[SCSI] qla4xxx: fix flash/ddb support
With open-iscsi support, target entries persisted in the FLASH were not
login. Added support in the qla4xxx driver to do the login on probe
time to the target entries saved in the FLASH by user.
With this changes upgrade to the new kernel with open-iscsi support in
qla4xxx will ensure users original target entries login on driver load
Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index 3075fba..0497873 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -773,14 +773,14 @@
* be freed so that when login happens from user space there are free DDB
* indices available.
**/
-static void qla4xxx_free_ddb_index(struct scsi_qla_host *ha)
+void qla4xxx_free_ddb_index(struct scsi_qla_host *ha)
{
int max_ddbs;
int ret;
uint32_t idx = 0, next_idx = 0;
uint32_t state = 0, conn_err = 0;
- max_ddbs = is_qla40XX(ha) ? MAX_PRST_DEV_DB_ENTRIES :
+ max_ddbs = is_qla40XX(ha) ? MAX_DEV_DB_ENTRIES_40XX :
MAX_DEV_DB_ENTRIES;
for (idx = 0; idx < max_ddbs; idx = next_idx) {
@@ -804,7 +804,6 @@
}
}
-
/**
* qla4xxx_initialize_adapter - initiailizes hba
* @ha: Pointer to host adapter structure.
@@ -812,7 +811,7 @@
* This routine parforms all of the steps necessary to initialize the adapter.
*
**/
-int qla4xxx_initialize_adapter(struct scsi_qla_host *ha)
+int qla4xxx_initialize_adapter(struct scsi_qla_host *ha, int is_reset)
{
int status = QLA_ERROR;
@@ -840,7 +839,8 @@
if (status == QLA_ERROR)
goto exit_init_hba;
- qla4xxx_free_ddb_index(ha);
+ if (is_reset == RESET_ADAPTER)
+ qla4xxx_build_ddb_list(ha, is_reset);
set_bit(AF_ONLINE, &ha->flags);
exit_init_hba:
@@ -855,38 +855,12 @@
return status;
}
-/**
- * qla4xxx_process_ddb_changed - process ddb state change
- * @ha - Pointer to host adapter structure.
- * @fw_ddb_index - Firmware's device database index
- * @state - Device state
- *
- * This routine processes a Decive Database Changed AEN Event.
- **/
-int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
- uint32_t state, uint32_t conn_err)
+int qla4xxx_ddb_change(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
+ struct ddb_entry *ddb_entry, uint32_t state)
{
- struct ddb_entry * ddb_entry;
uint32_t old_fw_ddb_device_state;
int status = QLA_ERROR;
- /* check for out of range index */
- if (fw_ddb_index >= MAX_DDB_ENTRIES)
- goto exit_ddb_event;
-
- /* Get the corresponging ddb entry */
- ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, fw_ddb_index);
- /* Device does not currently exist in our database. */
- if (ddb_entry == NULL) {
- ql4_printk(KERN_ERR, ha, "%s: No ddb_entry at FW index [%d]\n",
- __func__, fw_ddb_index);
-
- if (state == DDB_DS_NO_CONNECTION_ACTIVE)
- clear_bit(fw_ddb_index, ha->ddb_idx_map);
-
- goto exit_ddb_event;
- }
-
old_fw_ddb_device_state = ddb_entry->fw_ddb_device_state;
DEBUG2(ql4_printk(KERN_INFO, ha,
"%s: DDB - old state = 0x%x, new state = 0x%x for "
@@ -900,9 +874,7 @@
switch (state) {
case DDB_DS_SESSION_ACTIVE:
case DDB_DS_DISCOVERY:
- iscsi_conn_start(ddb_entry->conn);
- iscsi_conn_login_event(ddb_entry->conn,
- ISCSI_CONN_STATE_LOGGED_IN);
+ ddb_entry->unblock_sess(ddb_entry->sess);
qla4xxx_update_session_conn_param(ha, ddb_entry);
status = QLA_SUCCESS;
break;
@@ -936,9 +908,7 @@
switch (state) {
case DDB_DS_SESSION_ACTIVE:
case DDB_DS_DISCOVERY:
- iscsi_conn_start(ddb_entry->conn);
- iscsi_conn_login_event(ddb_entry->conn,
- ISCSI_CONN_STATE_LOGGED_IN);
+ ddb_entry->unblock_sess(ddb_entry->sess);
qla4xxx_update_session_conn_param(ha, ddb_entry);
status = QLA_SUCCESS;
break;
@@ -954,7 +924,198 @@
__func__));
break;
}
+ return status;
+}
+
+void qla4xxx_arm_relogin_timer(struct ddb_entry *ddb_entry)
+{
+ /*
+ * This triggers a relogin. After the relogin_timer
+ * expires, the relogin gets scheduled. We must wait a
+ * minimum amount of time since receiving an 0x8014 AEN
+ * with failed device_state or a logout response before
+ * we can issue another relogin.
+ *
+ * Firmware pads this timeout: (time2wait +1).
+ * Driver retry to login should be longer than F/W.
+ * Otherwise F/W will fail
+ * set_ddb() mbx cmd with 0x4005 since it still
+ * counting down its time2wait.
+ */
+ atomic_set(&ddb_entry->relogin_timer, 0);
+ atomic_set(&ddb_entry->retry_relogin_timer,
+ ddb_entry->default_time2wait + 4);
+
+}
+
+int qla4xxx_flash_ddb_change(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
+ struct ddb_entry *ddb_entry, uint32_t state)
+{
+ uint32_t old_fw_ddb_device_state;
+ int status = QLA_ERROR;
+
+ old_fw_ddb_device_state = ddb_entry->fw_ddb_device_state;
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "%s: DDB - old state = 0x%x, new state = 0x%x for "
+ "index [%d]\n", __func__,
+ ddb_entry->fw_ddb_device_state, state, fw_ddb_index));
+
+ ddb_entry->fw_ddb_device_state = state;
+
+ switch (old_fw_ddb_device_state) {
+ case DDB_DS_LOGIN_IN_PROCESS:
+ case DDB_DS_NO_CONNECTION_ACTIVE:
+ switch (state) {
+ case DDB_DS_SESSION_ACTIVE:
+ ddb_entry->unblock_sess(ddb_entry->sess);
+ qla4xxx_update_session_conn_fwddb_param(ha, ddb_entry);
+ status = QLA_SUCCESS;
+ break;
+ case DDB_DS_SESSION_FAILED:
+ iscsi_block_session(ddb_entry->sess);
+ if (!test_bit(DF_RELOGIN, &ddb_entry->flags))
+ qla4xxx_arm_relogin_timer(ddb_entry);
+ status = QLA_SUCCESS;
+ break;
+ }
+ break;
+ case DDB_DS_SESSION_ACTIVE:
+ switch (state) {
+ case DDB_DS_SESSION_FAILED:
+ iscsi_block_session(ddb_entry->sess);
+ if (!test_bit(DF_RELOGIN, &ddb_entry->flags))
+ qla4xxx_arm_relogin_timer(ddb_entry);
+ status = QLA_SUCCESS;
+ break;
+ }
+ break;
+ case DDB_DS_SESSION_FAILED:
+ switch (state) {
+ case DDB_DS_SESSION_ACTIVE:
+ ddb_entry->unblock_sess(ddb_entry->sess);
+ qla4xxx_update_session_conn_fwddb_param(ha, ddb_entry);
+ status = QLA_SUCCESS;
+ break;
+ case DDB_DS_SESSION_FAILED:
+ if (!test_bit(DF_RELOGIN, &ddb_entry->flags))
+ qla4xxx_arm_relogin_timer(ddb_entry);
+ status = QLA_SUCCESS;
+ break;
+ }
+ break;
+ default:
+ DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Unknown Event\n",
+ __func__));
+ break;
+ }
+ return status;
+}
+
+/**
+ * qla4xxx_process_ddb_changed - process ddb state change
+ * @ha - Pointer to host adapter structure.
+ * @fw_ddb_index - Firmware's device database index
+ * @state - Device state
+ *
+ * This routine processes a Decive Database Changed AEN Event.
+ **/
+int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha,
+ uint32_t fw_ddb_index,
+ uint32_t state, uint32_t conn_err)
+{
+ struct ddb_entry *ddb_entry;
+ int status = QLA_ERROR;
+
+ /* check for out of range index */
+ if (fw_ddb_index >= MAX_DDB_ENTRIES)
+ goto exit_ddb_event;
+
+ /* Get the corresponging ddb entry */
+ ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, fw_ddb_index);
+ /* Device does not currently exist in our database. */
+ if (ddb_entry == NULL) {
+ ql4_printk(KERN_ERR, ha, "%s: No ddb_entry at FW index [%d]\n",
+ __func__, fw_ddb_index);
+
+ if (state == DDB_DS_NO_CONNECTION_ACTIVE)
+ clear_bit(fw_ddb_index, ha->ddb_idx_map);
+
+ goto exit_ddb_event;
+ }
+
+ ddb_entry->ddb_change(ha, fw_ddb_index, ddb_entry, state);
exit_ddb_event:
return status;
}
+
+/**
+ * qla4xxx_login_flash_ddb - Login to target (DDB)
+ * @cls_session: Pointer to the session to login
+ *
+ * This routine logins to the target.
+ * Issues setddb and conn open mbx
+ **/
+void qla4xxx_login_flash_ddb(struct iscsi_cls_session *cls_session)
+{
+ struct iscsi_session *sess;
+ struct ddb_entry *ddb_entry;
+ struct scsi_qla_host *ha;
+ struct dev_db_entry *fw_ddb_entry = NULL;
+ dma_addr_t fw_ddb_dma;
+ uint32_t mbx_sts = 0;
+ int ret;
+
+ sess = cls_session->dd_data;
+ ddb_entry = sess->dd_data;
+ ha = ddb_entry->ha;
+
+ if (!test_bit(AF_LINK_UP, &ha->flags))
+ return;
+
+ if (ddb_entry->ddb_type != FLASH_DDB) {
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "Skipping login to non FLASH DB"));
+ goto exit_login;
+ }
+
+ fw_ddb_entry = dma_pool_alloc(ha->fw_ddb_dma_pool, GFP_KERNEL,
+ &fw_ddb_dma);
+ if (fw_ddb_entry == NULL) {
+ DEBUG2(ql4_printk(KERN_ERR, ha, "Out of memory\n"));
+ goto exit_login;
+ }
+
+ if (ddb_entry->fw_ddb_index == INVALID_ENTRY) {
+ ret = qla4xxx_get_ddb_index(ha, &ddb_entry->fw_ddb_index);
+ if (ret == QLA_ERROR)
+ goto exit_login;
+
+ ha->fw_ddb_index_map[ddb_entry->fw_ddb_index] = ddb_entry;
+ ha->tot_ddbs++;
+ }
+
+ memcpy(fw_ddb_entry, &ddb_entry->fw_ddb_entry,
+ sizeof(struct dev_db_entry));
+ ddb_entry->sess->target_id = ddb_entry->fw_ddb_index;
+
+ ret = qla4xxx_set_ddb_entry(ha, ddb_entry->fw_ddb_index,
+ fw_ddb_dma, &mbx_sts);
+ if (ret == QLA_ERROR) {
+ DEBUG2(ql4_printk(KERN_ERR, ha, "Set DDB failed\n"));
+ goto exit_login;
+ }
+
+ ddb_entry->fw_ddb_device_state = DDB_DS_LOGIN_IN_PROCESS;
+ ret = qla4xxx_conn_open(ha, ddb_entry->fw_ddb_index);
+ if (ret == QLA_ERROR) {
+ ql4_printk(KERN_ERR, ha, "%s: Login failed: %s\n", __func__,
+ sess->targetname);
+ goto exit_login;
+ }
+
+exit_login:
+ if (fw_ddb_entry)
+ dma_pool_free(ha->fw_ddb_dma_pool, fw_ddb_entry, fw_ddb_dma);
+}
+