ide: use ata_tf_protocols enums
* Add IDE_TFLAG_MULTI_PIO taskfile flag and set it for commands
using multi-PIO protocol.
* Use ata_tf_protocols enums instead of TASKFILE_* defines to
denote command's protocol and then rename ->data_phase field
to ->protocol.
* Remove no longer needed <linux/hdreg.h> includes.
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index d00d807..dae9d98 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -28,7 +28,6 @@
#include <linux/mutex.h>
#include <linux/leds.h>
#include <linux/ide.h>
-#include <linux/hdreg.h>
#include <asm/byteorder.h>
#include <asm/irq.h>
@@ -53,15 +52,6 @@
ATA_CMD_WRITE_EXT,
};
-static const u8 ide_data_phases[] = {
- TASKFILE_MULTI_IN,
- TASKFILE_MULTI_OUT,
- TASKFILE_IN,
- TASKFILE_OUT,
- TASKFILE_IN_DMA,
- TASKFILE_OUT_DMA,
-};
-
static void ide_tf_set_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 dma)
{
u8 index, lba48, write;
@@ -69,17 +59,19 @@
lba48 = (cmd->tf_flags & IDE_TFLAG_LBA48) ? 2 : 0;
write = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 1 : 0;
- if (dma)
+ if (dma) {
+ cmd->protocol = ATA_PROT_DMA;
index = 8;
- else
- index = drive->mult_count ? 0 : 4;
+ } else {
+ cmd->protocol = ATA_PROT_PIO;
+ if (drive->mult_count) {
+ cmd->tf_flags |= IDE_TFLAG_MULTI_PIO;
+ index = 0;
+ } else
+ index = 4;
+ }
cmd->tf.command = ide_rw_cmds[index + lba48 + write];
-
- if (dma)
- index = 8; /* fixup index */
-
- cmd->data_phase = ide_data_phases[index / 2 + write];
}
/*
@@ -401,9 +393,9 @@
cmd->tf.command = ATA_CMD_FLUSH_EXT;
else
cmd->tf.command = ATA_CMD_FLUSH;
- cmd->tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE |
- IDE_TFLAG_DYN;
- cmd->data_phase = TASKFILE_NO_DATA;
+ cmd->tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE |
+ IDE_TFLAG_DYN;
+ cmd->protocol = ATA_PROT_NODATA;
rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
rq->cmd_flags |= REQ_SOFTBARRIER;
diff --git a/drivers/ide/ide-disk_proc.c b/drivers/ide/ide-disk_proc.c
index afe4f47..eaea3be 100644
--- a/drivers/ide/ide-disk_proc.c
+++ b/drivers/ide/ide-disk_proc.c
@@ -1,6 +1,5 @@
#include <linux/kernel.h>
#include <linux/ide.h>
-#include <linux/hdreg.h>
#include "ide-disk.h"
@@ -30,8 +29,8 @@
tf->lbam = ATA_SMART_LBAM_PASS;
tf->lbah = ATA_SMART_LBAH_PASS;
tf->command = ATA_CMD_SMART;
- cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
- cmd.data_phase = TASKFILE_IN;
+ cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+ cmd.protocol = ATA_PROT_PIO;
return ide_raw_taskfile(drive, &cmd, buf, 1);
}
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 7917fa0..c27eaab 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -40,7 +40,6 @@
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/ide.h>
-#include <linux/hdreg.h>
#include <linux/completion.h>
#include <linux/reboot.h>
#include <linux/cdrom.h>
@@ -220,7 +219,7 @@
struct ide_cmd cmd;
memset(&cmd, 0, sizeof(cmd));
- cmd.data_phase = TASKFILE_NO_DATA;
+ cmd.protocol = ATA_PROT_NODATA;
if (s->b.set_geometry) {
s->b.set_geometry = 0;
@@ -314,15 +313,9 @@
struct ide_cmd *cmd = rq->special;
if (cmd) {
- switch (cmd->data_phase) {
- case TASKFILE_MULTI_OUT:
- case TASKFILE_OUT:
- case TASKFILE_MULTI_IN:
- case TASKFILE_IN:
+ if (cmd->protocol == ATA_PROT_PIO) {
ide_init_sg_cmd(cmd, rq->nr_sectors);
ide_map_sg(drive, rq);
- default:
- break;
}
return do_rw_taskfile(drive, cmd);
diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c
index 4953028..7701427 100644
--- a/drivers/ide/ide-ioctls.c
+++ b/drivers/ide/ide-ioctls.c
@@ -148,7 +148,7 @@
IDE_TFLAG_IN_NSECT;
}
tf->command = args[0];
- cmd.data_phase = args[3] ? TASKFILE_IN : TASKFILE_NO_DATA;
+ cmd.protocol = args[3] ? ATA_PROT_PIO : ATA_PROT_NODATA;
if (args[3]) {
cmd.tf_flags |= IDE_TFLAG_IO_16BIT;
diff --git a/drivers/ide/ide-park.c b/drivers/ide/ide-park.c
index 63c77f9..c575900 100644
--- a/drivers/ide/ide-park.c
+++ b/drivers/ide/ide-park.c
@@ -1,6 +1,5 @@
#include <linux/kernel.h>
#include <linux/ide.h>
-#include <linux/hdreg.h>
#include <linux/jiffies.h>
#include <linux/blkdev.h>
@@ -80,8 +79,9 @@
tf->command = ATA_CMD_CHK_POWER;
cmd.tf_flags |= IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+ cmd.protocol = ATA_PROT_NODATA;
+
cmd.rq = rq;
- cmd.data_phase = TASKFILE_NO_DATA;
return do_rw_taskfile(drive, &cmd);
}
diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c
index 5c9fc20..ebf2d21 100644
--- a/drivers/ide/ide-pm.c
+++ b/drivers/ide/ide-pm.c
@@ -1,6 +1,5 @@
#include <linux/kernel.h>
#include <linux/ide.h>
-#include <linux/hdreg.h>
int generic_ide_suspend(struct device *dev, pm_message_t mesg)
{
@@ -164,8 +163,8 @@
return ide_stopped;
out_do_tf:
- cmd->tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
- cmd->data_phase = TASKFILE_NO_DATA;
+ cmd->tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+ cmd->protocol = ATA_PROT_NODATA;
return do_rw_taskfile(drive, cmd);
}
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index 647216c..0c9d714 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -47,8 +47,8 @@
cmd.tf.command = ATA_CMD_ID_ATA;
else
cmd.tf.command = ATA_CMD_ID_ATAPI;
- cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
- cmd.data_phase = TASKFILE_IN;
+ cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+ cmd.protocol = ATA_PROT_PIO;
return ide_raw_taskfile(drive, &cmd, buf, 1);
}
@@ -66,13 +66,11 @@
const struct ide_tp_ops *tp_ops = hwif->tp_ops;
const struct ide_dma_ops *dma_ops = hwif->dma_ops;
- if (orig_cmd->data_phase == TASKFILE_MULTI_IN ||
- orig_cmd->data_phase == TASKFILE_MULTI_OUT) {
- if (!drive->mult_count) {
- printk(KERN_ERR "%s: multimode not set!\n",
- drive->name);
- return ide_stopped;
- }
+ if (orig_cmd->protocol == ATA_PROT_PIO &&
+ (orig_cmd->tf_flags & IDE_TFLAG_MULTI_PIO) &&
+ drive->mult_count == 0) {
+ printk(KERN_ERR "%s: multimode not set!\n", drive->name);
+ return ide_stopped;
}
if (orig_cmd->ftf_flags & IDE_FTFLAG_FLAGGED)
@@ -87,17 +85,16 @@
tp_ops->tf_load(drive, cmd);
}
- switch (cmd->data_phase) {
- case TASKFILE_MULTI_OUT:
- case TASKFILE_OUT:
- tp_ops->exec_command(hwif, tf->command);
- ndelay(400); /* FIXME */
- return pre_task_out_intr(drive, cmd);
- case TASKFILE_MULTI_IN:
- case TASKFILE_IN:
+ switch (cmd->protocol) {
+ case ATA_PROT_PIO:
+ if (cmd->tf_flags & IDE_TFLAG_WRITE) {
+ tp_ops->exec_command(hwif, tf->command);
+ ndelay(400); /* FIXME */
+ return pre_task_out_intr(drive, cmd);
+ }
handler = task_in_intr;
/* fall-through */
- case TASKFILE_NO_DATA:
+ case ATA_PROT_NODATA:
if (handler == NULL)
handler = task_no_data_intr;
ide_execute_command(drive, tf->command, handler,
@@ -115,9 +112,6 @@
}
EXPORT_SYMBOL_GPL(do_rw_taskfile);
-/*
- * Handler for commands without a data phase
- */
static ide_startstop_t task_no_data_intr(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
@@ -278,15 +272,10 @@
touch_softlockup_watchdog();
- switch (cmd->data_phase) {
- case TASKFILE_MULTI_IN:
- case TASKFILE_MULTI_OUT:
+ if (cmd->tf_flags & IDE_TFLAG_MULTI_PIO)
ide_pio_multi(drive, cmd, write);
- break;
- default:
+ else
ide_pio_sector(drive, cmd, write);
- break;
- }
drive->io_32bit = saved_io_32bit;
}
@@ -297,22 +286,12 @@
if (cmd->tf_flags & IDE_TFLAG_FS) {
int sectors = cmd->nsect - cmd->nleft;
- switch (cmd->data_phase) {
- case TASKFILE_IN:
- if (cmd->nleft)
- break;
- /* fall through */
- case TASKFILE_OUT:
- sectors--;
- break;
- case TASKFILE_MULTI_IN:
- if (cmd->nleft)
- break;
- /* fall through */
- case TASKFILE_MULTI_OUT:
- sectors -= drive->mult_count;
- default:
- break;
+ if (cmd->protocol == ATA_PROT_PIO &&
+ ((cmd->tf_flags & IDE_TFLAG_WRITE) || cmd->nleft == 0)) {
+ if (cmd->tf_flags & IDE_TFLAG_MULTI_PIO)
+ sectors -= drive->mult_count;
+ else
+ sectors--;
}
if (sectors > 0)
@@ -425,7 +404,7 @@
drive->bad_wstat, WAIT_DRQ)) {
printk(KERN_ERR "%s: no DRQ after issuing %sWRITE%s\n",
drive->name,
- cmd->data_phase == TASKFILE_MULTI_OUT ? "MULT" : "",
+ (cmd->tf_flags & IDE_TFLAG_MULTI_PIO) ? "MULT" : "",
(drive->dev_flags & IDE_DFLAG_LBA48) ? "_EXT" : "");
return startstop;
}
@@ -474,7 +453,7 @@
int ide_no_data_taskfile(ide_drive_t *drive, struct ide_cmd *cmd)
{
- cmd->data_phase = TASKFILE_NO_DATA;
+ cmd->protocol = ATA_PROT_NODATA;
return ide_raw_taskfile(drive, cmd, NULL, 0);
}
@@ -545,7 +524,6 @@
memcpy(&cmd.tf_array[6], req_task->io_ports,
HDIO_DRIVE_TASK_HDR_SIZE);
- cmd.data_phase = req_task->data_phase;
cmd.tf_flags = IDE_TFLAG_IO_16BIT | IDE_TFLAG_DEVICE |
IDE_TFLAG_IN_TF;
@@ -590,10 +568,12 @@
/* fixup data phase if needed */
if (req_task->data_phase == TASKFILE_IN_DMAQ ||
req_task->data_phase == TASKFILE_IN_DMA)
- cmd.data_phase = TASKFILE_OUT_DMA;
+ cmd.tf_flags |= IDE_TFLAG_WRITE;
}
- switch (cmd.data_phase) {
+ cmd.protocol = ATA_PROT_DMA;
+
+ switch (req_task->data_phase) {
case TASKFILE_MULTI_OUT:
if (!drive->mult_count) {
/* (hs): give up if multcount is not set */
@@ -603,8 +583,10 @@
err = -EPERM;
goto abort;
}
+ cmd.tf_flags |= IDE_TFLAG_MULTI_PIO;
/* fall through */
case TASKFILE_OUT:
+ cmd.protocol = ATA_PROT_PIO;
/* fall through */
case TASKFILE_OUT_DMAQ:
case TASKFILE_OUT_DMA:
@@ -621,8 +603,10 @@
err = -EPERM;
goto abort;
}
+ cmd.tf_flags |= IDE_TFLAG_MULTI_PIO;
/* fall through */
case TASKFILE_IN:
+ cmd.protocol = ATA_PROT_PIO;
/* fall through */
case TASKFILE_IN_DMAQ:
case TASKFILE_IN_DMA:
@@ -630,6 +614,7 @@
data_buf = inbuf;
break;
case TASKFILE_NO_DATA:
+ cmd.protocol = ATA_PROT_NODATA;
break;
default:
err = -EFAULT;