[media] s5p-fimc: Convert to use generic media bus polarity flags
Switch to generic media bus signal polarity flags and allow
configuring the FIELD signal polarity.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/s5p-fimc/fimc-reg.c b/drivers/media/video/s5p-fimc/fimc-reg.c
index 2a1ae51..20e664e 100644
--- a/drivers/media/video/s5p-fimc/fimc-reg.c
+++ b/drivers/media/video/s5p-fimc/fimc-reg.c
@@ -533,20 +533,24 @@
u32 cfg = readl(fimc->regs + S5P_CIGCTRL);
cfg &= ~(S5P_CIGCTRL_INVPOLPCLK | S5P_CIGCTRL_INVPOLVSYNC |
- S5P_CIGCTRL_INVPOLHREF | S5P_CIGCTRL_INVPOLHSYNC);
+ S5P_CIGCTRL_INVPOLHREF | S5P_CIGCTRL_INVPOLHSYNC |
+ S5P_CIGCTRL_INVPOLFIELD);
- if (cam->flags & FIMC_CLK_INV_PCLK)
+ if (cam->flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
cfg |= S5P_CIGCTRL_INVPOLPCLK;
- if (cam->flags & FIMC_CLK_INV_VSYNC)
+ if (cam->flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
cfg |= S5P_CIGCTRL_INVPOLVSYNC;
- if (cam->flags & FIMC_CLK_INV_HREF)
+ if (cam->flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
cfg |= S5P_CIGCTRL_INVPOLHREF;
- if (cam->flags & FIMC_CLK_INV_HSYNC)
+ if (cam->flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
cfg |= S5P_CIGCTRL_INVPOLHSYNC;
+ if (cam->flags & V4L2_MBUS_FIELD_EVEN_LOW)
+ cfg |= S5P_CIGCTRL_INVPOLFIELD;
+
writel(cfg, fimc->regs + S5P_CIGCTRL);
return 0;
diff --git a/drivers/media/video/s5p-fimc/regs-fimc.h b/drivers/media/video/s5p-fimc/regs-fimc.h
index 94d2302..c8e3b94 100644
--- a/drivers/media/video/s5p-fimc/regs-fimc.h
+++ b/drivers/media/video/s5p-fimc/regs-fimc.h
@@ -61,6 +61,7 @@
#define S5P_CIGCTRL_CSC_ITU601_709 (1 << 5)
#define S5P_CIGCTRL_INVPOLHSYNC (1 << 4)
#define S5P_CIGCTRL_SELCAM_MIPI (1 << 3)
+#define S5P_CIGCTRL_INVPOLFIELD (1 << 1)
#define S5P_CIGCTRL_INTERLACE (1 << 0)
/* Window offset 2 */
diff --git a/include/media/s5p_fimc.h b/include/media/s5p_fimc.h
index 2b58904..688fb3f 100644
--- a/include/media/s5p_fimc.h
+++ b/include/media/s5p_fimc.h
@@ -19,11 +19,6 @@
FIMC_LCD_WB, /* FIFO link from LCD mixer */
};
-#define FIMC_CLK_INV_PCLK (1 << 0)
-#define FIMC_CLK_INV_VSYNC (1 << 1)
-#define FIMC_CLK_INV_HREF (1 << 2)
-#define FIMC_CLK_INV_HSYNC (1 << 3)
-
struct i2c_board_info;
/**
@@ -37,7 +32,7 @@
* @i2c_bus_num: i2c control bus id the sensor is attached to
* @mux_id: FIMC camera interface multiplexer index (separate for MIPI and ITU)
* @clk_id: index of the SoC peripheral clock for sensors
- * @flags: flags defining bus signals polarity inversion (High by default)
+ * @flags: the parallel bus flags defining signals polarity (V4L2_MBUS_*)
*/
struct s5p_fimc_isp_info {
struct i2c_board_info *board_info;