Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "i915, tda998x and vmwgfx fixes,

  The main one is i915 fix for missing VGA connectors, along with some
  fixes for the tda998x from Russell fixing some modesetting problems.

  (still on holidays, but got a spare moment to find these)"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/vmwgfx: Fix incorrect write to read-only register v2:
  drm/i915: Drop early VLV WA to fix Voltage not getting dropped to Vmin
  drm/i915: only apply crt_present check on VLV
  drm/i915: Wait for vblank after enabling the primary plane on BDW
  drm/i2c: tda998x: add some basic mode validation
  drm/i2c: tda998x: faster polling for edid
  drm/i2c: tda998x: move drm_i2c_encoder_destroy call
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index 240c331..ac357b0 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -810,6 +810,12 @@
 tda998x_encoder_mode_valid(struct drm_encoder *encoder,
 			  struct drm_display_mode *mode)
 {
+	if (mode->clock > 150000)
+		return MODE_CLOCK_HIGH;
+	if (mode->htotal >= BIT(13))
+		return MODE_BAD_HVALUE;
+	if (mode->vtotal >= BIT(11))
+		return MODE_BAD_VVALUE;
 	return MODE_OK;
 }
 
@@ -1048,8 +1054,8 @@
 			return i;
 		}
 	} else {
-		for (i = 10; i > 0; i--) {
-			msleep(10);
+		for (i = 100; i > 0; i--) {
+			msleep(1);
 			ret = reg_read(priv, REG_INT_FLAGS_2);
 			if (ret < 0)
 				return ret;
@@ -1183,7 +1189,6 @@
 tda998x_encoder_destroy(struct drm_encoder *encoder)
 {
 	struct tda998x_priv *priv = to_tda998x_priv(encoder);
-	drm_i2c_encoder_destroy(encoder);
 
 	/* disable all IRQs and free the IRQ handler */
 	cec_write(priv, REG_CEC_RXSHPDINTENA, 0);
@@ -1193,6 +1198,7 @@
 
 	if (priv->cec)
 		i2c_unregister_device(priv->cec);
+	drm_i2c_encoder_destroy(encoder);
 	kfree(priv);
 }
 
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 5f285fb..556c916 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2087,6 +2087,7 @@
 static void intel_enable_primary_hw_plane(struct drm_i915_private *dev_priv,
 					  enum plane plane, enum pipe pipe)
 {
+	struct drm_device *dev = dev_priv->dev;
 	struct intel_crtc *intel_crtc =
 		to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
 	int reg;
@@ -2106,6 +2107,14 @@
 
 	I915_WRITE(reg, val | DISPLAY_PLANE_ENABLE);
 	intel_flush_primary_plane(dev_priv, plane);
+
+	/*
+	 * BDW signals flip done immediately if the plane
+	 * is disabled, even if the plane enable is already
+	 * armed to occur at the next vblank :(
+	 */
+	if (IS_BROADWELL(dev))
+		intel_wait_for_vblank(dev, intel_crtc->pipe);
 }
 
 /**
@@ -11088,6 +11097,22 @@
 	return names[output];
 }
 
+static bool intel_crt_present(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (IS_ULT(dev))
+		return false;
+
+	if (IS_CHERRYVIEW(dev))
+		return false;
+
+	if (IS_VALLEYVIEW(dev) && !dev_priv->vbt.int_crt_support)
+		return false;
+
+	return true;
+}
+
 static void intel_setup_outputs(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -11096,7 +11121,7 @@
 
 	intel_lvds_init(dev);
 
-	if (!IS_ULT(dev) && !IS_CHERRYVIEW(dev) && dev_priv->vbt.int_crt_support)
+	if (intel_crt_present(dev))
 		intel_crt_init(dev);
 
 	if (HAS_DDI(dev)) {
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 61cb90e..ee728070 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3209,6 +3209,14 @@
 */
 static void vlv_set_rps_idle(struct drm_i915_private *dev_priv)
 {
+	struct drm_device *dev = dev_priv->dev;
+
+	/* Latest VLV doesn't need to force the gfx clock */
+	if (dev->pdev->revision >= 0xd) {
+		valleyview_set_rps(dev_priv->dev, dev_priv->rps.min_freq_softlimit);
+		return;
+	}
+
 	/*
 	 * When we are idle.  Drop to min voltage state.
 	 */
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 1b66ddc..9a17b4e 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -691,6 +691,14 @@
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 
 	/*
+	 * BDW signals flip done immediately if the plane
+	 * is disabled, even if the plane enable is already
+	 * armed to occur at the next vblank :(
+	 */
+	if (IS_BROADWELL(dev))
+		intel_wait_for_vblank(dev, intel_crtc->pipe);
+
+	/*
 	 * FIXME IPS should be fine as long as one plane is
 	 * enabled, but in practice it seems to have problems
 	 * when going from primary only to sprite only and vice
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
index a89ad93..b031b48 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
@@ -179,7 +179,6 @@
 		vmw_write(vmw_priv, SVGA_REG_DISPLAY_POSITION_Y, info->var.yoffset);
 		vmw_write(vmw_priv, SVGA_REG_DISPLAY_WIDTH, info->var.xres);
 		vmw_write(vmw_priv, SVGA_REG_DISPLAY_HEIGHT, info->var.yres);
-		vmw_write(vmw_priv, SVGA_REG_BYTES_PER_LINE, info->fix.line_length);
 		vmw_write(vmw_priv, SVGA_REG_DISPLAY_ID, SVGA_ID_INVALID);
 	}