drm/tilcdc: Set framebuffer DMA address to HW only if CRTC is enabled

Touching HW while clocks are off is a serious error and for instance
breaks suspend functionality. After this patch tilcdc_crtc_update_fb()
always updates the primary plane's framebuffer pointer, increases fb's
reference count and stores vblank event. tilcdc_crtc_update_fb() only
writes the fb's DMA address to HW if the crtc is enabled, as
tilcdc_crtc_enable() takes care of writing the address on enable.

This patch also refactors the tilcdc_crtc_update_fb() a bit. Number of
subsequent small changes had made it almost unreadable. There should
be no other functional changes but checking the CRTC's enable
state. However, the locking goes a bit differently and some of the
redundant checks have been removed in this new version.

The enable_lock should be enough to protect the access to
tilcdc_crtc->enabled. The irq_lock protects the access to last_vblank
and next_fb. The check for vrefresh and last_vblank being valid is
redundant, as the vrefresh should be always valid if the CRTC is
enabled and now last_vblank should be too, because it is initialized
to current time when CRTC raster is enabled. If for some reason the
values are not correctly initialized the division by zero warning is
quite appropriate.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
index abcbcd9..d745e8b 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
@@ -464,6 +464,7 @@
 {
 	struct drm_device *dev = crtc->dev;
 	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
+	unsigned long flags;
 
 	WARN_ON(!drm_modeset_is_locked(&crtc->mutex));
 	mutex_lock(&tilcdc_crtc->enable_lock);
@@ -484,7 +485,17 @@
 	tilcdc_write_mask(dev, LCDC_RASTER_CTRL_REG,
 			  LCDC_PALETTE_LOAD_MODE(DATA_ONLY),
 			  LCDC_PALETTE_LOAD_MODE_MASK);
+
+	/* There is no real chance for a race here as the time stamp
+	 * is taken before the raster DMA is started. The spin-lock is
+	 * taken to have a memory barrier after taking the time-stamp
+	 * and to avoid a context switch between taking the stamp and
+	 * enabling the raster.
+	 */
+	spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags);
+	tilcdc_crtc->last_vblank = ktime_get();
 	tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
+	spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags);
 
 	drm_crtc_vblank_on(crtc);
 
@@ -539,7 +550,6 @@
 	}
 
 	drm_flip_work_commit(&tilcdc_crtc->unref_work, priv->wq);
-	tilcdc_crtc->last_vblank = 0;
 
 	tilcdc_crtc->enabled = false;
 	mutex_unlock(&tilcdc_crtc->enable_lock);
@@ -602,7 +612,6 @@
 {
 	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 	struct drm_device *dev = crtc->dev;
-	unsigned long flags;
 
 	WARN_ON(!drm_modeset_is_locked(&crtc->mutex));
 
@@ -614,28 +623,30 @@
 	drm_framebuffer_reference(fb);
 
 	crtc->primary->fb = fb;
+	tilcdc_crtc->event = event;
 
-	spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags);
+	mutex_lock(&tilcdc_crtc->enable_lock);
 
-	if (crtc->hwmode.vrefresh && ktime_to_ns(tilcdc_crtc->last_vblank)) {
+	if (tilcdc_crtc->enabled) {
+		unsigned long flags;
 		ktime_t next_vblank;
 		s64 tdiff;
 
-		next_vblank = ktime_add_us(tilcdc_crtc->last_vblank,
-			1000000 / crtc->hwmode.vrefresh);
+		spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags);
 
+		next_vblank = ktime_add_us(tilcdc_crtc->last_vblank,
+					   1000000 / crtc->hwmode.vrefresh);
 		tdiff = ktime_to_us(ktime_sub(next_vblank, ktime_get()));
 
 		if (tdiff < TILCDC_VBLANK_SAFETY_THRESHOLD_US)
 			tilcdc_crtc->next_fb = fb;
+		else
+			set_scanout(crtc, fb);
+
+		spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags);
 	}
 
-	if (tilcdc_crtc->next_fb != fb)
-		set_scanout(crtc, fb);
-
-	tilcdc_crtc->event = event;
-
-	spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags);
+	mutex_unlock(&tilcdc_crtc->enable_lock);
 
 	return 0;
 }