| /* |
| * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation |
| * |
| * Rewrite, cleanup: |
| * |
| * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation |
| * Copyright (C) 2006 Olof Johansson <olof@lixom.net> |
| * |
| * Dynamic DMA mapping support, pSeries-specific parts, both SMP and LPAR. |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/slab.h> |
| #include <linux/mm.h> |
| #include <linux/memblock.h> |
| #include <linux/spinlock.h> |
| #include <linux/sched.h> /* for show_stack */ |
| #include <linux/string.h> |
| #include <linux/pci.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/crash_dump.h> |
| #include <linux/memory.h> |
| #include <linux/of.h> |
| #include <asm/io.h> |
| #include <asm/prom.h> |
| #include <asm/rtas.h> |
| #include <asm/iommu.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/machdep.h> |
| #include <asm/firmware.h> |
| #include <asm/tce.h> |
| #include <asm/ppc-pci.h> |
| #include <asm/udbg.h> |
| #include <asm/mmzone.h> |
| #include <asm/plpar_wrappers.h> |
| |
| |
| static void tce_invalidate_pSeries_sw(struct iommu_table *tbl, |
| __be64 *startp, __be64 *endp) |
| { |
| u64 __iomem *invalidate = (u64 __iomem *)tbl->it_index; |
| unsigned long start, end, inc; |
| |
| start = __pa(startp); |
| end = __pa(endp); |
| inc = L1_CACHE_BYTES; /* invalidate a cacheline of TCEs at a time */ |
| |
| /* If this is non-zero, change the format. We shift the |
| * address and or in the magic from the device tree. */ |
| if (tbl->it_busno) { |
| start <<= 12; |
| end <<= 12; |
| inc <<= 12; |
| start |= tbl->it_busno; |
| end |= tbl->it_busno; |
| } |
| |
| end |= inc - 1; /* round up end to be different than start */ |
| |
| mb(); /* Make sure TCEs in memory are written */ |
| while (start <= end) { |
| out_be64(invalidate, start); |
| start += inc; |
| } |
| } |
| |
| static int tce_build_pSeries(struct iommu_table *tbl, long index, |
| long npages, unsigned long uaddr, |
| enum dma_data_direction direction, |
| struct dma_attrs *attrs) |
| { |
| u64 proto_tce; |
| __be64 *tcep, *tces; |
| u64 rpn; |
| |
| proto_tce = TCE_PCI_READ; // Read allowed |
| |
| if (direction != DMA_TO_DEVICE) |
| proto_tce |= TCE_PCI_WRITE; |
| |
| tces = tcep = ((__be64 *)tbl->it_base) + index; |
| |
| while (npages--) { |
| /* can't move this out since we might cross MEMBLOCK boundary */ |
| rpn = __pa(uaddr) >> TCE_SHIFT; |
| *tcep = cpu_to_be64(proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT); |
| |
| uaddr += TCE_PAGE_SIZE; |
| tcep++; |
| } |
| |
| if (tbl->it_type & TCE_PCI_SWINV_CREATE) |
| tce_invalidate_pSeries_sw(tbl, tces, tcep - 1); |
| return 0; |
| } |
| |
| |
| static void tce_free_pSeries(struct iommu_table *tbl, long index, long npages) |
| { |
| __be64 *tcep, *tces; |
| |
| tces = tcep = ((__be64 *)tbl->it_base) + index; |
| |
| while (npages--) |
| *(tcep++) = 0; |
| |
| if (tbl->it_type & TCE_PCI_SWINV_FREE) |
| tce_invalidate_pSeries_sw(tbl, tces, tcep - 1); |
| } |
| |
| static unsigned long tce_get_pseries(struct iommu_table *tbl, long index) |
| { |
| __be64 *tcep; |
| |
| tcep = ((__be64 *)tbl->it_base) + index; |
| |
| return be64_to_cpu(*tcep); |
| } |
| |
| static void tce_free_pSeriesLP(struct iommu_table*, long, long); |
| static void tce_freemulti_pSeriesLP(struct iommu_table*, long, long); |
| |
| static int tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum, |
| long npages, unsigned long uaddr, |
| enum dma_data_direction direction, |
| struct dma_attrs *attrs) |
| { |
| u64 rc = 0; |
| u64 proto_tce, tce; |
| u64 rpn; |
| int ret = 0; |
| long tcenum_start = tcenum, npages_start = npages; |
| |
| rpn = __pa(uaddr) >> TCE_SHIFT; |
| proto_tce = TCE_PCI_READ; |
| if (direction != DMA_TO_DEVICE) |
| proto_tce |= TCE_PCI_WRITE; |
| |
| while (npages--) { |
| tce = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT; |
| rc = plpar_tce_put((u64)tbl->it_index, (u64)tcenum << 12, tce); |
| |
| if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) { |
| ret = (int)rc; |
| tce_free_pSeriesLP(tbl, tcenum_start, |
| (npages_start - (npages + 1))); |
| break; |
| } |
| |
| if (rc && printk_ratelimit()) { |
| printk("tce_build_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc); |
| printk("\tindex = 0x%llx\n", (u64)tbl->it_index); |
| printk("\ttcenum = 0x%llx\n", (u64)tcenum); |
| printk("\ttce val = 0x%llx\n", tce ); |
| show_stack(current, (unsigned long *)__get_SP()); |
| } |
| |
| tcenum++; |
| rpn++; |
| } |
| return ret; |
| } |
| |
| static DEFINE_PER_CPU(__be64 *, tce_page); |
| |
| static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum, |
| long npages, unsigned long uaddr, |
| enum dma_data_direction direction, |
| struct dma_attrs *attrs) |
| { |
| u64 rc = 0; |
| u64 proto_tce; |
| __be64 *tcep; |
| u64 rpn; |
| long l, limit; |
| long tcenum_start = tcenum, npages_start = npages; |
| int ret = 0; |
| unsigned long flags; |
| |
| if (npages == 1) { |
| return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr, |
| direction, attrs); |
| } |
| |
| local_irq_save(flags); /* to protect tcep and the page behind it */ |
| |
| tcep = __get_cpu_var(tce_page); |
| |
| /* This is safe to do since interrupts are off when we're called |
| * from iommu_alloc{,_sg}() |
| */ |
| if (!tcep) { |
| tcep = (__be64 *)__get_free_page(GFP_ATOMIC); |
| /* If allocation fails, fall back to the loop implementation */ |
| if (!tcep) { |
| local_irq_restore(flags); |
| return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr, |
| direction, attrs); |
| } |
| __get_cpu_var(tce_page) = tcep; |
| } |
| |
| rpn = __pa(uaddr) >> TCE_SHIFT; |
| proto_tce = TCE_PCI_READ; |
| if (direction != DMA_TO_DEVICE) |
| proto_tce |= TCE_PCI_WRITE; |
| |
| /* We can map max one pageful of TCEs at a time */ |
| do { |
| /* |
| * Set up the page with TCE data, looping through and setting |
| * the values. |
| */ |
| limit = min_t(long, npages, 4096/TCE_ENTRY_SIZE); |
| |
| for (l = 0; l < limit; l++) { |
| tcep[l] = cpu_to_be64(proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT); |
| rpn++; |
| } |
| |
| rc = plpar_tce_put_indirect((u64)tbl->it_index, |
| (u64)tcenum << 12, |
| (u64)__pa(tcep), |
| limit); |
| |
| npages -= limit; |
| tcenum += limit; |
| } while (npages > 0 && !rc); |
| |
| local_irq_restore(flags); |
| |
| if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) { |
| ret = (int)rc; |
| tce_freemulti_pSeriesLP(tbl, tcenum_start, |
| (npages_start - (npages + limit))); |
| return ret; |
| } |
| |
| if (rc && printk_ratelimit()) { |
| printk("tce_buildmulti_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc); |
| printk("\tindex = 0x%llx\n", (u64)tbl->it_index); |
| printk("\tnpages = 0x%llx\n", (u64)npages); |
| printk("\ttce[0] val = 0x%llx\n", tcep[0]); |
| show_stack(current, (unsigned long *)__get_SP()); |
| } |
| return ret; |
| } |
| |
| static void tce_free_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages) |
| { |
| u64 rc; |
| |
| while (npages--) { |
| rc = plpar_tce_put((u64)tbl->it_index, (u64)tcenum << 12, 0); |
| |
| if (rc && printk_ratelimit()) { |
| printk("tce_free_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc); |
| printk("\tindex = 0x%llx\n", (u64)tbl->it_index); |
| printk("\ttcenum = 0x%llx\n", (u64)tcenum); |
| show_stack(current, (unsigned long *)__get_SP()); |
| } |
| |
| tcenum++; |
| } |
| } |
| |
| |
| static void tce_freemulti_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages) |
| { |
| u64 rc; |
| |
| rc = plpar_tce_stuff((u64)tbl->it_index, (u64)tcenum << 12, 0, npages); |
| |
| if (rc && printk_ratelimit()) { |
| printk("tce_freemulti_pSeriesLP: plpar_tce_stuff failed\n"); |
| printk("\trc = %lld\n", rc); |
| printk("\tindex = 0x%llx\n", (u64)tbl->it_index); |
| printk("\tnpages = 0x%llx\n", (u64)npages); |
| show_stack(current, (unsigned long *)__get_SP()); |
| } |
| } |
| |
| static unsigned long tce_get_pSeriesLP(struct iommu_table *tbl, long tcenum) |
| { |
| u64 rc; |
| unsigned long tce_ret; |
| |
| rc = plpar_tce_get((u64)tbl->it_index, (u64)tcenum << 12, &tce_ret); |
| |
| if (rc && printk_ratelimit()) { |
| printk("tce_get_pSeriesLP: plpar_tce_get failed. rc=%lld\n", rc); |
| printk("\tindex = 0x%llx\n", (u64)tbl->it_index); |
| printk("\ttcenum = 0x%llx\n", (u64)tcenum); |
| show_stack(current, (unsigned long *)__get_SP()); |
| } |
| |
| return tce_ret; |
| } |
| |
| /* this is compatible with cells for the device tree property */ |
| struct dynamic_dma_window_prop { |
| __be32 liobn; /* tce table number */ |
| __be64 dma_base; /* address hi,lo */ |
| __be32 tce_shift; /* ilog2(tce_page_size) */ |
| __be32 window_shift; /* ilog2(tce_window_size) */ |
| }; |
| |
| struct direct_window { |
| struct device_node *device; |
| const struct dynamic_dma_window_prop *prop; |
| struct list_head list; |
| }; |
| |
| /* Dynamic DMA Window support */ |
| struct ddw_query_response { |
| __be32 windows_available; |
| __be32 largest_available_block; |
| __be32 page_size; |
| __be32 migration_capable; |
| }; |
| |
| struct ddw_create_response { |
| __be32 liobn; |
| __be32 addr_hi; |
| __be32 addr_lo; |
| }; |
| |
| static LIST_HEAD(direct_window_list); |
| /* prevents races between memory on/offline and window creation */ |
| static DEFINE_SPINLOCK(direct_window_list_lock); |
| /* protects initializing window twice for same device */ |
| static DEFINE_MUTEX(direct_window_init_mutex); |
| #define DIRECT64_PROPNAME "linux,direct64-ddr-window-info" |
| |
| static int tce_clearrange_multi_pSeriesLP(unsigned long start_pfn, |
| unsigned long num_pfn, const void *arg) |
| { |
| const struct dynamic_dma_window_prop *maprange = arg; |
| int rc; |
| u64 tce_size, num_tce, dma_offset, next; |
| u32 tce_shift; |
| long limit; |
| |
| tce_shift = be32_to_cpu(maprange->tce_shift); |
| tce_size = 1ULL << tce_shift; |
| next = start_pfn << PAGE_SHIFT; |
| num_tce = num_pfn << PAGE_SHIFT; |
| |
| /* round back to the beginning of the tce page size */ |
| num_tce += next & (tce_size - 1); |
| next &= ~(tce_size - 1); |
| |
| /* covert to number of tces */ |
| num_tce |= tce_size - 1; |
| num_tce >>= tce_shift; |
| |
| do { |
| /* |
| * Set up the page with TCE data, looping through and setting |
| * the values. |
| */ |
| limit = min_t(long, num_tce, 512); |
| dma_offset = next + be64_to_cpu(maprange->dma_base); |
| |
| rc = plpar_tce_stuff((u64)be32_to_cpu(maprange->liobn), |
| dma_offset, |
| 0, limit); |
| next += limit * tce_size; |
| num_tce -= limit; |
| } while (num_tce > 0 && !rc); |
| |
| return rc; |
| } |
| |
| static int tce_setrange_multi_pSeriesLP(unsigned long start_pfn, |
| unsigned long num_pfn, const void *arg) |
| { |
| const struct dynamic_dma_window_prop *maprange = arg; |
| u64 tce_size, num_tce, dma_offset, next, proto_tce, liobn; |
| __be64 *tcep; |
| u32 tce_shift; |
| u64 rc = 0; |
| long l, limit; |
| |
| local_irq_disable(); /* to protect tcep and the page behind it */ |
| tcep = __get_cpu_var(tce_page); |
| |
| if (!tcep) { |
| tcep = (__be64 *)__get_free_page(GFP_ATOMIC); |
| if (!tcep) { |
| local_irq_enable(); |
| return -ENOMEM; |
| } |
| __get_cpu_var(tce_page) = tcep; |
| } |
| |
| proto_tce = TCE_PCI_READ | TCE_PCI_WRITE; |
| |
| liobn = (u64)be32_to_cpu(maprange->liobn); |
| tce_shift = be32_to_cpu(maprange->tce_shift); |
| tce_size = 1ULL << tce_shift; |
| next = start_pfn << PAGE_SHIFT; |
| num_tce = num_pfn << PAGE_SHIFT; |
| |
| /* round back to the beginning of the tce page size */ |
| num_tce += next & (tce_size - 1); |
| next &= ~(tce_size - 1); |
| |
| /* covert to number of tces */ |
| num_tce |= tce_size - 1; |
| num_tce >>= tce_shift; |
| |
| /* We can map max one pageful of TCEs at a time */ |
| do { |
| /* |
| * Set up the page with TCE data, looping through and setting |
| * the values. |
| */ |
| limit = min_t(long, num_tce, 4096/TCE_ENTRY_SIZE); |
| dma_offset = next + be64_to_cpu(maprange->dma_base); |
| |
| for (l = 0; l < limit; l++) { |
| tcep[l] = cpu_to_be64(proto_tce | next); |
| next += tce_size; |
| } |
| |
| rc = plpar_tce_put_indirect(liobn, |
| dma_offset, |
| (u64)__pa(tcep), |
| limit); |
| |
| num_tce -= limit; |
| } while (num_tce > 0 && !rc); |
| |
| /* error cleanup: caller will clear whole range */ |
| |
| local_irq_enable(); |
| return rc; |
| } |
| |
| static int tce_setrange_multi_pSeriesLP_walk(unsigned long start_pfn, |
| unsigned long num_pfn, void *arg) |
| { |
| return tce_setrange_multi_pSeriesLP(start_pfn, num_pfn, arg); |
| } |
| |
| |
| #ifdef CONFIG_PCI |
| static void iommu_table_setparms(struct pci_controller *phb, |
| struct device_node *dn, |
| struct iommu_table *tbl) |
| { |
| struct device_node *node; |
| const unsigned long *basep, *sw_inval; |
| const u32 *sizep; |
| |
| node = phb->dn; |
| |
| basep = of_get_property(node, "linux,tce-base", NULL); |
| sizep = of_get_property(node, "linux,tce-size", NULL); |
| if (basep == NULL || sizep == NULL) { |
| printk(KERN_ERR "PCI_DMA: iommu_table_setparms: %s has " |
| "missing tce entries !\n", dn->full_name); |
| return; |
| } |
| |
| tbl->it_base = (unsigned long)__va(*basep); |
| |
| if (!is_kdump_kernel()) |
| memset((void *)tbl->it_base, 0, *sizep); |
| |
| tbl->it_busno = phb->bus->number; |
| |
| /* Units of tce entries */ |
| tbl->it_offset = phb->dma_window_base_cur >> IOMMU_PAGE_SHIFT; |
| |
| /* Test if we are going over 2GB of DMA space */ |
| if (phb->dma_window_base_cur + phb->dma_window_size > 0x80000000ul) { |
| udbg_printf("PCI_DMA: Unexpected number of IOAs under this PHB.\n"); |
| panic("PCI_DMA: Unexpected number of IOAs under this PHB.\n"); |
| } |
| |
| phb->dma_window_base_cur += phb->dma_window_size; |
| |
| /* Set the tce table size - measured in entries */ |
| tbl->it_size = phb->dma_window_size >> IOMMU_PAGE_SHIFT; |
| |
| tbl->it_index = 0; |
| tbl->it_blocksize = 16; |
| tbl->it_type = TCE_PCI; |
| |
| sw_inval = of_get_property(node, "linux,tce-sw-invalidate-info", NULL); |
| if (sw_inval) { |
| /* |
| * This property contains information on how to |
| * invalidate the TCE entry. The first property is |
| * the base MMIO address used to invalidate entries. |
| * The second property tells us the format of the TCE |
| * invalidate (whether it needs to be shifted) and |
| * some magic routing info to add to our invalidate |
| * command. |
| */ |
| tbl->it_index = (unsigned long) ioremap(sw_inval[0], 8); |
| tbl->it_busno = sw_inval[1]; /* overload this with magic */ |
| tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE; |
| } |
| } |
| |
| /* |
| * iommu_table_setparms_lpar |
| * |
| * Function: On pSeries LPAR systems, return TCE table info, given a pci bus. |
| */ |
| static void iommu_table_setparms_lpar(struct pci_controller *phb, |
| struct device_node *dn, |
| struct iommu_table *tbl, |
| const __be32 *dma_window) |
| { |
| unsigned long offset, size; |
| |
| of_parse_dma_window(dn, dma_window, &tbl->it_index, &offset, &size); |
| |
| tbl->it_busno = phb->bus->number; |
| tbl->it_base = 0; |
| tbl->it_blocksize = 16; |
| tbl->it_type = TCE_PCI; |
| tbl->it_offset = offset >> IOMMU_PAGE_SHIFT; |
| tbl->it_size = size >> IOMMU_PAGE_SHIFT; |
| } |
| |
| static void pci_dma_bus_setup_pSeries(struct pci_bus *bus) |
| { |
| struct device_node *dn; |
| struct iommu_table *tbl; |
| struct device_node *isa_dn, *isa_dn_orig; |
| struct device_node *tmp; |
| struct pci_dn *pci; |
| int children; |
| |
| dn = pci_bus_to_OF_node(bus); |
| |
| pr_debug("pci_dma_bus_setup_pSeries: setting up bus %s\n", dn->full_name); |
| |
| if (bus->self) { |
| /* This is not a root bus, any setup will be done for the |
| * device-side of the bridge in iommu_dev_setup_pSeries(). |
| */ |
| return; |
| } |
| pci = PCI_DN(dn); |
| |
| /* Check if the ISA bus on the system is under |
| * this PHB. |
| */ |
| isa_dn = isa_dn_orig = of_find_node_by_type(NULL, "isa"); |
| |
| while (isa_dn && isa_dn != dn) |
| isa_dn = isa_dn->parent; |
| |
| if (isa_dn_orig) |
| of_node_put(isa_dn_orig); |
| |
| /* Count number of direct PCI children of the PHB. */ |
| for (children = 0, tmp = dn->child; tmp; tmp = tmp->sibling) |
| children++; |
| |
| pr_debug("Children: %d\n", children); |
| |
| /* Calculate amount of DMA window per slot. Each window must be |
| * a power of two (due to pci_alloc_consistent requirements). |
| * |
| * Keep 256MB aside for PHBs with ISA. |
| */ |
| |
| if (!isa_dn) { |
| /* No ISA/IDE - just set window size and return */ |
| pci->phb->dma_window_size = 0x80000000ul; /* To be divided */ |
| |
| while (pci->phb->dma_window_size * children > 0x80000000ul) |
| pci->phb->dma_window_size >>= 1; |
| pr_debug("No ISA/IDE, window size is 0x%llx\n", |
| pci->phb->dma_window_size); |
| pci->phb->dma_window_base_cur = 0; |
| |
| return; |
| } |
| |
| /* If we have ISA, then we probably have an IDE |
| * controller too. Allocate a 128MB table but |
| * skip the first 128MB to avoid stepping on ISA |
| * space. |
| */ |
| pci->phb->dma_window_size = 0x8000000ul; |
| pci->phb->dma_window_base_cur = 0x8000000ul; |
| |
| tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL, |
| pci->phb->node); |
| |
| iommu_table_setparms(pci->phb, dn, tbl); |
| pci->iommu_table = iommu_init_table(tbl, pci->phb->node); |
| iommu_register_group(tbl, pci_domain_nr(bus), 0); |
| |
| /* Divide the rest (1.75GB) among the children */ |
| pci->phb->dma_window_size = 0x80000000ul; |
| while (pci->phb->dma_window_size * children > 0x70000000ul) |
| pci->phb->dma_window_size >>= 1; |
| |
| pr_debug("ISA/IDE, window size is 0x%llx\n", pci->phb->dma_window_size); |
| } |
| |
| |
| static void pci_dma_bus_setup_pSeriesLP(struct pci_bus *bus) |
| { |
| struct iommu_table *tbl; |
| struct device_node *dn, *pdn; |
| struct pci_dn *ppci; |
| const __be32 *dma_window = NULL; |
| |
| dn = pci_bus_to_OF_node(bus); |
| |
| pr_debug("pci_dma_bus_setup_pSeriesLP: setting up bus %s\n", |
| dn->full_name); |
| |
| /* Find nearest ibm,dma-window, walking up the device tree */ |
| for (pdn = dn; pdn != NULL; pdn = pdn->parent) { |
| dma_window = of_get_property(pdn, "ibm,dma-window", NULL); |
| if (dma_window != NULL) |
| break; |
| } |
| |
| if (dma_window == NULL) { |
| pr_debug(" no ibm,dma-window property !\n"); |
| return; |
| } |
| |
| ppci = PCI_DN(pdn); |
| |
| pr_debug(" parent is %s, iommu_table: 0x%p\n", |
| pdn->full_name, ppci->iommu_table); |
| |
| if (!ppci->iommu_table) { |
| tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL, |
| ppci->phb->node); |
| iommu_table_setparms_lpar(ppci->phb, pdn, tbl, dma_window); |
| ppci->iommu_table = iommu_init_table(tbl, ppci->phb->node); |
| iommu_register_group(tbl, pci_domain_nr(bus), 0); |
| pr_debug(" created table: %p\n", ppci->iommu_table); |
| } |
| } |
| |
| |
| static void pci_dma_dev_setup_pSeries(struct pci_dev *dev) |
| { |
| struct device_node *dn; |
| struct iommu_table *tbl; |
| |
| pr_debug("pci_dma_dev_setup_pSeries: %s\n", pci_name(dev)); |
| |
| dn = dev->dev.of_node; |
| |
| /* If we're the direct child of a root bus, then we need to allocate |
| * an iommu table ourselves. The bus setup code should have setup |
| * the window sizes already. |
| */ |
| if (!dev->bus->self) { |
| struct pci_controller *phb = PCI_DN(dn)->phb; |
| |
| pr_debug(" --> first child, no bridge. Allocating iommu table.\n"); |
| tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL, |
| phb->node); |
| iommu_table_setparms(phb, dn, tbl); |
| PCI_DN(dn)->iommu_table = iommu_init_table(tbl, phb->node); |
| iommu_register_group(tbl, pci_domain_nr(phb->bus), 0); |
| set_iommu_table_base(&dev->dev, PCI_DN(dn)->iommu_table); |
| return; |
| } |
| |
| /* If this device is further down the bus tree, search upwards until |
| * an already allocated iommu table is found and use that. |
| */ |
| |
| while (dn && PCI_DN(dn) && PCI_DN(dn)->iommu_table == NULL) |
| dn = dn->parent; |
| |
| if (dn && PCI_DN(dn)) |
| set_iommu_table_base(&dev->dev, PCI_DN(dn)->iommu_table); |
| else |
| printk(KERN_WARNING "iommu: Device %s has no iommu table\n", |
| pci_name(dev)); |
| } |
| |
| static int __read_mostly disable_ddw; |
| |
| static int __init disable_ddw_setup(char *str) |
| { |
| disable_ddw = 1; |
| printk(KERN_INFO "ppc iommu: disabling ddw.\n"); |
| |
| return 0; |
| } |
| |
| early_param("disable_ddw", disable_ddw_setup); |
| |
| static inline void __remove_ddw(struct device_node *np, const u32 *ddw_avail, u64 liobn) |
| { |
| int ret; |
| |
| ret = rtas_call(ddw_avail[2], 1, 1, NULL, liobn); |
| if (ret) |
| pr_warning("%s: failed to remove DMA window: rtas returned " |
| "%d to ibm,remove-pe-dma-window(%x) %llx\n", |
| np->full_name, ret, ddw_avail[2], liobn); |
| else |
| pr_debug("%s: successfully removed DMA window: rtas returned " |
| "%d to ibm,remove-pe-dma-window(%x) %llx\n", |
| np->full_name, ret, ddw_avail[2], liobn); |
| } |
| |
| static void remove_ddw(struct device_node *np) |
| { |
| struct dynamic_dma_window_prop *dwp; |
| struct property *win64; |
| const u32 *ddw_avail; |
| u64 liobn; |
| int len, ret; |
| |
| ddw_avail = of_get_property(np, "ibm,ddw-applicable", &len); |
| win64 = of_find_property(np, DIRECT64_PROPNAME, NULL); |
| if (!win64) |
| return; |
| |
| if (!ddw_avail || len < 3 * sizeof(u32) || win64->length < sizeof(*dwp)) |
| goto delprop; |
| |
| dwp = win64->value; |
| liobn = (u64)be32_to_cpu(dwp->liobn); |
| |
| /* clear the whole window, note the arg is in kernel pages */ |
| ret = tce_clearrange_multi_pSeriesLP(0, |
| 1ULL << (be32_to_cpu(dwp->window_shift) - PAGE_SHIFT), dwp); |
| if (ret) |
| pr_warning("%s failed to clear tces in window.\n", |
| np->full_name); |
| else |
| pr_debug("%s successfully cleared tces in window.\n", |
| np->full_name); |
| |
| __remove_ddw(np, ddw_avail, liobn); |
| |
| delprop: |
| ret = of_remove_property(np, win64); |
| if (ret) |
| pr_warning("%s: failed to remove direct window property: %d\n", |
| np->full_name, ret); |
| } |
| |
| static u64 find_existing_ddw(struct device_node *pdn) |
| { |
| struct direct_window *window; |
| const struct dynamic_dma_window_prop *direct64; |
| u64 dma_addr = 0; |
| |
| spin_lock(&direct_window_list_lock); |
| /* check if we already created a window and dupe that config if so */ |
| list_for_each_entry(window, &direct_window_list, list) { |
| if (window->device == pdn) { |
| direct64 = window->prop; |
| dma_addr = be64_to_cpu(direct64->dma_base); |
| break; |
| } |
| } |
| spin_unlock(&direct_window_list_lock); |
| |
| return dma_addr; |
| } |
| |
| static void __restore_default_window(struct eeh_dev *edev, |
| u32 ddw_restore_token) |
| { |
| u32 cfg_addr; |
| u64 buid; |
| int ret; |
| |
| /* |
| * Get the config address and phb buid of the PE window. |
| * Rely on eeh to retrieve this for us. |
| * Retrieve them from the pci device, not the node with the |
| * dma-window property |
| */ |
| cfg_addr = edev->config_addr; |
| if (edev->pe_config_addr) |
| cfg_addr = edev->pe_config_addr; |
| buid = edev->phb->buid; |
| |
| do { |
| ret = rtas_call(ddw_restore_token, 3, 1, NULL, cfg_addr, |
| BUID_HI(buid), BUID_LO(buid)); |
| } while (rtas_busy_delay(ret)); |
| pr_info("ibm,reset-pe-dma-windows(%x) %x %x %x returned %d\n", |
| ddw_restore_token, cfg_addr, BUID_HI(buid), BUID_LO(buid), ret); |
| } |
| |
| static int find_existing_ddw_windows(void) |
| { |
| struct device_node *pdn; |
| const struct dynamic_dma_window_prop *direct64; |
| const u32 *ddw_extensions; |
| |
| if (!firmware_has_feature(FW_FEATURE_LPAR)) |
| return 0; |
| |
| for_each_node_with_property(pdn, DIRECT64_PROPNAME) { |
| direct64 = of_get_property(pdn, DIRECT64_PROPNAME, NULL); |
| if (!direct64) |
| continue; |
| |
| /* |
| * We need to ensure the IOMMU table is active when we |
| * return from the IOMMU setup so that the common code |
| * can clear the table or find the holes. To that end, |
| * first, remove any existing DDW configuration. |
| */ |
| remove_ddw(pdn); |
| |
| /* |
| * Second, if we are running on a new enough level of |
| * firmware where the restore API is present, use it to |
| * restore the 32-bit window, which was removed in |
| * create_ddw. |
| * If the API is not present, then create_ddw couldn't |
| * have removed the 32-bit window in the first place, so |
| * removing the DDW configuration should be sufficient. |
| */ |
| ddw_extensions = of_get_property(pdn, "ibm,ddw-extensions", |
| NULL); |
| if (ddw_extensions && ddw_extensions[0] > 0) |
| __restore_default_window(of_node_to_eeh_dev(pdn), |
| ddw_extensions[1]); |
| } |
| |
| return 0; |
| } |
| machine_arch_initcall(pseries, find_existing_ddw_windows); |
| |
| static int query_ddw(struct pci_dev *dev, const u32 *ddw_avail, |
| struct ddw_query_response *query) |
| { |
| struct eeh_dev *edev; |
| u32 cfg_addr; |
| u64 buid; |
| int ret; |
| |
| /* |
| * Get the config address and phb buid of the PE window. |
| * Rely on eeh to retrieve this for us. |
| * Retrieve them from the pci device, not the node with the |
| * dma-window property |
| */ |
| edev = pci_dev_to_eeh_dev(dev); |
| cfg_addr = edev->config_addr; |
| if (edev->pe_config_addr) |
| cfg_addr = edev->pe_config_addr; |
| buid = edev->phb->buid; |
| |
| ret = rtas_call(ddw_avail[0], 3, 5, (u32 *)query, |
| cfg_addr, BUID_HI(buid), BUID_LO(buid)); |
| dev_info(&dev->dev, "ibm,query-pe-dma-windows(%x) %x %x %x" |
| " returned %d\n", ddw_avail[0], cfg_addr, BUID_HI(buid), |
| BUID_LO(buid), ret); |
| return ret; |
| } |
| |
| static int create_ddw(struct pci_dev *dev, const u32 *ddw_avail, |
| struct ddw_create_response *create, int page_shift, |
| int window_shift) |
| { |
| struct eeh_dev *edev; |
| u32 cfg_addr; |
| u64 buid; |
| int ret; |
| |
| /* |
| * Get the config address and phb buid of the PE window. |
| * Rely on eeh to retrieve this for us. |
| * Retrieve them from the pci device, not the node with the |
| * dma-window property |
| */ |
| edev = pci_dev_to_eeh_dev(dev); |
| cfg_addr = edev->config_addr; |
| if (edev->pe_config_addr) |
| cfg_addr = edev->pe_config_addr; |
| buid = edev->phb->buid; |
| |
| do { |
| /* extra outputs are LIOBN and dma-addr (hi, lo) */ |
| ret = rtas_call(ddw_avail[1], 5, 4, (u32 *)create, cfg_addr, |
| BUID_HI(buid), BUID_LO(buid), page_shift, window_shift); |
| } while (rtas_busy_delay(ret)); |
| dev_info(&dev->dev, |
| "ibm,create-pe-dma-window(%x) %x %x %x %x %x returned %d " |
| "(liobn = 0x%x starting addr = %x %x)\n", ddw_avail[1], |
| cfg_addr, BUID_HI(buid), BUID_LO(buid), page_shift, |
| window_shift, ret, create->liobn, create->addr_hi, create->addr_lo); |
| |
| return ret; |
| } |
| |
| static void restore_default_window(struct pci_dev *dev, |
| u32 ddw_restore_token) |
| { |
| __restore_default_window(pci_dev_to_eeh_dev(dev), ddw_restore_token); |
| } |
| |
| struct failed_ddw_pdn { |
| struct device_node *pdn; |
| struct list_head list; |
| }; |
| |
| static LIST_HEAD(failed_ddw_pdn_list); |
| |
| /* |
| * If the PE supports dynamic dma windows, and there is space for a table |
| * that can map all pages in a linear offset, then setup such a table, |
| * and record the dma-offset in the struct device. |
| * |
| * dev: the pci device we are checking |
| * pdn: the parent pe node with the ibm,dma_window property |
| * Future: also check if we can remap the base window for our base page size |
| * |
| * returns the dma offset for use by dma_set_mask |
| */ |
| static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn) |
| { |
| int len, ret; |
| struct ddw_query_response query; |
| struct ddw_create_response create; |
| int page_shift; |
| u64 dma_addr, max_addr; |
| struct device_node *dn; |
| const u32 *uninitialized_var(ddw_avail); |
| const u32 *uninitialized_var(ddw_extensions); |
| u32 ddw_restore_token = 0; |
| struct direct_window *window; |
| struct property *win64; |
| struct dynamic_dma_window_prop *ddwprop; |
| const void *dma_window = NULL; |
| unsigned long liobn, offset, size; |
| struct failed_ddw_pdn *fpdn; |
| |
| mutex_lock(&direct_window_init_mutex); |
| |
| dma_addr = find_existing_ddw(pdn); |
| if (dma_addr != 0) |
| goto out_unlock; |
| |
| /* |
| * If we already went through this for a previous function of |
| * the same device and failed, we don't want to muck with the |
| * DMA window again, as it will race with in-flight operations |
| * and can lead to EEHs. The above mutex protects access to the |
| * list. |
| */ |
| list_for_each_entry(fpdn, &failed_ddw_pdn_list, list) { |
| if (!strcmp(fpdn->pdn->full_name, pdn->full_name)) |
| goto out_unlock; |
| } |
| |
| /* |
| * the ibm,ddw-applicable property holds the tokens for: |
| * ibm,query-pe-dma-window |
| * ibm,create-pe-dma-window |
| * ibm,remove-pe-dma-window |
| * for the given node in that order. |
| * the property is actually in the parent, not the PE |
| */ |
| ddw_avail = of_get_property(pdn, "ibm,ddw-applicable", &len); |
| if (!ddw_avail || len < 3 * sizeof(u32)) |
| goto out_unlock; |
| |
| /* |
| * the extensions property is only required to exist in certain |
| * levels of firmware and later |
| * the ibm,ddw-extensions property is a list with the first |
| * element containing the number of extensions and each |
| * subsequent entry is a value corresponding to that extension |
| */ |
| ddw_extensions = of_get_property(pdn, "ibm,ddw-extensions", &len); |
| if (ddw_extensions) { |
| /* |
| * each new defined extension length should be added to |
| * the top of the switch so the "earlier" entries also |
| * get picked up |
| */ |
| switch (ddw_extensions[0]) { |
| /* ibm,reset-pe-dma-windows */ |
| case 1: |
| ddw_restore_token = ddw_extensions[1]; |
| break; |
| } |
| } |
| |
| /* |
| * Only remove the existing DMA window if we can restore back to |
| * the default state. Removing the existing window maximizes the |
| * resources available to firmware for dynamic window creation. |
| */ |
| if (ddw_restore_token) { |
| dma_window = of_get_property(pdn, "ibm,dma-window", NULL); |
| of_parse_dma_window(pdn, dma_window, &liobn, &offset, &size); |
| __remove_ddw(pdn, ddw_avail, liobn); |
| } |
| |
| /* |
| * Query if there is a second window of size to map the |
| * whole partition. Query returns number of windows, largest |
| * block assigned to PE (partition endpoint), and two bitmasks |
| * of page sizes: supported and supported for migrate-dma. |
| */ |
| dn = pci_device_to_OF_node(dev); |
| ret = query_ddw(dev, ddw_avail, &query); |
| if (ret != 0) |
| goto out_restore_window; |
| |
| if (query.windows_available == 0) { |
| /* |
| * no additional windows are available for this device. |
| * We might be able to reallocate the existing window, |
| * trading in for a larger page size. |
| */ |
| dev_dbg(&dev->dev, "no free dynamic windows"); |
| goto out_restore_window; |
| } |
| if (be32_to_cpu(query.page_size) & 4) { |
| page_shift = 24; /* 16MB */ |
| } else if (be32_to_cpu(query.page_size) & 2) { |
| page_shift = 16; /* 64kB */ |
| } else if (be32_to_cpu(query.page_size) & 1) { |
| page_shift = 12; /* 4kB */ |
| } else { |
| dev_dbg(&dev->dev, "no supported direct page size in mask %x", |
| query.page_size); |
| goto out_restore_window; |
| } |
| /* verify the window * number of ptes will map the partition */ |
| /* check largest block * page size > max memory hotplug addr */ |
| max_addr = memory_hotplug_max(); |
| if (be32_to_cpu(query.largest_available_block) < (max_addr >> page_shift)) { |
| dev_dbg(&dev->dev, "can't map partiton max 0x%llx with %u " |
| "%llu-sized pages\n", max_addr, query.largest_available_block, |
| 1ULL << page_shift); |
| goto out_restore_window; |
| } |
| len = order_base_2(max_addr); |
| win64 = kzalloc(sizeof(struct property), GFP_KERNEL); |
| if (!win64) { |
| dev_info(&dev->dev, |
| "couldn't allocate property for 64bit dma window\n"); |
| goto out_restore_window; |
| } |
| win64->name = kstrdup(DIRECT64_PROPNAME, GFP_KERNEL); |
| win64->value = ddwprop = kmalloc(sizeof(*ddwprop), GFP_KERNEL); |
| win64->length = sizeof(*ddwprop); |
| if (!win64->name || !win64->value) { |
| dev_info(&dev->dev, |
| "couldn't allocate property name and value\n"); |
| goto out_free_prop; |
| } |
| |
| ret = create_ddw(dev, ddw_avail, &create, page_shift, len); |
| if (ret != 0) |
| goto out_free_prop; |
| |
| ddwprop->liobn = create.liobn; |
| ddwprop->dma_base = cpu_to_be64(of_read_number(&create.addr_hi, 2)); |
| ddwprop->tce_shift = cpu_to_be32(page_shift); |
| ddwprop->window_shift = cpu_to_be32(len); |
| |
| dev_dbg(&dev->dev, "created tce table LIOBN 0x%x for %s\n", |
| create.liobn, dn->full_name); |
| |
| window = kzalloc(sizeof(*window), GFP_KERNEL); |
| if (!window) |
| goto out_clear_window; |
| |
| ret = walk_system_ram_range(0, memblock_end_of_DRAM() >> PAGE_SHIFT, |
| win64->value, tce_setrange_multi_pSeriesLP_walk); |
| if (ret) { |
| dev_info(&dev->dev, "failed to map direct window for %s: %d\n", |
| dn->full_name, ret); |
| goto out_free_window; |
| } |
| |
| ret = of_add_property(pdn, win64); |
| if (ret) { |
| dev_err(&dev->dev, "unable to add dma window property for %s: %d", |
| pdn->full_name, ret); |
| goto out_free_window; |
| } |
| |
| window->device = pdn; |
| window->prop = ddwprop; |
| spin_lock(&direct_window_list_lock); |
| list_add(&window->list, &direct_window_list); |
| spin_unlock(&direct_window_list_lock); |
| |
| dma_addr = of_read_number(&create.addr_hi, 2); |
| goto out_unlock; |
| |
| out_free_window: |
| kfree(window); |
| |
| out_clear_window: |
| remove_ddw(pdn); |
| |
| out_free_prop: |
| kfree(win64->name); |
| kfree(win64->value); |
| kfree(win64); |
| |
| out_restore_window: |
| if (ddw_restore_token) |
| restore_default_window(dev, ddw_restore_token); |
| |
| fpdn = kzalloc(sizeof(*fpdn), GFP_KERNEL); |
| if (!fpdn) |
| goto out_unlock; |
| fpdn->pdn = pdn; |
| list_add(&fpdn->list, &failed_ddw_pdn_list); |
| |
| out_unlock: |
| mutex_unlock(&direct_window_init_mutex); |
| return dma_addr; |
| } |
| |
| static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev) |
| { |
| struct device_node *pdn, *dn; |
| struct iommu_table *tbl; |
| const __be32 *dma_window = NULL; |
| struct pci_dn *pci; |
| |
| pr_debug("pci_dma_dev_setup_pSeriesLP: %s\n", pci_name(dev)); |
| |
| /* dev setup for LPAR is a little tricky, since the device tree might |
| * contain the dma-window properties per-device and not necessarily |
| * for the bus. So we need to search upwards in the tree until we |
| * either hit a dma-window property, OR find a parent with a table |
| * already allocated. |
| */ |
| dn = pci_device_to_OF_node(dev); |
| pr_debug(" node is %s\n", dn->full_name); |
| |
| for (pdn = dn; pdn && PCI_DN(pdn) && !PCI_DN(pdn)->iommu_table; |
| pdn = pdn->parent) { |
| dma_window = of_get_property(pdn, "ibm,dma-window", NULL); |
| if (dma_window) |
| break; |
| } |
| |
| if (!pdn || !PCI_DN(pdn)) { |
| printk(KERN_WARNING "pci_dma_dev_setup_pSeriesLP: " |
| "no DMA window found for pci dev=%s dn=%s\n", |
| pci_name(dev), of_node_full_name(dn)); |
| return; |
| } |
| pr_debug(" parent is %s\n", pdn->full_name); |
| |
| pci = PCI_DN(pdn); |
| if (!pci->iommu_table) { |
| tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL, |
| pci->phb->node); |
| iommu_table_setparms_lpar(pci->phb, pdn, tbl, dma_window); |
| pci->iommu_table = iommu_init_table(tbl, pci->phb->node); |
| iommu_register_group(tbl, pci_domain_nr(pci->phb->bus), 0); |
| pr_debug(" created table: %p\n", pci->iommu_table); |
| } else { |
| pr_debug(" found DMA window, table: %p\n", pci->iommu_table); |
| } |
| |
| set_iommu_table_base(&dev->dev, pci->iommu_table); |
| } |
| |
| static int dma_set_mask_pSeriesLP(struct device *dev, u64 dma_mask) |
| { |
| bool ddw_enabled = false; |
| struct device_node *pdn, *dn; |
| struct pci_dev *pdev; |
| const __be32 *dma_window = NULL; |
| u64 dma_offset; |
| |
| if (!dev->dma_mask) |
| return -EIO; |
| |
| if (!dev_is_pci(dev)) |
| goto check_mask; |
| |
| pdev = to_pci_dev(dev); |
| |
| /* only attempt to use a new window if 64-bit DMA is requested */ |
| if (!disable_ddw && dma_mask == DMA_BIT_MASK(64)) { |
| dn = pci_device_to_OF_node(pdev); |
| dev_dbg(dev, "node is %s\n", dn->full_name); |
| |
| /* |
| * the device tree might contain the dma-window properties |
| * per-device and not necessarily for the bus. So we need to |
| * search upwards in the tree until we either hit a dma-window |
| * property, OR find a parent with a table already allocated. |
| */ |
| for (pdn = dn; pdn && PCI_DN(pdn) && !PCI_DN(pdn)->iommu_table; |
| pdn = pdn->parent) { |
| dma_window = of_get_property(pdn, "ibm,dma-window", NULL); |
| if (dma_window) |
| break; |
| } |
| if (pdn && PCI_DN(pdn)) { |
| dma_offset = enable_ddw(pdev, pdn); |
| if (dma_offset != 0) { |
| dev_info(dev, "Using 64-bit direct DMA at offset %llx\n", dma_offset); |
| set_dma_offset(dev, dma_offset); |
| set_dma_ops(dev, &dma_direct_ops); |
| ddw_enabled = true; |
| } |
| } |
| } |
| |
| /* fall back on iommu ops, restore table pointer with ops */ |
| if (!ddw_enabled && get_dma_ops(dev) != &dma_iommu_ops) { |
| dev_info(dev, "Restoring 32-bit DMA via iommu\n"); |
| set_dma_ops(dev, &dma_iommu_ops); |
| pci_dma_dev_setup_pSeriesLP(pdev); |
| } |
| |
| check_mask: |
| if (!dma_supported(dev, dma_mask)) |
| return -EIO; |
| |
| *dev->dma_mask = dma_mask; |
| return 0; |
| } |
| |
| static u64 dma_get_required_mask_pSeriesLP(struct device *dev) |
| { |
| if (!dev->dma_mask) |
| return 0; |
| |
| if (!disable_ddw && dev_is_pci(dev)) { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct device_node *dn; |
| |
| dn = pci_device_to_OF_node(pdev); |
| |
| /* search upwards for ibm,dma-window */ |
| for (; dn && PCI_DN(dn) && !PCI_DN(dn)->iommu_table; |
| dn = dn->parent) |
| if (of_get_property(dn, "ibm,dma-window", NULL)) |
| break; |
| /* if there is a ibm,ddw-applicable property require 64 bits */ |
| if (dn && PCI_DN(dn) && |
| of_get_property(dn, "ibm,ddw-applicable", NULL)) |
| return DMA_BIT_MASK(64); |
| } |
| |
| return dma_iommu_ops.get_required_mask(dev); |
| } |
| |
| #else /* CONFIG_PCI */ |
| #define pci_dma_bus_setup_pSeries NULL |
| #define pci_dma_dev_setup_pSeries NULL |
| #define pci_dma_bus_setup_pSeriesLP NULL |
| #define pci_dma_dev_setup_pSeriesLP NULL |
| #define dma_set_mask_pSeriesLP NULL |
| #define dma_get_required_mask_pSeriesLP NULL |
| #endif /* !CONFIG_PCI */ |
| |
| static int iommu_mem_notifier(struct notifier_block *nb, unsigned long action, |
| void *data) |
| { |
| struct direct_window *window; |
| struct memory_notify *arg = data; |
| int ret = 0; |
| |
| switch (action) { |
| case MEM_GOING_ONLINE: |
| spin_lock(&direct_window_list_lock); |
| list_for_each_entry(window, &direct_window_list, list) { |
| ret |= tce_setrange_multi_pSeriesLP(arg->start_pfn, |
| arg->nr_pages, window->prop); |
| /* XXX log error */ |
| } |
| spin_unlock(&direct_window_list_lock); |
| break; |
| case MEM_CANCEL_ONLINE: |
| case MEM_OFFLINE: |
| spin_lock(&direct_window_list_lock); |
| list_for_each_entry(window, &direct_window_list, list) { |
| ret |= tce_clearrange_multi_pSeriesLP(arg->start_pfn, |
| arg->nr_pages, window->prop); |
| /* XXX log error */ |
| } |
| spin_unlock(&direct_window_list_lock); |
| break; |
| default: |
| break; |
| } |
| if (ret && action != MEM_CANCEL_ONLINE) |
| return NOTIFY_BAD; |
| |
| return NOTIFY_OK; |
| } |
| |
| static struct notifier_block iommu_mem_nb = { |
| .notifier_call = iommu_mem_notifier, |
| }; |
| |
| static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node) |
| { |
| int err = NOTIFY_OK; |
| struct device_node *np = node; |
| struct pci_dn *pci = PCI_DN(np); |
| struct direct_window *window; |
| |
| switch (action) { |
| case OF_RECONFIG_DETACH_NODE: |
| remove_ddw(np); |
| if (pci && pci->iommu_table) |
| iommu_free_table(pci->iommu_table, np->full_name); |
| |
| spin_lock(&direct_window_list_lock); |
| list_for_each_entry(window, &direct_window_list, list) { |
| if (window->device == np) { |
| list_del(&window->list); |
| kfree(window); |
| break; |
| } |
| } |
| spin_unlock(&direct_window_list_lock); |
| break; |
| default: |
| err = NOTIFY_DONE; |
| break; |
| } |
| return err; |
| } |
| |
| static struct notifier_block iommu_reconfig_nb = { |
| .notifier_call = iommu_reconfig_notifier, |
| }; |
| |
| /* These are called very early. */ |
| void iommu_init_early_pSeries(void) |
| { |
| if (of_chosen && of_get_property(of_chosen, "linux,iommu-off", NULL)) |
| return; |
| |
| if (firmware_has_feature(FW_FEATURE_LPAR)) { |
| if (firmware_has_feature(FW_FEATURE_MULTITCE)) { |
| ppc_md.tce_build = tce_buildmulti_pSeriesLP; |
| ppc_md.tce_free = tce_freemulti_pSeriesLP; |
| } else { |
| ppc_md.tce_build = tce_build_pSeriesLP; |
| ppc_md.tce_free = tce_free_pSeriesLP; |
| } |
| ppc_md.tce_get = tce_get_pSeriesLP; |
| ppc_md.pci_dma_bus_setup = pci_dma_bus_setup_pSeriesLP; |
| ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_pSeriesLP; |
| ppc_md.dma_set_mask = dma_set_mask_pSeriesLP; |
| ppc_md.dma_get_required_mask = dma_get_required_mask_pSeriesLP; |
| } else { |
| ppc_md.tce_build = tce_build_pSeries; |
| ppc_md.tce_free = tce_free_pSeries; |
| ppc_md.tce_get = tce_get_pseries; |
| ppc_md.pci_dma_bus_setup = pci_dma_bus_setup_pSeries; |
| ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_pSeries; |
| } |
| |
| |
| of_reconfig_notifier_register(&iommu_reconfig_nb); |
| register_memory_notifier(&iommu_mem_nb); |
| |
| set_pci_dma_ops(&dma_iommu_ops); |
| } |
| |
| static int __init disable_multitce(char *str) |
| { |
| if (strcmp(str, "off") == 0 && |
| firmware_has_feature(FW_FEATURE_LPAR) && |
| firmware_has_feature(FW_FEATURE_MULTITCE)) { |
| printk(KERN_INFO "Disabling MULTITCE firmware feature\n"); |
| ppc_md.tce_build = tce_build_pSeriesLP; |
| ppc_md.tce_free = tce_free_pSeriesLP; |
| powerpc_firmware_features &= ~FW_FEATURE_MULTITCE; |
| } |
| return 1; |
| } |
| |
| __setup("multitce=", disable_multitce); |