))
priv->adapter->config_bands = config_bands;
mwifiex_set_uap_rates(bss_cfg, params);
mwifiex_send_domain_info_cmd_fw(wiphy);
if (mwifiex_set_secure_params(priv, bss_cfg, params)) {
kfree(bss_cfg);
wiphy_err(wiphy, "Failed to parse secuirty parameters!\n");
return -1;
}
mwifiex_set_ht_params(priv, bss_cfg, params);
mwifiex_set_wmm_params(priv, bss_cfg, params);
if (params->inactivity_timeout > 0) {
/* sta_ao_timer/ps_sta_ao_timer is in unit of 100ms */
bss_cfg->sta_ao_timer = 10 * params->inactivity_timeout;
bss_cfg->ps_sta_ao_timer = 10 * params->inactivity_timeout;
}
if (mwifiex_send_cmd_sync(priv, HostCmd_CMD_UAP_BSS_STOP,
HostCmd_ACT_GEN_SET, 0, NULL)) {
wiphy_err(wiphy, "Failed to stop the BSS\n");
kfree(bss_cfg);
return -1;
}
if (mwifiex_send_cmd_async(priv, HostCmd_CMD_UAP_SYS_CONFIG,
HostCmd_ACT_GEN_SET,
UAP_BSS_PARAMS_I, bss_cfg)) {
wiphy_err(wiphy, "Failed to set the SSID\n");
kfree(bss_cfg);
return -1;
}
kfree(bss_cfg);
if (mwifiex_send_cmd_async(priv, HostCmd_CMD_UAP_BSS_START,
HostCmd_ACT_GEN_SET, 0, NULL)) {
wiphy_err(wiphy, "Failed to start the BSS\n");
return -1;
}
if (priv->sec_info.wep_enabled)
priv->curr_pkt_filter |= HostCmd_ACT_MAC_WEP_ENABLE;
else
priv->curr_pkt_filter &= ~HostCmd_ACT_MAC_WEP_ENABLE;
if (mwifiex_send_cmd_sync(priv, HostCmd_CMD_MAC_CONTROL,
HostCmd_ACT_GEN_SET, 0,
&priv->curr_pkt_filter))
return -1;
return 0;
}
/*
* CFG802.11 operation handler for disconnection request.
*
* This function does not work when there is already a disconnection
* procedure going on.
*/
static int
mwifiex_cfg80211_disconnect(struct wiphy *wiphy, struct net_device *dev,
u16 reason_code)
{
struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
if (mwifiex_deauthenticate(priv, NULL))
return -EFAULT;
wiphy_dbg(wiphy, "info: successfully disconnected from %pM:"
" reason code %d\n", priv->cfg_bssid, reason_code);
memset(priv->cfg_bssid, 0, ETH_ALEN);
return 0;
}
/*
* This function informs the CFG802.11 subsystem of a new IBSS.
*
* The following information are sent to the CFG802.11 subsystem
* to register the new IBSS. If we do not register the new IBSS,
* a kernel panic will result.
* - SSID
* - SSID length
* - BSSID
* - Channel
*/
static int mwifiex_cfg80211_inform_ibss_bss(struct mwifiex_private *priv)
{
struct ieee80211_channel *chan;
struct mwifiex_bss_info bss_info;
struct cfg80211_bss *bss;
int ie_len;
u8 ie_buf[IEEE80211_MAX_SSID_LEN + sizeof(struct ieee_types_header)];
enum ieee80211_band band;
if (mwifiex_get_bss_info(priv, &bss_info))
return -1;
ie_buf[0] = WLAN_EID_SSID;
ie_buf[1] = bss_info.ssid.ssid_len;
memcpy(&ie_buf[sizeof(struct ieee_types_header)],
&bss_info.ssid.ssid, bss_info.ssid.ssid_len);
ie_len = ie_buf[1] + sizeof(struct ieee_types_header);
band = mwifiex_band_to_radio_type(priv->curr_bss_params.band);
chan = __ieee80211_get_channel(priv->wdev->wiphy,
ieee80211_channel_to_frequency(bss_info.bss_chan,
band));
bss = cfg80211_inform_bss(priv->wdev->wiphy, chan,
bss_info.bssid, 0, WLAN_CAPABILITY_IBSS,
0, ie_buf, ie_len, 0, GFP_KERNEL);
cfg80211_put_bss(priv->wdev->wiphy, bss);
memcpy(priv->cfg_bssid, bss_info.bssid, ETH_ALEN);
return 0;
}
/*
* This function connects with a BSS.
*
* This function handles both Infra and Ad-Hoc modes. It also performs
* validity checking on the provided parameters, disconnects from the
* current BSS (if any), sets up the association/scan parameters,
* including security settings, and performs specific SSID scan before
* trying to connect.
*
* For Infra mode, the function returns failure if the specified SSID
* is not found in scan table. However, for Ad-Hoc mode, it can create
* the IBSS if it does not exist. On successful completion in either case,
* the function notifies the CFG802.11 subsystem of the new BSS connection.
*/
static int
mwifiex_cfg80211_assoc(struct mwifiex_private *priv, size_t ssid_len, u8 *ssid,
u8 *bssid, int mode, struct ieee80211_channel *channel,
struct cfg80211_connect_params *sme, bool privacy)
{
struct cfg80211_ssid req_ssid;
int ret, auth_type = 0;
struct cfg80211_bss *bss = NULL;
u8 is_scanning_required = 0;
memset(&req_ssid, 0, sizeof(struct cfg80211_ssid));
req_ssid.ssid_len = ssid_len;
if (ssid_len > IEEE80211_MAX_SSID_LEN) {
dev_err(priv->adapter->dev, "invalid SSID - aborting\n");
return -EINVAL;
}
memcpy(req_ssid.ssid, ssid, ssid_len);
if (!req_ssid.ssid_len || req_ssid.ssid[0] < 0x20) {
dev_err(priv->adapter->dev, "invalid SSID - aborting\n");
return -EINVAL;
}
/* disconnect before try to associate */
mwifiex_deauthenticate(priv, NULL);
/* As this is new association, clear locally stored
* keys and security related flags */
priv->sec_info.wpa_enabled = false;
priv->sec_info.wpa2_enabled = false;
priv->wep_key_curr_index = 0;
priv->sec_info.encryption_mode = 0;
priv->sec_info.is_authtype_auto = 0;
ret = mwifiex_set_encode(priv, NULL, NULL, 0, 0, NULL, 1);
if (mode == NL80211_IFTYPE_ADHOC) {
/* "privacy" is set only for ad-hoc mode */
if (privacy) {
/*
* Keep WLAN_CIPHER_SUITE_WEP104 for now so that
* the firmware can find a matching network from the
* scan. The cfg80211 does not give us the encryption
* mode at this stage so just setting it to WEP here.
*/
priv->sec_info.encryption_mode =
WLAN_CIPHER_SUITE_WEP104;
priv->sec_info.authentication_mode =
NL80211_AUTHTYPE_OPEN_SYSTEM;
}
goto done;
}
/* Now handle infra mode. "sme" is valid for infra mode only */
if (sme->auth_type == NL80211_AUTHTYPE_AUTOMATIC) {
auth_type = NL80211_AUTHTYPE_OPEN_SYSTEM;
priv->sec_info.is_authtype_auto = 1;
} else {
auth_type = sme->auth_type;
}
if (sme->crypto.n_ciphers_pairwise) {
priv->sec_info.encryption_mode =
sme->crypto.ciphers_pairwise[0];
priv->sec_info.authentication_mode = auth_type;
}
if (sme->crypto.cipher_group) {
priv->sec_info.encryption_mode = sme->crypto.cipher_group;
priv->sec_info.authentication_mode = auth_type;
}
if (sme->ie)
ret = mwifiex_set_gen_ie(priv, sme->ie, sme->ie_len);
if (sme->key) {
if (mwifiex_is_alg_wep(priv->sec_info.encryption_mode)) {
dev_dbg(priv->adapter->dev,
"info: setting wep encryption"
" with key len %d\n", sme->key_len);
priv->wep_key_curr_index = sme->key_idx;
ret = mwifiex_set_encode(priv, NULL, sme->key,
sme->key_len, sme->key_idx,
NULL, 0);
}
}
done:
/*
* Scan entries are valid for some time (15 sec). So we can save one
* active scan time if we just try cfg80211_get_bss first. If it fails
* then request scan and cfg80211_get_bss() again for final output.
*/
while (1) {
if (is_scanning_required) {
/* Do specific SSID scanning */
if (mwifiex_request_scan(priv, &req_ssid)) {
dev_err(priv->adapter->dev, "scan error\n");
return -EFAULT;
}
}
/* Find the BSS we want using available scan results */
if (mode == NL80211_IFTYPE_ADHOC)
bss = cfg80211_get_bss(priv->wdev->wiphy, channel,
bssid, ssid, ssid_len,
WLAN_CAPABILITY_IBSS,
WLAN_CAPABILITY_IBSS);
else
bss = cfg80211_get_bss(priv->wdev->wiphy, channel,
bssid, ssid, ssid_len,
WLAN_CAPABILITY_ESS,
WLAN_CAPABILITY_ESS);
if (!bss) {
if (is_scanning_required) {
dev_warn(priv->adapter->dev,
"assoc: requested bss not found in scan results\n");
break;
}
is_scanning_required = 1;
} else {
dev_dbg(priv->adapter->dev,
"info: trying to associate to '%s' bssid %pM\n",
(char *) req_ssid.ssid, bss->bssid);
memcpy(&priv->cfg_bssid, bss->bssid, ETH_ALEN);
break;
}
}
ret = mwifiex_bss_start(priv, bss, &req_ssid);
if (ret)
return ret;
if (mode == NL80211_IFTYPE_ADHOC) {
/* Inform the BSS information to kernel, otherwise
* kernel will give a panic after successful assoc */
if (mwifiex_cfg80211_inform_ibss_bss(priv))
return -EFAULT;
}
return ret;
}
/*
* CFG802.11 operation handler for association request.
*
* This function does not work when the current mode is set to Ad-Hoc, or
* when there is already an association procedure going on. The given BSS
* information is used to associate.
*/
static int
mwifiex_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_connect_params *sme)
{
struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
int ret = 0;
if (priv->bss_mode == NL80211_IFTYPE_ADHOC) {
wiphy_err(wiphy, "received infra assoc request "
"when station is in ibss mode\n");
goto done;
}
if (priv->bss_mode == NL80211_IFTYPE_AP) {
wiphy_err(wiphy, "skip association request for AP interface\n");
goto done;
}
wiphy_dbg(wiphy, "info: Trying to associate to %s and bssid %pM\n",
(char *) sme->ssid, sme->bssid);
ret = mwifiex_cfg80211_assoc(priv, sme->ssid_len, sme->ssid, sme->bssid,
priv->bss_mode, sme->channel, sme, 0);
done:
if (!ret) {
cfg80211_connect_result(priv->netdev, priv->cfg_bssid, NULL, 0,
NULL, 0, WLAN_STATUS_SUCCESS,
GFP_KERNEL);
dev_dbg(priv->adapter->dev,
"info: associated to bssid %pM successfully\n",
priv->cfg_bssid);
} else {
dev_dbg(priv->adapter->dev,
"info: association to bssid %pM failed\n",
priv->cfg_bssid);
memset(priv->cfg_bssid, 0, ETH_ALEN);
if (ret > 0)
cfg80211_connect_result(priv->netdev, priv->cfg_bssid,
NULL, 0, NULL, 0, ret,
GFP_KERNEL);
else
cfg80211_connect_result(priv->netdev, priv->cfg_bssid,
NULL, 0, NULL, 0,
WLAN_STATUS_UNSPECIFIED_FAILURE,
GFP_KERNEL);
}
return 0;
}
/*
* This function sets following parameters for ibss network.
* - channel
* - start band
* - 11n flag
* - secondary channel offset
*/
static int mwifiex_set_ibss_params(struct mwifiex_private *priv,
struct cfg80211_ibss_params *params)
{
struct wiphy *wiphy = priv->wdev->wiphy;
struct mwifiex_adapter *adapter = priv->adapter;
int index = 0, i;
u8 config_bands = 0;
if (params->chandef.chan->band == IEEE80211_BAND_2GHZ) {
if (!params->basic_rates) {
config_bands = BAND_B | BAND_G;
} else {
for (i = 0; i < mwifiex_band_2ghz.n_bitrates; i++) {
/*
* Rates below 6 Mbps in the table are CCK
* rates; 802.11b and from 6 they are OFDM;
* 802.11G
*/
if (mwifiex_rates[i].bitrate == 60) {
index = 1 << i;
break;
}
}
if (params->basic_rates < index) {
config_bands = BAND_B;
} else {
config_bands = BAND_G;
if (params->basic_rates % index)
config_bands |= BAND_B;
}
}
if (cfg80211_get_chandef_type(&params->chandef) !=
NL80211_CHAN_NO_HT)
config_bands |= BAND_G | BAND_GN;
} else {
if (cfg80211_get_chandef_type(&params->chandef) ==
NL80211_CHAN_NO_HT)
config_bands = BAND_A;
else
config_bands = BAND_AN | BAND_A;
}
if (!((config_bands | adapter->fw_bands) & ~adapter->fw_bands)) {
adapter->config_bands = config_bands;
adapter->adhoc_start_band = config_bands;
if ((config_bands & BAND_GN) || (config_bands & BAND_AN))
adapter->adhoc_11n_enabled = true;
else
adapter->adhoc_11n_enabled = false;
}
adapter->sec_chan_offset =
mwifiex_chan_type_to_sec_chan_offset(
cfg80211_get_chandef_type(&params->chandef));
priv->adhoc_channel = ieee80211_frequency_to_channel(
params->chandef.chan->center_freq);
wiphy_dbg(wiphy, "info: set ibss band %d, chan %d, chan offset %d\n",
config_bands, priv->adhoc_channel, adapter->sec_chan_offset);
return 0;
}
/*
* CFG802.11 operation handler to join an IBSS.
*
* This function does not work in any mode other than Ad-Hoc, or if
* a join operation is already in progress.
*/
static int
mwifiex_cfg80211_join_ibss(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_ibss_params *params)
{
struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
int ret = 0;
if (priv->bss_mode != NL80211_IFTYPE_ADHOC) {
wiphy_err(wiphy, "request to join ibss received "
"when station is not in ibss mode\n");
goto done;
}
wiphy_dbg(wiphy, "info: trying to join to %s and bssid %pM\n",
(char *) params->ssid, params->bssid);
mwifiex_set_ibss_params(priv, params);
ret = mwifiex_cfg80211_assoc(priv, params->ssid_len, params->ssid,
params->bssid, priv->bss_mode,
params->chandef.chan, NULL,
params->privacy);
done:
if (!ret) {
cfg80211_ibss_joined(priv->netdev, priv->cfg_bssid, GFP_KERNEL);
dev_dbg(priv->adapter->dev,
"info: joined/created adhoc network with bssid"
" %pM successfully\n", priv->cfg_bssid);
} else {
dev_dbg(priv->adapter->dev,
"info: failed creating/joining adhoc network\n");
}
return ret;
}
/*
* CFG802.11 operation handler to leave an IBSS.
*
* This function does not work if a leave operation is
* already in progress.
*/
static int
mwifiex_cfg80211_leave_ibss(struct wiphy *wiphy, struct net_device *dev)
{
struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
wiphy_dbg(wiphy, "info: disconnecting from essid %pM\n",
priv->cfg_bssid);
if (mwifiex_deauthenticate(priv, NULL))
return -EFAULT;
memset(priv->cfg_bssid, 0, ETH_ALEN);
return 0;
}
/*
* CFG802.11 operation handler for scan request.
*
* This function issues a scan request to the firmware based upon
* the user specified scan configuration. On successfull completion,
* it also informs the results.
*/
static int
mwifiex_cfg80211_scan(struct wiphy *wiphy,
struct cfg80211_scan_request *request)
{
struct net_device *dev = request->wdev->netdev;
struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
int i, offset, ret;
struct ieee80211_channel *chan;
struct ieee_types_header *ie;
wiphy_dbg(wiphy, "info: received scan request on %s\n", dev->name);
if ((request->flags & NL80211_SCAN_FLAG_LOW_PRIORITY) &&
atomic_read(&priv->wmm.tx_pkts_queued) >=
MWIFIEX_MIN_TX_PENDING_TO_CANCEL_SCAN) {
dev_dbg(priv->adapter->dev, "scan rejected due to traffic\n");
return -EBUSY;
}
if (priv->user_scan_cfg) {
dev_err(priv->adapter->dev, "cmd: Scan already in process..\n");
return -EBUSY;
}
priv->user_scan_cfg = kzalloc(sizeof(struct mwifiex_user_scan_cfg),
GFP_KERNEL);
if (!priv->user_scan_cfg)
return -ENOMEM;
priv->scan_request = request;
priv->user_scan_cfg->num_ssids = request->n_ssids;
priv->user_scan_cfg->ssid_list = request->ssids;
if (request->ie && request->ie_len) {
offset = 0;
for (i = 0; i < MWIFIEX_MAX_VSIE_NUM; i++) {
if (priv->vs_ie[i].mask != MWIFIEX_VSIE_MASK_CLEAR)
continue;
priv->vs_ie[i].mask = MWIFIEX_VSIE_MASK_SCAN;
ie = (struct ieee_types_header *)(request->ie + offset);
memcpy(&priv->vs_ie[i].ie, ie, sizeof(*ie) + ie->len);
offset += sizeof(*ie) + ie->len;
if (offset >= request->ie_len)
break;
}
}
for (i = 0; i < request->n_channels; i++) {
chan = request->channels[i];
priv->user_scan_cfg->chan_list[i].chan_number = chan->hw_value;
priv->user_scan_cfg->chan_list[i].radio_type = chan->band;
if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)
priv->user_scan_cfg->chan_list[i].scan_type =
MWIFIEX_SCAN_TYPE_PASSIVE;
else
priv->user_scan_cfg->chan_list[i].scan_type =
MWIFIEX_SCAN_TYPE_ACTIVE;
priv->user_scan_cfg->chan_list[i].scan_time = 0;
}
ret = mwifiex_scan_networks(priv, priv->user_scan_cfg);
if (ret) {
dev_err(priv->adapter->dev, "scan failed: %d\n", ret);
priv->scan_request = NULL;
kfree(priv->user_scan_cfg);
priv->user_scan_cfg = NULL;
return ret;
}
if (request->ie && request->ie_len) {
for (i = 0; i < MWIFIEX_MAX_VSIE_NUM; i++) {
if (priv->vs_ie[i].mask == MWIFIEX_VSIE_MASK_SCAN) {
priv->vs_ie[i].mask = MWIFIEX_VSIE_MASK_CLEAR;
memset(&priv->vs_ie[i].ie, 0,
MWIFIEX_MAX_VSIE_LEN);
}
}
}
return 0;
}
static void mwifiex_setup_vht_caps(struct ieee80211_sta_vht_cap *vht_info,
struct mwifiex_private *priv)
{
struct mwifiex_adapter *adapter = priv->adapter;
u32 vht_cap = 0, cap = adapter->hw_dot_11ac_dev_cap;
vht_info->vht_supported = true;
switch (GET_VHTCAP_MAXMPDULEN(cap)) {
case 0x00:
vht_cap |= IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895;
break;
case 0x01:
vht_cap |= IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991;
break;
case 0x10:
vht_cap |= IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454;
break;
default:
dev_err(adapter->dev, "unsupported MAX MPDU len\n");
break;
}
if (ISSUPP_11ACVHTHTCVHT(cap))
vht_cap |= IEEE80211_VHT_CAP_HTC_VHT;
if (ISSUPP_11ACVHTTXOPPS(cap))
vht_cap |= IEEE80211_VHT_CAP_VHT_TXOP_PS;
if (ISSUPP_11ACMURXBEAMFORMEE(cap))
vht_cap |= IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE;
if (ISSUPP_11ACMUTXBEAMFORMEE(cap))
vht_cap |= IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
if (ISSUPP_11ACSUBEAMFORMER(cap))
vht_cap |= IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE;
if (ISSUPP_11ACSUBEAMFORMEE(cap))
vht_cap |= IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE;
if (ISSUPP_11ACRXSTBC(cap))
vht_cap |= IEEE80211_VHT_CAP_RXSTBC_1;
if (ISSUPP_11ACTXSTBC(cap))
vht_cap |= IEEE80211_VHT_CAP_TXSTBC;
if (ISSUPP_11ACSGI160(cap))
vht_cap |= IEEE80211_VHT_CAP_SHORT_GI_160;
if (ISSUPP_11ACSGI80(cap))
vht_cap |= IEEE80211_VHT_CAP_SHORT_GI_80;
if (ISSUPP_11ACLDPC(cap))
vht_cap |= IEEE80211_VHT_CAP_RXLDPC;
if (ISSUPP_11ACBW8080(cap))
vht_cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ;
if (ISSUPP_11ACBW160(cap))
vht_cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
vht_info->cap = vht_cap;
/* Update MCS support for VHT */
vht_info->vht_mcs.rx_mcs_map = cpu_to_le16(
adapter->hw_dot_11ac_mcs_support & 0xFFFF);
vht_info->vht_mcs.rx_highest = 0;
vht_info->vht_mcs.tx_mcs_map = cpu_to_le16(
adapter->hw_dot_11ac_mcs_support >> 16);
vht_info->vht_mcs.tx_highest = 0;
}
/*
* This function sets up the CFG802.11 specific HT capability fields
* with default values.
*
* The following default values are set -
* - HT Supported = True
* - Maximum AMPDU length factor = IEEE80211_HT_MAX_AMPDU_64K
* - Minimum AMPDU spacing = IEEE80211_HT_MPDU_DENSITY_NONE
* - HT Capabilities supported by firmware
* - MCS information, Rx mask = 0xff
* - MCD information, Tx parameters = IEEE80211_HT_MCS_TX_DEFINED (0x01)
*/
static void
mwifiex_setup_ht_caps(struct ieee80211_sta_ht_cap *ht_info,
struct mwifiex_private *priv)
{
int rx_mcs_supp;
struct ieee80211_mcs_info mcs_set;
u8 *mcs = (u8 *)&mcs_set;
struct mwifiex_adapter *adapter = priv->adapter;
ht_info->ht_supported = true;
ht_info->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
ht_info->ampdu_density = IEEE80211_HT_MPDU_DENSITY_NONE;
memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
/* Fill HT capability information */
if (ISSUPP_CHANWIDTH40(adapter->hw_dot_11n_dev_cap))
ht_info->cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
else
ht_info->cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
if (ISSUPP_SHORTGI20(adapter->hw_dot_11n_dev_cap))
ht_info->cap |= IEEE80211_HT_CAP_SGI_20;
else
ht_info->cap &= ~IEEE80211_HT_CAP_SGI_20;
if (ISSUPP_SHORTGI40(adapter->hw_dot_11n_dev_cap))
ht_info->cap |= IEEE80211_HT_CAP_SGI_40;
else
ht_info->cap &= ~IEEE80211_HT_CAP_SGI_40;
if (ISSUPP_RXSTBC(adapter->hw_dot_11n_dev_cap))
ht_info->cap |= 1 << IEEE80211_HT_CAP_RX_STBC_SHIFT;
else
ht_info->cap &= ~(3 << IEEE80211_HT_CAP_RX_STBC_SHIFT);
if (ISSUPP_TXSTBC(adapter->hw_dot_11n_dev_cap))
ht_info->cap |= IEEE80211_HT_CAP_TX_STBC;
else
ht_info->cap &= ~IEEE80211_HT_CAP_TX_STBC;
if (ISSUPP_GREENFIELD(adapter->hw_dot_11n_dev_cap))
ht_info->cap |= IEEE80211_HT_CAP_GRN_FLD;
else
ht_info->cap &= ~IEEE80211_HT_CAP_GRN_FLD;
if (ISENABLED_40MHZ_INTOLERANT(adapter->hw_dot_11n_dev_cap))
ht_info->cap |= IEEE80211_HT_CAP_40MHZ_INTOLERANT;
else
ht_info->cap &= ~IEEE80211_HT_CAP_40MHZ_INTOLERANT;
if (ISSUPP_RXLDPC(adapter->hw_dot_11n_dev_cap))
ht_info->cap |= IEEE80211_HT_CAP_LDPC_CODING;
else
ht_info->cap &= ~IEEE80211_HT_CAP_LDPC_CODING;
ht_info->cap &= ~IEEE80211_HT_CAP_MAX_AMSDU;
ht_info->cap |= IEEE80211_HT_CAP_SM_PS;
rx_mcs_supp = GET_RXMCSSUPP(adapter->hw_dev_mcs_support);
/* Set MCS for 1x1 */
memset(mcs, 0xff, rx_mcs_supp);
/* Clear all the other values */
memset(&mcs[rx_mcs_supp], 0,
sizeof(struct ieee80211_mcs_info) - rx_mcs_supp);
if (priv->bss_mode == NL80211_IFTYPE_STATION ||
ISSUPP_CHANWIDTH40(adapter->hw_dot_11n_dev_cap))
/* Set MCS32 for infra mode or ad-hoc mode with 40MHz support */
SETHT_MCS32(mcs_set.rx_mask);
memcpy((u8 *) &ht_info->mcs, mcs, sizeof(struct ieee80211_mcs_info));
ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
}
/*
* create a new virtual interface with the given name
*/
struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy,
const char *name,
enum nl80211_iftype type,
u32 *flags,
struct vif_params *params)
{
struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy);
struct mwifiex_private *priv;
struct net_device *dev;
void *mdev_priv;
struct wireless_dev *wdev;
if (!adapter)
return ERR_PTR(-EFAULT);
switch (type) {
case NL80211_IFTYPE_UNSPECIFIED:
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
priv = adapter->priv[MWIFIEX_BSS_TYPE_STA];
if (priv->bss_mode) {
wiphy_err(wiphy,
"cannot create multiple sta/adhoc ifaces\n");
return ERR_PTR(-EINVAL);
}
wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
if (!wdev)
return ERR_PTR(-ENOMEM);
wdev->wiphy = wiphy;
priv->wdev = wdev;
wdev->iftype = NL80211_IFTYPE_STATION;
if (type == NL80211_IFTYPE_UNSPECIFIED)
priv->bss_mode = NL80211_IFTYPE_STATION;
else
priv->bss_mode = type;
priv->bss_type = MWIFIEX_BSS_TYPE_STA;
priv->frame_type = MWIFIEX_DATA_FRAME_TYPE_ETH_II;
priv->bss_priority = 0;
priv->bss_role = MWIFIEX_BSS_ROLE_STA;
priv->bss_num = 0;
break;
case NL80211_IFTYPE_AP:
priv = adapter->priv[MWIFIEX_BSS_TYPE_UAP];
if (priv->bss_mode) {
wiphy_err(wiphy, "Can't create multiple AP interfaces");
return ERR_PTR(-EINVAL);
}
wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
if (!wdev)
return ERR_PTR(-ENOMEM);
priv->wdev = wdev;
wdev->wiphy = wiphy;
wdev->iftype = NL80211_IFTYPE_AP;
priv->bss_type = MWIFIEX_BSS_TYPE_UAP;
priv->frame_type = MWIFIEX_DATA_FRAME_TYPE_ETH_II;
priv->bss_priority = 0;
priv->bss_role = MWIFIEX_BSS_ROLE_UAP;
priv->bss_started = 0;
priv->bss_num = 0;
priv->bss_mode = type;
break;
case NL80211_IFTYPE_P2P_CLIENT:
priv = adapter->priv[MWIFIEX_BSS_TYPE_P2P];
if (priv->bss_mode) {
wiphy_err(wiphy, "Can't create multiple P2P ifaces");
return ERR_PTR(-EINVAL);
}
wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
if (!wdev)
return ERR_PTR(-ENOMEM);
priv->wdev = wdev;
wdev->wiphy = wiphy;
/* At start-up, wpa_supplicant tries to change the interface
* to NL80211_IFTYPE_STATION if it is not managed mode.
* So, we initialize it to STA mode.
*/
wdev->iftype = NL80211_IFTYPE_STATION;
priv->bss_mode = NL80211_IFTYPE_STATION;
/* Setting bss_type to P2P tells firmware that this interface
* is receiving P2P peers found during find phase and doing
* action frame handshake.
*/
priv->bss_type = MWIFIEX_BSS_TYPE_P2P;
priv->frame_type = MWIFIEX_DATA_FRAME_TYPE_ETH_II;
priv->bss_priority = MWIFIEX_BSS_ROLE_STA;
priv->bss_role = MWIFIEX_BSS_ROLE_STA;
priv->bss_started = 0;
priv->bss_num = 0;
break;
default:
wiphy_err(wiphy, "type not supported\n");
return ERR_PTR(-EINVAL);
}
dev = alloc_netdev_mqs(sizeof(struct mwifiex_private *), name,
ether_setup, IEEE80211_NUM_ACS, 1);
if (!dev) {
wiphy_err(wiphy, "no memory available for netdevice\n");
priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED;
return ERR_PTR(-ENOMEM);
}
mwifiex_init_priv_params(priv, dev);
priv->netdev = dev;
mwifiex_setup_ht_caps(&wiphy->bands[IEEE80211_BAND_2GHZ]->ht_cap, priv);
if (adapter->is_hw_11ac_capable)
mwifiex_setup_vht_caps(
&wiphy->bands[IEEE80211_BAND_2GHZ]->vht_cap, priv);
if (adapter->config_bands & BAND_A)
mwifiex_setup_ht_caps(
&wiphy->bands[IEEE80211_BAND_5GHZ]->ht_cap, priv);
if ((adapter->config_bands & BAND_A) && adapter->is_hw_11ac_capable)
mwifiex_setup_vht_caps(
&wiphy->bands[IEEE80211_BAND_5GHZ]->vht_cap, priv);
dev_net_set(dev, wiphy_net(wiphy));
dev->ieee80211_ptr = priv->wdev;
dev->ieee80211_ptr->iftype = priv->bss_mode;
memcpy(dev->dev_addr, wiphy->perm_addr, ETH_ALEN);
SET_NETDEV_DEV(dev, wiphy_dev(wiphy));
dev->flags |= IFF_BROADCAST | IFF_MULTICAST;
dev->watchdog_timeo = MWIFIEX_DEFAULT_WATCHDOG_TIMEOUT;
dev->hard_header_len += MWIFIEX_MIN_DATA_HEADER_LEN;
dev->ethtool_ops = &mwifiex_ethtool_ops;
mdev_priv = netdev_priv(dev);
*((unsigned long *) mdev_priv) = (unsigned long) priv;
SET_NETDEV_DEV(dev, adapter->dev);
/* Register network device */
if (register_netdevice(dev)) {
wiphy_err(wiphy, "cannot register virtual network device\n");
free_netdev(dev);
priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED;
return ERR_PTR(-EFAULT);
}
sema_init(&priv->async_sem, 1);
dev_dbg(adapter->dev, "info: %s: Marvell 802.11 Adapter\n", dev->name);
#ifdef CONFIG_DEBUG_FS
mwifiex_dev_debugfs_init(priv);
#endif
return wdev;
}
EXPORT_SYMBOL_GPL(mwifiex_add_virtual_intf);
/*
* del_virtual_intf: remove the virtual interface determined by dev
*/
int mwifiex_del_virtual_intf(struct wiphy *wiphy, struct wireless_dev *wdev)
{
struct mwifiex_private *priv = mwifiex_netdev_get_priv(wdev->netdev);
#ifdef CONFIG_DEBUG_FS
mwifiex_dev_debugfs_remove(priv);
#endif
mwifiex_stop_net_dev_queue(priv->netdev, priv->adapter);
if (netif_carrier_ok(priv->netdev))
netif_carrier_off(priv->netdev);
if (wdev->netdev->reg_state == NETREG_REGISTERED)
unregister_netdevice(wdev->netdev);
if (wdev->netdev->reg_state == NETREG_UNREGISTERED)
free_netdev(wdev->netdev);
/* Clear the priv in adapter */
priv->netdev = NULL;
priv->media_connected = false;
priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED;
return 0;
}
EXPORT_SYMBOL_GPL(mwifiex_del_virtual_intf);
/* station cfg80211 operations */
static struct cfg80211_ops mwifiex_cfg80211_ops = {
.add_virtual_intf = mwifiex_add_virtual_intf,
.del_virtual_intf = mwifiex_del_virtual_intf,
.change_virtual_intf = mwifiex_cfg80211_change_virtual_intf,
.scan = mwifiex_cfg80211_scan,
.connect = mwifiex_cfg80211_connect,
.disconnect = mwifiex_cfg80211_disconnect,
.get_station = mwifiex_cfg80211_get_station,
.dump_station = mwifiex_cfg80211_dump_station,
.set_wiphy_params = mwifiex_cfg80211_set_wiphy_params,
.join_ibss = mwifiex_cfg80211_join_ibss,
.leave_ibss = mwifiex_cfg80211_leave_ibss,
.add_key = mwifiex_cfg80211_add_key,
.del_key = mwifiex_cfg80211_del_key,
.mgmt_tx = mwifiex_cfg80211_mgmt_tx,
.mgmt_frame_register = mwifiex_cfg80211_mgmt_frame_register,
.remain_on_channel = mwifiex_cfg80211_remain_on_channel,
.cancel_remain_on_channel = mwifiex_cfg80211_cancel_remain_on_channel,
.set_default_key = mwifiex_cfg80211_set_default_key,
.set_power_mgmt = mwifiex_cfg80211_set_power_mgmt,
.set_tx_power = mwifiex_cfg80211_set_tx_power,
.set_bitrate_mask = mwifiex_cfg80211_set_bitrate_mask,
.start_ap = mwifiex_cfg80211_start_ap,
.stop_ap = mwifiex_cfg80211_stop_ap,
.change_beacon = mwifiex_cfg80211_change_beacon,
.set_cqm_rssi_config = mwifiex_cfg80211_set_cqm_rssi_config,
.set_antenna = mwifiex_cfg80211_set_antenna,
};
/*
* This function registers the device with CFG802.11 subsystem.
*
* The function creates the wireless device/wiphy, populates it with
* default parameters and handler function pointers, and finally
* registers the device.
*/
int mwifiex_register_cfg80211(struct mwifiex_adapter *adapter)
{
int ret;
void *wdev_priv;
struct wiphy *wiphy;
struct mwifiex_private *priv = adapter->priv[MWIFIEX_BSS_TYPE_STA];
u8 *country_code;
/* create a new wiphy for use with cfg80211 */
wiphy = wiphy_new(&mwifiex_cfg80211_ops,
sizeof(struct mwifiex_adapter *));
if (!wiphy) {
dev_err(adapter->dev, "%s: creating new wiphy\n", __func__);
return -ENOMEM;
}
wiphy->max_scan_ssids = MWIFIEX_MAX_SSID_LIST_LENGTH;
wiphy->max_scan_ie_len = MWIFIEX_MAX_VSIE_LEN;
wiphy->mgmt_stypes = mwifiex_mgmt_stypes;
wiphy->max_remain_on_channel_duration = 5000;
wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC) |
BIT(NL80211_IFTYPE_P2P_CLIENT) |
BIT(NL80211_IFTYPE_P2P_GO) |
BIT(NL80211_IFTYPE_AP);
wiphy->bands[IEEE80211_BAND_2GHZ] = &mwifiex_band_2ghz;
if (adapter->config_bands & BAND_A)
wiphy->bands[IEEE80211_BAND_5GHZ] = &mwifiex_band_5ghz;
else
wiphy->bands[IEEE80211_BAND_5GHZ] = NULL;
wiphy->iface_combinations = &mwifiex_iface_comb_ap_sta;
wiphy->n_iface_combinations = 1;
/* Initialize cipher suits */
wiphy->cipher_suites = mwifiex_cipher_suites;
wiphy->n_cipher_suites = ARRAY_SIZE(mwifiex_cipher_suites);
memcpy(wiphy->perm_addr, priv->curr_addr, ETH_ALEN);
wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
wiphy->flags |= WIPHY_FLAG_HAVE_AP_SME |
WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD |
WIPHY_FLAG_AP_UAPSD |
WIPHY_FLAG_CUSTOM_REGULATORY |
WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
wiphy_apply_custom_regulatory(wiphy, &mwifiex_world_regdom_custom);
wiphy->probe_resp_offload = NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS |
NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 |
NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P;
wiphy->available_antennas_tx = BIT(adapter->number_of_antenna) - 1;
wiphy->available_antennas_rx = BIT(adapter->number_of_antenna) - 1;
wiphy->features |= NL80211_FEATURE_HT_IBSS |
NL80211_FEATURE_INACTIVITY_TIMER |
NL80211_FEATURE_LOW_PRIORITY_SCAN;
/* Reserve space for mwifiex specific private data for BSS */
wiphy->bss_priv_size = sizeof(struct mwifiex_bss_priv);
wiphy->reg_notifier = mwifiex_reg_notifier;
/* Set struct mwifiex_adapter pointer in wiphy_priv */
wdev_priv = wiphy_priv(wiphy);
*(unsigned long *)wdev_priv = (unsigned long)adapter;
set_wiphy_dev(wiphy, priv->adapter->dev);
ret = wiphy_register(wiphy);
if (ret < 0) {
dev_err(adapter->dev,
"%s: wiphy_register failed: %d\n", __func__, ret);
wiphy_free(wiphy);
return ret;
}
country_code = mwifiex_11d_code_2_region(priv->adapter->region_code);
if (country_code)
dev_info(adapter->dev,
"ignoring F/W country code %2.2s\n", country_code);
adapter->wiphy = wiphy;
return ret;
}