mfd: AB3100 OTP readout
This adds the ability to read out OTP (One-Time Programmable)
registers in the AB3100 MFD ASIC. It's a simple sysfs file you
can cat to prompt. The OTP registers of the AB3100 are used to
store various device-unique information such as customer ID,
product flags and the 3GPP standard IMEI (International Mobile
Equipment Indentity) number.
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index a4f3dff..4fd4f91 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -276,6 +276,15 @@
LEDs, vibrator, system power and temperature, power management
and ALSA sound.
+config AB3100_OTP
+ tristate "ST-Ericsson AB3100 OTP functions"
+ depends on AB3100_CORE
+ default y if AB3100_CORE
+ help
+ Select this to enable the AB3100 Mixed Signal IC OTP (one-time
+ programmable memory) support. This exposes a sysfs file to read
+ out OTP values.
+
config EZX_PCAP
bool "PCAP Support"
depends on GENERIC_HARDIRQS && SPI_MASTER
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 7fec04f..6a5d8cb 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -48,3 +48,4 @@
obj-$(CONFIG_PCF50633_ADC) += pcf50633-adc.o
obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o
obj-$(CONFIG_AB3100_CORE) += ab3100-core.o
+obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o
diff --git a/drivers/mfd/ab3100-otp.c b/drivers/mfd/ab3100-otp.c
new file mode 100644
index 0000000..0499b20
--- /dev/null
+++ b/drivers/mfd/ab3100-otp.c
@@ -0,0 +1,268 @@
+/*
+ * drivers/mfd/ab3100_otp.c
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Driver to read out OTP from the AB3100 Mixed-signal circuit
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/ab3100.h>
+#include <linux/debugfs.h>
+
+/* The OTP registers */
+#define AB3100_OTP0 0xb0
+#define AB3100_OTP1 0xb1
+#define AB3100_OTP2 0xb2
+#define AB3100_OTP3 0xb3
+#define AB3100_OTP4 0xb4
+#define AB3100_OTP5 0xb5
+#define AB3100_OTP6 0xb6
+#define AB3100_OTP7 0xb7
+#define AB3100_OTPP 0xbf
+
+/**
+ * struct ab3100_otp
+ * @dev containing device
+ * @ab3100 a pointer to the parent ab3100 device struct
+ * @locked whether the OTP is locked, after locking, no more bits
+ * can be changed but before locking it is still possible
+ * to change bits from 1->0.
+ * @freq clocking frequency for the OTP, this frequency is either
+ * 32768Hz or 1MHz/30
+ * @paf product activation flag, indicates whether this is a real
+ * product (paf true) or a lab board etc (paf false)
+ * @imeich if this is set it is possible to override the
+ * IMEI number found in the tac, fac and svn fields with
+ * (secured) software
+ * @cid customer ID
+ * @tac type allocation code of the IMEI
+ * @fac final assembly code of the IMEI
+ * @svn software version number of the IMEI
+ * @debugfs a debugfs file used when dumping to file
+ */
+struct ab3100_otp {
+ struct device *dev;
+ struct ab3100 *ab3100;
+ bool locked;
+ u32 freq;
+ bool paf;
+ bool imeich;
+ u16 cid:14;
+ u32 tac:20;
+ u8 fac;
+ u32 svn:20;
+ struct dentry *debugfs;
+};
+
+static int __init ab3100_otp_read(struct ab3100_otp *otp)
+{
+ struct ab3100 *ab = otp->ab3100;
+ u8 otpval[8];
+ u8 otpp;
+ int err;
+
+ err = ab3100_get_register_interruptible(ab, AB3100_OTPP, &otpp);
+ if (err) {
+ dev_err(otp->dev, "unable to read OTPP register\n");
+ return err;
+ }
+
+ err = ab3100_get_register_page_interruptible(ab, AB3100_OTP0,
+ otpval, 8);
+ if (err) {
+ dev_err(otp->dev, "unable to read OTP register page\n");
+ return err;
+ }
+
+ /* Cache OTP properties, they never change by nature */
+ otp->locked = (otpp & 0x80);
+ otp->freq = (otpp & 0x40) ? 32768 : 34100;
+ otp->paf = (otpval[1] & 0x80);
+ otp->imeich = (otpval[1] & 0x40);
+ otp->cid = ((otpval[1] << 8) | otpval[0]) & 0x3fff;
+ otp->tac = ((otpval[4] & 0x0f) << 16) | (otpval[3] << 8) | otpval[2];
+ otp->fac = ((otpval[5] & 0x0f) << 4) | (otpval[4] >> 4);
+ otp->svn = (otpval[7] << 12) | (otpval[6] << 4) | (otpval[5] >> 4);
+ return 0;
+}
+
+/*
+ * This is a simple debugfs human-readable file that dumps out
+ * the contents of the OTP.
+ */
+#ifdef CONFIG_DEBUGFS
+static int show_otp(struct seq_file *s, void *v)
+{
+ struct ab3100_otp *otp = s->private;
+ int err;
+
+ seq_printf(s, "OTP is %s\n", otp->locked ? "LOCKED" : "UNLOCKED");
+ seq_printf(s, "OTP clock switch startup is %uHz\n", otp->freq);
+ seq_printf(s, "PAF is %s\n", otp->paf ? "SET" : "NOT SET");
+ seq_printf(s, "IMEI is %s\n", otp->imeich ?
+ "CHANGEABLE" : "NOT CHANGEABLE");
+ seq_printf(s, "CID: 0x%04x (decimal: %d)\n", otp->cid, otp->cid);
+ seq_printf(s, "IMEI: %u-%u-%u\n", otp->tac, otp->fac, otp->svn);
+ return 0;
+}
+
+static int ab3100_otp_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab3100_otp_show, inode->i_private);
+}
+
+static const struct file_operations ab3100_otp_operations = {
+ .open = ab3100_otp_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int __init ab3100_otp_init_debugfs(struct device *dev,
+ struct ab3100_otp *otp)
+{
+ otp->debugfs = debugfs_create_file("ab3100_otp", S_IFREG | S_IRUGO,
+ NULL, otp,
+ &ab3100_otp_operations);
+ if (!otp->debugfs) {
+ dev_err(dev, "AB3100 debugfs OTP file registration failed!\n");
+ return err;
+ }
+}
+
+static void __exit ab3100_otp_exit_debugfs(struct ab3100_otp *otp)
+{
+ debugfs_remove_file(otp->debugfs);
+}
+#else
+/* Compile this out if debugfs not selected */
+static inline int __init ab3100_otp_init_debugfs(struct device *dev,
+ struct ab3100_otp *otp)
+{
+ return 0;
+}
+
+static inline void __exit ab3100_otp_exit_debugfs(struct ab3100_otp *otp)
+{
+}
+#endif
+
+#define SHOW_AB3100_ATTR(name) \
+static ssize_t ab3100_otp_##name##_show(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{\
+ struct ab3100_otp *otp = dev_get_drvdata(dev); \
+ return sprintf(buf, "%u\n", otp->name); \
+}
+
+SHOW_AB3100_ATTR(locked)
+SHOW_AB3100_ATTR(freq)
+SHOW_AB3100_ATTR(paf)
+SHOW_AB3100_ATTR(imeich)
+SHOW_AB3100_ATTR(cid)
+SHOW_AB3100_ATTR(fac)
+SHOW_AB3100_ATTR(tac)
+SHOW_AB3100_ATTR(svn)
+
+static struct device_attribute ab3100_otp_attrs[] = {
+ __ATTR(locked, S_IRUGO, ab3100_otp_locked_show, NULL),
+ __ATTR(freq, S_IRUGO, ab3100_otp_freq_show, NULL),
+ __ATTR(paf, S_IRUGO, ab3100_otp_paf_show, NULL),
+ __ATTR(imeich, S_IRUGO, ab3100_otp_imeich_show, NULL),
+ __ATTR(cid, S_IRUGO, ab3100_otp_cid_show, NULL),
+ __ATTR(fac, S_IRUGO, ab3100_otp_fac_show, NULL),
+ __ATTR(tac, S_IRUGO, ab3100_otp_tac_show, NULL),
+ __ATTR(svn, S_IRUGO, ab3100_otp_svn_show, NULL),
+};
+
+static int __init ab3100_otp_probe(struct platform_device *pdev)
+{
+ struct ab3100_otp *otp;
+ int err = 0;
+ int i;
+
+ otp = kzalloc(sizeof(struct ab3100_otp), GFP_KERNEL);
+ if (!otp) {
+ dev_err(&pdev->dev, "could not allocate AB3100 OTP device\n");
+ return -ENOMEM;
+ }
+ otp->dev = &pdev->dev;
+
+ /* Replace platform data coming in with a local struct */
+ otp->ab3100 = platform_get_drvdata(pdev);
+ platform_set_drvdata(pdev, otp);
+
+ err = ab3100_otp_read(otp);
+ if (err)
+ return err;
+
+ dev_info(&pdev->dev, "AB3100 OTP readout registered\n");
+
+ /* sysfs entries */
+ for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++) {
+ err = device_create_file(&pdev->dev,
+ &ab3100_otp_attrs[i]);
+ if (err)
+ goto out_no_sysfs;
+ }
+
+ /* debugfs entries */
+ err = ab3100_otp_init_debugfs(&pdev->dev, otp);
+ if (err)
+ goto out_no_debugfs;
+
+ return 0;
+
+out_no_sysfs:
+ for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++)
+ device_remove_file(&pdev->dev,
+ &ab3100_otp_attrs[i]);
+out_no_debugfs:
+ kfree(otp);
+ return err;
+}
+
+static int __exit ab3100_otp_remove(struct platform_device *pdev)
+{
+ struct ab3100_otp *otp = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++)
+ device_remove_file(&pdev->dev,
+ &ab3100_otp_attrs[i]);
+ ab3100_otp_exit_debugfs(otp);
+ kfree(otp);
+ return 0;
+}
+
+static struct platform_driver ab3100_otp_driver = {
+ .driver = {
+ .name = "ab3100-otp",
+ .owner = THIS_MODULE,
+ },
+ .remove = __exit_p(ab3100_otp_remove),
+};
+
+static int __init ab3100_otp_init(void)
+{
+ return platform_driver_probe(&ab3100_otp_driver,
+ ab3100_otp_probe);
+}
+
+static void __exit ab3100_otp_exit(void)
+{
+ platform_driver_unregister(&ab3100_otp_driver);
+}
+
+module_init(ab3100_otp_init);
+module_exit(ab3100_otp_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("AB3100 OTP Readout Driver");
+MODULE_LICENSE("GPL");