| /* |
| * Copyright © 2009 |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| * |
| * Authors: |
| * Daniel Vetter <daniel@ffwll.ch> |
| * |
| * Derived from Xorg ddx, xf86-video-intel, src/i830_video.c |
| */ |
| #include <drm/drmP.h> |
| #include <drm/i915_drm.h> |
| #include "i915_drv.h" |
| #include "i915_reg.h" |
| #include "intel_drv.h" |
| |
| /* Limits for overlay size. According to intel doc, the real limits are: |
| * Y width: 4095, UV width (planar): 2047, Y height: 2047, |
| * UV width (planar): * 1023. But the xorg thinks 2048 for height and width. Use |
| * the mininum of both. */ |
| #define IMAGE_MAX_WIDTH 2048 |
| #define IMAGE_MAX_HEIGHT 2046 /* 2 * 1023 */ |
| /* on 830 and 845 these large limits result in the card hanging */ |
| #define IMAGE_MAX_WIDTH_LEGACY 1024 |
| #define IMAGE_MAX_HEIGHT_LEGACY 1088 |
| |
| /* overlay register definitions */ |
| /* OCMD register */ |
| #define OCMD_TILED_SURFACE (0x1<<19) |
| #define OCMD_MIRROR_MASK (0x3<<17) |
| #define OCMD_MIRROR_MODE (0x3<<17) |
| #define OCMD_MIRROR_HORIZONTAL (0x1<<17) |
| #define OCMD_MIRROR_VERTICAL (0x2<<17) |
| #define OCMD_MIRROR_BOTH (0x3<<17) |
| #define OCMD_BYTEORDER_MASK (0x3<<14) /* zero for YUYV or FOURCC YUY2 */ |
| #define OCMD_UV_SWAP (0x1<<14) /* YVYU */ |
| #define OCMD_Y_SWAP (0x2<<14) /* UYVY or FOURCC UYVY */ |
| #define OCMD_Y_AND_UV_SWAP (0x3<<14) /* VYUY */ |
| #define OCMD_SOURCE_FORMAT_MASK (0xf<<10) |
| #define OCMD_RGB_888 (0x1<<10) /* not in i965 Intel docs */ |
| #define OCMD_RGB_555 (0x2<<10) /* not in i965 Intel docs */ |
| #define OCMD_RGB_565 (0x3<<10) /* not in i965 Intel docs */ |
| #define OCMD_YUV_422_PACKED (0x8<<10) |
| #define OCMD_YUV_411_PACKED (0x9<<10) /* not in i965 Intel docs */ |
| #define OCMD_YUV_420_PLANAR (0xc<<10) |
| #define OCMD_YUV_422_PLANAR (0xd<<10) |
| #define OCMD_YUV_410_PLANAR (0xe<<10) /* also 411 */ |
| #define OCMD_TVSYNCFLIP_PARITY (0x1<<9) |
| #define OCMD_TVSYNCFLIP_ENABLE (0x1<<7) |
| #define OCMD_BUF_TYPE_MASK (0x1<<5) |
| #define OCMD_BUF_TYPE_FRAME (0x0<<5) |
| #define OCMD_BUF_TYPE_FIELD (0x1<<5) |
| #define OCMD_TEST_MODE (0x1<<4) |
| #define OCMD_BUFFER_SELECT (0x3<<2) |
| #define OCMD_BUFFER0 (0x0<<2) |
| #define OCMD_BUFFER1 (0x1<<2) |
| #define OCMD_FIELD_SELECT (0x1<<2) |
| #define OCMD_FIELD0 (0x0<<1) |
| #define OCMD_FIELD1 (0x1<<1) |
| #define OCMD_ENABLE (0x1<<0) |
| |
| /* OCONFIG register */ |
| #define OCONF_PIPE_MASK (0x1<<18) |
| #define OCONF_PIPE_A (0x0<<18) |
| #define OCONF_PIPE_B (0x1<<18) |
| #define OCONF_GAMMA2_ENABLE (0x1<<16) |
| #define OCONF_CSC_MODE_BT601 (0x0<<5) |
| #define OCONF_CSC_MODE_BT709 (0x1<<5) |
| #define OCONF_CSC_BYPASS (0x1<<4) |
| #define OCONF_CC_OUT_8BIT (0x1<<3) |
| #define OCONF_TEST_MODE (0x1<<2) |
| #define OCONF_THREE_LINE_BUFFER (0x1<<0) |
| #define OCONF_TWO_LINE_BUFFER (0x0<<0) |
| |
| /* DCLRKM (dst-key) register */ |
| #define DST_KEY_ENABLE (0x1<<31) |
| #define CLK_RGB24_MASK 0x0 |
| #define CLK_RGB16_MASK 0x070307 |
| #define CLK_RGB15_MASK 0x070707 |
| #define CLK_RGB8I_MASK 0xffffff |
| |
| #define RGB16_TO_COLORKEY(c) \ |
| (((c & 0xF800) << 8) | ((c & 0x07E0) << 5) | ((c & 0x001F) << 3)) |
| #define RGB15_TO_COLORKEY(c) \ |
| (((c & 0x7c00) << 9) | ((c & 0x03E0) << 6) | ((c & 0x001F) << 3)) |
| |
| /* overlay flip addr flag */ |
| #define OFC_UPDATE 0x1 |
| |
| /* polyphase filter coefficients */ |
| #define N_HORIZ_Y_TAPS 5 |
| #define N_VERT_Y_TAPS 3 |
| #define N_HORIZ_UV_TAPS 3 |
| #define N_VERT_UV_TAPS 3 |
| #define N_PHASES 17 |
| #define MAX_TAPS 5 |
| |
| /* memory bufferd overlay registers */ |
| struct overlay_registers { |
| u32 OBUF_0Y; |
| u32 OBUF_1Y; |
| u32 OBUF_0U; |
| u32 OBUF_0V; |
| u32 OBUF_1U; |
| u32 OBUF_1V; |
| u32 OSTRIDE; |
| u32 YRGB_VPH; |
| u32 UV_VPH; |
| u32 HORZ_PH; |
| u32 INIT_PHS; |
| u32 DWINPOS; |
| u32 DWINSZ; |
| u32 SWIDTH; |
| u32 SWIDTHSW; |
| u32 SHEIGHT; |
| u32 YRGBSCALE; |
| u32 UVSCALE; |
| u32 OCLRC0; |
| u32 OCLRC1; |
| u32 DCLRKV; |
| u32 DCLRKM; |
| u32 SCLRKVH; |
| u32 SCLRKVL; |
| u32 SCLRKEN; |
| u32 OCONFIG; |
| u32 OCMD; |
| u32 RESERVED1; /* 0x6C */ |
| u32 OSTART_0Y; |
| u32 OSTART_1Y; |
| u32 OSTART_0U; |
| u32 OSTART_0V; |
| u32 OSTART_1U; |
| u32 OSTART_1V; |
| u32 OTILEOFF_0Y; |
| u32 OTILEOFF_1Y; |
| u32 OTILEOFF_0U; |
| u32 OTILEOFF_0V; |
| u32 OTILEOFF_1U; |
| u32 OTILEOFF_1V; |
| u32 FASTHSCALE; /* 0xA0 */ |
| u32 UVSCALEV; /* 0xA4 */ |
| u32 RESERVEDC[(0x200 - 0xA8) / 4]; /* 0xA8 - 0x1FC */ |
| u16 Y_VCOEFS[N_VERT_Y_TAPS * N_PHASES]; /* 0x200 */ |
| u16 RESERVEDD[0x100 / 2 - N_VERT_Y_TAPS * N_PHASES]; |
| u16 Y_HCOEFS[N_HORIZ_Y_TAPS * N_PHASES]; /* 0x300 */ |
| u16 RESERVEDE[0x200 / 2 - N_HORIZ_Y_TAPS * N_PHASES]; |
| u16 UV_VCOEFS[N_VERT_UV_TAPS * N_PHASES]; /* 0x500 */ |
| u16 RESERVEDF[0x100 / 2 - N_VERT_UV_TAPS * N_PHASES]; |
| u16 UV_HCOEFS[N_HORIZ_UV_TAPS * N_PHASES]; /* 0x600 */ |
| u16 RESERVEDG[0x100 / 2 - N_HORIZ_UV_TAPS * N_PHASES]; |
| }; |
| |
| struct intel_overlay { |
| struct drm_device *dev; |
| struct intel_crtc *crtc; |
| struct drm_i915_gem_object *vid_bo; |
| struct drm_i915_gem_object *old_vid_bo; |
| int active; |
| int pfit_active; |
| u32 pfit_vscale_ratio; /* shifted-point number, (1<<12) == 1.0 */ |
| u32 color_key; |
| u32 brightness, contrast, saturation; |
| u32 old_xscale, old_yscale; |
| /* register access */ |
| u32 flip_addr; |
| struct drm_i915_gem_object *reg_bo; |
| /* flip handling */ |
| struct drm_i915_gem_request *last_flip_req; |
| void (*flip_tail)(struct intel_overlay *); |
| }; |
| |
| static struct overlay_registers __iomem * |
| intel_overlay_map_regs(struct intel_overlay *overlay) |
| { |
| struct drm_i915_private *dev_priv = overlay->dev->dev_private; |
| struct overlay_registers __iomem *regs; |
| |
| if (OVERLAY_NEEDS_PHYSICAL(overlay->dev)) |
| regs = (struct overlay_registers __iomem *)overlay->reg_bo->phys_handle->vaddr; |
| else |
| regs = io_mapping_map_wc(dev_priv->gtt.mappable, |
| i915_gem_obj_ggtt_offset(overlay->reg_bo)); |
| |
| return regs; |
| } |
| |
| static void intel_overlay_unmap_regs(struct intel_overlay *overlay, |
| struct overlay_registers __iomem *regs) |
| { |
| if (!OVERLAY_NEEDS_PHYSICAL(overlay->dev)) |
| io_mapping_unmap(regs); |
| } |
| |
| static int intel_overlay_do_wait_request(struct intel_overlay *overlay, |
| void (*tail)(struct intel_overlay *)) |
| { |
| struct drm_device *dev = overlay->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_engine_cs *ring = &dev_priv->ring[RCS]; |
| int ret; |
| |
| BUG_ON(overlay->last_flip_req); |
| i915_gem_request_assign(&overlay->last_flip_req, |
| ring->outstanding_lazy_request); |
| ret = i915_add_request(ring); |
| if (ret) |
| return ret; |
| |
| overlay->flip_tail = tail; |
| ret = i915_wait_request(overlay->last_flip_req); |
| if (ret) |
| return ret; |
| i915_gem_retire_requests(dev); |
| |
| i915_gem_request_assign(&overlay->last_flip_req, NULL); |
| return 0; |
| } |
| |
| /* overlay needs to be disable in OCMD reg */ |
| static int intel_overlay_on(struct intel_overlay *overlay) |
| { |
| struct drm_device *dev = overlay->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_engine_cs *ring = &dev_priv->ring[RCS]; |
| int ret; |
| |
| BUG_ON(overlay->active); |
| overlay->active = 1; |
| |
| WARN_ON(IS_I830(dev) && !(dev_priv->quirks & QUIRK_PIPEA_FORCE)); |
| |
| ret = intel_ring_begin(ring, 4); |
| if (ret) |
| return ret; |
| |
| intel_ring_emit(ring, MI_OVERLAY_FLIP | MI_OVERLAY_ON); |
| intel_ring_emit(ring, overlay->flip_addr | OFC_UPDATE); |
| intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP); |
| intel_ring_emit(ring, MI_NOOP); |
| intel_ring_advance(ring); |
| |
| return intel_overlay_do_wait_request(overlay, NULL); |
| } |
| |
| /* overlay needs to be enabled in OCMD reg */ |
| static int intel_overlay_continue(struct intel_overlay *overlay, |
| bool load_polyphase_filter) |
| { |
| struct drm_device *dev = overlay->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_engine_cs *ring = &dev_priv->ring[RCS]; |
| u32 flip_addr = overlay->flip_addr; |
| u32 tmp; |
| int ret; |
| |
| BUG_ON(!overlay->active); |
| |
| if (load_polyphase_filter) |
| flip_addr |= OFC_UPDATE; |
| |
| /* check for underruns */ |
| tmp = I915_READ(DOVSTA); |
| if (tmp & (1 << 17)) |
| DRM_DEBUG("overlay underrun, DOVSTA: %x\n", tmp); |
| |
| ret = intel_ring_begin(ring, 2); |
| if (ret) |
| return ret; |
| |
| intel_ring_emit(ring, MI_OVERLAY_FLIP | MI_OVERLAY_CONTINUE); |
| intel_ring_emit(ring, flip_addr); |
| intel_ring_advance(ring); |
| |
| WARN_ON(overlay->last_flip_req); |
| i915_gem_request_assign(&overlay->last_flip_req, |
| ring->outstanding_lazy_request); |
| return i915_add_request(ring); |
| } |
| |
| static void intel_overlay_release_old_vid_tail(struct intel_overlay *overlay) |
| { |
| struct drm_i915_gem_object *obj = overlay->old_vid_bo; |
| |
| i915_gem_object_ggtt_unpin(obj); |
| drm_gem_object_unreference(&obj->base); |
| |
| overlay->old_vid_bo = NULL; |
| } |
| |
| static void intel_overlay_off_tail(struct intel_overlay *overlay) |
| { |
| struct drm_i915_gem_object *obj = overlay->vid_bo; |
| |
| /* never have the overlay hw on without showing a frame */ |
| BUG_ON(!overlay->vid_bo); |
| |
| i915_gem_object_ggtt_unpin(obj); |
| drm_gem_object_unreference(&obj->base); |
| overlay->vid_bo = NULL; |
| |
| overlay->crtc->overlay = NULL; |
| overlay->crtc = NULL; |
| overlay->active = 0; |
| } |
| |
| /* overlay needs to be disabled in OCMD reg */ |
| static int intel_overlay_off(struct intel_overlay *overlay) |
| { |
| struct drm_device *dev = overlay->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_engine_cs *ring = &dev_priv->ring[RCS]; |
| u32 flip_addr = overlay->flip_addr; |
| int ret; |
| |
| BUG_ON(!overlay->active); |
| |
| /* According to intel docs the overlay hw may hang (when switching |
| * off) without loading the filter coeffs. It is however unclear whether |
| * this applies to the disabling of the overlay or to the switching off |
| * of the hw. Do it in both cases */ |
| flip_addr |= OFC_UPDATE; |
| |
| ret = intel_ring_begin(ring, 6); |
| if (ret) |
| return ret; |
| |
| /* wait for overlay to go idle */ |
| intel_ring_emit(ring, MI_OVERLAY_FLIP | MI_OVERLAY_CONTINUE); |
| intel_ring_emit(ring, flip_addr); |
| intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP); |
| /* turn overlay off */ |
| if (IS_I830(dev)) { |
| /* Workaround: Don't disable the overlay fully, since otherwise |
| * it dies on the next OVERLAY_ON cmd. */ |
| intel_ring_emit(ring, MI_NOOP); |
| intel_ring_emit(ring, MI_NOOP); |
| intel_ring_emit(ring, MI_NOOP); |
| } else { |
| intel_ring_emit(ring, MI_OVERLAY_FLIP | MI_OVERLAY_OFF); |
| intel_ring_emit(ring, flip_addr); |
| intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP); |
| } |
| intel_ring_advance(ring); |
| |
| return intel_overlay_do_wait_request(overlay, intel_overlay_off_tail); |
| } |
| |
| /* recover from an interruption due to a signal |
| * We have to be careful not to repeat work forever an make forward progess. */ |
| static int intel_overlay_recover_from_interrupt(struct intel_overlay *overlay) |
| { |
| int ret; |
| |
| if (overlay->last_flip_req == NULL) |
| return 0; |
| |
| ret = i915_wait_request(overlay->last_flip_req); |
| if (ret) |
| return ret; |
| i915_gem_retire_requests(overlay->dev); |
| |
| if (overlay->flip_tail) |
| overlay->flip_tail(overlay); |
| |
| i915_gem_request_assign(&overlay->last_flip_req, NULL); |
| return 0; |
| } |
| |
| /* Wait for pending overlay flip and release old frame. |
| * Needs to be called before the overlay register are changed |
| * via intel_overlay_(un)map_regs |
| */ |
| static int intel_overlay_release_old_vid(struct intel_overlay *overlay) |
| { |
| struct drm_device *dev = overlay->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_engine_cs *ring = &dev_priv->ring[RCS]; |
| int ret; |
| |
| WARN_ON(!mutex_is_locked(&dev->struct_mutex)); |
| |
| /* Only wait if there is actually an old frame to release to |
| * guarantee forward progress. |
| */ |
| if (!overlay->old_vid_bo) |
| return 0; |
| |
| if (I915_READ(ISR) & I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT) { |
| /* synchronous slowpath */ |
| ret = intel_ring_begin(ring, 2); |
| if (ret) |
| return ret; |
| |
| intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP); |
| intel_ring_emit(ring, MI_NOOP); |
| intel_ring_advance(ring); |
| |
| ret = intel_overlay_do_wait_request(overlay, |
| intel_overlay_release_old_vid_tail); |
| if (ret) |
| return ret; |
| } |
| |
| intel_overlay_release_old_vid_tail(overlay); |
| |
| |
| i915_gem_track_fb(overlay->old_vid_bo, NULL, |
| INTEL_FRONTBUFFER_OVERLAY(overlay->crtc->pipe)); |
| return 0; |
| } |
| |
| void intel_overlay_reset(struct drm_i915_private *dev_priv) |
| { |
| struct intel_overlay *overlay = dev_priv->overlay; |
| |
| if (!overlay) |
| return; |
| |
| intel_overlay_release_old_vid(overlay); |
| |
| overlay->last_flip_req = NULL; |
| overlay->old_xscale = 0; |
| overlay->old_yscale = 0; |
| overlay->crtc = NULL; |
| overlay->active = false; |
| } |
| |
| struct put_image_params { |
| int format; |
| short dst_x; |
| short dst_y; |
| short dst_w; |
| short dst_h; |
| short src_w; |
| short src_scan_h; |
| short src_scan_w; |
| short src_h; |
| short stride_Y; |
| short stride_UV; |
| int offset_Y; |
| int offset_U; |
| int offset_V; |
| }; |
| |
| static int packed_depth_bytes(u32 format) |
| { |
| switch (format & I915_OVERLAY_DEPTH_MASK) { |
| case I915_OVERLAY_YUV422: |
| return 4; |
| case I915_OVERLAY_YUV411: |
| /* return 6; not implemented */ |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int packed_width_bytes(u32 format, short width) |
| { |
| switch (format & I915_OVERLAY_DEPTH_MASK) { |
| case I915_OVERLAY_YUV422: |
| return width << 1; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int uv_hsubsampling(u32 format) |
| { |
| switch (format & I915_OVERLAY_DEPTH_MASK) { |
| case I915_OVERLAY_YUV422: |
| case I915_OVERLAY_YUV420: |
| return 2; |
| case I915_OVERLAY_YUV411: |
| case I915_OVERLAY_YUV410: |
| return 4; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int uv_vsubsampling(u32 format) |
| { |
| switch (format & I915_OVERLAY_DEPTH_MASK) { |
| case I915_OVERLAY_YUV420: |
| case I915_OVERLAY_YUV410: |
| return 2; |
| case I915_OVERLAY_YUV422: |
| case I915_OVERLAY_YUV411: |
| return 1; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static u32 calc_swidthsw(struct drm_device *dev, u32 offset, u32 width) |
| { |
| u32 mask, shift, ret; |
| if (IS_GEN2(dev)) { |
| mask = 0x1f; |
| shift = 5; |
| } else { |
| mask = 0x3f; |
| shift = 6; |
| } |
| ret = ((offset + width + mask) >> shift) - (offset >> shift); |
| if (!IS_GEN2(dev)) |
| ret <<= 1; |
| ret -= 1; |
| return ret << 2; |
| } |
| |
| static const u16 y_static_hcoeffs[N_HORIZ_Y_TAPS * N_PHASES] = { |
| 0x3000, 0xb4a0, 0x1930, 0x1920, 0xb4a0, |
| 0x3000, 0xb500, 0x19d0, 0x1880, 0xb440, |
| 0x3000, 0xb540, 0x1a88, 0x2f80, 0xb3e0, |
| 0x3000, 0xb580, 0x1b30, 0x2e20, 0xb380, |
| 0x3000, 0xb5c0, 0x1bd8, 0x2cc0, 0xb320, |
| 0x3020, 0xb5e0, 0x1c60, 0x2b80, 0xb2c0, |
| 0x3020, 0xb5e0, 0x1cf8, 0x2a20, 0xb260, |
| 0x3020, 0xb5e0, 0x1d80, 0x28e0, 0xb200, |
| 0x3020, 0xb5c0, 0x1e08, 0x3f40, 0xb1c0, |
| 0x3020, 0xb580, 0x1e78, 0x3ce0, 0xb160, |
| 0x3040, 0xb520, 0x1ed8, 0x3aa0, 0xb120, |
| 0x3040, 0xb4a0, 0x1f30, 0x3880, 0xb0e0, |
| 0x3040, 0xb400, 0x1f78, 0x3680, 0xb0a0, |
| 0x3020, 0xb340, 0x1fb8, 0x34a0, 0xb060, |
| 0x3020, 0xb240, 0x1fe0, 0x32e0, 0xb040, |
| 0x3020, 0xb140, 0x1ff8, 0x3160, 0xb020, |
| 0xb000, 0x3000, 0x0800, 0x3000, 0xb000 |
| }; |
| |
| static const u16 uv_static_hcoeffs[N_HORIZ_UV_TAPS * N_PHASES] = { |
| 0x3000, 0x1800, 0x1800, 0xb000, 0x18d0, 0x2e60, |
| 0xb000, 0x1990, 0x2ce0, 0xb020, 0x1a68, 0x2b40, |
| 0xb040, 0x1b20, 0x29e0, 0xb060, 0x1bd8, 0x2880, |
| 0xb080, 0x1c88, 0x3e60, 0xb0a0, 0x1d28, 0x3c00, |
| 0xb0c0, 0x1db8, 0x39e0, 0xb0e0, 0x1e40, 0x37e0, |
| 0xb100, 0x1eb8, 0x3620, 0xb100, 0x1f18, 0x34a0, |
| 0xb100, 0x1f68, 0x3360, 0xb0e0, 0x1fa8, 0x3240, |
| 0xb0c0, 0x1fe0, 0x3140, 0xb060, 0x1ff0, 0x30a0, |
| 0x3000, 0x0800, 0x3000 |
| }; |
| |
| static void update_polyphase_filter(struct overlay_registers __iomem *regs) |
| { |
| memcpy_toio(regs->Y_HCOEFS, y_static_hcoeffs, sizeof(y_static_hcoeffs)); |
| memcpy_toio(regs->UV_HCOEFS, uv_static_hcoeffs, |
| sizeof(uv_static_hcoeffs)); |
| } |
| |
| static bool update_scaling_factors(struct intel_overlay *overlay, |
| struct overlay_registers __iomem *regs, |
| struct put_image_params *params) |
| { |
| /* fixed point with a 12 bit shift */ |
| u32 xscale, yscale, xscale_UV, yscale_UV; |
| #define FP_SHIFT 12 |
| #define FRACT_MASK 0xfff |
| bool scale_changed = false; |
| int uv_hscale = uv_hsubsampling(params->format); |
| int uv_vscale = uv_vsubsampling(params->format); |
| |
| if (params->dst_w > 1) |
| xscale = ((params->src_scan_w - 1) << FP_SHIFT) |
| /(params->dst_w); |
| else |
| xscale = 1 << FP_SHIFT; |
| |
| if (params->dst_h > 1) |
| yscale = ((params->src_scan_h - 1) << FP_SHIFT) |
| /(params->dst_h); |
| else |
| yscale = 1 << FP_SHIFT; |
| |
| /*if (params->format & I915_OVERLAY_YUV_PLANAR) {*/ |
| xscale_UV = xscale/uv_hscale; |
| yscale_UV = yscale/uv_vscale; |
| /* make the Y scale to UV scale ratio an exact multiply */ |
| xscale = xscale_UV * uv_hscale; |
| yscale = yscale_UV * uv_vscale; |
| /*} else { |
| xscale_UV = 0; |
| yscale_UV = 0; |
| }*/ |
| |
| if (xscale != overlay->old_xscale || yscale != overlay->old_yscale) |
| scale_changed = true; |
| overlay->old_xscale = xscale; |
| overlay->old_yscale = yscale; |
| |
| iowrite32(((yscale & FRACT_MASK) << 20) | |
| ((xscale >> FP_SHIFT) << 16) | |
| ((xscale & FRACT_MASK) << 3), |
| ®s->YRGBSCALE); |
| |
| iowrite32(((yscale_UV & FRACT_MASK) << 20) | |
| ((xscale_UV >> FP_SHIFT) << 16) | |
| ((xscale_UV & FRACT_MASK) << 3), |
| ®s->UVSCALE); |
| |
| iowrite32((((yscale >> FP_SHIFT) << 16) | |
| ((yscale_UV >> FP_SHIFT) << 0)), |
| ®s->UVSCALEV); |
| |
| if (scale_changed) |
| update_polyphase_filter(regs); |
| |
| return scale_changed; |
| } |
| |
| static void update_colorkey(struct intel_overlay *overlay, |
| struct overlay_registers __iomem *regs) |
| { |
| u32 key = overlay->color_key; |
| |
| switch (overlay->crtc->base.primary->fb->bits_per_pixel) { |
| case 8: |
| iowrite32(0, ®s->DCLRKV); |
| iowrite32(CLK_RGB8I_MASK | DST_KEY_ENABLE, ®s->DCLRKM); |
| break; |
| |
| case 16: |
| if (overlay->crtc->base.primary->fb->depth == 15) { |
| iowrite32(RGB15_TO_COLORKEY(key), ®s->DCLRKV); |
| iowrite32(CLK_RGB15_MASK | DST_KEY_ENABLE, |
| ®s->DCLRKM); |
| } else { |
| iowrite32(RGB16_TO_COLORKEY(key), ®s->DCLRKV); |
| iowrite32(CLK_RGB16_MASK | DST_KEY_ENABLE, |
| ®s->DCLRKM); |
| } |
| break; |
| |
| case 24: |
| case 32: |
| iowrite32(key, ®s->DCLRKV); |
| iowrite32(CLK_RGB24_MASK | DST_KEY_ENABLE, ®s->DCLRKM); |
| break; |
| } |
| } |
| |
| static u32 overlay_cmd_reg(struct put_image_params *params) |
| { |
| u32 cmd = OCMD_ENABLE | OCMD_BUF_TYPE_FRAME | OCMD_BUFFER0; |
| |
| if (params->format & I915_OVERLAY_YUV_PLANAR) { |
| switch (params->format & I915_OVERLAY_DEPTH_MASK) { |
| case I915_OVERLAY_YUV422: |
| cmd |= OCMD_YUV_422_PLANAR; |
| break; |
| case I915_OVERLAY_YUV420: |
| cmd |= OCMD_YUV_420_PLANAR; |
| break; |
| case I915_OVERLAY_YUV411: |
| case I915_OVERLAY_YUV410: |
| cmd |= OCMD_YUV_410_PLANAR; |
| break; |
| } |
| } else { /* YUV packed */ |
| switch (params->format & I915_OVERLAY_DEPTH_MASK) { |
| case I915_OVERLAY_YUV422: |
| cmd |= OCMD_YUV_422_PACKED; |
| break; |
| case I915_OVERLAY_YUV411: |
| cmd |= OCMD_YUV_411_PACKED; |
| break; |
| } |
| |
| switch (params->format & I915_OVERLAY_SWAP_MASK) { |
| case I915_OVERLAY_NO_SWAP: |
| break; |
| case I915_OVERLAY_UV_SWAP: |
| cmd |= OCMD_UV_SWAP; |
| break; |
| case I915_OVERLAY_Y_SWAP: |
| cmd |= OCMD_Y_SWAP; |
| break; |
| case I915_OVERLAY_Y_AND_UV_SWAP: |
| cmd |= OCMD_Y_AND_UV_SWAP; |
| break; |
| } |
| } |
| |
| return cmd; |
| } |
| |
| static int intel_overlay_do_put_image(struct intel_overlay *overlay, |
| struct drm_i915_gem_object *new_bo, |
| struct put_image_params *params) |
| { |
| int ret, tmp_width; |
| struct overlay_registers __iomem *regs; |
| bool scale_changed = false; |
| struct drm_device *dev = overlay->dev; |
| u32 swidth, swidthsw, sheight, ostride; |
| enum pipe pipe = overlay->crtc->pipe; |
| |
| BUG_ON(!mutex_is_locked(&dev->struct_mutex)); |
| BUG_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex)); |
| BUG_ON(!overlay); |
| |
| ret = intel_overlay_release_old_vid(overlay); |
| if (ret != 0) |
| return ret; |
| |
| ret = i915_gem_object_pin_to_display_plane(new_bo, 0, NULL, |
| &i915_ggtt_view_normal); |
| if (ret != 0) |
| return ret; |
| |
| ret = i915_gem_object_put_fence(new_bo); |
| if (ret) |
| goto out_unpin; |
| |
| if (!overlay->active) { |
| u32 oconfig; |
| regs = intel_overlay_map_regs(overlay); |
| if (!regs) { |
| ret = -ENOMEM; |
| goto out_unpin; |
| } |
| oconfig = OCONF_CC_OUT_8BIT; |
| if (IS_GEN4(overlay->dev)) |
| oconfig |= OCONF_CSC_MODE_BT709; |
| oconfig |= pipe == 0 ? |
| OCONF_PIPE_A : OCONF_PIPE_B; |
| iowrite32(oconfig, ®s->OCONFIG); |
| intel_overlay_unmap_regs(overlay, regs); |
| |
| ret = intel_overlay_on(overlay); |
| if (ret != 0) |
| goto out_unpin; |
| } |
| |
| regs = intel_overlay_map_regs(overlay); |
| if (!regs) { |
| ret = -ENOMEM; |
| goto out_unpin; |
| } |
| |
| iowrite32((params->dst_y << 16) | params->dst_x, ®s->DWINPOS); |
| iowrite32((params->dst_h << 16) | params->dst_w, ®s->DWINSZ); |
| |
| if (params->format & I915_OVERLAY_YUV_PACKED) |
| tmp_width = packed_width_bytes(params->format, params->src_w); |
| else |
| tmp_width = params->src_w; |
| |
| swidth = params->src_w; |
| swidthsw = calc_swidthsw(overlay->dev, params->offset_Y, tmp_width); |
| sheight = params->src_h; |
| iowrite32(i915_gem_obj_ggtt_offset(new_bo) + params->offset_Y, ®s->OBUF_0Y); |
| ostride = params->stride_Y; |
| |
| if (params->format & I915_OVERLAY_YUV_PLANAR) { |
| int uv_hscale = uv_hsubsampling(params->format); |
| int uv_vscale = uv_vsubsampling(params->format); |
| u32 tmp_U, tmp_V; |
| swidth |= (params->src_w/uv_hscale) << 16; |
| tmp_U = calc_swidthsw(overlay->dev, params->offset_U, |
| params->src_w/uv_hscale); |
| tmp_V = calc_swidthsw(overlay->dev, params->offset_V, |
| params->src_w/uv_hscale); |
| swidthsw |= max_t(u32, tmp_U, tmp_V) << 16; |
| sheight |= (params->src_h/uv_vscale) << 16; |
| iowrite32(i915_gem_obj_ggtt_offset(new_bo) + params->offset_U, ®s->OBUF_0U); |
| iowrite32(i915_gem_obj_ggtt_offset(new_bo) + params->offset_V, ®s->OBUF_0V); |
| ostride |= params->stride_UV << 16; |
| } |
| |
| iowrite32(swidth, ®s->SWIDTH); |
| iowrite32(swidthsw, ®s->SWIDTHSW); |
| iowrite32(sheight, ®s->SHEIGHT); |
| iowrite32(ostride, ®s->OSTRIDE); |
| |
| scale_changed = update_scaling_factors(overlay, regs, params); |
| |
| update_colorkey(overlay, regs); |
| |
| iowrite32(overlay_cmd_reg(params), ®s->OCMD); |
| |
| intel_overlay_unmap_regs(overlay, regs); |
| |
| ret = intel_overlay_continue(overlay, scale_changed); |
| if (ret) |
| goto out_unpin; |
| |
| i915_gem_track_fb(overlay->vid_bo, new_bo, |
| INTEL_FRONTBUFFER_OVERLAY(pipe)); |
| |
| overlay->old_vid_bo = overlay->vid_bo; |
| overlay->vid_bo = new_bo; |
| |
| intel_frontbuffer_flip(dev, |
| INTEL_FRONTBUFFER_OVERLAY(pipe)); |
| |
| return 0; |
| |
| out_unpin: |
| i915_gem_object_ggtt_unpin(new_bo); |
| return ret; |
| } |
| |
| int intel_overlay_switch_off(struct intel_overlay *overlay) |
| { |
| struct overlay_registers __iomem *regs; |
| struct drm_device *dev = overlay->dev; |
| int ret; |
| |
| BUG_ON(!mutex_is_locked(&dev->struct_mutex)); |
| BUG_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex)); |
| |
| ret = intel_overlay_recover_from_interrupt(overlay); |
| if (ret != 0) |
| return ret; |
| |
| if (!overlay->active) |
| return 0; |
| |
| ret = intel_overlay_release_old_vid(overlay); |
| if (ret != 0) |
| return ret; |
| |
| regs = intel_overlay_map_regs(overlay); |
| iowrite32(0, ®s->OCMD); |
| intel_overlay_unmap_regs(overlay, regs); |
| |
| ret = intel_overlay_off(overlay); |
| if (ret != 0) |
| return ret; |
| |
| intel_overlay_off_tail(overlay); |
| return 0; |
| } |
| |
| static int check_overlay_possible_on_crtc(struct intel_overlay *overlay, |
| struct intel_crtc *crtc) |
| { |
| if (!crtc->active) |
| return -EINVAL; |
| |
| /* can't use the overlay with double wide pipe */ |
| if (crtc->config->double_wide) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static void update_pfit_vscale_ratio(struct intel_overlay *overlay) |
| { |
| struct drm_device *dev = overlay->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 pfit_control = I915_READ(PFIT_CONTROL); |
| u32 ratio; |
| |
| /* XXX: This is not the same logic as in the xorg driver, but more in |
| * line with the intel documentation for the i965 |
| */ |
| if (INTEL_INFO(dev)->gen >= 4) { |
| /* on i965 use the PGM reg to read out the autoscaler values */ |
| ratio = I915_READ(PFIT_PGM_RATIOS) >> PFIT_VERT_SCALE_SHIFT_965; |
| } else { |
| if (pfit_control & VERT_AUTO_SCALE) |
| ratio = I915_READ(PFIT_AUTO_RATIOS); |
| else |
| ratio = I915_READ(PFIT_PGM_RATIOS); |
| ratio >>= PFIT_VERT_SCALE_SHIFT; |
| } |
| |
| overlay->pfit_vscale_ratio = ratio; |
| } |
| |
| static int check_overlay_dst(struct intel_overlay *overlay, |
| struct drm_intel_overlay_put_image *rec) |
| { |
| struct drm_display_mode *mode = &overlay->crtc->base.mode; |
| |
| if (rec->dst_x < mode->hdisplay && |
| rec->dst_x + rec->dst_width <= mode->hdisplay && |
| rec->dst_y < mode->vdisplay && |
| rec->dst_y + rec->dst_height <= mode->vdisplay) |
| return 0; |
| else |
| return -EINVAL; |
| } |
| |
| static int check_overlay_scaling(struct put_image_params *rec) |
| { |
| u32 tmp; |
| |
| /* downscaling limit is 8.0 */ |
| tmp = ((rec->src_scan_h << 16) / rec->dst_h) >> 16; |
| if (tmp > 7) |
| return -EINVAL; |
| tmp = ((rec->src_scan_w << 16) / rec->dst_w) >> 16; |
| if (tmp > 7) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int check_overlay_src(struct drm_device *dev, |
| struct drm_intel_overlay_put_image *rec, |
| struct drm_i915_gem_object *new_bo) |
| { |
| int uv_hscale = uv_hsubsampling(rec->flags); |
| int uv_vscale = uv_vsubsampling(rec->flags); |
| u32 stride_mask; |
| int depth; |
| u32 tmp; |
| |
| /* check src dimensions */ |
| if (IS_845G(dev) || IS_I830(dev)) { |
| if (rec->src_height > IMAGE_MAX_HEIGHT_LEGACY || |
| rec->src_width > IMAGE_MAX_WIDTH_LEGACY) |
| return -EINVAL; |
| } else { |
| if (rec->src_height > IMAGE_MAX_HEIGHT || |
| rec->src_width > IMAGE_MAX_WIDTH) |
| return -EINVAL; |
| } |
| |
| /* better safe than sorry, use 4 as the maximal subsampling ratio */ |
| if (rec->src_height < N_VERT_Y_TAPS*4 || |
| rec->src_width < N_HORIZ_Y_TAPS*4) |
| return -EINVAL; |
| |
| /* check alignment constraints */ |
| switch (rec->flags & I915_OVERLAY_TYPE_MASK) { |
| case I915_OVERLAY_RGB: |
| /* not implemented */ |
| return -EINVAL; |
| |
| case I915_OVERLAY_YUV_PACKED: |
| if (uv_vscale != 1) |
| return -EINVAL; |
| |
| depth = packed_depth_bytes(rec->flags); |
| if (depth < 0) |
| return depth; |
| |
| /* ignore UV planes */ |
| rec->stride_UV = 0; |
| rec->offset_U = 0; |
| rec->offset_V = 0; |
| /* check pixel alignment */ |
| if (rec->offset_Y % depth) |
| return -EINVAL; |
| break; |
| |
| case I915_OVERLAY_YUV_PLANAR: |
| if (uv_vscale < 0 || uv_hscale < 0) |
| return -EINVAL; |
| /* no offset restrictions for planar formats */ |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| if (rec->src_width % uv_hscale) |
| return -EINVAL; |
| |
| /* stride checking */ |
| if (IS_I830(dev) || IS_845G(dev)) |
| stride_mask = 255; |
| else |
| stride_mask = 63; |
| |
| if (rec->stride_Y & stride_mask || rec->stride_UV & stride_mask) |
| return -EINVAL; |
| if (IS_GEN4(dev) && rec->stride_Y < 512) |
| return -EINVAL; |
| |
| tmp = (rec->flags & I915_OVERLAY_TYPE_MASK) == I915_OVERLAY_YUV_PLANAR ? |
| 4096 : 8192; |
| if (rec->stride_Y > tmp || rec->stride_UV > 2*1024) |
| return -EINVAL; |
| |
| /* check buffer dimensions */ |
| switch (rec->flags & I915_OVERLAY_TYPE_MASK) { |
| case I915_OVERLAY_RGB: |
| case I915_OVERLAY_YUV_PACKED: |
| /* always 4 Y values per depth pixels */ |
| if (packed_width_bytes(rec->flags, rec->src_width) > rec->stride_Y) |
| return -EINVAL; |
| |
| tmp = rec->stride_Y*rec->src_height; |
| if (rec->offset_Y + tmp > new_bo->base.size) |
| return -EINVAL; |
| break; |
| |
| case I915_OVERLAY_YUV_PLANAR: |
| if (rec->src_width > rec->stride_Y) |
| return -EINVAL; |
| if (rec->src_width/uv_hscale > rec->stride_UV) |
| return -EINVAL; |
| |
| tmp = rec->stride_Y * rec->src_height; |
| if (rec->offset_Y + tmp > new_bo->base.size) |
| return -EINVAL; |
| |
| tmp = rec->stride_UV * (rec->src_height / uv_vscale); |
| if (rec->offset_U + tmp > new_bo->base.size || |
| rec->offset_V + tmp > new_bo->base.size) |
| return -EINVAL; |
| break; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * Return the pipe currently connected to the panel fitter, |
| * or -1 if the panel fitter is not present or not in use |
| */ |
| static int intel_panel_fitter_pipe(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 pfit_control; |
| |
| /* i830 doesn't have a panel fitter */ |
| if (INTEL_INFO(dev)->gen <= 3 && (IS_I830(dev) || !IS_MOBILE(dev))) |
| return -1; |
| |
| pfit_control = I915_READ(PFIT_CONTROL); |
| |
| /* See if the panel fitter is in use */ |
| if ((pfit_control & PFIT_ENABLE) == 0) |
| return -1; |
| |
| /* 965 can place panel fitter on either pipe */ |
| if (IS_GEN4(dev)) |
| return (pfit_control >> 29) & 0x3; |
| |
| /* older chips can only use pipe 1 */ |
| return 1; |
| } |
| |
| int intel_overlay_put_image(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_intel_overlay_put_image *put_image_rec = data; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_overlay *overlay; |
| struct drm_crtc *drmmode_crtc; |
| struct intel_crtc *crtc; |
| struct drm_i915_gem_object *new_bo; |
| struct put_image_params *params; |
| int ret; |
| |
| overlay = dev_priv->overlay; |
| if (!overlay) { |
| DRM_DEBUG("userspace bug: no overlay\n"); |
| return -ENODEV; |
| } |
| |
| if (!(put_image_rec->flags & I915_OVERLAY_ENABLE)) { |
| drm_modeset_lock_all(dev); |
| mutex_lock(&dev->struct_mutex); |
| |
| ret = intel_overlay_switch_off(overlay); |
| |
| mutex_unlock(&dev->struct_mutex); |
| drm_modeset_unlock_all(dev); |
| |
| return ret; |
| } |
| |
| params = kmalloc(sizeof(*params), GFP_KERNEL); |
| if (!params) |
| return -ENOMEM; |
| |
| drmmode_crtc = drm_crtc_find(dev, put_image_rec->crtc_id); |
| if (!drmmode_crtc) { |
| ret = -ENOENT; |
| goto out_free; |
| } |
| crtc = to_intel_crtc(drmmode_crtc); |
| |
| new_bo = to_intel_bo(drm_gem_object_lookup(dev, file_priv, |
| put_image_rec->bo_handle)); |
| if (&new_bo->base == NULL) { |
| ret = -ENOENT; |
| goto out_free; |
| } |
| |
| drm_modeset_lock_all(dev); |
| mutex_lock(&dev->struct_mutex); |
| |
| if (new_bo->tiling_mode) { |
| DRM_DEBUG_KMS("buffer used for overlay image can not be tiled\n"); |
| ret = -EINVAL; |
| goto out_unlock; |
| } |
| |
| ret = intel_overlay_recover_from_interrupt(overlay); |
| if (ret != 0) |
| goto out_unlock; |
| |
| if (overlay->crtc != crtc) { |
| struct drm_display_mode *mode = &crtc->base.mode; |
| ret = intel_overlay_switch_off(overlay); |
| if (ret != 0) |
| goto out_unlock; |
| |
| ret = check_overlay_possible_on_crtc(overlay, crtc); |
| if (ret != 0) |
| goto out_unlock; |
| |
| overlay->crtc = crtc; |
| crtc->overlay = overlay; |
| |
| /* line too wide, i.e. one-line-mode */ |
| if (mode->hdisplay > 1024 && |
| intel_panel_fitter_pipe(dev) == crtc->pipe) { |
| overlay->pfit_active = 1; |
| update_pfit_vscale_ratio(overlay); |
| } else |
| overlay->pfit_active = 0; |
| } |
| |
| ret = check_overlay_dst(overlay, put_image_rec); |
| if (ret != 0) |
| goto out_unlock; |
| |
| if (overlay->pfit_active) { |
| params->dst_y = ((((u32)put_image_rec->dst_y) << 12) / |
| overlay->pfit_vscale_ratio); |
| /* shifting right rounds downwards, so add 1 */ |
| params->dst_h = ((((u32)put_image_rec->dst_height) << 12) / |
| overlay->pfit_vscale_ratio) + 1; |
| } else { |
| params->dst_y = put_image_rec->dst_y; |
| params->dst_h = put_image_rec->dst_height; |
| } |
| params->dst_x = put_image_rec->dst_x; |
| params->dst_w = put_image_rec->dst_width; |
| |
| params->src_w = put_image_rec->src_width; |
| params->src_h = put_image_rec->src_height; |
| params->src_scan_w = put_image_rec->src_scan_width; |
| params->src_scan_h = put_image_rec->src_scan_height; |
| if (params->src_scan_h > params->src_h || |
| params->src_scan_w > params->src_w) { |
| ret = -EINVAL; |
| goto out_unlock; |
| } |
| |
| ret = check_overlay_src(dev, put_image_rec, new_bo); |
| if (ret != 0) |
| goto out_unlock; |
| params->format = put_image_rec->flags & ~I915_OVERLAY_FLAGS_MASK; |
| params->stride_Y = put_image_rec->stride_Y; |
| params->stride_UV = put_image_rec->stride_UV; |
| params->offset_Y = put_image_rec->offset_Y; |
| params->offset_U = put_image_rec->offset_U; |
| params->offset_V = put_image_rec->offset_V; |
| |
| /* Check scaling after src size to prevent a divide-by-zero. */ |
| ret = check_overlay_scaling(params); |
| if (ret != 0) |
| goto out_unlock; |
| |
| ret = intel_overlay_do_put_image(overlay, new_bo, params); |
| if (ret != 0) |
| goto out_unlock; |
| |
| mutex_unlock(&dev->struct_mutex); |
| drm_modeset_unlock_all(dev); |
| |
| kfree(params); |
| |
| return 0; |
| |
| out_unlock: |
| mutex_unlock(&dev->struct_mutex); |
| drm_modeset_unlock_all(dev); |
| drm_gem_object_unreference_unlocked(&new_bo->base); |
| out_free: |
| kfree(params); |
| |
| return ret; |
| } |
| |
| static void update_reg_attrs(struct intel_overlay *overlay, |
| struct overlay_registers __iomem *regs) |
| { |
| iowrite32((overlay->contrast << 18) | (overlay->brightness & 0xff), |
| ®s->OCLRC0); |
| iowrite32(overlay->saturation, ®s->OCLRC1); |
| } |
| |
| static bool check_gamma_bounds(u32 gamma1, u32 gamma2) |
| { |
| int i; |
| |
| if (gamma1 & 0xff000000 || gamma2 & 0xff000000) |
| return false; |
| |
| for (i = 0; i < 3; i++) { |
| if (((gamma1 >> i*8) & 0xff) >= ((gamma2 >> i*8) & 0xff)) |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static bool check_gamma5_errata(u32 gamma5) |
| { |
| int i; |
| |
| for (i = 0; i < 3; i++) { |
| if (((gamma5 >> i*8) & 0xff) == 0x80) |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static int check_gamma(struct drm_intel_overlay_attrs *attrs) |
| { |
| if (!check_gamma_bounds(0, attrs->gamma0) || |
| !check_gamma_bounds(attrs->gamma0, attrs->gamma1) || |
| !check_gamma_bounds(attrs->gamma1, attrs->gamma2) || |
| !check_gamma_bounds(attrs->gamma2, attrs->gamma3) || |
| !check_gamma_bounds(attrs->gamma3, attrs->gamma4) || |
| !check_gamma_bounds(attrs->gamma4, attrs->gamma5) || |
| !check_gamma_bounds(attrs->gamma5, 0x00ffffff)) |
| return -EINVAL; |
| |
| if (!check_gamma5_errata(attrs->gamma5)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| int intel_overlay_attrs(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_intel_overlay_attrs *attrs = data; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_overlay *overlay; |
| struct overlay_registers __iomem *regs; |
| int ret; |
| |
| overlay = dev_priv->overlay; |
| if (!overlay) { |
| DRM_DEBUG("userspace bug: no overlay\n"); |
| return -ENODEV; |
| } |
| |
| drm_modeset_lock_all(dev); |
| mutex_lock(&dev->struct_mutex); |
| |
| ret = -EINVAL; |
| if (!(attrs->flags & I915_OVERLAY_UPDATE_ATTRS)) { |
| attrs->color_key = overlay->color_key; |
| attrs->brightness = overlay->brightness; |
| attrs->contrast = overlay->contrast; |
| attrs->saturation = overlay->saturation; |
| |
| if (!IS_GEN2(dev)) { |
| attrs->gamma0 = I915_READ(OGAMC0); |
| attrs->gamma1 = I915_READ(OGAMC1); |
| attrs->gamma2 = I915_READ(OGAMC2); |
| attrs->gamma3 = I915_READ(OGAMC3); |
| attrs->gamma4 = I915_READ(OGAMC4); |
| attrs->gamma5 = I915_READ(OGAMC5); |
| } |
| } else { |
| if (attrs->brightness < -128 || attrs->brightness > 127) |
| goto out_unlock; |
| if (attrs->contrast > 255) |
| goto out_unlock; |
| if (attrs->saturation > 1023) |
| goto out_unlock; |
| |
| overlay->color_key = attrs->color_key; |
| overlay->brightness = attrs->brightness; |
| overlay->contrast = attrs->contrast; |
| overlay->saturation = attrs->saturation; |
| |
| regs = intel_overlay_map_regs(overlay); |
| if (!regs) { |
| ret = -ENOMEM; |
| goto out_unlock; |
| } |
| |
| update_reg_attrs(overlay, regs); |
| |
| intel_overlay_unmap_regs(overlay, regs); |
| |
| if (attrs->flags & I915_OVERLAY_UPDATE_GAMMA) { |
| if (IS_GEN2(dev)) |
| goto out_unlock; |
| |
| if (overlay->active) { |
| ret = -EBUSY; |
| goto out_unlock; |
| } |
| |
| ret = check_gamma(attrs); |
| if (ret) |
| goto out_unlock; |
| |
| I915_WRITE(OGAMC0, attrs->gamma0); |
| I915_WRITE(OGAMC1, attrs->gamma1); |
| I915_WRITE(OGAMC2, attrs->gamma2); |
| I915_WRITE(OGAMC3, attrs->gamma3); |
| I915_WRITE(OGAMC4, attrs->gamma4); |
| I915_WRITE(OGAMC5, attrs->gamma5); |
| } |
| } |
| |
| ret = 0; |
| out_unlock: |
| mutex_unlock(&dev->struct_mutex); |
| drm_modeset_unlock_all(dev); |
| |
| return ret; |
| } |
| |
| void intel_setup_overlay(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_overlay *overlay; |
| struct drm_i915_gem_object *reg_bo; |
| struct overlay_registers __iomem *regs; |
| int ret; |
| |
| if (!HAS_OVERLAY(dev)) |
| return; |
| |
| overlay = kzalloc(sizeof(*overlay), GFP_KERNEL); |
| if (!overlay) |
| return; |
| |
| mutex_lock(&dev->struct_mutex); |
| if (WARN_ON(dev_priv->overlay)) |
| goto out_free; |
| |
| overlay->dev = dev; |
| |
| reg_bo = NULL; |
| if (!OVERLAY_NEEDS_PHYSICAL(dev)) |
| reg_bo = i915_gem_object_create_stolen(dev, PAGE_SIZE); |
| if (reg_bo == NULL) |
| reg_bo = i915_gem_alloc_object(dev, PAGE_SIZE); |
| if (reg_bo == NULL) |
| goto out_free; |
| overlay->reg_bo = reg_bo; |
| |
| if (OVERLAY_NEEDS_PHYSICAL(dev)) { |
| ret = i915_gem_object_attach_phys(reg_bo, PAGE_SIZE); |
| if (ret) { |
| DRM_ERROR("failed to attach phys overlay regs\n"); |
| goto out_free_bo; |
| } |
| overlay->flip_addr = reg_bo->phys_handle->busaddr; |
| } else { |
| ret = i915_gem_obj_ggtt_pin(reg_bo, PAGE_SIZE, PIN_MAPPABLE); |
| if (ret) { |
| DRM_ERROR("failed to pin overlay register bo\n"); |
| goto out_free_bo; |
| } |
| overlay->flip_addr = i915_gem_obj_ggtt_offset(reg_bo); |
| |
| ret = i915_gem_object_set_to_gtt_domain(reg_bo, true); |
| if (ret) { |
| DRM_ERROR("failed to move overlay register bo into the GTT\n"); |
| goto out_unpin_bo; |
| } |
| } |
| |
| /* init all values */ |
| overlay->color_key = 0x0101fe; |
| overlay->brightness = -19; |
| overlay->contrast = 75; |
| overlay->saturation = 146; |
| |
| regs = intel_overlay_map_regs(overlay); |
| if (!regs) |
| goto out_unpin_bo; |
| |
| memset_io(regs, 0, sizeof(struct overlay_registers)); |
| update_polyphase_filter(regs); |
| update_reg_attrs(overlay, regs); |
| |
| intel_overlay_unmap_regs(overlay, regs); |
| |
| dev_priv->overlay = overlay; |
| mutex_unlock(&dev->struct_mutex); |
| DRM_INFO("initialized overlay support\n"); |
| return; |
| |
| out_unpin_bo: |
| if (!OVERLAY_NEEDS_PHYSICAL(dev)) |
| i915_gem_object_ggtt_unpin(reg_bo); |
| out_free_bo: |
| drm_gem_object_unreference(®_bo->base); |
| out_free: |
| mutex_unlock(&dev->struct_mutex); |
| kfree(overlay); |
| return; |
| } |
| |
| void intel_cleanup_overlay(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (!dev_priv->overlay) |
| return; |
| |
| /* The bo's should be free'd by the generic code already. |
| * Furthermore modesetting teardown happens beforehand so the |
| * hardware should be off already */ |
| BUG_ON(dev_priv->overlay->active); |
| |
| drm_gem_object_unreference_unlocked(&dev_priv->overlay->reg_bo->base); |
| kfree(dev_priv->overlay); |
| } |
| |
| struct intel_overlay_error_state { |
| struct overlay_registers regs; |
| unsigned long base; |
| u32 dovsta; |
| u32 isr; |
| }; |
| |
| static struct overlay_registers __iomem * |
| intel_overlay_map_regs_atomic(struct intel_overlay *overlay) |
| { |
| struct drm_i915_private *dev_priv = overlay->dev->dev_private; |
| struct overlay_registers __iomem *regs; |
| |
| if (OVERLAY_NEEDS_PHYSICAL(overlay->dev)) |
| /* Cast to make sparse happy, but it's wc memory anyway, so |
| * equivalent to the wc io mapping on X86. */ |
| regs = (struct overlay_registers __iomem *) |
| overlay->reg_bo->phys_handle->vaddr; |
| else |
| regs = io_mapping_map_atomic_wc(dev_priv->gtt.mappable, |
| i915_gem_obj_ggtt_offset(overlay->reg_bo)); |
| |
| return regs; |
| } |
| |
| static void intel_overlay_unmap_regs_atomic(struct intel_overlay *overlay, |
| struct overlay_registers __iomem *regs) |
| { |
| if (!OVERLAY_NEEDS_PHYSICAL(overlay->dev)) |
| io_mapping_unmap_atomic(regs); |
| } |
| |
| |
| struct intel_overlay_error_state * |
| intel_overlay_capture_error_state(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_overlay *overlay = dev_priv->overlay; |
| struct intel_overlay_error_state *error; |
| struct overlay_registers __iomem *regs; |
| |
| if (!overlay || !overlay->active) |
| return NULL; |
| |
| error = kmalloc(sizeof(*error), GFP_ATOMIC); |
| if (error == NULL) |
| return NULL; |
| |
| error->dovsta = I915_READ(DOVSTA); |
| error->isr = I915_READ(ISR); |
| if (OVERLAY_NEEDS_PHYSICAL(overlay->dev)) |
| error->base = (__force long)overlay->reg_bo->phys_handle->vaddr; |
| else |
| error->base = i915_gem_obj_ggtt_offset(overlay->reg_bo); |
| |
| regs = intel_overlay_map_regs_atomic(overlay); |
| if (!regs) |
| goto err; |
| |
| memcpy_fromio(&error->regs, regs, sizeof(struct overlay_registers)); |
| intel_overlay_unmap_regs_atomic(overlay, regs); |
| |
| return error; |
| |
| err: |
| kfree(error); |
| return NULL; |
| } |
| |
| void |
| intel_overlay_print_error_state(struct drm_i915_error_state_buf *m, |
| struct intel_overlay_error_state *error) |
| { |
| i915_error_printf(m, "Overlay, status: 0x%08x, interrupt: 0x%08x\n", |
| error->dovsta, error->isr); |
| i915_error_printf(m, " Register file at 0x%08lx:\n", |
| error->base); |
| |
| #define P(x) i915_error_printf(m, " " #x ": 0x%08x\n", error->regs.x) |
| P(OBUF_0Y); |
| P(OBUF_1Y); |
| P(OBUF_0U); |
| P(OBUF_0V); |
| P(OBUF_1U); |
| P(OBUF_1V); |
| P(OSTRIDE); |
| P(YRGB_VPH); |
| P(UV_VPH); |
| P(HORZ_PH); |
| P(INIT_PHS); |
| P(DWINPOS); |
| P(DWINSZ); |
| P(SWIDTH); |
| P(SWIDTHSW); |
| P(SHEIGHT); |
| P(YRGBSCALE); |
| P(UVSCALE); |
| P(OCLRC0); |
| P(OCLRC1); |
| P(DCLRKV); |
| P(DCLRKM); |
| P(SCLRKVH); |
| P(SCLRKVL); |
| P(SCLRKEN); |
| P(OCONFIG); |
| P(OCMD); |
| P(OSTART_0Y); |
| P(OSTART_1Y); |
| P(OSTART_0U); |
| P(OSTART_0V); |
| P(OSTART_1U); |
| P(OSTART_1V); |
| P(OTILEOFF_0Y); |
| P(OTILEOFF_1Y); |
| P(OTILEOFF_0U); |
| P(OTILEOFF_0V); |
| P(OTILEOFF_1U); |
| P(OTILEOFF_1V); |
| P(FASTHSCALE); |
| P(UVSCALEV); |
| #undef P |
| } |