[PATCH] SharpSL: Abstract model specifics from Corgi Backlight driver
Separate out the Sharp Zaurus c7x0 series specific code from the Corgi
backlight driver. Abstract model/machine specific functions to corgi_lcd.c
via sharpsl.h
This enables the driver to be used by the Zaurus cxx00 series.
Signed-Off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index fc428b8..426c2bc 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -109,10 +109,16 @@
/*
* Corgi Backlight Device
*/
+static struct corgibl_machinfo corgi_bl_machinfo = {
+ .max_intensity = 0x2f,
+ .set_bl_intensity = corgi_bl_set_intensity,
+};
+
static struct platform_device corgibl_device = {
.name = "corgi-bl",
.dev = {
.parent = &corgifb_device.dev,
+ .platform_data = &corgi_bl_machinfo,
},
.id = -1,
};
diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c
index bfe5efc..c5efcd0 100644
--- a/arch/arm/mach-pxa/corgi_lcd.c
+++ b/arch/arm/mach-pxa/corgi_lcd.c
@@ -498,3 +498,68 @@
sharpsl_wait_sync(SPITZ_GPIO_HSYNC);
}
#endif
+
+/*
+ * Corgi/Spitz Backlight Power
+ */
+#ifdef CONFIG_PXA_SHARP_C7xx
+void corgi_bl_set_intensity(int intensity)
+{
+ if (intensity > 0x10)
+ intensity += 0x10;
+
+ /* Bits 0-4 are accessed via the SSP interface */
+ corgi_ssp_blduty_set(intensity & 0x1f);
+
+ /* Bit 5 is via SCOOP */
+ if (intensity & 0x0020)
+ set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
+ else
+ reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
+}
+#endif
+
+
+#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
+void spitz_bl_set_intensity(int intensity)
+{
+ if (intensity > 0x10)
+ intensity += 0x10;
+
+ /* Bits 0-4 are accessed via the SSP interface */
+ corgi_ssp_blduty_set(intensity & 0x1f);
+
+ /* Bit 5 is via SCOOP */
+ if (intensity & 0x0020)
+ reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
+ else
+ set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
+
+ if (intensity)
+ set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
+ else
+ reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
+}
+#endif
+
+#ifdef CONFIG_MACH_AKITA
+void akita_bl_set_intensity(int intensity)
+{
+ if (intensity > 0x10)
+ intensity += 0x10;
+
+ /* Bits 0-4 are accessed via the SSP interface */
+ corgi_ssp_blduty_set(intensity & 0x1f);
+
+ /* Bit 5 is via IO-Expander */
+ if (intensity & 0x0020)
+ akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
+ else
+ akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
+
+ if (intensity)
+ akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
+ else
+ akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
+}
+#endif
diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h
index 7007d8a..3977a77 100644
--- a/arch/arm/mach-pxa/sharpsl.h
+++ b/arch/arm/mach-pxa/sharpsl.h
@@ -15,6 +15,14 @@
void corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo);
/*
+ * SharpSL Backlight
+ */
+
+void corgi_bl_set_intensity(int intensity);
+void spitz_bl_set_intensity(int intensity);
+void akita_bl_set_intensity(int intensity);
+
+/*
* SharpSL Touchscreen Driver
*/
diff --git a/drivers/video/backlight/corgi_bl.c b/drivers/video/backlight/corgi_bl.c
index 353cb3f..a328176 100644
--- a/drivers/video/backlight/corgi_bl.c
+++ b/drivers/video/backlight/corgi_bl.c
@@ -43,18 +43,10 @@
intensity &= CORGI_LIMIT_MASK;
}
- /* Skip 0x20 as it will blank the display */
- if (intensity >= 0x20)
- intensity++;
-
spin_lock_irqsave(&bl_lock, flags);
- /* Bits 0-4 are accessed via the SSP interface */
- corgi_ssp_blduty_set(intensity & 0x1f);
- /* Bit 5 is via SCOOP */
- if (intensity & 0x0020)
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
- else
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
+
+ corgibl_mach_set_intensity(intensity);
+
spin_unlock_irqrestore(&bl_lock, flags);
}
@@ -113,8 +105,8 @@
static int corgibl_set_intensity(struct backlight_device *bd, int intensity)
{
- if (intensity > CORGI_MAX_INTENSITY)
- intensity = CORGI_MAX_INTENSITY;
+ if (intensity > corgibl_data.max_brightness)
+ intensity = corgibl_data.max_brightness;
corgibl_send_intensity(intensity);
current_intensity=intensity;
return 0;
@@ -141,7 +133,6 @@
.owner = THIS_MODULE,
.get_power = corgibl_get_power,
.set_power = corgibl_set_power,
- .max_brightness = CORGI_MAX_INTENSITY,
.get_brightness = corgibl_get_intensity,
.set_brightness = corgibl_set_intensity,
};
@@ -150,12 +141,18 @@
static int __init corgibl_probe(struct device *dev)
{
+ struct corgibl_machinfo *machinfo = dev->platform_data;
+
+ corgibl_data.max_brightness = machinfo->max_intensity;
+ corgibl_mach_set_intensity = machinfo->set_bl_intensity;
+
corgi_backlight_device = backlight_device_register ("corgi-bl",
NULL, &corgibl_data);
if (IS_ERR (corgi_backlight_device))
return PTR_ERR (corgi_backlight_device);
corgibl_set_intensity(NULL, CORGI_DEFAULT_INTENSITY);
+ corgibl_limit_intensity(0);
printk("Corgi Backlight Driver Initialized.\n");
return 0;
diff --git a/include/asm-arm/arch-pxa/sharpsl.h b/include/asm-arm/arch-pxa/sharpsl.h
index 1e1d110..311f2bb 100644
--- a/include/asm-arm/arch-pxa/sharpsl.h
+++ b/include/asm-arm/arch-pxa/sharpsl.h
@@ -20,3 +20,13 @@
void (*put_hsync)(void);
void (*wait_hsync)(void);
};
+
+/*
+ * SharpSL Backlight
+ */
+
+struct corgibl_machinfo {
+ int max_intensity;
+ void (*set_bl_intensity)(int intensity);
+};
+