| /* |
| * Freescale MXS LRADC ADC driver |
| * |
| * Copyright (c) 2012 DENX Software Engineering, GmbH. |
| * Copyright (c) 2017 Ksenija Stanojevic <ksenija.stanojevic@gmail.com> |
| * |
| * Authors: |
| * Marek Vasut <marex@denx.de> |
| * Ksenija Stanojevic <ksenija.stanojevic@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/completion.h> |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/interrupt.h> |
| #include <linux/mfd/core.h> |
| #include <linux/mfd/mxs-lradc.h> |
| #include <linux/module.h> |
| #include <linux/of_irq.h> |
| #include <linux/platform_device.h> |
| #include <linux/sysfs.h> |
| |
| #include <linux/iio/buffer.h> |
| #include <linux/iio/iio.h> |
| #include <linux/iio/trigger.h> |
| #include <linux/iio/trigger_consumer.h> |
| #include <linux/iio/triggered_buffer.h> |
| #include <linux/iio/sysfs.h> |
| |
| /* |
| * Make this runtime configurable if necessary. Currently, if the buffered mode |
| * is enabled, the LRADC takes LRADC_DELAY_TIMER_LOOP samples of data before |
| * triggering IRQ. The sampling happens every (LRADC_DELAY_TIMER_PER / 2000) |
| * seconds. The result is that the samples arrive every 500mS. |
| */ |
| #define LRADC_DELAY_TIMER_PER 200 |
| #define LRADC_DELAY_TIMER_LOOP 5 |
| |
| #define VREF_MV_BASE 1850 |
| |
| const char *mx23_lradc_adc_irq_names[] = { |
| "mxs-lradc-channel0", |
| "mxs-lradc-channel1", |
| "mxs-lradc-channel2", |
| "mxs-lradc-channel3", |
| "mxs-lradc-channel4", |
| "mxs-lradc-channel5", |
| }; |
| |
| const char *mx28_lradc_adc_irq_names[] = { |
| "mxs-lradc-thresh0", |
| "mxs-lradc-thresh1", |
| "mxs-lradc-channel0", |
| "mxs-lradc-channel1", |
| "mxs-lradc-channel2", |
| "mxs-lradc-channel3", |
| "mxs-lradc-channel4", |
| "mxs-lradc-channel5", |
| "mxs-lradc-button0", |
| "mxs-lradc-button1", |
| }; |
| |
| static const u32 mxs_lradc_adc_vref_mv[][LRADC_MAX_TOTAL_CHANS] = { |
| [IMX23_LRADC] = { |
| VREF_MV_BASE, /* CH0 */ |
| VREF_MV_BASE, /* CH1 */ |
| VREF_MV_BASE, /* CH2 */ |
| VREF_MV_BASE, /* CH3 */ |
| VREF_MV_BASE, /* CH4 */ |
| VREF_MV_BASE, /* CH5 */ |
| VREF_MV_BASE * 2, /* CH6 VDDIO */ |
| VREF_MV_BASE * 4, /* CH7 VBATT */ |
| VREF_MV_BASE, /* CH8 Temp sense 0 */ |
| VREF_MV_BASE, /* CH9 Temp sense 1 */ |
| VREF_MV_BASE, /* CH10 */ |
| VREF_MV_BASE, /* CH11 */ |
| VREF_MV_BASE, /* CH12 USB_DP */ |
| VREF_MV_BASE, /* CH13 USB_DN */ |
| VREF_MV_BASE, /* CH14 VBG */ |
| VREF_MV_BASE * 4, /* CH15 VDD5V */ |
| }, |
| [IMX28_LRADC] = { |
| VREF_MV_BASE, /* CH0 */ |
| VREF_MV_BASE, /* CH1 */ |
| VREF_MV_BASE, /* CH2 */ |
| VREF_MV_BASE, /* CH3 */ |
| VREF_MV_BASE, /* CH4 */ |
| VREF_MV_BASE, /* CH5 */ |
| VREF_MV_BASE, /* CH6 */ |
| VREF_MV_BASE * 4, /* CH7 VBATT */ |
| VREF_MV_BASE, /* CH8 Temp sense 0 */ |
| VREF_MV_BASE, /* CH9 Temp sense 1 */ |
| VREF_MV_BASE * 2, /* CH10 VDDIO */ |
| VREF_MV_BASE, /* CH11 VTH */ |
| VREF_MV_BASE * 2, /* CH12 VDDA */ |
| VREF_MV_BASE, /* CH13 VDDD */ |
| VREF_MV_BASE, /* CH14 VBG */ |
| VREF_MV_BASE * 4, /* CH15 VDD5V */ |
| }, |
| }; |
| |
| enum mxs_lradc_divbytwo { |
| MXS_LRADC_DIV_DISABLED = 0, |
| MXS_LRADC_DIV_ENABLED, |
| }; |
| |
| struct mxs_lradc_scale { |
| unsigned int integer; |
| unsigned int nano; |
| }; |
| |
| struct mxs_lradc_adc { |
| struct mxs_lradc *lradc; |
| struct device *dev; |
| |
| void __iomem *base; |
| u32 buffer[10]; |
| struct iio_trigger *trig; |
| struct completion completion; |
| spinlock_t lock; |
| |
| const u32 *vref_mv; |
| struct mxs_lradc_scale scale_avail[LRADC_MAX_TOTAL_CHANS][2]; |
| unsigned long is_divided; |
| }; |
| |
| |
| /* Raw I/O operations */ |
| static int mxs_lradc_adc_read_single(struct iio_dev *iio_dev, int chan, |
| int *val) |
| { |
| struct mxs_lradc_adc *adc = iio_priv(iio_dev); |
| struct mxs_lradc *lradc = adc->lradc; |
| int ret; |
| |
| /* |
| * See if there is no buffered operation in progress. If there is simply |
| * bail out. This can be improved to support both buffered and raw IO at |
| * the same time, yet the code becomes horribly complicated. Therefore I |
| * applied KISS principle here. |
| */ |
| ret = iio_device_claim_direct_mode(iio_dev); |
| if (ret) |
| return ret; |
| |
| reinit_completion(&adc->completion); |
| |
| /* |
| * No buffered operation in progress, map the channel and trigger it. |
| * Virtual channel 0 is always used here as the others are always not |
| * used if doing raw sampling. |
| */ |
| if (lradc->soc == IMX28_LRADC) |
| writel(LRADC_CTRL1_LRADC_IRQ_EN(0), |
| adc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR); |
| writel(0x1, adc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR); |
| |
| /* Enable / disable the divider per requirement */ |
| if (test_bit(chan, &adc->is_divided)) |
| writel(1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET, |
| adc->base + LRADC_CTRL2 + STMP_OFFSET_REG_SET); |
| else |
| writel(1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET, |
| adc->base + LRADC_CTRL2 + STMP_OFFSET_REG_CLR); |
| |
| /* Clean the slot's previous content, then set new one. */ |
| writel(LRADC_CTRL4_LRADCSELECT_MASK(0), |
| adc->base + LRADC_CTRL4 + STMP_OFFSET_REG_CLR); |
| writel(chan, adc->base + LRADC_CTRL4 + STMP_OFFSET_REG_SET); |
| |
| writel(0, adc->base + LRADC_CH(0)); |
| |
| /* Enable the IRQ and start sampling the channel. */ |
| writel(LRADC_CTRL1_LRADC_IRQ_EN(0), |
| adc->base + LRADC_CTRL1 + STMP_OFFSET_REG_SET); |
| writel(BIT(0), adc->base + LRADC_CTRL0 + STMP_OFFSET_REG_SET); |
| |
| /* Wait for completion on the channel, 1 second max. */ |
| ret = wait_for_completion_killable_timeout(&adc->completion, HZ); |
| if (!ret) |
| ret = -ETIMEDOUT; |
| if (ret < 0) |
| goto err; |
| |
| /* Read the data. */ |
| *val = readl(adc->base + LRADC_CH(0)) & LRADC_CH_VALUE_MASK; |
| ret = IIO_VAL_INT; |
| |
| err: |
| writel(LRADC_CTRL1_LRADC_IRQ_EN(0), |
| adc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR); |
| |
| iio_device_release_direct_mode(iio_dev); |
| |
| return ret; |
| } |
| |
| static int mxs_lradc_adc_read_temp(struct iio_dev *iio_dev, int *val) |
| { |
| int ret, min, max; |
| |
| ret = mxs_lradc_adc_read_single(iio_dev, 8, &min); |
| if (ret != IIO_VAL_INT) |
| return ret; |
| |
| ret = mxs_lradc_adc_read_single(iio_dev, 9, &max); |
| if (ret != IIO_VAL_INT) |
| return ret; |
| |
| *val = max - min; |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int mxs_lradc_adc_read_raw(struct iio_dev *iio_dev, |
| const struct iio_chan_spec *chan, |
| int *val, int *val2, long m) |
| { |
| struct mxs_lradc_adc *adc = iio_priv(iio_dev); |
| |
| switch (m) { |
| case IIO_CHAN_INFO_RAW: |
| if (chan->type == IIO_TEMP) |
| return mxs_lradc_adc_read_temp(iio_dev, val); |
| |
| return mxs_lradc_adc_read_single(iio_dev, chan->channel, val); |
| |
| case IIO_CHAN_INFO_SCALE: |
| if (chan->type == IIO_TEMP) { |
| /* |
| * From the datasheet, we have to multiply by 1.012 and |
| * divide by 4 |
| */ |
| *val = 0; |
| *val2 = 253000; |
| return IIO_VAL_INT_PLUS_MICRO; |
| } |
| |
| *val = adc->vref_mv[chan->channel]; |
| *val2 = chan->scan_type.realbits - |
| test_bit(chan->channel, &adc->is_divided); |
| return IIO_VAL_FRACTIONAL_LOG2; |
| |
| case IIO_CHAN_INFO_OFFSET: |
| if (chan->type == IIO_TEMP) { |
| /* |
| * The calculated value from the ADC is in Kelvin, we |
| * want Celsius for hwmon so the offset is -273.15 |
| * The offset is applied before scaling so it is |
| * actually -213.15 * 4 / 1.012 = -1079.644268 |
| */ |
| *val = -1079; |
| *val2 = 644268; |
| |
| return IIO_VAL_INT_PLUS_MICRO; |
| } |
| |
| return -EINVAL; |
| |
| default: |
| break; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int mxs_lradc_adc_write_raw(struct iio_dev *iio_dev, |
| const struct iio_chan_spec *chan, |
| int val, int val2, long m) |
| { |
| struct mxs_lradc_adc *adc = iio_priv(iio_dev); |
| struct mxs_lradc_scale *scale_avail = |
| adc->scale_avail[chan->channel]; |
| int ret; |
| |
| ret = iio_device_claim_direct_mode(iio_dev); |
| if (ret) |
| return ret; |
| |
| switch (m) { |
| case IIO_CHAN_INFO_SCALE: |
| ret = -EINVAL; |
| if (val == scale_avail[MXS_LRADC_DIV_DISABLED].integer && |
| val2 == scale_avail[MXS_LRADC_DIV_DISABLED].nano) { |
| /* divider by two disabled */ |
| clear_bit(chan->channel, &adc->is_divided); |
| ret = 0; |
| } else if (val == scale_avail[MXS_LRADC_DIV_ENABLED].integer && |
| val2 == scale_avail[MXS_LRADC_DIV_ENABLED].nano) { |
| /* divider by two enabled */ |
| set_bit(chan->channel, &adc->is_divided); |
| ret = 0; |
| } |
| |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| iio_device_release_direct_mode(iio_dev); |
| |
| return ret; |
| } |
| |
| static int mxs_lradc_adc_write_raw_get_fmt(struct iio_dev *iio_dev, |
| const struct iio_chan_spec *chan, |
| long m) |
| { |
| return IIO_VAL_INT_PLUS_NANO; |
| } |
| |
| static ssize_t mxs_lradc_adc_show_scale_avail(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct iio_dev *iio = dev_to_iio_dev(dev); |
| struct mxs_lradc_adc *adc = iio_priv(iio); |
| struct iio_dev_attr *iio_attr = to_iio_dev_attr(attr); |
| int i, ch, len = 0; |
| |
| ch = iio_attr->address; |
| for (i = 0; i < ARRAY_SIZE(adc->scale_avail[ch]); i++) |
| len += sprintf(buf + len, "%u.%09u ", |
| adc->scale_avail[ch][i].integer, |
| adc->scale_avail[ch][i].nano); |
| |
| len += sprintf(buf + len, "\n"); |
| |
| return len; |
| } |
| |
| #define SHOW_SCALE_AVAILABLE_ATTR(ch)\ |
| IIO_DEVICE_ATTR(in_voltage##ch##_scale_available, 0444,\ |
| mxs_lradc_adc_show_scale_avail, NULL, ch) |
| |
| SHOW_SCALE_AVAILABLE_ATTR(0); |
| SHOW_SCALE_AVAILABLE_ATTR(1); |
| SHOW_SCALE_AVAILABLE_ATTR(2); |
| SHOW_SCALE_AVAILABLE_ATTR(3); |
| SHOW_SCALE_AVAILABLE_ATTR(4); |
| SHOW_SCALE_AVAILABLE_ATTR(5); |
| SHOW_SCALE_AVAILABLE_ATTR(6); |
| SHOW_SCALE_AVAILABLE_ATTR(7); |
| SHOW_SCALE_AVAILABLE_ATTR(10); |
| SHOW_SCALE_AVAILABLE_ATTR(11); |
| SHOW_SCALE_AVAILABLE_ATTR(12); |
| SHOW_SCALE_AVAILABLE_ATTR(13); |
| SHOW_SCALE_AVAILABLE_ATTR(14); |
| SHOW_SCALE_AVAILABLE_ATTR(15); |
| |
| static struct attribute *mxs_lradc_adc_attributes[] = { |
| &iio_dev_attr_in_voltage0_scale_available.dev_attr.attr, |
| &iio_dev_attr_in_voltage1_scale_available.dev_attr.attr, |
| &iio_dev_attr_in_voltage2_scale_available.dev_attr.attr, |
| &iio_dev_attr_in_voltage3_scale_available.dev_attr.attr, |
| &iio_dev_attr_in_voltage4_scale_available.dev_attr.attr, |
| &iio_dev_attr_in_voltage5_scale_available.dev_attr.attr, |
| &iio_dev_attr_in_voltage6_scale_available.dev_attr.attr, |
| &iio_dev_attr_in_voltage7_scale_available.dev_attr.attr, |
| &iio_dev_attr_in_voltage10_scale_available.dev_attr.attr, |
| &iio_dev_attr_in_voltage11_scale_available.dev_attr.attr, |
| &iio_dev_attr_in_voltage12_scale_available.dev_attr.attr, |
| &iio_dev_attr_in_voltage13_scale_available.dev_attr.attr, |
| &iio_dev_attr_in_voltage14_scale_available.dev_attr.attr, |
| &iio_dev_attr_in_voltage15_scale_available.dev_attr.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group mxs_lradc_adc_attribute_group = { |
| .attrs = mxs_lradc_adc_attributes, |
| }; |
| |
| static const struct iio_info mxs_lradc_adc_iio_info = { |
| .driver_module = THIS_MODULE, |
| .read_raw = mxs_lradc_adc_read_raw, |
| .write_raw = mxs_lradc_adc_write_raw, |
| .write_raw_get_fmt = mxs_lradc_adc_write_raw_get_fmt, |
| .attrs = &mxs_lradc_adc_attribute_group, |
| }; |
| |
| /* IRQ Handling */ |
| static irqreturn_t mxs_lradc_adc_handle_irq(int irq, void *data) |
| { |
| struct iio_dev *iio = data; |
| struct mxs_lradc_adc *adc = iio_priv(iio); |
| struct mxs_lradc *lradc = adc->lradc; |
| unsigned long reg = readl(adc->base + LRADC_CTRL1); |
| unsigned long flags; |
| |
| if (!(reg & mxs_lradc_irq_mask(lradc))) |
| return IRQ_NONE; |
| |
| if (iio_buffer_enabled(iio)) { |
| if (reg & lradc->buffer_vchans) { |
| spin_lock_irqsave(&adc->lock, flags); |
| iio_trigger_poll(iio->trig); |
| spin_unlock_irqrestore(&adc->lock, flags); |
| } |
| } else if (reg & LRADC_CTRL1_LRADC_IRQ(0)) { |
| complete(&adc->completion); |
| } |
| |
| writel(reg & mxs_lradc_irq_mask(lradc), |
| adc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR); |
| |
| return IRQ_HANDLED; |
| } |
| |
| |
| /* Trigger handling */ |
| static irqreturn_t mxs_lradc_adc_trigger_handler(int irq, void *p) |
| { |
| struct iio_poll_func *pf = p; |
| struct iio_dev *iio = pf->indio_dev; |
| struct mxs_lradc_adc *adc = iio_priv(iio); |
| const u32 chan_value = LRADC_CH_ACCUMULATE | |
| ((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET); |
| unsigned int i, j = 0; |
| |
| for_each_set_bit(i, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) { |
| adc->buffer[j] = readl(adc->base + LRADC_CH(j)); |
| writel(chan_value, adc->base + LRADC_CH(j)); |
| adc->buffer[j] &= LRADC_CH_VALUE_MASK; |
| adc->buffer[j] /= LRADC_DELAY_TIMER_LOOP; |
| j++; |
| } |
| |
| iio_push_to_buffers_with_timestamp(iio, adc->buffer, pf->timestamp); |
| |
| iio_trigger_notify_done(iio->trig); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int mxs_lradc_adc_configure_trigger(struct iio_trigger *trig, bool state) |
| { |
| struct iio_dev *iio = iio_trigger_get_drvdata(trig); |
| struct mxs_lradc_adc *adc = iio_priv(iio); |
| const u32 st = state ? STMP_OFFSET_REG_SET : STMP_OFFSET_REG_CLR; |
| |
| writel(LRADC_DELAY_KICK, adc->base + (LRADC_DELAY(0) + st)); |
| |
| return 0; |
| } |
| |
| static const struct iio_trigger_ops mxs_lradc_adc_trigger_ops = { |
| .owner = THIS_MODULE, |
| .set_trigger_state = &mxs_lradc_adc_configure_trigger, |
| }; |
| |
| static int mxs_lradc_adc_trigger_init(struct iio_dev *iio) |
| { |
| int ret; |
| struct iio_trigger *trig; |
| struct mxs_lradc_adc *adc = iio_priv(iio); |
| |
| trig = devm_iio_trigger_alloc(&iio->dev, "%s-dev%i", iio->name, |
| iio->id); |
| |
| trig->dev.parent = adc->dev; |
| iio_trigger_set_drvdata(trig, iio); |
| trig->ops = &mxs_lradc_adc_trigger_ops; |
| |
| ret = iio_trigger_register(trig); |
| if (ret) |
| return ret; |
| |
| adc->trig = trig; |
| |
| return 0; |
| } |
| |
| static void mxs_lradc_adc_trigger_remove(struct iio_dev *iio) |
| { |
| struct mxs_lradc_adc *adc = iio_priv(iio); |
| |
| iio_trigger_unregister(adc->trig); |
| } |
| |
| static int mxs_lradc_adc_buffer_preenable(struct iio_dev *iio) |
| { |
| struct mxs_lradc_adc *adc = iio_priv(iio); |
| struct mxs_lradc *lradc = adc->lradc; |
| int chan, ofs = 0; |
| unsigned long enable = 0; |
| u32 ctrl4_set = 0; |
| u32 ctrl4_clr = 0; |
| u32 ctrl1_irq = 0; |
| const u32 chan_value = LRADC_CH_ACCUMULATE | |
| ((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET); |
| |
| if (lradc->soc == IMX28_LRADC) |
| writel(lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET, |
| adc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR); |
| writel(lradc->buffer_vchans, |
| adc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR); |
| |
| for_each_set_bit(chan, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) { |
| ctrl4_set |= chan << LRADC_CTRL4_LRADCSELECT_OFFSET(ofs); |
| ctrl4_clr |= LRADC_CTRL4_LRADCSELECT_MASK(ofs); |
| ctrl1_irq |= LRADC_CTRL1_LRADC_IRQ_EN(ofs); |
| writel(chan_value, adc->base + LRADC_CH(ofs)); |
| bitmap_set(&enable, ofs, 1); |
| ofs++; |
| } |
| |
| writel(LRADC_DELAY_TRIGGER_LRADCS_MASK | LRADC_DELAY_KICK, |
| adc->base + LRADC_DELAY(0) + STMP_OFFSET_REG_CLR); |
| writel(ctrl4_clr, adc->base + LRADC_CTRL4 + STMP_OFFSET_REG_CLR); |
| writel(ctrl4_set, adc->base + LRADC_CTRL4 + STMP_OFFSET_REG_SET); |
| writel(ctrl1_irq, adc->base + LRADC_CTRL1 + STMP_OFFSET_REG_SET); |
| writel(enable << LRADC_DELAY_TRIGGER_LRADCS_OFFSET, |
| adc->base + LRADC_DELAY(0) + STMP_OFFSET_REG_SET); |
| |
| return 0; |
| } |
| |
| static int mxs_lradc_adc_buffer_postdisable(struct iio_dev *iio) |
| { |
| struct mxs_lradc_adc *adc = iio_priv(iio); |
| struct mxs_lradc *lradc = adc->lradc; |
| |
| writel(LRADC_DELAY_TRIGGER_LRADCS_MASK | LRADC_DELAY_KICK, |
| adc->base + LRADC_DELAY(0) + STMP_OFFSET_REG_CLR); |
| |
| writel(lradc->buffer_vchans, |
| adc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR); |
| if (lradc->soc == IMX28_LRADC) |
| writel(lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET, |
| adc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR); |
| |
| return 0; |
| } |
| |
| static bool mxs_lradc_adc_validate_scan_mask(struct iio_dev *iio, |
| const unsigned long *mask) |
| { |
| struct mxs_lradc_adc *adc = iio_priv(iio); |
| struct mxs_lradc *lradc = adc->lradc; |
| const int map_chans = bitmap_weight(mask, LRADC_MAX_TOTAL_CHANS); |
| int rsvd_chans = 0; |
| unsigned long rsvd_mask = 0; |
| |
| if (lradc->use_touchbutton) |
| rsvd_mask |= CHAN_MASK_TOUCHBUTTON; |
| if (lradc->touchscreen_wire == MXS_LRADC_TOUCHSCREEN_4WIRE) |
| rsvd_mask |= CHAN_MASK_TOUCHSCREEN_4WIRE; |
| if (lradc->touchscreen_wire == MXS_LRADC_TOUCHSCREEN_5WIRE) |
| rsvd_mask |= CHAN_MASK_TOUCHSCREEN_5WIRE; |
| |
| if (lradc->use_touchbutton) |
| rsvd_chans++; |
| if (lradc->touchscreen_wire) |
| rsvd_chans += 2; |
| |
| /* Test for attempts to map channels with special mode of operation. */ |
| if (bitmap_intersects(mask, &rsvd_mask, LRADC_MAX_TOTAL_CHANS)) |
| return false; |
| |
| /* Test for attempts to map more channels then available slots. */ |
| if (map_chans + rsvd_chans > LRADC_MAX_MAPPED_CHANS) |
| return false; |
| |
| return true; |
| } |
| |
| static const struct iio_buffer_setup_ops mxs_lradc_adc_buffer_ops = { |
| .preenable = &mxs_lradc_adc_buffer_preenable, |
| .postenable = &iio_triggered_buffer_postenable, |
| .predisable = &iio_triggered_buffer_predisable, |
| .postdisable = &mxs_lradc_adc_buffer_postdisable, |
| .validate_scan_mask = &mxs_lradc_adc_validate_scan_mask, |
| }; |
| |
| /* Driver initialization */ |
| #define MXS_ADC_CHAN(idx, chan_type, name) { \ |
| .type = (chan_type), \ |
| .indexed = 1, \ |
| .scan_index = (idx), \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ |
| BIT(IIO_CHAN_INFO_SCALE), \ |
| .channel = (idx), \ |
| .address = (idx), \ |
| .scan_type = { \ |
| .sign = 'u', \ |
| .realbits = LRADC_RESOLUTION, \ |
| .storagebits = 32, \ |
| }, \ |
| .datasheet_name = (name), \ |
| } |
| |
| static const struct iio_chan_spec mx23_lradc_chan_spec[] = { |
| MXS_ADC_CHAN(0, IIO_VOLTAGE, "LRADC0"), |
| MXS_ADC_CHAN(1, IIO_VOLTAGE, "LRADC1"), |
| MXS_ADC_CHAN(2, IIO_VOLTAGE, "LRADC2"), |
| MXS_ADC_CHAN(3, IIO_VOLTAGE, "LRADC3"), |
| MXS_ADC_CHAN(4, IIO_VOLTAGE, "LRADC4"), |
| MXS_ADC_CHAN(5, IIO_VOLTAGE, "LRADC5"), |
| MXS_ADC_CHAN(6, IIO_VOLTAGE, "VDDIO"), |
| MXS_ADC_CHAN(7, IIO_VOLTAGE, "VBATT"), |
| /* Combined Temperature sensors */ |
| { |
| .type = IIO_TEMP, |
| .indexed = 1, |
| .scan_index = 8, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_OFFSET) | |
| BIT(IIO_CHAN_INFO_SCALE), |
| .channel = 8, |
| .scan_type = {.sign = 'u', .realbits = 18, .storagebits = 32,}, |
| .datasheet_name = "TEMP_DIE", |
| }, |
| /* Hidden channel to keep indexes */ |
| { |
| .type = IIO_TEMP, |
| .indexed = 1, |
| .scan_index = -1, |
| .channel = 9, |
| }, |
| MXS_ADC_CHAN(10, IIO_VOLTAGE, NULL), |
| MXS_ADC_CHAN(11, IIO_VOLTAGE, NULL), |
| MXS_ADC_CHAN(12, IIO_VOLTAGE, "USB_DP"), |
| MXS_ADC_CHAN(13, IIO_VOLTAGE, "USB_DN"), |
| MXS_ADC_CHAN(14, IIO_VOLTAGE, "VBG"), |
| MXS_ADC_CHAN(15, IIO_VOLTAGE, "VDD5V"), |
| }; |
| |
| static const struct iio_chan_spec mx28_lradc_chan_spec[] = { |
| MXS_ADC_CHAN(0, IIO_VOLTAGE, "LRADC0"), |
| MXS_ADC_CHAN(1, IIO_VOLTAGE, "LRADC1"), |
| MXS_ADC_CHAN(2, IIO_VOLTAGE, "LRADC2"), |
| MXS_ADC_CHAN(3, IIO_VOLTAGE, "LRADC3"), |
| MXS_ADC_CHAN(4, IIO_VOLTAGE, "LRADC4"), |
| MXS_ADC_CHAN(5, IIO_VOLTAGE, "LRADC5"), |
| MXS_ADC_CHAN(6, IIO_VOLTAGE, "LRADC6"), |
| MXS_ADC_CHAN(7, IIO_VOLTAGE, "VBATT"), |
| /* Combined Temperature sensors */ |
| { |
| .type = IIO_TEMP, |
| .indexed = 1, |
| .scan_index = 8, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_OFFSET) | |
| BIT(IIO_CHAN_INFO_SCALE), |
| .channel = 8, |
| .scan_type = {.sign = 'u', .realbits = 18, .storagebits = 32,}, |
| .datasheet_name = "TEMP_DIE", |
| }, |
| /* Hidden channel to keep indexes */ |
| { |
| .type = IIO_TEMP, |
| .indexed = 1, |
| .scan_index = -1, |
| .channel = 9, |
| }, |
| MXS_ADC_CHAN(10, IIO_VOLTAGE, "VDDIO"), |
| MXS_ADC_CHAN(11, IIO_VOLTAGE, "VTH"), |
| MXS_ADC_CHAN(12, IIO_VOLTAGE, "VDDA"), |
| MXS_ADC_CHAN(13, IIO_VOLTAGE, "VDDD"), |
| MXS_ADC_CHAN(14, IIO_VOLTAGE, "VBG"), |
| MXS_ADC_CHAN(15, IIO_VOLTAGE, "VDD5V"), |
| }; |
| |
| static void mxs_lradc_adc_hw_init(struct mxs_lradc_adc *adc) |
| { |
| /* The ADC always uses DELAY CHANNEL 0. */ |
| const u32 adc_cfg = |
| (1 << (LRADC_DELAY_TRIGGER_DELAYS_OFFSET + 0)) | |
| (LRADC_DELAY_TIMER_PER << LRADC_DELAY_DELAY_OFFSET); |
| |
| /* Configure DELAY CHANNEL 0 for generic ADC sampling. */ |
| writel(adc_cfg, adc->base + LRADC_DELAY(0)); |
| |
| /* |
| * Start internal temperature sensing by clearing bit |
| * HW_LRADC_CTRL2_TEMPSENSE_PWD. This bit can be left cleared |
| * after power up. |
| */ |
| writel(0, adc->base + LRADC_CTRL2); |
| } |
| |
| static void mxs_lradc_adc_hw_stop(struct mxs_lradc_adc *adc) |
| { |
| writel(0, adc->base + LRADC_DELAY(0)); |
| } |
| |
| static int mxs_lradc_adc_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct mxs_lradc *lradc = dev_get_drvdata(dev->parent); |
| struct mxs_lradc_adc *adc; |
| struct iio_dev *iio; |
| struct resource *iores; |
| int ret, irq, virq, i, s, n; |
| u64 scale_uv; |
| const char **irq_name; |
| |
| /* Allocate the IIO device. */ |
| iio = devm_iio_device_alloc(dev, sizeof(*adc)); |
| if (!iio) { |
| dev_err(dev, "Failed to allocate IIO device\n"); |
| return -ENOMEM; |
| } |
| |
| adc = iio_priv(iio); |
| adc->lradc = lradc; |
| adc->dev = dev; |
| |
| iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!iores) |
| return -EINVAL; |
| |
| adc->base = devm_ioremap(dev, iores->start, resource_size(iores)); |
| if (!adc->base) |
| return -ENOMEM; |
| |
| init_completion(&adc->completion); |
| spin_lock_init(&adc->lock); |
| |
| platform_set_drvdata(pdev, iio); |
| |
| iio->name = pdev->name; |
| iio->dev.parent = dev; |
| iio->dev.of_node = dev->parent->of_node; |
| iio->info = &mxs_lradc_adc_iio_info; |
| iio->modes = INDIO_DIRECT_MODE; |
| iio->masklength = LRADC_MAX_TOTAL_CHANS; |
| |
| if (lradc->soc == IMX23_LRADC) { |
| iio->channels = mx23_lradc_chan_spec; |
| iio->num_channels = ARRAY_SIZE(mx23_lradc_chan_spec); |
| irq_name = mx23_lradc_adc_irq_names; |
| n = ARRAY_SIZE(mx23_lradc_adc_irq_names); |
| } else { |
| iio->channels = mx28_lradc_chan_spec; |
| iio->num_channels = ARRAY_SIZE(mx28_lradc_chan_spec); |
| irq_name = mx28_lradc_adc_irq_names; |
| n = ARRAY_SIZE(mx28_lradc_adc_irq_names); |
| } |
| |
| ret = stmp_reset_block(adc->base); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < n; i++) { |
| irq = platform_get_irq_byname(pdev, irq_name[i]); |
| if (irq < 0) |
| return irq; |
| |
| virq = irq_of_parse_and_map(dev->parent->of_node, irq); |
| |
| ret = devm_request_irq(dev, virq, mxs_lradc_adc_handle_irq, |
| 0, irq_name[i], iio); |
| if (ret) |
| return ret; |
| } |
| |
| ret = mxs_lradc_adc_trigger_init(iio); |
| if (ret) |
| goto err_trig; |
| |
| ret = iio_triggered_buffer_setup(iio, &iio_pollfunc_store_time, |
| &mxs_lradc_adc_trigger_handler, |
| &mxs_lradc_adc_buffer_ops); |
| if (ret) |
| return ret; |
| |
| adc->vref_mv = mxs_lradc_adc_vref_mv[lradc->soc]; |
| |
| /* Populate available ADC input ranges */ |
| for (i = 0; i < LRADC_MAX_TOTAL_CHANS; i++) { |
| for (s = 0; s < ARRAY_SIZE(adc->scale_avail[i]); s++) { |
| /* |
| * [s=0] = optional divider by two disabled (default) |
| * [s=1] = optional divider by two enabled |
| * |
| * The scale is calculated by doing: |
| * Vref >> (realbits - s) |
| * which multiplies by two on the second component |
| * of the array. |
| */ |
| scale_uv = ((u64)adc->vref_mv[i] * 100000000) >> |
| (LRADC_RESOLUTION - s); |
| adc->scale_avail[i][s].nano = |
| do_div(scale_uv, 100000000) * 10; |
| adc->scale_avail[i][s].integer = scale_uv; |
| } |
| } |
| |
| /* Configure the hardware. */ |
| mxs_lradc_adc_hw_init(adc); |
| |
| /* Register IIO device. */ |
| ret = iio_device_register(iio); |
| if (ret) { |
| dev_err(dev, "Failed to register IIO device\n"); |
| goto err_dev; |
| } |
| |
| return 0; |
| |
| err_dev: |
| mxs_lradc_adc_hw_stop(adc); |
| mxs_lradc_adc_trigger_remove(iio); |
| err_trig: |
| iio_triggered_buffer_cleanup(iio); |
| return ret; |
| } |
| |
| static int mxs_lradc_adc_remove(struct platform_device *pdev) |
| { |
| struct iio_dev *iio = platform_get_drvdata(pdev); |
| struct mxs_lradc_adc *adc = iio_priv(iio); |
| |
| iio_device_unregister(iio); |
| mxs_lradc_adc_hw_stop(adc); |
| mxs_lradc_adc_trigger_remove(iio); |
| iio_triggered_buffer_cleanup(iio); |
| |
| return 0; |
| } |
| |
| static struct platform_driver mxs_lradc_adc_driver = { |
| .driver = { |
| .name = "mxs-lradc-adc", |
| }, |
| .probe = mxs_lradc_adc_probe, |
| .remove = mxs_lradc_adc_remove, |
| }; |
| module_platform_driver(mxs_lradc_adc_driver); |
| |
| MODULE_AUTHOR("Marek Vasut <marex@denx.de>"); |
| MODULE_DESCRIPTION("Freescale MXS LRADC driver general purpose ADC driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:mxs-lradc-adc"); |