drm: Introduce drm_fb_helper_prepare()
To implement hotplug detection in a race-free manner, drivers must call
drm_kms_helper_poll_init() before hotplug events can be triggered. Such
events can be triggered right after any of the encoders or connectors
are initialized. At the same time, if the drm_fb_helper_hotplug_event()
helper is used by a driver, then the poll helper requires some parts of
the FB helper to be initialized to prevent a crash.
At the same time, drm_fb_helper_init() requires information that is not
necessarily available at such an early stage (number of CRTCs and
connectors), so it cannot be used yet.
Add a new helper, drm_fb_helper_prepare(), that initializes the bare
minimum needed to allow drm_kms_helper_poll_init() to execute and any
subsequent hotplug events to be processed properly.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
diff --git a/drivers/gpu/drm/armada/armada_fbdev.c b/drivers/gpu/drm/armada/armada_fbdev.c
index a7c947c..7838e73 100644
--- a/drivers/gpu/drm/armada/armada_fbdev.c
+++ b/drivers/gpu/drm/armada/armada_fbdev.c
@@ -149,7 +149,7 @@
priv->fbdev = fbh;
- fbh->funcs = &armada_fb_helper_funcs;
+ drm_fb_helper_prepare(dev, fbh, &armada_fb_helper_funcs);
ret = drm_fb_helper_init(dev, fbh, 1, 1);
if (ret) {
diff --git a/drivers/gpu/drm/ast/ast_fb.c b/drivers/gpu/drm/ast/ast_fb.c
index 2113894..cba45c7 100644
--- a/drivers/gpu/drm/ast/ast_fb.c
+++ b/drivers/gpu/drm/ast/ast_fb.c
@@ -328,8 +328,10 @@
return -ENOMEM;
ast->fbdev = afbdev;
- afbdev->helper.funcs = &ast_fb_helper_funcs;
spin_lock_init(&afbdev->dirty_lock);
+
+ drm_fb_helper_prepare(dev, &afbdev->helper, &ast_fb_helper_funcs);
+
ret = drm_fb_helper_init(dev, &afbdev->helper,
1, 1);
if (ret) {
diff --git a/drivers/gpu/drm/bochs/bochs_fbdev.c b/drivers/gpu/drm/bochs/bochs_fbdev.c
index 17e5c17..19cf3e9 100644
--- a/drivers/gpu/drm/bochs/bochs_fbdev.c
+++ b/drivers/gpu/drm/bochs/bochs_fbdev.c
@@ -189,7 +189,8 @@
{
int ret;
- bochs->fb.helper.funcs = &bochs_fb_helper_funcs;
+ drm_fb_helper_prepare(bochs->dev, &bochs->fb.helper,
+ &bochs_fb_helper_funcs);
ret = drm_fb_helper_init(bochs->dev, &bochs->fb.helper,
1, 1);
diff --git a/drivers/gpu/drm/cirrus/cirrus_fbdev.c b/drivers/gpu/drm/cirrus/cirrus_fbdev.c
index 2bd0291..2a135f2 100644
--- a/drivers/gpu/drm/cirrus/cirrus_fbdev.c
+++ b/drivers/gpu/drm/cirrus/cirrus_fbdev.c
@@ -306,9 +306,11 @@
return -ENOMEM;
cdev->mode_info.gfbdev = gfbdev;
- gfbdev->helper.funcs = &cirrus_fb_helper_funcs;
spin_lock_init(&gfbdev->dirty_lock);
+ drm_fb_helper_prepare(cdev->dev, &gfbdev->helper,
+ &cirrus_fb_helper_funcs);
+
ret = drm_fb_helper_init(cdev->dev, &gfbdev->helper,
cdev->num_crtc, CIRRUSFB_CONN_LIMIT);
if (ret) {
diff --git a/drivers/gpu/drm/drm_fb_cma_helper.c b/drivers/gpu/drm/drm_fb_cma_helper.c
index cb01e16..cc0ae04 100644
--- a/drivers/gpu/drm/drm_fb_cma_helper.c
+++ b/drivers/gpu/drm/drm_fb_cma_helper.c
@@ -354,9 +354,10 @@
return ERR_PTR(-ENOMEM);
}
- fbdev_cma->fb_helper.funcs = &drm_fb_cma_helper_funcs;
helper = &fbdev_cma->fb_helper;
+ drm_fb_helper_prepare(dev, helper, &drm_fb_cma_helper_funcs);
+
ret = drm_fb_helper_init(dev, helper, num_crtc, max_conn_count);
if (ret < 0) {
dev_err(dev->dev, "Failed to initialize drm fb helper.\n");
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index 6cd687a2..bdee6eb 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -49,10 +49,11 @@
* helper functions used by many drivers to implement the kernel mode setting
* interfaces.
*
- * Initialization is done as a three-step process with drm_fb_helper_init(),
- * drm_fb_helper_single_add_all_connectors() and drm_fb_helper_initial_config().
- * Drivers with fancier requirements than the default behaviour can override the
- * second step with their own code. Teardown is done with drm_fb_helper_fini().
+ * Initialization is done as a four-step process with drm_fb_helper_prepare(),
+ * drm_fb_helper_init(), drm_fb_helper_single_add_all_connectors() and
+ * drm_fb_helper_initial_config(). Drivers with fancier requirements than the
+ * default behaviour can override the third step with their own code.
+ * Teardown is done with drm_fb_helper_fini().
*
* At runtime drivers should restore the fbdev console by calling
* drm_fb_helper_restore_fbdev_mode() from their ->lastclose callback. They
@@ -63,6 +64,19 @@
*
* All other functions exported by the fb helper library can be used to
* implement the fbdev driver interface by the driver.
+ *
+ * It is possible, though perhaps somewhat tricky, to implement race-free
+ * hotplug detection using the fbdev helpers. The drm_fb_helper_prepare()
+ * helper must be called first to initialize the minimum required to make
+ * hotplug detection work. Drivers also need to make sure to properly set up
+ * the dev->mode_config.funcs member. After calling drm_kms_helper_poll_init()
+ * it is safe to enable interrupts and start processing hotplug events. At the
+ * same time, drivers should initialize all modeset objects such as CRTCs,
+ * encoders and connectors. To finish up the fbdev helper initialization, the
+ * drm_fb_helper_init() function is called. To probe for all attached displays
+ * and set up an initial configuration using the detected hardware, drivers
+ * should call drm_fb_helper_single_add_all_connectors() followed by
+ * drm_fb_helper_initial_config().
*/
/**
@@ -528,6 +542,24 @@
}
/**
+ * drm_fb_helper_prepare - setup a drm_fb_helper structure
+ * @dev: DRM device
+ * @helper: driver-allocated fbdev helper structure to set up
+ * @funcs: pointer to structure of functions associate with this helper
+ *
+ * Sets up the bare minimum to make the framebuffer helper usable. This is
+ * useful to implement race-free initialization of the polling helpers.
+ */
+void drm_fb_helper_prepare(struct drm_device *dev, struct drm_fb_helper *helper,
+ const struct drm_fb_helper_funcs *funcs)
+{
+ INIT_LIST_HEAD(&helper->kernel_fb_list);
+ helper->funcs = funcs;
+ helper->dev = dev;
+}
+EXPORT_SYMBOL(drm_fb_helper_prepare);
+
+/**
* drm_fb_helper_init - initialize a drm_fb_helper structure
* @dev: drm device
* @fb_helper: driver-allocated fbdev helper structure to initialize
@@ -539,8 +571,7 @@
* nor register the fbdev. This is only done in drm_fb_helper_initial_config()
* to allow driver writes more control over the exact init sequence.
*
- * Drivers must set fb_helper->funcs before calling
- * drm_fb_helper_initial_config().
+ * Drivers must call drm_fb_helper_prepare() before calling this function.
*
* RETURNS:
* Zero if everything went ok, nonzero otherwise.
@@ -555,10 +586,6 @@
if (!max_conn_count)
return -EINVAL;
- fb_helper->dev = dev;
-
- INIT_LIST_HEAD(&fb_helper->kernel_fb_list);
-
fb_helper->crtc_info = kcalloc(crtc_count, sizeof(struct drm_fb_helper_crtc), GFP_KERNEL);
if (!fb_helper->crtc_info)
return -ENOMEM;
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
index fc25fe7..32e63f6 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
@@ -266,7 +266,8 @@
return -ENOMEM;
private->fb_helper = helper = &fbdev->drm_fb_helper;
- helper->funcs = &exynos_drm_fb_helper_funcs;
+
+ drm_fb_helper_prepare(dev, helper, &exynos_drm_fb_helper_funcs);
num_crtc = dev->mode_config.num_crtc;
diff --git a/drivers/gpu/drm/gma500/framebuffer.c b/drivers/gpu/drm/gma500/framebuffer.c
index 76e4d77..d0dd3be 100644
--- a/drivers/gpu/drm/gma500/framebuffer.c
+++ b/drivers/gpu/drm/gma500/framebuffer.c
@@ -600,7 +600,8 @@
}
dev_priv->fbdev = fbdev;
- fbdev->psb_fb_helper.funcs = &psb_fb_helper_funcs;
+
+ drm_fb_helper_prepare(dev, &fbdev->psb_fb_helper, &psb_fb_helper_funcs);
drm_fb_helper_init(dev, &fbdev->psb_fb_helper, dev_priv->ops->crtcs,
INTELFB_CONN_LIMIT);
diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c
index c942d13..347d162 100644
--- a/drivers/gpu/drm/i915/intel_fbdev.c
+++ b/drivers/gpu/drm/i915/intel_fbdev.c
@@ -623,7 +623,8 @@
if (ifbdev == NULL)
return -ENOMEM;
- ifbdev->helper.funcs = &intel_fb_helper_funcs;
+ drm_fb_helper_prepare(dev, &ifbdev->helper, &intel_fb_helper_funcs);
+
if (!intel_fbdev_init_bios(dev, ifbdev))
ifbdev->preferred_bpp = 32;
diff --git a/drivers/gpu/drm/mgag200/mgag200_fb.c b/drivers/gpu/drm/mgag200/mgag200_fb.c
index a4319ab..5451dc5 100644
--- a/drivers/gpu/drm/mgag200/mgag200_fb.c
+++ b/drivers/gpu/drm/mgag200/mgag200_fb.c
@@ -293,9 +293,10 @@
return -ENOMEM;
mdev->mfbdev = mfbdev;
- mfbdev->helper.funcs = &mga_fb_helper_funcs;
spin_lock_init(&mfbdev->dirty_lock);
+ drm_fb_helper_prepare(mdev->dev, &mfbdev->helper, &mga_fb_helper_funcs);
+
ret = drm_fb_helper_init(mdev->dev, &mfbdev->helper,
mdev->num_crtc, MGAG200FB_CONN_LIMIT);
if (ret)
diff --git a/drivers/gpu/drm/msm/msm_fbdev.c b/drivers/gpu/drm/msm/msm_fbdev.c
index 7e706c4..c437065 100644
--- a/drivers/gpu/drm/msm/msm_fbdev.c
+++ b/drivers/gpu/drm/msm/msm_fbdev.c
@@ -197,7 +197,7 @@
helper = &fbdev->base;
- helper->funcs = &msm_fb_helper_funcs;
+ drm_fb_helper_prepare(dev, helper, &msm_fb_helper_funcs);
ret = drm_fb_helper_init(dev, helper,
priv->num_crtcs, priv->num_connectors);
diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
index 8e9c07b..afe706a 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
@@ -464,7 +464,8 @@
fbcon->dev = dev;
drm->fbcon = fbcon;
- fbcon->helper.funcs = &nouveau_fbcon_helper_funcs;
+
+ drm_fb_helper_prepare(dev, &fbcon->helper, &nouveau_fbcon_helper_funcs);
ret = drm_fb_helper_init(dev, &fbcon->helper,
dev->mode_config.num_crtc, 4);
diff --git a/drivers/gpu/drm/omapdrm/omap_fbdev.c b/drivers/gpu/drm/omapdrm/omap_fbdev.c
index 4cb1208..8436c68 100644
--- a/drivers/gpu/drm/omapdrm/omap_fbdev.c
+++ b/drivers/gpu/drm/omapdrm/omap_fbdev.c
@@ -325,7 +325,7 @@
helper = &fbdev->base;
- helper->funcs = &omap_fb_helper_funcs;
+ drm_fb_helper_prepare(dev, helper, &omap_fb_helper_funcs);
ret = drm_fb_helper_init(dev, helper,
priv->num_crtcs, priv->num_connectors);
diff --git a/drivers/gpu/drm/qxl/qxl_fb.c b/drivers/gpu/drm/qxl/qxl_fb.c
index cf89614..df56788 100644
--- a/drivers/gpu/drm/qxl/qxl_fb.c
+++ b/drivers/gpu/drm/qxl/qxl_fb.c
@@ -676,9 +676,12 @@
qfbdev->qdev = qdev;
qdev->mode_info.qfbdev = qfbdev;
- qfbdev->helper.funcs = &qxl_fb_helper_funcs;
spin_lock_init(&qfbdev->delayed_ops_lock);
INIT_LIST_HEAD(&qfbdev->delayed_ops);
+
+ drm_fb_helper_prepare(qdev->ddev, &qfbdev->helper,
+ &qxl_fb_helper_funcs);
+
ret = drm_fb_helper_init(qdev->ddev, &qfbdev->helper,
qxl_num_crtc /* num_crtc - QXL supports just 1 */,
QXLFB_CONN_LIMIT);
diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c
index ad97afd..db598d7 100644
--- a/drivers/gpu/drm/radeon/radeon_fb.c
+++ b/drivers/gpu/drm/radeon/radeon_fb.c
@@ -353,7 +353,9 @@
rfbdev->rdev = rdev;
rdev->mode_info.rfbdev = rfbdev;
- rfbdev->helper.funcs = &radeon_fb_helper_funcs;
+
+ drm_fb_helper_prepare(rdev->ddev, &rfbdev->helper,
+ &radeon_fb_helper_funcs);
ret = drm_fb_helper_init(rdev->ddev, &rfbdev->helper,
rdev->num_crtc,
diff --git a/drivers/gpu/drm/tegra/fb.c b/drivers/gpu/drm/tegra/fb.c
index f7cf47b..d5d53aa 100644
--- a/drivers/gpu/drm/tegra/fb.c
+++ b/drivers/gpu/drm/tegra/fb.c
@@ -276,7 +276,6 @@
unsigned int num_crtc,
unsigned int max_connectors)
{
- struct drm_fb_helper *helper;
struct tegra_fbdev *fbdev;
int err;
@@ -286,8 +285,7 @@
return ERR_PTR(-ENOMEM);
}
- fbdev->base.funcs = &tegra_fb_helper_funcs;
- helper = &fbdev->base;
+ drm_fb_helper_prepare(drm, &fbdev->base, &tegra_fb_helper_funcs);
err = drm_fb_helper_init(drm, &fbdev->base, num_crtc, max_connectors);
if (err < 0) {
diff --git a/drivers/gpu/drm/udl/udl_fb.c b/drivers/gpu/drm/udl/udl_fb.c
index 0647c8c..d1da339 100644
--- a/drivers/gpu/drm/udl/udl_fb.c
+++ b/drivers/gpu/drm/udl/udl_fb.c
@@ -583,7 +583,8 @@
return -ENOMEM;
udl->fbdev = ufbdev;
- ufbdev->helper.funcs = &udl_fb_helper_funcs;
+
+ drm_fb_helper_prepare(dev, &ufbdev->helper, &udl_fb_helper_funcs);
ret = drm_fb_helper_init(dev, &ufbdev->helper,
1, 1);