bnxt_en: Update to Firmware 1.2.2 spec.
Use new field names in API structs and stop using deprecated fields
auto_link_speed and auto_duplex in phy_cfg/phy_qcfg structs.
Update copyright year to 2016.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 12a009d..bfe98cb 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -1,6 +1,6 @@
/* Broadcom NetXtreme-C/E network driver.
*
- * Copyright (c) 2014-2015 Broadcom Corporation
+ * Copyright (c) 2014-2016 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -2763,7 +2763,7 @@
* only checks if it is non-zero to enable async event forwarding
*/
req.async_event_fwd[0] |= cpu_to_le32(1);
- req.os_type = cpu_to_le16(1);
+ req.os_type = cpu_to_le16(FUNC_DRV_RGTR_REQ_OS_TYPE_LINUX);
req.ver_maj = DRV_VER_MAJ;
req.ver_min = DRV_VER_MIN;
req.ver_upd = DRV_VER_UPD;
@@ -3726,7 +3726,7 @@
pf->fw_fid = le16_to_cpu(resp->fid);
pf->port_id = le16_to_cpu(resp->port_id);
- memcpy(pf->mac_addr, resp->perm_mac_address, ETH_ALEN);
+ memcpy(pf->mac_addr, resp->mac_address, ETH_ALEN);
memcpy(bp->dev->dev_addr, pf->mac_addr, ETH_ALEN);
pf->max_rsscos_ctxs = le16_to_cpu(resp->max_rsscos_ctx);
pf->max_cp_rings = le16_to_cpu(resp->max_cmpl_rings);
@@ -3751,7 +3751,7 @@
struct bnxt_vf_info *vf = &bp->vf;
vf->fw_fid = le16_to_cpu(resp->fid);
- memcpy(vf->mac_addr, resp->perm_mac_address, ETH_ALEN);
+ memcpy(vf->mac_addr, resp->mac_address, ETH_ALEN);
if (is_valid_ether_addr(vf->mac_addr))
/* overwrite netdev dev_adr with admin VF MAC */
memcpy(bp->dev->dev_addr, vf->mac_addr, ETH_ALEN);
@@ -3842,6 +3842,8 @@
memcpy(&bp->ver_resp, resp, sizeof(struct hwrm_ver_get_output));
+ bp->hwrm_spec_code = resp->hwrm_intf_maj << 16 |
+ resp->hwrm_intf_min << 8 | resp->hwrm_intf_upd;
if (resp->hwrm_intf_maj < 1) {
netdev_warn(bp->dev, "HWRM interface %d.%d.%d is older than 1.0.0.\n",
resp->hwrm_intf_maj, resp->hwrm_intf_min,
@@ -4523,7 +4525,6 @@
else
link_info->link_speed = 0;
link_info->force_link_speed = le16_to_cpu(resp->force_link_speed);
- link_info->auto_link_speed = le16_to_cpu(resp->auto_link_speed);
link_info->support_speeds = le16_to_cpu(resp->support_speeds);
link_info->auto_link_speeds = le16_to_cpu(resp->auto_link_speed_mask);
link_info->lp_auto_link_speeds =
@@ -4533,8 +4534,8 @@
link_info->phy_ver[1] = resp->phy_min;
link_info->phy_ver[2] = resp->phy_bld;
link_info->media_type = resp->media_type;
- link_info->transceiver = resp->transceiver_type;
- link_info->phy_addr = resp->phy_addr;
+ link_info->transceiver = resp->xcvr_pkg_type;
+ link_info->phy_addr = resp->eee_config_phy_addr;
/* TODO: need to add more logic to report VF link */
if (chng_link_state) {
@@ -4581,7 +4582,7 @@
if (autoneg & BNXT_AUTONEG_SPEED) {
req->auto_mode |=
- PORT_PHY_CFG_REQ_AUTO_MODE_MASK;
+ PORT_PHY_CFG_REQ_AUTO_MODE_SPEED_MASK;
req->enables |= cpu_to_le32(
PORT_PHY_CFG_REQ_ENABLES_AUTO_LINK_SPEED_MASK);
@@ -4595,9 +4596,6 @@
req->flags |= cpu_to_le32(PORT_PHY_CFG_REQ_FLAGS_FORCE);
}
- /* currently don't support half duplex */
- req->auto_duplex = PORT_PHY_CFG_REQ_AUTO_DUPLEX_FULL;
- req->enables |= cpu_to_le32(PORT_PHY_CFG_REQ_ENABLES_AUTO_DUPLEX);
/* tell chimp that the setting takes effect immediately */
req->flags |= cpu_to_le32(PORT_PHY_CFG_REQ_FLAGS_RESET_PHY);
}