ARM: mach-shmobile: r8a7779: Minimal setup using DT
Allow a minimal setup of the r8a7779 SoC using a flattened device tree.
In particular, configure the i2c and ethernet controllers using a
flattened device tree.
SCI serial controller and TMU clock source, whose drivers do not yet
support configuration using a flattened device tree, are still configured
using C code in order to allow booting of a board with this SoC.
The ethernet controller also requires a regulator which is a board property.
A sample snippet DT for the marzen board is as follows:
/dts-v1/;
/include/ "r8a7779.dtsi"
/ {
fixedregulator3v3: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
};
&lan0 {
vddvario-supply = <&fixedregulator3v3>;
vdd33a-supply = <&fixedregulator3v3>;
};
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 8c6d52c..2913759 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -47,4 +47,49 @@
reg = <0xf0001000 0x1000>,
<0xf0000100 0x100>;
};
+
+ i2c0: i2c@0xffc70000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0xffc70000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 79 0x4>;
+ };
+
+ i2c1: i2c@0xffc71000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0xffc71000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 82 0x4>;
+ };
+
+ i2c2: i2c@0xffc72000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0xffc72000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 80 0x4>;
+ };
+
+ i2c3: i2c@0xffc73000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0xffc73000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 81 0x4>;
+ };
+
+ lan0: lan0@18000000 {
+ compatible = "smsc,lan9220", "smsc,lan9115";
+ reg = <0x18000000 0x100>;
+ phy-mode = "mii";
+ interrupt-parent = <&gic>;
+ interrupts = <0 28 0x4>;
+ reg-io-width = <4>;
+ };
};
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index 3f06710..c72d301 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -63,7 +63,9 @@
extern void r8a7779_map_io(void);
extern void r8a7779_earlytimer_init(void);
extern void r8a7779_add_early_devices(void);
+extern void r8a7779_add_early_devices_dt(void);
extern void r8a7779_add_standard_devices(void);
+extern void r8a7779_add_standard_devices_dt(void);
extern void r8a7779_clock_init(void);
extern void r8a7779_pinmux_init(void);
extern void r8a7779_pm_init(void);
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index c54ff9b..922dd4d 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -21,6 +21,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/input.h>
@@ -321,7 +322,7 @@
.num_resources = ARRAY_SIZE(rcar_i2c3_res),
};
-static struct platform_device *r8a7779_early_devices[] __initdata = {
+static struct platform_device *r8a7779_early_devices_dt[] __initdata = {
&scif0_device,
&scif1_device,
&scif2_device,
@@ -330,15 +331,15 @@
&scif5_device,
&tmu00_device,
&tmu01_device,
+};
+
+static struct platform_device *r8a7779_early_devices[] __initdata = {
&i2c0_device,
&i2c1_device,
&i2c2_device,
&i2c3_device,
};
-static struct platform_device *r8a7779_late_devices[] __initdata = {
-};
-
void __init r8a7779_add_standard_devices(void)
{
#ifdef CONFIG_CACHE_L2X0
@@ -349,10 +350,10 @@
r8a7779_init_pm_domains();
+ platform_add_devices(r8a7779_early_devices_dt,
+ ARRAY_SIZE(r8a7779_early_devices_dt));
platform_add_devices(r8a7779_early_devices,
ARRAY_SIZE(r8a7779_early_devices));
- platform_add_devices(r8a7779_late_devices,
- ARRAY_SIZE(r8a7779_late_devices));
}
/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
@@ -367,6 +368,8 @@
void __init r8a7779_add_early_devices(void)
{
+ early_platform_add_devices(r8a7779_early_devices_dt,
+ ARRAY_SIZE(r8a7779_early_devices_dt));
early_platform_add_devices(r8a7779_early_devices,
ARRAY_SIZE(r8a7779_early_devices));
@@ -386,3 +389,47 @@
* command line in case of the marzen board.
*/
}
+
+#ifdef CONFIG_USE_OF
+void __init r8a7779_add_early_devices_dt(void)
+{
+ shmobile_setup_delay(1000, 2, 4); /* Cortex-A9 @ 1000MHz */
+
+ early_platform_add_devices(r8a7779_early_devices_dt,
+ ARRAY_SIZE(r8a7779_early_devices_dt));
+
+ /* Early serial console setup is not included here.
+ * See comment in r8a7779_add_early_devices().
+ */
+}
+
+static const struct of_dev_auxdata r8a7779_auxdata_lookup[] __initconst = {
+ {},
+};
+
+void __init r8a7779_add_standard_devices_dt(void)
+{
+ /* clocks are setup late during boot in the case of DT */
+ r8a7779_clock_init();
+
+ platform_add_devices(r8a7779_early_devices_dt,
+ ARRAY_SIZE(r8a7779_early_devices_dt));
+ of_platform_populate(NULL, of_default_bus_match_table,
+ r8a7779_auxdata_lookup, NULL);
+}
+
+static const char *r8a7779_compat_dt[] __initdata = {
+ "renesas,r8a7779",
+ NULL,
+};
+
+DT_MACHINE_START(SH73A0_DT, "Generic R8A7779 (Flattened Device Tree)")
+ .map_io = r8a7779_map_io,
+ .init_early = r8a7779_add_early_devices_dt,
+ .nr_irqs = NR_IRQS_LEGACY,
+ .init_irq = r8a7779_init_irq_dt,
+ .init_machine = r8a7779_add_standard_devices_dt,
+ .init_time = shmobile_timer_init,
+ .dt_compat = r8a7779_compat_dt,
+MACHINE_END
+#endif /* CONFIG_USE_OF */