Merge branch 'remotes/lorenzo/pci/iproc'
- Add more devices to Broadcom PAXC quirk (Ray Jui)
- Work around corrupted Broadcom PAXC config space to enable SMMU and
GICv3 ITS (Ray Jui)
- Disable MSI parsing to work around broken Broadcom PAXC logic in some
devices (Ray Jui)
- Hide unconfigured functions to work around a Broadcom PAXC defect (Ray
Jui)
- Lower iproc log level to reduce console output during boot (Ray Jui)
* remotes/lorenzo/pci/iproc:
PCI: iproc: Reduce inbound/outbound mapping print level
PCI: iproc: Reject unconfigured physical functions from PAXC
PCI: iproc: Disable MSI parsing in certain PAXC blocks
PCI: iproc: Fix up corrupted PAXC root complex config registers
PCI: iproc: Activate PAXC bridge quirk for more devices
diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats b/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
new file mode 100644
index 0000000..4b0318c
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
@@ -0,0 +1,122 @@
+==========================
+PCIe Device AER statistics
+==========================
+These attributes show up under all the devices that are AER capable. These
+statistical counters indicate the errors "as seen/reported by the device".
+Note that this may mean that if an endpoint is causing problems, the AER
+counters may increment at its link partner (e.g. root port) because the
+errors may be "seen" / reported by the link partner and not the
+problematic endpoint itself (which may report all counters as 0 as it never
+saw any problems).
+
+Where: /sys/bus/pci/devices/<dev>/aer_dev_correctable
+Date: July 2018
+Kernel Version: 4.19.0
+Contact: linux-pci@vger.kernel.org, rajatja@google.com
+Description: List of correctable errors seen and reported by this
+ PCI device using ERR_COR. Note that since multiple errors may
+ be reported using a single ERR_COR message, thus
+ TOTAL_ERR_COR at the end of the file may not match the actual
+ total of all the errors in the file. Sample output:
+-------------------------------------------------------------------------
+localhost /sys/devices/pci0000:00/0000:00:1c.0 # cat aer_dev_correctable
+Receiver Error 2
+Bad TLP 0
+Bad DLLP 0
+RELAY_NUM Rollover 0
+Replay Timer Timeout 0
+Advisory Non-Fatal 0
+Corrected Internal Error 0
+Header Log Overflow 0
+TOTAL_ERR_COR 2
+-------------------------------------------------------------------------
+
+Where: /sys/bus/pci/devices/<dev>/aer_dev_fatal
+Date: July 2018
+Kernel Version: 4.19.0
+Contact: linux-pci@vger.kernel.org, rajatja@google.com
+Description: List of uncorrectable fatal errors seen and reported by this
+ PCI device using ERR_FATAL. Note that since multiple errors may
+ be reported using a single ERR_FATAL message, thus
+ TOTAL_ERR_FATAL at the end of the file may not match the actual
+ total of all the errors in the file. Sample output:
+-------------------------------------------------------------------------
+localhost /sys/devices/pci0000:00/0000:00:1c.0 # cat aer_dev_fatal
+Undefined 0
+Data Link Protocol 0
+Surprise Down Error 0
+Poisoned TLP 0
+Flow Control Protocol 0
+Completion Timeout 0
+Completer Abort 0
+Unexpected Completion 0
+Receiver Overflow 0
+Malformed TLP 0
+ECRC 0
+Unsupported Request 0
+ACS Violation 0
+Uncorrectable Internal Error 0
+MC Blocked TLP 0
+AtomicOp Egress Blocked 0
+TLP Prefix Blocked Error 0
+TOTAL_ERR_FATAL 0
+-------------------------------------------------------------------------
+
+Where: /sys/bus/pci/devices/<dev>/aer_dev_nonfatal
+Date: July 2018
+Kernel Version: 4.19.0
+Contact: linux-pci@vger.kernel.org, rajatja@google.com
+Description: List of uncorrectable nonfatal errors seen and reported by this
+ PCI device using ERR_NONFATAL. Note that since multiple errors
+ may be reported using a single ERR_FATAL message, thus
+ TOTAL_ERR_NONFATAL at the end of the file may not match the
+ actual total of all the errors in the file. Sample output:
+-------------------------------------------------------------------------
+localhost /sys/devices/pci0000:00/0000:00:1c.0 # cat aer_dev_nonfatal
+Undefined 0
+Data Link Protocol 0
+Surprise Down Error 0
+Poisoned TLP 0
+Flow Control Protocol 0
+Completion Timeout 0
+Completer Abort 0
+Unexpected Completion 0
+Receiver Overflow 0
+Malformed TLP 0
+ECRC 0
+Unsupported Request 0
+ACS Violation 0
+Uncorrectable Internal Error 0
+MC Blocked TLP 0
+AtomicOp Egress Blocked 0
+TLP Prefix Blocked Error 0
+TOTAL_ERR_NONFATAL 0
+-------------------------------------------------------------------------
+
+============================
+PCIe Rootport AER statistics
+============================
+These attributes show up under only the rootports (or root complex event
+collectors) that are AER capable. These indicate the number of error messages as
+"reported to" the rootport. Please note that the rootports also transmit
+(internally) the ERR_* messages for errors seen by the internal rootport PCI
+device, so these counters include them and are thus cumulative of all the error
+messages on the PCI hierarchy originating at that root port.
+
+Where: /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_cor
+Date: July 2018
+Kernel Version: 4.19.0
+Contact: linux-pci@vger.kernel.org, rajatja@google.com
+Description: Total number of ERR_COR messages reported to rootport.
+
+Where: /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_fatal
+Date: July 2018
+Kernel Version: 4.19.0
+Contact: linux-pci@vger.kernel.org, rajatja@google.com
+Description: Total number of ERR_FATAL messages reported to rootport.
+
+Where: /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_nonfatal
+Date: July 2018
+Kernel Version: 4.19.0
+Contact: linux-pci@vger.kernel.org, rajatja@google.com
+Description: Total number of ERR_NONFATAL messages reported to rootport.
diff --git a/Documentation/PCI/00-INDEX b/Documentation/PCI/00-INDEX
index 00c9a90..206b1d5 100644
--- a/Documentation/PCI/00-INDEX
+++ b/Documentation/PCI/00-INDEX
@@ -1,5 +1,7 @@
00-INDEX
- this file
+acpi-info.txt
+ - info on how PCI host bridges are represented in ACPI
MSI-HOWTO.txt
- the Message Signaled Interrupts (MSI) Driver Guide HOWTO and FAQ.
PCIEBUS-HOWTO.txt
diff --git a/Documentation/PCI/acpi-info.txt b/Documentation/PCI/acpi-info.txt
new file mode 100644
index 0000000..3ffa3b0
--- /dev/null
+++ b/Documentation/PCI/acpi-info.txt
@@ -0,0 +1,187 @@
+ ACPI considerations for PCI host bridges
+
+The general rule is that the ACPI namespace should describe everything the
+OS might use unless there's another way for the OS to find it [1, 2].
+
+For example, there's no standard hardware mechanism for enumerating PCI
+host bridges, so the ACPI namespace must describe each host bridge, the
+method for accessing PCI config space below it, the address space windows
+the host bridge forwards to PCI (using _CRS), and the routing of legacy
+INTx interrupts (using _PRT).
+
+PCI devices, which are below the host bridge, generally do not need to be
+described via ACPI. The OS can discover them via the standard PCI
+enumeration mechanism, using config accesses to discover and identify
+devices and read and size their BARs. However, ACPI may describe PCI
+devices if it provides power management or hotplug functionality for them
+or if the device has INTx interrupts connected by platform interrupt
+controllers and a _PRT is needed to describe those connections.
+
+ACPI resource description is done via _CRS objects of devices in the ACPI
+namespace [2]. The _CRS is like a generalized PCI BAR: the OS can read
+_CRS and figure out what resource is being consumed even if it doesn't have
+a driver for the device [3]. That's important because it means an old OS
+can work correctly even on a system with new devices unknown to the OS.
+The new devices might not do anything, but the OS can at least make sure no
+resources conflict with them.
+
+Static tables like MCFG, HPET, ECDT, etc., are *not* mechanisms for
+reserving address space. The static tables are for things the OS needs to
+know early in boot, before it can parse the ACPI namespace. If a new table
+is defined, an old OS needs to operate correctly even though it ignores the
+table. _CRS allows that because it is generic and understood by the old
+OS; a static table does not.
+
+If the OS is expected to manage a non-discoverable device described via
+ACPI, that device will have a specific _HID/_CID that tells the OS what
+driver to bind to it, and the _CRS tells the OS and the driver where the
+device's registers are.
+
+PCI host bridges are PNP0A03 or PNP0A08 devices. Their _CRS should
+describe all the address space they consume. This includes all the windows
+they forward down to the PCI bus, as well as registers of the host bridge
+itself that are not forwarded to PCI. The host bridge registers include
+things like secondary/subordinate bus registers that determine the bus
+range below the bridge, window registers that describe the apertures, etc.
+These are all device-specific, non-architected things, so the only way a
+PNP0A03/PNP0A08 driver can manage them is via _PRS/_CRS/_SRS, which contain
+the device-specific details. The host bridge registers also include ECAM
+space, since it is consumed by the host bridge.
+
+ACPI defines a Consumer/Producer bit to distinguish the bridge registers
+("Consumer") from the bridge apertures ("Producer") [4, 5], but early
+BIOSes didn't use that bit correctly. The result is that the current ACPI
+spec defines Consumer/Producer only for the Extended Address Space
+descriptors; the bit should be ignored in the older QWord/DWord/Word
+Address Space descriptors. Consequently, OSes have to assume all
+QWord/DWord/Word descriptors are windows.
+
+Prior to the addition of Extended Address Space descriptors, the failure of
+Consumer/Producer meant there was no way to describe bridge registers in
+the PNP0A03/PNP0A08 device itself. The workaround was to describe the
+bridge registers (including ECAM space) in PNP0C02 catch-all devices [6].
+With the exception of ECAM, the bridge register space is device-specific
+anyway, so the generic PNP0A03/PNP0A08 driver (pci_root.c) has no need to
+know about it.
+
+New architectures should be able to use "Consumer" Extended Address Space
+descriptors in the PNP0A03 device for bridge registers, including ECAM,
+although a strict interpretation of [6] might prohibit this. Old x86 and
+ia64 kernels assume all address space descriptors, including "Consumer"
+Extended Address Space ones, are windows, so it would not be safe to
+describe bridge registers this way on those architectures.
+
+PNP0C02 "motherboard" devices are basically a catch-all. There's no
+programming model for them other than "don't use these resources for
+anything else." So a PNP0C02 _CRS should claim any address space that is
+(1) not claimed by _CRS under any other device object in the ACPI namespace
+and (2) should not be assigned by the OS to something else.
+
+The PCIe spec requires the Enhanced Configuration Access Method (ECAM)
+unless there's a standard firmware interface for config access, e.g., the
+ia64 SAL interface [7]. A host bridge consumes ECAM memory address space
+and converts memory accesses into PCI configuration accesses. The spec
+defines the ECAM address space layout and functionality; only the base of
+the address space is device-specific. An ACPI OS learns the base address
+from either the static MCFG table or a _CBA method in the PNP0A03 device.
+
+The MCFG table must describe the ECAM space of non-hot pluggable host
+bridges [8]. Since MCFG is a static table and can't be updated by hotplug,
+a _CBA method in the PNP0A03 device describes the ECAM space of a
+hot-pluggable host bridge [9]. Note that for both MCFG and _CBA, the base
+address always corresponds to bus 0, even if the bus range below the bridge
+(which is reported via _CRS) doesn't start at 0.
+
+
+[1] ACPI 6.2, sec 6.1:
+ For any device that is on a non-enumerable type of bus (for example, an
+ ISA bus), OSPM enumerates the devices' identifier(s) and the ACPI
+ system firmware must supply an _HID object ... for each device to
+ enable OSPM to do that.
+
+[2] ACPI 6.2, sec 3.7:
+ The OS enumerates motherboard devices simply by reading through the
+ ACPI Namespace looking for devices with hardware IDs.
+
+ Each device enumerated by ACPI includes ACPI-defined objects in the
+ ACPI Namespace that report the hardware resources the device could
+ occupy [_PRS], an object that reports the resources that are currently
+ used by the device [_CRS], and objects for configuring those resources
+ [_SRS]. The information is used by the Plug and Play OS (OSPM) to
+ configure the devices.
+
+[3] ACPI 6.2, sec 6.2:
+ OSPM uses device configuration objects to configure hardware resources
+ for devices enumerated via ACPI. Device configuration objects provide
+ information about current and possible resource requirements, the
+ relationship between shared resources, and methods for configuring
+ hardware resources.
+
+ When OSPM enumerates a device, it calls _PRS to determine the resource
+ requirements of the device. It may also call _CRS to find the current
+ resource settings for the device. Using this information, the Plug and
+ Play system determines what resources the device should consume and
+ sets those resources by calling the device’s _SRS control method.
+
+ In ACPI, devices can consume resources (for example, legacy keyboards),
+ provide resources (for example, a proprietary PCI bridge), or do both.
+ Unless otherwise specified, resources for a device are assumed to be
+ taken from the nearest matching resource above the device in the device
+ hierarchy.
+
+[4] ACPI 6.2, sec 6.4.3.5.1, 2, 3, 4:
+ QWord/DWord/Word Address Space Descriptor (.1, .2, .3)
+ General Flags: Bit [0] Ignored
+
+ Extended Address Space Descriptor (.4)
+ General Flags: Bit [0] Consumer/Producer:
+ 1–This device consumes this resource
+ 0–This device produces and consumes this resource
+
+[5] ACPI 6.2, sec 19.6.43:
+ ResourceUsage specifies whether the Memory range is consumed by
+ this device (ResourceConsumer) or passed on to child devices
+ (ResourceProducer). If nothing is specified, then
+ ResourceConsumer is assumed.
+
+[6] PCI Firmware 3.2, sec 4.1.2:
+ If the operating system does not natively comprehend reserving the
+ MMCFG region, the MMCFG region must be reserved by firmware. The
+ address range reported in the MCFG table or by _CBA method (see Section
+ 4.1.3) must be reserved by declaring a motherboard resource. For most
+ systems, the motherboard resource would appear at the root of the ACPI
+ namespace (under \_SB) in a node with a _HID of EISAID (PNP0C02), and
+ the resources in this case should not be claimed in the root PCI bus’s
+ _CRS. The resources can optionally be returned in Int15 E820 or
+ EFIGetMemoryMap as reserved memory but must always be reported through
+ ACPI as a motherboard resource.
+
+[7] PCI Express 4.0, sec 7.2.2:
+ For systems that are PC-compatible, or that do not implement a
+ processor-architecture-specific firmware interface standard that allows
+ access to the Configuration Space, the ECAM is required as defined in
+ this section.
+
+[8] PCI Firmware 3.2, sec 4.1.2:
+ The MCFG table is an ACPI table that is used to communicate the base
+ addresses corresponding to the non-hot removable PCI Segment Groups
+ range within a PCI Segment Group available to the operating system at
+ boot. This is required for the PC-compatible systems.
+
+ The MCFG table is only used to communicate the base addresses
+ corresponding to the PCI Segment Groups available to the system at
+ boot.
+
+[9] PCI Firmware 3.2, sec 4.1.3:
+ The _CBA (Memory mapped Configuration Base Address) control method is
+ an optional ACPI object that returns the 64-bit memory mapped
+ configuration base address for the hot plug capable host bridge. The
+ base address returned by _CBA is processor-relative address. The _CBA
+ control method evaluates to an Integer.
+
+ This control method appears under a host bridge object. When the _CBA
+ method appears under an active host bridge object, the operating system
+ evaluates this structure to identify the memory mapped configuration
+ base address corresponding to the PCI Segment Group for the bus number
+ range specified in _CRS method. An ACPI name space object that contains
+ the _CBA method must also contain a corresponding _SEG method.
diff --git a/Documentation/PCI/endpoint/function/binding/pci-test.txt b/Documentation/PCI/endpoint/function/binding/pci-test.txt
index 3b68b95..cd76ba4 100644
--- a/Documentation/PCI/endpoint/function/binding/pci-test.txt
+++ b/Documentation/PCI/endpoint/function/binding/pci-test.txt
@@ -15,3 +15,5 @@
interrupt_pin : Should be 1 - INTA, 2 - INTB, 3 - INTC, 4 -INTD
msi_interrupts : Should be 1 to 32 depending on the number of MSI interrupts
to test
+msix_interrupts : Should be 1 to 2048 depending on the number of MSI-X
+ interrupts to test
diff --git a/Documentation/PCI/endpoint/pci-endpoint.txt b/Documentation/PCI/endpoint/pci-endpoint.txt
index 9b1d668..e86a96b 100644
--- a/Documentation/PCI/endpoint/pci-endpoint.txt
+++ b/Documentation/PCI/endpoint/pci-endpoint.txt
@@ -44,7 +44,7 @@
* clear_bar: ops to reset the BAR
* alloc_addr_space: ops to allocate in PCI controller address space
* free_addr_space: ops to free the allocated address space
- * raise_irq: ops to raise a legacy or MSI interrupt
+ * raise_irq: ops to raise a legacy, MSI or MSI-X interrupt
* start: ops to start the PCI link
* stop: ops to stop the PCI link
@@ -96,7 +96,7 @@
*) pci_epc_raise_irq()
The PCI endpoint function driver should use pci_epc_raise_irq() to raise
- Legacy Interrupt or MSI Interrupt.
+ Legacy Interrupt, MSI or MSI-X Interrupt.
*) pci_epc_mem_alloc_addr()
diff --git a/Documentation/PCI/endpoint/pci-test-function.txt b/Documentation/PCI/endpoint/pci-test-function.txt
index 0c519c9..5916f1f 100644
--- a/Documentation/PCI/endpoint/pci-test-function.txt
+++ b/Documentation/PCI/endpoint/pci-test-function.txt
@@ -20,6 +20,8 @@
5) PCI_ENDPOINT_TEST_DST_ADDR
6) PCI_ENDPOINT_TEST_SIZE
7) PCI_ENDPOINT_TEST_CHECKSUM
+ 8) PCI_ENDPOINT_TEST_IRQ_TYPE
+ 9) PCI_ENDPOINT_TEST_IRQ_NUMBER
*) PCI_ENDPOINT_TEST_MAGIC
@@ -34,10 +36,10 @@
Bitfield Description:
Bit 0 : raise legacy IRQ
Bit 1 : raise MSI IRQ
- Bit 2 - 7 : MSI interrupt number
- Bit 8 : read command (read data from RC buffer)
- Bit 9 : write command (write data to RC buffer)
- Bit 10 : copy command (copy data from one RC buffer to another
+ Bit 2 : raise MSI-X IRQ
+ Bit 3 : read command (read data from RC buffer)
+ Bit 4 : write command (write data to RC buffer)
+ Bit 5 : copy command (copy data from one RC buffer to another
RC buffer)
*) PCI_ENDPOINT_TEST_STATUS
@@ -64,3 +66,22 @@
This register contains the destination address (RC buffer address) for
the COPY/WRITE command.
+
+*) PCI_ENDPOINT_TEST_IRQ_TYPE
+
+This register contains the interrupt type (Legacy/MSI) triggered
+for the READ/WRITE/COPY and raise IRQ (Legacy/MSI) commands.
+
+Possible types:
+ - Legacy : 0
+ - MSI : 1
+ - MSI-X : 2
+
+*) PCI_ENDPOINT_TEST_IRQ_NUMBER
+
+This register contains the triggered ID interrupt.
+
+Admissible values:
+ - Legacy : 0
+ - MSI : [1 .. 32]
+ - MSI-X : [1 .. 2048]
diff --git a/Documentation/PCI/endpoint/pci-test-howto.txt b/Documentation/PCI/endpoint/pci-test-howto.txt
index 75f48c3..e40cf0f 100644
--- a/Documentation/PCI/endpoint/pci-test-howto.txt
+++ b/Documentation/PCI/endpoint/pci-test-howto.txt
@@ -45,9 +45,9 @@
configurable fields.
# ls functions/pci_epf_test/func1
- baseclass_code interrupt_pin revid subsys_vendor_id
- cache_line_size msi_interrupts subclass_code vendorid
- deviceid progif_code subsys_id
+ baseclass_code interrupt_pin progif_code subsys_id
+ cache_line_size msi_interrupts revid subsys_vendorid
+ deviceid msix_interrupts subclass_code vendorid
The PCI endpoint function driver populates these entries with default values
when the device is bound to the driver. The pci-epf-test driver populates
@@ -67,6 +67,7 @@
# echo 0x104c > functions/pci_epf_test/func1/vendorid
# echo 0xb500 > functions/pci_epf_test/func1/deviceid
# echo 16 > functions/pci_epf_test/func1/msi_interrupts
+ # echo 8 > functions/pci_epf_test/func1/msix_interrupts
1.5 Binding pci-epf-test Device to EP Controller
@@ -120,7 +121,9 @@
Interrupt tests
+ SET IRQ TYPE TO LEGACY: OKAY
LEGACY IRQ: NOT OKAY
+ SET IRQ TYPE TO MSI: OKAY
MSI1: OKAY
MSI2: OKAY
MSI3: OKAY
@@ -153,9 +156,30 @@
MSI30: NOT OKAY
MSI31: NOT OKAY
MSI32: NOT OKAY
+ SET IRQ TYPE TO MSI-X: OKAY
+ MSI-X1: OKAY
+ MSI-X2: OKAY
+ MSI-X3: OKAY
+ MSI-X4: OKAY
+ MSI-X5: OKAY
+ MSI-X6: OKAY
+ MSI-X7: OKAY
+ MSI-X8: OKAY
+ MSI-X9: NOT OKAY
+ MSI-X10: NOT OKAY
+ MSI-X11: NOT OKAY
+ MSI-X12: NOT OKAY
+ MSI-X13: NOT OKAY
+ MSI-X14: NOT OKAY
+ MSI-X15: NOT OKAY
+ MSI-X16: NOT OKAY
+ [...]
+ MSI-X2047: NOT OKAY
+ MSI-X2048: NOT OKAY
Read Tests
+ SET IRQ TYPE TO MSI: OKAY
READ ( 1 bytes): OKAY
READ ( 1024 bytes): OKAY
READ ( 1025 bytes): OKAY
diff --git a/Documentation/PCI/pcieaer-howto.txt b/Documentation/PCI/pcieaer-howto.txt
index acd0ddd..48ce790 100644
--- a/Documentation/PCI/pcieaer-howto.txt
+++ b/Documentation/PCI/pcieaer-howto.txt
@@ -73,6 +73,11 @@
the error message to root port. Pls. refer to pci express specs for
other fields.
+2.4 AER Statistics / Counters
+
+When PCIe AER errors are captured, the counters / statistics are also exposed
+in the form of sysfs attributes which are documented at
+Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
3. Developer Guide
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index efc7aa7..e372208 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -2994,8 +2994,31 @@
See header of drivers/block/paride/pcd.c.
See also Documentation/blockdev/paride.txt.
- pci=option[,option...] [PCI] various PCI subsystem options:
- earlydump [X86] dump PCI config space before the kernel
+ pci=option[,option...] [PCI] various PCI subsystem options.
+
+ Some options herein operate on a specific device
+ or a set of devices (<pci_dev>). These are
+ specified in one of the following formats:
+
+ [<domain>:]<bus>:<dev>.<func>[/<dev>.<func>]*
+ pci:<vendor>:<device>[:<subvendor>:<subdevice>]
+
+ Note: the first format specifies a PCI
+ bus/device/function address which may change
+ if new hardware is inserted, if motherboard
+ firmware changes, or due to changes caused
+ by other kernel parameters. If the
+ domain is left unspecified, it is
+ taken to be zero. Optionally, a path
+ to a device through multiple device/function
+ addresses can be specified after the base
+ address (this is more robust against
+ renumbering issues). The second format
+ selects devices using IDs from the
+ configuration space which may match multiple
+ devices in the system.
+
+ earlydump dump PCI config space before the kernel
changes anything
off [X86] don't probe for the PCI bus
bios [X86-32] force use of PCI BIOS, don't access
@@ -3123,11 +3146,10 @@
window. The default value is 64 megabytes.
resource_alignment=
Format:
- [<order of align>@][<domain>:]<bus>:<slot>.<func>[; ...]
- [<order of align>@]pci:<vendor>:<device>\
- [:<subvendor>:<subdevice>][; ...]
+ [<order of align>@]<pci_dev>[; ...]
Specifies alignment and device to reassign
- aligned memory resources.
+ aligned memory resources. How to
+ specify the device is described above.
If <order of align> is not specified,
PAGE_SIZE is used as alignment.
PCI-PCI bridge can be specified, if resource
@@ -3170,6 +3192,15 @@
Adding the window is slightly risky (it may
conflict with unreported devices), so this
taints the kernel.
+ disable_acs_redir=<pci_dev>[; ...]
+ Specify one or more PCI devices (in the format
+ specified above) separated by semicolons.
+ Each device specified will have the PCI ACS
+ redirect capabilities forced off which will
+ allow P2P traffic between devices through
+ bridges without forcing it upstream. Note:
+ this removes isolation between devices and
+ may put more devices in an IOMMU group.
pcie_aspm= [PCIE] Forcibly enable or disable PCIe Active State Power
Management.
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.txt b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.txt
index 9a305237..4a0475e 100644
--- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.txt
+++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.txt
@@ -9,6 +9,9 @@
Optional properties:
- max-functions: Maximum number of functions that can be configured (default 1).
+- phys: From PHY bindings: List of Generic PHY phandles. One per lane if more
+ than one in the list. If only one PHY listed it must manage all lanes.
+- phy-names: List of names to identify the PHY.
Example:
@@ -19,4 +22,6 @@
reg-names = "reg", "mem";
cdns,max-outbound-regions = <16>;
max-functions = /bits/ 8 <8>;
+ phys = <&ep_phy0 &ep_phy1>;
+ phy-names = "pcie-lane0","pcie-lane1";
};
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
index 20a33f3..91de69c 100644
--- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
+++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
@@ -24,6 +24,9 @@
translations (default 32)
- vendor-id: The PCI vendor ID (16 bits, default is design dependent)
- device-id: The PCI device ID (16 bits, default is design dependent)
+- phys: From PHY bindings: List of Generic PHY phandles. One per lane if more
+ than one in the list. If only one PHY listed it must manage all lanes.
+- phy-names: List of names to identify the PHY.
Example:
@@ -57,4 +60,7 @@
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
msi-parent = <&its_pci>;
+
+ phys = <&pcie_phy0>;
+ phy-names = "pcie-phy";
};
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index 480c860..c15c4f3 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -166,6 +166,7 @@
'P' all linux/soundcard.h conflict!
'P' 60-6F sound/sscape_ioctl.h conflict!
'P' 00-0F drivers/usb/class/usblp.c conflict!
+'P' 01-09 drivers/misc/pci_endpoint_test.c conflict!
'Q' all linux/soundcard.h
'R' 00-1F linux/random.h conflict!
'R' 01 linux/rfkill.h conflict!
diff --git a/Documentation/misc-devices/pci-endpoint-test.txt b/Documentation/misc-devices/pci-endpoint-test.txt
index 4ebc359..58ccca4 100644
--- a/Documentation/misc-devices/pci-endpoint-test.txt
+++ b/Documentation/misc-devices/pci-endpoint-test.txt
@@ -10,6 +10,7 @@
*) verifying addresses programmed in BAR
*) raise legacy IRQ
*) raise MSI IRQ
+ *) raise MSI-X IRQ
*) read data
*) write data
*) copy data
@@ -25,6 +26,11 @@
PCITEST_LEGACY_IRQ: Tests legacy IRQ
PCITEST_MSI: Tests message signalled interrupts. The MSI number
to be tested should be passed as argument.
+ PCITEST_MSIX: Tests message signalled interrupts. The MSI-X number
+ to be tested should be passed as argument.
+ PCITEST_SET_IRQTYPE: Changes driver IRQ type configuration. The IRQ type
+ should be passed as argument (0: Legacy, 1:MSI, 2:MSI-X).
+ PCITEST_GET_IRQTYPE: Gets driver IRQ type configuration.
PCITEST_WRITE: Perform write tests. The size of the buffer should be passed
as argument.
PCITEST_READ: Perform read tests. The size of the buffer should be passed
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 54eeb8d..843edfd 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1245,8 +1245,14 @@
VESA. If you have PCI, say Y, otherwise N.
config PCI_DOMAINS
- bool
+ bool "Support for multiple PCI domains"
depends on PCI
+ help
+ Enable PCI domains kernel management. Say Y if your machine
+ has a PCI bus hierarchy that requires more than one PCI
+ domain (aka segment) to be correctly managed. Say N otherwise.
+
+ If you don't know what to do here, say N.
config PCI_DOMAINS_GENERIC
def_bool PCI_DOMAINS
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index c46a728..25aac6e 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -20,6 +20,7 @@
select GPIOLIB
select ARM_AMBA
select PINCTRL
+ select PCI_DOMAINS if PCI
help
This enables support for systems based on Broadcom IPROC architected SoCs.
The IPROC complex contains one or more ARM CPUs along with common
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index d0f62ea..4adb901 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -10,6 +10,7 @@
select HAVE_ARM_SCU
select HAVE_ARM_TWD if SMP
select MFD_SYSCON
+ select PCI_DOMAINS if PCI
if ARCH_SOCFPGA
config SOCFPGA_SUSPEND
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 155170d..dbfc705 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -357,9 +357,6 @@
static int __init dma_init(void)
{
-#ifdef CONFIG_PCI
- dma_debug_add_bus(&pci_bus_type);
-#endif
#ifdef CONFIG_IBMVIO
dma_debug_add_bus(&vio_bus_type);
#endif
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index fe9733f..471aac3 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -42,6 +42,8 @@
#include <asm/ppc-pci.h>
#include <asm/eeh.h>
+#include "../../../drivers/pci/pci.h"
+
/* hose_spinlock protects accesses to the the phb_bitmap. */
static DEFINE_SPINLOCK(hose_spinlock);
LIST_HEAD(hose_list);
@@ -1014,7 +1016,7 @@
/* Cardbus can call us to add new devices to a bus, so ignore
* those who are already fully discovered
*/
- if (dev->is_added)
+ if (pci_dev_is_added(dev))
continue;
pcibios_setup_device(dev);
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 5bd0eb6..70b2e1e 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -46,6 +46,7 @@
#include "powernv.h"
#include "pci.h"
+#include "../../../../drivers/pci/pci.h"
#define PNV_IODA1_M64_NUM 16 /* Number of M64 BARs */
#define PNV_IODA1_M64_SEGS 8 /* Segments per M64 BAR */
@@ -3138,7 +3139,7 @@
struct pci_dn *pdn;
int mul, total_vfs;
- if (!pdev->is_physfn || pdev->is_added)
+ if (!pdev->is_physfn || pci_dev_is_added(pdev))
return;
pdn = pci_get_pdn(pdev);
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 139f0af..8a4868a 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -71,6 +71,7 @@
#include <asm/security_features.h>
#include "pseries.h"
+#include "../../../../drivers/pci/pci.h"
int CMO_PrPSP = -1;
int CMO_SecPSP = -1;
@@ -664,7 +665,7 @@
const int *indexes;
struct device_node *dn = pci_device_to_OF_node(pdev);
- if (!pdev->is_physfn || pdev->is_added)
+ if (!pdev->is_physfn || pci_dev_is_added(pdev))
return;
/*Firmware must support open sriov otherwise dont configure*/
indexes = of_get_property(dn, "ibm,open-sriov-vf-bar-info", NULL);
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index e5b7437..8256626 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -160,8 +160,6 @@
for (hose = hose_head; hose; hose = hose->next)
pcibios_scanbus(hose);
- dma_debug_add_bus(&pci_bus_type);
-
pci_initialized = 1;
return 0;
diff --git a/arch/x86/include/asm/pci-direct.h b/arch/x86/include/asm/pci-direct.h
index e1084f7..94597a3 100644
--- a/arch/x86/include/asm/pci-direct.h
+++ b/arch/x86/include/asm/pci-direct.h
@@ -15,8 +15,4 @@
extern void write_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset, u16 val);
extern int early_pci_allowed(void);
-
-extern unsigned int pci_early_dump_regs;
-extern void early_dump_pci_device(u8 bus, u8 slot, u8 func);
-extern void early_dump_pci_devices(void);
#endif /* _ASM_X86_PCI_DIRECT_H */
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index ab5d9dd..43f5863 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -155,9 +155,6 @@
{
struct iommu_table_entry *p;
-#ifdef CONFIG_PCI
- dma_debug_add_bus(&pci_bus_type);
-#endif
x86_init.iommu.iommu_init();
for (p = __iommu_table; p < __iommu_table_end; p++) {
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 2f86d88..480f250 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -991,11 +991,6 @@
setup_clear_cpu_cap(X86_FEATURE_APIC);
}
-#ifdef CONFIG_PCI
- if (pci_early_dump_regs)
- early_dump_pci_devices();
-#endif
-
e820__reserve_setup_data();
e820__finish_early_params();
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 563049c..d4ec117 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -22,7 +22,6 @@
unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
PCI_PROBE_MMCONF;
-unsigned int pci_early_dump_regs;
static int pci_bf_sort;
int pci_routeirq;
int noioapicquirk;
@@ -599,9 +598,6 @@
pci_probe |= PCI_BIG_ROOT_WINDOW;
return NULL;
#endif
- } else if (!strcmp(str, "earlydump")) {
- pci_early_dump_regs = 1;
- return NULL;
} else if (!strcmp(str, "routeirq")) {
pci_routeirq = 1;
return NULL;
diff --git a/arch/x86/pci/early.c b/arch/x86/pci/early.c
index e5f753c..f5fc953 100644
--- a/arch/x86/pci/early.c
+++ b/arch/x86/pci/early.c
@@ -57,47 +57,3 @@
PCI_PROBE_CONF1;
}
-void early_dump_pci_device(u8 bus, u8 slot, u8 func)
-{
- u32 value[256 / 4];
- int i;
-
- pr_info("pci 0000:%02x:%02x.%d config space:\n", bus, slot, func);
-
- for (i = 0; i < 256; i += 4)
- value[i / 4] = read_pci_config(bus, slot, func, i);
-
- print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1, value, 256, false);
-}
-
-void early_dump_pci_devices(void)
-{
- unsigned bus, slot, func;
-
- if (!early_pci_allowed())
- return;
-
- for (bus = 0; bus < 256; bus++) {
- for (slot = 0; slot < 32; slot++) {
- for (func = 0; func < 8; func++) {
- u32 class;
- u8 type;
-
- class = read_pci_config(bus, slot, func,
- PCI_CLASS_REVISION);
- if (class == 0xffffffff)
- continue;
-
- early_dump_pci_device(bus, slot, func);
-
- if (func == 0) {
- type = read_pci_config_byte(bus, slot,
- func,
- PCI_HEADER_TYPE);
- if (!(type & 0x80))
- break;
- }
- }
- }
- }
-}
diff --git a/drivers/infiniband/hw/hfi1/pcie.c b/drivers/infiniband/hw/hfi1/pcie.c
index 4d4371b..baf7c32 100644
--- a/drivers/infiniband/hw/hfi1/pcie.c
+++ b/drivers/infiniband/hw/hfi1/pcie.c
@@ -905,9 +905,7 @@
* delay after a reset is required. Per spec requirements,
* the link is either working or not after that point.
*/
- pci_reset_bridge_secondary_bus(dev->bus->self);
-
- return 0;
+ return pci_reset_bus(dev);
}
/*
diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
index 7b37046..896e2df 100644
--- a/drivers/misc/pci_endpoint_test.c
+++ b/drivers/misc/pci_endpoint_test.c
@@ -35,38 +35,45 @@
#include <uapi/linux/pcitest.h>
-#define DRV_MODULE_NAME "pci-endpoint-test"
+#define DRV_MODULE_NAME "pci-endpoint-test"
-#define PCI_ENDPOINT_TEST_MAGIC 0x0
+#define IRQ_TYPE_UNDEFINED -1
+#define IRQ_TYPE_LEGACY 0
+#define IRQ_TYPE_MSI 1
+#define IRQ_TYPE_MSIX 2
-#define PCI_ENDPOINT_TEST_COMMAND 0x4
-#define COMMAND_RAISE_LEGACY_IRQ BIT(0)
-#define COMMAND_RAISE_MSI_IRQ BIT(1)
-#define MSI_NUMBER_SHIFT 2
-/* 6 bits for MSI number */
-#define COMMAND_READ BIT(8)
-#define COMMAND_WRITE BIT(9)
-#define COMMAND_COPY BIT(10)
+#define PCI_ENDPOINT_TEST_MAGIC 0x0
-#define PCI_ENDPOINT_TEST_STATUS 0x8
-#define STATUS_READ_SUCCESS BIT(0)
-#define STATUS_READ_FAIL BIT(1)
-#define STATUS_WRITE_SUCCESS BIT(2)
-#define STATUS_WRITE_FAIL BIT(3)
-#define STATUS_COPY_SUCCESS BIT(4)
-#define STATUS_COPY_FAIL BIT(5)
-#define STATUS_IRQ_RAISED BIT(6)
-#define STATUS_SRC_ADDR_INVALID BIT(7)
-#define STATUS_DST_ADDR_INVALID BIT(8)
+#define PCI_ENDPOINT_TEST_COMMAND 0x4
+#define COMMAND_RAISE_LEGACY_IRQ BIT(0)
+#define COMMAND_RAISE_MSI_IRQ BIT(1)
+#define COMMAND_RAISE_MSIX_IRQ BIT(2)
+#define COMMAND_READ BIT(3)
+#define COMMAND_WRITE BIT(4)
+#define COMMAND_COPY BIT(5)
-#define PCI_ENDPOINT_TEST_LOWER_SRC_ADDR 0xc
+#define PCI_ENDPOINT_TEST_STATUS 0x8
+#define STATUS_READ_SUCCESS BIT(0)
+#define STATUS_READ_FAIL BIT(1)
+#define STATUS_WRITE_SUCCESS BIT(2)
+#define STATUS_WRITE_FAIL BIT(3)
+#define STATUS_COPY_SUCCESS BIT(4)
+#define STATUS_COPY_FAIL BIT(5)
+#define STATUS_IRQ_RAISED BIT(6)
+#define STATUS_SRC_ADDR_INVALID BIT(7)
+#define STATUS_DST_ADDR_INVALID BIT(8)
+
+#define PCI_ENDPOINT_TEST_LOWER_SRC_ADDR 0x0c
#define PCI_ENDPOINT_TEST_UPPER_SRC_ADDR 0x10
#define PCI_ENDPOINT_TEST_LOWER_DST_ADDR 0x14
#define PCI_ENDPOINT_TEST_UPPER_DST_ADDR 0x18
-#define PCI_ENDPOINT_TEST_SIZE 0x1c
-#define PCI_ENDPOINT_TEST_CHECKSUM 0x20
+#define PCI_ENDPOINT_TEST_SIZE 0x1c
+#define PCI_ENDPOINT_TEST_CHECKSUM 0x20
+
+#define PCI_ENDPOINT_TEST_IRQ_TYPE 0x24
+#define PCI_ENDPOINT_TEST_IRQ_NUMBER 0x28
static DEFINE_IDA(pci_endpoint_test_ida);
@@ -77,6 +84,10 @@
module_param(no_msi, bool, 0444);
MODULE_PARM_DESC(no_msi, "Disable MSI interrupt in pci_endpoint_test");
+static int irq_type = IRQ_TYPE_MSI;
+module_param(irq_type, int, 0444);
+MODULE_PARM_DESC(irq_type, "IRQ mode selection in pci_endpoint_test (0 - Legacy, 1 - MSI, 2 - MSI-X)");
+
enum pci_barno {
BAR_0,
BAR_1,
@@ -103,7 +114,7 @@
struct pci_endpoint_test_data {
enum pci_barno test_reg_bar;
size_t alignment;
- bool no_msi;
+ int irq_type;
};
static inline u32 pci_endpoint_test_readl(struct pci_endpoint_test *test,
@@ -147,6 +158,100 @@
return IRQ_HANDLED;
}
+static void pci_endpoint_test_free_irq_vectors(struct pci_endpoint_test *test)
+{
+ struct pci_dev *pdev = test->pdev;
+
+ pci_free_irq_vectors(pdev);
+}
+
+static bool pci_endpoint_test_alloc_irq_vectors(struct pci_endpoint_test *test,
+ int type)
+{
+ int irq = -1;
+ struct pci_dev *pdev = test->pdev;
+ struct device *dev = &pdev->dev;
+ bool res = true;
+
+ switch (type) {
+ case IRQ_TYPE_LEGACY:
+ irq = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_LEGACY);
+ if (irq < 0)
+ dev_err(dev, "Failed to get Legacy interrupt\n");
+ break;
+ case IRQ_TYPE_MSI:
+ irq = pci_alloc_irq_vectors(pdev, 1, 32, PCI_IRQ_MSI);
+ if (irq < 0)
+ dev_err(dev, "Failed to get MSI interrupts\n");
+ break;
+ case IRQ_TYPE_MSIX:
+ irq = pci_alloc_irq_vectors(pdev, 1, 2048, PCI_IRQ_MSIX);
+ if (irq < 0)
+ dev_err(dev, "Failed to get MSI-X interrupts\n");
+ break;
+ default:
+ dev_err(dev, "Invalid IRQ type selected\n");
+ }
+
+ if (irq < 0) {
+ irq = 0;
+ res = false;
+ }
+ test->num_irqs = irq;
+
+ return res;
+}
+
+static void pci_endpoint_test_release_irq(struct pci_endpoint_test *test)
+{
+ int i;
+ struct pci_dev *pdev = test->pdev;
+ struct device *dev = &pdev->dev;
+
+ for (i = 0; i < test->num_irqs; i++)
+ devm_free_irq(dev, pci_irq_vector(pdev, i), test);
+
+ test->num_irqs = 0;
+}
+
+static bool pci_endpoint_test_request_irq(struct pci_endpoint_test *test)
+{
+ int i;
+ int err;
+ struct pci_dev *pdev = test->pdev;
+ struct device *dev = &pdev->dev;
+
+ for (i = 0; i < test->num_irqs; i++) {
+ err = devm_request_irq(dev, pci_irq_vector(pdev, i),
+ pci_endpoint_test_irqhandler,
+ IRQF_SHARED, DRV_MODULE_NAME, test);
+ if (err)
+ goto fail;
+ }
+
+ return true;
+
+fail:
+ switch (irq_type) {
+ case IRQ_TYPE_LEGACY:
+ dev_err(dev, "Failed to request IRQ %d for Legacy\n",
+ pci_irq_vector(pdev, i));
+ break;
+ case IRQ_TYPE_MSI:
+ dev_err(dev, "Failed to request IRQ %d for MSI %d\n",
+ pci_irq_vector(pdev, i),
+ i + 1);
+ break;
+ case IRQ_TYPE_MSIX:
+ dev_err(dev, "Failed to request IRQ %d for MSI-X %d\n",
+ pci_irq_vector(pdev, i),
+ i + 1);
+ break;
+ }
+
+ return false;
+}
+
static bool pci_endpoint_test_bar(struct pci_endpoint_test *test,
enum pci_barno barno)
{
@@ -179,6 +284,9 @@
{
u32 val;
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE,
+ IRQ_TYPE_LEGACY);
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 0);
pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
COMMAND_RAISE_LEGACY_IRQ);
val = wait_for_completion_timeout(&test->irq_raised,
@@ -190,14 +298,18 @@
}
static bool pci_endpoint_test_msi_irq(struct pci_endpoint_test *test,
- u8 msi_num)
+ u16 msi_num, bool msix)
{
u32 val;
struct pci_dev *pdev = test->pdev;
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE,
+ msix == false ? IRQ_TYPE_MSI :
+ IRQ_TYPE_MSIX);
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, msi_num);
pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
- msi_num << MSI_NUMBER_SHIFT |
- COMMAND_RAISE_MSI_IRQ);
+ msix == false ? COMMAND_RAISE_MSI_IRQ :
+ COMMAND_RAISE_MSIX_IRQ);
val = wait_for_completion_timeout(&test->irq_raised,
msecs_to_jiffies(1000));
if (!val)
@@ -230,6 +342,11 @@
if (size > SIZE_MAX - alignment)
goto err;
+ if (irq_type < IRQ_TYPE_LEGACY || irq_type > IRQ_TYPE_MSIX) {
+ dev_err(dev, "Invalid IRQ type option\n");
+ goto err;
+ }
+
orig_src_addr = dma_alloc_coherent(dev, size + alignment,
&orig_src_phys_addr, GFP_KERNEL);
if (!orig_src_addr) {
@@ -281,8 +398,10 @@
pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE,
size);
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type);
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1);
pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
- 1 << MSI_NUMBER_SHIFT | COMMAND_COPY);
+ COMMAND_COPY);
wait_for_completion(&test->irq_raised);
@@ -318,6 +437,11 @@
if (size > SIZE_MAX - alignment)
goto err;
+ if (irq_type < IRQ_TYPE_LEGACY || irq_type > IRQ_TYPE_MSIX) {
+ dev_err(dev, "Invalid IRQ type option\n");
+ goto err;
+ }
+
orig_addr = dma_alloc_coherent(dev, size + alignment, &orig_phys_addr,
GFP_KERNEL);
if (!orig_addr) {
@@ -348,8 +472,10 @@
pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE, size);
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type);
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1);
pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
- 1 << MSI_NUMBER_SHIFT | COMMAND_READ);
+ COMMAND_READ);
wait_for_completion(&test->irq_raised);
@@ -379,6 +505,11 @@
if (size > SIZE_MAX - alignment)
goto err;
+ if (irq_type < IRQ_TYPE_LEGACY || irq_type > IRQ_TYPE_MSIX) {
+ dev_err(dev, "Invalid IRQ type option\n");
+ goto err;
+ }
+
orig_addr = dma_alloc_coherent(dev, size + alignment, &orig_phys_addr,
GFP_KERNEL);
if (!orig_addr) {
@@ -403,8 +534,10 @@
pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE, size);
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type);
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1);
pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
- 1 << MSI_NUMBER_SHIFT | COMMAND_WRITE);
+ COMMAND_WRITE);
wait_for_completion(&test->irq_raised);
@@ -417,6 +550,38 @@
return ret;
}
+static bool pci_endpoint_test_set_irq(struct pci_endpoint_test *test,
+ int req_irq_type)
+{
+ struct pci_dev *pdev = test->pdev;
+ struct device *dev = &pdev->dev;
+
+ if (req_irq_type < IRQ_TYPE_LEGACY || req_irq_type > IRQ_TYPE_MSIX) {
+ dev_err(dev, "Invalid IRQ type option\n");
+ return false;
+ }
+
+ if (irq_type == req_irq_type)
+ return true;
+
+ pci_endpoint_test_release_irq(test);
+ pci_endpoint_test_free_irq_vectors(test);
+
+ if (!pci_endpoint_test_alloc_irq_vectors(test, req_irq_type))
+ goto err;
+
+ if (!pci_endpoint_test_request_irq(test))
+ goto err;
+
+ irq_type = req_irq_type;
+ return true;
+
+err:
+ pci_endpoint_test_free_irq_vectors(test);
+ irq_type = IRQ_TYPE_UNDEFINED;
+ return false;
+}
+
static long pci_endpoint_test_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
@@ -436,7 +601,8 @@
ret = pci_endpoint_test_legacy_irq(test);
break;
case PCITEST_MSI:
- ret = pci_endpoint_test_msi_irq(test, arg);
+ case PCITEST_MSIX:
+ ret = pci_endpoint_test_msi_irq(test, arg, cmd == PCITEST_MSIX);
break;
case PCITEST_WRITE:
ret = pci_endpoint_test_write(test, arg);
@@ -447,6 +613,12 @@
case PCITEST_COPY:
ret = pci_endpoint_test_copy(test, arg);
break;
+ case PCITEST_SET_IRQTYPE:
+ ret = pci_endpoint_test_set_irq(test, arg);
+ break;
+ case PCITEST_GET_IRQTYPE:
+ ret = irq_type;
+ break;
}
ret:
@@ -462,9 +634,7 @@
static int pci_endpoint_test_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
- int i;
int err;
- int irq = 0;
int id;
char name[20];
enum pci_barno bar;
@@ -486,11 +656,14 @@
test->alignment = 0;
test->pdev = pdev;
+ if (no_msi)
+ irq_type = IRQ_TYPE_LEGACY;
+
data = (struct pci_endpoint_test_data *)ent->driver_data;
if (data) {
test_reg_bar = data->test_reg_bar;
test->alignment = data->alignment;
- no_msi = data->no_msi;
+ irq_type = data->irq_type;
}
init_completion(&test->irq_raised);
@@ -510,28 +683,11 @@
pci_set_master(pdev);
- if (!no_msi) {
- irq = pci_alloc_irq_vectors(pdev, 1, 32, PCI_IRQ_MSI);
- if (irq < 0)
- dev_err(dev, "Failed to get MSI interrupts\n");
- test->num_irqs = irq;
- }
+ if (!pci_endpoint_test_alloc_irq_vectors(test, irq_type))
+ goto err_disable_irq;
- err = devm_request_irq(dev, pdev->irq, pci_endpoint_test_irqhandler,
- IRQF_SHARED, DRV_MODULE_NAME, test);
- if (err) {
- dev_err(dev, "Failed to request IRQ %d\n", pdev->irq);
- goto err_disable_msi;
- }
-
- for (i = 1; i < irq; i++) {
- err = devm_request_irq(dev, pci_irq_vector(pdev, i),
- pci_endpoint_test_irqhandler,
- IRQF_SHARED, DRV_MODULE_NAME, test);
- if (err)
- dev_err(dev, "failed to request IRQ %d for MSI %d\n",
- pci_irq_vector(pdev, i), i + 1);
- }
+ if (!pci_endpoint_test_request_irq(test))
+ goto err_disable_irq;
for (bar = BAR_0; bar <= BAR_5; bar++) {
if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) {
@@ -590,12 +746,10 @@
if (test->bar[bar])
pci_iounmap(pdev, test->bar[bar]);
}
+ pci_endpoint_test_release_irq(test);
- for (i = 0; i < irq; i++)
- devm_free_irq(&pdev->dev, pci_irq_vector(pdev, i), test);
-
-err_disable_msi:
- pci_disable_msi(pdev);
+err_disable_irq:
+ pci_endpoint_test_free_irq_vectors(test);
pci_release_regions(pdev);
err_disable_pdev:
@@ -607,7 +761,6 @@
static void pci_endpoint_test_remove(struct pci_dev *pdev)
{
int id;
- int i;
enum pci_barno bar;
struct pci_endpoint_test *test = pci_get_drvdata(pdev);
struct miscdevice *misc_device = &test->miscdev;
@@ -624,9 +777,10 @@
if (test->bar[bar])
pci_iounmap(pdev, test->bar[bar]);
}
- for (i = 0; i < test->num_irqs; i++)
- devm_free_irq(&pdev->dev, pci_irq_vector(pdev, i), test);
- pci_disable_msi(pdev);
+
+ pci_endpoint_test_release_irq(test);
+ pci_endpoint_test_free_irq_vectors(test);
+
pci_release_regions(pdev);
pci_disable_device(pdev);
}
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index f707709..c77fda0 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -22,7 +22,6 @@
#include <linux/if.h>
#include <linux/if_vlan.h>
#include <linux/pci.h>
-#include <linux/pci-aspm.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/ip.h>
diff --git a/drivers/net/ethernet/netronome/nfp/nfp_main.c b/drivers/net/ethernet/netronome/nfp/nfp_main.c
index 46b76d5..152283d 100644
--- a/drivers/net/ethernet/netronome/nfp/nfp_main.c
+++ b/drivers/net/ethernet/netronome/nfp/nfp_main.c
@@ -240,7 +240,6 @@
return pci_sriov_set_totalvfs(pf->pdev, pf->limit_vfs);
pf->limit_vfs = ~0;
- pci_sriov_set_totalvfs(pf->pdev, 0); /* 0 is unset */
/* Allow any setting for backwards compatibility if symbol not found */
if (err == -ENOENT)
return 0;
@@ -668,7 +667,7 @@
err = nfp_net_pci_probe(pf);
if (err)
- goto err_sriov_unlimit;
+ goto err_fw_unload;
err = nfp_hwmon_register(pf);
if (err) {
@@ -680,8 +679,6 @@
err_net_remove:
nfp_net_pci_remove(pf);
-err_sriov_unlimit:
- pci_sriov_set_totalvfs(pf->pdev, 0);
err_fw_unload:
kfree(pf->rtbl);
nfp_mip_close(pf->mip);
@@ -715,7 +712,6 @@
nfp_hwmon_unregister(pf);
nfp_pcie_sriov_disable(pdev);
- pci_sriov_set_totalvfs(pf->pdev, 0);
nfp_net_pci_remove(pf);
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index 645f0fb..92b2dd3 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -18,7 +18,6 @@
#include <linux/nl80211.h>
#include <linux/pci.h>
-#include <linux/pci-aspm.h>
#include <linux/module.h>
#include "ath9k.h"
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
index 38234bd..d6c55e1 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
@@ -72,7 +72,6 @@
#include <linux/module.h>
#include <linux/pm_runtime.h>
#include <linux/pci.h>
-#include <linux/pci-aspm.h>
#include <linux/acpi.h>
#include "fw/acpi.h"
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00pci.h b/drivers/net/wireless/ralink/rt2x00/rt2x00pci.h
index bc0ca5f..283e2e6 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00pci.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00pci.h
@@ -28,12 +28,6 @@
#include <linux/pci.h>
/*
- * This variable should be used with the
- * pci_driver structure initialization.
- */
-#define PCI_DEVICE_DATA(__ops) .driver_data = (kernel_ulong_t)(__ops)
-
-/*
* PCI driver handlers.
*/
int rt2x00pci_probe(struct pci_dev *pci_dev, const struct rt2x00_ops *ops);
diff --git a/drivers/ntb/hw/mscc/ntb_hw_switchtec.c b/drivers/ntb/hw/mscc/ntb_hw_switchtec.c
index f624ae2..5ee5f40 100644
--- a/drivers/ntb/hw/mscc/ntb_hw_switchtec.c
+++ b/drivers/ntb/hw/mscc/ntb_hw_switchtec.c
@@ -19,6 +19,7 @@
#include <linux/kthread.h>
#include <linux/interrupt.h>
#include <linux/ntb.h>
+#include <linux/pci.h>
MODULE_DESCRIPTION("Microsemi Switchtec(tm) NTB Driver");
MODULE_VERSION("0.1");
@@ -1487,7 +1488,7 @@
stdev->sndev = NULL;
- if (stdev->pdev->class != MICROSEMI_NTB_CLASSCODE)
+ if (stdev->pdev->class != (PCI_CLASS_BRIDGE_OTHER << 8))
return -ENODEV;
sndev = kzalloc_node(sizeof(*sndev), GFP_KERNEL, dev_to_node(dev));
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 5352019..1b2cfe5 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -28,10 +28,10 @@
obj-$(CONFIG_PCI_ECAM) += ecam.o
obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o
-obj-y += controller/
-obj-y += switch/
-
# Endpoint library must be initialized before its users
obj-$(CONFIG_PCI_ENDPOINT) += endpoint/
+obj-y += controller/
+obj-y += switch/
+
ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG
diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c
index 4923a2a..5b78f3b 100644
--- a/drivers/pci/ats.c
+++ b/drivers/pci/ats.c
@@ -273,6 +273,9 @@
if (WARN_ON(pdev->pasid_enabled))
return -EBUSY;
+ if (!pdev->eetlp_prefix_path)
+ return -EINVAL;
+
pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
if (!pos)
return -EINVAL;
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 35b7fc8..5cb40b2 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -330,7 +330,7 @@
return;
}
- dev->is_added = 1;
+ pci_dev_assign_added(dev, true);
}
EXPORT_SYMBOL_GPL(pci_bus_add_device);
@@ -347,14 +347,14 @@
list_for_each_entry(dev, &bus->devices, bus_list) {
/* Skip already-added devices */
- if (dev->is_added)
+ if (pci_dev_is_added(dev))
continue;
pci_bus_add_device(dev);
}
list_for_each_entry(dev, &bus->devices, bus_list) {
/* Skip if device attach failed */
- if (!dev->is_added)
+ if (!pci_dev_is_added(dev))
continue;
child = dev->subordinate;
if (child)
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 18fa09b..0f7ce5e 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -96,14 +96,13 @@
depends on OF
select PCI_HOST_COMMON
select IRQ_DOMAIN
- select PCI_DOMAINS
help
Say Y here if you want to support a simple generic PCI host
controller, such as the one emulated by kvmtool.
config PCIE_XILINX
bool "Xilinx AXI PCIe host bridge support"
- depends on ARCH_ZYNQ || MICROBLAZE || (MIPS && PCI_DRIVERS_GENERIC) || COMPILE_TEST
+ depends on OF || COMPILE_TEST
help
Say 'Y' here if you want kernel to support the Xilinx AXI PCIe
Host Bridge driver.
@@ -138,7 +137,6 @@
config PCIE_IPROC
tristate
- select PCI_DOMAINS
help
This enables the iProc PCIe core controller support for Broadcom's
iProc family of SoCs. An appropriate bus interface driver needs
@@ -176,7 +174,6 @@
config PCIE_ALTERA
bool "Altera PCIe controller"
depends on ARM || NIOS2 || COMPILE_TEST
- select PCI_DOMAINS
help
Say Y here if you want to enable PCIe controller support on Altera
FPGA.
diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index 16f52c6..91b0194 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -58,7 +58,6 @@
depends on PCI && PCI_MSI_IRQ_DOMAIN
select PCIE_DW_HOST
select PCIE_DW_PLAT
- default y
help
Enables support for the PCIe controller in the Designware IP to
work in host mode. There are two instances of PCIe controller in
diff --git a/drivers/pci/controller/dwc/pci-dra7xx.c b/drivers/pci/controller/dwc/pci-dra7xx.c
index 345aab5..ce9224a 100644
--- a/drivers/pci/controller/dwc/pci-dra7xx.c
+++ b/drivers/pci/controller/dwc/pci-dra7xx.c
@@ -370,7 +370,7 @@
}
static int dra7xx_pcie_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
- enum pci_epc_irq_type type, u8 interrupt_num)
+ enum pci_epc_irq_type type, u16 interrupt_num)
{
struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
diff --git a/drivers/pci/controller/dwc/pci-exynos.c b/drivers/pci/controller/dwc/pci-exynos.c
index 4cc1e5d..cee5f2f 100644
--- a/drivers/pci/controller/dwc/pci-exynos.c
+++ b/drivers/pci/controller/dwc/pci-exynos.c
@@ -421,7 +421,6 @@
}
}
- pp->root_bus_nr = -1;
pp->ops = &exynos_pcie_host_ops;
ret = dw_pcie_host_init(pp);
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 80f6046..4a9a673 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -667,7 +667,6 @@
}
}
- pp->root_bus_nr = -1;
pp->ops = &imx6_pcie_host_ops;
ret = dw_pcie_host_init(pp);
diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 3722a5f..e88bd22 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -347,7 +347,6 @@
}
}
- pp->root_bus_nr = -1;
pp->ops = &keystone_pcie_host_ops;
ret = ks_dw_pcie_host_init(ks_pcie, ks_pcie->msi_intc_np);
if (ret) {
diff --git a/drivers/pci/controller/dwc/pcie-armada8k.c b/drivers/pci/controller/dwc/pcie-armada8k.c
index 072fd7e..0c389a30 100644
--- a/drivers/pci/controller/dwc/pcie-armada8k.c
+++ b/drivers/pci/controller/dwc/pcie-armada8k.c
@@ -172,7 +172,6 @@
struct device *dev = &pdev->dev;
int ret;
- pp->root_bus_nr = -1;
pp->ops = &armada8k_pcie_host_ops;
pp->irq = platform_get_irq(pdev, 0);
diff --git a/drivers/pci/controller/dwc/pcie-artpec6.c b/drivers/pci/controller/dwc/pcie-artpec6.c
index 321b56c..dba83ab 100644
--- a/drivers/pci/controller/dwc/pcie-artpec6.c
+++ b/drivers/pci/controller/dwc/pcie-artpec6.c
@@ -399,7 +399,6 @@
}
}
- pp->root_bus_nr = -1;
pp->ops = &artpec6_pcie_host_ops;
ret = dw_pcie_host_init(pp);
@@ -428,7 +427,7 @@
}
static int artpec6_pcie_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
- enum pci_epc_irq_type type, u8 interrupt_num)
+ enum pci_epc_irq_type type, u16 interrupt_num)
{
struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index 8650416..1e7b022 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -40,6 +40,39 @@
__dw_pcie_ep_reset_bar(pci, bar, 0);
}
+static u8 __dw_pcie_ep_find_next_cap(struct dw_pcie *pci, u8 cap_ptr,
+ u8 cap)
+{
+ u8 cap_id, next_cap_ptr;
+ u16 reg;
+
+ reg = dw_pcie_readw_dbi(pci, cap_ptr);
+ next_cap_ptr = (reg & 0xff00) >> 8;
+ cap_id = (reg & 0x00ff);
+
+ if (!next_cap_ptr || cap_id > PCI_CAP_ID_MAX)
+ return 0;
+
+ if (cap_id == cap)
+ return cap_ptr;
+
+ return __dw_pcie_ep_find_next_cap(pci, next_cap_ptr, cap);
+}
+
+static u8 dw_pcie_ep_find_capability(struct dw_pcie *pci, u8 cap)
+{
+ u8 next_cap_ptr;
+ u16 reg;
+
+ reg = dw_pcie_readw_dbi(pci, PCI_CAPABILITY_LIST);
+ next_cap_ptr = (reg & 0x00ff);
+
+ if (!next_cap_ptr)
+ return 0;
+
+ return __dw_pcie_ep_find_next_cap(pci, next_cap_ptr, cap);
+}
+
static int dw_pcie_ep_write_header(struct pci_epc *epc, u8 func_no,
struct pci_epf_header *hdr)
{
@@ -213,36 +246,84 @@
static int dw_pcie_ep_get_msi(struct pci_epc *epc, u8 func_no)
{
- int val;
struct dw_pcie_ep *ep = epc_get_drvdata(epc);
struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+ u32 val, reg;
- val = dw_pcie_readw_dbi(pci, MSI_MESSAGE_CONTROL);
- if (!(val & MSI_CAP_MSI_EN_MASK))
+ if (!ep->msi_cap)
return -EINVAL;
- val = (val & MSI_CAP_MME_MASK) >> MSI_CAP_MME_SHIFT;
+ reg = ep->msi_cap + PCI_MSI_FLAGS;
+ val = dw_pcie_readw_dbi(pci, reg);
+ if (!(val & PCI_MSI_FLAGS_ENABLE))
+ return -EINVAL;
+
+ val = (val & PCI_MSI_FLAGS_QSIZE) >> 4;
+
return val;
}
-static int dw_pcie_ep_set_msi(struct pci_epc *epc, u8 func_no, u8 encode_int)
+static int dw_pcie_ep_set_msi(struct pci_epc *epc, u8 func_no, u8 interrupts)
{
- int val;
struct dw_pcie_ep *ep = epc_get_drvdata(epc);
struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+ u32 val, reg;
- val = dw_pcie_readw_dbi(pci, MSI_MESSAGE_CONTROL);
- val &= ~MSI_CAP_MMC_MASK;
- val |= (encode_int << MSI_CAP_MMC_SHIFT) & MSI_CAP_MMC_MASK;
+ if (!ep->msi_cap)
+ return -EINVAL;
+
+ reg = ep->msi_cap + PCI_MSI_FLAGS;
+ val = dw_pcie_readw_dbi(pci, reg);
+ val &= ~PCI_MSI_FLAGS_QMASK;
+ val |= (interrupts << 1) & PCI_MSI_FLAGS_QMASK;
dw_pcie_dbi_ro_wr_en(pci);
- dw_pcie_writew_dbi(pci, MSI_MESSAGE_CONTROL, val);
+ dw_pcie_writew_dbi(pci, reg, val);
+ dw_pcie_dbi_ro_wr_dis(pci);
+
+ return 0;
+}
+
+static int dw_pcie_ep_get_msix(struct pci_epc *epc, u8 func_no)
+{
+ struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+ u32 val, reg;
+
+ if (!ep->msix_cap)
+ return -EINVAL;
+
+ reg = ep->msix_cap + PCI_MSIX_FLAGS;
+ val = dw_pcie_readw_dbi(pci, reg);
+ if (!(val & PCI_MSIX_FLAGS_ENABLE))
+ return -EINVAL;
+
+ val &= PCI_MSIX_FLAGS_QSIZE;
+
+ return val;
+}
+
+static int dw_pcie_ep_set_msix(struct pci_epc *epc, u8 func_no, u16 interrupts)
+{
+ struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+ u32 val, reg;
+
+ if (!ep->msix_cap)
+ return -EINVAL;
+
+ reg = ep->msix_cap + PCI_MSIX_FLAGS;
+ val = dw_pcie_readw_dbi(pci, reg);
+ val &= ~PCI_MSIX_FLAGS_QSIZE;
+ val |= interrupts;
+ dw_pcie_dbi_ro_wr_en(pci);
+ dw_pcie_writew_dbi(pci, reg, val);
dw_pcie_dbi_ro_wr_dis(pci);
return 0;
}
static int dw_pcie_ep_raise_irq(struct pci_epc *epc, u8 func_no,
- enum pci_epc_irq_type type, u8 interrupt_num)
+ enum pci_epc_irq_type type, u16 interrupt_num)
{
struct dw_pcie_ep *ep = epc_get_drvdata(epc);
@@ -282,32 +363,52 @@
.unmap_addr = dw_pcie_ep_unmap_addr,
.set_msi = dw_pcie_ep_set_msi,
.get_msi = dw_pcie_ep_get_msi,
+ .set_msix = dw_pcie_ep_set_msix,
+ .get_msix = dw_pcie_ep_get_msix,
.raise_irq = dw_pcie_ep_raise_irq,
.start = dw_pcie_ep_start,
.stop = dw_pcie_ep_stop,
};
+int dw_pcie_ep_raise_legacy_irq(struct dw_pcie_ep *ep, u8 func_no)
+{
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+ struct device *dev = pci->dev;
+
+ dev_err(dev, "EP cannot trigger legacy IRQs\n");
+
+ return -EINVAL;
+}
+
int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep, u8 func_no,
u8 interrupt_num)
{
struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
struct pci_epc *epc = ep->epc;
u16 msg_ctrl, msg_data;
- u32 msg_addr_lower, msg_addr_upper;
+ u32 msg_addr_lower, msg_addr_upper, reg;
u64 msg_addr;
bool has_upper;
int ret;
+ if (!ep->msi_cap)
+ return -EINVAL;
+
/* Raise MSI per the PCI Local Bus Specification Revision 3.0, 6.8.1. */
- msg_ctrl = dw_pcie_readw_dbi(pci, MSI_MESSAGE_CONTROL);
+ reg = ep->msi_cap + PCI_MSI_FLAGS;
+ msg_ctrl = dw_pcie_readw_dbi(pci, reg);
has_upper = !!(msg_ctrl & PCI_MSI_FLAGS_64BIT);
- msg_addr_lower = dw_pcie_readl_dbi(pci, MSI_MESSAGE_ADDR_L32);
+ reg = ep->msi_cap + PCI_MSI_ADDRESS_LO;
+ msg_addr_lower = dw_pcie_readl_dbi(pci, reg);
if (has_upper) {
- msg_addr_upper = dw_pcie_readl_dbi(pci, MSI_MESSAGE_ADDR_U32);
- msg_data = dw_pcie_readw_dbi(pci, MSI_MESSAGE_DATA_64);
+ reg = ep->msi_cap + PCI_MSI_ADDRESS_HI;
+ msg_addr_upper = dw_pcie_readl_dbi(pci, reg);
+ reg = ep->msi_cap + PCI_MSI_DATA_64;
+ msg_data = dw_pcie_readw_dbi(pci, reg);
} else {
msg_addr_upper = 0;
- msg_data = dw_pcie_readw_dbi(pci, MSI_MESSAGE_DATA_32);
+ reg = ep->msi_cap + PCI_MSI_DATA_32;
+ msg_data = dw_pcie_readw_dbi(pci, reg);
}
msg_addr = ((u64) msg_addr_upper) << 32 | msg_addr_lower;
ret = dw_pcie_ep_map_addr(epc, func_no, ep->msi_mem_phys, msg_addr,
@@ -322,6 +423,64 @@
return 0;
}
+int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
+ u16 interrupt_num)
+{
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+ struct pci_epc *epc = ep->epc;
+ u16 tbl_offset, bir;
+ u32 bar_addr_upper, bar_addr_lower;
+ u32 msg_addr_upper, msg_addr_lower;
+ u32 reg, msg_data, vec_ctrl;
+ u64 tbl_addr, msg_addr, reg_u64;
+ void __iomem *msix_tbl;
+ int ret;
+
+ reg = ep->msix_cap + PCI_MSIX_TABLE;
+ tbl_offset = dw_pcie_readl_dbi(pci, reg);
+ bir = (tbl_offset & PCI_MSIX_TABLE_BIR);
+ tbl_offset &= PCI_MSIX_TABLE_OFFSET;
+ tbl_offset >>= 3;
+
+ reg = PCI_BASE_ADDRESS_0 + (4 * bir);
+ bar_addr_upper = 0;
+ bar_addr_lower = dw_pcie_readl_dbi(pci, reg);
+ reg_u64 = (bar_addr_lower & PCI_BASE_ADDRESS_MEM_TYPE_MASK);
+ if (reg_u64 == PCI_BASE_ADDRESS_MEM_TYPE_64)
+ bar_addr_upper = dw_pcie_readl_dbi(pci, reg + 4);
+
+ tbl_addr = ((u64) bar_addr_upper) << 32 | bar_addr_lower;
+ tbl_addr += (tbl_offset + ((interrupt_num - 1) * PCI_MSIX_ENTRY_SIZE));
+ tbl_addr &= PCI_BASE_ADDRESS_MEM_MASK;
+
+ msix_tbl = ioremap_nocache(ep->phys_base + tbl_addr,
+ PCI_MSIX_ENTRY_SIZE);
+ if (!msix_tbl)
+ return -EINVAL;
+
+ msg_addr_lower = readl(msix_tbl + PCI_MSIX_ENTRY_LOWER_ADDR);
+ msg_addr_upper = readl(msix_tbl + PCI_MSIX_ENTRY_UPPER_ADDR);
+ msg_addr = ((u64) msg_addr_upper) << 32 | msg_addr_lower;
+ msg_data = readl(msix_tbl + PCI_MSIX_ENTRY_DATA);
+ vec_ctrl = readl(msix_tbl + PCI_MSIX_ENTRY_VECTOR_CTRL);
+
+ iounmap(msix_tbl);
+
+ if (vec_ctrl & PCI_MSIX_ENTRY_CTRL_MASKBIT)
+ return -EPERM;
+
+ ret = dw_pcie_ep_map_addr(epc, func_no, ep->msi_mem_phys, msg_addr,
+ epc->mem->page_size);
+ if (ret)
+ return ret;
+
+ writel(msg_data, ep->msi_mem);
+
+ dw_pcie_ep_unmap_addr(epc, func_no, ep->msi_mem_phys);
+
+ return 0;
+}
+
void dw_pcie_ep_exit(struct dw_pcie_ep *ep)
{
struct pci_epc *epc = ep->epc;
@@ -386,15 +545,18 @@
return -ENOMEM;
ep->outbound_addr = addr;
- if (ep->ops->ep_init)
- ep->ops->ep_init(ep);
-
epc = devm_pci_epc_create(dev, &epc_ops);
if (IS_ERR(epc)) {
dev_err(dev, "Failed to create epc device\n");
return PTR_ERR(epc);
}
+ ep->epc = epc;
+ epc_set_drvdata(epc, ep);
+
+ if (ep->ops->ep_init)
+ ep->ops->ep_init(ep);
+
ret = of_property_read_u8(np, "max-functions", &epc->max_functions);
if (ret < 0)
epc->max_functions = 1;
@@ -409,15 +571,13 @@
ep->msi_mem = pci_epc_mem_alloc_addr(epc, &ep->msi_mem_phys,
epc->mem->page_size);
if (!ep->msi_mem) {
- dev_err(dev, "Failed to reserve memory for MSI\n");
+ dev_err(dev, "Failed to reserve memory for MSI/MSI-X\n");
return -ENOMEM;
}
+ ep->msi_cap = dw_pcie_ep_find_capability(pci, PCI_CAP_ID_MSI);
- epc->features = EPC_FEATURE_NO_LINKUP_NOTIFIER;
- EPC_FEATURE_SET_BAR(epc->features, BAR_0);
+ ep->msix_cap = dw_pcie_ep_find_capability(pci, PCI_CAP_ID_MSIX);
- ep->epc = epc;
- epc_set_drvdata(epc, ep);
dw_pcie_setup(pci);
return 0;
diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 781aa03..29a0575 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -363,7 +363,8 @@
resource_list_for_each_entry_safe(win, tmp, &bridge->windows) {
switch (resource_type(win->res)) {
case IORESOURCE_IO:
- ret = pci_remap_iospace(win->res, pp->io_base);
+ ret = devm_pci_remap_iospace(dev, win->res,
+ pp->io_base);
if (ret) {
dev_warn(dev, "Error %d: failed to map resource %pR\n",
ret, win->res);
diff --git a/drivers/pci/controller/dwc/pcie-designware-plat.c b/drivers/pci/controller/dwc/pcie-designware-plat.c
index 5937fed..c12bf79 100644
--- a/drivers/pci/controller/dwc/pcie-designware-plat.c
+++ b/drivers/pci/controller/dwc/pcie-designware-plat.c
@@ -70,24 +70,29 @@
static void dw_plat_pcie_ep_init(struct dw_pcie_ep *ep)
{
struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+ struct pci_epc *epc = ep->epc;
enum pci_barno bar;
for (bar = BAR_0; bar <= BAR_5; bar++)
dw_pcie_ep_reset_bar(pci, bar);
+
+ epc->features |= EPC_FEATURE_NO_LINKUP_NOTIFIER;
+ epc->features |= EPC_FEATURE_MSIX_AVAILABLE;
}
static int dw_plat_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
enum pci_epc_irq_type type,
- u8 interrupt_num)
+ u16 interrupt_num)
{
struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
switch (type) {
case PCI_EPC_IRQ_LEGACY:
- dev_err(pci->dev, "EP cannot trigger legacy IRQs\n");
- return -EINVAL;
+ return dw_pcie_ep_raise_legacy_irq(ep, func_no);
case PCI_EPC_IRQ_MSI:
return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num);
+ case PCI_EPC_IRQ_MSIX:
+ return dw_pcie_ep_raise_msix_irq(ep, func_no, interrupt_num);
default:
dev_err(pci->dev, "UNKNOWN IRQ type\n");
}
@@ -118,7 +123,6 @@
return pp->msi_irq;
}
- pp->root_bus_nr = -1;
pp->ops = &dw_plat_pcie_host_ops;
ret = dw_pcie_host_init(pp);
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index bee4e25..96126fd 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -96,17 +96,6 @@
#define PCIE_GET_ATU_INB_UNR_REG_OFFSET(region) \
((0x3 << 20) | ((region) << 9) | (0x1 << 8))
-#define MSI_MESSAGE_CONTROL 0x52
-#define MSI_CAP_MMC_SHIFT 1
-#define MSI_CAP_MMC_MASK (7 << MSI_CAP_MMC_SHIFT)
-#define MSI_CAP_MME_SHIFT 4
-#define MSI_CAP_MSI_EN_MASK 0x1
-#define MSI_CAP_MME_MASK (7 << MSI_CAP_MME_SHIFT)
-#define MSI_MESSAGE_ADDR_L32 0x54
-#define MSI_MESSAGE_ADDR_U32 0x58
-#define MSI_MESSAGE_DATA_32 0x58
-#define MSI_MESSAGE_DATA_64 0x5C
-
#define MAX_MSI_IRQS 256
#define MAX_MSI_IRQS_PER_CTRL 32
#define MAX_MSI_CTRLS (MAX_MSI_IRQS / MAX_MSI_IRQS_PER_CTRL)
@@ -191,7 +180,7 @@
struct dw_pcie_ep_ops {
void (*ep_init)(struct dw_pcie_ep *ep);
int (*raise_irq)(struct dw_pcie_ep *ep, u8 func_no,
- enum pci_epc_irq_type type, u8 interrupt_num);
+ enum pci_epc_irq_type type, u16 interrupt_num);
};
struct dw_pcie_ep {
@@ -208,6 +197,8 @@
u32 num_ob_windows;
void __iomem *msi_mem;
phys_addr_t msi_mem_phys;
+ u8 msi_cap; /* MSI capability offset */
+ u8 msix_cap; /* MSI-X capability offset */
};
struct dw_pcie_ops {
@@ -357,8 +348,11 @@
void dw_pcie_ep_linkup(struct dw_pcie_ep *ep);
int dw_pcie_ep_init(struct dw_pcie_ep *ep);
void dw_pcie_ep_exit(struct dw_pcie_ep *ep);
+int dw_pcie_ep_raise_legacy_irq(struct dw_pcie_ep *ep, u8 func_no);
int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep, u8 func_no,
u8 interrupt_num);
+int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
+ u16 interrupt_num);
void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar);
#else
static inline void dw_pcie_ep_linkup(struct dw_pcie_ep *ep)
@@ -374,12 +368,23 @@
{
}
+static inline int dw_pcie_ep_raise_legacy_irq(struct dw_pcie_ep *ep, u8 func_no)
+{
+ return 0;
+}
+
static inline int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep, u8 func_no,
u8 interrupt_num)
{
return 0;
}
+static inline int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
+ u16 interrupt_num)
+{
+ return 0;
+}
+
static inline void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar)
{
}
diff --git a/drivers/pci/controller/dwc/pcie-histb.c b/drivers/pci/controller/dwc/pcie-histb.c
index 3611d6c..7b32e61 100644
--- a/drivers/pci/controller/dwc/pcie-histb.c
+++ b/drivers/pci/controller/dwc/pcie-histb.c
@@ -420,7 +420,6 @@
phy_init(hipcie->phy);
}
- pp->root_bus_nr = -1;
pp->ops = &histb_pcie_host_ops;
platform_set_drvdata(pdev, hipcie);
diff --git a/drivers/pci/controller/dwc/pcie-kirin.c b/drivers/pci/controller/dwc/pcie-kirin.c
index d2970a0..5352e0c 100644
--- a/drivers/pci/controller/dwc/pcie-kirin.c
+++ b/drivers/pci/controller/dwc/pcie-kirin.c
@@ -430,6 +430,9 @@
{
kirin_pcie_establish_link(pp);
+ if (IS_ENABLED(CONFIG_PCI_MSI))
+ dw_pcie_msi_init(pp);
+
return 0;
}
@@ -445,9 +448,34 @@
.host_init = kirin_pcie_host_init,
};
+static int kirin_pcie_add_msi(struct dw_pcie *pci,
+ struct platform_device *pdev)
+{
+ int irq;
+
+ if (IS_ENABLED(CONFIG_PCI_MSI)) {
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev,
+ "failed to get MSI IRQ (%d)\n", irq);
+ return irq;
+ }
+
+ pci->pp.msi_irq = irq;
+ }
+
+ return 0;
+}
+
static int __init kirin_add_pcie_port(struct dw_pcie *pci,
struct platform_device *pdev)
{
+ int ret;
+
+ ret = kirin_pcie_add_msi(pci, pdev);
+ if (ret)
+ return ret;
+
pci->pp.ops = &kirin_pcie_host_ops;
return dw_pcie_host_init(&pci->pp);
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index a1d0198..4352c1c 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1251,7 +1251,6 @@
if (ret)
return ret;
- pp->root_bus_nr = -1;
pp->ops = &qcom_pcie_dw_ops;
if (IS_ENABLED(CONFIG_PCI_MSI)) {
diff --git a/drivers/pci/controller/dwc/pcie-spear13xx.c b/drivers/pci/controller/dwc/pcie-spear13xx.c
index ecb58f7..7d0cdfd 100644
--- a/drivers/pci/controller/dwc/pcie-spear13xx.c
+++ b/drivers/pci/controller/dwc/pcie-spear13xx.c
@@ -210,7 +210,6 @@
return ret;
}
- pp->root_bus_nr = -1;
pp->ops = &spear13xx_pcie_host_ops;
ret = dw_pcie_host_init(pp);
diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index d3172d5..6b4555f 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -111,24 +111,6 @@
#define PCIE_MSI_MASK_REG (CONTROL_BASE_ADDR + 0x5C)
#define PCIE_MSI_PAYLOAD_REG (CONTROL_BASE_ADDR + 0x9C)
-/* PCIe window configuration */
-#define OB_WIN_BASE_ADDR 0x4c00
-#define OB_WIN_BLOCK_SIZE 0x20
-#define OB_WIN_REG_ADDR(win, offset) (OB_WIN_BASE_ADDR + \
- OB_WIN_BLOCK_SIZE * (win) + \
- (offset))
-#define OB_WIN_MATCH_LS(win) OB_WIN_REG_ADDR(win, 0x00)
-#define OB_WIN_MATCH_MS(win) OB_WIN_REG_ADDR(win, 0x04)
-#define OB_WIN_REMAP_LS(win) OB_WIN_REG_ADDR(win, 0x08)
-#define OB_WIN_REMAP_MS(win) OB_WIN_REG_ADDR(win, 0x0c)
-#define OB_WIN_MASK_LS(win) OB_WIN_REG_ADDR(win, 0x10)
-#define OB_WIN_MASK_MS(win) OB_WIN_REG_ADDR(win, 0x14)
-#define OB_WIN_ACTIONS(win) OB_WIN_REG_ADDR(win, 0x18)
-
-/* PCIe window types */
-#define OB_PCIE_MEM 0x0
-#define OB_PCIE_IO 0x4
-
/* LMI registers base address and register offsets */
#define LMI_BASE_ADDR 0x6000
#define CFG_REG (LMI_BASE_ADDR + 0x0)
@@ -247,34 +229,9 @@
return -ETIMEDOUT;
}
-/*
- * Set PCIe address window register which could be used for memory
- * mapping.
- */
-static void advk_pcie_set_ob_win(struct advk_pcie *pcie,
- u32 win_num, u32 match_ms,
- u32 match_ls, u32 mask_ms,
- u32 mask_ls, u32 remap_ms,
- u32 remap_ls, u32 action)
-{
- advk_writel(pcie, match_ls, OB_WIN_MATCH_LS(win_num));
- advk_writel(pcie, match_ms, OB_WIN_MATCH_MS(win_num));
- advk_writel(pcie, mask_ms, OB_WIN_MASK_MS(win_num));
- advk_writel(pcie, mask_ls, OB_WIN_MASK_LS(win_num));
- advk_writel(pcie, remap_ms, OB_WIN_REMAP_MS(win_num));
- advk_writel(pcie, remap_ls, OB_WIN_REMAP_LS(win_num));
- advk_writel(pcie, action, OB_WIN_ACTIONS(win_num));
- advk_writel(pcie, match_ls | BIT(0), OB_WIN_MATCH_LS(win_num));
-}
-
static void advk_pcie_setup_hw(struct advk_pcie *pcie)
{
u32 reg;
- int i;
-
- /* Point PCIe unit MBUS decode windows to DRAM space */
- for (i = 0; i < 8; i++)
- advk_pcie_set_ob_win(pcie, i, 0, 0, 0, 0, 0, 0, 0);
/* Set to Direct mode */
reg = advk_readl(pcie, CTRL_CONFIG_REG);
@@ -433,6 +390,15 @@
return -ETIMEDOUT;
}
+static bool advk_pcie_valid_device(struct advk_pcie *pcie, struct pci_bus *bus,
+ int devfn)
+{
+ if ((bus->number == pcie->root_bus_nr) && PCI_SLOT(devfn) != 0)
+ return false;
+
+ return true;
+}
+
static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
int where, int size, u32 *val)
{
@@ -440,7 +406,7 @@
u32 reg;
int ret;
- if ((bus->number == pcie->root_bus_nr) && PCI_SLOT(devfn) != 0) {
+ if (!advk_pcie_valid_device(pcie, bus, devfn)) {
*val = 0xffffffff;
return PCIBIOS_DEVICE_NOT_FOUND;
}
@@ -494,7 +460,7 @@
int offset;
int ret;
- if ((bus->number == pcie->root_bus_nr) && PCI_SLOT(devfn) != 0)
+ if (!advk_pcie_valid_device(pcie, bus, devfn))
return PCIBIOS_DEVICE_NOT_FOUND;
if (where % size)
@@ -843,13 +809,7 @@
switch (resource_type(res)) {
case IORESOURCE_IO:
- advk_pcie_set_ob_win(pcie, 1,
- upper_32_bits(res->start),
- lower_32_bits(res->start),
- 0, 0xF8000000, 0,
- lower_32_bits(res->start),
- OB_PCIE_IO);
- err = pci_remap_iospace(res, iobase);
+ err = devm_pci_remap_iospace(dev, res, iobase);
if (err) {
dev_warn(dev, "error %d: failed to map resource %pR\n",
err, res);
@@ -857,12 +817,6 @@
}
break;
case IORESOURCE_MEM:
- advk_pcie_set_ob_win(pcie, 0,
- upper_32_bits(res->start),
- lower_32_bits(res->start),
- 0x0, 0xF8000000, 0,
- lower_32_bits(res->start),
- (2 << 20) | OB_PCIE_MEM);
res_valid |= !(res->flags & IORESOURCE_PREFETCH);
break;
case IORESOURCE_BUS:
@@ -889,7 +843,6 @@
struct device *dev = &pdev->dev;
struct advk_pcie *pcie;
struct resource *res;
- struct pci_bus *bus, *child;
struct pci_host_bridge *bridge;
int ret, irq;
@@ -943,21 +896,13 @@
bridge->map_irq = of_irq_parse_and_map_pci;
bridge->swizzle_irq = pci_common_swizzle;
- ret = pci_scan_root_bus_bridge(bridge);
+ ret = pci_host_probe(bridge);
if (ret < 0) {
advk_pcie_remove_msi_irq_domain(pcie);
advk_pcie_remove_irq_domain(pcie);
return ret;
}
- bus = bridge->bus;
-
- pci_bus_assign_resources(bus);
-
- list_for_each_entry(child, &bus->children, node)
- pcie_bus_configure_settings(child);
-
- pci_bus_add_devices(bus);
return 0;
}
diff --git a/drivers/pci/controller/pci-ftpci100.c b/drivers/pci/controller/pci-ftpci100.c
index a1ebe9e..bf5ece5 100644
--- a/drivers/pci/controller/pci-ftpci100.c
+++ b/drivers/pci/controller/pci-ftpci100.c
@@ -355,11 +355,13 @@
irq = of_irq_get(intc, 0);
if (irq <= 0) {
dev_err(p->dev, "failed to get parent IRQ\n");
+ of_node_put(intc);
return irq ?: -EINVAL;
}
p->irqdomain = irq_domain_add_linear(intc, PCI_NUM_INTX,
&faraday_pci_irqdomain_ops, p);
+ of_node_put(intc);
if (!p->irqdomain) {
dev_err(p->dev, "failed to create Gemini PCI IRQ domain\n");
return -EINVAL;
@@ -501,7 +503,7 @@
dev_err(dev, "illegal IO mem size\n");
return -EINVAL;
}
- ret = pci_remap_iospace(io, io_base);
+ ret = devm_pci_remap_iospace(dev, io, io_base);
if (ret) {
dev_warn(dev, "error %d: failed to map resource %pR\n",
ret, io);
diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index 6cc5036..eb20296 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -1073,6 +1073,7 @@
struct pci_bus *pbus;
struct pci_dev *pdev;
struct cpumask *dest;
+ unsigned long flags;
struct compose_comp_ctxt comp;
struct tran_int_desc *int_desc;
struct {
@@ -1164,14 +1165,15 @@
* the channel callback directly when channel->target_cpu is
* the current CPU. When the higher level interrupt code
* calls us with interrupt enabled, let's add the
- * local_bh_disable()/enable() to avoid race.
+ * local_irq_save()/restore() to avoid race:
+ * hv_pci_onchannelcallback() can also run in tasklet.
*/
- local_bh_disable();
+ local_irq_save(flags);
if (hbus->hdev->channel->target_cpu == smp_processor_id())
hv_pci_onchannelcallback(hbus);
- local_bh_enable();
+ local_irq_restore(flags);
if (hpdev->state == hv_pcichild_ejecting) {
dev_err_once(&hbus->hdev->device,
@@ -1543,7 +1545,7 @@
unsigned long flags;
int ret;
- hpdev = kzalloc(sizeof(*hpdev), GFP_ATOMIC);
+ hpdev = kzalloc(sizeof(*hpdev), GFP_KERNEL);
if (!hpdev)
return NULL;
diff --git a/drivers/pci/controller/pci-v3-semi.c b/drivers/pci/controller/pci-v3-semi.c
index 68b8bfb..d219404 100644
--- a/drivers/pci/controller/pci-v3-semi.c
+++ b/drivers/pci/controller/pci-v3-semi.c
@@ -537,7 +537,7 @@
v3->io_bus_addr = io->start - win->offset;
dev_dbg(dev, "I/O window %pR, bus addr %pap\n",
io, &v3->io_bus_addr);
- ret = pci_remap_iospace(io, io_base);
+ ret = devm_pci_remap_iospace(dev, io, io_base);
if (ret) {
dev_warn(dev,
"error %d: failed to map resource %pR\n",
diff --git a/drivers/pci/controller/pci-versatile.c b/drivers/pci/controller/pci-versatile.c
index 994f320..f59ad27 100644
--- a/drivers/pci/controller/pci-versatile.c
+++ b/drivers/pci/controller/pci-versatile.c
@@ -82,7 +82,7 @@
switch (resource_type(res)) {
case IORESOURCE_IO:
- err = pci_remap_iospace(res, iobase);
+ err = devm_pci_remap_iospace(dev, res, iobase);
if (err) {
dev_warn(dev, "error %d: failed to map resource %pR\n",
err, res);
diff --git a/drivers/pci/controller/pci-xgene.c b/drivers/pci/controller/pci-xgene.c
index d854d67..ffda3e8 100644
--- a/drivers/pci/controller/pci-xgene.c
+++ b/drivers/pci/controller/pci-xgene.c
@@ -423,7 +423,7 @@
case IORESOURCE_IO:
xgene_pcie_setup_ob_reg(port, res, OMR3BARL, io_base,
res->start - window->offset);
- ret = pci_remap_iospace(res, io_base);
+ ret = devm_pci_remap_iospace(dev, res, io_base);
if (ret < 0)
return ret;
break;
diff --git a/drivers/pci/controller/pcie-cadence-ep.c b/drivers/pci/controller/pcie-cadence-ep.c
index e3fe412..9e87dd7 100644
--- a/drivers/pci/controller/pcie-cadence-ep.c
+++ b/drivers/pci/controller/pcie-cadence-ep.c
@@ -238,7 +238,7 @@
struct cdns_pcie_ep *ep = epc_get_drvdata(epc);
struct cdns_pcie *pcie = &ep->pcie;
u32 cap = CDNS_PCIE_EP_FUNC_MSI_CAP_OFFSET;
- u16 flags, mmc, mme;
+ u16 flags, mme;
/* Validate that the MSI feature is actually enabled. */
flags = cdns_pcie_ep_fn_readw(pcie, fn, cap + PCI_MSI_FLAGS);
@@ -249,7 +249,6 @@
* Get the Multiple Message Enable bitfield from the Message Control
* register.
*/
- mmc = (flags & PCI_MSI_FLAGS_QMASK) >> 1;
mme = (flags & PCI_MSI_FLAGS_QSIZE) >> 4;
return mme;
@@ -363,7 +362,8 @@
}
static int cdns_pcie_ep_raise_irq(struct pci_epc *epc, u8 fn,
- enum pci_epc_irq_type type, u8 interrupt_num)
+ enum pci_epc_irq_type type,
+ u16 interrupt_num)
{
struct cdns_pcie_ep *ep = epc_get_drvdata(epc);
@@ -439,6 +439,7 @@
struct pci_epc *epc;
struct resource *res;
int ret;
+ int phy_count;
ep = devm_kzalloc(dev, sizeof(*ep), GFP_KERNEL);
if (!ep)
@@ -473,6 +474,12 @@
if (!ep->ob_addr)
return -ENOMEM;
+ ret = cdns_pcie_init_phy(dev, pcie);
+ if (ret) {
+ dev_err(dev, "failed to init phy\n");
+ return ret;
+ }
+ platform_set_drvdata(pdev, pcie);
pm_runtime_enable(dev);
ret = pm_runtime_get_sync(dev);
if (ret < 0) {
@@ -521,6 +528,10 @@
err_get_sync:
pm_runtime_disable(dev);
+ cdns_pcie_disable_phy(pcie);
+ phy_count = pcie->phy_count;
+ while (phy_count--)
+ device_link_del(pcie->link[phy_count]);
return ret;
}
@@ -528,6 +539,7 @@
static void cdns_pcie_ep_shutdown(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
+ struct cdns_pcie *pcie = dev_get_drvdata(dev);
int ret;
ret = pm_runtime_put_sync(dev);
@@ -536,13 +548,14 @@
pm_runtime_disable(dev);
- /* The PCIe controller can't be disabled. */
+ cdns_pcie_disable_phy(pcie);
}
static struct platform_driver cdns_pcie_ep_driver = {
.driver = {
.name = "cdns-pcie-ep",
.of_match_table = cdns_pcie_ep_of_match,
+ .pm = &cdns_pcie_pm_ops,
},
.probe = cdns_pcie_ep_probe,
.shutdown = cdns_pcie_ep_shutdown,
diff --git a/drivers/pci/controller/pcie-cadence-host.c b/drivers/pci/controller/pcie-cadence-host.c
index a4ebbd3..ec394f6 100644
--- a/drivers/pci/controller/pcie-cadence-host.c
+++ b/drivers/pci/controller/pcie-cadence-host.c
@@ -58,6 +58,11 @@
return pcie->reg_base + (where & 0xfff);
}
+ /* Check that the link is up */
+ if (!(cdns_pcie_readl(pcie, CDNS_PCIE_LM_BASE) & 0x1))
+ return NULL;
+ /* Clear AXI link-down status */
+ cdns_pcie_writel(pcie, CDNS_PCIE_AT_LINKDOWN, 0x0);
/* Update Output registers for AXI region 0. */
addr0 = CDNS_PCIE_AT_OB_REGION_PCI_ADDR0_NBITS(12) |
@@ -239,6 +244,7 @@
struct cdns_pcie *pcie;
struct resource *res;
int ret;
+ int phy_count;
bridge = devm_pci_alloc_host_bridge(dev, sizeof(*rc));
if (!bridge)
@@ -290,6 +296,13 @@
}
pcie->mem_res = res;
+ ret = cdns_pcie_init_phy(dev, pcie);
+ if (ret) {
+ dev_err(dev, "failed to init phy\n");
+ return ret;
+ }
+ platform_set_drvdata(pdev, pcie);
+
pm_runtime_enable(dev);
ret = pm_runtime_get_sync(dev);
if (ret < 0) {
@@ -322,15 +335,35 @@
err_get_sync:
pm_runtime_disable(dev);
+ cdns_pcie_disable_phy(pcie);
+ phy_count = pcie->phy_count;
+ while (phy_count--)
+ device_link_del(pcie->link[phy_count]);
return ret;
}
+static void cdns_pcie_shutdown(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct cdns_pcie *pcie = dev_get_drvdata(dev);
+ int ret;
+
+ ret = pm_runtime_put_sync(dev);
+ if (ret < 0)
+ dev_dbg(dev, "pm_runtime_put_sync failed\n");
+
+ pm_runtime_disable(dev);
+ cdns_pcie_disable_phy(pcie);
+}
+
static struct platform_driver cdns_pcie_host_driver = {
.driver = {
.name = "cdns-pcie-host",
.of_match_table = cdns_pcie_host_of_match,
+ .pm = &cdns_pcie_pm_ops,
},
.probe = cdns_pcie_host_probe,
+ .shutdown = cdns_pcie_shutdown,
};
builtin_platform_driver(cdns_pcie_host_driver);
diff --git a/drivers/pci/controller/pcie-cadence.c b/drivers/pci/controller/pcie-cadence.c
index 138d113..86f1b00 100644
--- a/drivers/pci/controller/pcie-cadence.c
+++ b/drivers/pci/controller/pcie-cadence.c
@@ -124,3 +124,126 @@
cdns_pcie_writel(pcie, CDNS_PCIE_AT_OB_REGION_CPU_ADDR0(r), 0);
cdns_pcie_writel(pcie, CDNS_PCIE_AT_OB_REGION_CPU_ADDR1(r), 0);
}
+
+void cdns_pcie_disable_phy(struct cdns_pcie *pcie)
+{
+ int i = pcie->phy_count;
+
+ while (i--) {
+ phy_power_off(pcie->phy[i]);
+ phy_exit(pcie->phy[i]);
+ }
+}
+
+int cdns_pcie_enable_phy(struct cdns_pcie *pcie)
+{
+ int ret;
+ int i;
+
+ for (i = 0; i < pcie->phy_count; i++) {
+ ret = phy_init(pcie->phy[i]);
+ if (ret < 0)
+ goto err_phy;
+
+ ret = phy_power_on(pcie->phy[i]);
+ if (ret < 0) {
+ phy_exit(pcie->phy[i]);
+ goto err_phy;
+ }
+ }
+
+ return 0;
+
+err_phy:
+ while (--i >= 0) {
+ phy_power_off(pcie->phy[i]);
+ phy_exit(pcie->phy[i]);
+ }
+
+ return ret;
+}
+
+int cdns_pcie_init_phy(struct device *dev, struct cdns_pcie *pcie)
+{
+ struct device_node *np = dev->of_node;
+ int phy_count;
+ struct phy **phy;
+ struct device_link **link;
+ int i;
+ int ret;
+ const char *name;
+
+ phy_count = of_property_count_strings(np, "phy-names");
+ if (phy_count < 1) {
+ dev_err(dev, "no phy-names. PHY will not be initialized\n");
+ pcie->phy_count = 0;
+ return 0;
+ }
+
+ phy = devm_kzalloc(dev, sizeof(*phy) * phy_count, GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
+
+ link = devm_kzalloc(dev, sizeof(*link) * phy_count, GFP_KERNEL);
+ if (!link)
+ return -ENOMEM;
+
+ for (i = 0; i < phy_count; i++) {
+ of_property_read_string_index(np, "phy-names", i, &name);
+ phy[i] = devm_phy_optional_get(dev, name);
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
+
+ link[i] = device_link_add(dev, &phy[i]->dev, DL_FLAG_STATELESS);
+ if (!link[i]) {
+ ret = -EINVAL;
+ goto err_link;
+ }
+ }
+
+ pcie->phy_count = phy_count;
+ pcie->phy = phy;
+ pcie->link = link;
+
+ ret = cdns_pcie_enable_phy(pcie);
+ if (ret)
+ goto err_link;
+
+ return 0;
+
+err_link:
+ while (--i >= 0)
+ device_link_del(link[i]);
+
+ return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int cdns_pcie_suspend_noirq(struct device *dev)
+{
+ struct cdns_pcie *pcie = dev_get_drvdata(dev);
+
+ cdns_pcie_disable_phy(pcie);
+
+ return 0;
+}
+
+static int cdns_pcie_resume_noirq(struct device *dev)
+{
+ struct cdns_pcie *pcie = dev_get_drvdata(dev);
+ int ret;
+
+ ret = cdns_pcie_enable_phy(pcie);
+ if (ret) {
+ dev_err(dev, "failed to enable phy\n");
+ return ret;
+ }
+
+ return 0;
+}
+#endif
+
+const struct dev_pm_ops cdns_pcie_pm_ops = {
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(cdns_pcie_suspend_noirq,
+ cdns_pcie_resume_noirq)
+};
diff --git a/drivers/pci/controller/pcie-cadence.h b/drivers/pci/controller/pcie-cadence.h
index 4bb2733..ae6bf2a 100644
--- a/drivers/pci/controller/pcie-cadence.h
+++ b/drivers/pci/controller/pcie-cadence.h
@@ -8,6 +8,7 @@
#include <linux/kernel.h>
#include <linux/pci.h>
+#include <linux/phy/phy.h>
/*
* Local Management Registers
@@ -165,6 +166,9 @@
#define CDNS_PCIE_AT_IB_RP_BAR_ADDR1(bar) \
(CDNS_PCIE_AT_BASE + 0x0804 + (bar) * 0x0008)
+/* AXI link down register */
+#define CDNS_PCIE_AT_LINKDOWN (CDNS_PCIE_AT_BASE + 0x0824)
+
enum cdns_pcie_rp_bar {
RP_BAR0,
RP_BAR1,
@@ -229,6 +233,9 @@
struct resource *mem_res;
bool is_rc;
u8 bus;
+ int phy_count;
+ struct phy **phy;
+ struct device_link **link;
};
/* Register access */
@@ -279,7 +286,7 @@
}
static inline void cdns_pcie_ep_fn_writel(struct cdns_pcie *pcie, u8 fn,
- u32 reg, u16 value)
+ u32 reg, u32 value)
{
writel(value, pcie->reg_base + CDNS_PCIE_EP_FUNC_BASE(fn) + reg);
}
@@ -307,5 +314,9 @@
u32 r, u64 cpu_addr);
void cdns_pcie_reset_outbound_region(struct cdns_pcie *pcie, u32 r);
+void cdns_pcie_disable_phy(struct cdns_pcie *pcie);
+int cdns_pcie_enable_phy(struct cdns_pcie *pcie);
+int cdns_pcie_init_phy(struct device *dev, struct cdns_pcie *pcie);
+extern const struct dev_pm_ops cdns_pcie_pm_ops;
#endif /* _PCIE_CADENCE_H */
diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c
index 0baabe3..861dda6 100644
--- a/drivers/pci/controller/pcie-mediatek.c
+++ b/drivers/pci/controller/pcie-mediatek.c
@@ -1109,7 +1109,7 @@
if (err < 0)
return err;
- pci_remap_iospace(&pcie->pio, pcie->io.start);
+ devm_pci_remap_iospace(dev, &pcie->pio, pcie->io.start);
return 0;
}
diff --git a/drivers/pci/controller/pcie-mobiveil.c b/drivers/pci/controller/pcie-mobiveil.c
index 4d6c20e..cf0aa7c 100644
--- a/drivers/pci/controller/pcie-mobiveil.c
+++ b/drivers/pci/controller/pcie-mobiveil.c
@@ -107,7 +107,7 @@
#define CFG_WINDOW_TYPE 0
#define IO_WINDOW_TYPE 1
#define MEM_WINDOW_TYPE 2
-#define IB_WIN_SIZE (256 * 1024 * 1024 * 1024)
+#define IB_WIN_SIZE ((u64)256 * 1024 * 1024 * 1024)
#define MAX_PIO_WINDOWS 8
/* Parameters for the waiting for link up routine */
diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar.c
index 874d75c..c8febb0 100644
--- a/drivers/pci/controller/pcie-rcar.c
+++ b/drivers/pci/controller/pcie-rcar.c
@@ -680,7 +680,11 @@
if (err)
return err;
- return phy_power_on(pcie->phy);
+ err = phy_power_on(pcie->phy);
+ if (err)
+ phy_exit(pcie->phy);
+
+ return err;
}
static int rcar_msi_alloc(struct rcar_msi *chip)
@@ -1165,7 +1169,7 @@
if (rcar_pcie_hw_init(pcie)) {
dev_info(dev, "PCIe link down\n");
err = -ENODEV;
- goto err_clk_disable;
+ goto err_phy_shutdown;
}
data = rcar_pci_read_reg(pcie, MACSR);
@@ -1177,7 +1181,7 @@
dev_err(dev,
"failed to enable MSI support: %d\n",
err);
- goto err_clk_disable;
+ goto err_phy_shutdown;
}
}
@@ -1191,6 +1195,12 @@
if (IS_ENABLED(CONFIG_PCI_MSI))
rcar_pcie_teardown_msi(pcie);
+err_phy_shutdown:
+ if (pcie->phy) {
+ phy_power_off(pcie->phy);
+ phy_exit(pcie->phy);
+ }
+
err_clk_disable:
clk_disable_unprepare(pcie->bus_clk);
diff --git a/drivers/pci/controller/pcie-rockchip-ep.c b/drivers/pci/controller/pcie-rockchip-ep.c
index 6beba8e..b8163c5 100644
--- a/drivers/pci/controller/pcie-rockchip-ep.c
+++ b/drivers/pci/controller/pcie-rockchip-ep.c
@@ -472,7 +472,7 @@
static int rockchip_pcie_ep_raise_irq(struct pci_epc *epc, u8 fn,
enum pci_epc_irq_type type,
- u8 interrupt_num)
+ u16 interrupt_num)
{
struct rockchip_pcie_ep *ep = epc_get_drvdata(epc);
diff --git a/drivers/pci/controller/pcie-xilinx-nwl.c b/drivers/pci/controller/pcie-xilinx-nwl.c
index 6a4bbb5..fb32840 100644
--- a/drivers/pci/controller/pcie-xilinx-nwl.c
+++ b/drivers/pci/controller/pcie-xilinx-nwl.c
@@ -559,7 +559,7 @@
PCI_NUM_INTX,
&legacy_domain_ops,
pcie);
-
+ of_node_put(legacy_intc_node);
if (!pcie->legacy_irq_domain) {
dev_err(dev, "failed to create IRQ domain\n");
return -ENOMEM;
diff --git a/drivers/pci/controller/pcie-xilinx.c b/drivers/pci/controller/pcie-xilinx.c
index b110a3a..7b1389d 100644
--- a/drivers/pci/controller/pcie-xilinx.c
+++ b/drivers/pci/controller/pcie-xilinx.c
@@ -509,6 +509,7 @@
port->leg_domain = irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX,
&intx_domain_ops,
port);
+ of_node_put(pcie_intc_node);
if (!port->leg_domain) {
dev_err(dev, "Failed to get a INTx IRQ domain\n");
return -ENODEV;
diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c
index 63ed706..3e86fa3 100644
--- a/drivers/pci/endpoint/functions/pci-epf-test.c
+++ b/drivers/pci/endpoint/functions/pci-epf-test.c
@@ -18,13 +18,16 @@
#include <linux/pci-epf.h>
#include <linux/pci_regs.h>
+#define IRQ_TYPE_LEGACY 0
+#define IRQ_TYPE_MSI 1
+#define IRQ_TYPE_MSIX 2
+
#define COMMAND_RAISE_LEGACY_IRQ BIT(0)
#define COMMAND_RAISE_MSI_IRQ BIT(1)
-#define MSI_NUMBER_SHIFT 2
-#define MSI_NUMBER_MASK (0x3f << MSI_NUMBER_SHIFT)
-#define COMMAND_READ BIT(8)
-#define COMMAND_WRITE BIT(9)
-#define COMMAND_COPY BIT(10)
+#define COMMAND_RAISE_MSIX_IRQ BIT(2)
+#define COMMAND_READ BIT(3)
+#define COMMAND_WRITE BIT(4)
+#define COMMAND_COPY BIT(5)
#define STATUS_READ_SUCCESS BIT(0)
#define STATUS_READ_FAIL BIT(1)
@@ -45,6 +48,7 @@
struct pci_epf *epf;
enum pci_barno test_reg_bar;
bool linkup_notifier;
+ bool msix_available;
struct delayed_work cmd_handler;
};
@@ -56,6 +60,8 @@
u64 dst_addr;
u32 size;
u32 checksum;
+ u32 irq_type;
+ u32 irq_number;
} __packed;
static struct pci_epf_header test_header = {
@@ -244,31 +250,42 @@
return ret;
}
-static void pci_epf_test_raise_irq(struct pci_epf_test *epf_test, u8 irq)
+static void pci_epf_test_raise_irq(struct pci_epf_test *epf_test, u8 irq_type,
+ u16 irq)
{
- u8 msi_count;
struct pci_epf *epf = epf_test->epf;
+ struct device *dev = &epf->dev;
struct pci_epc *epc = epf->epc;
enum pci_barno test_reg_bar = epf_test->test_reg_bar;
struct pci_epf_test_reg *reg = epf_test->reg[test_reg_bar];
reg->status |= STATUS_IRQ_RAISED;
- msi_count = pci_epc_get_msi(epc, epf->func_no);
- if (irq > msi_count || msi_count <= 0)
+
+ switch (irq_type) {
+ case IRQ_TYPE_LEGACY:
pci_epc_raise_irq(epc, epf->func_no, PCI_EPC_IRQ_LEGACY, 0);
- else
+ break;
+ case IRQ_TYPE_MSI:
pci_epc_raise_irq(epc, epf->func_no, PCI_EPC_IRQ_MSI, irq);
+ break;
+ case IRQ_TYPE_MSIX:
+ pci_epc_raise_irq(epc, epf->func_no, PCI_EPC_IRQ_MSIX, irq);
+ break;
+ default:
+ dev_err(dev, "Failed to raise IRQ, unknown type\n");
+ break;
+ }
}
static void pci_epf_test_cmd_handler(struct work_struct *work)
{
int ret;
- u8 irq;
- u8 msi_count;
+ int count;
u32 command;
struct pci_epf_test *epf_test = container_of(work, struct pci_epf_test,
cmd_handler.work);
struct pci_epf *epf = epf_test->epf;
+ struct device *dev = &epf->dev;
struct pci_epc *epc = epf->epc;
enum pci_barno test_reg_bar = epf_test->test_reg_bar;
struct pci_epf_test_reg *reg = epf_test->reg[test_reg_bar];
@@ -280,7 +297,10 @@
reg->command = 0;
reg->status = 0;
- irq = (command & MSI_NUMBER_MASK) >> MSI_NUMBER_SHIFT;
+ if (reg->irq_type > IRQ_TYPE_MSIX) {
+ dev_err(dev, "Failed to detect IRQ type\n");
+ goto reset_handler;
+ }
if (command & COMMAND_RAISE_LEGACY_IRQ) {
reg->status = STATUS_IRQ_RAISED;
@@ -294,7 +314,8 @@
reg->status |= STATUS_WRITE_FAIL;
else
reg->status |= STATUS_WRITE_SUCCESS;
- pci_epf_test_raise_irq(epf_test, irq);
+ pci_epf_test_raise_irq(epf_test, reg->irq_type,
+ reg->irq_number);
goto reset_handler;
}
@@ -304,7 +325,8 @@
reg->status |= STATUS_READ_SUCCESS;
else
reg->status |= STATUS_READ_FAIL;
- pci_epf_test_raise_irq(epf_test, irq);
+ pci_epf_test_raise_irq(epf_test, reg->irq_type,
+ reg->irq_number);
goto reset_handler;
}
@@ -314,16 +336,28 @@
reg->status |= STATUS_COPY_SUCCESS;
else
reg->status |= STATUS_COPY_FAIL;
- pci_epf_test_raise_irq(epf_test, irq);
+ pci_epf_test_raise_irq(epf_test, reg->irq_type,
+ reg->irq_number);
goto reset_handler;
}
if (command & COMMAND_RAISE_MSI_IRQ) {
- msi_count = pci_epc_get_msi(epc, epf->func_no);
- if (irq > msi_count || msi_count <= 0)
+ count = pci_epc_get_msi(epc, epf->func_no);
+ if (reg->irq_number > count || count <= 0)
goto reset_handler;
reg->status = STATUS_IRQ_RAISED;
- pci_epc_raise_irq(epc, epf->func_no, PCI_EPC_IRQ_MSI, irq);
+ pci_epc_raise_irq(epc, epf->func_no, PCI_EPC_IRQ_MSI,
+ reg->irq_number);
+ goto reset_handler;
+ }
+
+ if (command & COMMAND_RAISE_MSIX_IRQ) {
+ count = pci_epc_get_msix(epc, epf->func_no);
+ if (reg->irq_number > count || count <= 0)
+ goto reset_handler;
+ reg->status = STATUS_IRQ_RAISED;
+ pci_epc_raise_irq(epc, epf->func_no, PCI_EPC_IRQ_MSIX,
+ reg->irq_number);
goto reset_handler;
}
@@ -440,6 +474,8 @@
else
epf_test->linkup_notifier = true;
+ epf_test->msix_available = epc->features & EPC_FEATURE_MSIX_AVAILABLE;
+
epf_test->test_reg_bar = EPC_FEATURE_GET_BAR(epc->features);
ret = pci_epc_write_header(epc, epf->func_no, header);
@@ -457,8 +493,18 @@
return ret;
ret = pci_epc_set_msi(epc, epf->func_no, epf->msi_interrupts);
- if (ret)
+ if (ret) {
+ dev_err(dev, "MSI configuration failed\n");
return ret;
+ }
+
+ if (epf_test->msix_available) {
+ ret = pci_epc_set_msix(epc, epf->func_no, epf->msix_interrupts);
+ if (ret) {
+ dev_err(dev, "MSI-X configuration failed\n");
+ return ret;
+ }
+ }
if (!epf_test->linkup_notifier)
queue_work(kpcitest_workqueue, &epf_test->cmd_handler.work);
diff --git a/drivers/pci/endpoint/pci-ep-cfs.c b/drivers/pci/endpoint/pci-ep-cfs.c
index 018ea34..d1288a0 100644
--- a/drivers/pci/endpoint/pci-ep-cfs.c
+++ b/drivers/pci/endpoint/pci-ep-cfs.c
@@ -286,6 +286,28 @@
to_pci_epf_group(item)->epf->msi_interrupts);
}
+static ssize_t pci_epf_msix_interrupts_store(struct config_item *item,
+ const char *page, size_t len)
+{
+ u16 val;
+ int ret;
+
+ ret = kstrtou16(page, 0, &val);
+ if (ret)
+ return ret;
+
+ to_pci_epf_group(item)->epf->msix_interrupts = val;
+
+ return len;
+}
+
+static ssize_t pci_epf_msix_interrupts_show(struct config_item *item,
+ char *page)
+{
+ return sprintf(page, "%d\n",
+ to_pci_epf_group(item)->epf->msix_interrupts);
+}
+
PCI_EPF_HEADER_R(vendorid)
PCI_EPF_HEADER_W_u16(vendorid)
@@ -327,6 +349,7 @@
CONFIGFS_ATTR(pci_epf_, subsys_id);
CONFIGFS_ATTR(pci_epf_, interrupt_pin);
CONFIGFS_ATTR(pci_epf_, msi_interrupts);
+CONFIGFS_ATTR(pci_epf_, msix_interrupts);
static struct configfs_attribute *pci_epf_attrs[] = {
&pci_epf_attr_vendorid,
@@ -340,6 +363,7 @@
&pci_epf_attr_subsys_id,
&pci_epf_attr_interrupt_pin,
&pci_epf_attr_msi_interrupts,
+ &pci_epf_attr_msix_interrupts,
NULL,
};
diff --git a/drivers/pci/endpoint/pci-epc-core.c b/drivers/pci/endpoint/pci-epc-core.c
index b0ee427..094dcc3 100644
--- a/drivers/pci/endpoint/pci-epc-core.c
+++ b/drivers/pci/endpoint/pci-epc-core.c
@@ -131,13 +131,13 @@
* pci_epc_raise_irq() - interrupt the host system
* @epc: the EPC device which has to interrupt the host
* @func_no: the endpoint function number in the EPC device
- * @type: specify the type of interrupt; legacy or MSI
- * @interrupt_num: the MSI interrupt number
+ * @type: specify the type of interrupt; legacy, MSI or MSI-X
+ * @interrupt_num: the MSI or MSI-X interrupt number
*
- * Invoke to raise an MSI or legacy interrupt
+ * Invoke to raise an legacy, MSI or MSI-X interrupt
*/
int pci_epc_raise_irq(struct pci_epc *epc, u8 func_no,
- enum pci_epc_irq_type type, u8 interrupt_num)
+ enum pci_epc_irq_type type, u16 interrupt_num)
{
int ret;
unsigned long flags;
@@ -201,7 +201,8 @@
u8 encode_int;
unsigned long flags;
- if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
+ if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions ||
+ interrupts > 32)
return -EINVAL;
if (!epc->ops->set_msi)
@@ -218,6 +219,63 @@
EXPORT_SYMBOL_GPL(pci_epc_set_msi);
/**
+ * pci_epc_get_msix() - get the number of MSI-X interrupt numbers allocated
+ * @epc: the EPC device to which MSI-X interrupts was requested
+ * @func_no: the endpoint function number in the EPC device
+ *
+ * Invoke to get the number of MSI-X interrupts allocated by the RC
+ */
+int pci_epc_get_msix(struct pci_epc *epc, u8 func_no)
+{
+ int interrupt;
+ unsigned long flags;
+
+ if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
+ return 0;
+
+ if (!epc->ops->get_msix)
+ return 0;
+
+ spin_lock_irqsave(&epc->lock, flags);
+ interrupt = epc->ops->get_msix(epc, func_no);
+ spin_unlock_irqrestore(&epc->lock, flags);
+
+ if (interrupt < 0)
+ return 0;
+
+ return interrupt + 1;
+}
+EXPORT_SYMBOL_GPL(pci_epc_get_msix);
+
+/**
+ * pci_epc_set_msix() - set the number of MSI-X interrupt numbers required
+ * @epc: the EPC device on which MSI-X has to be configured
+ * @func_no: the endpoint function number in the EPC device
+ * @interrupts: number of MSI-X interrupts required by the EPF
+ *
+ * Invoke to set the required number of MSI-X interrupts.
+ */
+int pci_epc_set_msix(struct pci_epc *epc, u8 func_no, u16 interrupts)
+{
+ int ret;
+ unsigned long flags;
+
+ if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions ||
+ interrupts < 1 || interrupts > 2048)
+ return -EINVAL;
+
+ if (!epc->ops->set_msix)
+ return 0;
+
+ spin_lock_irqsave(&epc->lock, flags);
+ ret = epc->ops->set_msix(epc, func_no, interrupts - 1);
+ spin_unlock_irqrestore(&epc->lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_set_msix);
+
+/**
* pci_epc_unmap_addr() - unmap CPU address from PCI address
* @epc: the EPC device on which address is allocated
* @func_no: the endpoint function number in the EPC device
diff --git a/drivers/pci/endpoint/pci-epf-core.c b/drivers/pci/endpoint/pci-epf-core.c
index 523a8ca..825fa24 100644
--- a/drivers/pci/endpoint/pci-epf-core.c
+++ b/drivers/pci/endpoint/pci-epf-core.c
@@ -137,6 +137,20 @@
}
EXPORT_SYMBOL_GPL(pci_epf_alloc_space);
+static void pci_epf_remove_cfs(struct pci_epf_driver *driver)
+{
+ struct config_group *group, *tmp;
+
+ if (!IS_ENABLED(CONFIG_PCI_ENDPOINT_CONFIGFS))
+ return;
+
+ mutex_lock(&pci_epf_mutex);
+ list_for_each_entry_safe(group, tmp, &driver->epf_group, group_entry)
+ pci_ep_cfs_remove_epf_group(group);
+ list_del(&driver->epf_group);
+ mutex_unlock(&pci_epf_mutex);
+}
+
/**
* pci_epf_unregister_driver() - unregister the PCI EPF driver
* @driver: the PCI EPF driver that has to be unregistered
@@ -145,17 +159,38 @@
*/
void pci_epf_unregister_driver(struct pci_epf_driver *driver)
{
- struct config_group *group;
-
- mutex_lock(&pci_epf_mutex);
- list_for_each_entry(group, &driver->epf_group, group_entry)
- pci_ep_cfs_remove_epf_group(group);
- list_del(&driver->epf_group);
- mutex_unlock(&pci_epf_mutex);
+ pci_epf_remove_cfs(driver);
driver_unregister(&driver->driver);
}
EXPORT_SYMBOL_GPL(pci_epf_unregister_driver);
+static int pci_epf_add_cfs(struct pci_epf_driver *driver)
+{
+ struct config_group *group;
+ const struct pci_epf_device_id *id;
+
+ if (!IS_ENABLED(CONFIG_PCI_ENDPOINT_CONFIGFS))
+ return 0;
+
+ INIT_LIST_HEAD(&driver->epf_group);
+
+ id = driver->id_table;
+ while (id->name[0]) {
+ group = pci_ep_cfs_add_epf_group(id->name);
+ if (IS_ERR(group)) {
+ pci_epf_remove_cfs(driver);
+ return PTR_ERR(group);
+ }
+
+ mutex_lock(&pci_epf_mutex);
+ list_add_tail(&group->group_entry, &driver->epf_group);
+ mutex_unlock(&pci_epf_mutex);
+ id++;
+ }
+
+ return 0;
+}
+
/**
* __pci_epf_register_driver() - register a new PCI EPF driver
* @driver: structure representing PCI EPF driver
@@ -167,8 +202,6 @@
struct module *owner)
{
int ret;
- struct config_group *group;
- const struct pci_epf_device_id *id;
if (!driver->ops)
return -EINVAL;
@@ -183,16 +216,7 @@
if (ret)
return ret;
- INIT_LIST_HEAD(&driver->epf_group);
-
- id = driver->id_table;
- while (id->name[0]) {
- group = pci_ep_cfs_add_epf_group(id->name);
- mutex_lock(&pci_epf_mutex);
- list_add_tail(&group->group_entry, &driver->epf_group);
- mutex_unlock(&pci_epf_mutex);
- id++;
- }
+ pci_epf_add_cfs(driver);
return 0;
}
diff --git a/drivers/pci/hotplug/acpi_pcihp.c b/drivers/pci/hotplug/acpi_pcihp.c
index 3979f89..6b7c1ed 100644
--- a/drivers/pci/hotplug/acpi_pcihp.c
+++ b/drivers/pci/hotplug/acpi_pcihp.c
@@ -7,7 +7,6 @@
* All rights reserved.
*
* Send feedback to <kristen.c.accardi@intel.com>
- *
*/
#include <linux/module.h>
@@ -75,23 +74,34 @@
struct acpi_buffer string = { ACPI_ALLOCATE_BUFFER, NULL };
/*
- * Per PCI firmware specification, we should run the ACPI _OSC
- * method to get control of hotplug hardware before using it. If
- * an _OSC is missing, we look for an OSHP to do the same thing.
- * To handle different BIOS behavior, we look for _OSC on a root
- * bridge preferentially (according to PCI fw spec). Later for
- * OSHP within the scope of the hotplug controller and its parents,
- * up to the host bridge under which this controller exists.
+ * If there's no ACPI host bridge (i.e., ACPI support is compiled
+ * into the kernel but the hardware platform doesn't support ACPI),
+ * there's nothing to do here.
*/
- if (shpchp_is_native(pdev))
- return 0;
-
- /* If _OSC exists, we should not evaluate OSHP */
host = pci_find_host_bridge(pdev->bus);
root = acpi_pci_find_root(ACPI_HANDLE(&host->dev));
- if (root->osc_support_set)
- goto no_control;
+ if (!root)
+ return 0;
+ /*
+ * If _OSC exists, it determines whether we're allowed to manage
+ * the SHPC. We executed it while enumerating the host bridge.
+ */
+ if (root->osc_support_set) {
+ if (host->native_shpc_hotplug)
+ return 0;
+ return -ENODEV;
+ }
+
+ /*
+ * In the absence of _OSC, we're always allowed to manage the SHPC.
+ * However, if an OSHP method is present, we must execute it so the
+ * firmware can transfer control to the OS, e.g., direct interrupts
+ * to the OS instead of to the firmware.
+ *
+ * N.B. The PCI Firmware Spec (r3.2, sec 4.8) does not endorse
+ * searching up the ACPI hierarchy, so the loops below are suspect.
+ */
handle = ACPI_HANDLE(&pdev->dev);
if (!handle) {
/*
@@ -120,7 +130,7 @@
if (ACPI_FAILURE(status))
break;
}
-no_control:
+
pci_info(pdev, "Cannot get control of SHPC hotplug\n");
kfree(string.pointer);
return -ENODEV;
diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c
index 12b5655..ad32ffb 100644
--- a/drivers/pci/hotplug/acpiphp_core.c
+++ b/drivers/pci/hotplug/acpiphp_core.c
@@ -254,20 +254,6 @@
return 0;
}
-/**
- * release_slot - free up the memory used by a slot
- * @hotplug_slot: slot to free
- */
-static void release_slot(struct hotplug_slot *hotplug_slot)
-{
- struct slot *slot = hotplug_slot->private;
-
- pr_debug("%s - physical_slot = %s\n", __func__, slot_name(slot));
-
- kfree(slot->hotplug_slot);
- kfree(slot);
-}
-
/* callback routine to initialize 'struct slot' for each slot */
int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot,
unsigned int sun)
@@ -287,7 +273,6 @@
slot->hotplug_slot->info = &slot->info;
slot->hotplug_slot->private = slot;
- slot->hotplug_slot->release = &release_slot;
slot->hotplug_slot->ops = &acpi_hotplug_slot_ops;
slot->acpi_slot = acpiphp_slot;
@@ -324,13 +309,12 @@
void acpiphp_unregister_hotplug_slot(struct acpiphp_slot *acpiphp_slot)
{
struct slot *slot = acpiphp_slot->slot;
- int retval = 0;
pr_info("Slot [%s] unregistered\n", slot_name(slot));
- retval = pci_hp_deregister(slot->hotplug_slot);
- if (retval)
- pr_err("pci_hp_deregister failed with error %d\n", retval);
+ pci_hp_deregister(slot->hotplug_slot);
+ kfree(slot->hotplug_slot);
+ kfree(slot);
}
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 3a17b29..ef0b1b6 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -509,7 +509,7 @@
list_for_each_entry(dev, &bus->devices, bus_list) {
/* Assume that newly added devices are powered on already. */
- if (!dev->is_added)
+ if (!pci_dev_is_added(dev))
dev->current_state = PCI_D0;
}
diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c
index 07b533a..52a339b 100644
--- a/drivers/pci/hotplug/cpci_hotplug_core.c
+++ b/drivers/pci/hotplug/cpci_hotplug_core.c
@@ -195,10 +195,8 @@
return 0;
}
-static void release_slot(struct hotplug_slot *hotplug_slot)
+static void release_slot(struct slot *slot)
{
- struct slot *slot = hotplug_slot->private;
-
kfree(slot->hotplug_slot->info);
kfree(slot->hotplug_slot);
pci_dev_put(slot->dev);
@@ -253,7 +251,6 @@
snprintf(name, SLOT_NAME_SIZE, "%02x:%02x", bus->number, i);
hotplug_slot->private = slot;
- hotplug_slot->release = &release_slot;
hotplug_slot->ops = &cpci_hotplug_slot_ops;
/*
@@ -308,12 +305,8 @@
slots--;
dbg("deregistering slot %s", slot_name(slot));
- status = pci_hp_deregister(slot->hotplug_slot);
- if (status) {
- err("pci_hp_deregister failed with error %d",
- status);
- break;
- }
+ pci_hp_deregister(slot->hotplug_slot);
+ release_slot(slot);
}
}
up_write(&list_rwsem);
@@ -623,6 +616,7 @@
list_for_each_entry_safe(slot, tmp, &slot_list, slot_list) {
list_del(&slot->slot_list);
pci_hp_deregister(slot->hotplug_slot);
+ release_slot(slot);
}
cleanup_null:
up_write(&list_rwsem);
diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index 1797e36..5a06636 100644
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -266,17 +266,6 @@
return previous;
}
-static void release_slot(struct hotplug_slot *hotplug_slot)
-{
- struct slot *slot = hotplug_slot->private;
-
- dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
-
- kfree(slot->hotplug_slot->info);
- kfree(slot->hotplug_slot);
- kfree(slot);
-}
-
static int ctrl_slot_cleanup(struct controller *ctrl)
{
struct slot *old_slot, *next_slot;
@@ -285,9 +274,11 @@
ctrl->slot = NULL;
while (old_slot) {
- /* memory will be freed by the release_slot callback */
next_slot = old_slot->next;
pci_hp_deregister(old_slot->hotplug_slot);
+ kfree(old_slot->hotplug_slot->info);
+ kfree(old_slot->hotplug_slot);
+ kfree(old_slot);
old_slot = next_slot;
}
@@ -678,7 +669,6 @@
((read_slot_enable(ctrl) << 2) >> ctrl_slot) & 0x04;
/* register this slot with the hotplug pci core */
- hotplug_slot->release = &release_slot;
hotplug_slot->private = slot;
snprintf(name, SLOT_NAME_SIZE, "%u", slot->number);
hotplug_slot->ops = &cpqphp_hotplug_slot_ops;
diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c
index 1869b04..4ea57e9 100644
--- a/drivers/pci/hotplug/ibmphp_core.c
+++ b/drivers/pci/hotplug/ibmphp_core.c
@@ -673,7 +673,20 @@
list_for_each_entry_safe(slot_cur, next, &ibmphp_slot_head,
ibm_slot_list) {
- pci_hp_deregister(slot_cur->hotplug_slot);
+ pci_hp_del(slot_cur->hotplug_slot);
+ slot_cur->ctrl = NULL;
+ slot_cur->bus_on = NULL;
+
+ /*
+ * We don't want to actually remove the resources,
+ * since ibmphp_free_resources() will do just that.
+ */
+ ibmphp_unconfigure_card(&slot_cur, -1);
+
+ pci_hp_destroy(slot_cur->hotplug_slot);
+ kfree(slot_cur->hotplug_slot->info);
+ kfree(slot_cur->hotplug_slot);
+ kfree(slot_cur);
}
debug("%s -- exit\n", __func__);
}
diff --git a/drivers/pci/hotplug/ibmphp_ebda.c b/drivers/pci/hotplug/ibmphp_ebda.c
index 64549aa..6f8e90e 100644
--- a/drivers/pci/hotplug/ibmphp_ebda.c
+++ b/drivers/pci/hotplug/ibmphp_ebda.c
@@ -699,25 +699,6 @@
return rc;
}
-static void release_slot(struct hotplug_slot *hotplug_slot)
-{
- struct slot *slot;
-
- if (!hotplug_slot || !hotplug_slot->private)
- return;
-
- slot = hotplug_slot->private;
- kfree(slot->hotplug_slot->info);
- kfree(slot->hotplug_slot);
- slot->ctrl = NULL;
- slot->bus_on = NULL;
-
- /* we don't want to actually remove the resources, since free_resources will do just that */
- ibmphp_unconfigure_card(&slot, -1);
-
- kfree(slot);
-}
-
static struct pci_driver ibmphp_driver;
/*
@@ -941,7 +922,6 @@
tmp_slot->hotplug_slot = hp_slot_ptr;
hp_slot_ptr->private = tmp_slot;
- hp_slot_ptr->release = release_slot;
rc = fillslotinfo(hp_slot_ptr);
if (rc)
diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c
index af92fed..90fde5f 100644
--- a/drivers/pci/hotplug/pci_hotplug_core.c
+++ b/drivers/pci/hotplug/pci_hotplug_core.c
@@ -396,8 +396,9 @@
* @owner: caller module owner
* @mod_name: caller module name
*
- * Registers a hotplug slot with the pci hotplug subsystem, which will allow
- * userspace interaction to the slot.
+ * Prepares a hotplug slot for in-kernel use and immediately publishes it to
+ * user space in one go. Drivers may alternatively carry out the two steps
+ * separately by invoking pci_hp_initialize() and pci_hp_add().
*
* Returns 0 if successful, anything else for an error.
*/
@@ -406,45 +407,91 @@
struct module *owner, const char *mod_name)
{
int result;
+
+ result = __pci_hp_initialize(slot, bus, devnr, name, owner, mod_name);
+ if (result)
+ return result;
+
+ result = pci_hp_add(slot);
+ if (result)
+ pci_hp_destroy(slot);
+
+ return result;
+}
+EXPORT_SYMBOL_GPL(__pci_hp_register);
+
+/**
+ * __pci_hp_initialize - prepare hotplug slot for in-kernel use
+ * @slot: pointer to the &struct hotplug_slot to initialize
+ * @bus: bus this slot is on
+ * @devnr: slot number
+ * @name: name registered with kobject core
+ * @owner: caller module owner
+ * @mod_name: caller module name
+ *
+ * Allocate and fill in a PCI slot for use by a hotplug driver. Once this has
+ * been called, the driver may invoke hotplug_slot_name() to get the slot's
+ * unique name. The driver must be prepared to handle a ->reset_slot callback
+ * from this point on.
+ *
+ * Returns 0 on success or a negative int on error.
+ */
+int __pci_hp_initialize(struct hotplug_slot *slot, struct pci_bus *bus,
+ int devnr, const char *name, struct module *owner,
+ const char *mod_name)
+{
struct pci_slot *pci_slot;
if (slot == NULL)
return -ENODEV;
if ((slot->info == NULL) || (slot->ops == NULL))
return -EINVAL;
- if (slot->release == NULL) {
- dbg("Why are you trying to register a hotplug slot without a proper release function?\n");
- return -EINVAL;
- }
slot->ops->owner = owner;
slot->ops->mod_name = mod_name;
- mutex_lock(&pci_hp_mutex);
/*
* No problems if we call this interface from both ACPI_PCI_SLOT
* driver and call it here again. If we've already created the
* pci_slot, the interface will simply bump the refcount.
*/
pci_slot = pci_create_slot(bus, devnr, name, slot);
- if (IS_ERR(pci_slot)) {
- result = PTR_ERR(pci_slot);
- goto out;
- }
+ if (IS_ERR(pci_slot))
+ return PTR_ERR(pci_slot);
slot->pci_slot = pci_slot;
pci_slot->hotplug = slot;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(__pci_hp_initialize);
- list_add(&slot->slot_list, &pci_hotplug_slot_list);
+/**
+ * pci_hp_add - publish hotplug slot to user space
+ * @slot: pointer to the &struct hotplug_slot to publish
+ *
+ * Make a hotplug slot's sysfs interface available and inform user space of its
+ * addition by sending a uevent. The hotplug driver must be prepared to handle
+ * all &struct hotplug_slot_ops callbacks from this point on.
+ *
+ * Returns 0 on success or a negative int on error.
+ */
+int pci_hp_add(struct hotplug_slot *slot)
+{
+ struct pci_slot *pci_slot = slot->pci_slot;
+ int result;
result = fs_add_slot(pci_slot);
+ if (result)
+ return result;
+
kobject_uevent(&pci_slot->kobj, KOBJ_ADD);
- dbg("Added slot %s to the list\n", name);
-out:
+ mutex_lock(&pci_hp_mutex);
+ list_add(&slot->slot_list, &pci_hotplug_slot_list);
mutex_unlock(&pci_hp_mutex);
- return result;
+ dbg("Added slot %s to the list\n", hotplug_slot_name(slot));
+ return 0;
}
-EXPORT_SYMBOL_GPL(__pci_hp_register);
+EXPORT_SYMBOL_GPL(pci_hp_add);
/**
* pci_hp_deregister - deregister a hotplug_slot with the PCI hotplug subsystem
@@ -455,35 +502,62 @@
*
* Returns 0 if successful, anything else for an error.
*/
-int pci_hp_deregister(struct hotplug_slot *slot)
+void pci_hp_deregister(struct hotplug_slot *slot)
+{
+ pci_hp_del(slot);
+ pci_hp_destroy(slot);
+}
+EXPORT_SYMBOL_GPL(pci_hp_deregister);
+
+/**
+ * pci_hp_del - unpublish hotplug slot from user space
+ * @slot: pointer to the &struct hotplug_slot to unpublish
+ *
+ * Remove a hotplug slot's sysfs interface.
+ *
+ * Returns 0 on success or a negative int on error.
+ */
+void pci_hp_del(struct hotplug_slot *slot)
{
struct hotplug_slot *temp;
- struct pci_slot *pci_slot;
- if (!slot)
- return -ENODEV;
+ if (WARN_ON(!slot))
+ return;
mutex_lock(&pci_hp_mutex);
temp = get_slot_from_name(hotplug_slot_name(slot));
- if (temp != slot) {
+ if (WARN_ON(temp != slot)) {
mutex_unlock(&pci_hp_mutex);
- return -ENODEV;
+ return;
}
list_del(&slot->slot_list);
-
- pci_slot = slot->pci_slot;
- fs_remove_slot(pci_slot);
+ mutex_unlock(&pci_hp_mutex);
dbg("Removed slot %s from the list\n", hotplug_slot_name(slot));
+ fs_remove_slot(slot->pci_slot);
+}
+EXPORT_SYMBOL_GPL(pci_hp_del);
- slot->release(slot);
+/**
+ * pci_hp_destroy - remove hotplug slot from in-kernel use
+ * @slot: pointer to the &struct hotplug_slot to destroy
+ *
+ * Destroy a PCI slot used by a hotplug driver. Once this has been called,
+ * the driver may no longer invoke hotplug_slot_name() to get the slot's
+ * unique name. The driver no longer needs to handle a ->reset_slot callback
+ * from this point on.
+ *
+ * Returns 0 on success or a negative int on error.
+ */
+void pci_hp_destroy(struct hotplug_slot *slot)
+{
+ struct pci_slot *pci_slot = slot->pci_slot;
+
+ slot->pci_slot = NULL;
pci_slot->hotplug = NULL;
pci_destroy_slot(pci_slot);
- mutex_unlock(&pci_hp_mutex);
-
- return 0;
}
-EXPORT_SYMBOL_GPL(pci_hp_deregister);
+EXPORT_SYMBOL_GPL(pci_hp_destroy);
/**
* pci_hp_change_slot_info - changes the slot's information structure in the core
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index 5f89206..811cf83 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -21,6 +21,7 @@
#include <linux/delay.h>
#include <linux/sched/signal.h> /* signal_pending() */
#include <linux/mutex.h>
+#include <linux/rwsem.h>
#include <linux/workqueue.h>
#include "../pcie/portdrv.h"
@@ -57,49 +58,111 @@
dev_warn(&ctrl->pcie->device, format, ## arg)
#define SLOT_NAME_SIZE 10
+
+/**
+ * struct slot - PCIe hotplug slot
+ * @state: current state machine position
+ * @ctrl: pointer to the slot's controller structure
+ * @hotplug_slot: pointer to the structure registered with the PCI hotplug core
+ * @work: work item to turn the slot on or off after 5 seconds in response to
+ * an Attention Button press
+ * @lock: protects reads and writes of @state;
+ * protects scheduling, execution and cancellation of @work
+ */
struct slot {
u8 state;
struct controller *ctrl;
struct hotplug_slot *hotplug_slot;
- struct delayed_work work; /* work for button event */
+ struct delayed_work work;
struct mutex lock;
- struct mutex hotplug_lock;
- struct workqueue_struct *wq;
};
-struct event_info {
- u32 event_type;
- struct slot *p_slot;
- struct work_struct work;
-};
-
+/**
+ * struct controller - PCIe hotplug controller
+ * @ctrl_lock: serializes writes to the Slot Control register
+ * @pcie: pointer to the controller's PCIe port service device
+ * @reset_lock: prevents access to the Data Link Layer Link Active bit in the
+ * Link Status register and to the Presence Detect State bit in the Slot
+ * Status register during a slot reset which may cause them to flap
+ * @slot: pointer to the controller's slot structure
+ * @queue: wait queue to wake up on reception of a Command Completed event,
+ * used for synchronous writes to the Slot Control register
+ * @slot_cap: cached copy of the Slot Capabilities register
+ * @slot_ctrl: cached copy of the Slot Control register
+ * @poll_thread: thread to poll for slot events if no IRQ is available,
+ * enabled with pciehp_poll_mode module parameter
+ * @cmd_started: jiffies when the Slot Control register was last written;
+ * the next write is allowed 1 second later, absent a Command Completed
+ * interrupt (PCIe r4.0, sec 6.7.3.2)
+ * @cmd_busy: flag set on Slot Control register write, cleared by IRQ handler
+ * on reception of a Command Completed event
+ * @link_active_reporting: cached copy of Data Link Layer Link Active Reporting
+ * Capable bit in Link Capabilities register; if this bit is zero, the
+ * Data Link Layer Link Active bit in the Link Status register will never
+ * be set and the driver is thus confined to wait 1 second before assuming
+ * the link to a hotplugged device is up and accessing it
+ * @notification_enabled: whether the IRQ was requested successfully
+ * @power_fault_detected: whether a power fault was detected by the hardware
+ * that has not yet been cleared by the user
+ * @pending_events: used by the IRQ handler to save events retrieved from the
+ * Slot Status register for later consumption by the IRQ thread
+ * @request_result: result of last user request submitted to the IRQ thread
+ * @requester: wait queue to wake up on completion of user request,
+ * used for synchronous slot enable/disable request via sysfs
+ */
struct controller {
- struct mutex ctrl_lock; /* controller lock */
- struct pcie_device *pcie; /* PCI Express port service */
+ struct mutex ctrl_lock;
+ struct pcie_device *pcie;
+ struct rw_semaphore reset_lock;
struct slot *slot;
- wait_queue_head_t queue; /* sleep & wake process */
+ wait_queue_head_t queue;
u32 slot_cap;
u16 slot_ctrl;
- struct timer_list poll_timer;
+ struct task_struct *poll_thread;
unsigned long cmd_started; /* jiffies */
unsigned int cmd_busy:1;
unsigned int link_active_reporting:1;
unsigned int notification_enabled:1;
unsigned int power_fault_detected;
+ atomic_t pending_events;
+ int request_result;
+ wait_queue_head_t requester;
};
-#define INT_PRESENCE_ON 1
-#define INT_PRESENCE_OFF 2
-#define INT_POWER_FAULT 3
-#define INT_BUTTON_PRESS 4
-#define INT_LINK_UP 5
-#define INT_LINK_DOWN 6
-
-#define STATIC_STATE 0
+/**
+ * DOC: Slot state
+ *
+ * @OFF_STATE: slot is powered off, no subordinate devices are enumerated
+ * @BLINKINGON_STATE: slot will be powered on after the 5 second delay,
+ * green led is blinking
+ * @BLINKINGOFF_STATE: slot will be powered off after the 5 second delay,
+ * green led is blinking
+ * @POWERON_STATE: slot is currently powering on
+ * @POWEROFF_STATE: slot is currently powering off
+ * @ON_STATE: slot is powered on, subordinate devices have been enumerated
+ */
+#define OFF_STATE 0
#define BLINKINGON_STATE 1
#define BLINKINGOFF_STATE 2
#define POWERON_STATE 3
#define POWEROFF_STATE 4
+#define ON_STATE 5
+
+/**
+ * DOC: Flags to request an action from the IRQ thread
+ *
+ * These are stored together with events read from the Slot Status register,
+ * hence must be greater than its 16-bit width.
+ *
+ * %DISABLE_SLOT: Disable the slot in response to a user request via sysfs or
+ * an Attention Button press after the 5 second delay
+ * %RERUN_ISR: Used by the IRQ handler to inform the IRQ thread that the
+ * hotplug port was inaccessible when the interrupt occurred, requiring
+ * that the IRQ handler is rerun by the IRQ thread after it has made the
+ * hotplug port accessible by runtime resuming its parents to D0
+ */
+#define DISABLE_SLOT (1 << 16)
+#define RERUN_ISR (1 << 17)
#define ATTN_BUTTN(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_ABP)
#define POWER_CTRL(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_PCP)
@@ -113,15 +176,17 @@
int pciehp_sysfs_enable_slot(struct slot *slot);
int pciehp_sysfs_disable_slot(struct slot *slot);
-void pciehp_queue_interrupt_event(struct slot *slot, u32 event_type);
+void pciehp_request(struct controller *ctrl, int action);
+void pciehp_handle_button_press(struct slot *slot);
+void pciehp_handle_disable_request(struct slot *slot);
+void pciehp_handle_presence_or_link_change(struct slot *slot, u32 events);
int pciehp_configure_device(struct slot *p_slot);
-int pciehp_unconfigure_device(struct slot *p_slot);
+void pciehp_unconfigure_device(struct slot *p_slot);
void pciehp_queue_pushbutton_work(struct work_struct *work);
struct controller *pcie_init(struct pcie_device *dev);
int pcie_init_notification(struct controller *ctrl);
-int pciehp_enable_slot(struct slot *p_slot);
-int pciehp_disable_slot(struct slot *p_slot);
-void pcie_reenable_notification(struct controller *ctrl);
+void pcie_shutdown_notification(struct controller *ctrl);
+void pcie_clear_hotplug_events(struct controller *ctrl);
int pciehp_power_on_slot(struct slot *slot);
void pciehp_power_off_slot(struct slot *slot);
void pciehp_get_power_status(struct slot *slot, u8 *status);
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 44a6a63..ec48c943 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -26,11 +26,12 @@
#include <linux/interrupt.h>
#include <linux/time.h>
+#include "../pci.h"
+
/* Global variables */
bool pciehp_debug;
bool pciehp_poll_mode;
int pciehp_poll_time;
-static bool pciehp_force;
/*
* not really modular, but the easiest way to keep compat with existing
@@ -39,11 +40,9 @@
module_param(pciehp_debug, bool, 0644);
module_param(pciehp_poll_mode, bool, 0644);
module_param(pciehp_poll_time, int, 0644);
-module_param(pciehp_force, bool, 0644);
MODULE_PARM_DESC(pciehp_debug, "Debugging mode enabled or not");
MODULE_PARM_DESC(pciehp_poll_mode, "Using polling mechanism for hot-plug events or not");
MODULE_PARM_DESC(pciehp_poll_time, "Polling mechanism frequency, in seconds");
-MODULE_PARM_DESC(pciehp_force, "Force pciehp, even if OSHP is missing");
#define PCIE_MODULE_NAME "pciehp"
@@ -56,17 +55,6 @@
static int get_adapter_status(struct hotplug_slot *slot, u8 *value);
static int reset_slot(struct hotplug_slot *slot, int probe);
-/**
- * release_slot - free up the memory used by a slot
- * @hotplug_slot: slot to free
- */
-static void release_slot(struct hotplug_slot *hotplug_slot)
-{
- kfree(hotplug_slot->ops);
- kfree(hotplug_slot->info);
- kfree(hotplug_slot);
-}
-
static int init_slot(struct controller *ctrl)
{
struct slot *slot = ctrl->slot;
@@ -107,15 +95,14 @@
/* register this slot with the hotplug pci core */
hotplug->info = info;
hotplug->private = slot;
- hotplug->release = &release_slot;
hotplug->ops = ops;
slot->hotplug_slot = hotplug;
snprintf(name, SLOT_NAME_SIZE, "%u", PSN(ctrl));
- retval = pci_hp_register(hotplug,
- ctrl->pcie->port->subordinate, 0, name);
+ retval = pci_hp_initialize(hotplug,
+ ctrl->pcie->port->subordinate, 0, name);
if (retval)
- ctrl_err(ctrl, "pci_hp_register failed: error %d\n", retval);
+ ctrl_err(ctrl, "pci_hp_initialize failed: error %d\n", retval);
out:
if (retval) {
kfree(ops);
@@ -127,7 +114,12 @@
static void cleanup_slot(struct controller *ctrl)
{
- pci_hp_deregister(ctrl->slot->hotplug_slot);
+ struct hotplug_slot *hotplug_slot = ctrl->slot->hotplug_slot;
+
+ pci_hp_destroy(hotplug_slot);
+ kfree(hotplug_slot->ops);
+ kfree(hotplug_slot->info);
+ kfree(hotplug_slot);
}
/*
@@ -136,8 +128,11 @@
static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 status)
{
struct slot *slot = hotplug_slot->private;
+ struct pci_dev *pdev = slot->ctrl->pcie->port;
+ pci_config_pm_runtime_get(pdev);
pciehp_set_attention_status(slot, status);
+ pci_config_pm_runtime_put(pdev);
return 0;
}
@@ -160,8 +155,11 @@
static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value)
{
struct slot *slot = hotplug_slot->private;
+ struct pci_dev *pdev = slot->ctrl->pcie->port;
+ pci_config_pm_runtime_get(pdev);
pciehp_get_power_status(slot, value);
+ pci_config_pm_runtime_put(pdev);
return 0;
}
@@ -176,16 +174,22 @@
static int get_latch_status(struct hotplug_slot *hotplug_slot, u8 *value)
{
struct slot *slot = hotplug_slot->private;
+ struct pci_dev *pdev = slot->ctrl->pcie->port;
+ pci_config_pm_runtime_get(pdev);
pciehp_get_latch_status(slot, value);
+ pci_config_pm_runtime_put(pdev);
return 0;
}
static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value)
{
struct slot *slot = hotplug_slot->private;
+ struct pci_dev *pdev = slot->ctrl->pcie->port;
+ pci_config_pm_runtime_get(pdev);
pciehp_get_adapter_status(slot, value);
+ pci_config_pm_runtime_put(pdev);
return 0;
}
@@ -196,12 +200,40 @@
return pciehp_reset_slot(slot, probe);
}
+/**
+ * pciehp_check_presence() - synthesize event if presence has changed
+ *
+ * On probe and resume, an explicit presence check is necessary to bring up an
+ * occupied slot or bring down an unoccupied slot. This can't be triggered by
+ * events in the Slot Status register, they may be stale and are therefore
+ * cleared. Secondly, sending an interrupt for "events that occur while
+ * interrupt generation is disabled [when] interrupt generation is subsequently
+ * enabled" is optional per PCIe r4.0, sec 6.7.3.4.
+ */
+static void pciehp_check_presence(struct controller *ctrl)
+{
+ struct slot *slot = ctrl->slot;
+ u8 occupied;
+
+ down_read(&ctrl->reset_lock);
+ mutex_lock(&slot->lock);
+
+ pciehp_get_adapter_status(slot, &occupied);
+ if ((occupied && (slot->state == OFF_STATE ||
+ slot->state == BLINKINGON_STATE)) ||
+ (!occupied && (slot->state == ON_STATE ||
+ slot->state == BLINKINGOFF_STATE)))
+ pciehp_request(ctrl, PCI_EXP_SLTSTA_PDC);
+
+ mutex_unlock(&slot->lock);
+ up_read(&ctrl->reset_lock);
+}
+
static int pciehp_probe(struct pcie_device *dev)
{
int rc;
struct controller *ctrl;
struct slot *slot;
- u8 occupied, poweron;
/* If this is not a "hotplug" service, we have no business here. */
if (dev->service != PCIE_PORT_SERVICE_HP)
@@ -238,21 +270,20 @@
goto err_out_free_ctrl_slot;
}
- /* Check if slot is occupied */
+ /* Publish to user space */
slot = ctrl->slot;
- pciehp_get_adapter_status(slot, &occupied);
- pciehp_get_power_status(slot, &poweron);
- if (occupied && pciehp_force) {
- mutex_lock(&slot->hotplug_lock);
- pciehp_enable_slot(slot);
- mutex_unlock(&slot->hotplug_lock);
+ rc = pci_hp_add(slot->hotplug_slot);
+ if (rc) {
+ ctrl_err(ctrl, "Publication to user space failed (%d)\n", rc);
+ goto err_out_shutdown_notification;
}
- /* If empty slot's power status is on, turn power off */
- if (!occupied && poweron && POWER_CTRL(ctrl))
- pciehp_power_off_slot(slot);
+
+ pciehp_check_presence(ctrl);
return 0;
+err_out_shutdown_notification:
+ pcie_shutdown_notification(ctrl);
err_out_free_ctrl_slot:
cleanup_slot(ctrl);
err_out_release_ctlr:
@@ -264,6 +295,8 @@
{
struct controller *ctrl = get_service_data(dev);
+ pci_hp_del(ctrl->slot->hotplug_slot);
+ pcie_shutdown_notification(ctrl);
cleanup_slot(ctrl);
pciehp_release_ctrl(ctrl);
}
@@ -274,27 +307,28 @@
return 0;
}
+static int pciehp_resume_noirq(struct pcie_device *dev)
+{
+ struct controller *ctrl = get_service_data(dev);
+ struct slot *slot = ctrl->slot;
+
+ /* pci_restore_state() just wrote to the Slot Control register */
+ ctrl->cmd_started = jiffies;
+ ctrl->cmd_busy = true;
+
+ /* clear spurious events from rediscovery of inserted card */
+ if (slot->state == ON_STATE || slot->state == BLINKINGOFF_STATE)
+ pcie_clear_hotplug_events(ctrl);
+
+ return 0;
+}
+
static int pciehp_resume(struct pcie_device *dev)
{
- struct controller *ctrl;
- struct slot *slot;
- u8 status;
+ struct controller *ctrl = get_service_data(dev);
- ctrl = get_service_data(dev);
+ pciehp_check_presence(ctrl);
- /* reinitialize the chipset's event detection logic */
- pcie_reenable_notification(ctrl);
-
- slot = ctrl->slot;
-
- /* Check if slot is occupied */
- pciehp_get_adapter_status(slot, &status);
- mutex_lock(&slot->hotplug_lock);
- if (status)
- pciehp_enable_slot(slot);
- else
- pciehp_disable_slot(slot);
- mutex_unlock(&slot->hotplug_lock);
return 0;
}
#endif /* PM */
@@ -309,6 +343,7 @@
#ifdef CONFIG_PM
.suspend = pciehp_suspend,
+ .resume_noirq = pciehp_resume_noirq,
.resume = pciehp_resume,
#endif /* PM */
};
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index c684faa..da7c723 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -17,28 +17,11 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/slab.h>
+#include <linux/pm_runtime.h>
#include <linux/pci.h>
#include "../pci.h"
#include "pciehp.h"
-static void interrupt_event_handler(struct work_struct *work);
-
-void pciehp_queue_interrupt_event(struct slot *p_slot, u32 event_type)
-{
- struct event_info *info;
-
- info = kmalloc(sizeof(*info), GFP_ATOMIC);
- if (!info) {
- ctrl_err(p_slot->ctrl, "dropped event %d (ENOMEM)\n", event_type);
- return;
- }
-
- INIT_WORK(&info->work, interrupt_event_handler);
- info->event_type = event_type;
- info->p_slot = p_slot;
- queue_work(p_slot->wq, &info->work);
-}
-
/* The following routines constitute the bulk of the
hotplug controller logic
*/
@@ -119,14 +102,11 @@
* remove_board - Turns off slot and LEDs
* @p_slot: slot where board is being removed
*/
-static int remove_board(struct slot *p_slot)
+static void remove_board(struct slot *p_slot)
{
- int retval;
struct controller *ctrl = p_slot->ctrl;
- retval = pciehp_unconfigure_device(p_slot);
- if (retval)
- return retval;
+ pciehp_unconfigure_device(p_slot);
if (POWER_CTRL(ctrl)) {
pciehp_power_off_slot(p_slot);
@@ -141,86 +121,30 @@
/* turn off Green LED */
pciehp_green_led_off(p_slot);
- return 0;
}
-struct power_work_info {
- struct slot *p_slot;
- struct work_struct work;
- unsigned int req;
-#define DISABLE_REQ 0
-#define ENABLE_REQ 1
-};
+static int pciehp_enable_slot(struct slot *slot);
+static int pciehp_disable_slot(struct slot *slot);
-/**
- * pciehp_power_thread - handle pushbutton events
- * @work: &struct work_struct describing work to be done
- *
- * Scheduled procedure to handle blocking stuff for the pushbuttons.
- * Handles all pending events and exits.
- */
-static void pciehp_power_thread(struct work_struct *work)
+void pciehp_request(struct controller *ctrl, int action)
{
- struct power_work_info *info =
- container_of(work, struct power_work_info, work);
- struct slot *p_slot = info->p_slot;
- int ret;
-
- switch (info->req) {
- case DISABLE_REQ:
- mutex_lock(&p_slot->hotplug_lock);
- pciehp_disable_slot(p_slot);
- mutex_unlock(&p_slot->hotplug_lock);
- mutex_lock(&p_slot->lock);
- p_slot->state = STATIC_STATE;
- mutex_unlock(&p_slot->lock);
- break;
- case ENABLE_REQ:
- mutex_lock(&p_slot->hotplug_lock);
- ret = pciehp_enable_slot(p_slot);
- mutex_unlock(&p_slot->hotplug_lock);
- if (ret)
- pciehp_green_led_off(p_slot);
- mutex_lock(&p_slot->lock);
- p_slot->state = STATIC_STATE;
- mutex_unlock(&p_slot->lock);
- break;
- default:
- break;
- }
-
- kfree(info);
-}
-
-static void pciehp_queue_power_work(struct slot *p_slot, int req)
-{
- struct power_work_info *info;
-
- p_slot->state = (req == ENABLE_REQ) ? POWERON_STATE : POWEROFF_STATE;
-
- info = kmalloc(sizeof(*info), GFP_KERNEL);
- if (!info) {
- ctrl_err(p_slot->ctrl, "no memory to queue %s request\n",
- (req == ENABLE_REQ) ? "poweron" : "poweroff");
- return;
- }
- info->p_slot = p_slot;
- INIT_WORK(&info->work, pciehp_power_thread);
- info->req = req;
- queue_work(p_slot->wq, &info->work);
+ atomic_or(action, &ctrl->pending_events);
+ if (!pciehp_poll_mode)
+ irq_wake_thread(ctrl->pcie->irq, ctrl);
}
void pciehp_queue_pushbutton_work(struct work_struct *work)
{
struct slot *p_slot = container_of(work, struct slot, work.work);
+ struct controller *ctrl = p_slot->ctrl;
mutex_lock(&p_slot->lock);
switch (p_slot->state) {
case BLINKINGOFF_STATE:
- pciehp_queue_power_work(p_slot, DISABLE_REQ);
+ pciehp_request(ctrl, DISABLE_SLOT);
break;
case BLINKINGON_STATE:
- pciehp_queue_power_work(p_slot, ENABLE_REQ);
+ pciehp_request(ctrl, PCI_EXP_SLTSTA_PDC);
break;
default:
break;
@@ -228,18 +152,15 @@
mutex_unlock(&p_slot->lock);
}
-/*
- * Note: This function must be called with slot->lock held
- */
-static void handle_button_press_event(struct slot *p_slot)
+void pciehp_handle_button_press(struct slot *p_slot)
{
struct controller *ctrl = p_slot->ctrl;
- u8 getstatus;
+ mutex_lock(&p_slot->lock);
switch (p_slot->state) {
- case STATIC_STATE:
- pciehp_get_power_status(p_slot, &getstatus);
- if (getstatus) {
+ case OFF_STATE:
+ case ON_STATE:
+ if (p_slot->state == ON_STATE) {
p_slot->state = BLINKINGOFF_STATE;
ctrl_info(ctrl, "Slot(%s): Powering off due to button press\n",
slot_name(p_slot));
@@ -251,7 +172,7 @@
/* blink green LED and turn off amber */
pciehp_green_led_blink(p_slot);
pciehp_set_attention_status(p_slot, 0);
- queue_delayed_work(p_slot->wq, &p_slot->work, 5*HZ);
+ schedule_delayed_work(&p_slot->work, 5 * HZ);
break;
case BLINKINGOFF_STATE:
case BLINKINGON_STATE:
@@ -262,118 +183,104 @@
*/
ctrl_info(ctrl, "Slot(%s): Button cancel\n", slot_name(p_slot));
cancel_delayed_work(&p_slot->work);
- if (p_slot->state == BLINKINGOFF_STATE)
+ if (p_slot->state == BLINKINGOFF_STATE) {
+ p_slot->state = ON_STATE;
pciehp_green_led_on(p_slot);
- else
+ } else {
+ p_slot->state = OFF_STATE;
pciehp_green_led_off(p_slot);
+ }
pciehp_set_attention_status(p_slot, 0);
ctrl_info(ctrl, "Slot(%s): Action canceled due to button press\n",
slot_name(p_slot));
- p_slot->state = STATIC_STATE;
- break;
- case POWEROFF_STATE:
- case POWERON_STATE:
- /*
- * Ignore if the slot is on power-on or power-off state;
- * this means that the previous attention button action
- * to hot-add or hot-remove is undergoing
- */
- ctrl_info(ctrl, "Slot(%s): Button ignored\n",
- slot_name(p_slot));
break;
default:
ctrl_err(ctrl, "Slot(%s): Ignoring invalid state %#x\n",
slot_name(p_slot), p_slot->state);
break;
}
-}
-
-/*
- * Note: This function must be called with slot->lock held
- */
-static void handle_link_event(struct slot *p_slot, u32 event)
-{
- struct controller *ctrl = p_slot->ctrl;
-
- switch (p_slot->state) {
- case BLINKINGON_STATE:
- case BLINKINGOFF_STATE:
- cancel_delayed_work(&p_slot->work);
- /* Fall through */
- case STATIC_STATE:
- pciehp_queue_power_work(p_slot, event == INT_LINK_UP ?
- ENABLE_REQ : DISABLE_REQ);
- break;
- case POWERON_STATE:
- if (event == INT_LINK_UP) {
- ctrl_info(ctrl, "Slot(%s): Link Up event ignored; already powering on\n",
- slot_name(p_slot));
- } else {
- ctrl_info(ctrl, "Slot(%s): Link Down event queued; currently getting powered on\n",
- slot_name(p_slot));
- pciehp_queue_power_work(p_slot, DISABLE_REQ);
- }
- break;
- case POWEROFF_STATE:
- if (event == INT_LINK_UP) {
- ctrl_info(ctrl, "Slot(%s): Link Up event queued; currently getting powered off\n",
- slot_name(p_slot));
- pciehp_queue_power_work(p_slot, ENABLE_REQ);
- } else {
- ctrl_info(ctrl, "Slot(%s): Link Down event ignored; already powering off\n",
- slot_name(p_slot));
- }
- break;
- default:
- ctrl_err(ctrl, "Slot(%s): Ignoring invalid state %#x\n",
- slot_name(p_slot), p_slot->state);
- break;
- }
-}
-
-static void interrupt_event_handler(struct work_struct *work)
-{
- struct event_info *info = container_of(work, struct event_info, work);
- struct slot *p_slot = info->p_slot;
- struct controller *ctrl = p_slot->ctrl;
-
- mutex_lock(&p_slot->lock);
- switch (info->event_type) {
- case INT_BUTTON_PRESS:
- handle_button_press_event(p_slot);
- break;
- case INT_POWER_FAULT:
- if (!POWER_CTRL(ctrl))
- break;
- pciehp_set_attention_status(p_slot, 1);
- pciehp_green_led_off(p_slot);
- break;
- case INT_PRESENCE_ON:
- pciehp_queue_power_work(p_slot, ENABLE_REQ);
- break;
- case INT_PRESENCE_OFF:
- /*
- * Regardless of surprise capability, we need to
- * definitely remove a card that has been pulled out!
- */
- pciehp_queue_power_work(p_slot, DISABLE_REQ);
- break;
- case INT_LINK_UP:
- case INT_LINK_DOWN:
- handle_link_event(p_slot, info->event_type);
- break;
- default:
- break;
- }
mutex_unlock(&p_slot->lock);
-
- kfree(info);
}
-/*
- * Note: This function must be called with slot->hotplug_lock held
- */
-int pciehp_enable_slot(struct slot *p_slot)
+void pciehp_handle_disable_request(struct slot *slot)
+{
+ struct controller *ctrl = slot->ctrl;
+
+ mutex_lock(&slot->lock);
+ switch (slot->state) {
+ case BLINKINGON_STATE:
+ case BLINKINGOFF_STATE:
+ cancel_delayed_work(&slot->work);
+ break;
+ }
+ slot->state = POWEROFF_STATE;
+ mutex_unlock(&slot->lock);
+
+ ctrl->request_result = pciehp_disable_slot(slot);
+}
+
+void pciehp_handle_presence_or_link_change(struct slot *slot, u32 events)
+{
+ struct controller *ctrl = slot->ctrl;
+ bool link_active;
+ u8 present;
+
+ /*
+ * If the slot is on and presence or link has changed, turn it off.
+ * Even if it's occupied again, we cannot assume the card is the same.
+ */
+ mutex_lock(&slot->lock);
+ switch (slot->state) {
+ case BLINKINGOFF_STATE:
+ cancel_delayed_work(&slot->work);
+ /* fall through */
+ case ON_STATE:
+ slot->state = POWEROFF_STATE;
+ mutex_unlock(&slot->lock);
+ if (events & PCI_EXP_SLTSTA_DLLSC)
+ ctrl_info(ctrl, "Slot(%s): Link Down\n",
+ slot_name(slot));
+ if (events & PCI_EXP_SLTSTA_PDC)
+ ctrl_info(ctrl, "Slot(%s): Card not present\n",
+ slot_name(slot));
+ pciehp_disable_slot(slot);
+ break;
+ default:
+ mutex_unlock(&slot->lock);
+ break;
+ }
+
+ /* Turn the slot on if it's occupied or link is up */
+ mutex_lock(&slot->lock);
+ pciehp_get_adapter_status(slot, &present);
+ link_active = pciehp_check_link_active(ctrl);
+ if (!present && !link_active) {
+ mutex_unlock(&slot->lock);
+ return;
+ }
+
+ switch (slot->state) {
+ case BLINKINGON_STATE:
+ cancel_delayed_work(&slot->work);
+ /* fall through */
+ case OFF_STATE:
+ slot->state = POWERON_STATE;
+ mutex_unlock(&slot->lock);
+ if (present)
+ ctrl_info(ctrl, "Slot(%s): Card present\n",
+ slot_name(slot));
+ if (link_active)
+ ctrl_info(ctrl, "Slot(%s): Link Up\n",
+ slot_name(slot));
+ ctrl->request_result = pciehp_enable_slot(slot);
+ break;
+ default:
+ mutex_unlock(&slot->lock);
+ break;
+ }
+}
+
+static int __pciehp_enable_slot(struct slot *p_slot)
{
u8 getstatus = 0;
struct controller *ctrl = p_slot->ctrl;
@@ -404,17 +311,29 @@
return board_added(p_slot);
}
-/*
- * Note: This function must be called with slot->hotplug_lock held
- */
-int pciehp_disable_slot(struct slot *p_slot)
+static int pciehp_enable_slot(struct slot *slot)
+{
+ struct controller *ctrl = slot->ctrl;
+ int ret;
+
+ pm_runtime_get_sync(&ctrl->pcie->port->dev);
+ ret = __pciehp_enable_slot(slot);
+ if (ret && ATTN_BUTTN(ctrl))
+ pciehp_green_led_off(slot); /* may be blinking */
+ pm_runtime_put(&ctrl->pcie->port->dev);
+
+ mutex_lock(&slot->lock);
+ slot->state = ret ? OFF_STATE : ON_STATE;
+ mutex_unlock(&slot->lock);
+
+ return ret;
+}
+
+static int __pciehp_disable_slot(struct slot *p_slot)
{
u8 getstatus = 0;
struct controller *ctrl = p_slot->ctrl;
- if (!p_slot->ctrl)
- return 1;
-
if (POWER_CTRL(p_slot->ctrl)) {
pciehp_get_power_status(p_slot, &getstatus);
if (!getstatus) {
@@ -424,32 +343,50 @@
}
}
- return remove_board(p_slot);
+ remove_board(p_slot);
+ return 0;
+}
+
+static int pciehp_disable_slot(struct slot *slot)
+{
+ struct controller *ctrl = slot->ctrl;
+ int ret;
+
+ pm_runtime_get_sync(&ctrl->pcie->port->dev);
+ ret = __pciehp_disable_slot(slot);
+ pm_runtime_put(&ctrl->pcie->port->dev);
+
+ mutex_lock(&slot->lock);
+ slot->state = OFF_STATE;
+ mutex_unlock(&slot->lock);
+
+ return ret;
}
int pciehp_sysfs_enable_slot(struct slot *p_slot)
{
- int retval = -ENODEV;
struct controller *ctrl = p_slot->ctrl;
mutex_lock(&p_slot->lock);
switch (p_slot->state) {
case BLINKINGON_STATE:
- cancel_delayed_work(&p_slot->work);
- case STATIC_STATE:
- p_slot->state = POWERON_STATE;
+ case OFF_STATE:
mutex_unlock(&p_slot->lock);
- mutex_lock(&p_slot->hotplug_lock);
- retval = pciehp_enable_slot(p_slot);
- mutex_unlock(&p_slot->hotplug_lock);
- mutex_lock(&p_slot->lock);
- p_slot->state = STATIC_STATE;
- break;
+ /*
+ * The IRQ thread becomes a no-op if the user pulls out the
+ * card before the thread wakes up, so initialize to -ENODEV.
+ */
+ ctrl->request_result = -ENODEV;
+ pciehp_request(ctrl, PCI_EXP_SLTSTA_PDC);
+ wait_event(ctrl->requester,
+ !atomic_read(&ctrl->pending_events));
+ return ctrl->request_result;
case POWERON_STATE:
ctrl_info(ctrl, "Slot(%s): Already in powering on state\n",
slot_name(p_slot));
break;
case BLINKINGOFF_STATE:
+ case ON_STATE:
case POWEROFF_STATE:
ctrl_info(ctrl, "Slot(%s): Already enabled\n",
slot_name(p_slot));
@@ -461,32 +398,28 @@
}
mutex_unlock(&p_slot->lock);
- return retval;
+ return -ENODEV;
}
int pciehp_sysfs_disable_slot(struct slot *p_slot)
{
- int retval = -ENODEV;
struct controller *ctrl = p_slot->ctrl;
mutex_lock(&p_slot->lock);
switch (p_slot->state) {
case BLINKINGOFF_STATE:
- cancel_delayed_work(&p_slot->work);
- case STATIC_STATE:
- p_slot->state = POWEROFF_STATE;
+ case ON_STATE:
mutex_unlock(&p_slot->lock);
- mutex_lock(&p_slot->hotplug_lock);
- retval = pciehp_disable_slot(p_slot);
- mutex_unlock(&p_slot->hotplug_lock);
- mutex_lock(&p_slot->lock);
- p_slot->state = STATIC_STATE;
- break;
+ pciehp_request(ctrl, DISABLE_SLOT);
+ wait_event(ctrl->requester,
+ !atomic_read(&ctrl->pending_events));
+ return ctrl->request_result;
case POWEROFF_STATE:
ctrl_info(ctrl, "Slot(%s): Already in powering off state\n",
slot_name(p_slot));
break;
case BLINKINGON_STATE:
+ case OFF_STATE:
case POWERON_STATE:
ctrl_info(ctrl, "Slot(%s): Already disabled\n",
slot_name(p_slot));
@@ -498,5 +431,5 @@
}
mutex_unlock(&p_slot->lock);
- return retval;
+ return -ENODEV;
}
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 718b607..7136e34 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -17,8 +17,9 @@
#include <linux/types.h>
#include <linux/signal.h>
#include <linux/jiffies.h>
-#include <linux/timer.h>
+#include <linux/kthread.h>
#include <linux/pci.h>
+#include <linux/pm_runtime.h>
#include <linux/interrupt.h>
#include <linux/time.h>
#include <linux/slab.h>
@@ -31,47 +32,24 @@
return ctrl->pcie->port;
}
-static irqreturn_t pcie_isr(int irq, void *dev_id);
-static void start_int_poll_timer(struct controller *ctrl, int sec);
-
-/* This is the interrupt polling timeout function. */
-static void int_poll_timeout(struct timer_list *t)
-{
- struct controller *ctrl = from_timer(ctrl, t, poll_timer);
-
- /* Poll for interrupt events. regs == NULL => polling */
- pcie_isr(0, ctrl);
-
- if (!pciehp_poll_time)
- pciehp_poll_time = 2; /* default polling interval is 2 sec */
-
- start_int_poll_timer(ctrl, pciehp_poll_time);
-}
-
-/* This function starts the interrupt polling timer. */
-static void start_int_poll_timer(struct controller *ctrl, int sec)
-{
- /* Clamp to sane value */
- if ((sec <= 0) || (sec > 60))
- sec = 2;
-
- ctrl->poll_timer.expires = jiffies + sec * HZ;
- add_timer(&ctrl->poll_timer);
-}
+static irqreturn_t pciehp_isr(int irq, void *dev_id);
+static irqreturn_t pciehp_ist(int irq, void *dev_id);
+static int pciehp_poll(void *data);
static inline int pciehp_request_irq(struct controller *ctrl)
{
int retval, irq = ctrl->pcie->irq;
- /* Install interrupt polling timer. Start with 10 sec delay */
if (pciehp_poll_mode) {
- timer_setup(&ctrl->poll_timer, int_poll_timeout, 0);
- start_int_poll_timer(ctrl, 10);
- return 0;
+ ctrl->poll_thread = kthread_run(&pciehp_poll, ctrl,
+ "pciehp_poll-%s",
+ slot_name(ctrl->slot));
+ return PTR_ERR_OR_ZERO(ctrl->poll_thread);
}
/* Installs the interrupt handler */
- retval = request_irq(irq, pcie_isr, IRQF_SHARED, MY_NAME, ctrl);
+ retval = request_threaded_irq(irq, pciehp_isr, pciehp_ist,
+ IRQF_SHARED, MY_NAME, ctrl);
if (retval)
ctrl_err(ctrl, "Cannot get irq %d for the hotplug controller\n",
irq);
@@ -81,7 +59,7 @@
static inline void pciehp_free_irq(struct controller *ctrl)
{
if (pciehp_poll_mode)
- del_timer_sync(&ctrl->poll_timer);
+ kthread_stop(ctrl->poll_thread);
else
free_irq(ctrl->pcie->irq, ctrl);
}
@@ -293,6 +271,11 @@
found = pci_bus_check_dev(ctrl->pcie->port->subordinate,
PCI_DEVFN(0, 0));
+ /* ignore link or presence changes up to this point */
+ if (found)
+ atomic_and(~(PCI_EXP_SLTSTA_DLLSC | PCI_EXP_SLTSTA_PDC),
+ &ctrl->pending_events);
+
pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
ctrl_dbg(ctrl, "%s: lnk_status = %x\n", __func__, lnk_status);
if ((lnk_status & PCI_EXP_LNKSTA_LT) ||
@@ -339,7 +322,9 @@
struct pci_dev *pdev = ctrl_dev(slot->ctrl);
u16 slot_ctrl;
+ pci_config_pm_runtime_get(pdev);
pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl);
+ pci_config_pm_runtime_put(pdev);
*status = (slot_ctrl & (PCI_EXP_SLTCTL_AIC | PCI_EXP_SLTCTL_PIC)) >> 6;
return 0;
}
@@ -350,7 +335,9 @@
struct pci_dev *pdev = ctrl_dev(ctrl);
u16 slot_ctrl;
+ pci_config_pm_runtime_get(pdev);
pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl);
+ pci_config_pm_runtime_put(pdev);
ctrl_dbg(ctrl, "%s: SLOTCTRL %x, value read %x\n", __func__,
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_ctrl);
@@ -425,9 +412,12 @@
{
struct slot *slot = hotplug_slot->private;
struct controller *ctrl = slot->ctrl;
+ struct pci_dev *pdev = ctrl_dev(ctrl);
+ pci_config_pm_runtime_get(pdev);
pcie_write_cmd_nowait(ctrl, status << 6,
PCI_EXP_SLTCTL_AIC | PCI_EXP_SLTCTL_PIC);
+ pci_config_pm_runtime_put(pdev);
return 0;
}
@@ -539,20 +529,35 @@
{
struct controller *ctrl = (struct controller *)dev_id;
struct pci_dev *pdev = ctrl_dev(ctrl);
- struct pci_bus *subordinate = pdev->subordinate;
- struct pci_dev *dev;
- struct slot *slot = ctrl->slot;
+ struct device *parent = pdev->dev.parent;
u16 status, events;
- u8 present;
- bool link;
- /* Interrupts cannot originate from a controller that's asleep */
+ /*
+ * Interrupts only occur in D3hot or shallower (PCIe r4.0, sec 6.7.3.4).
+ */
if (pdev->current_state == PCI_D3cold)
return IRQ_NONE;
+ /*
+ * Keep the port accessible by holding a runtime PM ref on its parent.
+ * Defer resume of the parent to the IRQ thread if it's suspended.
+ * Mask the interrupt until then.
+ */
+ if (parent) {
+ pm_runtime_get_noresume(parent);
+ if (!pm_runtime_active(parent)) {
+ pm_runtime_put(parent);
+ disable_irq_nosync(irq);
+ atomic_or(RERUN_ISR, &ctrl->pending_events);
+ return IRQ_WAKE_THREAD;
+ }
+ }
+
pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &status);
if (status == (u16) ~0) {
ctrl_info(ctrl, "%s: no response from device\n", __func__);
+ if (parent)
+ pm_runtime_put(parent);
return IRQ_NONE;
}
@@ -571,86 +576,119 @@
if (ctrl->power_fault_detected)
events &= ~PCI_EXP_SLTSTA_PFD;
- if (!events)
+ if (!events) {
+ if (parent)
+ pm_runtime_put(parent);
return IRQ_NONE;
-
- /* Capture link status before clearing interrupts */
- if (events & PCI_EXP_SLTSTA_DLLSC)
- link = pciehp_check_link_active(ctrl);
+ }
pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, events);
ctrl_dbg(ctrl, "pending interrupts %#06x from Slot Status\n", events);
+ if (parent)
+ pm_runtime_put(parent);
- /* Check Command Complete Interrupt Pending */
+ /*
+ * Command Completed notifications are not deferred to the
+ * IRQ thread because it may be waiting for their arrival.
+ */
if (events & PCI_EXP_SLTSTA_CC) {
ctrl->cmd_busy = 0;
smp_mb();
wake_up(&ctrl->queue);
+
+ if (events == PCI_EXP_SLTSTA_CC)
+ return IRQ_HANDLED;
+
+ events &= ~PCI_EXP_SLTSTA_CC;
}
- if (subordinate) {
- list_for_each_entry(dev, &subordinate->devices, bus_list) {
- if (dev->ignore_hotplug) {
- ctrl_dbg(ctrl, "ignoring hotplug event %#06x (%s requested no hotplug)\n",
- events, pci_name(dev));
- return IRQ_HANDLED;
- }
+ if (pdev->ignore_hotplug) {
+ ctrl_dbg(ctrl, "ignoring hotplug event %#06x\n", events);
+ return IRQ_HANDLED;
+ }
+
+ /* Save pending events for consumption by IRQ thread. */
+ atomic_or(events, &ctrl->pending_events);
+ return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t pciehp_ist(int irq, void *dev_id)
+{
+ struct controller *ctrl = (struct controller *)dev_id;
+ struct pci_dev *pdev = ctrl_dev(ctrl);
+ struct slot *slot = ctrl->slot;
+ irqreturn_t ret;
+ u32 events;
+
+ pci_config_pm_runtime_get(pdev);
+
+ /* rerun pciehp_isr() if the port was inaccessible on interrupt */
+ if (atomic_fetch_and(~RERUN_ISR, &ctrl->pending_events) & RERUN_ISR) {
+ ret = pciehp_isr(irq, dev_id);
+ enable_irq(irq);
+ if (ret != IRQ_WAKE_THREAD) {
+ pci_config_pm_runtime_put(pdev);
+ return ret;
}
}
+ synchronize_hardirq(irq);
+ events = atomic_xchg(&ctrl->pending_events, 0);
+ if (!events) {
+ pci_config_pm_runtime_put(pdev);
+ return IRQ_NONE;
+ }
+
/* Check Attention Button Pressed */
if (events & PCI_EXP_SLTSTA_ABP) {
ctrl_info(ctrl, "Slot(%s): Attention button pressed\n",
slot_name(slot));
- pciehp_queue_interrupt_event(slot, INT_BUTTON_PRESS);
+ pciehp_handle_button_press(slot);
}
/*
- * Check Link Status Changed at higher precedence than Presence
- * Detect Changed. The PDS value may be set to "card present" from
- * out-of-band detection, which may be in conflict with a Link Down
- * and cause the wrong event to queue.
+ * Disable requests have higher priority than Presence Detect Changed
+ * or Data Link Layer State Changed events.
*/
- if (events & PCI_EXP_SLTSTA_DLLSC) {
- ctrl_info(ctrl, "Slot(%s): Link %s\n", slot_name(slot),
- link ? "Up" : "Down");
- pciehp_queue_interrupt_event(slot, link ? INT_LINK_UP :
- INT_LINK_DOWN);
- } else if (events & PCI_EXP_SLTSTA_PDC) {
- present = !!(status & PCI_EXP_SLTSTA_PDS);
- ctrl_info(ctrl, "Slot(%s): Card %spresent\n", slot_name(slot),
- present ? "" : "not ");
- pciehp_queue_interrupt_event(slot, present ? INT_PRESENCE_ON :
- INT_PRESENCE_OFF);
- }
+ down_read(&ctrl->reset_lock);
+ if (events & DISABLE_SLOT)
+ pciehp_handle_disable_request(slot);
+ else if (events & (PCI_EXP_SLTSTA_PDC | PCI_EXP_SLTSTA_DLLSC))
+ pciehp_handle_presence_or_link_change(slot, events);
+ up_read(&ctrl->reset_lock);
/* Check Power Fault Detected */
if ((events & PCI_EXP_SLTSTA_PFD) && !ctrl->power_fault_detected) {
ctrl->power_fault_detected = 1;
ctrl_err(ctrl, "Slot(%s): Power fault\n", slot_name(slot));
- pciehp_queue_interrupt_event(slot, INT_POWER_FAULT);
+ pciehp_set_attention_status(slot, 1);
+ pciehp_green_led_off(slot);
}
+ pci_config_pm_runtime_put(pdev);
+ wake_up(&ctrl->requester);
return IRQ_HANDLED;
}
-static irqreturn_t pcie_isr(int irq, void *dev_id)
+static int pciehp_poll(void *data)
{
- irqreturn_t rc, handled = IRQ_NONE;
+ struct controller *ctrl = data;
- /*
- * To guarantee that all interrupt events are serviced, we need to
- * re-inspect Slot Status register after clearing what is presumed
- * to be the last pending interrupt.
- */
- do {
- rc = pciehp_isr(irq, dev_id);
- if (rc == IRQ_HANDLED)
- handled = IRQ_HANDLED;
- } while (rc == IRQ_HANDLED);
+ schedule_timeout_idle(10 * HZ); /* start with 10 sec delay */
- /* Return IRQ_HANDLED if we handled one or more events */
- return handled;
+ while (!kthread_should_stop()) {
+ /* poll for interrupt events or user requests */
+ while (pciehp_isr(IRQ_NOTCONNECTED, ctrl) == IRQ_WAKE_THREAD ||
+ atomic_read(&ctrl->pending_events))
+ pciehp_ist(IRQ_NOTCONNECTED, ctrl);
+
+ if (pciehp_poll_time <= 0 || pciehp_poll_time > 60)
+ pciehp_poll_time = 2; /* clamp to sane value */
+
+ schedule_timeout_idle(pciehp_poll_time * HZ);
+ }
+
+ return 0;
}
static void pcie_enable_notification(struct controller *ctrl)
@@ -691,17 +729,6 @@
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, cmd);
}
-void pcie_reenable_notification(struct controller *ctrl)
-{
- /*
- * Clear both Presence and Data Link Layer Changed to make sure
- * those events still fire after we have re-enabled them.
- */
- pcie_capability_write_word(ctrl->pcie->port, PCI_EXP_SLTSTA,
- PCI_EXP_SLTSTA_PDC | PCI_EXP_SLTSTA_DLLSC);
- pcie_enable_notification(ctrl);
-}
-
static void pcie_disable_notification(struct controller *ctrl)
{
u16 mask;
@@ -715,6 +742,12 @@
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, 0);
}
+void pcie_clear_hotplug_events(struct controller *ctrl)
+{
+ pcie_capability_write_word(ctrl_dev(ctrl), PCI_EXP_SLTSTA,
+ PCI_EXP_SLTSTA_PDC | PCI_EXP_SLTSTA_DLLSC);
+}
+
/*
* pciehp has a 1:1 bus:slot relationship so we ultimately want a secondary
* bus reset of the bridge, but at the same time we want to ensure that it is
@@ -728,10 +761,13 @@
struct controller *ctrl = slot->ctrl;
struct pci_dev *pdev = ctrl_dev(ctrl);
u16 stat_mask = 0, ctrl_mask = 0;
+ int rc;
if (probe)
return 0;
+ down_write(&ctrl->reset_lock);
+
if (!ATTN_BUTTN(ctrl)) {
ctrl_mask |= PCI_EXP_SLTCTL_PDCE;
stat_mask |= PCI_EXP_SLTSTA_PDC;
@@ -742,18 +778,16 @@
pcie_write_cmd(ctrl, 0, ctrl_mask);
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, 0);
- if (pciehp_poll_mode)
- del_timer_sync(&ctrl->poll_timer);
- pci_reset_bridge_secondary_bus(ctrl->pcie->port);
+ rc = pci_bridge_secondary_bus_reset(ctrl->pcie->port);
pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, stat_mask);
pcie_write_cmd_nowait(ctrl, ctrl_mask, ctrl_mask);
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, ctrl_mask);
- if (pciehp_poll_mode)
- int_poll_timeout(&ctrl->poll_timer);
- return 0;
+
+ up_write(&ctrl->reset_lock);
+ return rc;
}
int pcie_init_notification(struct controller *ctrl)
@@ -765,7 +799,7 @@
return 0;
}
-static void pcie_shutdown_notification(struct controller *ctrl)
+void pcie_shutdown_notification(struct controller *ctrl)
{
if (ctrl->notification_enabled) {
pcie_disable_notification(ctrl);
@@ -776,32 +810,29 @@
static int pcie_init_slot(struct controller *ctrl)
{
+ struct pci_bus *subordinate = ctrl_dev(ctrl)->subordinate;
struct slot *slot;
slot = kzalloc(sizeof(*slot), GFP_KERNEL);
if (!slot)
return -ENOMEM;
- slot->wq = alloc_ordered_workqueue("pciehp-%u", 0, PSN(ctrl));
- if (!slot->wq)
- goto abort;
+ down_read(&pci_bus_sem);
+ slot->state = list_empty(&subordinate->devices) ? OFF_STATE : ON_STATE;
+ up_read(&pci_bus_sem);
slot->ctrl = ctrl;
mutex_init(&slot->lock);
- mutex_init(&slot->hotplug_lock);
INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work);
ctrl->slot = slot;
return 0;
-abort:
- kfree(slot);
- return -ENOMEM;
}
static void pcie_cleanup_slot(struct controller *ctrl)
{
struct slot *slot = ctrl->slot;
- cancel_delayed_work(&slot->work);
- destroy_workqueue(slot->wq);
+
+ cancel_delayed_work_sync(&slot->work);
kfree(slot);
}
@@ -826,6 +857,7 @@
{
struct controller *ctrl;
u32 slot_cap, link_cap;
+ u8 occupied, poweron;
struct pci_dev *pdev = dev->port;
ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);
@@ -847,6 +879,8 @@
ctrl->slot_cap = slot_cap;
mutex_init(&ctrl->ctrl_lock);
+ init_rwsem(&ctrl->reset_lock);
+ init_waitqueue_head(&ctrl->requester);
init_waitqueue_head(&ctrl->queue);
dbg_ctrl(ctrl);
@@ -855,16 +889,11 @@
if (link_cap & PCI_EXP_LNKCAP_DLLLARC)
ctrl->link_active_reporting = 1;
- /*
- * Clear all remaining event bits in Slot Status register except
- * Presence Detect Changed. We want to make sure possible
- * hotplug event is triggered when the interrupt is unmasked so
- * that we don't lose that event.
- */
+ /* Clear all remaining event bits in Slot Status register. */
pcie_capability_write_word(pdev, PCI_EXP_SLTSTA,
PCI_EXP_SLTSTA_ABP | PCI_EXP_SLTSTA_PFD |
PCI_EXP_SLTSTA_MRLSC | PCI_EXP_SLTSTA_CC |
- PCI_EXP_SLTSTA_DLLSC);
+ PCI_EXP_SLTSTA_DLLSC | PCI_EXP_SLTSTA_PDC);
ctrl_info(ctrl, "Slot #%d AttnBtn%c PwrCtrl%c MRL%c AttnInd%c PwrInd%c HotPlug%c Surprise%c Interlock%c NoCompl%c LLActRep%c%s\n",
(slot_cap & PCI_EXP_SLTCAP_PSN) >> 19,
@@ -883,6 +912,19 @@
if (pcie_init_slot(ctrl))
goto abort_ctrl;
+ /*
+ * If empty slot's power status is on, turn power off. The IRQ isn't
+ * requested yet, so avoid triggering a notification with this command.
+ */
+ if (POWER_CTRL(ctrl)) {
+ pciehp_get_adapter_status(ctrl->slot, &occupied);
+ pciehp_get_power_status(ctrl->slot, &poweron);
+ if (!occupied && poweron) {
+ pcie_disable_notification(ctrl);
+ pciehp_power_off_slot(ctrl->slot);
+ }
+ }
+
return ctrl;
abort_ctrl:
@@ -893,7 +935,6 @@
void pciehp_release_ctrl(struct controller *ctrl)
{
- pcie_shutdown_notification(ctrl);
pcie_cleanup_slot(ctrl);
kfree(ctrl);
}
diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c
index 3f518de..5c58c22 100644
--- a/drivers/pci/hotplug/pciehp_pci.c
+++ b/drivers/pci/hotplug/pciehp_pci.c
@@ -62,9 +62,8 @@
return ret;
}
-int pciehp_unconfigure_device(struct slot *p_slot)
+void pciehp_unconfigure_device(struct slot *p_slot)
{
- int rc = 0;
u8 presence = 0;
struct pci_dev *dev, *temp;
struct pci_bus *parent = p_slot->ctrl->pcie->port->subordinate;
@@ -107,5 +106,4 @@
}
pci_unlock_rescan_remove();
- return rc;
}
diff --git a/drivers/pci/hotplug/pcihp_skeleton.c b/drivers/pci/hotplug/pcihp_skeleton.c
deleted file mode 100644
index c19694a..0000000
--- a/drivers/pci/hotplug/pcihp_skeleton.c
+++ /dev/null
@@ -1,348 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * PCI Hot Plug Controller Skeleton Driver - 0.3
- *
- * Copyright (C) 2001,2003 Greg Kroah-Hartman (greg@kroah.com)
- * Copyright (C) 2001,2003 IBM Corp.
- *
- * All rights reserved.
- *
- * This driver is to be used as a skeleton driver to show how to interface
- * with the pci hotplug core easily.
- *
- * Send feedback to <greg@kroah.com>
- *
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/pci_hotplug.h>
-#include <linux/init.h>
-
-#define SLOT_NAME_SIZE 10
-struct slot {
- u8 number;
- struct hotplug_slot *hotplug_slot;
- struct list_head slot_list;
- char name[SLOT_NAME_SIZE];
-};
-
-static LIST_HEAD(slot_list);
-
-#define MY_NAME "pcihp_skeleton"
-
-#define dbg(format, arg...) \
- do { \
- if (debug) \
- printk(KERN_DEBUG "%s: " format "\n", \
- MY_NAME, ## arg); \
- } while (0)
-#define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME, ## arg)
-#define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME, ## arg)
-#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME, ## arg)
-
-/* local variables */
-static bool debug;
-static int num_slots;
-
-#define DRIVER_VERSION "0.3"
-#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>"
-#define DRIVER_DESC "Hot Plug PCI Controller Skeleton Driver"
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-module_param(debug, bool, 0644);
-MODULE_PARM_DESC(debug, "Debugging mode enabled or not");
-
-static int enable_slot(struct hotplug_slot *slot);
-static int disable_slot(struct hotplug_slot *slot);
-static int set_attention_status(struct hotplug_slot *slot, u8 value);
-static int hardware_test(struct hotplug_slot *slot, u32 value);
-static int get_power_status(struct hotplug_slot *slot, u8 *value);
-static int get_attention_status(struct hotplug_slot *slot, u8 *value);
-static int get_latch_status(struct hotplug_slot *slot, u8 *value);
-static int get_adapter_status(struct hotplug_slot *slot, u8 *value);
-
-static struct hotplug_slot_ops skel_hotplug_slot_ops = {
- .enable_slot = enable_slot,
- .disable_slot = disable_slot,
- .set_attention_status = set_attention_status,
- .hardware_test = hardware_test,
- .get_power_status = get_power_status,
- .get_attention_status = get_attention_status,
- .get_latch_status = get_latch_status,
- .get_adapter_status = get_adapter_status,
-};
-
-static int enable_slot(struct hotplug_slot *hotplug_slot)
-{
- struct slot *slot = hotplug_slot->private;
- int retval = 0;
-
- dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
-
- /*
- * Fill in code here to enable the specified slot
- */
-
- return retval;
-}
-
-static int disable_slot(struct hotplug_slot *hotplug_slot)
-{
- struct slot *slot = hotplug_slot->private;
- int retval = 0;
-
- dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
-
- /*
- * Fill in code here to disable the specified slot
- */
-
- return retval;
-}
-
-static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 status)
-{
- struct slot *slot = hotplug_slot->private;
- int retval = 0;
-
- dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
-
- switch (status) {
- case 0:
- /*
- * Fill in code here to turn light off
- */
- break;
-
- case 1:
- default:
- /*
- * Fill in code here to turn light on
- */
- break;
- }
-
- return retval;
-}
-
-static int hardware_test(struct hotplug_slot *hotplug_slot, u32 value)
-{
- struct slot *slot = hotplug_slot->private;
- int retval = 0;
-
- dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
-
- switch (value) {
- case 0:
- /* Specify a test here */
- break;
- case 1:
- /* Specify another test here */
- break;
- }
-
- return retval;
-}
-
-static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value)
-{
- struct slot *slot = hotplug_slot->private;
- int retval = 0;
-
- dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
-
- /*
- * Fill in logic to get the current power status of the specific
- * slot and store it in the *value location.
- */
-
- return retval;
-}
-
-static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value)
-{
- struct slot *slot = hotplug_slot->private;
- int retval = 0;
-
- dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
-
- /*
- * Fill in logic to get the current attention status of the specific
- * slot and store it in the *value location.
- */
-
- return retval;
-}
-
-static int get_latch_status(struct hotplug_slot *hotplug_slot, u8 *value)
-{
- struct slot *slot = hotplug_slot->private;
- int retval = 0;
-
- dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
-
- /*
- * Fill in logic to get the current latch status of the specific
- * slot and store it in the *value location.
- */
-
- return retval;
-}
-
-static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value)
-{
- struct slot *slot = hotplug_slot->private;
- int retval = 0;
-
- dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
-
- /*
- * Fill in logic to get the current adapter status of the specific
- * slot and store it in the *value location.
- */
-
- return retval;
-}
-
-static void release_slot(struct hotplug_slot *hotplug_slot)
-{
- struct slot *slot = hotplug_slot->private;
-
- dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
- kfree(slot->hotplug_slot->info);
- kfree(slot->hotplug_slot);
- kfree(slot);
-}
-
-static void make_slot_name(struct slot *slot)
-{
- /*
- * Stupid way to make a filename out of the slot name.
- * replace this if your hardware provides a better way to name slots.
- */
- snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%d", slot->number);
-}
-
-/**
- * init_slots - initialize 'struct slot' structures for each slot
- *
- */
-static int __init init_slots(void)
-{
- struct slot *slot;
- struct hotplug_slot *hotplug_slot;
- struct hotplug_slot_info *info;
- int retval;
- int i;
-
- /*
- * Create a structure for each slot, and register that slot
- * with the pci_hotplug subsystem.
- */
- for (i = 0; i < num_slots; ++i) {
- slot = kzalloc(sizeof(*slot), GFP_KERNEL);
- if (!slot) {
- retval = -ENOMEM;
- goto error;
- }
-
- hotplug_slot = kzalloc(sizeof(*hotplug_slot), GFP_KERNEL);
- if (!hotplug_slot) {
- retval = -ENOMEM;
- goto error_slot;
- }
- slot->hotplug_slot = hotplug_slot;
-
- info = kzalloc(sizeof(*info), GFP_KERNEL);
- if (!info) {
- retval = -ENOMEM;
- goto error_hpslot;
- }
- hotplug_slot->info = info;
-
- slot->number = i;
-
- hotplug_slot->name = slot->name;
- hotplug_slot->private = slot;
- hotplug_slot->release = &release_slot;
- make_slot_name(slot);
- hotplug_slot->ops = &skel_hotplug_slot_ops;
-
- /*
- * Initialize the slot info structure with some known
- * good values.
- */
- get_power_status(hotplug_slot, &info->power_status);
- get_attention_status(hotplug_slot, &info->attention_status);
- get_latch_status(hotplug_slot, &info->latch_status);
- get_adapter_status(hotplug_slot, &info->adapter_status);
-
- dbg("registering slot %d\n", i);
- retval = pci_hp_register(slot->hotplug_slot);
- if (retval) {
- err("pci_hp_register failed with error %d\n", retval);
- goto error_info;
- }
-
- /* add slot to our internal list */
- list_add(&slot->slot_list, &slot_list);
- }
-
- return 0;
-error_info:
- kfree(info);
-error_hpslot:
- kfree(hotplug_slot);
-error_slot:
- kfree(slot);
-error:
- return retval;
-}
-
-static void __exit cleanup_slots(void)
-{
- struct slot *slot, *next;
-
- /*
- * Unregister all of our slots with the pci_hotplug subsystem.
- * Memory will be freed in release_slot() callback after slot's
- * lifespan is finished.
- */
- list_for_each_entry_safe(slot, next, &slot_list, slot_list) {
- list_del(&slot->slot_list);
- pci_hp_deregister(slot->hotplug_slot);
- }
-}
-
-static int __init pcihp_skel_init(void)
-{
- int retval;
-
- info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
- /*
- * Do specific initialization stuff for your driver here
- * like initializing your controller hardware (if any) and
- * determining the number of slots you have in the system
- * right now.
- */
- num_slots = 5;
-
- return init_slots();
-}
-
-static void __exit pcihp_skel_exit(void)
-{
- /*
- * Clean everything up.
- */
- cleanup_slots();
-}
-
-module_init(pcihp_skel_init);
-module_exit(pcihp_skel_exit);
diff --git a/drivers/pci/hotplug/pnv_php.c b/drivers/pci/hotplug/pnv_php.c
index 6c2e8d7..3276a5e 100644
--- a/drivers/pci/hotplug/pnv_php.c
+++ b/drivers/pci/hotplug/pnv_php.c
@@ -538,9 +538,8 @@
.disable_slot = pnv_php_disable_slot,
};
-static void pnv_php_release(struct hotplug_slot *slot)
+static void pnv_php_release(struct pnv_php_slot *php_slot)
{
- struct pnv_php_slot *php_slot = slot->private;
unsigned long flags;
/* Remove from global or child list */
@@ -596,7 +595,6 @@
php_slot->power_state_check = false;
php_slot->slot.ops = &php_slot_ops;
php_slot->slot.info = &php_slot->slot_info;
- php_slot->slot.release = pnv_php_release;
php_slot->slot.private = php_slot;
INIT_LIST_HEAD(&php_slot->children);
@@ -924,6 +922,7 @@
php_slot->state = PNV_PHP_STATE_OFFLINE;
pci_hp_deregister(&php_slot->slot);
+ pnv_php_release(php_slot);
pnv_php_put_slot(php_slot);
}
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index fb5e084..857c358 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -404,13 +404,13 @@
/*
* Unregister all of our slots with the pci_hotplug subsystem,
* and free up all memory that we had allocated.
- * memory will be freed in release_slot callback.
*/
list_for_each_entry_safe(slot, next, &rpaphp_slot_head,
rpaphp_slot_list) {
list_del(&slot->rpaphp_slot_list);
pci_hp_deregister(slot->hotplug_slot);
+ dealloc_slot_struct(slot);
}
return;
}
diff --git a/drivers/pci/hotplug/rpaphp_slot.c b/drivers/pci/hotplug/rpaphp_slot.c
index 3840a20..b916c8e 100644
--- a/drivers/pci/hotplug/rpaphp_slot.c
+++ b/drivers/pci/hotplug/rpaphp_slot.c
@@ -19,12 +19,6 @@
#include "rpaphp.h"
/* free up the memory used by a slot */
-static void rpaphp_release_slot(struct hotplug_slot *hotplug_slot)
-{
- struct slot *slot = (struct slot *) hotplug_slot->private;
- dealloc_slot_struct(slot);
-}
-
void dealloc_slot_struct(struct slot *slot)
{
kfree(slot->hotplug_slot->info);
@@ -56,7 +50,6 @@
slot->power_domain = power_domain;
slot->hotplug_slot->private = slot;
slot->hotplug_slot->ops = &rpaphp_hotplug_slot_ops;
- slot->hotplug_slot->release = &rpaphp_release_slot;
return (slot);
@@ -90,10 +83,8 @@
__func__, slot->name);
list_del(&slot->rpaphp_slot_list);
-
- retval = pci_hp_deregister(php_slot);
- if (retval)
- err("Problem unregistering a slot %s\n", slot->name);
+ pci_hp_deregister(php_slot);
+ dealloc_slot_struct(slot);
dbg("%s - Exit: rc[%d]\n", __func__, retval);
return retval;
diff --git a/drivers/pci/hotplug/s390_pci_hpc.c b/drivers/pci/hotplug/s390_pci_hpc.c
index ffdc297..93b5341 100644
--- a/drivers/pci/hotplug/s390_pci_hpc.c
+++ b/drivers/pci/hotplug/s390_pci_hpc.c
@@ -130,15 +130,6 @@
return 0;
}
-static void release_slot(struct hotplug_slot *hotplug_slot)
-{
- struct slot *slot = hotplug_slot->private;
-
- kfree(slot->hotplug_slot->info);
- kfree(slot->hotplug_slot);
- kfree(slot);
-}
-
static struct hotplug_slot_ops s390_hotplug_slot_ops = {
.enable_slot = enable_slot,
.disable_slot = disable_slot,
@@ -175,7 +166,6 @@
hotplug_slot->info = info;
hotplug_slot->ops = &s390_hotplug_slot_ops;
- hotplug_slot->release = &release_slot;
get_power_status(hotplug_slot, &info->power_status);
get_adapter_status(hotplug_slot, &info->adapter_status);
@@ -209,5 +199,8 @@
continue;
list_del(&slot->slot_list);
pci_hp_deregister(slot->hotplug_slot);
+ kfree(slot->hotplug_slot->info);
+ kfree(slot->hotplug_slot);
+ kfree(slot);
}
}
diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c
index 78b6bdb..babd234 100644
--- a/drivers/pci/hotplug/sgi_hotplug.c
+++ b/drivers/pci/hotplug/sgi_hotplug.c
@@ -628,7 +628,6 @@
goto alloc_err;
}
bss_hotplug_slot->ops = &sn_hotplug_slot_ops;
- bss_hotplug_slot->release = &sn_release_slot;
rc = pci_hp_register(bss_hotplug_slot, pci_bus, device, name);
if (rc)
@@ -656,8 +655,10 @@
sn_release_slot(bss_hotplug_slot);
/* destroy anything else on the list */
- while ((bss_hotplug_slot = sn_hp_destroy()))
+ while ((bss_hotplug_slot = sn_hp_destroy())) {
pci_hp_deregister(bss_hotplug_slot);
+ sn_release_slot(bss_hotplug_slot);
+ }
return rc;
}
@@ -703,8 +704,10 @@
{
struct hotplug_slot *bss_hotplug_slot;
- while ((bss_hotplug_slot = sn_hp_destroy()))
+ while ((bss_hotplug_slot = sn_hp_destroy())) {
pci_hp_deregister(bss_hotplug_slot);
+ sn_release_slot(bss_hotplug_slot);
+ }
if (!list_empty(&sn_hp_list))
printk(KERN_ERR "%s: internal list is not empty\n", __FILE__);
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index e91be28..97cee23 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -61,22 +61,6 @@
.get_adapter_status = get_adapter_status,
};
-/**
- * release_slot - free up the memory used by a slot
- * @hotplug_slot: slot to free
- */
-static void release_slot(struct hotplug_slot *hotplug_slot)
-{
- struct slot *slot = hotplug_slot->private;
-
- ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
- __func__, slot_name(slot));
-
- kfree(slot->hotplug_slot->info);
- kfree(slot->hotplug_slot);
- kfree(slot);
-}
-
static int init_slots(struct controller *ctrl)
{
struct slot *slot;
@@ -125,7 +109,6 @@
/* register this slot with the hotplug pci core */
hotplug_slot->private = slot;
- hotplug_slot->release = &release_slot;
snprintf(name, SLOT_NAME_SIZE, "%d", slot->number);
hotplug_slot->ops = &shpchp_hotplug_slot_ops;
@@ -171,6 +154,9 @@
cancel_delayed_work(&slot->work);
destroy_workqueue(slot->wq);
pci_hp_deregister(slot->hotplug_slot);
+ kfree(slot->hotplug_slot->info);
+ kfree(slot->hotplug_slot);
+ kfree(slot);
}
}
@@ -270,11 +256,30 @@
return 0;
}
+static bool shpc_capable(struct pci_dev *bridge)
+{
+ /*
+ * It is assumed that AMD GOLAM chips support SHPC but they do not
+ * have SHPC capability.
+ */
+ if (bridge->vendor == PCI_VENDOR_ID_AMD &&
+ bridge->device == PCI_DEVICE_ID_AMD_GOLAM_7450)
+ return true;
+
+ if (pci_find_capability(bridge, PCI_CAP_ID_SHPC))
+ return true;
+
+ return false;
+}
+
static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
int rc;
struct controller *ctrl;
+ if (!shpc_capable(pdev))
+ return -ENODEV;
+
if (acpi_get_hp_hw_control_from_firmware(pdev))
return -ENODEV;
@@ -303,6 +308,7 @@
if (rc)
goto err_cleanup_slots;
+ pdev->shpc_managed = 1;
return 0;
err_cleanup_slots:
@@ -319,6 +325,7 @@
{
struct controller *ctrl = pci_get_drvdata(dev);
+ dev->shpc_managed = 0;
shpchp_remove_ctrl_files(ctrl);
ctrl->hpc_ops->release_ctlr(ctrl);
kfree(ctrl);
diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c
index 1047b56..1267dcc 100644
--- a/drivers/pci/hotplug/shpchp_ctrl.c
+++ b/drivers/pci/hotplug/shpchp_ctrl.c
@@ -654,6 +654,7 @@
switch (p_slot->state) {
case BLINKINGON_STATE:
cancel_delayed_work(&p_slot->work);
+ /* fall through */
case STATIC_STATE:
p_slot->state = POWERON_STATE;
mutex_unlock(&p_slot->lock);
@@ -689,6 +690,7 @@
switch (p_slot->state) {
case BLINKINGOFF_STATE:
cancel_delayed_work(&p_slot->work);
+ /* fall through */
case STATIC_STATE:
p_slot->state = POWEROFF_STATE;
mutex_unlock(&p_slot->lock);
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index d0d73db..c5f3cd4e 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -575,6 +575,22 @@
}
/**
+ * pci_iov_remove - clean up SR-IOV state after PF driver is detached
+ * @dev: the PCI device
+ */
+void pci_iov_remove(struct pci_dev *dev)
+{
+ struct pci_sriov *iov = dev->sriov;
+
+ if (!dev->is_physfn)
+ return;
+
+ iov->driver_max_VFs = iov->total_VFs;
+ if (iov->num_VFs)
+ pci_warn(dev, "driver left SR-IOV enabled after remove\n");
+}
+
+/**
* pci_iov_update_resource - update a VF BAR
* @dev: the PCI device
* @resno: the resource number
@@ -802,15 +818,15 @@
{
if (!dev->is_physfn)
return -ENOSYS;
+
if (numvfs > dev->sriov->total_VFs)
return -EINVAL;
/* Shouldn't change if VFs already enabled */
if (dev->sriov->ctrl & PCI_SRIOV_CTRL_VFE)
return -EBUSY;
- else
- dev->sriov->driver_max_VFs = numvfs;
+ dev->sriov->driver_max_VFs = numvfs;
return 0;
}
EXPORT_SYMBOL_GPL(pci_sriov_set_totalvfs);
diff --git a/drivers/pci/irq.c b/drivers/pci/irq.c
index 2a808e1..a1de501 100644
--- a/drivers/pci/irq.c
+++ b/drivers/pci/irq.c
@@ -86,13 +86,17 @@
va_list ap;
int ret;
char *devname;
+ unsigned long irqflags = IRQF_SHARED;
+
+ if (!handler)
+ irqflags |= IRQF_ONESHOT;
va_start(ap, fmt);
devname = kvasprintf(GFP_KERNEL, fmt, ap);
va_end(ap);
ret = request_threaded_irq(pci_irq_vector(dev, nr), handler, thread_fn,
- IRQF_SHARED, devname, dev_id);
+ irqflags, devname, dev_id);
if (ret)
kfree(devname);
return ret;
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 4d88afd..f2ef896 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -1446,6 +1446,9 @@
if (IS_ENABLED(CONFIG_GENERIC_IRQ_RESERVATION_MODE))
info->flags |= MSI_FLAG_MUST_REACTIVATE;
+ /* PCI-MSI is oneshot-safe */
+ info->chip->flags |= IRQCHIP_ONESHOT_SAFE;
+
domain = msi_create_irq_domain(fwnode, info, parent);
if (!domain)
return NULL;
diff --git a/drivers/pci/of.c b/drivers/pci/of.c
index d088c91..1836b8d 100644
--- a/drivers/pci/of.c
+++ b/drivers/pci/of.c
@@ -266,7 +266,7 @@
struct list_head *resources, resource_size_t *io_base)
{
struct device_node *dev_node = dev->of_node;
- struct resource *res;
+ struct resource *res, tmp_res;
struct resource *bus_range;
struct of_pci_range range;
struct of_pci_range_parser parser;
@@ -320,18 +320,16 @@
if (range.cpu_addr == OF_BAD_ADDR || range.size == 0)
continue;
- res = devm_kzalloc(dev, sizeof(struct resource), GFP_KERNEL);
+ err = of_pci_range_to_resource(&range, dev_node, &tmp_res);
+ if (err)
+ continue;
+
+ res = devm_kmemdup(dev, &tmp_res, sizeof(tmp_res), GFP_KERNEL);
if (!res) {
err = -ENOMEM;
goto failed;
}
- err = of_pci_range_to_resource(&range, dev_node, res);
- if (err) {
- devm_kfree(dev, res);
- continue;
- }
-
if (resource_type(res) == IORESOURCE_IO) {
if (!io_base) {
dev_err(dev, "I/O range found for %pOF. Please provide an io_base pointer to save CPU base address\n",
@@ -612,7 +610,7 @@
switch (resource_type(res)) {
case IORESOURCE_IO:
- err = pci_remap_iospace(res, iobase);
+ err = devm_pci_remap_iospace(dev, res, iobase);
if (err) {
dev_warn(dev, "error %d: failed to map resource %pR\n",
err, res);
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 65113b6..5100fd2 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -403,24 +403,7 @@
*/
bool shpchp_is_native(struct pci_dev *bridge)
{
- const struct pci_host_bridge *host;
-
- if (!IS_ENABLED(CONFIG_HOTPLUG_PCI_SHPC))
- return false;
-
- /*
- * It is assumed that AMD GOLAM chips support SHPC but they do not
- * have SHPC capability.
- */
- if (bridge->vendor == PCI_VENDOR_ID_AMD &&
- bridge->device == PCI_DEVICE_ID_AMD_GOLAM_7450)
- return true;
-
- if (!pci_find_capability(bridge, PCI_CAP_ID_SHPC))
- return false;
-
- host = pci_find_host_bridge(bridge->bus);
- return host->native_shpc_hotplug;
+ return bridge->shpc_managed;
}
/**
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index c125d53..bef17c3 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -445,6 +445,7 @@
}
pcibios_free_irq(pci_dev);
pci_dev->driver = NULL;
+ pci_iov_remove(pci_dev);
}
/* Undo the runtime PM settings in local_pci_probe() */
@@ -1667,7 +1668,7 @@
if (ret)
return ret;
#endif
-
+ dma_debug_add_bus(&pci_bus_type);
return 0;
}
postcore_initcall(pci_driver_init);
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 0c4653c..9ecfe13 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -23,7 +23,6 @@
#include <linux/fs.h>
#include <linux/capability.h>
#include <linux/security.h>
-#include <linux/pci-aspm.h>
#include <linux/slab.h>
#include <linux/vgaarb.h>
#include <linux/pm_runtime.h>
@@ -1449,7 +1448,9 @@
if (val != 1)
return -EINVAL;
+ pm_runtime_get_sync(dev);
result = pci_reset_function(pdev);
+ pm_runtime_put(dev);
if (result < 0)
return result;
@@ -1746,6 +1747,9 @@
#endif
&pci_bridge_attr_group,
&pcie_dev_attr_group,
+#ifdef CONFIG_PCIEAER
+ &aer_stats_attr_group,
+#endif
NULL,
};
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 97acba7..80da484 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -23,7 +23,6 @@
#include <linux/string.h>
#include <linux/log2.h>
#include <linux/logic_pio.h>
-#include <linux/pci-aspm.h>
#include <linux/pm_wakeup.h>
#include <linux/interrupt.h>
#include <linux/device.h>
@@ -115,6 +114,9 @@
/* If set, the PCIe ATS capability will not be used. */
static bool pcie_ats_disabled;
+/* If set, the PCI config space of each device is printed during boot. */
+bool pci_early_dump;
+
bool pci_ats_disabled(void)
{
return pcie_ats_disabled;
@@ -191,6 +193,168 @@
EXPORT_SYMBOL_GPL(pci_ioremap_wc_bar);
#endif
+/**
+ * pci_dev_str_match_path - test if a path string matches a device
+ * @dev: the PCI device to test
+ * @p: string to match the device against
+ * @endptr: pointer to the string after the match
+ *
+ * Test if a string (typically from a kernel parameter) formatted as a
+ * path of device/function addresses matches a PCI device. The string must
+ * be of the form:
+ *
+ * [<domain>:]<bus>:<device>.<func>[/<device>.<func>]*
+ *
+ * A path for a device can be obtained using 'lspci -t'. Using a path
+ * is more robust against bus renumbering than using only a single bus,
+ * device and function address.
+ *
+ * Returns 1 if the string matches the device, 0 if it does not and
+ * a negative error code if it fails to parse the string.
+ */
+static int pci_dev_str_match_path(struct pci_dev *dev, const char *path,
+ const char **endptr)
+{
+ int ret;
+ int seg, bus, slot, func;
+ char *wpath, *p;
+ char end;
+
+ *endptr = strchrnul(path, ';');
+
+ wpath = kmemdup_nul(path, *endptr - path, GFP_KERNEL);
+ if (!wpath)
+ return -ENOMEM;
+
+ while (1) {
+ p = strrchr(wpath, '/');
+ if (!p)
+ break;
+ ret = sscanf(p, "/%x.%x%c", &slot, &func, &end);
+ if (ret != 2) {
+ ret = -EINVAL;
+ goto free_and_exit;
+ }
+
+ if (dev->devfn != PCI_DEVFN(slot, func)) {
+ ret = 0;
+ goto free_and_exit;
+ }
+
+ /*
+ * Note: we don't need to get a reference to the upstream
+ * bridge because we hold a reference to the top level
+ * device which should hold a reference to the bridge,
+ * and so on.
+ */
+ dev = pci_upstream_bridge(dev);
+ if (!dev) {
+ ret = 0;
+ goto free_and_exit;
+ }
+
+ *p = 0;
+ }
+
+ ret = sscanf(wpath, "%x:%x:%x.%x%c", &seg, &bus, &slot,
+ &func, &end);
+ if (ret != 4) {
+ seg = 0;
+ ret = sscanf(wpath, "%x:%x.%x%c", &bus, &slot, &func, &end);
+ if (ret != 3) {
+ ret = -EINVAL;
+ goto free_and_exit;
+ }
+ }
+
+ ret = (seg == pci_domain_nr(dev->bus) &&
+ bus == dev->bus->number &&
+ dev->devfn == PCI_DEVFN(slot, func));
+
+free_and_exit:
+ kfree(wpath);
+ return ret;
+}
+
+/**
+ * pci_dev_str_match - test if a string matches a device
+ * @dev: the PCI device to test
+ * @p: string to match the device against
+ * @endptr: pointer to the string after the match
+ *
+ * Test if a string (typically from a kernel parameter) matches a specified
+ * PCI device. The string may be of one of the following formats:
+ *
+ * [<domain>:]<bus>:<device>.<func>[/<device>.<func>]*
+ * pci:<vendor>:<device>[:<subvendor>:<subdevice>]
+ *
+ * The first format specifies a PCI bus/device/function address which
+ * may change if new hardware is inserted, if motherboard firmware changes,
+ * or due to changes caused in kernel parameters. If the domain is
+ * left unspecified, it is taken to be 0. In order to be robust against
+ * bus renumbering issues, a path of PCI device/function numbers may be used
+ * to address the specific device. The path for a device can be determined
+ * through the use of 'lspci -t'.
+ *
+ * The second format matches devices using IDs in the configuration
+ * space which may match multiple devices in the system. A value of 0
+ * for any field will match all devices. (Note: this differs from
+ * in-kernel code that uses PCI_ANY_ID which is ~0; this is for
+ * legacy reasons and convenience so users don't have to specify
+ * FFFFFFFFs on the command line.)
+ *
+ * Returns 1 if the string matches the device, 0 if it does not and
+ * a negative error code if the string cannot be parsed.
+ */
+static int pci_dev_str_match(struct pci_dev *dev, const char *p,
+ const char **endptr)
+{
+ int ret;
+ int count;
+ unsigned short vendor, device, subsystem_vendor, subsystem_device;
+
+ if (strncmp(p, "pci:", 4) == 0) {
+ /* PCI vendor/device (subvendor/subdevice) IDs are specified */
+ p += 4;
+ ret = sscanf(p, "%hx:%hx:%hx:%hx%n", &vendor, &device,
+ &subsystem_vendor, &subsystem_device, &count);
+ if (ret != 4) {
+ ret = sscanf(p, "%hx:%hx%n", &vendor, &device, &count);
+ if (ret != 2)
+ return -EINVAL;
+
+ subsystem_vendor = 0;
+ subsystem_device = 0;
+ }
+
+ p += count;
+
+ if ((!vendor || vendor == dev->vendor) &&
+ (!device || device == dev->device) &&
+ (!subsystem_vendor ||
+ subsystem_vendor == dev->subsystem_vendor) &&
+ (!subsystem_device ||
+ subsystem_device == dev->subsystem_device))
+ goto found;
+ } else {
+ /*
+ * PCI Bus, Device, Function IDs are specified
+ * (optionally, may include a path of devfns following it)
+ */
+ ret = pci_dev_str_match_path(dev, p, &p);
+ if (ret < 0)
+ return ret;
+ else if (ret)
+ goto found;
+ }
+
+ *endptr = p;
+ return 0;
+
+found:
+ *endptr = p;
+ return 1;
+}
static int __pci_find_next_cap_ttl(struct pci_bus *bus, unsigned int devfn,
u8 pos, int cap, int *ttl)
@@ -1171,6 +1335,33 @@
}
}
+static void pci_restore_rebar_state(struct pci_dev *pdev)
+{
+ unsigned int pos, nbars, i;
+ u32 ctrl;
+
+ pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_REBAR);
+ if (!pos)
+ return;
+
+ pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl);
+ nbars = (ctrl & PCI_REBAR_CTRL_NBAR_MASK) >>
+ PCI_REBAR_CTRL_NBAR_SHIFT;
+
+ for (i = 0; i < nbars; i++, pos += 8) {
+ struct resource *res;
+ int bar_idx, size;
+
+ pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl);
+ bar_idx = ctrl & PCI_REBAR_CTRL_BAR_IDX;
+ res = pdev->resource + bar_idx;
+ size = order_base_2((resource_size(res) >> 20) | 1) - 1;
+ ctrl &= ~PCI_REBAR_CTRL_BAR_SIZE;
+ ctrl |= size << PCI_REBAR_CTRL_BAR_SHIFT;
+ pci_write_config_dword(pdev, pos + PCI_REBAR_CTRL, ctrl);
+ }
+}
+
/**
* pci_restore_state - Restore the saved state of a PCI device
* @dev: - PCI device that we're dealing with
@@ -1186,6 +1377,7 @@
pci_restore_pri_state(dev);
pci_restore_ats_state(dev);
pci_restore_vc_state(dev);
+ pci_restore_rebar_state(dev);
pci_cleanup_aer_error_status_regs(dev);
@@ -2045,6 +2237,7 @@
case PCI_D2:
if (pci_no_d1d2(dev))
break;
+ /* else: fall through */
default:
target_state = state;
}
@@ -2290,7 +2483,7 @@
* @bridge: Bridge to check
*
* This function checks if it is possible to move the bridge to D3.
- * Currently we only allow D3 for recent enough PCIe ports.
+ * Currently we only allow D3 for recent enough PCIe ports and Thunderbolt.
*/
bool pci_bridge_d3_possible(struct pci_dev *bridge)
{
@@ -2305,18 +2498,27 @@
return false;
/*
- * Hotplug interrupts cannot be delivered if the link is down,
- * so parents of a hotplug port must stay awake. In addition,
- * hotplug ports handled by firmware in System Management Mode
+ * Hotplug ports handled by firmware in System Management Mode
* may not be put into D3 by the OS (Thunderbolt on non-Macs).
- * For simplicity, disallow in general for now.
*/
- if (bridge->is_hotplug_bridge)
+ if (bridge->is_hotplug_bridge && !pciehp_is_native(bridge))
return false;
if (pci_bridge_d3_force)
return true;
+ /* Even the oldest 2010 Thunderbolt controller supports D3. */
+ if (bridge->is_thunderbolt)
+ return true;
+
+ /*
+ * Hotplug ports handled natively by the OS were not validated
+ * by vendors for runtime D3 at least until 2018 because there
+ * was no OS support.
+ */
+ if (bridge->is_hotplug_bridge)
+ return false;
+
/*
* It should be safe to put PCIe ports from 2015 or newer
* to D3.
@@ -2820,6 +3022,66 @@
pci_acs_enable = 1;
}
+static const char *disable_acs_redir_param;
+
+/**
+ * pci_disable_acs_redir - disable ACS redirect capabilities
+ * @dev: the PCI device
+ *
+ * For only devices specified in the disable_acs_redir parameter.
+ */
+static void pci_disable_acs_redir(struct pci_dev *dev)
+{
+ int ret = 0;
+ const char *p;
+ int pos;
+ u16 ctrl;
+
+ if (!disable_acs_redir_param)
+ return;
+
+ p = disable_acs_redir_param;
+ while (*p) {
+ ret = pci_dev_str_match(dev, p, &p);
+ if (ret < 0) {
+ pr_info_once("PCI: Can't parse disable_acs_redir parameter: %s\n",
+ disable_acs_redir_param);
+
+ break;
+ } else if (ret == 1) {
+ /* Found a match */
+ break;
+ }
+
+ if (*p != ';' && *p != ',') {
+ /* End of param or invalid format */
+ break;
+ }
+ p++;
+ }
+
+ if (ret != 1)
+ return;
+
+ if (!pci_dev_specific_disable_acs_redir(dev))
+ return;
+
+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ACS);
+ if (!pos) {
+ pci_warn(dev, "cannot disable ACS redirect for this hardware as it does not have ACS capabilities\n");
+ return;
+ }
+
+ pci_read_config_word(dev, pos + PCI_ACS_CTRL, &ctrl);
+
+ /* P2P Request & Completion Redirect */
+ ctrl &= ~(PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_EC);
+
+ pci_write_config_word(dev, pos + PCI_ACS_CTRL, ctrl);
+
+ pci_info(dev, "disabled ACS redirect\n");
+}
+
/**
* pci_std_enable_acs - enable ACS on devices using standard ACS capabilites
* @dev: the PCI device
@@ -2859,12 +3121,22 @@
void pci_enable_acs(struct pci_dev *dev)
{
if (!pci_acs_enable)
- return;
+ goto disable_acs_redir;
if (!pci_dev_specific_enable_acs(dev))
- return;
+ goto disable_acs_redir;
pci_std_enable_acs(dev);
+
+disable_acs_redir:
+ /*
+ * Note: pci_disable_acs_redir() must be called even if ACS was not
+ * enabled by the kernel because it may have been enabled by
+ * platform firmware. So if we are told to disable it, we should
+ * always disable it after setting the kernel's default
+ * preferences.
+ */
+ pci_disable_acs_redir(dev);
}
static bool pci_acs_flags_enabled(struct pci_dev *pdev, u16 acs_flags)
@@ -3070,7 +3342,7 @@
return pos;
pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl);
- return (ctrl & PCI_REBAR_CTRL_BAR_SIZE) >> 8;
+ return (ctrl & PCI_REBAR_CTRL_BAR_SIZE) >> PCI_REBAR_CTRL_BAR_SHIFT;
}
/**
@@ -3093,7 +3365,7 @@
pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl);
ctrl &= ~PCI_REBAR_CTRL_BAR_SIZE;
- ctrl |= size << 8;
+ ctrl |= size << PCI_REBAR_CTRL_BAR_SHIFT;
pci_write_config_dword(pdev, pos + PCI_REBAR_CTRL, ctrl);
return 0;
}
@@ -3579,6 +3851,44 @@
}
EXPORT_SYMBOL(pci_unmap_iospace);
+static void devm_pci_unmap_iospace(struct device *dev, void *ptr)
+{
+ struct resource **res = ptr;
+
+ pci_unmap_iospace(*res);
+}
+
+/**
+ * devm_pci_remap_iospace - Managed pci_remap_iospace()
+ * @dev: Generic device to remap IO address for
+ * @res: Resource describing the I/O space
+ * @phys_addr: physical address of range to be mapped
+ *
+ * Managed pci_remap_iospace(). Map is automatically unmapped on driver
+ * detach.
+ */
+int devm_pci_remap_iospace(struct device *dev, const struct resource *res,
+ phys_addr_t phys_addr)
+{
+ const struct resource **ptr;
+ int error;
+
+ ptr = devres_alloc(devm_pci_unmap_iospace, sizeof(*ptr), GFP_KERNEL);
+ if (!ptr)
+ return -ENOMEM;
+
+ error = pci_remap_iospace(res, phys_addr);
+ if (error) {
+ devres_free(ptr);
+ } else {
+ *ptr = res;
+ devres_add(dev, ptr);
+ }
+
+ return error;
+}
+EXPORT_SYMBOL(devm_pci_remap_iospace);
+
/**
* devm_pci_remap_cfgspace - Managed pci_remap_cfgspace()
* @dev: Generic device to remap IO address for
@@ -4039,7 +4349,7 @@
* Returns true if the device advertises support for PCIe function level
* resets.
*/
-static bool pcie_has_flr(struct pci_dev *dev)
+bool pcie_has_flr(struct pci_dev *dev)
{
u32 cap;
@@ -4049,6 +4359,7 @@
pcie_capability_read_dword(dev, PCI_EXP_DEVCAP, &cap);
return cap & PCI_EXP_DEVCAP_FLR;
}
+EXPORT_SYMBOL_GPL(pcie_has_flr);
/**
* pcie_flr - initiate a PCIe function level reset
@@ -4224,19 +4535,18 @@
}
/**
- * pci_reset_bridge_secondary_bus - Reset the secondary bus on a PCI bridge.
+ * pci_bridge_secondary_bus_reset - Reset the secondary bus on a PCI bridge.
* @dev: Bridge device
*
* Use the bridge control register to assert reset on the secondary bus.
* Devices on the secondary bus are left in power-on state.
*/
-int pci_reset_bridge_secondary_bus(struct pci_dev *dev)
+int pci_bridge_secondary_bus_reset(struct pci_dev *dev)
{
pcibios_reset_secondary_bus(dev);
return pci_dev_wait(dev, "bus reset", PCIE_RESET_READY_POLL_MS);
}
-EXPORT_SYMBOL_GPL(pci_reset_bridge_secondary_bus);
static int pci_parent_bus_reset(struct pci_dev *dev, int probe)
{
@@ -4253,9 +4563,7 @@
if (probe)
return 0;
- pci_reset_bridge_secondary_bus(dev->bus->self);
-
- return 0;
+ return pci_bridge_secondary_bus_reset(dev->bus->self);
}
static int pci_reset_hotplug_slot(struct hotplug_slot *hotplug, int probe)
@@ -4787,7 +5095,7 @@
EXPORT_SYMBOL_GPL(pci_probe_reset_slot);
/**
- * pci_reset_slot - reset a PCI slot
+ * __pci_reset_slot - Try to reset a PCI slot
* @slot: PCI slot to reset
*
* A PCI bus may host multiple slots, each slot may support a reset mechanism
@@ -4799,33 +5107,9 @@
* through this function. PCI config space of all devices in the slot and
* behind the slot is saved before and restored after reset.
*
- * Return 0 on success, non-zero on error.
- */
-int pci_reset_slot(struct pci_slot *slot)
-{
- int rc;
-
- rc = pci_slot_reset(slot, 1);
- if (rc)
- return rc;
-
- pci_slot_save_and_disable(slot);
-
- rc = pci_slot_reset(slot, 0);
-
- pci_slot_restore(slot);
-
- return rc;
-}
-EXPORT_SYMBOL_GPL(pci_reset_slot);
-
-/**
- * pci_try_reset_slot - Try to reset a PCI slot
- * @slot: PCI slot to reset
- *
* Same as above except return -EAGAIN if the slot cannot be locked
*/
-int pci_try_reset_slot(struct pci_slot *slot)
+static int __pci_reset_slot(struct pci_slot *slot)
{
int rc;
@@ -4846,10 +5130,11 @@
return rc;
}
-EXPORT_SYMBOL_GPL(pci_try_reset_slot);
static int pci_bus_reset(struct pci_bus *bus, int probe)
{
+ int ret;
+
if (!bus->self || !pci_bus_resetable(bus))
return -ENOTTY;
@@ -4860,11 +5145,11 @@
might_sleep();
- pci_reset_bridge_secondary_bus(bus->self);
+ ret = pci_bridge_secondary_bus_reset(bus->self);
pci_bus_unlock(bus);
- return 0;
+ return ret;
}
/**
@@ -4880,39 +5165,12 @@
EXPORT_SYMBOL_GPL(pci_probe_reset_bus);
/**
- * pci_reset_bus - reset a PCI bus
- * @bus: top level PCI bus to reset
- *
- * Do a bus reset on the given bus and any subordinate buses, saving
- * and restoring state of all devices.
- *
- * Return 0 on success, non-zero on error.
- */
-int pci_reset_bus(struct pci_bus *bus)
-{
- int rc;
-
- rc = pci_bus_reset(bus, 1);
- if (rc)
- return rc;
-
- pci_bus_save_and_disable(bus);
-
- rc = pci_bus_reset(bus, 0);
-
- pci_bus_restore(bus);
-
- return rc;
-}
-EXPORT_SYMBOL_GPL(pci_reset_bus);
-
-/**
- * pci_try_reset_bus - Try to reset a PCI bus
+ * __pci_reset_bus - Try to reset a PCI bus
* @bus: top level PCI bus to reset
*
* Same as above except return -EAGAIN if the bus cannot be locked
*/
-int pci_try_reset_bus(struct pci_bus *bus)
+static int __pci_reset_bus(struct pci_bus *bus)
{
int rc;
@@ -4924,7 +5182,7 @@
if (pci_bus_trylock(bus)) {
might_sleep();
- pci_reset_bridge_secondary_bus(bus->self);
+ rc = pci_bridge_secondary_bus_reset(bus->self);
pci_bus_unlock(bus);
} else
rc = -EAGAIN;
@@ -4933,7 +5191,19 @@
return rc;
}
-EXPORT_SYMBOL_GPL(pci_try_reset_bus);
+
+/**
+ * pci_reset_bus - Try to reset a PCI bus
+ * @pdev: top level PCI device to reset via slot/bus
+ *
+ * Same as above except return -EAGAIN if the bus cannot be locked
+ */
+int pci_reset_bus(struct pci_dev *pdev)
+{
+ return pci_probe_reset_slot(pdev->slot) ?
+ __pci_reset_slot(pdev->slot) : __pci_reset_bus(pdev->bus);
+}
+EXPORT_SYMBOL_GPL(pci_reset_bus);
/**
* pcix_get_max_mmrbc - get PCI-X maximum designed memory read byte count
@@ -5264,14 +5534,16 @@
}
/**
- * pcie_print_link_status - Report the PCI device's link speed and width
+ * __pcie_print_link_status - Report the PCI device's link speed and width
* @dev: PCI device to query
+ * @verbose: Print info even when enough bandwidth is available
*
- * Report the available bandwidth at the device. If this is less than the
- * device is capable of, report the device's maximum possible bandwidth and
- * the upstream link that limits its performance to less than that.
+ * If the available bandwidth at the device is less than the device is
+ * capable of, report the device's maximum possible bandwidth and the
+ * upstream link that limits its performance. If @verbose, always print
+ * the available bandwidth, even if the device isn't constrained.
*/
-void pcie_print_link_status(struct pci_dev *dev)
+void __pcie_print_link_status(struct pci_dev *dev, bool verbose)
{
enum pcie_link_width width, width_cap;
enum pci_bus_speed speed, speed_cap;
@@ -5281,11 +5553,11 @@
bw_cap = pcie_bandwidth_capable(dev, &speed_cap, &width_cap);
bw_avail = pcie_bandwidth_available(dev, &limiting_dev, &speed, &width);
- if (bw_avail >= bw_cap)
+ if (bw_avail >= bw_cap && verbose)
pci_info(dev, "%u.%03u Gb/s available PCIe bandwidth (%s x%d link)\n",
bw_cap / 1000, bw_cap % 1000,
PCIE_SPEED2STR(speed_cap), width_cap);
- else
+ else if (bw_avail < bw_cap)
pci_info(dev, "%u.%03u Gb/s available PCIe bandwidth, limited by %s x%d link at %s (capable of %u.%03u Gb/s with %s x%d link)\n",
bw_avail / 1000, bw_avail % 1000,
PCIE_SPEED2STR(speed), width,
@@ -5293,6 +5565,17 @@
bw_cap / 1000, bw_cap % 1000,
PCIE_SPEED2STR(speed_cap), width_cap);
}
+
+/**
+ * pcie_print_link_status - Report the PCI device's link speed and width
+ * @dev: PCI device to query
+ *
+ * Report the available bandwidth at the device.
+ */
+void pcie_print_link_status(struct pci_dev *dev)
+{
+ __pcie_print_link_status(dev, true);
+}
EXPORT_SYMBOL(pcie_print_link_status);
/**
@@ -5387,8 +5670,19 @@
* @dev: the PCI device for which alias is added
* @devfn: alias slot and function
*
- * This helper encodes 8-bit devfn as bit number in dma_alias_mask.
- * It should be called early, preferably as PCI fixup header quirk.
+ * This helper encodes an 8-bit devfn as a bit number in dma_alias_mask
+ * which is used to program permissible bus-devfn source addresses for DMA
+ * requests in an IOMMU. These aliases factor into IOMMU group creation
+ * and are useful for devices generating DMA requests beyond or different
+ * from their logical bus-devfn. Examples include device quirks where the
+ * device simply uses the wrong devfn, as well as non-transparent bridges
+ * where the alias may be a proxy for devices in another domain.
+ *
+ * IOMMU group creation is performed during device discovery or addition,
+ * prior to any potential DMA mapping and therefore prior to driver probing
+ * (especially for userspace assigned devices where IOMMU group definition
+ * cannot be left as a userspace activity). DMA aliases should therefore
+ * be configured via quirks, such as the PCI fixup header quirk.
*/
void pci_add_dma_alias(struct pci_dev *dev, u8 devfn)
{
@@ -5454,10 +5748,10 @@
static resource_size_t pci_specified_resource_alignment(struct pci_dev *dev,
bool *resize)
{
- int seg, bus, slot, func, align_order, count;
- unsigned short vendor, device, subsystem_vendor, subsystem_device;
+ int align_order, count;
resource_size_t align = pcibios_default_alignment();
- char *p;
+ const char *p;
+ int ret;
spin_lock(&resource_alignment_lock);
p = resource_alignment_param;
@@ -5477,58 +5771,21 @@
} else {
align_order = -1;
}
- if (strncmp(p, "pci:", 4) == 0) {
- /* PCI vendor/device (subvendor/subdevice) ids are specified */
- p += 4;
- if (sscanf(p, "%hx:%hx:%hx:%hx%n",
- &vendor, &device, &subsystem_vendor, &subsystem_device, &count) != 4) {
- if (sscanf(p, "%hx:%hx%n", &vendor, &device, &count) != 2) {
- printk(KERN_ERR "PCI: Can't parse resource_alignment parameter: pci:%s\n",
- p);
- break;
- }
- subsystem_vendor = subsystem_device = 0;
- }
- p += count;
- if ((!vendor || (vendor == dev->vendor)) &&
- (!device || (device == dev->device)) &&
- (!subsystem_vendor || (subsystem_vendor == dev->subsystem_vendor)) &&
- (!subsystem_device || (subsystem_device == dev->subsystem_device))) {
- *resize = true;
- if (align_order == -1)
- align = PAGE_SIZE;
- else
- align = 1 << align_order;
- /* Found */
- break;
- }
+
+ ret = pci_dev_str_match(dev, p, &p);
+ if (ret == 1) {
+ *resize = true;
+ if (align_order == -1)
+ align = PAGE_SIZE;
+ else
+ align = 1 << align_order;
+ break;
+ } else if (ret < 0) {
+ pr_err("PCI: Can't parse resource_alignment parameter: %s\n",
+ p);
+ break;
}
- else {
- if (sscanf(p, "%x:%x:%x.%x%n",
- &seg, &bus, &slot, &func, &count) != 4) {
- seg = 0;
- if (sscanf(p, "%x:%x.%x%n",
- &bus, &slot, &func, &count) != 3) {
- /* Invalid format */
- printk(KERN_ERR "PCI: Can't parse resource_alignment parameter: %s\n",
- p);
- break;
- }
- }
- p += count;
- if (seg == pci_domain_nr(dev->bus) &&
- bus == dev->bus->number &&
- slot == PCI_SLOT(dev->devfn) &&
- func == PCI_FUNC(dev->devfn)) {
- *resize = true;
- if (align_order == -1)
- align = PAGE_SIZE;
- else
- align = 1 << align_order;
- /* Found */
- break;
- }
- }
+
if (*p != ';' && *p != ',') {
/* End of param or invalid format */
break;
@@ -5805,6 +6062,8 @@
pcie_ats_disabled = true;
} else if (!strcmp(str, "noaer")) {
pci_no_aer();
+ } else if (!strcmp(str, "earlydump")) {
+ pci_early_dump = true;
} else if (!strncmp(str, "realloc=", 8)) {
pci_realloc_get_opt(str + 8);
} else if (!strncmp(str, "realloc", 7)) {
@@ -5841,6 +6100,8 @@
pcie_bus_config = PCIE_BUS_PEER2PEER;
} else if (!strncmp(str, "pcie_scan_all", 13)) {
pci_add_flags(PCI_SCAN_ALL_PCIE_DEVS);
+ } else if (!strncmp(str, "disable_acs_redir=", 18)) {
+ disable_acs_redir_param = str + 18;
} else {
printk(KERN_ERR "PCI: Unknown option `%s'\n",
str);
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index c358e7a0..6e0d152 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -7,6 +7,7 @@
#define PCI_VSEC_ID_INTEL_TBT 0x1234 /* Thunderbolt */
extern const unsigned char pcie_link_speed[];
+extern bool pci_early_dump;
bool pcie_cap_has_lnkctl(const struct pci_dev *dev);
@@ -33,6 +34,7 @@
enum pci_mmap_api mmap_api);
int pci_probe_reset_function(struct pci_dev *dev);
+int pci_bridge_secondary_bus_reset(struct pci_dev *dev);
/**
* struct pci_platform_pm_ops - Firmware PM callbacks
@@ -225,6 +227,10 @@
int pci_configure_extended_tags(struct pci_dev *dev, void *ign);
bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *pl,
int crs_timeout);
+bool pci_bus_generic_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *pl,
+ int crs_timeout);
+int pci_idt_bus_quirk(struct pci_bus *bus, int devfn, u32 *pl, int crs_timeout);
+
int pci_setup_device(struct pci_dev *dev);
int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
struct resource *res, unsigned int reg);
@@ -259,6 +265,7 @@
enum pcie_link_width pcie_get_width_cap(struct pci_dev *dev);
u32 pcie_bandwidth_capable(struct pci_dev *dev, enum pci_bus_speed *speed,
enum pcie_link_width *width);
+void __pcie_print_link_status(struct pci_dev *dev, bool verbose);
/* Single Root I/O Virtualization */
struct pci_sriov {
@@ -288,6 +295,7 @@
/* pci_dev priv_flags */
#define PCI_DEV_DISCONNECTED 0
+#define PCI_DEV_ADDED 1
static inline int pci_dev_set_disconnected(struct pci_dev *dev, void *unused)
{
@@ -300,6 +308,44 @@
return test_bit(PCI_DEV_DISCONNECTED, &dev->priv_flags);
}
+static inline void pci_dev_assign_added(struct pci_dev *dev, bool added)
+{
+ assign_bit(PCI_DEV_ADDED, &dev->priv_flags, added);
+}
+
+static inline bool pci_dev_is_added(const struct pci_dev *dev)
+{
+ return test_bit(PCI_DEV_ADDED, &dev->priv_flags);
+}
+
+#ifdef CONFIG_PCIEAER
+#include <linux/aer.h>
+
+#define AER_MAX_MULTI_ERR_DEVICES 5 /* Not likely to have more */
+
+struct aer_err_info {
+ struct pci_dev *dev[AER_MAX_MULTI_ERR_DEVICES];
+ int error_dev_num;
+
+ unsigned int id:16;
+
+ unsigned int severity:2; /* 0:NONFATAL | 1:FATAL | 2:COR */
+ unsigned int __pad1:5;
+ unsigned int multi_error_valid:1;
+
+ unsigned int first_error:5;
+ unsigned int __pad2:2;
+ unsigned int tlp_header_valid:1;
+
+ unsigned int status; /* COR/UNCOR Error Status */
+ unsigned int mask; /* COR/UNCOR Error Mask */
+ struct aer_header_log_regs tlp; /* TLP Header */
+};
+
+int aer_get_device_error_info(struct pci_dev *dev, struct aer_err_info *info);
+void aer_print_error(struct pci_dev *dev, struct aer_err_info *info);
+#endif /* CONFIG_PCIEAER */
+
#ifdef CONFIG_PCI_ATS
void pci_restore_ats_state(struct pci_dev *dev);
#else
@@ -311,6 +357,7 @@
#ifdef CONFIG_PCI_IOV
int pci_iov_init(struct pci_dev *dev);
void pci_iov_release(struct pci_dev *dev);
+void pci_iov_remove(struct pci_dev *dev);
void pci_iov_update_resource(struct pci_dev *dev, int resno);
resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno);
void pci_restore_iov_state(struct pci_dev *dev);
@@ -325,6 +372,9 @@
{
}
+static inline void pci_iov_remove(struct pci_dev *dev)
+{
+}
static inline void pci_restore_iov_state(struct pci_dev *dev)
{
}
@@ -352,6 +402,25 @@
}
void pci_enable_acs(struct pci_dev *dev);
+#ifdef CONFIG_PCI_QUIRKS
+int pci_dev_specific_acs_enabled(struct pci_dev *dev, u16 acs_flags);
+int pci_dev_specific_enable_acs(struct pci_dev *dev);
+int pci_dev_specific_disable_acs_redir(struct pci_dev *dev);
+#else
+static inline int pci_dev_specific_acs_enabled(struct pci_dev *dev,
+ u16 acs_flags)
+{
+ return -ENOTTY;
+}
+static inline int pci_dev_specific_enable_acs(struct pci_dev *dev)
+{
+ return -ENOTTY;
+}
+static inline int pci_dev_specific_disable_acs_redir(struct pci_dev *dev)
+{
+ return -ENOTTY;
+}
+#endif
/* PCI error reporting and recovery */
void pcie_do_fatal_recovery(struct pci_dev *dev, u32 service);
@@ -452,4 +521,19 @@
}
#endif
+#ifdef CONFIG_PCIEAER
+void pci_no_aer(void);
+void pci_aer_init(struct pci_dev *dev);
+void pci_aer_exit(struct pci_dev *dev);
+extern const struct attribute_group aer_stats_attr_group;
+void pci_aer_clear_fatal_status(struct pci_dev *dev);
+void pci_aer_clear_device_status(struct pci_dev *dev);
+#else
+static inline void pci_no_aer(void) { }
+static inline int pci_aer_init(struct pci_dev *d) { return -ENODEV; }
+static inline void pci_aer_exit(struct pci_dev *d) { }
+static inline void pci_aer_clear_fatal_status(struct pci_dev *dev) { }
+static inline void pci_aer_clear_device_status(struct pci_dev *dev) { }
+#endif
+
#endif /* DRIVERS_PCI_H */
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index a2e8838..83180ed 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -31,26 +31,9 @@
#include "portdrv.h"
#define AER_ERROR_SOURCES_MAX 100
-#define AER_MAX_MULTI_ERR_DEVICES 5 /* Not likely to have more */
-struct aer_err_info {
- struct pci_dev *dev[AER_MAX_MULTI_ERR_DEVICES];
- int error_dev_num;
-
- unsigned int id:16;
-
- unsigned int severity:2; /* 0:NONFATAL | 1:FATAL | 2:COR */
- unsigned int __pad1:5;
- unsigned int multi_error_valid:1;
-
- unsigned int first_error:5;
- unsigned int __pad2:2;
- unsigned int tlp_header_valid:1;
-
- unsigned int status; /* COR/UNCOR Error Status */
- unsigned int mask; /* COR/UNCOR Error Mask */
- struct aer_header_log_regs tlp; /* TLP Header */
-};
+#define AER_MAX_TYPEOF_COR_ERRS 16 /* as per PCI_ERR_COR_STATUS */
+#define AER_MAX_TYPEOF_UNCOR_ERRS 26 /* as per PCI_ERR_UNCOR_STATUS*/
struct aer_err_source {
unsigned int status;
@@ -76,6 +59,42 @@
*/
};
+/* AER stats for the device */
+struct aer_stats {
+
+ /*
+ * Fields for all AER capable devices. They indicate the errors
+ * "as seen by this device". Note that this may mean that if an
+ * end point is causing problems, the AER counters may increment
+ * at its link partner (e.g. root port) because the errors will be
+ * "seen" by the link partner and not the the problematic end point
+ * itself (which may report all counters as 0 as it never saw any
+ * problems).
+ */
+ /* Counters for different type of correctable errors */
+ u64 dev_cor_errs[AER_MAX_TYPEOF_COR_ERRS];
+ /* Counters for different type of fatal uncorrectable errors */
+ u64 dev_fatal_errs[AER_MAX_TYPEOF_UNCOR_ERRS];
+ /* Counters for different type of nonfatal uncorrectable errors */
+ u64 dev_nonfatal_errs[AER_MAX_TYPEOF_UNCOR_ERRS];
+ /* Total number of ERR_COR sent by this device */
+ u64 dev_total_cor_errs;
+ /* Total number of ERR_FATAL sent by this device */
+ u64 dev_total_fatal_errs;
+ /* Total number of ERR_NONFATAL sent by this device */
+ u64 dev_total_nonfatal_errs;
+
+ /*
+ * Fields for Root ports & root complex event collectors only, these
+ * indicate the total number of ERR_COR, ERR_FATAL, and ERR_NONFATAL
+ * messages received by the root port / event collector, INCLUDING the
+ * ones that are generated internally (by the rootport itself)
+ */
+ u64 rootport_total_cor_errs;
+ u64 rootport_total_fatal_errs;
+ u64 rootport_total_nonfatal_errs;
+};
+
#define AER_LOG_TLP_MASKS (PCI_ERR_UNC_POISON_TLP| \
PCI_ERR_UNC_ECRC| \
PCI_ERR_UNC_UNSUP| \
@@ -303,12 +322,13 @@
if (!pci_is_pcie(dev))
return 0;
+ if (pcie_ports_native)
+ return 0;
+
if (!dev->__aer_firmware_first_valid)
aer_set_firmware_first(dev);
return dev->__aer_firmware_first;
}
-#define PCI_EXP_AER_FLAGS (PCI_EXP_DEVCTL_CERE | PCI_EXP_DEVCTL_NFERE | \
- PCI_EXP_DEVCTL_FERE | PCI_EXP_DEVCTL_URRE)
static bool aer_firmware_first;
@@ -323,6 +343,9 @@
.firmware_first = 0,
};
+ if (pcie_ports_native)
+ return false;
+
if (!parsed) {
apei_hest_parse(aer_hest_parse, &info);
aer_firmware_first = info.firmware_first;
@@ -357,16 +380,30 @@
}
EXPORT_SYMBOL_GPL(pci_disable_pcie_error_reporting);
+void pci_aer_clear_device_status(struct pci_dev *dev)
+{
+ u16 sta;
+
+ pcie_capability_read_word(dev, PCI_EXP_DEVSTA, &sta);
+ pcie_capability_write_word(dev, PCI_EXP_DEVSTA, sta);
+}
+
int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
{
int pos;
- u32 status;
+ u32 status, sev;
pos = dev->aer_cap;
if (!pos)
return -EIO;
+ if (pcie_aer_get_firmware_first(dev))
+ return -EIO;
+
+ /* Clear status bits for ERR_NONFATAL errors only */
pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status);
+ pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &sev);
+ status &= ~sev;
if (status)
pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, status);
@@ -374,6 +411,26 @@
}
EXPORT_SYMBOL_GPL(pci_cleanup_aer_uncorrect_error_status);
+void pci_aer_clear_fatal_status(struct pci_dev *dev)
+{
+ int pos;
+ u32 status, sev;
+
+ pos = dev->aer_cap;
+ if (!pos)
+ return;
+
+ if (pcie_aer_get_firmware_first(dev))
+ return;
+
+ /* Clear status bits for ERR_FATAL errors only */
+ pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status);
+ pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &sev);
+ status &= sev;
+ if (status)
+ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, status);
+}
+
int pci_cleanup_aer_error_status_regs(struct pci_dev *dev)
{
int pos;
@@ -387,6 +444,9 @@
if (!pos)
return -EIO;
+ if (pcie_aer_get_firmware_first(dev))
+ return -EIO;
+
port_type = pci_pcie_type(dev);
if (port_type == PCI_EXP_TYPE_ROOT_PORT) {
pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &status);
@@ -402,10 +462,20 @@
return 0;
}
-int pci_aer_init(struct pci_dev *dev)
+void pci_aer_init(struct pci_dev *dev)
{
dev->aer_cap = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
- return pci_cleanup_aer_error_status_regs(dev);
+
+ if (dev->aer_cap)
+ dev->aer_stats = kzalloc(sizeof(struct aer_stats), GFP_KERNEL);
+
+ pci_cleanup_aer_error_status_regs(dev);
+}
+
+void pci_aer_exit(struct pci_dev *dev)
+{
+ kfree(dev->aer_stats);
+ dev->aer_stats = NULL;
}
#define AER_AGENT_RECEIVER 0
@@ -458,52 +528,52 @@
"Transaction Layer"
};
-static const char *aer_correctable_error_string[] = {
- "Receiver Error", /* Bit Position 0 */
+static const char *aer_correctable_error_string[AER_MAX_TYPEOF_COR_ERRS] = {
+ "RxErr", /* Bit Position 0 */
NULL,
NULL,
NULL,
NULL,
NULL,
- "Bad TLP", /* Bit Position 6 */
- "Bad DLLP", /* Bit Position 7 */
- "RELAY_NUM Rollover", /* Bit Position 8 */
+ "BadTLP", /* Bit Position 6 */
+ "BadDLLP", /* Bit Position 7 */
+ "Rollover", /* Bit Position 8 */
NULL,
NULL,
NULL,
- "Replay Timer Timeout", /* Bit Position 12 */
- "Advisory Non-Fatal", /* Bit Position 13 */
- "Corrected Internal Error", /* Bit Position 14 */
- "Header Log Overflow", /* Bit Position 15 */
+ "Timeout", /* Bit Position 12 */
+ "NonFatalErr", /* Bit Position 13 */
+ "CorrIntErr", /* Bit Position 14 */
+ "HeaderOF", /* Bit Position 15 */
};
-static const char *aer_uncorrectable_error_string[] = {
+static const char *aer_uncorrectable_error_string[AER_MAX_TYPEOF_UNCOR_ERRS] = {
"Undefined", /* Bit Position 0 */
NULL,
NULL,
NULL,
- "Data Link Protocol", /* Bit Position 4 */
- "Surprise Down Error", /* Bit Position 5 */
+ "DLP", /* Bit Position 4 */
+ "SDES", /* Bit Position 5 */
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
- "Poisoned TLP", /* Bit Position 12 */
- "Flow Control Protocol", /* Bit Position 13 */
- "Completion Timeout", /* Bit Position 14 */
- "Completer Abort", /* Bit Position 15 */
- "Unexpected Completion", /* Bit Position 16 */
- "Receiver Overflow", /* Bit Position 17 */
- "Malformed TLP", /* Bit Position 18 */
+ "TLP", /* Bit Position 12 */
+ "FCP", /* Bit Position 13 */
+ "CmpltTO", /* Bit Position 14 */
+ "CmpltAbrt", /* Bit Position 15 */
+ "UnxCmplt", /* Bit Position 16 */
+ "RxOF", /* Bit Position 17 */
+ "MalfTLP", /* Bit Position 18 */
"ECRC", /* Bit Position 19 */
- "Unsupported Request", /* Bit Position 20 */
- "ACS Violation", /* Bit Position 21 */
- "Uncorrectable Internal Error", /* Bit Position 22 */
- "MC Blocked TLP", /* Bit Position 23 */
- "AtomicOp Egress Blocked", /* Bit Position 24 */
- "TLP Prefix Blocked Error", /* Bit Position 25 */
+ "UnsupReq", /* Bit Position 20 */
+ "ACSViol", /* Bit Position 21 */
+ "UncorrIntErr", /* Bit Position 22 */
+ "BlockedTLP", /* Bit Position 23 */
+ "AtomicOpBlocked", /* Bit Position 24 */
+ "TLPBlockedErr", /* Bit Position 25 */
};
static const char *aer_agent_string[] = {
@@ -513,6 +583,144 @@
"Transmitter ID"
};
+#define aer_stats_dev_attr(name, stats_array, strings_array, \
+ total_string, total_field) \
+ static ssize_t \
+ name##_show(struct device *dev, struct device_attribute *attr, \
+ char *buf) \
+{ \
+ unsigned int i; \
+ char *str = buf; \
+ struct pci_dev *pdev = to_pci_dev(dev); \
+ u64 *stats = pdev->aer_stats->stats_array; \
+ \
+ for (i = 0; i < ARRAY_SIZE(strings_array); i++) { \
+ if (strings_array[i]) \
+ str += sprintf(str, "%s %llu\n", \
+ strings_array[i], stats[i]); \
+ else if (stats[i]) \
+ str += sprintf(str, #stats_array "_bit[%d] %llu\n",\
+ i, stats[i]); \
+ } \
+ str += sprintf(str, "TOTAL_%s %llu\n", total_string, \
+ pdev->aer_stats->total_field); \
+ return str-buf; \
+} \
+static DEVICE_ATTR_RO(name)
+
+aer_stats_dev_attr(aer_dev_correctable, dev_cor_errs,
+ aer_correctable_error_string, "ERR_COR",
+ dev_total_cor_errs);
+aer_stats_dev_attr(aer_dev_fatal, dev_fatal_errs,
+ aer_uncorrectable_error_string, "ERR_FATAL",
+ dev_total_fatal_errs);
+aer_stats_dev_attr(aer_dev_nonfatal, dev_nonfatal_errs,
+ aer_uncorrectable_error_string, "ERR_NONFATAL",
+ dev_total_nonfatal_errs);
+
+#define aer_stats_rootport_attr(name, field) \
+ static ssize_t \
+ name##_show(struct device *dev, struct device_attribute *attr, \
+ char *buf) \
+{ \
+ struct pci_dev *pdev = to_pci_dev(dev); \
+ return sprintf(buf, "%llu\n", pdev->aer_stats->field); \
+} \
+static DEVICE_ATTR_RO(name)
+
+aer_stats_rootport_attr(aer_rootport_total_err_cor,
+ rootport_total_cor_errs);
+aer_stats_rootport_attr(aer_rootport_total_err_fatal,
+ rootport_total_fatal_errs);
+aer_stats_rootport_attr(aer_rootport_total_err_nonfatal,
+ rootport_total_nonfatal_errs);
+
+static struct attribute *aer_stats_attrs[] __ro_after_init = {
+ &dev_attr_aer_dev_correctable.attr,
+ &dev_attr_aer_dev_fatal.attr,
+ &dev_attr_aer_dev_nonfatal.attr,
+ &dev_attr_aer_rootport_total_err_cor.attr,
+ &dev_attr_aer_rootport_total_err_fatal.attr,
+ &dev_attr_aer_rootport_total_err_nonfatal.attr,
+ NULL
+};
+
+static umode_t aer_stats_attrs_are_visible(struct kobject *kobj,
+ struct attribute *a, int n)
+{
+ struct device *dev = kobj_to_dev(kobj);
+ struct pci_dev *pdev = to_pci_dev(dev);
+
+ if (!pdev->aer_stats)
+ return 0;
+
+ if ((a == &dev_attr_aer_rootport_total_err_cor.attr ||
+ a == &dev_attr_aer_rootport_total_err_fatal.attr ||
+ a == &dev_attr_aer_rootport_total_err_nonfatal.attr) &&
+ pci_pcie_type(pdev) != PCI_EXP_TYPE_ROOT_PORT)
+ return 0;
+
+ return a->mode;
+}
+
+const struct attribute_group aer_stats_attr_group = {
+ .attrs = aer_stats_attrs,
+ .is_visible = aer_stats_attrs_are_visible,
+};
+
+static void pci_dev_aer_stats_incr(struct pci_dev *pdev,
+ struct aer_err_info *info)
+{
+ int status, i, max = -1;
+ u64 *counter = NULL;
+ struct aer_stats *aer_stats = pdev->aer_stats;
+
+ if (!aer_stats)
+ return;
+
+ switch (info->severity) {
+ case AER_CORRECTABLE:
+ aer_stats->dev_total_cor_errs++;
+ counter = &aer_stats->dev_cor_errs[0];
+ max = AER_MAX_TYPEOF_COR_ERRS;
+ break;
+ case AER_NONFATAL:
+ aer_stats->dev_total_nonfatal_errs++;
+ counter = &aer_stats->dev_nonfatal_errs[0];
+ max = AER_MAX_TYPEOF_UNCOR_ERRS;
+ break;
+ case AER_FATAL:
+ aer_stats->dev_total_fatal_errs++;
+ counter = &aer_stats->dev_fatal_errs[0];
+ max = AER_MAX_TYPEOF_UNCOR_ERRS;
+ break;
+ }
+
+ status = (info->status & ~info->mask);
+ for (i = 0; i < max; i++)
+ if (status & (1 << i))
+ counter[i]++;
+}
+
+static void pci_rootport_aer_stats_incr(struct pci_dev *pdev,
+ struct aer_err_source *e_src)
+{
+ struct aer_stats *aer_stats = pdev->aer_stats;
+
+ if (!aer_stats)
+ return;
+
+ if (e_src->status & PCI_ERR_ROOT_COR_RCV)
+ aer_stats->rootport_total_cor_errs++;
+
+ if (e_src->status & PCI_ERR_ROOT_UNCOR_RCV) {
+ if (e_src->status & PCI_ERR_ROOT_FATAL_RCV)
+ aer_stats->rootport_total_fatal_errs++;
+ else
+ aer_stats->rootport_total_nonfatal_errs++;
+ }
+}
+
static void __print_tlp_header(struct pci_dev *dev,
struct aer_header_log_regs *t)
{
@@ -545,9 +753,10 @@
pci_err(dev, " [%2d] Unknown Error Bit%s\n",
i, info->first_error == i ? " (First)" : "");
}
+ pci_dev_aer_stats_incr(dev, info);
}
-static void aer_print_error(struct pci_dev *dev, struct aer_err_info *info)
+void aer_print_error(struct pci_dev *dev, struct aer_err_info *info)
{
int layer, agent;
int id = ((dev->bus->number << 8) | dev->devfn);
@@ -799,6 +1008,7 @@
if (pos)
pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS,
info->status);
+ pci_aer_clear_device_status(dev);
} else if (info->severity == AER_NONFATAL)
pcie_do_nonfatal_recovery(dev);
else if (info->severity == AER_FATAL)
@@ -876,7 +1086,7 @@
#endif
/**
- * get_device_error_info - read error status from dev and store it to info
+ * aer_get_device_error_info - read error status from dev and store it to info
* @dev: pointer to the device expected to have a error record
* @info: pointer to structure to store the error record
*
@@ -884,7 +1094,7 @@
*
* Note that @info is reused among all error devices. Clear fields properly.
*/
-static int get_device_error_info(struct pci_dev *dev, struct aer_err_info *info)
+int aer_get_device_error_info(struct pci_dev *dev, struct aer_err_info *info)
{
int pos, temp;
@@ -942,11 +1152,11 @@
/* Report all before handle them, not to lost records by reset etc. */
for (i = 0; i < e_info->error_dev_num && e_info->dev[i]; i++) {
- if (get_device_error_info(e_info->dev[i], e_info))
+ if (aer_get_device_error_info(e_info->dev[i], e_info))
aer_print_error(e_info->dev[i], e_info);
}
for (i = 0; i < e_info->error_dev_num && e_info->dev[i]; i++) {
- if (get_device_error_info(e_info->dev[i], e_info))
+ if (aer_get_device_error_info(e_info->dev[i], e_info))
handle_error_source(e_info->dev[i], e_info);
}
}
@@ -962,6 +1172,8 @@
struct pci_dev *pdev = rpc->rpd;
struct aer_err_info *e_info = &rpc->e_info;
+ pci_rootport_aer_stats_incr(pdev, e_src);
+
/*
* There is a possibility that both correctable error and
* uncorrectable error being logged. Report correctable error first.
@@ -1305,6 +1517,7 @@
{
u32 reg32;
int pos;
+ int rc;
pos = dev->aer_cap;
@@ -1313,7 +1526,7 @@
reg32 &= ~ROOT_PORT_INTR_ON_MESG_MASK;
pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, reg32);
- pci_reset_bridge_secondary_bus(dev);
+ rc = pci_bridge_secondary_bus_reset(dev);
pci_printk(KERN_DEBUG, dev, "Root Port link has been reset\n");
/* Clear Root Error Status */
@@ -1325,7 +1538,7 @@
reg32 |= ROOT_PORT_INTR_ON_MESG_MASK;
pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, reg32);
- return PCI_ERS_RESULT_RECOVERED;
+ return rc ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_RECOVERED;
}
/**
@@ -1336,20 +1549,8 @@
*/
static void aer_error_resume(struct pci_dev *dev)
{
- int pos;
- u32 status, mask;
- u16 reg16;
-
- /* Clean up Root device status */
- pcie_capability_read_word(dev, PCI_EXP_DEVSTA, ®16);
- pcie_capability_write_word(dev, PCI_EXP_DEVSTA, reg16);
-
- /* Clean AER Root Error Status */
- pos = dev->aer_cap;
- pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status);
- pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &mask);
- status &= ~mask; /* Clear corresponding nonfatal bits */
- pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, status);
+ pci_aer_clear_device_status(dev);
+ pci_cleanup_aer_uncorrect_error_status(dev);
}
static struct pcie_port_service_driver aerdriver = {
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index c687c81..53269167 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -1127,11 +1127,9 @@
if (aspm_disabled)
return -EPERM;
- for (i = 0; i < ARRAY_SIZE(policy_str); i++)
- if (!strncmp(val, policy_str[i], strlen(policy_str[i])))
- break;
- if (i >= ARRAY_SIZE(policy_str))
- return -EINVAL;
+ i = sysfs_match_string(policy_str, val);
+ if (i < 0)
+ return i;
if (i == aspm_policy)
return 0;
diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
index 921ed97..f03279f 100644
--- a/drivers/pci/pcie/dpc.c
+++ b/drivers/pci/pcie/dpc.c
@@ -6,6 +6,7 @@
* Copyright (C) 2016 Intel Corp.
*/
+#include <linux/aer.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/init.h>
@@ -16,10 +17,8 @@
struct dpc_dev {
struct pcie_device *dev;
- struct work_struct work;
u16 cap_pos;
bool rp_extensions;
- u32 rp_pio_status;
u8 rp_log_size;
};
@@ -65,19 +64,13 @@
return 0;
}
-static void dpc_wait_link_inactive(struct dpc_dev *dpc)
-{
- struct pci_dev *pdev = dpc->dev->port;
-
- pcie_wait_for_link(pdev, false);
-}
-
static pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
{
struct dpc_dev *dpc;
struct pcie_device *pciedev;
struct device *devdpc;
- u16 cap, ctl;
+
+ u16 cap;
/*
* DPC disables the Link automatically in hardware, so it has
@@ -92,34 +85,17 @@
* Wait until the Link is inactive, then clear DPC Trigger Status
* to allow the Port to leave DPC.
*/
- dpc_wait_link_inactive(dpc);
+ pcie_wait_for_link(pdev, false);
if (dpc->rp_extensions && dpc_wait_rp_inactive(dpc))
return PCI_ERS_RESULT_DISCONNECT;
- if (dpc->rp_extensions && dpc->rp_pio_status) {
- pci_write_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_STATUS,
- dpc->rp_pio_status);
- dpc->rp_pio_status = 0;
- }
pci_write_config_word(pdev, cap + PCI_EXP_DPC_STATUS,
PCI_EXP_DPC_STATUS_TRIGGER);
- pci_read_config_word(pdev, cap + PCI_EXP_DPC_CTL, &ctl);
- pci_write_config_word(pdev, cap + PCI_EXP_DPC_CTL,
- ctl | PCI_EXP_DPC_CTL_INT_EN);
-
return PCI_ERS_RESULT_RECOVERED;
}
-static void dpc_work(struct work_struct *work)
-{
- struct dpc_dev *dpc = container_of(work, struct dpc_dev, work);
- struct pci_dev *pdev = dpc->dev->port;
-
- /* We configure DPC so it only triggers on ERR_FATAL */
- pcie_do_fatal_recovery(pdev, PCIE_PORT_SERVICE_DPC);
-}
static void dpc_process_rp_pio_error(struct dpc_dev *dpc)
{
@@ -134,8 +110,6 @@
dev_err(dev, "rp_pio_status: %#010x, rp_pio_mask: %#010x\n",
status, mask);
- dpc->rp_pio_status = status;
-
pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_SEVERITY, &sev);
pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_SYSERROR, &syserr);
pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_EXCEPTION, &exc);
@@ -146,15 +120,14 @@
pci_read_config_word(pdev, cap + PCI_EXP_DPC_STATUS, &dpc_status);
first_error = (dpc_status & 0x1f00) >> 8;
- status &= ~mask;
for (i = 0; i < ARRAY_SIZE(rp_pio_error_string); i++) {
- if (status & (1 << i))
+ if ((status & ~mask) & (1 << i))
dev_err(dev, "[%2d] %s%s\n", i, rp_pio_error_string[i],
first_error == i ? " (First)" : "");
}
if (dpc->rp_log_size < 4)
- return;
+ goto clear_status;
pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_HEADER_LOG,
&dw0);
pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_HEADER_LOG + 4,
@@ -167,7 +140,7 @@
dw0, dw1, dw2, dw3);
if (dpc->rp_log_size < 5)
- return;
+ goto clear_status;
pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_IMPSPEC_LOG, &log);
dev_err(dev, "RP PIO ImpSpec Log %#010x\n", log);
@@ -176,43 +149,26 @@
cap + PCI_EXP_DPC_RP_PIO_TLPPREFIX_LOG, &prefix);
dev_err(dev, "TLP Prefix Header: dw%d, %#010x\n", i, prefix);
}
+ clear_status:
+ pci_write_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_STATUS, status);
}
-static irqreturn_t dpc_irq(int irq, void *context)
+static irqreturn_t dpc_handler(int irq, void *context)
{
- struct dpc_dev *dpc = (struct dpc_dev *)context;
+ struct aer_err_info info;
+ struct dpc_dev *dpc = context;
struct pci_dev *pdev = dpc->dev->port;
struct device *dev = &dpc->dev->device;
- u16 cap = dpc->cap_pos, ctl, status, source, reason, ext_reason;
-
- pci_read_config_word(pdev, cap + PCI_EXP_DPC_CTL, &ctl);
-
- if (!(ctl & PCI_EXP_DPC_CTL_INT_EN) || ctl == (u16)(~0))
- return IRQ_NONE;
+ u16 cap = dpc->cap_pos, status, source, reason, ext_reason;
pci_read_config_word(pdev, cap + PCI_EXP_DPC_STATUS, &status);
-
- if (!(status & PCI_EXP_DPC_STATUS_INTERRUPT))
- return IRQ_NONE;
-
- if (!(status & PCI_EXP_DPC_STATUS_TRIGGER)) {
- pci_write_config_word(pdev, cap + PCI_EXP_DPC_STATUS,
- PCI_EXP_DPC_STATUS_INTERRUPT);
- return IRQ_HANDLED;
- }
-
- pci_write_config_word(pdev, cap + PCI_EXP_DPC_CTL,
- ctl & ~PCI_EXP_DPC_CTL_INT_EN);
-
- pci_read_config_word(pdev, cap + PCI_EXP_DPC_SOURCE_ID,
- &source);
+ pci_read_config_word(pdev, cap + PCI_EXP_DPC_SOURCE_ID, &source);
dev_info(dev, "DPC containment event, status:%#06x source:%#06x\n",
- status, source);
+ status, source);
reason = (status & PCI_EXP_DPC_STATUS_TRIGGER_RSN) >> 1;
ext_reason = (status & PCI_EXP_DPC_STATUS_TRIGGER_RSN_EXT) >> 5;
-
dev_warn(dev, "DPC %s detected, remove downstream devices\n",
(reason == 0) ? "unmasked uncorrectable error" :
(reason == 1) ? "ERR_NONFATAL" :
@@ -220,15 +176,36 @@
(ext_reason == 0) ? "RP PIO error" :
(ext_reason == 1) ? "software trigger" :
"reserved error");
+
/* show RP PIO error detail information */
if (dpc->rp_extensions && reason == 3 && ext_reason == 0)
dpc_process_rp_pio_error(dpc);
+ else if (reason == 0 && aer_get_device_error_info(pdev, &info)) {
+ aer_print_error(pdev, &info);
+ pci_cleanup_aer_uncorrect_error_status(pdev);
+ }
+
+ /* We configure DPC so it only triggers on ERR_FATAL */
+ pcie_do_fatal_recovery(pdev, PCIE_PORT_SERVICE_DPC);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t dpc_irq(int irq, void *context)
+{
+ struct dpc_dev *dpc = (struct dpc_dev *)context;
+ struct pci_dev *pdev = dpc->dev->port;
+ u16 cap = dpc->cap_pos, status;
+
+ pci_read_config_word(pdev, cap + PCI_EXP_DPC_STATUS, &status);
+
+ if (!(status & PCI_EXP_DPC_STATUS_INTERRUPT) || status == (u16)(~0))
+ return IRQ_NONE;
pci_write_config_word(pdev, cap + PCI_EXP_DPC_STATUS,
PCI_EXP_DPC_STATUS_INTERRUPT);
-
- schedule_work(&dpc->work);
-
+ if (status & PCI_EXP_DPC_STATUS_TRIGGER)
+ return IRQ_WAKE_THREAD;
return IRQ_HANDLED;
}
@@ -250,11 +227,11 @@
dpc->cap_pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_DPC);
dpc->dev = dev;
- INIT_WORK(&dpc->work, dpc_work);
set_service_data(dev, dpc);
- status = devm_request_irq(device, dev->irq, dpc_irq, IRQF_SHARED,
- "pcie-dpc", dpc);
+ status = devm_request_threaded_irq(device, dev->irq, dpc_irq,
+ dpc_handler, IRQF_SHARED,
+ "pcie-dpc", dpc);
if (status) {
dev_warn(device, "request IRQ%d failed: %d\n", dev->irq,
status);
diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
index f7ce0cb..708fd3a 100644
--- a/drivers/pci/pcie/err.c
+++ b/drivers/pci/pcie/err.c
@@ -175,9 +175,11 @@
*/
static pci_ers_result_t default_reset_link(struct pci_dev *dev)
{
- pci_reset_bridge_secondary_bus(dev);
+ int rc;
+
+ rc = pci_bridge_secondary_bus_reset(dev);
pci_printk(KERN_DEBUG, dev, "downstream link has been reset\n");
- return PCI_ERS_RESULT_RECOVERED;
+ return rc ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_RECOVERED;
}
static pci_ers_result_t reset_link(struct pci_dev *dev, u32 service)
@@ -252,6 +254,7 @@
dev->error_state = state;
pci_walk_bus(dev->subordinate, cb, &result_data);
if (cb == report_resume) {
+ pci_aer_clear_device_status(dev);
pci_cleanup_aer_uncorrect_error_status(dev);
dev->error_state = pci_channel_io_normal;
}
@@ -259,15 +262,10 @@
/*
* If the error is reported by an end point, we think this
* error is related to the upstream link of the end point.
+ * The error is non fatal so the bus is ok; just invoke
+ * the callback for the function that logged the error.
*/
- if (state == pci_channel_io_normal)
- /*
- * the error is non fatal so the bus is ok, just invoke
- * the callback for the function that logged the error.
- */
- cb(dev, &result_data);
- else
- pci_walk_bus(dev->bus, cb, &result_data);
+ cb(dev, &result_data);
}
return result_data.result;
@@ -295,6 +293,7 @@
parent = udev->subordinate;
pci_lock_rescan_remove();
+ pci_dev_get(dev);
list_for_each_entry_safe_reverse(pdev, temp, &parent->devices,
bus_list) {
pci_dev_get(pdev);
@@ -316,7 +315,8 @@
* do error recovery on all subordinates of the bridge instead
* of the bridge and clear the error status of the bridge.
*/
- pci_cleanup_aer_uncorrect_error_status(dev);
+ pci_aer_clear_fatal_status(dev);
+ pci_aer_clear_device_status(dev);
}
if (result == PCI_ERS_RESULT_RECOVERED) {
@@ -328,6 +328,7 @@
pci_info(dev, "Device recovery from fatal error failed\n");
}
+ pci_dev_put(dev);
pci_unlock_rescan_remove();
}
diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h
index 6ffc797..d59afa4 100644
--- a/drivers/pci/pcie/portdrv.h
+++ b/drivers/pci/pcie/portdrv.h
@@ -50,6 +50,7 @@
int (*probe) (struct pcie_device *dev);
void (*remove) (struct pcie_device *dev);
int (*suspend) (struct pcie_device *dev);
+ int (*resume_noirq) (struct pcie_device *dev);
int (*resume) (struct pcie_device *dev);
/* Device driver may resume normal operations */
@@ -82,6 +83,7 @@
int pcie_port_device_register(struct pci_dev *dev);
#ifdef CONFIG_PM
int pcie_port_device_suspend(struct device *dev);
+int pcie_port_device_resume_noirq(struct device *dev);
int pcie_port_device_resume(struct device *dev);
#endif
void pcie_port_device_remove(struct pci_dev *dev);
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index e0261ad..7c37d81 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -353,14 +353,19 @@
}
#ifdef CONFIG_PM
-static int suspend_iter(struct device *dev, void *data)
+typedef int (*pcie_pm_callback_t)(struct pcie_device *);
+
+static int pm_iter(struct device *dev, void *data)
{
struct pcie_port_service_driver *service_driver;
+ size_t offset = *(size_t *)data;
+ pcie_pm_callback_t cb;
if ((dev->bus == &pcie_port_bus_type) && dev->driver) {
service_driver = to_service_driver(dev->driver);
- if (service_driver->suspend)
- service_driver->suspend(to_pcie_device(dev));
+ cb = *(pcie_pm_callback_t *)((void *)service_driver + offset);
+ if (cb)
+ return cb(to_pcie_device(dev));
}
return 0;
}
@@ -371,20 +376,14 @@
*/
int pcie_port_device_suspend(struct device *dev)
{
- return device_for_each_child(dev, NULL, suspend_iter);
+ size_t off = offsetof(struct pcie_port_service_driver, suspend);
+ return device_for_each_child(dev, &off, pm_iter);
}
-static int resume_iter(struct device *dev, void *data)
+int pcie_port_device_resume_noirq(struct device *dev)
{
- struct pcie_port_service_driver *service_driver;
-
- if ((dev->bus == &pcie_port_bus_type) &&
- (dev->driver)) {
- service_driver = to_service_driver(dev->driver);
- if (service_driver->resume)
- service_driver->resume(to_pcie_device(dev));
- }
- return 0;
+ size_t off = offsetof(struct pcie_port_service_driver, resume_noirq);
+ return device_for_each_child(dev, &off, pm_iter);
}
/**
@@ -393,7 +392,8 @@
*/
int pcie_port_device_resume(struct device *dev)
{
- return device_for_each_child(dev, NULL, resume_iter);
+ size_t off = offsetof(struct pcie_port_service_driver, resume);
+ return device_for_each_child(dev, &off, pm_iter);
}
#endif /* PM */
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index 973f1b8..eef22dc 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -42,17 +42,6 @@
/* global data */
-static int pcie_portdrv_restore_config(struct pci_dev *dev)
-{
- int retval;
-
- retval = pci_enable_device(dev);
- if (retval)
- return retval;
- pci_set_master(dev);
- return 0;
-}
-
#ifdef CONFIG_PM
static int pcie_port_runtime_suspend(struct device *dev)
{
@@ -76,10 +65,12 @@
static const struct dev_pm_ops pcie_portdrv_pm_ops = {
.suspend = pcie_port_device_suspend,
+ .resume_noirq = pcie_port_device_resume_noirq,
.resume = pcie_port_device_resume,
.freeze = pcie_port_device_suspend,
.thaw = pcie_port_device_resume,
.poweroff = pcie_port_device_suspend,
+ .restore_noirq = pcie_port_device_resume_noirq,
.restore = pcie_port_device_resume,
.runtime_suspend = pcie_port_runtime_suspend,
.runtime_resume = pcie_port_runtime_resume,
@@ -160,19 +151,6 @@
return PCI_ERS_RESULT_RECOVERED;
}
-static pci_ers_result_t pcie_portdrv_slot_reset(struct pci_dev *dev)
-{
- /* If fatal, restore cfg space for possible link reset at upstream */
- if (dev->error_state == pci_channel_io_frozen) {
- dev->state_saved = true;
- pci_restore_state(dev);
- pcie_portdrv_restore_config(dev);
- pci_enable_pcie_error_reporting(dev);
- }
-
- return PCI_ERS_RESULT_RECOVERED;
-}
-
static int resume_iter(struct device *device, void *data)
{
struct pcie_device *pcie_device;
@@ -208,7 +186,6 @@
static const struct pci_error_handlers pcie_portdrv_err_handler = {
.error_detected = pcie_portdrv_error_detected,
.mmio_enabled = pcie_portdrv_mmio_enabled,
- .slot_reset = pcie_portdrv_slot_reset,
.resume = pcie_portdrv_err_resume,
};
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index ac876e3..ec78400 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -13,7 +13,6 @@
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/cpumask.h>
-#include <linux/pci-aspm.h>
#include <linux/aer.h>
#include <linux/acpi.h>
#include <linux/hypervisor.h>
@@ -1549,6 +1548,20 @@
return 0;
}
+static void early_dump_pci_device(struct pci_dev *pdev)
+{
+ u32 value[256 / 4];
+ int i;
+
+ pci_info(pdev, "config space:\n");
+
+ for (i = 0; i < 256; i += 4)
+ pci_read_config_dword(pdev, i, &value[i / 4]);
+
+ print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1,
+ value, 256, false);
+}
+
/**
* pci_setup_device - Fill in class and map information of a device
* @dev: the device structure to fill
@@ -1598,6 +1611,9 @@
pci_printk(KERN_DEBUG, dev, "[%04x:%04x] type %02x class %#08x\n",
dev->vendor, dev->device, dev->hdr_type, dev->class);
+ if (pci_early_dump)
+ early_dump_pci_device(dev);
+
/* Need to have dev->class ready */
dev->cfg_size = pci_cfg_space_size(dev);
@@ -1725,11 +1741,15 @@
static void pci_configure_mps(struct pci_dev *dev)
{
struct pci_dev *bridge = pci_upstream_bridge(dev);
- int mps, p_mps, rc;
+ int mps, mpss, p_mps, rc;
if (!pci_is_pcie(dev) || !bridge || !pci_is_pcie(bridge))
return;
+ /* MPS and MRRS fields are of type 'RsvdP' for VFs, short-circuit out */
+ if (dev->is_virtfn)
+ return;
+
mps = pcie_get_mps(dev);
p_mps = pcie_get_mps(bridge);
@@ -1749,6 +1769,14 @@
if (pcie_bus_config != PCIE_BUS_DEFAULT)
return;
+ mpss = 128 << dev->pcie_mpss;
+ if (mpss < p_mps && pci_pcie_type(bridge) == PCI_EXP_TYPE_ROOT_PORT) {
+ pcie_set_mps(bridge, mpss);
+ pci_info(dev, "Upstream bridge's Max Payload Size set to %d (was %d, max %d)\n",
+ mpss, p_mps, 128 << bridge->pcie_mpss);
+ p_mps = pcie_get_mps(bridge);
+ }
+
rc = pcie_set_mps(dev, p_mps);
if (rc) {
pci_warn(dev, "can't set Max Payload Size to %d; if necessary, use \"pci=pcie_bus_safe\" and report a bug\n",
@@ -1757,7 +1785,7 @@
}
pci_info(dev, "Max Payload Size set to %d (was %d, max %d)\n",
- p_mps, mps, 128 << dev->pcie_mpss);
+ p_mps, mps, mpss);
}
static struct hpp_type0 pci_default_type0 = {
@@ -2042,6 +2070,29 @@
#endif
}
+static void pci_configure_eetlp_prefix(struct pci_dev *dev)
+{
+#ifdef CONFIG_PCI_PASID
+ struct pci_dev *bridge;
+ u32 cap;
+
+ if (!pci_is_pcie(dev))
+ return;
+
+ pcie_capability_read_dword(dev, PCI_EXP_DEVCAP2, &cap);
+ if (!(cap & PCI_EXP_DEVCAP2_EE_PREFIX))
+ return;
+
+ if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT)
+ dev->eetlp_prefix_path = 1;
+ else {
+ bridge = pci_upstream_bridge(dev);
+ if (bridge && bridge->eetlp_prefix_path)
+ dev->eetlp_prefix_path = 1;
+ }
+#endif
+}
+
static void pci_configure_device(struct pci_dev *dev)
{
struct hotplug_params hpp;
@@ -2051,6 +2102,7 @@
pci_configure_extended_tags(dev, NULL);
pci_configure_relaxed_ordering(dev);
pci_configure_ltr(dev);
+ pci_configure_eetlp_prefix(dev);
memset(&hpp, 0, sizeof(hpp));
ret = pci_get_hp_params(dev, &hpp);
@@ -2064,6 +2116,7 @@
static void pci_release_capabilities(struct pci_dev *dev)
{
+ pci_aer_exit(dev);
pci_vpd_release(dev);
pci_iov_release(dev);
pci_free_cap_save_buffers(dev);
@@ -2156,8 +2209,8 @@
return true;
}
-bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l,
- int timeout)
+bool pci_bus_generic_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l,
+ int timeout)
{
if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l))
return false;
@@ -2172,6 +2225,24 @@
return true;
}
+
+bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l,
+ int timeout)
+{
+#ifdef CONFIG_PCI_QUIRKS
+ struct pci_dev *bridge = bus->self;
+
+ /*
+ * Certain IDT switches have an issue where they improperly trigger
+ * ACS Source Validation errors on completions for config reads.
+ */
+ if (bridge && bridge->vendor == PCI_VENDOR_ID_IDT &&
+ bridge->device == 0x80b5)
+ return pci_idt_bus_quirk(bus, devfn, l, timeout);
+#endif
+
+ return pci_bus_generic_read_dev_vendor_id(bus, devfn, l, timeout);
+}
EXPORT_SYMBOL(pci_bus_read_dev_vendor_id);
/*
@@ -2205,6 +2276,25 @@
return dev;
}
+static void pcie_report_downtraining(struct pci_dev *dev)
+{
+ if (!pci_is_pcie(dev))
+ return;
+
+ /* Look from the device up to avoid downstream ports with no devices */
+ if ((pci_pcie_type(dev) != PCI_EXP_TYPE_ENDPOINT) &&
+ (pci_pcie_type(dev) != PCI_EXP_TYPE_LEG_END) &&
+ (pci_pcie_type(dev) != PCI_EXP_TYPE_UPSTREAM))
+ return;
+
+ /* Multi-function PCIe devices share the same link/status */
+ if (PCI_FUNC(dev->devfn) != 0 || dev->is_virtfn)
+ return;
+
+ /* Print link status only if the device is constrained by the fabric */
+ __pcie_print_link_status(dev, false);
+}
+
static void pci_init_capabilities(struct pci_dev *dev)
{
/* Enhanced Allocation */
@@ -2240,6 +2330,8 @@
/* Advanced Error Reporting */
pci_aer_init(dev);
+ pcie_report_downtraining(dev);
+
if (pci_probe_reset_function(dev) == 0)
dev->reset_fn = 1;
}
@@ -2433,13 +2525,13 @@
dev = pci_scan_single_device(bus, devfn);
if (!dev)
return 0;
- if (!dev->is_added)
+ if (!pci_dev_is_added(dev))
nr++;
for (fn = next_fn(bus, dev, 0); fn > 0; fn = next_fn(bus, dev, fn)) {
dev = pci_scan_single_device(bus, devfn + fn);
if (dev) {
- if (!dev->is_added)
+ if (!pci_dev_is_added(dev))
nr++;
dev->multifunction = 1;
}
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 8bf68e6..46f58a9 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -25,8 +25,10 @@
#include <linux/sched.h>
#include <linux/ktime.h>
#include <linux/mm.h>
+#include <linux/nvme.h>
#include <linux/platform_data/x86/apple.h>
#include <linux/pm_runtime.h>
+#include <linux/switchtec.h>
#include <asm/dma.h> /* isa_dma_bridge_buggy */
#include "pci.h"
@@ -460,6 +462,7 @@
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP4000, quirk_nfp6000);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP6000, quirk_nfp6000);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP5000, quirk_nfp6000);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP6000_VF, quirk_nfp6000);
/* On IBM Crocodile ipr SAS adapters, expand BAR to system page size */
@@ -2105,6 +2108,7 @@
if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
dev->subsystem_device == 0x0299)
return;
+ /* else: fall through */
case PCI_DEVICE_ID_NETMOS_9735:
case PCI_DEVICE_ID_NETMOS_9745:
case PCI_DEVICE_ID_NETMOS_9845:
@@ -3667,6 +3671,108 @@
#define PCI_DEVICE_ID_INTEL_IVB_M_VGA 0x0156
#define PCI_DEVICE_ID_INTEL_IVB_M2_VGA 0x0166
+/*
+ * The Samsung SM961/PM961 controller can sometimes enter a fatal state after
+ * FLR where config space reads from the device return -1. We seem to be
+ * able to avoid this condition if we disable the NVMe controller prior to
+ * FLR. This quirk is generic for any NVMe class device requiring similar
+ * assistance to quiesce the device prior to FLR.
+ *
+ * NVMe specification: https://nvmexpress.org/resources/specifications/
+ * Revision 1.0e:
+ * Chapter 2: Required and optional PCI config registers
+ * Chapter 3: NVMe control registers
+ * Chapter 7.3: Reset behavior
+ */
+static int nvme_disable_and_flr(struct pci_dev *dev, int probe)
+{
+ void __iomem *bar;
+ u16 cmd;
+ u32 cfg;
+
+ if (dev->class != PCI_CLASS_STORAGE_EXPRESS ||
+ !pcie_has_flr(dev) || !pci_resource_start(dev, 0))
+ return -ENOTTY;
+
+ if (probe)
+ return 0;
+
+ bar = pci_iomap(dev, 0, NVME_REG_CC + sizeof(cfg));
+ if (!bar)
+ return -ENOTTY;
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ pci_write_config_word(dev, PCI_COMMAND, cmd | PCI_COMMAND_MEMORY);
+
+ cfg = readl(bar + NVME_REG_CC);
+
+ /* Disable controller if enabled */
+ if (cfg & NVME_CC_ENABLE) {
+ u32 cap = readl(bar + NVME_REG_CAP);
+ unsigned long timeout;
+
+ /*
+ * Per nvme_disable_ctrl() skip shutdown notification as it
+ * could complete commands to the admin queue. We only intend
+ * to quiesce the device before reset.
+ */
+ cfg &= ~(NVME_CC_SHN_MASK | NVME_CC_ENABLE);
+
+ writel(cfg, bar + NVME_REG_CC);
+
+ /*
+ * Some controllers require an additional delay here, see
+ * NVME_QUIRK_DELAY_BEFORE_CHK_RDY. None of those are yet
+ * supported by this quirk.
+ */
+
+ /* Cap register provides max timeout in 500ms increments */
+ timeout = ((NVME_CAP_TIMEOUT(cap) + 1) * HZ / 2) + jiffies;
+
+ for (;;) {
+ u32 status = readl(bar + NVME_REG_CSTS);
+
+ /* Ready status becomes zero on disable complete */
+ if (!(status & NVME_CSTS_RDY))
+ break;
+
+ msleep(100);
+
+ if (time_after(jiffies, timeout)) {
+ pci_warn(dev, "Timeout waiting for NVMe ready status to clear after disable\n");
+ break;
+ }
+ }
+ }
+
+ pci_iounmap(dev, bar);
+
+ pcie_flr(dev);
+
+ return 0;
+}
+
+/*
+ * Intel DC P3700 NVMe controller will timeout waiting for ready status
+ * to change after NVMe enable if the driver starts interacting with the
+ * device too soon after FLR. A 250ms delay after FLR has heuristically
+ * proven to produce reliably working results for device assignment cases.
+ */
+static int delay_250ms_after_flr(struct pci_dev *dev, int probe)
+{
+ if (!pcie_has_flr(dev))
+ return -ENOTTY;
+
+ if (probe)
+ return 0;
+
+ pcie_flr(dev);
+
+ msleep(250);
+
+ return 0;
+}
+
static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF,
reset_intel_82599_sfp_virtfn },
@@ -3674,6 +3780,8 @@
reset_ivb_igd },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IVB_M2_VGA,
reset_ivb_igd },
+ { PCI_VENDOR_ID_SAMSUNG, 0xa804, nvme_disable_and_flr },
+ { PCI_VENDOR_ID_INTEL, 0x0953, delay_250ms_after_flr },
{ PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID,
reset_chelsio_generic_dev },
{ 0 }
@@ -3743,6 +3851,9 @@
/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c78 */
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9182,
quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c134 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9183,
+ quirk_dma_func1_alias);
/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c46 */
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x91a0,
quirk_dma_func1_alias);
@@ -4556,27 +4667,79 @@
return 0;
}
-static const struct pci_dev_enable_acs {
+static int pci_quirk_disable_intel_spt_pch_acs_redir(struct pci_dev *dev)
+{
+ int pos;
+ u32 cap, ctrl;
+
+ if (!pci_quirk_intel_spt_pch_acs_match(dev))
+ return -ENOTTY;
+
+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ACS);
+ if (!pos)
+ return -ENOTTY;
+
+ pci_read_config_dword(dev, pos + PCI_ACS_CAP, &cap);
+ pci_read_config_dword(dev, pos + INTEL_SPT_ACS_CTRL, &ctrl);
+
+ ctrl &= ~(PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_EC);
+
+ pci_write_config_dword(dev, pos + INTEL_SPT_ACS_CTRL, ctrl);
+
+ pci_info(dev, "Intel SPT PCH root port workaround: disabled ACS redirect\n");
+
+ return 0;
+}
+
+static const struct pci_dev_acs_ops {
u16 vendor;
u16 device;
int (*enable_acs)(struct pci_dev *dev);
-} pci_dev_enable_acs[] = {
- { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_enable_intel_pch_acs },
- { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_enable_intel_spt_pch_acs },
- { 0 }
+ int (*disable_acs_redir)(struct pci_dev *dev);
+} pci_dev_acs_ops[] = {
+ { PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
+ .enable_acs = pci_quirk_enable_intel_pch_acs,
+ },
+ { PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
+ .enable_acs = pci_quirk_enable_intel_spt_pch_acs,
+ .disable_acs_redir = pci_quirk_disable_intel_spt_pch_acs_redir,
+ },
};
int pci_dev_specific_enable_acs(struct pci_dev *dev)
{
- const struct pci_dev_enable_acs *i;
- int ret;
+ const struct pci_dev_acs_ops *p;
+ int i, ret;
- for (i = pci_dev_enable_acs; i->enable_acs; i++) {
- if ((i->vendor == dev->vendor ||
- i->vendor == (u16)PCI_ANY_ID) &&
- (i->device == dev->device ||
- i->device == (u16)PCI_ANY_ID)) {
- ret = i->enable_acs(dev);
+ for (i = 0; i < ARRAY_SIZE(pci_dev_acs_ops); i++) {
+ p = &pci_dev_acs_ops[i];
+ if ((p->vendor == dev->vendor ||
+ p->vendor == (u16)PCI_ANY_ID) &&
+ (p->device == dev->device ||
+ p->device == (u16)PCI_ANY_ID) &&
+ p->enable_acs) {
+ ret = p->enable_acs(dev);
+ if (ret >= 0)
+ return ret;
+ }
+ }
+
+ return -ENOTTY;
+}
+
+int pci_dev_specific_disable_acs_redir(struct pci_dev *dev)
+{
+ const struct pci_dev_acs_ops *p;
+ int i, ret;
+
+ for (i = 0; i < ARRAY_SIZE(pci_dev_acs_ops); i++) {
+ p = &pci_dev_acs_ops[i];
+ if ((p->vendor == dev->vendor ||
+ p->vendor == (u16)PCI_ANY_ID) &&
+ (p->device == dev->device ||
+ p->device == (u16)PCI_ANY_ID) &&
+ p->disable_acs_redir) {
+ ret = p->disable_acs_redir(dev);
if (ret >= 0)
return ret;
}
@@ -4756,3 +4919,197 @@
PCI_CLASS_MULTIMEDIA_HD_AUDIO, 8, quirk_gpu_hda);
DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
PCI_CLASS_MULTIMEDIA_HD_AUDIO, 8, quirk_gpu_hda);
+
+/*
+ * Some IDT switches incorrectly flag an ACS Source Validation error on
+ * completions for config read requests even though PCIe r4.0, sec
+ * 6.12.1.1, says that completions are never affected by ACS Source
+ * Validation. Here's the text of IDT 89H32H8G3-YC, erratum #36:
+ *
+ * Item #36 - Downstream port applies ACS Source Validation to Completions
+ * Section 6.12.1.1 of the PCI Express Base Specification 3.1 states that
+ * completions are never affected by ACS Source Validation. However,
+ * completions received by a downstream port of the PCIe switch from a
+ * device that has not yet captured a PCIe bus number are incorrectly
+ * dropped by ACS Source Validation by the switch downstream port.
+ *
+ * The workaround suggested by IDT is to issue a config write to the
+ * downstream device before issuing the first config read. This allows the
+ * downstream device to capture its bus and device numbers (see PCIe r4.0,
+ * sec 2.2.9), thus avoiding the ACS error on the completion.
+ *
+ * However, we don't know when the device is ready to accept the config
+ * write, so we do config reads until we receive a non-Config Request Retry
+ * Status, then do the config write.
+ *
+ * To avoid hitting the erratum when doing the config reads, we disable ACS
+ * SV around this process.
+ */
+int pci_idt_bus_quirk(struct pci_bus *bus, int devfn, u32 *l, int timeout)
+{
+ int pos;
+ u16 ctrl = 0;
+ bool found;
+ struct pci_dev *bridge = bus->self;
+
+ pos = pci_find_ext_capability(bridge, PCI_EXT_CAP_ID_ACS);
+
+ /* Disable ACS SV before initial config reads */
+ if (pos) {
+ pci_read_config_word(bridge, pos + PCI_ACS_CTRL, &ctrl);
+ if (ctrl & PCI_ACS_SV)
+ pci_write_config_word(bridge, pos + PCI_ACS_CTRL,
+ ctrl & ~PCI_ACS_SV);
+ }
+
+ found = pci_bus_generic_read_dev_vendor_id(bus, devfn, l, timeout);
+
+ /* Write Vendor ID (read-only) so the endpoint latches its bus/dev */
+ if (found)
+ pci_bus_write_config_word(bus, devfn, PCI_VENDOR_ID, 0);
+
+ /* Re-enable ACS_SV if it was previously enabled */
+ if (ctrl & PCI_ACS_SV)
+ pci_write_config_word(bridge, pos + PCI_ACS_CTRL, ctrl);
+
+ return found;
+}
+
+/*
+ * Microsemi Switchtec NTB uses devfn proxy IDs to move TLPs between
+ * NT endpoints via the internal switch fabric. These IDs replace the
+ * originating requestor ID TLPs which access host memory on peer NTB
+ * ports. Therefore, all proxy IDs must be aliased to the NTB device
+ * to permit access when the IOMMU is turned on.
+ */
+static void quirk_switchtec_ntb_dma_alias(struct pci_dev *pdev)
+{
+ void __iomem *mmio;
+ struct ntb_info_regs __iomem *mmio_ntb;
+ struct ntb_ctrl_regs __iomem *mmio_ctrl;
+ struct sys_info_regs __iomem *mmio_sys_info;
+ u64 partition_map;
+ u8 partition;
+ int pp;
+
+ if (pci_enable_device(pdev)) {
+ pci_err(pdev, "Cannot enable Switchtec device\n");
+ return;
+ }
+
+ mmio = pci_iomap(pdev, 0, 0);
+ if (mmio == NULL) {
+ pci_disable_device(pdev);
+ pci_err(pdev, "Cannot iomap Switchtec device\n");
+ return;
+ }
+
+ pci_info(pdev, "Setting Switchtec proxy ID aliases\n");
+
+ mmio_ntb = mmio + SWITCHTEC_GAS_NTB_OFFSET;
+ mmio_ctrl = (void __iomem *) mmio_ntb + SWITCHTEC_NTB_REG_CTRL_OFFSET;
+ mmio_sys_info = mmio + SWITCHTEC_GAS_SYS_INFO_OFFSET;
+
+ partition = ioread8(&mmio_ntb->partition_id);
+
+ partition_map = ioread32(&mmio_ntb->ep_map);
+ partition_map |= ((u64) ioread32(&mmio_ntb->ep_map + 4)) << 32;
+ partition_map &= ~(1ULL << partition);
+
+ for (pp = 0; pp < (sizeof(partition_map) * 8); pp++) {
+ struct ntb_ctrl_regs __iomem *mmio_peer_ctrl;
+ u32 table_sz = 0;
+ int te;
+
+ if (!(partition_map & (1ULL << pp)))
+ continue;
+
+ pci_dbg(pdev, "Processing partition %d\n", pp);
+
+ mmio_peer_ctrl = &mmio_ctrl[pp];
+
+ table_sz = ioread16(&mmio_peer_ctrl->req_id_table_size);
+ if (!table_sz) {
+ pci_warn(pdev, "Partition %d table_sz 0\n", pp);
+ continue;
+ }
+
+ if (table_sz > 512) {
+ pci_warn(pdev,
+ "Invalid Switchtec partition %d table_sz %d\n",
+ pp, table_sz);
+ continue;
+ }
+
+ for (te = 0; te < table_sz; te++) {
+ u32 rid_entry;
+ u8 devfn;
+
+ rid_entry = ioread32(&mmio_peer_ctrl->req_id_table[te]);
+ devfn = (rid_entry >> 1) & 0xFF;
+ pci_dbg(pdev,
+ "Aliasing Partition %d Proxy ID %02x.%d\n",
+ pp, PCI_SLOT(devfn), PCI_FUNC(devfn));
+ pci_add_dma_alias(pdev, devfn);
+ }
+ }
+
+ pci_iounmap(pdev, mmio);
+ pci_disable_device(pdev);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8531,
+ quirk_switchtec_ntb_dma_alias);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8532,
+ quirk_switchtec_ntb_dma_alias);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8533,
+ quirk_switchtec_ntb_dma_alias);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8534,
+ quirk_switchtec_ntb_dma_alias);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8535,
+ quirk_switchtec_ntb_dma_alias);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8536,
+ quirk_switchtec_ntb_dma_alias);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8543,
+ quirk_switchtec_ntb_dma_alias);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8544,
+ quirk_switchtec_ntb_dma_alias);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8545,
+ quirk_switchtec_ntb_dma_alias);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8546,
+ quirk_switchtec_ntb_dma_alias);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8551,
+ quirk_switchtec_ntb_dma_alias);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8552,
+ quirk_switchtec_ntb_dma_alias);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8553,
+ quirk_switchtec_ntb_dma_alias);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8554,
+ quirk_switchtec_ntb_dma_alias);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8555,
+ quirk_switchtec_ntb_dma_alias);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8556,
+ quirk_switchtec_ntb_dma_alias);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8561,
+ quirk_switchtec_ntb_dma_alias);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8562,
+ quirk_switchtec_ntb_dma_alias);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8563,
+ quirk_switchtec_ntb_dma_alias);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8564,
+ quirk_switchtec_ntb_dma_alias);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8565,
+ quirk_switchtec_ntb_dma_alias);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8566,
+ quirk_switchtec_ntb_dma_alias);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8571,
+ quirk_switchtec_ntb_dma_alias);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8572,
+ quirk_switchtec_ntb_dma_alias);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8573,
+ quirk_switchtec_ntb_dma_alias);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8574,
+ quirk_switchtec_ntb_dma_alias);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8575,
+ quirk_switchtec_ntb_dma_alias);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8576,
+ quirk_switchtec_ntb_dma_alias);
diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c
index 6f072ea..461e7fd2 100644
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c
@@ -1,7 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include <linux/pci.h>
#include <linux/module.h>
-#include <linux/pci-aspm.h>
#include "pci.h"
static void pci_free_resources(struct pci_dev *dev)
@@ -19,11 +18,12 @@
{
pci_pme_active(dev, false);
- if (dev->is_added) {
+ if (pci_dev_is_added(dev)) {
device_release_driver(&dev->dev);
pci_proc_detach_device(dev);
pci_remove_sysfs_dev_files(dev);
- dev->is_added = 0;
+
+ pci_dev_assign_added(dev, false);
}
if (dev->bus->self)
diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c
index a7b5c37..137bf0c 100644
--- a/drivers/pci/rom.c
+++ b/drivers/pci/rom.c
@@ -80,7 +80,8 @@
* The PCI window size could be much larger than the
* actual image size.
*/
-size_t pci_get_rom_size(struct pci_dev *pdev, void __iomem *rom, size_t size)
+static size_t pci_get_rom_size(struct pci_dev *pdev, void __iomem *rom,
+ size_t size)
{
void __iomem *image;
int last_image;
@@ -106,8 +107,14 @@
length = readw(pds + 16);
image += length * 512;
/* Avoid iterating through memory outside the resource window */
- if (image > rom + size)
+ if (image >= rom + size)
break;
+ if (!last_image) {
+ if (readw(image) != 0xAA55) {
+ pci_info(pdev, "No more image in the PCI ROM\n");
+ break;
+ }
+ }
} while (length && !last_image);
/* never return a size larger than the PCI resource window */
diff --git a/drivers/pci/switch/switchtec.c b/drivers/pci/switch/switchtec.c
index 47cd0c0..9940cc7 100644
--- a/drivers/pci/switch/switchtec.c
+++ b/drivers/pci/switch/switchtec.c
@@ -641,7 +641,7 @@
for (i = 0; i < SWITCHTEC_MAX_PFF_CSR; i++) {
reg = ioread16(&stdev->mmio_pff_csr[i].vendor_id);
- if (reg != MICROSEMI_VENDOR_ID)
+ if (reg != PCI_VENDOR_ID_MICROSEMI)
break;
reg = ioread32(&stdev->mmio_pff_csr[i].pff_event_summary);
@@ -1203,7 +1203,7 @@
for (i = 0; i < SWITCHTEC_MAX_PFF_CSR; i++) {
reg = ioread16(&stdev->mmio_pff_csr[i].vendor_id);
- if (reg != MICROSEMI_VENDOR_ID)
+ if (reg != PCI_VENDOR_ID_MICROSEMI)
break;
}
@@ -1267,7 +1267,7 @@
struct switchtec_dev *stdev;
int rc;
- if (pdev->class == MICROSEMI_NTB_CLASSCODE)
+ if (pdev->class == (PCI_CLASS_BRIDGE_OTHER << 8))
request_module_nowait("ntb_hw_switchtec");
stdev = stdev_create(pdev);
@@ -1321,19 +1321,19 @@
#define SWITCHTEC_PCI_DEVICE(device_id) \
{ \
- .vendor = MICROSEMI_VENDOR_ID, \
+ .vendor = PCI_VENDOR_ID_MICROSEMI, \
.device = device_id, \
.subvendor = PCI_ANY_ID, \
.subdevice = PCI_ANY_ID, \
- .class = MICROSEMI_MGMT_CLASSCODE, \
+ .class = (PCI_CLASS_MEMORY_OTHER << 8), \
.class_mask = 0xFFFFFFFF, \
}, \
{ \
- .vendor = MICROSEMI_VENDOR_ID, \
+ .vendor = PCI_VENDOR_ID_MICROSEMI, \
.device = device_id, \
.subvendor = PCI_ANY_ID, \
.subdevice = PCI_ANY_ID, \
- .class = MICROSEMI_NTB_CLASSCODE, \
+ .class = (PCI_CLASS_BRIDGE_OTHER << 8), \
.class_mask = 0xFFFFFFFF, \
}
diff --git a/drivers/pci/vpd.c b/drivers/pci/vpd.c
index 8617565..4963c2e 100644
--- a/drivers/pci/vpd.c
+++ b/drivers/pci/vpd.c
@@ -146,7 +146,7 @@
if (!vpd->busy)
return 0;
- while (time_before(jiffies, timeout)) {
+ do {
ret = pci_user_read_config_word(dev, vpd->cap + PCI_VPD_ADDR,
&status);
if (ret < 0)
@@ -160,10 +160,13 @@
if (fatal_signal_pending(current))
return -EINTR;
+ if (time_after(jiffies, timeout))
+ break;
+
usleep_range(10, max_sleep);
if (max_sleep < 1024)
max_sleep *= 2;
- }
+ } while (true);
pci_warn(dev, "VPD access failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update\n");
return -ETIMEDOUT;
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index 3d523ca..d67f32a 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -858,12 +858,6 @@
return 0;
}
-static void asus_cleanup_pci_hotplug(struct hotplug_slot *hotplug_slot)
-{
- kfree(hotplug_slot->info);
- kfree(hotplug_slot);
-}
-
static struct hotplug_slot_ops asus_hotplug_slot_ops = {
.owner = THIS_MODULE,
.get_adapter_status = asus_get_adapter_status,
@@ -905,7 +899,6 @@
goto error_info;
asus->hotplug_slot->private = asus;
- asus->hotplug_slot->release = &asus_cleanup_pci_hotplug;
asus->hotplug_slot->ops = &asus_hotplug_slot_ops;
asus_get_adapter_status(asus->hotplug_slot,
&asus->hotplug_slot->info->adapter_status);
@@ -1051,8 +1044,11 @@
* asus_unregister_rfkill_notifier()
*/
asus_rfkill_hotplug(asus);
- if (asus->hotplug_slot)
+ if (asus->hotplug_slot) {
pci_hp_deregister(asus->hotplug_slot);
+ kfree(asus->hotplug_slot->info);
+ kfree(asus->hotplug_slot);
+ }
if (asus->hotplug_workqueue)
destroy_workqueue(asus->hotplug_workqueue);
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 4c38904..a4bbf6e 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -726,12 +726,6 @@
return 0;
}
-static void eeepc_cleanup_pci_hotplug(struct hotplug_slot *hotplug_slot)
-{
- kfree(hotplug_slot->info);
- kfree(hotplug_slot);
-}
-
static struct hotplug_slot_ops eeepc_hotplug_slot_ops = {
.owner = THIS_MODULE,
.get_adapter_status = eeepc_get_adapter_status,
@@ -758,7 +752,6 @@
goto error_info;
eeepc->hotplug_slot->private = eeepc;
- eeepc->hotplug_slot->release = &eeepc_cleanup_pci_hotplug;
eeepc->hotplug_slot->ops = &eeepc_hotplug_slot_ops;
eeepc_get_adapter_status(eeepc->hotplug_slot,
&eeepc->hotplug_slot->info->adapter_status);
@@ -837,8 +830,11 @@
eeepc->wlan_rfkill = NULL;
}
- if (eeepc->hotplug_slot)
+ if (eeepc->hotplug_slot) {
pci_hp_deregister(eeepc->hotplug_slot);
+ kfree(eeepc->hotplug_slot->info);
+ kfree(eeepc->hotplug_slot);
+ }
if (eeepc->bluetooth_rfkill) {
rfkill_unregister(eeepc->bluetooth_rfkill);
diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index b423a30..345c0dc 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -1010,8 +1010,7 @@
&info, slot);
if (!ret)
/* User has access, do the reset */
- ret = slot ? pci_try_reset_slot(vdev->pdev->slot) :
- pci_try_reset_bus(vdev->pdev->bus);
+ ret = pci_reset_bus(vdev->pdev);
hot_reset_release:
for (i--; i >= 0; i--)
@@ -1373,8 +1372,7 @@
}
if (needs_reset)
- ret = slot ? pci_try_reset_slot(vdev->pdev->slot) :
- pci_try_reset_bus(vdev->pdev->bus);
+ ret = pci_reset_bus(vdev->pdev);
put_devs:
for (i = 0; i < devs.cur_index; i++) {
diff --git a/include/linux/dma-direction.h b/include/linux/dma-direction.h
index 3649a03..9c96e30 100644
--- a/include/linux/dma-direction.h
+++ b/include/linux/dma-direction.h
@@ -1,14 +1,12 @@
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _LINUX_DMA_DIRECTION_H
#define _LINUX_DMA_DIRECTION_H
-/*
- * These definitions mirror those in pci.h, so they can be used
- * interchangeably with their PCI_ counterparts.
- */
+
enum dma_data_direction {
DMA_BIDIRECTIONAL = 0,
DMA_TO_DEVICE = 1,
DMA_FROM_DEVICE = 2,
DMA_NONE = 3,
};
+
#endif
diff --git a/include/linux/pci-dma-compat.h b/include/linux/pci-dma-compat.h
index 0dd1a3f..c3f1b44 100644
--- a/include/linux/pci-dma-compat.h
+++ b/include/linux/pci-dma-compat.h
@@ -8,10 +8,10 @@
#include <linux/dma-mapping.h>
/* This defines the direction arg to the DMA mapping routines. */
-#define PCI_DMA_BIDIRECTIONAL 0
-#define PCI_DMA_TODEVICE 1
-#define PCI_DMA_FROMDEVICE 2
-#define PCI_DMA_NONE 3
+#define PCI_DMA_BIDIRECTIONAL DMA_BIDIRECTIONAL
+#define PCI_DMA_TODEVICE DMA_TO_DEVICE
+#define PCI_DMA_FROMDEVICE DMA_FROM_DEVICE
+#define PCI_DMA_NONE DMA_NONE
static inline void *
pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h
index 243eaa5..37dab81 100644
--- a/include/linux/pci-epc.h
+++ b/include/linux/pci-epc.h
@@ -17,6 +17,7 @@
PCI_EPC_IRQ_UNKNOWN,
PCI_EPC_IRQ_LEGACY,
PCI_EPC_IRQ_MSI,
+ PCI_EPC_IRQ_MSIX,
};
/**
@@ -30,7 +31,11 @@
* capability register
* @get_msi: ops to get the number of MSI interrupts allocated by the RC from
* the MSI capability register
- * @raise_irq: ops to raise a legacy or MSI interrupt
+ * @set_msix: ops to set the requested number of MSI-X interrupts in the
+ * MSI-X capability register
+ * @get_msix: ops to get the number of MSI-X interrupts allocated by the RC
+ * from the MSI-X capability register
+ * @raise_irq: ops to raise a legacy, MSI or MSI-X interrupt
* @start: ops to start the PCI link
* @stop: ops to stop the PCI link
* @owner: the module owner containing the ops
@@ -48,8 +53,10 @@
phys_addr_t addr);
int (*set_msi)(struct pci_epc *epc, u8 func_no, u8 interrupts);
int (*get_msi)(struct pci_epc *epc, u8 func_no);
+ int (*set_msix)(struct pci_epc *epc, u8 func_no, u16 interrupts);
+ int (*get_msix)(struct pci_epc *epc, u8 func_no);
int (*raise_irq)(struct pci_epc *epc, u8 func_no,
- enum pci_epc_irq_type type, u8 interrupt_num);
+ enum pci_epc_irq_type type, u16 interrupt_num);
int (*start)(struct pci_epc *epc);
void (*stop)(struct pci_epc *epc);
struct module *owner;
@@ -95,6 +102,7 @@
#define EPC_FEATURE_NO_LINKUP_NOTIFIER BIT(0)
#define EPC_FEATURE_BAR_MASK (BIT(1) | BIT(2) | BIT(3))
+#define EPC_FEATURE_MSIX_AVAILABLE BIT(4)
#define EPC_FEATURE_SET_BAR(features, bar) \
(features |= (EPC_FEATURE_BAR_MASK & (bar << 1)))
#define EPC_FEATURE_GET_BAR(features) \
@@ -144,8 +152,10 @@
phys_addr_t phys_addr);
int pci_epc_set_msi(struct pci_epc *epc, u8 func_no, u8 interrupts);
int pci_epc_get_msi(struct pci_epc *epc, u8 func_no);
+int pci_epc_set_msix(struct pci_epc *epc, u8 func_no, u16 interrupts);
+int pci_epc_get_msix(struct pci_epc *epc, u8 func_no);
int pci_epc_raise_irq(struct pci_epc *epc, u8 func_no,
- enum pci_epc_irq_type type, u8 interrupt_num);
+ enum pci_epc_irq_type type, u16 interrupt_num);
int pci_epc_start(struct pci_epc *epc);
void pci_epc_stop(struct pci_epc *epc);
struct pci_epc *pci_epc_get(const char *epc_name);
diff --git a/include/linux/pci-epf.h b/include/linux/pci-epf.h
index 4e77649..ec02f587 100644
--- a/include/linux/pci-epf.h
+++ b/include/linux/pci-epf.h
@@ -119,6 +119,7 @@
struct pci_epf_header *header;
struct pci_epf_bar bar[6];
u8 msi_interrupts;
+ u16 msix_interrupts;
u8 func_no;
struct pci_epc *epc;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 340029b..0543800 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -299,6 +299,7 @@
u8 hdr_type; /* PCI header type (`multi' flag masked out) */
#ifdef CONFIG_PCIEAER
u16 aer_cap; /* AER capability offset */
+ struct aer_stats *aer_stats; /* AER stats for this device */
#endif
u8 pcie_cap; /* PCIe capability offset */
u8 msi_cap; /* MSI capability offset */
@@ -350,6 +351,7 @@
unsigned int ltr_path:1; /* Latency Tolerance Reporting
supported from root to here */
#endif
+ unsigned int eetlp_prefix_path:1; /* End-to-End TLP Prefix */
pci_channel_state_t error_state; /* Current connectivity state */
struct device dev; /* Generic device interface */
@@ -368,7 +370,6 @@
unsigned int transparent:1; /* Subtractive decode bridge */
unsigned int multifunction:1; /* Multi-function device */
- unsigned int is_added:1;
unsigned int is_busmaster:1; /* Is busmaster */
unsigned int no_msi:1; /* May not use MSI */
unsigned int no_64bit_msi:1; /* May only use 32-bit MSIs */
@@ -388,6 +389,7 @@
unsigned int is_virtfn:1;
unsigned int reset_fn:1;
unsigned int is_hotplug_bridge:1;
+ unsigned int shpc_managed:1; /* SHPC owned by shpchp */
unsigned int is_thunderbolt:1; /* Thunderbolt controller */
unsigned int __aer_firmware_first_valid:1;
unsigned int __aer_firmware_first:1;
@@ -819,6 +821,21 @@
.vendor = PCI_VENDOR_ID_##vend, .device = (dev), \
.subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, 0, 0
+/**
+ * PCI_DEVICE_DATA - macro used to describe a specific PCI device in very short form
+ * @vend: the vendor name (without PCI_VENDOR_ID_ prefix)
+ * @dev: the device name (without PCI_DEVICE_ID_<vend>_ prefix)
+ * @data: the driver data to be filled
+ *
+ * This macro is used to create a struct pci_device_id that matches a
+ * specific PCI device. The subvendor, and subdevice fields will be set
+ * to PCI_ANY_ID.
+ */
+#define PCI_DEVICE_DATA(vend, dev, data) \
+ .vendor = PCI_VENDOR_ID_##vend, .device = PCI_DEVICE_ID_##vend##_##dev, \
+ .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, 0, 0, \
+ .driver_data = (kernel_ulong_t)(data)
+
enum {
PCI_REASSIGN_ALL_RSRC = 0x00000001, /* Ignore firmware setup */
PCI_REASSIGN_ALL_BUS = 0x00000002, /* Reassign all bus numbers */
@@ -1089,20 +1106,17 @@
enum pci_bus_speed *speed,
enum pcie_link_width *width);
void pcie_print_link_status(struct pci_dev *dev);
+bool pcie_has_flr(struct pci_dev *dev);
int pcie_flr(struct pci_dev *dev);
int __pci_reset_function_locked(struct pci_dev *dev);
int pci_reset_function(struct pci_dev *dev);
int pci_reset_function_locked(struct pci_dev *dev);
int pci_try_reset_function(struct pci_dev *dev);
int pci_probe_reset_slot(struct pci_slot *slot);
-int pci_reset_slot(struct pci_slot *slot);
-int pci_try_reset_slot(struct pci_slot *slot);
int pci_probe_reset_bus(struct pci_bus *bus);
-int pci_reset_bus(struct pci_bus *bus);
-int pci_try_reset_bus(struct pci_bus *bus);
+int pci_reset_bus(struct pci_dev *dev);
void pci_reset_secondary_bus(struct pci_dev *dev);
void pcibios_reset_secondary_bus(struct pci_dev *dev);
-int pci_reset_bridge_secondary_bus(struct pci_dev *dev);
void pci_update_resource(struct pci_dev *dev, int resno);
int __must_check pci_assign_resource(struct pci_dev *dev, int i);
int __must_check pci_reassign_resource(struct pci_dev *dev, int i, resource_size_t add_size, resource_size_t align);
@@ -1122,7 +1136,6 @@
void pci_disable_rom(struct pci_dev *pdev);
void __iomem __must_check *pci_map_rom(struct pci_dev *pdev, size_t *size);
void pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom);
-size_t pci_get_rom_size(struct pci_dev *pdev, void __iomem *rom, size_t size);
void __iomem __must_check *pci_platform_rom(struct pci_dev *pdev, size_t *size);
/* Power management related routines */
@@ -1240,6 +1253,8 @@
unsigned long pci_address_to_pio(phys_addr_t addr);
phys_addr_t pci_pio_to_address(unsigned long pio);
int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr);
+int devm_pci_remap_iospace(struct device *dev, const struct resource *res,
+ phys_addr_t phys_addr);
void pci_unmap_iospace(struct resource *res);
void __iomem *devm_pci_remap_cfgspace(struct device *dev,
resource_size_t offset,
@@ -1468,13 +1483,9 @@
#endif
#ifdef CONFIG_PCIEAER
-void pci_no_aer(void);
bool pci_aer_available(void);
-int pci_aer_init(struct pci_dev *dev);
#else
-static inline void pci_no_aer(void) { }
static inline bool pci_aer_available(void) { return false; }
-static inline int pci_aer_init(struct pci_dev *d) { return -ENODEV; }
#endif
#ifdef CONFIG_PCIE_ECRC
@@ -1876,20 +1887,9 @@
#ifdef CONFIG_PCI_QUIRKS
void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev);
-int pci_dev_specific_acs_enabled(struct pci_dev *dev, u16 acs_flags);
-int pci_dev_specific_enable_acs(struct pci_dev *dev);
#else
static inline void pci_fixup_device(enum pci_fixup_pass pass,
struct pci_dev *dev) { }
-static inline int pci_dev_specific_acs_enabled(struct pci_dev *dev,
- u16 acs_flags)
-{
- return -ENOTTY;
-}
-static inline int pci_dev_specific_enable_acs(struct pci_dev *dev)
-{
- return -ENOTTY;
-}
#endif
void __iomem *pcim_iomap(struct pci_dev *pdev, int bar, unsigned long maxlen);
diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h
index cf5e221..a6d6650 100644
--- a/include/linux/pci_hotplug.h
+++ b/include/linux/pci_hotplug.h
@@ -80,15 +80,12 @@
* @ops: pointer to the &struct hotplug_slot_ops to be used for this slot
* @info: pointer to the &struct hotplug_slot_info for the initial values for
* this slot.
- * @release: called during pci_hp_deregister to free memory allocated in a
- * hotplug_slot structure.
* @private: used by the hotplug pci controller driver to store whatever it
* needs.
*/
struct hotplug_slot {
struct hotplug_slot_ops *ops;
struct hotplug_slot_info *info;
- void (*release) (struct hotplug_slot *slot);
void *private;
/* Variables below this are for use only by the hotplug pci core. */
@@ -104,13 +101,23 @@
int __pci_hp_register(struct hotplug_slot *slot, struct pci_bus *pbus, int nr,
const char *name, struct module *owner,
const char *mod_name);
-int pci_hp_deregister(struct hotplug_slot *slot);
+int __pci_hp_initialize(struct hotplug_slot *slot, struct pci_bus *bus, int nr,
+ const char *name, struct module *owner,
+ const char *mod_name);
+int pci_hp_add(struct hotplug_slot *slot);
+
+void pci_hp_del(struct hotplug_slot *slot);
+void pci_hp_destroy(struct hotplug_slot *slot);
+void pci_hp_deregister(struct hotplug_slot *slot);
+
int __must_check pci_hp_change_slot_info(struct hotplug_slot *slot,
struct hotplug_slot_info *info);
/* use a define to avoid include chaining to get THIS_MODULE & friends */
#define pci_hp_register(slot, pbus, devnr, name) \
__pci_hp_register(slot, pbus, devnr, name, THIS_MODULE, KBUILD_MODNAME)
+#define pci_hp_initialize(slot, bus, nr, name) \
+ __pci_hp_initialize(slot, bus, nr, name, THIS_MODULE, KBUILD_MODNAME)
/* PCI Setting Record (Type 0) */
struct hpp_type0 {
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 2950223..99d366c 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1668,6 +1668,7 @@
#define PCI_DEVICE_ID_COMPEX_ENET100VG4 0x0112
#define PCI_VENDOR_ID_PMC_Sierra 0x11f8
+#define PCI_VENDOR_ID_MICROSEMI 0x11f8
#define PCI_VENDOR_ID_RP 0x11fe
#define PCI_DEVICE_ID_RP32INTF 0x0001
@@ -2541,6 +2542,7 @@
#define PCI_DEVICE_ID_NETRONOME_NFP3200 0x3200
#define PCI_DEVICE_ID_NETRONOME_NFP3240 0x3240
#define PCI_DEVICE_ID_NETRONOME_NFP4000 0x4000
+#define PCI_DEVICE_ID_NETRONOME_NFP5000 0x5000
#define PCI_DEVICE_ID_NETRONOME_NFP6000 0x6000
#define PCI_DEVICE_ID_NETRONOME_NFP6000_VF 0x6003
diff --git a/include/linux/switchtec.h b/include/linux/switchtec.h
index ec93e93..ab400af 100644
--- a/include/linux/switchtec.h
+++ b/include/linux/switchtec.h
@@ -19,10 +19,6 @@
#include <linux/pci.h>
#include <linux/cdev.h>
-#define MICROSEMI_VENDOR_ID 0x11f8
-#define MICROSEMI_NTB_CLASSCODE 0x068000
-#define MICROSEMI_MGMT_CLASSCODE 0x058000
-
#define SWITCHTEC_MRPC_PAYLOAD_SIZE 1024
#define SWITCHTEC_MAX_PFF_CSR 48
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index 4da87e2..ee556cc 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -636,6 +636,7 @@
#define PCI_EXP_DEVCAP2_OBFF_MASK 0x000c0000 /* OBFF support mechanism */
#define PCI_EXP_DEVCAP2_OBFF_MSG 0x00040000 /* New message signaling */
#define PCI_EXP_DEVCAP2_OBFF_WAKE 0x00080000 /* Re-use WAKE# for OBFF */
+#define PCI_EXP_DEVCAP2_EE_PREFIX 0x00200000 /* End-End TLP Prefix */
#define PCI_EXP_DEVCTL2 40 /* Device Control 2 */
#define PCI_EXP_DEVCTL2_COMP_TIMEOUT 0x000f /* Completion Timeout Value */
#define PCI_EXP_DEVCTL2_COMP_TMOUT_DIS 0x0010 /* Completion Timeout Disable */
@@ -960,8 +961,9 @@
#define PCI_REBAR_CTRL 8 /* control register */
#define PCI_REBAR_CTRL_BAR_IDX 0x00000007 /* BAR index */
#define PCI_REBAR_CTRL_NBAR_MASK 0x000000E0 /* # of resizable BARs */
-#define PCI_REBAR_CTRL_NBAR_SHIFT 5 /* shift for # of BARs */
+#define PCI_REBAR_CTRL_NBAR_SHIFT 5 /* shift for # of BARs */
#define PCI_REBAR_CTRL_BAR_SIZE 0x00001F00 /* BAR size */
+#define PCI_REBAR_CTRL_BAR_SHIFT 8 /* shift for BAR size */
/* Dynamic Power Allocation */
#define PCI_DPA_CAP 4 /* capability register */
diff --git a/include/uapi/linux/pcitest.h b/include/uapi/linux/pcitest.h
index 953cf03..cbf422e 100644
--- a/include/uapi/linux/pcitest.h
+++ b/include/uapi/linux/pcitest.h
@@ -16,5 +16,8 @@
#define PCITEST_WRITE _IOW('P', 0x4, unsigned long)
#define PCITEST_READ _IOW('P', 0x5, unsigned long)
#define PCITEST_COPY _IOW('P', 0x6, unsigned long)
+#define PCITEST_MSIX _IOW('P', 0x7, int)
+#define PCITEST_SET_IRQTYPE _IOW('P', 0x8, int)
+#define PCITEST_GET_IRQTYPE _IO('P', 0x9)
#endif /* __UAPI_LINUX_PCITEST_H */
diff --git a/tools/pci/pcitest.c b/tools/pci/pcitest.c
index 9074b47..af146bb 100644
--- a/tools/pci/pcitest.c
+++ b/tools/pci/pcitest.c
@@ -31,12 +31,17 @@
#define BILLION 1E9
static char *result[] = { "NOT OKAY", "OKAY" };
+static char *irq[] = { "LEGACY", "MSI", "MSI-X" };
struct pci_test {
char *device;
char barnum;
bool legacyirq;
unsigned int msinum;
+ unsigned int msixnum;
+ int irqtype;
+ bool set_irqtype;
+ bool get_irqtype;
bool read;
bool write;
bool copy;
@@ -65,6 +70,24 @@
fprintf(stdout, "%s\n", result[ret]);
}
+ if (test->set_irqtype) {
+ ret = ioctl(fd, PCITEST_SET_IRQTYPE, test->irqtype);
+ fprintf(stdout, "SET IRQ TYPE TO %s:\t\t", irq[test->irqtype]);
+ if (ret < 0)
+ fprintf(stdout, "FAILED\n");
+ else
+ fprintf(stdout, "%s\n", result[ret]);
+ }
+
+ if (test->get_irqtype) {
+ ret = ioctl(fd, PCITEST_GET_IRQTYPE);
+ fprintf(stdout, "GET IRQ TYPE:\t\t");
+ if (ret < 0)
+ fprintf(stdout, "FAILED\n");
+ else
+ fprintf(stdout, "%s\n", irq[ret]);
+ }
+
if (test->legacyirq) {
ret = ioctl(fd, PCITEST_LEGACY_IRQ, 0);
fprintf(stdout, "LEGACY IRQ:\t");
@@ -83,6 +106,15 @@
fprintf(stdout, "%s\n", result[ret]);
}
+ if (test->msixnum > 0 && test->msixnum <= 2048) {
+ ret = ioctl(fd, PCITEST_MSIX, test->msixnum);
+ fprintf(stdout, "MSI-X%d:\t\t", test->msixnum);
+ if (ret < 0)
+ fprintf(stdout, "TEST FAILED\n");
+ else
+ fprintf(stdout, "%s\n", result[ret]);
+ }
+
if (test->write) {
ret = ioctl(fd, PCITEST_WRITE, test->size);
fprintf(stdout, "WRITE (%7ld bytes):\t\t", test->size);
@@ -133,7 +165,7 @@
/* set default endpoint device */
test->device = "/dev/pci-endpoint-test.0";
- while ((c = getopt(argc, argv, "D:b:m:lrwcs:")) != EOF)
+ while ((c = getopt(argc, argv, "D:b:m:x:i:Ilrwcs:")) != EOF)
switch (c) {
case 'D':
test->device = optarg;
@@ -151,6 +183,20 @@
if (test->msinum < 1 || test->msinum > 32)
goto usage;
continue;
+ case 'x':
+ test->msixnum = atoi(optarg);
+ if (test->msixnum < 1 || test->msixnum > 2048)
+ goto usage;
+ continue;
+ case 'i':
+ test->irqtype = atoi(optarg);
+ if (test->irqtype < 0 || test->irqtype > 2)
+ goto usage;
+ test->set_irqtype = true;
+ continue;
+ case 'I':
+ test->get_irqtype = true;
+ continue;
case 'r':
test->read = true;
continue;
@@ -173,6 +219,9 @@
"\t-D <dev> PCI endpoint test device {default: /dev/pci-endpoint-test.0}\n"
"\t-b <bar num> BAR test (bar number between 0..5)\n"
"\t-m <msi num> MSI test (msi number between 1..32)\n"
+ "\t-x <msix num> \tMSI-X test (msix number between 1..2048)\n"
+ "\t-i <irq type> \tSet IRQ type (0 - Legacy, 1 - MSI, 2 - MSI-X)\n"
+ "\t-I Get current IRQ type configured\n"
"\t-l Legacy IRQ test\n"
"\t-r Read buffer test\n"
"\t-w Write buffer test\n"
diff --git a/tools/pci/pcitest.sh b/tools/pci/pcitest.sh
index 77e8c85..75ed48ff 100644
--- a/tools/pci/pcitest.sh
+++ b/tools/pci/pcitest.sh
@@ -16,7 +16,10 @@
echo "Interrupt tests"
echo
+pcitest -i 0
pcitest -l
+
+pcitest -i 1
msi=1
while [ $msi -lt 33 ]
@@ -26,9 +29,21 @@
done
echo
+pcitest -i 2
+msix=1
+
+while [ $msix -lt 2049 ]
+do
+ pcitest -x $msix
+ msix=`expr $msix + 1`
+done
+echo
+
echo "Read Tests"
echo
+pcitest -i 1
+
pcitest -r -s 1
pcitest -r -s 1024
pcitest -r -s 1025