| /* |
| * Copyright (c) 2001-2002 by David Brownell |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY |
| * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software Foundation, |
| * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #ifndef __USB_CORE_HCD_H |
| #define __USB_CORE_HCD_H |
| |
| #ifdef __KERNEL__ |
| |
| #include <linux/rwsem.h> |
| #include <linux/interrupt.h> |
| |
| #define MAX_TOPO_LEVEL 6 |
| |
| /* This file contains declarations of usbcore internals that are mostly |
| * used or exposed by Host Controller Drivers. |
| */ |
| |
| /* |
| * USB Packet IDs (PIDs) |
| */ |
| #define USB_PID_EXT 0xf0 /* USB 2.0 LPM ECN */ |
| #define USB_PID_OUT 0xe1 |
| #define USB_PID_ACK 0xd2 |
| #define USB_PID_DATA0 0xc3 |
| #define USB_PID_PING 0xb4 /* USB 2.0 */ |
| #define USB_PID_SOF 0xa5 |
| #define USB_PID_NYET 0x96 /* USB 2.0 */ |
| #define USB_PID_DATA2 0x87 /* USB 2.0 */ |
| #define USB_PID_SPLIT 0x78 /* USB 2.0 */ |
| #define USB_PID_IN 0x69 |
| #define USB_PID_NAK 0x5a |
| #define USB_PID_DATA1 0x4b |
| #define USB_PID_PREAMBLE 0x3c /* Token mode */ |
| #define USB_PID_ERR 0x3c /* USB 2.0: handshake mode */ |
| #define USB_PID_SETUP 0x2d |
| #define USB_PID_STALL 0x1e |
| #define USB_PID_MDATA 0x0f /* USB 2.0 */ |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* |
| * USB Host Controller Driver (usb_hcd) framework |
| * |
| * Since "struct usb_bus" is so thin, you can't share much code in it. |
| * This framework is a layer over that, and should be more sharable. |
| * |
| * @authorized_default: Specifies if new devices are authorized to |
| * connect by default or they require explicit |
| * user space authorization; this bit is settable |
| * through /sys/class/usb_host/X/authorized_default. |
| * For the rest is RO, so we don't lock to r/w it. |
| */ |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| struct giveback_urb_bh { |
| bool running; |
| spinlock_t lock; |
| struct list_head head; |
| struct tasklet_struct bh; |
| struct usb_host_endpoint *completing_ep; |
| }; |
| |
| struct usb_hcd { |
| |
| /* |
| * housekeeping |
| */ |
| struct usb_bus self; /* hcd is-a bus */ |
| struct kref kref; /* reference counter */ |
| |
| const char *product_desc; /* product/vendor string */ |
| int speed; /* Speed for this roothub. |
| * May be different from |
| * hcd->driver->flags & HCD_MASK |
| */ |
| char irq_descr[24]; /* driver + bus # */ |
| |
| struct timer_list rh_timer; /* drives root-hub polling */ |
| struct urb *status_urb; /* the current status urb */ |
| #ifdef CONFIG_PM_RUNTIME |
| struct work_struct wakeup_work; /* for remote wakeup */ |
| #endif |
| |
| /* |
| * hardware info/state |
| */ |
| const struct hc_driver *driver; /* hw-specific hooks */ |
| |
| /* |
| * OTG and some Host controllers need software interaction with phys; |
| * other external phys should be software-transparent |
| */ |
| struct usb_phy *phy; |
| |
| /* Flags that need to be manipulated atomically because they can |
| * change while the host controller is running. Always use |
| * set_bit() or clear_bit() to change their values. |
| */ |
| unsigned long flags; |
| #define HCD_FLAG_HW_ACCESSIBLE 0 /* at full power */ |
| #define HCD_FLAG_POLL_RH 2 /* poll for rh status? */ |
| #define HCD_FLAG_POLL_PENDING 3 /* status has changed? */ |
| #define HCD_FLAG_WAKEUP_PENDING 4 /* root hub is resuming? */ |
| #define HCD_FLAG_RH_RUNNING 5 /* root hub is running? */ |
| #define HCD_FLAG_DEAD 6 /* controller has died? */ |
| |
| /* The flags can be tested using these macros; they are likely to |
| * be slightly faster than test_bit(). |
| */ |
| #define HCD_HW_ACCESSIBLE(hcd) ((hcd)->flags & (1U << HCD_FLAG_HW_ACCESSIBLE)) |
| #define HCD_POLL_RH(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_RH)) |
| #define HCD_POLL_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_PENDING)) |
| #define HCD_WAKEUP_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING)) |
| #define HCD_RH_RUNNING(hcd) ((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING)) |
| #define HCD_DEAD(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEAD)) |
| |
| /* Flags that get set only during HCD registration or removal. */ |
| unsigned rh_registered:1;/* is root hub registered? */ |
| unsigned rh_pollable:1; /* may we poll the root hub? */ |
| unsigned msix_enabled:1; /* driver has MSI-X enabled? */ |
| unsigned remove_phy:1; /* auto-remove USB phy */ |
| |
| /* The next flag is a stopgap, to be removed when all the HCDs |
| * support the new root-hub polling mechanism. */ |
| unsigned uses_new_polling:1; |
| unsigned wireless:1; /* Wireless USB HCD */ |
| unsigned authorized_default:1; |
| unsigned has_tt:1; /* Integrated TT in root hub */ |
| unsigned amd_resume_bug:1; /* AMD remote wakeup quirk */ |
| |
| unsigned int irq; /* irq allocated */ |
| void __iomem *regs; /* device memory/io */ |
| resource_size_t rsrc_start; /* memory/io resource start */ |
| resource_size_t rsrc_len; /* memory/io resource length */ |
| unsigned power_budget; /* in mA, 0 = no limit */ |
| |
| struct giveback_urb_bh high_prio_bh; |
| struct giveback_urb_bh low_prio_bh; |
| |
| /* bandwidth_mutex should be taken before adding or removing |
| * any new bus bandwidth constraints: |
| * 1. Before adding a configuration for a new device. |
| * 2. Before removing the configuration to put the device into |
| * the addressed state. |
| * 3. Before selecting a different configuration. |
| * 4. Before selecting an alternate interface setting. |
| * |
| * bandwidth_mutex should be dropped after a successful control message |
| * to the device, or resetting the bandwidth after a failed attempt. |
| */ |
| struct mutex *bandwidth_mutex; |
| struct usb_hcd *shared_hcd; |
| struct usb_hcd *primary_hcd; |
| |
| |
| #define HCD_BUFFER_POOLS 4 |
| struct dma_pool *pool[HCD_BUFFER_POOLS]; |
| |
| int state; |
| # define __ACTIVE 0x01 |
| # define __SUSPEND 0x04 |
| # define __TRANSIENT 0x80 |
| |
| # define HC_STATE_HALT 0 |
| # define HC_STATE_RUNNING (__ACTIVE) |
| # define HC_STATE_QUIESCING (__SUSPEND|__TRANSIENT|__ACTIVE) |
| # define HC_STATE_RESUMING (__SUSPEND|__TRANSIENT) |
| # define HC_STATE_SUSPENDED (__SUSPEND) |
| |
| #define HC_IS_RUNNING(state) ((state) & __ACTIVE) |
| #define HC_IS_SUSPENDED(state) ((state) & __SUSPEND) |
| |
| /* more shared queuing code would be good; it should support |
| * smarter scheduling, handle transaction translators, etc; |
| * input size of periodic table to an interrupt scheduler. |
| * (ohci 32, uhci 1024, ehci 256/512/1024). |
| */ |
| |
| /* The HC driver's private data is stored at the end of |
| * this structure. |
| */ |
| unsigned long hcd_priv[0] |
| __attribute__ ((aligned(sizeof(s64)))); |
| }; |
| |
| /* 2.4 does this a bit differently ... */ |
| static inline struct usb_bus *hcd_to_bus(struct usb_hcd *hcd) |
| { |
| return &hcd->self; |
| } |
| |
| static inline struct usb_hcd *bus_to_hcd(struct usb_bus *bus) |
| { |
| return container_of(bus, struct usb_hcd, self); |
| } |
| |
| struct hcd_timeout { /* timeouts we allocate */ |
| struct list_head timeout_list; |
| struct timer_list timer; |
| }; |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| |
| struct hc_driver { |
| const char *description; /* "ehci-hcd" etc */ |
| const char *product_desc; /* product/vendor string */ |
| size_t hcd_priv_size; /* size of private data */ |
| |
| /* irq handler */ |
| irqreturn_t (*irq) (struct usb_hcd *hcd); |
| |
| int flags; |
| #define HCD_MEMORY 0x0001 /* HC regs use memory (else I/O) */ |
| #define HCD_LOCAL_MEM 0x0002 /* HC needs local memory */ |
| #define HCD_SHARED 0x0004 /* Two (or more) usb_hcds share HW */ |
| #define HCD_USB11 0x0010 /* USB 1.1 */ |
| #define HCD_USB2 0x0020 /* USB 2.0 */ |
| #define HCD_USB25 0x0030 /* Wireless USB 1.0 (USB 2.5)*/ |
| #define HCD_USB3 0x0040 /* USB 3.0 */ |
| #define HCD_MASK 0x0070 |
| #define HCD_BH 0x0100 /* URB complete in BH context */ |
| |
| /* called to init HCD and root hub */ |
| int (*reset) (struct usb_hcd *hcd); |
| int (*start) (struct usb_hcd *hcd); |
| |
| /* NOTE: these suspend/resume calls relate to the HC as |
| * a whole, not just the root hub; they're for PCI bus glue. |
| */ |
| /* called after suspending the hub, before entering D3 etc */ |
| int (*pci_suspend)(struct usb_hcd *hcd, bool do_wakeup); |
| |
| /* called after entering D0 (etc), before resuming the hub */ |
| int (*pci_resume)(struct usb_hcd *hcd, bool hibernated); |
| |
| /* cleanly make HCD stop writing memory and doing I/O */ |
| void (*stop) (struct usb_hcd *hcd); |
| |
| /* shutdown HCD */ |
| void (*shutdown) (struct usb_hcd *hcd); |
| |
| /* return current frame number */ |
| int (*get_frame_number) (struct usb_hcd *hcd); |
| |
| /* manage i/o requests, device state */ |
| int (*urb_enqueue)(struct usb_hcd *hcd, |
| struct urb *urb, gfp_t mem_flags); |
| int (*urb_dequeue)(struct usb_hcd *hcd, |
| struct urb *urb, int status); |
| |
| /* |
| * (optional) these hooks allow an HCD to override the default DMA |
| * mapping and unmapping routines. In general, they shouldn't be |
| * necessary unless the host controller has special DMA requirements, |
| * such as alignment contraints. If these are not specified, the |
| * general usb_hcd_(un)?map_urb_for_dma functions will be used instead |
| * (and it may be a good idea to call these functions in your HCD |
| * implementation) |
| */ |
| int (*map_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb, |
| gfp_t mem_flags); |
| void (*unmap_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb); |
| |
| /* hw synch, freeing endpoint resources that urb_dequeue can't */ |
| void (*endpoint_disable)(struct usb_hcd *hcd, |
| struct usb_host_endpoint *ep); |
| |
| /* (optional) reset any endpoint state such as sequence number |
| and current window */ |
| void (*endpoint_reset)(struct usb_hcd *hcd, |
| struct usb_host_endpoint *ep); |
| |
| /* root hub support */ |
| int (*hub_status_data) (struct usb_hcd *hcd, char *buf); |
| int (*hub_control) (struct usb_hcd *hcd, |
| u16 typeReq, u16 wValue, u16 wIndex, |
| char *buf, u16 wLength); |
| int (*bus_suspend)(struct usb_hcd *); |
| int (*bus_resume)(struct usb_hcd *); |
| int (*start_port_reset)(struct usb_hcd *, unsigned port_num); |
| |
| /* force handover of high-speed port to full-speed companion */ |
| void (*relinquish_port)(struct usb_hcd *, int); |
| /* has a port been handed over to a companion? */ |
| int (*port_handed_over)(struct usb_hcd *, int); |
| |
| /* CLEAR_TT_BUFFER completion callback */ |
| void (*clear_tt_buffer_complete)(struct usb_hcd *, |
| struct usb_host_endpoint *); |
| |
| /* xHCI specific functions */ |
| /* Called by usb_alloc_dev to alloc HC device structures */ |
| int (*alloc_dev)(struct usb_hcd *, struct usb_device *); |
| /* Called by usb_disconnect to free HC device structures */ |
| void (*free_dev)(struct usb_hcd *, struct usb_device *); |
| /* Change a group of bulk endpoints to support multiple stream IDs */ |
| int (*alloc_streams)(struct usb_hcd *hcd, struct usb_device *udev, |
| struct usb_host_endpoint **eps, unsigned int num_eps, |
| unsigned int num_streams, gfp_t mem_flags); |
| /* Reverts a group of bulk endpoints back to not using stream IDs. |
| * Can fail if we run out of memory. |
| */ |
| int (*free_streams)(struct usb_hcd *hcd, struct usb_device *udev, |
| struct usb_host_endpoint **eps, unsigned int num_eps, |
| gfp_t mem_flags); |
| |
| /* Bandwidth computation functions */ |
| /* Note that add_endpoint() can only be called once per endpoint before |
| * check_bandwidth() or reset_bandwidth() must be called. |
| * drop_endpoint() can only be called once per endpoint also. |
| * A call to xhci_drop_endpoint() followed by a call to |
| * xhci_add_endpoint() will add the endpoint to the schedule with |
| * possibly new parameters denoted by a different endpoint descriptor |
| * in usb_host_endpoint. A call to xhci_add_endpoint() followed by a |
| * call to xhci_drop_endpoint() is not allowed. |
| */ |
| /* Allocate endpoint resources and add them to a new schedule */ |
| int (*add_endpoint)(struct usb_hcd *, struct usb_device *, |
| struct usb_host_endpoint *); |
| /* Drop an endpoint from a new schedule */ |
| int (*drop_endpoint)(struct usb_hcd *, struct usb_device *, |
| struct usb_host_endpoint *); |
| /* Check that a new hardware configuration, set using |
| * endpoint_enable and endpoint_disable, does not exceed bus |
| * bandwidth. This must be called before any set configuration |
| * or set interface requests are sent to the device. |
| */ |
| int (*check_bandwidth)(struct usb_hcd *, struct usb_device *); |
| /* Reset the device schedule to the last known good schedule, |
| * which was set from a previous successful call to |
| * check_bandwidth(). This reverts any add_endpoint() and |
| * drop_endpoint() calls since that last successful call. |
| * Used for when a check_bandwidth() call fails due to resource |
| * or bandwidth constraints. |
| */ |
| void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *); |
| /* Returns the hardware-chosen device address */ |
| int (*address_device)(struct usb_hcd *, struct usb_device *udev); |
| /* Notifies the HCD after a hub descriptor is fetched. |
| * Will block. |
| */ |
| int (*update_hub_device)(struct usb_hcd *, struct usb_device *hdev, |
| struct usb_tt *tt, gfp_t mem_flags); |
| int (*reset_device)(struct usb_hcd *, struct usb_device *); |
| /* Notifies the HCD after a device is connected and its |
| * address is set |
| */ |
| int (*update_device)(struct usb_hcd *, struct usb_device *); |
| int (*set_usb2_hw_lpm)(struct usb_hcd *, struct usb_device *, int); |
| /* USB 3.0 Link Power Management */ |
| /* Returns the USB3 hub-encoded value for the U1/U2 timeout. */ |
| int (*enable_usb3_lpm_timeout)(struct usb_hcd *, |
| struct usb_device *, enum usb3_link_state state); |
| /* The xHCI host controller can still fail the command to |
| * disable the LPM timeouts, so this can return an error code. |
| */ |
| int (*disable_usb3_lpm_timeout)(struct usb_hcd *, |
| struct usb_device *, enum usb3_link_state state); |
| int (*find_raw_port_number)(struct usb_hcd *, int); |
| }; |
| |
| static inline int hcd_giveback_urb_in_bh(struct usb_hcd *hcd) |
| { |
| return hcd->driver->flags & HCD_BH; |
| } |
| |
| static inline bool hcd_periodic_completion_in_progress(struct usb_hcd *hcd, |
| struct usb_host_endpoint *ep) |
| { |
| return hcd->high_prio_bh.completing_ep == ep; |
| } |
| |
| extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb); |
| extern int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb, |
| int status); |
| extern void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb); |
| |
| extern int usb_hcd_submit_urb(struct urb *urb, gfp_t mem_flags); |
| extern int usb_hcd_unlink_urb(struct urb *urb, int status); |
| extern void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, |
| int status); |
| extern int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, |
| gfp_t mem_flags); |
| extern void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *, struct urb *); |
| extern void usb_hcd_unmap_urb_for_dma(struct usb_hcd *, struct urb *); |
| extern void usb_hcd_flush_endpoint(struct usb_device *udev, |
| struct usb_host_endpoint *ep); |
| extern void usb_hcd_disable_endpoint(struct usb_device *udev, |
| struct usb_host_endpoint *ep); |
| extern void usb_hcd_reset_endpoint(struct usb_device *udev, |
| struct usb_host_endpoint *ep); |
| extern void usb_hcd_synchronize_unlinks(struct usb_device *udev); |
| extern int usb_hcd_alloc_bandwidth(struct usb_device *udev, |
| struct usb_host_config *new_config, |
| struct usb_host_interface *old_alt, |
| struct usb_host_interface *new_alt); |
| extern int usb_hcd_get_frame_number(struct usb_device *udev); |
| |
| extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver, |
| struct device *dev, const char *bus_name); |
| extern struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver, |
| struct device *dev, const char *bus_name, |
| struct usb_hcd *shared_hcd); |
| extern struct usb_hcd *usb_get_hcd(struct usb_hcd *hcd); |
| extern void usb_put_hcd(struct usb_hcd *hcd); |
| extern int usb_hcd_is_primary_hcd(struct usb_hcd *hcd); |
| extern int usb_add_hcd(struct usb_hcd *hcd, |
| unsigned int irqnum, unsigned long irqflags); |
| extern void usb_remove_hcd(struct usb_hcd *hcd); |
| extern int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1); |
| |
| struct platform_device; |
| extern void usb_hcd_platform_shutdown(struct platform_device *dev); |
| |
| #ifdef CONFIG_PCI |
| struct pci_dev; |
| struct pci_device_id; |
| extern int usb_hcd_pci_probe(struct pci_dev *dev, |
| const struct pci_device_id *id); |
| extern void usb_hcd_pci_remove(struct pci_dev *dev); |
| extern void usb_hcd_pci_shutdown(struct pci_dev *dev); |
| |
| extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev); |
| |
| #ifdef CONFIG_PM |
| extern const struct dev_pm_ops usb_hcd_pci_pm_ops; |
| #endif |
| #endif /* CONFIG_PCI */ |
| |
| /* pci-ish (pdev null is ok) buffer alloc/mapping support */ |
| int hcd_buffer_create(struct usb_hcd *hcd); |
| void hcd_buffer_destroy(struct usb_hcd *hcd); |
| |
| void *hcd_buffer_alloc(struct usb_bus *bus, size_t size, |
| gfp_t mem_flags, dma_addr_t *dma); |
| void hcd_buffer_free(struct usb_bus *bus, size_t size, |
| void *addr, dma_addr_t dma); |
| |
| /* generic bus glue, needed for host controllers that don't use PCI */ |
| extern irqreturn_t usb_hcd_irq(int irq, void *__hcd); |
| |
| extern void usb_hc_died(struct usb_hcd *hcd); |
| extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd); |
| extern void usb_wakeup_notification(struct usb_device *hdev, |
| unsigned int portnum); |
| |
| extern void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum); |
| extern void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum); |
| |
| /* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */ |
| #define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1) |
| #define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep))) |
| #define usb_settoggle(dev, ep, out, bit) \ |
| ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \ |
| ((bit) << (ep))) |
| |
| /* -------------------------------------------------------------------------- */ |
| |
| /* Enumeration is only for the hub driver, or HCD virtual root hubs */ |
| extern struct usb_device *usb_alloc_dev(struct usb_device *parent, |
| struct usb_bus *, unsigned port); |
| extern int usb_new_device(struct usb_device *dev); |
| extern void usb_disconnect(struct usb_device **); |
| |
| extern int usb_get_configuration(struct usb_device *dev); |
| extern void usb_destroy_configuration(struct usb_device *dev); |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* |
| * HCD Root Hub support |
| */ |
| |
| #include <linux/usb/ch11.h> |
| |
| /* |
| * As of USB 2.0, full/low speed devices are segregated into trees. |
| * One type grows from USB 1.1 host controllers (OHCI, UHCI etc). |
| * The other type grows from high speed hubs when they connect to |
| * full/low speed devices using "Transaction Translators" (TTs). |
| * |
| * TTs should only be known to the hub driver, and high speed bus |
| * drivers (only EHCI for now). They affect periodic scheduling and |
| * sometimes control/bulk error recovery. |
| */ |
| |
| struct usb_device; |
| |
| struct usb_tt { |
| struct usb_device *hub; /* upstream highspeed hub */ |
| int multi; /* true means one TT per port */ |
| unsigned think_time; /* think time in ns */ |
| void *hcpriv; /* HCD private data */ |
| |
| /* for control/bulk error recovery (CLEAR_TT_BUFFER) */ |
| spinlock_t lock; |
| struct list_head clear_list; /* of usb_tt_clear */ |
| struct work_struct clear_work; |
| }; |
| |
| struct usb_tt_clear { |
| struct list_head clear_list; |
| unsigned tt; |
| u16 devinfo; |
| struct usb_hcd *hcd; |
| struct usb_host_endpoint *ep; |
| }; |
| |
| extern int usb_hub_clear_tt_buffer(struct urb *urb); |
| extern void usb_ep0_reinit(struct usb_device *); |
| |
| /* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */ |
| #define DeviceRequest \ |
| ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8) |
| #define DeviceOutRequest \ |
| ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8) |
| |
| #define InterfaceRequest \ |
| ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8) |
| |
| #define EndpointRequest \ |
| ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8) |
| #define EndpointOutRequest \ |
| ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8) |
| |
| /* class requests from the USB 2.0 hub spec, table 11-15 */ |
| /* GetBusState and SetHubDescriptor are optional, omitted */ |
| #define ClearHubFeature (0x2000 | USB_REQ_CLEAR_FEATURE) |
| #define ClearPortFeature (0x2300 | USB_REQ_CLEAR_FEATURE) |
| #define GetHubDescriptor (0xa000 | USB_REQ_GET_DESCRIPTOR) |
| #define GetHubStatus (0xa000 | USB_REQ_GET_STATUS) |
| #define GetPortStatus (0xa300 | USB_REQ_GET_STATUS) |
| #define SetHubFeature (0x2000 | USB_REQ_SET_FEATURE) |
| #define SetPortFeature (0x2300 | USB_REQ_SET_FEATURE) |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* class requests from USB 3.0 hub spec, table 10-5 */ |
| #define SetHubDepth (0x3000 | HUB_SET_DEPTH) |
| #define GetPortErrorCount (0x8000 | HUB_GET_PORT_ERR_COUNT) |
| |
| /* |
| * Generic bandwidth allocation constants/support |
| */ |
| #define FRAME_TIME_USECS 1000L |
| #define BitTime(bytecount) (7 * 8 * bytecount / 6) /* with integer truncation */ |
| /* Trying not to use worst-case bit-stuffing |
| * of (7/6 * 8 * bytecount) = 9.33 * bytecount */ |
| /* bytecount = data payload byte count */ |
| |
| #define NS_TO_US(ns) DIV_ROUND_UP(ns, 1000L) |
| /* convert nanoseconds to microseconds, rounding up */ |
| |
| /* |
| * Full/low speed bandwidth allocation constants/support. |
| */ |
| #define BW_HOST_DELAY 1000L /* nanoseconds */ |
| #define BW_HUB_LS_SETUP 333L /* nanoseconds */ |
| /* 4 full-speed bit times (est.) */ |
| |
| #define FRAME_TIME_BITS 12000L /* frame = 1 millisecond */ |
| #define FRAME_TIME_MAX_BITS_ALLOC (90L * FRAME_TIME_BITS / 100L) |
| #define FRAME_TIME_MAX_USECS_ALLOC (90L * FRAME_TIME_USECS / 100L) |
| |
| /* |
| * Ceiling [nano/micro]seconds (typical) for that many bytes at high speed |
| * ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed |
| * to preallocate bandwidth) |
| */ |
| #define USB2_HOST_DELAY 5 /* nsec, guess */ |
| #define HS_NSECS(bytes) (((55 * 8 * 2083) \ |
| + (2083UL * (3 + BitTime(bytes))))/1000 \ |
| + USB2_HOST_DELAY) |
| #define HS_NSECS_ISO(bytes) (((38 * 8 * 2083) \ |
| + (2083UL * (3 + BitTime(bytes))))/1000 \ |
| + USB2_HOST_DELAY) |
| #define HS_USECS(bytes) NS_TO_US(HS_NSECS(bytes)) |
| #define HS_USECS_ISO(bytes) NS_TO_US(HS_NSECS_ISO(bytes)) |
| |
| extern long usb_calc_bus_time(int speed, int is_input, |
| int isoc, int bytecount); |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| extern void usb_set_device_state(struct usb_device *udev, |
| enum usb_device_state new_state); |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* exported only within usbcore */ |
| |
| extern struct list_head usb_bus_list; |
| extern struct mutex usb_bus_list_lock; |
| extern wait_queue_head_t usb_kill_urb_queue; |
| |
| extern int usb_find_interface_driver(struct usb_device *dev, |
| struct usb_interface *interface); |
| |
| #define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN)) |
| |
| #ifdef CONFIG_PM |
| extern void usb_root_hub_lost_power(struct usb_device *rhdev); |
| extern int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg); |
| extern int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg); |
| #endif /* CONFIG_PM */ |
| |
| #ifdef CONFIG_PM_RUNTIME |
| extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd); |
| #else |
| static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd) |
| { |
| return; |
| } |
| #endif /* CONFIG_PM_RUNTIME */ |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| #if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE) |
| |
| struct usb_mon_operations { |
| void (*urb_submit)(struct usb_bus *bus, struct urb *urb); |
| void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err); |
| void (*urb_complete)(struct usb_bus *bus, struct urb *urb, int status); |
| /* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */ |
| }; |
| |
| extern struct usb_mon_operations *mon_ops; |
| |
| static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) |
| { |
| if (bus->monitored) |
| (*mon_ops->urb_submit)(bus, urb); |
| } |
| |
| static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb, |
| int error) |
| { |
| if (bus->monitored) |
| (*mon_ops->urb_submit_error)(bus, urb, error); |
| } |
| |
| static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb, |
| int status) |
| { |
| if (bus->monitored) |
| (*mon_ops->urb_complete)(bus, urb, status); |
| } |
| |
| int usb_mon_register(struct usb_mon_operations *ops); |
| void usb_mon_deregister(void); |
| |
| #else |
| |
| static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) {} |
| static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb, |
| int error) {} |
| static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb, |
| int status) {} |
| |
| #endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */ |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* random stuff */ |
| |
| #define RUN_CONTEXT (in_irq() ? "in_irq" \ |
| : (in_interrupt() ? "in_interrupt" : "can sleep")) |
| |
| |
| /* This rwsem is for use only by the hub driver and ehci-hcd. |
| * Nobody else should touch it. |
| */ |
| extern struct rw_semaphore ehci_cf_port_reset_rwsem; |
| |
| /* Keep track of which host controller drivers are loaded */ |
| #define USB_UHCI_LOADED 0 |
| #define USB_OHCI_LOADED 1 |
| #define USB_EHCI_LOADED 2 |
| extern unsigned long usb_hcds_loaded; |
| |
| #endif /* __KERNEL__ */ |
| |
| #endif /* __USB_CORE_HCD_H */ |