| /* |
| * Samsung Laptop driver |
| * |
| * Copyright (C) 2009,2011 Greg Kroah-Hartman (gregkh@suse.de) |
| * Copyright (C) 2009,2011 Novell Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| */ |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/pci.h> |
| #include <linux/backlight.h> |
| #include <linux/leds.h> |
| #include <linux/fb.h> |
| #include <linux/dmi.h> |
| #include <linux/platform_device.h> |
| #include <linux/rfkill.h> |
| #include <linux/acpi.h> |
| #include <linux/seq_file.h> |
| #include <linux/debugfs.h> |
| #include <linux/ctype.h> |
| #include <linux/efi.h> |
| #include <linux/suspend.h> |
| #include <acpi/video.h> |
| |
| /* |
| * This driver is needed because a number of Samsung laptops do not hook |
| * their control settings through ACPI. So we have to poke around in the |
| * BIOS to do things like brightness values, and "special" key controls. |
| */ |
| |
| /* |
| * We have 0 - 8 as valid brightness levels. The specs say that level 0 should |
| * be reserved by the BIOS (which really doesn't make much sense), we tell |
| * userspace that the value is 0 - 7 and then just tell the hardware 1 - 8 |
| */ |
| #define MAX_BRIGHT 0x07 |
| |
| |
| #define SABI_IFACE_MAIN 0x00 |
| #define SABI_IFACE_SUB 0x02 |
| #define SABI_IFACE_COMPLETE 0x04 |
| #define SABI_IFACE_DATA 0x05 |
| |
| #define WL_STATUS_WLAN 0x0 |
| #define WL_STATUS_BT 0x2 |
| |
| /* Structure get/set data using sabi */ |
| struct sabi_data { |
| union { |
| struct { |
| u32 d0; |
| u32 d1; |
| u16 d2; |
| u8 d3; |
| }; |
| u8 data[11]; |
| }; |
| }; |
| |
| struct sabi_header_offsets { |
| u8 port; |
| u8 re_mem; |
| u8 iface_func; |
| u8 en_mem; |
| u8 data_offset; |
| u8 data_segment; |
| }; |
| |
| struct sabi_commands { |
| /* |
| * Brightness is 0 - 8, as described above. |
| * Value 0 is for the BIOS to use |
| */ |
| u16 get_brightness; |
| u16 set_brightness; |
| |
| /* |
| * first byte: |
| * 0x00 - wireless is off |
| * 0x01 - wireless is on |
| * second byte: |
| * 0x02 - 3G is off |
| * 0x03 - 3G is on |
| * TODO, verify 3G is correct, that doesn't seem right... |
| */ |
| u16 get_wireless_button; |
| u16 set_wireless_button; |
| |
| /* 0 is off, 1 is on */ |
| u16 get_backlight; |
| u16 set_backlight; |
| |
| /* |
| * 0x80 or 0x00 - no action |
| * 0x81 - recovery key pressed |
| */ |
| u16 get_recovery_mode; |
| u16 set_recovery_mode; |
| |
| /* |
| * on seclinux: 0 is low, 1 is high, |
| * on swsmi: 0 is normal, 1 is silent, 2 is turbo |
| */ |
| u16 get_performance_level; |
| u16 set_performance_level; |
| |
| /* 0x80 is off, 0x81 is on */ |
| u16 get_battery_life_extender; |
| u16 set_battery_life_extender; |
| |
| /* 0x80 is off, 0x81 is on */ |
| u16 get_usb_charge; |
| u16 set_usb_charge; |
| |
| /* the first byte is for bluetooth and the third one is for wlan */ |
| u16 get_wireless_status; |
| u16 set_wireless_status; |
| |
| /* 0x80 is off, 0x81 is on */ |
| u16 get_lid_handling; |
| u16 set_lid_handling; |
| |
| /* 0x81 to read, (0x82 | level << 8) to set, 0xaabb to enable */ |
| u16 kbd_backlight; |
| |
| /* |
| * Tell the BIOS that Linux is running on this machine. |
| * 81 is on, 80 is off |
| */ |
| u16 set_linux; |
| }; |
| |
| struct sabi_performance_level { |
| const char *name; |
| u16 value; |
| }; |
| |
| struct sabi_config { |
| int sabi_version; |
| const char *test_string; |
| u16 main_function; |
| const struct sabi_header_offsets header_offsets; |
| const struct sabi_commands commands; |
| const struct sabi_performance_level performance_levels[4]; |
| u8 min_brightness; |
| u8 max_brightness; |
| }; |
| |
| static const struct sabi_config sabi_configs[] = { |
| { |
| /* I don't know if it is really 2, but it it is |
| * less than 3 anyway */ |
| .sabi_version = 2, |
| |
| .test_string = "SECLINUX", |
| |
| .main_function = 0x4c49, |
| |
| .header_offsets = { |
| .port = 0x00, |
| .re_mem = 0x02, |
| .iface_func = 0x03, |
| .en_mem = 0x04, |
| .data_offset = 0x05, |
| .data_segment = 0x07, |
| }, |
| |
| .commands = { |
| .get_brightness = 0x00, |
| .set_brightness = 0x01, |
| |
| .get_wireless_button = 0x02, |
| .set_wireless_button = 0x03, |
| |
| .get_backlight = 0x04, |
| .set_backlight = 0x05, |
| |
| .get_recovery_mode = 0x06, |
| .set_recovery_mode = 0x07, |
| |
| .get_performance_level = 0x08, |
| .set_performance_level = 0x09, |
| |
| .get_battery_life_extender = 0xFFFF, |
| .set_battery_life_extender = 0xFFFF, |
| |
| .get_usb_charge = 0xFFFF, |
| .set_usb_charge = 0xFFFF, |
| |
| .get_wireless_status = 0xFFFF, |
| .set_wireless_status = 0xFFFF, |
| |
| .get_lid_handling = 0xFFFF, |
| .set_lid_handling = 0xFFFF, |
| |
| .kbd_backlight = 0xFFFF, |
| |
| .set_linux = 0x0a, |
| }, |
| |
| .performance_levels = { |
| { |
| .name = "silent", |
| .value = 0, |
| }, |
| { |
| .name = "normal", |
| .value = 1, |
| }, |
| { }, |
| }, |
| .min_brightness = 1, |
| .max_brightness = 8, |
| }, |
| { |
| .sabi_version = 3, |
| |
| .test_string = "SwSmi@", |
| |
| .main_function = 0x5843, |
| |
| .header_offsets = { |
| .port = 0x00, |
| .re_mem = 0x04, |
| .iface_func = 0x02, |
| .en_mem = 0x03, |
| .data_offset = 0x05, |
| .data_segment = 0x07, |
| }, |
| |
| .commands = { |
| .get_brightness = 0x10, |
| .set_brightness = 0x11, |
| |
| .get_wireless_button = 0x12, |
| .set_wireless_button = 0x13, |
| |
| .get_backlight = 0x2d, |
| .set_backlight = 0x2e, |
| |
| .get_recovery_mode = 0xff, |
| .set_recovery_mode = 0xff, |
| |
| .get_performance_level = 0x31, |
| .set_performance_level = 0x32, |
| |
| .get_battery_life_extender = 0x65, |
| .set_battery_life_extender = 0x66, |
| |
| .get_usb_charge = 0x67, |
| .set_usb_charge = 0x68, |
| |
| .get_wireless_status = 0x69, |
| .set_wireless_status = 0x6a, |
| |
| .get_lid_handling = 0x6d, |
| .set_lid_handling = 0x6e, |
| |
| .kbd_backlight = 0x78, |
| |
| .set_linux = 0xff, |
| }, |
| |
| .performance_levels = { |
| { |
| .name = "normal", |
| .value = 0, |
| }, |
| { |
| .name = "silent", |
| .value = 1, |
| }, |
| { |
| .name = "overclock", |
| .value = 2, |
| }, |
| { }, |
| }, |
| .min_brightness = 0, |
| .max_brightness = 8, |
| }, |
| { }, |
| }; |
| |
| /* |
| * samsung-laptop/ - debugfs root directory |
| * f0000_segment - dump f0000 segment |
| * command - current command |
| * data - current data |
| * d0, d1, d2, d3 - data fields |
| * call - call SABI using command and data |
| * |
| * This allow to call arbitrary sabi commands wihout |
| * modifying the driver at all. |
| * For example, setting the keyboard backlight brightness to 5 |
| * |
| * echo 0x78 > command |
| * echo 0x0582 > d0 |
| * echo 0 > d1 |
| * echo 0 > d2 |
| * echo 0 > d3 |
| * cat call |
| */ |
| |
| struct samsung_laptop_debug { |
| struct dentry *root; |
| struct sabi_data data; |
| u16 command; |
| |
| struct debugfs_blob_wrapper f0000_wrapper; |
| struct debugfs_blob_wrapper data_wrapper; |
| struct debugfs_blob_wrapper sdiag_wrapper; |
| }; |
| |
| struct samsung_laptop; |
| |
| struct samsung_rfkill { |
| struct samsung_laptop *samsung; |
| struct rfkill *rfkill; |
| enum rfkill_type type; |
| }; |
| |
| struct samsung_laptop { |
| const struct sabi_config *config; |
| |
| void __iomem *sabi; |
| void __iomem *sabi_iface; |
| void __iomem *f0000_segment; |
| |
| struct mutex sabi_mutex; |
| |
| struct platform_device *platform_device; |
| struct backlight_device *backlight_device; |
| |
| struct samsung_rfkill wlan; |
| struct samsung_rfkill bluetooth; |
| |
| struct led_classdev kbd_led; |
| int kbd_led_wk; |
| struct workqueue_struct *led_workqueue; |
| struct work_struct kbd_led_work; |
| |
| struct samsung_laptop_debug debug; |
| struct samsung_quirks *quirks; |
| |
| struct notifier_block pm_nb; |
| |
| bool handle_backlight; |
| bool has_stepping_quirk; |
| |
| char sdiag[64]; |
| }; |
| |
| struct samsung_quirks { |
| bool broken_acpi_video; |
| bool four_kbd_backlight_levels; |
| bool enable_kbd_backlight; |
| bool use_native_backlight; |
| bool lid_handling; |
| }; |
| |
| static struct samsung_quirks samsung_unknown = {}; |
| |
| static struct samsung_quirks samsung_broken_acpi_video = { |
| .broken_acpi_video = true, |
| }; |
| |
| static struct samsung_quirks samsung_use_native_backlight = { |
| .use_native_backlight = true, |
| }; |
| |
| static struct samsung_quirks samsung_np740u3e = { |
| .four_kbd_backlight_levels = true, |
| .enable_kbd_backlight = true, |
| }; |
| |
| static struct samsung_quirks samsung_lid_handling = { |
| .lid_handling = true, |
| }; |
| |
| static bool force; |
| module_param(force, bool, 0); |
| MODULE_PARM_DESC(force, |
| "Disable the DMI check and forces the driver to be loaded"); |
| |
| static bool debug; |
| module_param(debug, bool, S_IRUGO | S_IWUSR); |
| MODULE_PARM_DESC(debug, "Debug enabled or not"); |
| |
| static int sabi_command(struct samsung_laptop *samsung, u16 command, |
| struct sabi_data *in, |
| struct sabi_data *out) |
| { |
| const struct sabi_config *config = samsung->config; |
| int ret = 0; |
| u16 port = readw(samsung->sabi + config->header_offsets.port); |
| u8 complete, iface_data; |
| |
| mutex_lock(&samsung->sabi_mutex); |
| |
| if (debug) { |
| if (in) |
| pr_info("SABI command:0x%04x " |
| "data:{0x%08x, 0x%08x, 0x%04x, 0x%02x}", |
| command, in->d0, in->d1, in->d2, in->d3); |
| else |
| pr_info("SABI command:0x%04x", command); |
| } |
| |
| /* enable memory to be able to write to it */ |
| outb(readb(samsung->sabi + config->header_offsets.en_mem), port); |
| |
| /* write out the command */ |
| writew(config->main_function, samsung->sabi_iface + SABI_IFACE_MAIN); |
| writew(command, samsung->sabi_iface + SABI_IFACE_SUB); |
| writeb(0, samsung->sabi_iface + SABI_IFACE_COMPLETE); |
| if (in) { |
| writel(in->d0, samsung->sabi_iface + SABI_IFACE_DATA); |
| writel(in->d1, samsung->sabi_iface + SABI_IFACE_DATA + 4); |
| writew(in->d2, samsung->sabi_iface + SABI_IFACE_DATA + 8); |
| writeb(in->d3, samsung->sabi_iface + SABI_IFACE_DATA + 10); |
| } |
| outb(readb(samsung->sabi + config->header_offsets.iface_func), port); |
| |
| /* write protect memory to make it safe */ |
| outb(readb(samsung->sabi + config->header_offsets.re_mem), port); |
| |
| /* see if the command actually succeeded */ |
| complete = readb(samsung->sabi_iface + SABI_IFACE_COMPLETE); |
| iface_data = readb(samsung->sabi_iface + SABI_IFACE_DATA); |
| |
| /* iface_data = 0xFF happens when a command is not known |
| * so we only add a warning in debug mode since we will |
| * probably issue some unknown command at startup to find |
| * out which features are supported */ |
| if (complete != 0xaa || (iface_data == 0xff && debug)) |
| pr_warn("SABI command 0x%04x failed with" |
| " completion flag 0x%02x and interface data 0x%02x", |
| command, complete, iface_data); |
| |
| if (complete != 0xaa || iface_data == 0xff) { |
| ret = -EINVAL; |
| goto exit; |
| } |
| |
| if (out) { |
| out->d0 = readl(samsung->sabi_iface + SABI_IFACE_DATA); |
| out->d1 = readl(samsung->sabi_iface + SABI_IFACE_DATA + 4); |
| out->d2 = readw(samsung->sabi_iface + SABI_IFACE_DATA + 2); |
| out->d3 = readb(samsung->sabi_iface + SABI_IFACE_DATA + 1); |
| } |
| |
| if (debug && out) { |
| pr_info("SABI return data:{0x%08x, 0x%08x, 0x%04x, 0x%02x}", |
| out->d0, out->d1, out->d2, out->d3); |
| } |
| |
| exit: |
| mutex_unlock(&samsung->sabi_mutex); |
| return ret; |
| } |
| |
| /* simple wrappers usable with most commands */ |
| static int sabi_set_commandb(struct samsung_laptop *samsung, |
| u16 command, u8 data) |
| { |
| struct sabi_data in = { { { .d0 = 0, .d1 = 0, .d2 = 0, .d3 = 0 } } }; |
| |
| in.data[0] = data; |
| return sabi_command(samsung, command, &in, NULL); |
| } |
| |
| static int read_brightness(struct samsung_laptop *samsung) |
| { |
| const struct sabi_config *config = samsung->config; |
| const struct sabi_commands *commands = &samsung->config->commands; |
| struct sabi_data sretval; |
| int user_brightness = 0; |
| int retval; |
| |
| retval = sabi_command(samsung, commands->get_brightness, |
| NULL, &sretval); |
| if (retval) |
| return retval; |
| |
| user_brightness = sretval.data[0]; |
| if (user_brightness > config->min_brightness) |
| user_brightness -= config->min_brightness; |
| else |
| user_brightness = 0; |
| |
| return user_brightness; |
| } |
| |
| static void set_brightness(struct samsung_laptop *samsung, u8 user_brightness) |
| { |
| const struct sabi_config *config = samsung->config; |
| const struct sabi_commands *commands = &samsung->config->commands; |
| u8 user_level = user_brightness + config->min_brightness; |
| |
| if (samsung->has_stepping_quirk && user_level != 0) { |
| /* |
| * short circuit if the specified level is what's already set |
| * to prevent the screen from flickering needlessly |
| */ |
| if (user_brightness == read_brightness(samsung)) |
| return; |
| |
| sabi_set_commandb(samsung, commands->set_brightness, 0); |
| } |
| |
| sabi_set_commandb(samsung, commands->set_brightness, user_level); |
| } |
| |
| static int get_brightness(struct backlight_device *bd) |
| { |
| struct samsung_laptop *samsung = bl_get_data(bd); |
| |
| return read_brightness(samsung); |
| } |
| |
| static void check_for_stepping_quirk(struct samsung_laptop *samsung) |
| { |
| int initial_level; |
| int check_level; |
| int orig_level = read_brightness(samsung); |
| |
| /* |
| * Some laptops exhibit the strange behaviour of stepping toward |
| * (rather than setting) the brightness except when changing to/from |
| * brightness level 0. This behaviour is checked for here and worked |
| * around in set_brightness. |
| */ |
| |
| if (orig_level == 0) |
| set_brightness(samsung, 1); |
| |
| initial_level = read_brightness(samsung); |
| |
| if (initial_level <= 2) |
| check_level = initial_level + 2; |
| else |
| check_level = initial_level - 2; |
| |
| samsung->has_stepping_quirk = false; |
| set_brightness(samsung, check_level); |
| |
| if (read_brightness(samsung) != check_level) { |
| samsung->has_stepping_quirk = true; |
| pr_info("enabled workaround for brightness stepping quirk\n"); |
| } |
| |
| set_brightness(samsung, orig_level); |
| } |
| |
| static int update_status(struct backlight_device *bd) |
| { |
| struct samsung_laptop *samsung = bl_get_data(bd); |
| const struct sabi_commands *commands = &samsung->config->commands; |
| |
| set_brightness(samsung, bd->props.brightness); |
| |
| if (bd->props.power == FB_BLANK_UNBLANK) |
| sabi_set_commandb(samsung, commands->set_backlight, 1); |
| else |
| sabi_set_commandb(samsung, commands->set_backlight, 0); |
| |
| return 0; |
| } |
| |
| static const struct backlight_ops backlight_ops = { |
| .get_brightness = get_brightness, |
| .update_status = update_status, |
| }; |
| |
| static int seclinux_rfkill_set(void *data, bool blocked) |
| { |
| struct samsung_rfkill *srfkill = data; |
| struct samsung_laptop *samsung = srfkill->samsung; |
| const struct sabi_commands *commands = &samsung->config->commands; |
| |
| return sabi_set_commandb(samsung, commands->set_wireless_button, |
| !blocked); |
| } |
| |
| static const struct rfkill_ops seclinux_rfkill_ops = { |
| .set_block = seclinux_rfkill_set, |
| }; |
| |
| static int swsmi_wireless_status(struct samsung_laptop *samsung, |
| struct sabi_data *data) |
| { |
| const struct sabi_commands *commands = &samsung->config->commands; |
| |
| return sabi_command(samsung, commands->get_wireless_status, |
| NULL, data); |
| } |
| |
| static int swsmi_rfkill_set(void *priv, bool blocked) |
| { |
| struct samsung_rfkill *srfkill = priv; |
| struct samsung_laptop *samsung = srfkill->samsung; |
| const struct sabi_commands *commands = &samsung->config->commands; |
| struct sabi_data data; |
| int ret, i; |
| |
| ret = swsmi_wireless_status(samsung, &data); |
| if (ret) |
| return ret; |
| |
| /* Don't set the state for non-present devices */ |
| for (i = 0; i < 4; i++) |
| if (data.data[i] == 0x02) |
| data.data[1] = 0; |
| |
| if (srfkill->type == RFKILL_TYPE_WLAN) |
| data.data[WL_STATUS_WLAN] = !blocked; |
| else if (srfkill->type == RFKILL_TYPE_BLUETOOTH) |
| data.data[WL_STATUS_BT] = !blocked; |
| |
| return sabi_command(samsung, commands->set_wireless_status, |
| &data, &data); |
| } |
| |
| static void swsmi_rfkill_query(struct rfkill *rfkill, void *priv) |
| { |
| struct samsung_rfkill *srfkill = priv; |
| struct samsung_laptop *samsung = srfkill->samsung; |
| struct sabi_data data; |
| int ret; |
| |
| ret = swsmi_wireless_status(samsung, &data); |
| if (ret) |
| return ; |
| |
| if (srfkill->type == RFKILL_TYPE_WLAN) |
| ret = data.data[WL_STATUS_WLAN]; |
| else if (srfkill->type == RFKILL_TYPE_BLUETOOTH) |
| ret = data.data[WL_STATUS_BT]; |
| else |
| return ; |
| |
| rfkill_set_sw_state(rfkill, !ret); |
| } |
| |
| static const struct rfkill_ops swsmi_rfkill_ops = { |
| .set_block = swsmi_rfkill_set, |
| .query = swsmi_rfkill_query, |
| }; |
| |
| static ssize_t get_performance_level(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct samsung_laptop *samsung = dev_get_drvdata(dev); |
| const struct sabi_config *config = samsung->config; |
| const struct sabi_commands *commands = &config->commands; |
| struct sabi_data sretval; |
| int retval; |
| int i; |
| |
| /* Read the state */ |
| retval = sabi_command(samsung, commands->get_performance_level, |
| NULL, &sretval); |
| if (retval) |
| return retval; |
| |
| /* The logic is backwards, yeah, lots of fun... */ |
| for (i = 0; config->performance_levels[i].name; ++i) { |
| if (sretval.data[0] == config->performance_levels[i].value) |
| return sprintf(buf, "%s\n", config->performance_levels[i].name); |
| } |
| return sprintf(buf, "%s\n", "unknown"); |
| } |
| |
| static ssize_t set_performance_level(struct device *dev, |
| struct device_attribute *attr, const char *buf, |
| size_t count) |
| { |
| struct samsung_laptop *samsung = dev_get_drvdata(dev); |
| const struct sabi_config *config = samsung->config; |
| const struct sabi_commands *commands = &config->commands; |
| int i; |
| |
| if (count < 1) |
| return count; |
| |
| for (i = 0; config->performance_levels[i].name; ++i) { |
| const struct sabi_performance_level *level = |
| &config->performance_levels[i]; |
| if (!strncasecmp(level->name, buf, strlen(level->name))) { |
| sabi_set_commandb(samsung, |
| commands->set_performance_level, |
| level->value); |
| break; |
| } |
| } |
| |
| if (!config->performance_levels[i].name) |
| return -EINVAL; |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR(performance_level, S_IWUSR | S_IRUGO, |
| get_performance_level, set_performance_level); |
| |
| static int read_battery_life_extender(struct samsung_laptop *samsung) |
| { |
| const struct sabi_commands *commands = &samsung->config->commands; |
| struct sabi_data data; |
| int retval; |
| |
| if (commands->get_battery_life_extender == 0xFFFF) |
| return -ENODEV; |
| |
| memset(&data, 0, sizeof(data)); |
| data.data[0] = 0x80; |
| retval = sabi_command(samsung, commands->get_battery_life_extender, |
| &data, &data); |
| |
| if (retval) |
| return retval; |
| |
| if (data.data[0] != 0 && data.data[0] != 1) |
| return -ENODEV; |
| |
| return data.data[0]; |
| } |
| |
| static int write_battery_life_extender(struct samsung_laptop *samsung, |
| int enabled) |
| { |
| const struct sabi_commands *commands = &samsung->config->commands; |
| struct sabi_data data; |
| |
| memset(&data, 0, sizeof(data)); |
| data.data[0] = 0x80 | enabled; |
| return sabi_command(samsung, commands->set_battery_life_extender, |
| &data, NULL); |
| } |
| |
| static ssize_t get_battery_life_extender(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct samsung_laptop *samsung = dev_get_drvdata(dev); |
| int ret; |
| |
| ret = read_battery_life_extender(samsung); |
| if (ret < 0) |
| return ret; |
| |
| return sprintf(buf, "%d\n", ret); |
| } |
| |
| static ssize_t set_battery_life_extender(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct samsung_laptop *samsung = dev_get_drvdata(dev); |
| int ret, value; |
| |
| if (!count || kstrtoint(buf, 0, &value) != 0) |
| return -EINVAL; |
| |
| ret = write_battery_life_extender(samsung, !!value); |
| if (ret < 0) |
| return ret; |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR(battery_life_extender, S_IWUSR | S_IRUGO, |
| get_battery_life_extender, set_battery_life_extender); |
| |
| static int read_usb_charge(struct samsung_laptop *samsung) |
| { |
| const struct sabi_commands *commands = &samsung->config->commands; |
| struct sabi_data data; |
| int retval; |
| |
| if (commands->get_usb_charge == 0xFFFF) |
| return -ENODEV; |
| |
| memset(&data, 0, sizeof(data)); |
| data.data[0] = 0x80; |
| retval = sabi_command(samsung, commands->get_usb_charge, |
| &data, &data); |
| |
| if (retval) |
| return retval; |
| |
| if (data.data[0] != 0 && data.data[0] != 1) |
| return -ENODEV; |
| |
| return data.data[0]; |
| } |
| |
| static int write_usb_charge(struct samsung_laptop *samsung, |
| int enabled) |
| { |
| const struct sabi_commands *commands = &samsung->config->commands; |
| struct sabi_data data; |
| |
| memset(&data, 0, sizeof(data)); |
| data.data[0] = 0x80 | enabled; |
| return sabi_command(samsung, commands->set_usb_charge, |
| &data, NULL); |
| } |
| |
| static ssize_t get_usb_charge(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct samsung_laptop *samsung = dev_get_drvdata(dev); |
| int ret; |
| |
| ret = read_usb_charge(samsung); |
| if (ret < 0) |
| return ret; |
| |
| return sprintf(buf, "%d\n", ret); |
| } |
| |
| static ssize_t set_usb_charge(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct samsung_laptop *samsung = dev_get_drvdata(dev); |
| int ret, value; |
| |
| if (!count || kstrtoint(buf, 0, &value) != 0) |
| return -EINVAL; |
| |
| ret = write_usb_charge(samsung, !!value); |
| if (ret < 0) |
| return ret; |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR(usb_charge, S_IWUSR | S_IRUGO, |
| get_usb_charge, set_usb_charge); |
| |
| static int read_lid_handling(struct samsung_laptop *samsung) |
| { |
| const struct sabi_commands *commands = &samsung->config->commands; |
| struct sabi_data data; |
| int retval; |
| |
| if (commands->get_lid_handling == 0xFFFF) |
| return -ENODEV; |
| |
| memset(&data, 0, sizeof(data)); |
| retval = sabi_command(samsung, commands->get_lid_handling, |
| &data, &data); |
| |
| if (retval) |
| return retval; |
| |
| return data.data[0] & 0x1; |
| } |
| |
| static int write_lid_handling(struct samsung_laptop *samsung, |
| int enabled) |
| { |
| const struct sabi_commands *commands = &samsung->config->commands; |
| struct sabi_data data; |
| |
| memset(&data, 0, sizeof(data)); |
| data.data[0] = 0x80 | enabled; |
| return sabi_command(samsung, commands->set_lid_handling, |
| &data, NULL); |
| } |
| |
| static ssize_t get_lid_handling(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct samsung_laptop *samsung = dev_get_drvdata(dev); |
| int ret; |
| |
| ret = read_lid_handling(samsung); |
| if (ret < 0) |
| return ret; |
| |
| return sprintf(buf, "%d\n", ret); |
| } |
| |
| static ssize_t set_lid_handling(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct samsung_laptop *samsung = dev_get_drvdata(dev); |
| int ret, value; |
| |
| if (!count || kstrtoint(buf, 0, &value) != 0) |
| return -EINVAL; |
| |
| ret = write_lid_handling(samsung, !!value); |
| if (ret < 0) |
| return ret; |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR(lid_handling, S_IWUSR | S_IRUGO, |
| get_lid_handling, set_lid_handling); |
| |
| static struct attribute *platform_attributes[] = { |
| &dev_attr_performance_level.attr, |
| &dev_attr_battery_life_extender.attr, |
| &dev_attr_usb_charge.attr, |
| &dev_attr_lid_handling.attr, |
| NULL |
| }; |
| |
| static int find_signature(void __iomem *memcheck, const char *testStr) |
| { |
| int i = 0; |
| int loca; |
| |
| for (loca = 0; loca < 0xffff; loca++) { |
| char temp = readb(memcheck + loca); |
| |
| if (temp == testStr[i]) { |
| if (i == strlen(testStr)-1) |
| break; |
| ++i; |
| } else { |
| i = 0; |
| } |
| } |
| return loca; |
| } |
| |
| static void samsung_rfkill_exit(struct samsung_laptop *samsung) |
| { |
| if (samsung->wlan.rfkill) { |
| rfkill_unregister(samsung->wlan.rfkill); |
| rfkill_destroy(samsung->wlan.rfkill); |
| samsung->wlan.rfkill = NULL; |
| } |
| if (samsung->bluetooth.rfkill) { |
| rfkill_unregister(samsung->bluetooth.rfkill); |
| rfkill_destroy(samsung->bluetooth.rfkill); |
| samsung->bluetooth.rfkill = NULL; |
| } |
| } |
| |
| static int samsung_new_rfkill(struct samsung_laptop *samsung, |
| struct samsung_rfkill *arfkill, |
| const char *name, enum rfkill_type type, |
| const struct rfkill_ops *ops, |
| int blocked) |
| { |
| struct rfkill **rfkill = &arfkill->rfkill; |
| int ret; |
| |
| arfkill->type = type; |
| arfkill->samsung = samsung; |
| |
| *rfkill = rfkill_alloc(name, &samsung->platform_device->dev, |
| type, ops, arfkill); |
| |
| if (!*rfkill) |
| return -EINVAL; |
| |
| if (blocked != -1) |
| rfkill_init_sw_state(*rfkill, blocked); |
| |
| ret = rfkill_register(*rfkill); |
| if (ret) { |
| rfkill_destroy(*rfkill); |
| *rfkill = NULL; |
| return ret; |
| } |
| return 0; |
| } |
| |
| static int __init samsung_rfkill_init_seclinux(struct samsung_laptop *samsung) |
| { |
| return samsung_new_rfkill(samsung, &samsung->wlan, "samsung-wlan", |
| RFKILL_TYPE_WLAN, &seclinux_rfkill_ops, -1); |
| } |
| |
| static int __init samsung_rfkill_init_swsmi(struct samsung_laptop *samsung) |
| { |
| struct sabi_data data; |
| int ret; |
| |
| ret = swsmi_wireless_status(samsung, &data); |
| if (ret) { |
| /* Some swsmi laptops use the old seclinux way to control |
| * wireless devices */ |
| if (ret == -EINVAL) |
| ret = samsung_rfkill_init_seclinux(samsung); |
| return ret; |
| } |
| |
| /* 0x02 seems to mean that the device is no present/available */ |
| |
| if (data.data[WL_STATUS_WLAN] != 0x02) |
| ret = samsung_new_rfkill(samsung, &samsung->wlan, |
| "samsung-wlan", |
| RFKILL_TYPE_WLAN, |
| &swsmi_rfkill_ops, |
| !data.data[WL_STATUS_WLAN]); |
| if (ret) |
| goto exit; |
| |
| if (data.data[WL_STATUS_BT] != 0x02) |
| ret = samsung_new_rfkill(samsung, &samsung->bluetooth, |
| "samsung-bluetooth", |
| RFKILL_TYPE_BLUETOOTH, |
| &swsmi_rfkill_ops, |
| !data.data[WL_STATUS_BT]); |
| if (ret) |
| goto exit; |
| |
| exit: |
| if (ret) |
| samsung_rfkill_exit(samsung); |
| |
| return ret; |
| } |
| |
| static int __init samsung_rfkill_init(struct samsung_laptop *samsung) |
| { |
| if (samsung->config->sabi_version == 2) |
| return samsung_rfkill_init_seclinux(samsung); |
| if (samsung->config->sabi_version == 3) |
| return samsung_rfkill_init_swsmi(samsung); |
| return 0; |
| } |
| |
| static void samsung_lid_handling_exit(struct samsung_laptop *samsung) |
| { |
| if (samsung->quirks->lid_handling) |
| write_lid_handling(samsung, 0); |
| } |
| |
| static int __init samsung_lid_handling_init(struct samsung_laptop *samsung) |
| { |
| int retval = 0; |
| |
| if (samsung->quirks->lid_handling) |
| retval = write_lid_handling(samsung, 1); |
| |
| return retval; |
| } |
| |
| static int kbd_backlight_enable(struct samsung_laptop *samsung) |
| { |
| const struct sabi_commands *commands = &samsung->config->commands; |
| struct sabi_data data; |
| int retval; |
| |
| if (commands->kbd_backlight == 0xFFFF) |
| return -ENODEV; |
| |
| memset(&data, 0, sizeof(data)); |
| data.d0 = 0xaabb; |
| retval = sabi_command(samsung, commands->kbd_backlight, |
| &data, &data); |
| |
| if (retval) |
| return retval; |
| |
| if (data.d0 != 0xccdd) |
| return -ENODEV; |
| return 0; |
| } |
| |
| static int kbd_backlight_read(struct samsung_laptop *samsung) |
| { |
| const struct sabi_commands *commands = &samsung->config->commands; |
| struct sabi_data data; |
| int retval; |
| |
| memset(&data, 0, sizeof(data)); |
| data.data[0] = 0x81; |
| retval = sabi_command(samsung, commands->kbd_backlight, |
| &data, &data); |
| |
| if (retval) |
| return retval; |
| |
| return data.data[0]; |
| } |
| |
| static int kbd_backlight_write(struct samsung_laptop *samsung, int brightness) |
| { |
| const struct sabi_commands *commands = &samsung->config->commands; |
| struct sabi_data data; |
| |
| memset(&data, 0, sizeof(data)); |
| data.d0 = 0x82 | ((brightness & 0xFF) << 8); |
| return sabi_command(samsung, commands->kbd_backlight, |
| &data, NULL); |
| } |
| |
| static void kbd_led_update(struct work_struct *work) |
| { |
| struct samsung_laptop *samsung; |
| |
| samsung = container_of(work, struct samsung_laptop, kbd_led_work); |
| kbd_backlight_write(samsung, samsung->kbd_led_wk); |
| } |
| |
| static void kbd_led_set(struct led_classdev *led_cdev, |
| enum led_brightness value) |
| { |
| struct samsung_laptop *samsung; |
| |
| samsung = container_of(led_cdev, struct samsung_laptop, kbd_led); |
| |
| if (value > samsung->kbd_led.max_brightness) |
| value = samsung->kbd_led.max_brightness; |
| else if (value < 0) |
| value = 0; |
| |
| samsung->kbd_led_wk = value; |
| queue_work(samsung->led_workqueue, &samsung->kbd_led_work); |
| } |
| |
| static enum led_brightness kbd_led_get(struct led_classdev *led_cdev) |
| { |
| struct samsung_laptop *samsung; |
| |
| samsung = container_of(led_cdev, struct samsung_laptop, kbd_led); |
| return kbd_backlight_read(samsung); |
| } |
| |
| static void samsung_leds_exit(struct samsung_laptop *samsung) |
| { |
| if (!IS_ERR_OR_NULL(samsung->kbd_led.dev)) |
| led_classdev_unregister(&samsung->kbd_led); |
| if (samsung->led_workqueue) |
| destroy_workqueue(samsung->led_workqueue); |
| } |
| |
| static int __init samsung_leds_init(struct samsung_laptop *samsung) |
| { |
| int ret = 0; |
| |
| samsung->led_workqueue = create_singlethread_workqueue("led_workqueue"); |
| if (!samsung->led_workqueue) |
| return -ENOMEM; |
| |
| if (kbd_backlight_enable(samsung) >= 0) { |
| INIT_WORK(&samsung->kbd_led_work, kbd_led_update); |
| |
| samsung->kbd_led.name = "samsung::kbd_backlight"; |
| samsung->kbd_led.brightness_set = kbd_led_set; |
| samsung->kbd_led.brightness_get = kbd_led_get; |
| samsung->kbd_led.max_brightness = 8; |
| if (samsung->quirks->four_kbd_backlight_levels) |
| samsung->kbd_led.max_brightness = 4; |
| |
| ret = led_classdev_register(&samsung->platform_device->dev, |
| &samsung->kbd_led); |
| } |
| |
| if (ret) |
| samsung_leds_exit(samsung); |
| |
| return ret; |
| } |
| |
| static void samsung_backlight_exit(struct samsung_laptop *samsung) |
| { |
| if (samsung->backlight_device) { |
| backlight_device_unregister(samsung->backlight_device); |
| samsung->backlight_device = NULL; |
| } |
| } |
| |
| static int __init samsung_backlight_init(struct samsung_laptop *samsung) |
| { |
| struct backlight_device *bd; |
| struct backlight_properties props; |
| |
| if (!samsung->handle_backlight) |
| return 0; |
| |
| memset(&props, 0, sizeof(struct backlight_properties)); |
| props.type = BACKLIGHT_PLATFORM; |
| props.max_brightness = samsung->config->max_brightness - |
| samsung->config->min_brightness; |
| |
| bd = backlight_device_register("samsung", |
| &samsung->platform_device->dev, |
| samsung, &backlight_ops, |
| &props); |
| if (IS_ERR(bd)) |
| return PTR_ERR(bd); |
| |
| samsung->backlight_device = bd; |
| samsung->backlight_device->props.brightness = read_brightness(samsung); |
| samsung->backlight_device->props.power = FB_BLANK_UNBLANK; |
| backlight_update_status(samsung->backlight_device); |
| |
| return 0; |
| } |
| |
| static umode_t samsung_sysfs_is_visible(struct kobject *kobj, |
| struct attribute *attr, int idx) |
| { |
| struct device *dev = container_of(kobj, struct device, kobj); |
| struct platform_device *pdev = to_platform_device(dev); |
| struct samsung_laptop *samsung = platform_get_drvdata(pdev); |
| bool ok = true; |
| |
| if (attr == &dev_attr_performance_level.attr) |
| ok = !!samsung->config->performance_levels[0].name; |
| if (attr == &dev_attr_battery_life_extender.attr) |
| ok = !!(read_battery_life_extender(samsung) >= 0); |
| if (attr == &dev_attr_usb_charge.attr) |
| ok = !!(read_usb_charge(samsung) >= 0); |
| if (attr == &dev_attr_lid_handling.attr) |
| ok = !!(read_lid_handling(samsung) >= 0); |
| |
| return ok ? attr->mode : 0; |
| } |
| |
| static const struct attribute_group platform_attribute_group = { |
| .is_visible = samsung_sysfs_is_visible, |
| .attrs = platform_attributes |
| }; |
| |
| static void samsung_sysfs_exit(struct samsung_laptop *samsung) |
| { |
| struct platform_device *device = samsung->platform_device; |
| |
| sysfs_remove_group(&device->dev.kobj, &platform_attribute_group); |
| } |
| |
| static int __init samsung_sysfs_init(struct samsung_laptop *samsung) |
| { |
| struct platform_device *device = samsung->platform_device; |
| |
| return sysfs_create_group(&device->dev.kobj, &platform_attribute_group); |
| |
| } |
| |
| static int show_call(struct seq_file *m, void *data) |
| { |
| struct samsung_laptop *samsung = m->private; |
| struct sabi_data *sdata = &samsung->debug.data; |
| int ret; |
| |
| seq_printf(m, "SABI 0x%04x {0x%08x, 0x%08x, 0x%04x, 0x%02x}\n", |
| samsung->debug.command, |
| sdata->d0, sdata->d1, sdata->d2, sdata->d3); |
| |
| ret = sabi_command(samsung, samsung->debug.command, sdata, sdata); |
| |
| if (ret) { |
| seq_printf(m, "SABI command 0x%04x failed\n", |
| samsung->debug.command); |
| return ret; |
| } |
| |
| seq_printf(m, "SABI {0x%08x, 0x%08x, 0x%04x, 0x%02x}\n", |
| sdata->d0, sdata->d1, sdata->d2, sdata->d3); |
| return 0; |
| } |
| |
| static int samsung_debugfs_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, show_call, inode->i_private); |
| } |
| |
| static const struct file_operations samsung_laptop_call_io_ops = { |
| .owner = THIS_MODULE, |
| .open = samsung_debugfs_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static void samsung_debugfs_exit(struct samsung_laptop *samsung) |
| { |
| debugfs_remove_recursive(samsung->debug.root); |
| } |
| |
| static int samsung_debugfs_init(struct samsung_laptop *samsung) |
| { |
| struct dentry *dent; |
| |
| samsung->debug.root = debugfs_create_dir("samsung-laptop", NULL); |
| if (!samsung->debug.root) { |
| pr_err("failed to create debugfs directory"); |
| goto error_debugfs; |
| } |
| |
| samsung->debug.f0000_wrapper.data = samsung->f0000_segment; |
| samsung->debug.f0000_wrapper.size = 0xffff; |
| |
| samsung->debug.data_wrapper.data = &samsung->debug.data; |
| samsung->debug.data_wrapper.size = sizeof(samsung->debug.data); |
| |
| samsung->debug.sdiag_wrapper.data = samsung->sdiag; |
| samsung->debug.sdiag_wrapper.size = strlen(samsung->sdiag); |
| |
| dent = debugfs_create_u16("command", S_IRUGO | S_IWUSR, |
| samsung->debug.root, &samsung->debug.command); |
| if (!dent) |
| goto error_debugfs; |
| |
| dent = debugfs_create_u32("d0", S_IRUGO | S_IWUSR, samsung->debug.root, |
| &samsung->debug.data.d0); |
| if (!dent) |
| goto error_debugfs; |
| |
| dent = debugfs_create_u32("d1", S_IRUGO | S_IWUSR, samsung->debug.root, |
| &samsung->debug.data.d1); |
| if (!dent) |
| goto error_debugfs; |
| |
| dent = debugfs_create_u16("d2", S_IRUGO | S_IWUSR, samsung->debug.root, |
| &samsung->debug.data.d2); |
| if (!dent) |
| goto error_debugfs; |
| |
| dent = debugfs_create_u8("d3", S_IRUGO | S_IWUSR, samsung->debug.root, |
| &samsung->debug.data.d3); |
| if (!dent) |
| goto error_debugfs; |
| |
| dent = debugfs_create_blob("data", S_IRUGO | S_IWUSR, |
| samsung->debug.root, |
| &samsung->debug.data_wrapper); |
| if (!dent) |
| goto error_debugfs; |
| |
| dent = debugfs_create_blob("f0000_segment", S_IRUSR | S_IWUSR, |
| samsung->debug.root, |
| &samsung->debug.f0000_wrapper); |
| if (!dent) |
| goto error_debugfs; |
| |
| dent = debugfs_create_file("call", S_IFREG | S_IRUGO, |
| samsung->debug.root, samsung, |
| &samsung_laptop_call_io_ops); |
| if (!dent) |
| goto error_debugfs; |
| |
| dent = debugfs_create_blob("sdiag", S_IRUGO | S_IWUSR, |
| samsung->debug.root, |
| &samsung->debug.sdiag_wrapper); |
| if (!dent) |
| goto error_debugfs; |
| |
| return 0; |
| |
| error_debugfs: |
| samsung_debugfs_exit(samsung); |
| return -ENOMEM; |
| } |
| |
| static void samsung_sabi_exit(struct samsung_laptop *samsung) |
| { |
| const struct sabi_config *config = samsung->config; |
| |
| /* Turn off "Linux" mode in the BIOS */ |
| if (config && config->commands.set_linux != 0xff) |
| sabi_set_commandb(samsung, config->commands.set_linux, 0x80); |
| |
| if (samsung->sabi_iface) { |
| iounmap(samsung->sabi_iface); |
| samsung->sabi_iface = NULL; |
| } |
| if (samsung->f0000_segment) { |
| iounmap(samsung->f0000_segment); |
| samsung->f0000_segment = NULL; |
| } |
| |
| samsung->config = NULL; |
| } |
| |
| static __init void samsung_sabi_infos(struct samsung_laptop *samsung, int loca, |
| unsigned int ifaceP) |
| { |
| const struct sabi_config *config = samsung->config; |
| |
| printk(KERN_DEBUG "This computer supports SABI==%x\n", |
| loca + 0xf0000 - 6); |
| |
| printk(KERN_DEBUG "SABI header:\n"); |
| printk(KERN_DEBUG " SMI Port Number = 0x%04x\n", |
| readw(samsung->sabi + config->header_offsets.port)); |
| printk(KERN_DEBUG " SMI Interface Function = 0x%02x\n", |
| readb(samsung->sabi + config->header_offsets.iface_func)); |
| printk(KERN_DEBUG " SMI enable memory buffer = 0x%02x\n", |
| readb(samsung->sabi + config->header_offsets.en_mem)); |
| printk(KERN_DEBUG " SMI restore memory buffer = 0x%02x\n", |
| readb(samsung->sabi + config->header_offsets.re_mem)); |
| printk(KERN_DEBUG " SABI data offset = 0x%04x\n", |
| readw(samsung->sabi + config->header_offsets.data_offset)); |
| printk(KERN_DEBUG " SABI data segment = 0x%04x\n", |
| readw(samsung->sabi + config->header_offsets.data_segment)); |
| |
| printk(KERN_DEBUG " SABI pointer = 0x%08x\n", ifaceP); |
| } |
| |
| static void __init samsung_sabi_diag(struct samsung_laptop *samsung) |
| { |
| int loca = find_signature(samsung->f0000_segment, "SDiaG@"); |
| int i; |
| |
| if (loca == 0xffff) |
| return ; |
| |
| /* Example: |
| * Ident: @SDiaG@686XX-N90X3A/966-SEC-07HL-S90X3A |
| * |
| * Product name: 90X3A |
| * BIOS Version: 07HL |
| */ |
| loca += 1; |
| for (i = 0; loca < 0xffff && i < sizeof(samsung->sdiag) - 1; loca++) { |
| char temp = readb(samsung->f0000_segment + loca); |
| |
| if (isalnum(temp) || temp == '/' || temp == '-') |
| samsung->sdiag[i++] = temp; |
| else |
| break ; |
| } |
| |
| if (debug && samsung->sdiag[0]) |
| pr_info("sdiag: %s", samsung->sdiag); |
| } |
| |
| static int __init samsung_sabi_init(struct samsung_laptop *samsung) |
| { |
| const struct sabi_config *config = NULL; |
| const struct sabi_commands *commands; |
| unsigned int ifaceP; |
| int loca = 0xffff; |
| int ret = 0; |
| int i; |
| |
| samsung->f0000_segment = ioremap_nocache(0xf0000, 0xffff); |
| if (!samsung->f0000_segment) { |
| if (debug || force) |
| pr_err("Can't map the segment at 0xf0000\n"); |
| ret = -EINVAL; |
| goto exit; |
| } |
| |
| samsung_sabi_diag(samsung); |
| |
| /* Try to find one of the signatures in memory to find the header */ |
| for (i = 0; sabi_configs[i].test_string != NULL; ++i) { |
| samsung->config = &sabi_configs[i]; |
| loca = find_signature(samsung->f0000_segment, |
| samsung->config->test_string); |
| if (loca != 0xffff) |
| break; |
| } |
| |
| if (loca == 0xffff) { |
| if (debug || force) |
| pr_err("This computer does not support SABI\n"); |
| ret = -ENODEV; |
| goto exit; |
| } |
| |
| config = samsung->config; |
| commands = &config->commands; |
| |
| /* point to the SMI port Number */ |
| loca += 1; |
| samsung->sabi = (samsung->f0000_segment + loca); |
| |
| /* Get a pointer to the SABI Interface */ |
| ifaceP = (readw(samsung->sabi + config->header_offsets.data_segment) & 0x0ffff) << 4; |
| ifaceP += readw(samsung->sabi + config->header_offsets.data_offset) & 0x0ffff; |
| |
| if (debug) |
| samsung_sabi_infos(samsung, loca, ifaceP); |
| |
| samsung->sabi_iface = ioremap_nocache(ifaceP, 16); |
| if (!samsung->sabi_iface) { |
| pr_err("Can't remap %x\n", ifaceP); |
| ret = -EINVAL; |
| goto exit; |
| } |
| |
| /* Turn on "Linux" mode in the BIOS */ |
| if (commands->set_linux != 0xff) { |
| int retval = sabi_set_commandb(samsung, |
| commands->set_linux, 0x81); |
| if (retval) { |
| pr_warn("Linux mode was not set!\n"); |
| ret = -ENODEV; |
| goto exit; |
| } |
| } |
| |
| /* Check for stepping quirk */ |
| if (samsung->handle_backlight) |
| check_for_stepping_quirk(samsung); |
| |
| pr_info("detected SABI interface: %s\n", |
| samsung->config->test_string); |
| |
| exit: |
| if (ret) |
| samsung_sabi_exit(samsung); |
| |
| return ret; |
| } |
| |
| static void samsung_platform_exit(struct samsung_laptop *samsung) |
| { |
| if (samsung->platform_device) { |
| platform_device_unregister(samsung->platform_device); |
| samsung->platform_device = NULL; |
| } |
| } |
| |
| static int samsung_pm_notification(struct notifier_block *nb, |
| unsigned long val, void *ptr) |
| { |
| struct samsung_laptop *samsung; |
| |
| samsung = container_of(nb, struct samsung_laptop, pm_nb); |
| if (val == PM_POST_HIBERNATION && |
| samsung->quirks->enable_kbd_backlight) |
| kbd_backlight_enable(samsung); |
| |
| if (val == PM_POST_HIBERNATION && samsung->quirks->lid_handling) |
| write_lid_handling(samsung, 1); |
| |
| return 0; |
| } |
| |
| static int __init samsung_platform_init(struct samsung_laptop *samsung) |
| { |
| struct platform_device *pdev; |
| |
| pdev = platform_device_register_simple("samsung", -1, NULL, 0); |
| if (IS_ERR(pdev)) |
| return PTR_ERR(pdev); |
| |
| samsung->platform_device = pdev; |
| platform_set_drvdata(samsung->platform_device, samsung); |
| return 0; |
| } |
| |
| static struct samsung_quirks *quirks; |
| |
| static int __init samsung_dmi_matched(const struct dmi_system_id *d) |
| { |
| quirks = d->driver_data; |
| return 0; |
| } |
| |
| static struct dmi_system_id __initdata samsung_dmi_table[] = { |
| { |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, |
| "SAMSUNG ELECTRONICS CO., LTD."), |
| DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */ |
| }, |
| }, |
| { |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, |
| "SAMSUNG ELECTRONICS CO., LTD."), |
| DMI_MATCH(DMI_CHASSIS_TYPE, "9"), /* Laptop */ |
| }, |
| }, |
| { |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, |
| "SAMSUNG ELECTRONICS CO., LTD."), |
| DMI_MATCH(DMI_CHASSIS_TYPE, "10"), /* Notebook */ |
| }, |
| }, |
| { |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, |
| "SAMSUNG ELECTRONICS CO., LTD."), |
| DMI_MATCH(DMI_CHASSIS_TYPE, "14"), /* Sub-Notebook */ |
| }, |
| }, |
| /* DMI ids for laptops with bad Chassis Type */ |
| { |
| .ident = "R40/R41", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "R40/R41"), |
| DMI_MATCH(DMI_BOARD_NAME, "R40/R41"), |
| }, |
| }, |
| /* Specific DMI ids for laptop with quirks */ |
| { |
| .callback = samsung_dmi_matched, |
| .ident = "N150P", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "N150P"), |
| DMI_MATCH(DMI_BOARD_NAME, "N150P"), |
| }, |
| .driver_data = &samsung_use_native_backlight, |
| }, |
| { |
| .callback = samsung_dmi_matched, |
| .ident = "N145P/N250P/N260P", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "N145P/N250P/N260P"), |
| DMI_MATCH(DMI_BOARD_NAME, "N145P/N250P/N260P"), |
| }, |
| .driver_data = &samsung_use_native_backlight, |
| }, |
| { |
| .callback = samsung_dmi_matched, |
| .ident = "N150/N210/N220", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "N150/N210/N220"), |
| DMI_MATCH(DMI_BOARD_NAME, "N150/N210/N220"), |
| }, |
| .driver_data = &samsung_broken_acpi_video, |
| }, |
| { |
| .callback = samsung_dmi_matched, |
| .ident = "NF110/NF210/NF310", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "NF110/NF210/NF310"), |
| DMI_MATCH(DMI_BOARD_NAME, "NF110/NF210/NF310"), |
| }, |
| .driver_data = &samsung_broken_acpi_video, |
| }, |
| { |
| .callback = samsung_dmi_matched, |
| .ident = "X360", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "X360"), |
| DMI_MATCH(DMI_BOARD_NAME, "X360"), |
| }, |
| .driver_data = &samsung_broken_acpi_video, |
| }, |
| { |
| .callback = samsung_dmi_matched, |
| .ident = "N250P", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "N250P"), |
| DMI_MATCH(DMI_BOARD_NAME, "N250P"), |
| }, |
| .driver_data = &samsung_use_native_backlight, |
| }, |
| { |
| .callback = samsung_dmi_matched, |
| .ident = "NC210", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "NC210/NC110"), |
| DMI_MATCH(DMI_BOARD_NAME, "NC210/NC110"), |
| }, |
| .driver_data = &samsung_broken_acpi_video, |
| }, |
| { |
| .callback = samsung_dmi_matched, |
| .ident = "730U3E/740U3E", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "730U3E/740U3E"), |
| }, |
| .driver_data = &samsung_np740u3e, |
| }, |
| { |
| .callback = samsung_dmi_matched, |
| .ident = "300V3Z/300V4Z/300V5Z", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "300V3Z/300V4Z/300V5Z"), |
| }, |
| .driver_data = &samsung_lid_handling, |
| }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(dmi, samsung_dmi_table); |
| |
| static struct platform_device *samsung_platform_device; |
| |
| static int __init samsung_init(void) |
| { |
| struct samsung_laptop *samsung; |
| int ret; |
| |
| if (efi_enabled(EFI_BOOT)) |
| return -ENODEV; |
| |
| quirks = &samsung_unknown; |
| if (!force && !dmi_check_system(samsung_dmi_table)) |
| return -ENODEV; |
| |
| samsung = kzalloc(sizeof(*samsung), GFP_KERNEL); |
| if (!samsung) |
| return -ENOMEM; |
| |
| mutex_init(&samsung->sabi_mutex); |
| samsung->handle_backlight = true; |
| samsung->quirks = quirks; |
| |
| #ifdef CONFIG_ACPI |
| if (samsung->quirks->broken_acpi_video) |
| acpi_video_set_dmi_backlight_type(acpi_backlight_vendor); |
| if (samsung->quirks->use_native_backlight) |
| acpi_video_set_dmi_backlight_type(acpi_backlight_native); |
| |
| if (acpi_video_get_backlight_type() != acpi_backlight_vendor) |
| samsung->handle_backlight = false; |
| #endif |
| |
| ret = samsung_platform_init(samsung); |
| if (ret) |
| goto error_platform; |
| |
| ret = samsung_sabi_init(samsung); |
| if (ret) |
| goto error_sabi; |
| |
| ret = samsung_sysfs_init(samsung); |
| if (ret) |
| goto error_sysfs; |
| |
| ret = samsung_backlight_init(samsung); |
| if (ret) |
| goto error_backlight; |
| |
| ret = samsung_rfkill_init(samsung); |
| if (ret) |
| goto error_rfkill; |
| |
| ret = samsung_leds_init(samsung); |
| if (ret) |
| goto error_leds; |
| |
| ret = samsung_lid_handling_init(samsung); |
| if (ret) |
| goto error_lid_handling; |
| |
| ret = samsung_debugfs_init(samsung); |
| if (ret) |
| goto error_debugfs; |
| |
| samsung->pm_nb.notifier_call = samsung_pm_notification; |
| register_pm_notifier(&samsung->pm_nb); |
| |
| samsung_platform_device = samsung->platform_device; |
| return ret; |
| |
| error_debugfs: |
| samsung_lid_handling_exit(samsung); |
| error_lid_handling: |
| samsung_leds_exit(samsung); |
| error_leds: |
| samsung_rfkill_exit(samsung); |
| error_rfkill: |
| samsung_backlight_exit(samsung); |
| error_backlight: |
| samsung_sysfs_exit(samsung); |
| error_sysfs: |
| samsung_sabi_exit(samsung); |
| error_sabi: |
| samsung_platform_exit(samsung); |
| error_platform: |
| kfree(samsung); |
| return ret; |
| } |
| |
| static void __exit samsung_exit(void) |
| { |
| struct samsung_laptop *samsung; |
| |
| samsung = platform_get_drvdata(samsung_platform_device); |
| unregister_pm_notifier(&samsung->pm_nb); |
| |
| samsung_debugfs_exit(samsung); |
| samsung_lid_handling_exit(samsung); |
| samsung_leds_exit(samsung); |
| samsung_rfkill_exit(samsung); |
| samsung_backlight_exit(samsung); |
| samsung_sysfs_exit(samsung); |
| samsung_sabi_exit(samsung); |
| samsung_platform_exit(samsung); |
| |
| kfree(samsung); |
| samsung_platform_device = NULL; |
| } |
| |
| module_init(samsung_init); |
| module_exit(samsung_exit); |
| |
| MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@suse.de>"); |
| MODULE_DESCRIPTION("Samsung Backlight driver"); |
| MODULE_LICENSE("GPL"); |