[SCSI] bfa: Brocade-1860 Fabric Adapter Hardware Enablement
- Added support for Brocade-1860 Fabric Adapter.
- Made changes to support single firmware image per asic type.
- Combined bfi_cbreg.h and bfi_ctreg.h defines into bfi_reg.h with
only minimal defines used by host.
- Added changes to setup CPE/RME Queue register offsets based on
firmware response.
- Removed queue register offset initializations and added register offsets
to BFI config response message.
- Added Brocade-1860 asic specific interrupt status definitions and
mailbox interfaces.
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c
index 59b5e9b..8ddae0d 100644
--- a/drivers/scsi/bfa/bfad.c
+++ b/drivers/scsi/bfa/bfad.c
@@ -58,12 +58,12 @@
int msix_disable_cb = 0, msix_disable_ct = 0;
/* Firmware releated */
-u32 bfi_image_ct_fc_size, bfi_image_ct_cna_size, bfi_image_cb_fc_size;
-u32 *bfi_image_ct_fc, *bfi_image_ct_cna, *bfi_image_cb_fc;
+u32 bfi_image_cb_size, bfi_image_ct_size, bfi_image_ct2_size;
+u32 *bfi_image_cb, *bfi_image_ct, *bfi_image_ct2;
-#define BFAD_FW_FILE_CT_FC "ctfw_fc.bin"
-#define BFAD_FW_FILE_CT_CNA "ctfw_cna.bin"
-#define BFAD_FW_FILE_CB_FC "cbfw_fc.bin"
+#define BFAD_FW_FILE_CB "cbfw.bin"
+#define BFAD_FW_FILE_CT "ctfw.bin"
+#define BFAD_FW_FILE_CT2 "ct2fw.bin"
static u32 *bfad_load_fwimg(struct pci_dev *pdev);
static void bfad_free_fwimg(void);
@@ -71,18 +71,18 @@
u32 *bfi_image_size, char *fw_name);
static const char *msix_name_ct[] = {
+ "ctrl",
"cpe0", "cpe1", "cpe2", "cpe3",
- "rme0", "rme1", "rme2", "rme3",
- "ctrl" };
+ "rme0", "rme1", "rme2", "rme3" };
static const char *msix_name_cb[] = {
"cpe0", "cpe1", "cpe2", "cpe3",
"rme0", "rme1", "rme2", "rme3",
"eemc", "elpu0", "elpu1", "epss", "mlpu" };
-MODULE_FIRMWARE(BFAD_FW_FILE_CT_FC);
-MODULE_FIRMWARE(BFAD_FW_FILE_CT_CNA);
-MODULE_FIRMWARE(BFAD_FW_FILE_CB_FC);
+MODULE_FIRMWARE(BFAD_FW_FILE_CB);
+MODULE_FIRMWARE(BFAD_FW_FILE_CT);
+MODULE_FIRMWARE(BFAD_FW_FILE_CT2);
module_param(os_name, charp, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(os_name, "OS name of the hba host machine");
@@ -787,6 +787,7 @@
}
bfad->pci_bar0_kva = pci_iomap(pdev, 0, pci_resource_len(pdev, 0));
+ bfad->pci_bar2_kva = pci_iomap(pdev, 2, pci_resource_len(pdev, 2));
if (bfad->pci_bar0_kva == NULL) {
printk(KERN_ERR "Fail to map bar0\n");
@@ -868,6 +869,7 @@
bfad_pci_uninit(struct pci_dev *pdev, struct bfad_s *bfad)
{
pci_iounmap(pdev, bfad->pci_bar0_kva);
+ pci_iounmap(pdev, bfad->pci_bar2_kva);
pci_release_regions(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
@@ -1233,8 +1235,8 @@
for (i = 0; i < bfad->nvec; i++) {
sprintf(bfad->msix_tab[i].name, "bfa-%s-%s",
bfad->pci_name,
- ((bfa_asic_id_ct(bfad->hal_pcidev.device_id)) ?
- msix_name_ct[i] : msix_name_cb[i]));
+ ((bfa_asic_id_cb(bfad->hal_pcidev.device_id)) ?
+ msix_name_cb[i] : msix_name_ct[i]));
error = request_irq(bfad->msix_tab[i].msix.vector,
(irq_handler_t) bfad_msix, 0,
@@ -1272,8 +1274,8 @@
/* Set up the msix entry table */
bfad_init_msix_entry(bfad, msix_entries, mask, max_bit);
- if ((bfa_asic_id_ct(pdev->device) && !msix_disable_ct) ||
- (!bfa_asic_id_ct(pdev->device) && !msix_disable_cb)) {
+ if ((bfa_asic_id_ctc(pdev->device) && !msix_disable_ct) ||
+ (bfa_asic_id_cb(pdev->device) && !msix_disable_cb)) {
error = pci_enable_msix(bfad->pcidev, msix_entries, bfad->nvec);
if (error) {
@@ -1346,7 +1348,8 @@
int error = -ENODEV, retval;
/* For single port cards - only claim function 0 */
- if ((pdev->device == BFA_PCI_DEVICE_ID_FC_8G1P) &&
+ if ((pdev->device == BFA_PCI_DEVICE_ID_FC_8G1P ||
+ pdev->device == BFA_PCI_DEVICE_ID_CT2) &&
(PCI_FUNC(pdev->devfn) != 0))
return -ENODEV;
@@ -1501,6 +1504,14 @@
.class = (PCI_CLASS_SERIAL_FIBER << 8),
.class_mask = ~0,
},
+ {
+ .vendor = BFA_PCI_VENDOR_ID_BROCADE,
+ .device = BFA_PCI_DEVICE_ID_CT2,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .class = (PCI_CLASS_SERIAL_FIBER << 8),
+ .class_mask = ~0,
+ },
{0, 0},
};
@@ -1594,33 +1605,33 @@
static u32 *
bfad_load_fwimg(struct pci_dev *pdev)
{
- if (pdev->device == BFA_PCI_DEVICE_ID_CT_FC) {
- if (bfi_image_ct_fc_size == 0)
- bfad_read_firmware(pdev, &bfi_image_ct_fc,
- &bfi_image_ct_fc_size, BFAD_FW_FILE_CT_FC);
- return bfi_image_ct_fc;
- } else if (pdev->device == BFA_PCI_DEVICE_ID_CT) {
- if (bfi_image_ct_cna_size == 0)
- bfad_read_firmware(pdev, &bfi_image_ct_cna,
- &bfi_image_ct_cna_size, BFAD_FW_FILE_CT_CNA);
- return bfi_image_ct_cna;
+ if (pdev->device == BFA_PCI_DEVICE_ID_CT2) {
+ if (bfi_image_ct2_size == 0)
+ bfad_read_firmware(pdev, &bfi_image_ct2,
+ &bfi_image_ct2_size, BFAD_FW_FILE_CT2);
+ return bfi_image_ct2;
+ } else if (bfa_asic_id_ct(pdev->device)) {
+ if (bfi_image_ct_size == 0)
+ bfad_read_firmware(pdev, &bfi_image_ct,
+ &bfi_image_ct_size, BFAD_FW_FILE_CT);
+ return bfi_image_ct;
} else {
- if (bfi_image_cb_fc_size == 0)
- bfad_read_firmware(pdev, &bfi_image_cb_fc,
- &bfi_image_cb_fc_size, BFAD_FW_FILE_CB_FC);
- return bfi_image_cb_fc;
+ if (bfi_image_cb_size == 0)
+ bfad_read_firmware(pdev, &bfi_image_cb,
+ &bfi_image_cb_size, BFAD_FW_FILE_CB);
+ return bfi_image_cb;
}
}
static void
bfad_free_fwimg(void)
{
- if (bfi_image_ct_fc_size && bfi_image_ct_fc)
- vfree(bfi_image_ct_fc);
- if (bfi_image_ct_cna_size && bfi_image_ct_cna)
- vfree(bfi_image_ct_cna);
- if (bfi_image_cb_fc_size && bfi_image_cb_fc)
- vfree(bfi_image_cb_fc);
+ if (bfi_image_ct2_size && bfi_image_ct2)
+ vfree(bfi_image_ct2);
+ if (bfi_image_ct_size && bfi_image_ct)
+ vfree(bfi_image_ct);
+ if (bfi_image_cb_size && bfi_image_cb)
+ vfree(bfi_image_cb);
}
module_init(bfad_init);