| /* |
| * linux/drivers/power/wm97xx_battery.c |
| * |
| * Battery measurement code for WM97xx |
| * |
| * based on tosa_battery.c |
| * |
| * Copyright (C) 2008 Marek Vasut <marek.vasut@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/power_supply.h> |
| #include <linux/wm97xx.h> |
| #include <linux/spinlock.h> |
| #include <linux/interrupt.h> |
| #include <linux/gpio.h> |
| #include <linux/irq.h> |
| |
| static DEFINE_MUTEX(bat_lock); |
| static struct work_struct bat_work; |
| struct mutex work_lock; |
| static int bat_status = POWER_SUPPLY_STATUS_UNKNOWN; |
| static struct wm97xx_batt_info *gpdata; |
| static enum power_supply_property *prop; |
| |
| static unsigned long wm97xx_read_bat(struct power_supply *bat_ps) |
| { |
| struct wm97xx_pdata *wmdata = bat_ps->dev->parent->platform_data; |
| struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata; |
| |
| return wm97xx_read_aux_adc(dev_get_drvdata(bat_ps->dev->parent), |
| pdata->batt_aux) * pdata->batt_mult / |
| pdata->batt_div; |
| } |
| |
| static unsigned long wm97xx_read_temp(struct power_supply *bat_ps) |
| { |
| struct wm97xx_pdata *wmdata = bat_ps->dev->parent->platform_data; |
| struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata; |
| |
| return wm97xx_read_aux_adc(dev_get_drvdata(bat_ps->dev->parent), |
| pdata->temp_aux) * pdata->temp_mult / |
| pdata->temp_div; |
| } |
| |
| static int wm97xx_bat_get_property(struct power_supply *bat_ps, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct wm97xx_pdata *wmdata = bat_ps->dev->parent->platform_data; |
| struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_STATUS: |
| val->intval = bat_status; |
| break; |
| case POWER_SUPPLY_PROP_TECHNOLOGY: |
| val->intval = pdata->batt_tech; |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| if (pdata->batt_aux >= 0) |
| val->intval = wm97xx_read_bat(bat_ps); |
| else |
| return -EINVAL; |
| break; |
| case POWER_SUPPLY_PROP_TEMP: |
| if (pdata->temp_aux >= 0) |
| val->intval = wm97xx_read_temp(bat_ps); |
| else |
| return -EINVAL; |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_MAX: |
| if (pdata->max_voltage >= 0) |
| val->intval = pdata->max_voltage; |
| else |
| return -EINVAL; |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_MIN: |
| if (pdata->min_voltage >= 0) |
| val->intval = pdata->min_voltage; |
| else |
| return -EINVAL; |
| break; |
| case POWER_SUPPLY_PROP_PRESENT: |
| val->intval = 1; |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static void wm97xx_bat_external_power_changed(struct power_supply *bat_ps) |
| { |
| schedule_work(&bat_work); |
| } |
| |
| static void wm97xx_bat_update(struct power_supply *bat_ps) |
| { |
| int old_status = bat_status; |
| struct wm97xx_pdata *wmdata = bat_ps->dev->parent->platform_data; |
| struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata; |
| |
| mutex_lock(&work_lock); |
| |
| bat_status = (pdata->charge_gpio >= 0) ? |
| (gpio_get_value(pdata->charge_gpio) ? |
| POWER_SUPPLY_STATUS_DISCHARGING : |
| POWER_SUPPLY_STATUS_CHARGING) : |
| POWER_SUPPLY_STATUS_UNKNOWN; |
| |
| if (old_status != bat_status) { |
| pr_debug("%s: %i -> %i\n", bat_ps->name, old_status, |
| bat_status); |
| power_supply_changed(bat_ps); |
| } |
| |
| mutex_unlock(&work_lock); |
| } |
| |
| static struct power_supply bat_ps = { |
| .type = POWER_SUPPLY_TYPE_BATTERY, |
| .get_property = wm97xx_bat_get_property, |
| .external_power_changed = wm97xx_bat_external_power_changed, |
| .use_for_apm = 1, |
| }; |
| |
| static void wm97xx_bat_work(struct work_struct *work) |
| { |
| wm97xx_bat_update(&bat_ps); |
| } |
| |
| static irqreturn_t wm97xx_chrg_irq(int irq, void *data) |
| { |
| schedule_work(&bat_work); |
| return IRQ_HANDLED; |
| } |
| |
| #ifdef CONFIG_PM |
| static int wm97xx_bat_suspend(struct device *dev) |
| { |
| flush_scheduled_work(); |
| return 0; |
| } |
| |
| static int wm97xx_bat_resume(struct device *dev) |
| { |
| schedule_work(&bat_work); |
| return 0; |
| } |
| |
| static const struct dev_pm_ops wm97xx_bat_pm_ops = { |
| .suspend = wm97xx_bat_suspend, |
| .resume = wm97xx_bat_resume, |
| }; |
| #endif |
| |
| static int __devinit wm97xx_bat_probe(struct platform_device *dev) |
| { |
| int ret = 0; |
| int props = 1; /* POWER_SUPPLY_PROP_PRESENT */ |
| int i = 0; |
| struct wm97xx_pdata *wmdata = dev->dev.platform_data; |
| struct wm97xx_batt_pdata *pdata; |
| |
| if (gpdata) { |
| dev_err(&dev->dev, "Do not pass platform_data through " |
| "wm97xx_bat_set_pdata!\n"); |
| return -EINVAL; |
| } |
| |
| if (!wmdata) { |
| dev_err(&dev->dev, "No platform data supplied\n"); |
| return -EINVAL; |
| } |
| |
| pdata = wmdata->batt_pdata; |
| |
| if (dev->id != -1) |
| return -EINVAL; |
| |
| mutex_init(&work_lock); |
| |
| if (!pdata) { |
| dev_err(&dev->dev, "No platform_data supplied\n"); |
| return -EINVAL; |
| } |
| |
| if (gpio_is_valid(pdata->charge_gpio)) { |
| ret = gpio_request(pdata->charge_gpio, "BATT CHRG"); |
| if (ret) |
| goto err; |
| ret = gpio_direction_input(pdata->charge_gpio); |
| if (ret) |
| goto err2; |
| ret = request_irq(gpio_to_irq(pdata->charge_gpio), |
| wm97xx_chrg_irq, IRQF_DISABLED, |
| "AC Detect", 0); |
| if (ret) |
| goto err2; |
| props++; /* POWER_SUPPLY_PROP_STATUS */ |
| } |
| |
| if (pdata->batt_tech >= 0) |
| props++; /* POWER_SUPPLY_PROP_TECHNOLOGY */ |
| if (pdata->temp_aux >= 0) |
| props++; /* POWER_SUPPLY_PROP_TEMP */ |
| if (pdata->batt_aux >= 0) |
| props++; /* POWER_SUPPLY_PROP_VOLTAGE_NOW */ |
| if (pdata->max_voltage >= 0) |
| props++; /* POWER_SUPPLY_PROP_VOLTAGE_MAX */ |
| if (pdata->min_voltage >= 0) |
| props++; /* POWER_SUPPLY_PROP_VOLTAGE_MIN */ |
| |
| prop = kzalloc(props * sizeof(*prop), GFP_KERNEL); |
| if (!prop) |
| goto err3; |
| |
| prop[i++] = POWER_SUPPLY_PROP_PRESENT; |
| if (pdata->charge_gpio >= 0) |
| prop[i++] = POWER_SUPPLY_PROP_STATUS; |
| if (pdata->batt_tech >= 0) |
| prop[i++] = POWER_SUPPLY_PROP_TECHNOLOGY; |
| if (pdata->temp_aux >= 0) |
| prop[i++] = POWER_SUPPLY_PROP_TEMP; |
| if (pdata->batt_aux >= 0) |
| prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_NOW; |
| if (pdata->max_voltage >= 0) |
| prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_MAX; |
| if (pdata->min_voltage >= 0) |
| prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_MIN; |
| |
| INIT_WORK(&bat_work, wm97xx_bat_work); |
| |
| if (!pdata->batt_name) { |
| dev_info(&dev->dev, "Please consider setting proper battery " |
| "name in platform definition file, falling " |
| "back to name \"wm97xx-batt\"\n"); |
| bat_ps.name = "wm97xx-batt"; |
| } else |
| bat_ps.name = pdata->batt_name; |
| |
| bat_ps.properties = prop; |
| bat_ps.num_properties = props; |
| |
| ret = power_supply_register(&dev->dev, &bat_ps); |
| if (!ret) |
| schedule_work(&bat_work); |
| else |
| goto err4; |
| |
| return 0; |
| err4: |
| kfree(prop); |
| err3: |
| if (gpio_is_valid(pdata->charge_gpio)) |
| free_irq(gpio_to_irq(pdata->charge_gpio), dev); |
| err2: |
| if (gpio_is_valid(pdata->charge_gpio)) |
| gpio_free(pdata->charge_gpio); |
| err: |
| return ret; |
| } |
| |
| static int __devexit wm97xx_bat_remove(struct platform_device *dev) |
| { |
| struct wm97xx_pdata *wmdata = dev->dev.platform_data; |
| struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata; |
| |
| if (pdata && gpio_is_valid(pdata->charge_gpio)) { |
| free_irq(gpio_to_irq(pdata->charge_gpio), dev); |
| gpio_free(pdata->charge_gpio); |
| } |
| flush_scheduled_work(); |
| power_supply_unregister(&bat_ps); |
| kfree(prop); |
| return 0; |
| } |
| |
| static struct platform_driver wm97xx_bat_driver = { |
| .driver = { |
| .name = "wm97xx-battery", |
| .owner = THIS_MODULE, |
| #ifdef CONFIG_PM |
| .pm = &wm97xx_bat_pm_ops, |
| #endif |
| }, |
| .probe = wm97xx_bat_probe, |
| .remove = __devexit_p(wm97xx_bat_remove), |
| }; |
| |
| static int __init wm97xx_bat_init(void) |
| { |
| return platform_driver_register(&wm97xx_bat_driver); |
| } |
| |
| static void __exit wm97xx_bat_exit(void) |
| { |
| platform_driver_unregister(&wm97xx_bat_driver); |
| } |
| |
| void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data) |
| { |
| gpdata = data; |
| } |
| EXPORT_SYMBOL_GPL(wm97xx_bat_set_pdata); |
| |
| module_init(wm97xx_bat_init); |
| module_exit(wm97xx_bat_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); |
| MODULE_DESCRIPTION("WM97xx battery driver"); |