Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.19 / 141168c36cdee3ff23d9c7700b0edc47cb65479f / . / drivers / edac / sb_edac.c
blob: 88df48956c1b2e83d3826d2a90191d0ee36b81e1 [file] [log] [blame]
/* Intel Sandy Bridge -EN/-EP/-EX Memory Controller kernel module
*
* This driver supports the memory controllers found on the Intel
* processor family Sandy Bridge.
*
* This file may be distributed under the terms of the
* GNU General Public License version 2 only.
*
* Copyright (c) 2011 by:
* Mauro Carvalho Chehab <mchehab@redhat.com>
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/edac.h>
#include <linux/mmzone.h>
#include <linux/smp.h>
#include <linux/bitmap.h>
#include <asm/processor.h>
#include <asm/mce.h>
#include "edac_core.h"
/* Static vars */
static LIST_HEAD(sbridge_edac_list);
static DEFINE_MUTEX(sbridge_edac_lock);
static int probed;
/*
* Alter this version for the module when modifications are made
*/
#define SBRIDGE_REVISION " Ver: 1.0.0 "
#define EDAC_MOD_STR "sbridge_edac"
/*
* Debug macros
*/
#define sbridge_printk(level, fmt, arg...) \
edac_printk(level, "sbridge", fmt, ##arg)
#define sbridge_mc_printk(mci, level, fmt, arg...) \
edac_mc_chipset_printk(mci, level, "sbridge", fmt, ##arg)
/*
* Get a bit field at register value <v>, from bit <lo> to bit <hi>
*/
#define GET_BITFIELD(v, lo, hi) \
(((v) & ((1ULL << ((hi) - (lo) + 1)) - 1) << (lo)) >> (lo))
/*
* sbridge Memory Controller Registers
*/
/*
* FIXME: For now, let's order by device function, as it makes
* easier for driver's development proccess. This table should be
* moved to pci_id.h when submitted upstream
*/
#define PCI_DEVICE_ID_INTEL_SBRIDGE_SAD0 0x3cf4 /* 12.6 */
#define PCI_DEVICE_ID_INTEL_SBRIDGE_SAD1 0x3cf6 /* 12.7 */
#define PCI_DEVICE_ID_INTEL_SBRIDGE_BR 0x3cf5 /* 13.6 */
#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_HA0 0x3ca0 /* 14.0 */
#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA 0x3ca8 /* 15.0 */
#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_RAS 0x3c71 /* 15.1 */
#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD0 0x3caa /* 15.2 */
#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD1 0x3cab /* 15.3 */
#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD2 0x3cac /* 15.4 */
#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD3 0x3cad /* 15.5 */
#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_DDRIO 0x3cb8 /* 17.0 */
/*
* Currently, unused, but will be needed in the future
* implementations, as they hold the error counters
*/
#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_ERR0 0x3c72 /* 16.2 */
#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_ERR1 0x3c73 /* 16.3 */
#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_ERR2 0x3c76 /* 16.6 */
#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_ERR3 0x3c77 /* 16.7 */
/* Devices 12 Function 6, Offsets 0x80 to 0xcc */
static const u32 dram_rule[] = {
0x80, 0x88, 0x90, 0x98, 0xa0,
0xa8, 0xb0, 0xb8, 0xc0, 0xc8,
};
#define MAX_SAD ARRAY_SIZE(dram_rule)
#define SAD_LIMIT(reg) ((GET_BITFIELD(reg, 6, 25) << 26) | 0x3ffffff)
#define DRAM_ATTR(reg) GET_BITFIELD(reg, 2, 3)
#define INTERLEAVE_MODE(reg) GET_BITFIELD(reg, 1, 1)
#define DRAM_RULE_ENABLE(reg) GET_BITFIELD(reg, 0, 0)
static char *get_dram_attr(u32 reg)
{
switch(DRAM_ATTR(reg)) {
case 0:
return "DRAM";
case 1:
return "MMCFG";
case 2:
return "NXM";
default:
return "unknown";
}
}
static const u32 interleave_list[] = {
0x84, 0x8c, 0x94, 0x9c, 0xa4,
0xac, 0xb4, 0xbc, 0xc4, 0xcc,
};
#define MAX_INTERLEAVE ARRAY_SIZE(interleave_list)
#define SAD_PKG0(reg) GET_BITFIELD(reg, 0, 2)
#define SAD_PKG1(reg) GET_BITFIELD(reg, 3, 5)
#define SAD_PKG2(reg) GET_BITFIELD(reg, 8, 10)
#define SAD_PKG3(reg) GET_BITFIELD(reg, 11, 13)
#define SAD_PKG4(reg) GET_BITFIELD(reg, 16, 18)
#define SAD_PKG5(reg) GET_BITFIELD(reg, 19, 21)
#define SAD_PKG6(reg) GET_BITFIELD(reg, 24, 26)
#define SAD_PKG7(reg) GET_BITFIELD(reg, 27, 29)
static inline int sad_pkg(u32 reg, int interleave)
{
switch (interleave) {
case 0:
return SAD_PKG0(reg);
case 1:
return SAD_PKG1(reg);
case 2:
return SAD_PKG2(reg);
case 3:
return SAD_PKG3(reg);
case 4:
return SAD_PKG4(reg);
case 5:
return SAD_PKG5(reg);
case 6:
return SAD_PKG6(reg);
case 7:
return SAD_PKG7(reg);
default:
return -EINVAL;
}
}
/* Devices 12 Function 7 */
#define TOLM 0x80
#define TOHM 0x84
#define GET_TOLM(reg) ((GET_BITFIELD(reg, 0, 3) << 28) | 0x3ffffff)
#define GET_TOHM(reg) ((GET_BITFIELD(reg, 0, 20) << 25) | 0x3ffffff)
/* Device 13 Function 6 */
#define SAD_TARGET 0xf0
#define SOURCE_ID(reg) GET_BITFIELD(reg, 9, 11)
#define SAD_CONTROL 0xf4
#define NODE_ID(reg) GET_BITFIELD(reg, 0, 2)
/* Device 14 function 0 */
static const u32 tad_dram_rule[] = {
0x40, 0x44, 0x48, 0x4c,
0x50, 0x54, 0x58, 0x5c,
0x60, 0x64, 0x68, 0x6c,
};
#define MAX_TAD ARRAY_SIZE(tad_dram_rule)
#define TAD_LIMIT(reg) ((GET_BITFIELD(reg, 12, 31) << 26) | 0x3ffffff)
#define TAD_SOCK(reg) GET_BITFIELD(reg, 10, 11)
#define TAD_CH(reg) GET_BITFIELD(reg, 8, 9)
#define TAD_TGT3(reg) GET_BITFIELD(reg, 6, 7)
#define TAD_TGT2(reg) GET_BITFIELD(reg, 4, 5)
#define TAD_TGT1(reg) GET_BITFIELD(reg, 2, 3)
#define TAD_TGT0(reg) GET_BITFIELD(reg, 0, 1)
/* Device 15, function 0 */
#define MCMTR 0x7c
#define IS_ECC_ENABLED(mcmtr) GET_BITFIELD(mcmtr, 2, 2)
#define IS_LOCKSTEP_ENABLED(mcmtr) GET_BITFIELD(mcmtr, 1, 1)
#define IS_CLOSE_PG(mcmtr) GET_BITFIELD(mcmtr, 0, 0)
/* Device 15, function 1 */
#define RASENABLES 0xac
#define IS_MIRROR_ENABLED(reg) GET_BITFIELD(reg, 0, 0)
/* Device 15, functions 2-5 */
static const int mtr_regs[] = {
0x80, 0x84, 0x88,
};
#define RANK_DISABLE(mtr) GET_BITFIELD(mtr, 16, 19)
#define IS_DIMM_PRESENT(mtr) GET_BITFIELD(mtr, 14, 14)
#define RANK_CNT_BITS(mtr) GET_BITFIELD(mtr, 12, 13)
#define RANK_WIDTH_BITS(mtr) GET_BITFIELD(mtr, 2, 4)
#define COL_WIDTH_BITS(mtr) GET_BITFIELD(mtr, 0, 1)
static const u32 tad_ch_nilv_offset[] = {
0x90, 0x94, 0x98, 0x9c,
0xa0, 0xa4, 0xa8, 0xac,
0xb0, 0xb4, 0xb8, 0xbc,
};
#define CHN_IDX_OFFSET(reg) GET_BITFIELD(reg, 28, 29)
#define TAD_OFFSET(reg) (GET_BITFIELD(reg, 6, 25) << 26)
static const u32 rir_way_limit[] = {
0x108, 0x10c, 0x110, 0x114, 0x118,
};
#define MAX_RIR_RANGES ARRAY_SIZE(rir_way_limit)
#define IS_RIR_VALID(reg) GET_BITFIELD(reg, 31, 31)
#define RIR_WAY(reg) GET_BITFIELD(reg, 28, 29)
#define RIR_LIMIT(reg) ((GET_BITFIELD(reg, 1, 10) << 29)| 0x1fffffff)
#define MAX_RIR_WAY 8
static const u32 rir_offset[MAX_RIR_RANGES][MAX_RIR_WAY] = {
{ 0x120, 0x124, 0x128, 0x12c, 0x130, 0x134, 0x138, 0x13c },
{ 0x140, 0x144, 0x148, 0x14c, 0x150, 0x154, 0x158, 0x15c },
{ 0x160, 0x164, 0x168, 0x16c, 0x170, 0x174, 0x178, 0x17c },
{ 0x180, 0x184, 0x188, 0x18c, 0x190, 0x194, 0x198, 0x19c },
{ 0x1a0, 0x1a4, 0x1a8, 0x1ac, 0x1b0, 0x1b4, 0x1b8, 0x1bc },
};
#define RIR_RNK_TGT(reg) GET_BITFIELD(reg, 16, 19)
#define RIR_OFFSET(reg) GET_BITFIELD(reg, 2, 14)
/* Device 16, functions 2-7 */
/*
* FIXME: Implement the error count reads directly
*/
static const u32 correrrcnt[] = {
0x104, 0x108, 0x10c, 0x110,
};
#define RANK_ODD_OV(reg) GET_BITFIELD(reg, 31, 31)
#define RANK_ODD_ERR_CNT(reg) GET_BITFIELD(reg, 16, 30)
#define RANK_EVEN_OV(reg) GET_BITFIELD(reg, 15, 15)
#define RANK_EVEN_ERR_CNT(reg) GET_BITFIELD(reg, 0, 14)
static const u32 correrrthrsld[] = {
0x11c, 0x120, 0x124, 0x128,
};
#define RANK_ODD_ERR_THRSLD(reg) GET_BITFIELD(reg, 16, 30)
#define RANK_EVEN_ERR_THRSLD(reg) GET_BITFIELD(reg, 0, 14)
/* Device 17, function 0 */
#define RANK_CFG_A 0x0328
#define IS_RDIMM_ENABLED(reg) GET_BITFIELD(reg, 11, 11)
/*
* sbridge structs
*/
#define NUM_CHANNELS 4
#define MAX_DIMMS 3 /* Max DIMMS per channel */
struct sbridge_info {
u32 mcmtr;
};
struct sbridge_channel {
u32 ranks;
u32 dimms;
};
struct pci_id_descr {
int dev;
int func;
int dev_id;
int optional;
};
struct pci_id_table {
const struct pci_id_descr *descr;
int n_devs;
};
struct sbridge_dev {
struct list_head list;
u8 bus, mc;
u8 node_id, source_id;
struct pci_dev **pdev;
int n_devs;
struct mem_ctl_info *mci;
};
struct sbridge_pvt {
struct pci_dev *pci_ta, *pci_ddrio, *pci_ras;
struct pci_dev *pci_sad0, *pci_sad1, *pci_ha0;
struct pci_dev *pci_br;
struct pci_dev *pci_tad[NUM_CHANNELS];
struct sbridge_dev *sbridge_dev;
struct sbridge_info info;
struct sbridge_channel channel[NUM_CHANNELS];
int csrow_map[NUM_CHANNELS][MAX_DIMMS];
/* Memory type detection */
bool is_mirrored, is_lockstep, is_close_pg;
/* Fifo double buffers */
struct mce mce_entry[MCE_LOG_LEN];
struct mce mce_outentry[MCE_LOG_LEN];
/* Fifo in/out counters */
unsigned mce_in, mce_out;
/* Count indicator to show errors not got */
unsigned mce_overrun;
/* Memory description */
u64 tolm, tohm;
};
#define PCI_DESCR(device, function, device_id) \
.dev = (device), \
.func = (function), \
.dev_id = (device_id)
static const struct pci_id_descr pci_dev_descr_sbridge[] = {
/* Processor Home Agent */
{ PCI_DESCR(14, 0, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_HA0) },
/* Memory controller */
{ PCI_DESCR(15, 0, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA) },
{ PCI_DESCR(15, 1, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_RAS) },
{ PCI_DESCR(15, 2, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD0) },
{ PCI_DESCR(15, 3, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD1) },
{ PCI_DESCR(15, 4, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD2) },
{ PCI_DESCR(15, 5, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD3) },
{ PCI_DESCR(17, 0, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_DDRIO) },
/* System Address Decoder */
{ PCI_DESCR(12, 6, PCI_DEVICE_ID_INTEL_SBRIDGE_SAD0) },
{ PCI_DESCR(12, 7, PCI_DEVICE_ID_INTEL_SBRIDGE_SAD1) },
/* Broadcast Registers */
{ PCI_DESCR(13, 6, PCI_DEVICE_ID_INTEL_SBRIDGE_BR) },
};
#define PCI_ID_TABLE_ENTRY(A) { .descr=A, .n_devs = ARRAY_SIZE(A) }
static const struct pci_id_table pci_dev_descr_sbridge_table[] = {
PCI_ID_TABLE_ENTRY(pci_dev_descr_sbridge),
{0,} /* 0 terminated list. */
};
/*
* pci_device_id table for which devices we are looking for
*/
static const struct pci_device_id sbridge_pci_tbl[] __devinitdata = {
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA)},
{0,} /* 0 terminated list. */
};
/****************************************************************************
Anciliary status routines
****************************************************************************/
static inline int numrank(u32 mtr)
{
int ranks = (1 << RANK_CNT_BITS(mtr));
if (ranks > 4) {
debugf0("Invalid number of ranks: %d (max = 4) raw value = %x (%04x)",
ranks, (unsigned int)RANK_CNT_BITS(mtr), mtr);
return -EINVAL;
}
return ranks;
}
static inline int numrow(u32 mtr)
{
int rows = (RANK_WIDTH_BITS(mtr) + 12);
if (rows < 13 || rows > 18) {
debugf0("Invalid number of rows: %d (should be between 14 and 17) raw value = %x (%04x)",
rows, (unsigned int)RANK_WIDTH_BITS(mtr), mtr);
return -EINVAL;
}
return 1 << rows;
}
static inline int numcol(u32 mtr)
{
int cols = (COL_WIDTH_BITS(mtr) + 10);
if (cols > 12) {
debugf0("Invalid number of cols: %d (max = 4) raw value = %x (%04x)",
cols, (unsigned int)COL_WIDTH_BITS(mtr), mtr);
return -EINVAL;
}
return 1 << cols;
}
static struct sbridge_dev *get_sbridge_dev(u8 bus)
{
struct sbridge_dev *sbridge_dev;
list_for_each_entry(sbridge_dev, &sbridge_edac_list, list) {
if (sbridge_dev->bus == bus)
return sbridge_dev;
}
return NULL;
}
static struct sbridge_dev *alloc_sbridge_dev(u8 bus,
const struct pci_id_table *table)
{
struct sbridge_dev *sbridge_dev;
sbridge_dev = kzalloc(sizeof(*sbridge_dev), GFP_KERNEL);
if (!sbridge_dev)
return NULL;
sbridge_dev->pdev = kzalloc(sizeof(*sbridge_dev->pdev) * table->n_devs,
GFP_KERNEL);
if (!sbridge_dev->pdev) {
kfree(sbridge_dev);
return NULL;
}
sbridge_dev->bus = bus;
sbridge_dev->n_devs = table->n_devs;
list_add_tail(&sbridge_dev->list, &sbridge_edac_list);
return sbridge_dev;
}
static void free_sbridge_dev(struct sbridge_dev *sbridge_dev)
{
list_del(&sbridge_dev->list);
kfree(sbridge_dev->pdev);
kfree(sbridge_dev);
}
/****************************************************************************
Memory check routines
****************************************************************************/
static struct pci_dev *get_pdev_slot_func(u8 bus, unsigned slot,
unsigned func)
{
struct sbridge_dev *sbridge_dev = get_sbridge_dev(bus);
int i;
if (!sbridge_dev)
return NULL;
for (i = 0; i < sbridge_dev->n_devs; i++) {
if (!sbridge_dev->pdev[i])
continue;
if (PCI_SLOT(sbridge_dev->pdev[i]->devfn) == slot &&
PCI_FUNC(sbridge_dev->pdev[i]->devfn) == func) {
debugf1("Associated %02x.%02x.%d with %p\n",
bus, slot, func, sbridge_dev->pdev[i]);
return sbridge_dev->pdev[i];
}
}
return NULL;
}
/**
* sbridge_get_active_channels() - gets the number of channels and csrows
* bus: Device bus
* @channels: Number of channels that will be returned
* @csrows: Number of csrows found
*
* Since EDAC core needs to know in advance the number of available channels
* and csrows, in order to allocate memory for csrows/channels, it is needed
* to run two similar steps. At the first step, implemented on this function,
* it checks the number of csrows/channels present at one socket, identified
* by the associated PCI bus.
* this is used in order to properly allocate the size of mci components.
* Note: one csrow is one dimm.
*/
static int sbridge_get_active_channels(const u8 bus, unsigned *channels,
unsigned *csrows)
{
struct pci_dev *pdev = NULL;
int i, j;
u32 mcmtr;
*channels = 0;
*csrows = 0;
pdev = get_pdev_slot_func(bus, 15, 0);
if (!pdev) {
sbridge_printk(KERN_ERR, "Couldn't find PCI device "
"%2x.%02d.%d!!!\n",
bus, 15, 0);
return -ENODEV;
}
pci_read_config_dword(pdev, MCMTR, &mcmtr);
if (!IS_ECC_ENABLED(mcmtr)) {
sbridge_printk(KERN_ERR, "ECC is disabled. Aborting\n");
return -ENODEV;
}
for (i = 0; i < NUM_CHANNELS; i++) {
u32 mtr;
/* Device 15 functions 2 - 5 */
pdev = get_pdev_slot_func(bus, 15, 2 + i);
if (!pdev) {
sbridge_printk(KERN_ERR, "Couldn't find PCI device "
"%2x.%02d.%d!!!\n",
bus, 15, 2 + i);
return -ENODEV;
}
(*channels)++;
for (j = 0; j < ARRAY_SIZE(mtr_regs); j++) {
pci_read_config_dword(pdev, mtr_regs[j], &mtr);
debugf1("Bus#%02x channel #%d MTR%d = %x\n", bus, i, j, mtr);
if (IS_DIMM_PRESENT(mtr))
(*csrows)++;
}
}
debugf0("Number of active channels: %d, number of active dimms: %d\n",
*channels, *csrows);
return 0;
}
static int get_dimm_config(const struct mem_ctl_info *mci)
{
struct sbridge_pvt *pvt = mci->pvt_info;
struct csrow_info *csr;
int i, j, banks, ranks, rows, cols, size, npages;
int csrow = 0;
unsigned long last_page = 0;
u32 reg;
enum edac_type mode;
enum mem_type mtype;
pci_read_config_dword(pvt->pci_br, SAD_TARGET, &reg);
pvt->sbridge_dev->source_id = SOURCE_ID(reg);
pci_read_config_dword(pvt->pci_br, SAD_CONTROL, &reg);
pvt->sbridge_dev->node_id = NODE_ID(reg);
debugf0("mc#%d: Node ID: %d, source ID: %d\n",
pvt->sbridge_dev->mc,
pvt->sbridge_dev->node_id,
pvt->sbridge_dev->source_id);
pci_read_config_dword(pvt->pci_ras, RASENABLES, &reg);
if (IS_MIRROR_ENABLED(reg)) {
debugf0("Memory mirror is enabled\n");
pvt->is_mirrored = true;
} else {
debugf0("Memory mirror is disabled\n");
pvt->is_mirrored = false;
}
pci_read_config_dword(pvt->pci_ta, MCMTR, &pvt->info.mcmtr);
if (IS_LOCKSTEP_ENABLED(pvt->info.mcmtr)) {
debugf0("Lockstep is enabled\n");
mode = EDAC_S8ECD8ED;
pvt->is_lockstep = true;
} else {
debugf0("Lockstep is disabled\n");
mode = EDAC_S4ECD4ED;
pvt->is_lockstep = false;
}
if (IS_CLOSE_PG(pvt->info.mcmtr)) {
debugf0("address map is on closed page mode\n");
pvt->is_close_pg = true;
} else {
debugf0("address map is on open page mode\n");
pvt->is_close_pg = false;
}
pci_read_config_dword(pvt->pci_ta, RANK_CFG_A, &reg);
if (IS_RDIMM_ENABLED(reg)) {
/* FIXME: Can also be LRDIMM */
debugf0("Memory is registered\n");
mtype = MEM_RDDR3;
} else {
debugf0("Memory is unregistered\n");
mtype = MEM_DDR3;
}
/* On all supported DDR3 DIMM types, there are 8 banks available */
banks = 8;
for (i = 0; i < NUM_CHANNELS; i++) {
u32 mtr;
for (j = 0; j < ARRAY_SIZE(mtr_regs); j++) {
pci_read_config_dword(pvt->pci_tad[i],
mtr_regs[j], &mtr);
debugf4("Channel #%d MTR%d = %x\n", i, j, mtr);
if (IS_DIMM_PRESENT(mtr)) {
pvt->channel[i].dimms++;
ranks = numrank(mtr);
rows = numrow(mtr);
cols = numcol(mtr);
/* DDR3 has 8 I/O banks */
size = (rows * cols * banks * ranks) >> (20 - 3);
npages = MiB_TO_PAGES(size);
debugf0("mc#%d: channel %d, dimm %d, %d Mb (%d pages) bank: %d, rank: %d, row: %#x, col: %#x\n",
pvt->sbridge_dev->mc, i, j,
size, npages,
banks, ranks, rows, cols);
csr = &mci->csrows[csrow];
csr->first_page = last_page;
csr->last_page = last_page + npages - 1;
csr->page_mask = 0UL; /* Unused */
csr->nr_pages = npages;
csr->grain = 32;
csr->csrow_idx = csrow;
csr->dtype = (banks == 8) ? DEV_X8 : DEV_X4;
csr->ce_count = 0;
csr->ue_count = 0;
csr->mtype = mtype;
csr->edac_mode = mode;
csr->nr_channels = 1;
csr->channels[0].chan_idx = i;
csr->channels[0].ce_count = 0;
pvt->csrow_map[i][j] = csrow;
snprintf(csr->channels[0].label,
sizeof(csr->channels[0].label),
"CPU_SrcID#%u_Channel#%u_DIMM#%u",
pvt->sbridge_dev->source_id, i, j);
last_page += npages;
csrow++;
}
}
}
return 0;
}
static void get_memory_layout(const struct mem_ctl_info *mci)
{
struct sbridge_pvt *pvt = mci->pvt_info;
int i, j, k, n_sads, n_tads, sad_interl;
u32 reg;
u64 limit, prv = 0;
u64 tmp_mb;
u32 rir_way;
/*
* Step 1) Get TOLM/TOHM ranges
*/
/* Address range is 32:28 */
pci_read_config_dword(pvt->pci_sad1, TOLM,
&reg);
pvt->tolm = GET_TOLM(reg);
tmp_mb = (1 + pvt->tolm) >> 20;
debugf0("TOLM: %Lu.%03Lu GB (0x%016Lx)\n",
tmp_mb / 1000, tmp_mb % 1000, (u64)pvt->tolm);
/* Address range is already 45:25 */
pci_read_config_dword(pvt->pci_sad1, TOHM,
&reg);
pvt->tohm = GET_TOHM(reg);
tmp_mb = (1 + pvt->tohm) >> 20;
debugf0("TOHM: %Lu.%03Lu GB (0x%016Lx)",
tmp_mb / 1000, tmp_mb % 1000, (u64)pvt->tohm);
/*
* Step 2) Get SAD range and SAD Interleave list
* TAD registers contain the interleave wayness. However, it
* seems simpler to just discover it indirectly, with the
* algorithm bellow.
*/
prv = 0;
for (n_sads = 0; n_sads < MAX_SAD; n_sads++) {
/* SAD_LIMIT Address range is 45:26 */
pci_read_config_dword(pvt->pci_sad0, dram_rule[n_sads],
&reg);
limit = SAD_LIMIT(reg);
if (!DRAM_RULE_ENABLE(reg))
continue;
if (limit <= prv)
break;
tmp_mb = (limit + 1) >> 20;
debugf0("SAD#%d %s up to %Lu.%03Lu GB (0x%016Lx) %s reg=0x%08x\n",
n_sads,
get_dram_attr(reg),
tmp_mb / 1000, tmp_mb % 1000,
((u64)tmp_mb) << 20L,
INTERLEAVE_MODE(reg) ? "Interleave: 8:6" : "Interleave: [8:6]XOR[18:16]",
reg);
prv = limit;
pci_read_config_dword(pvt->pci_sad0, interleave_list[n_sads],
&reg);
sad_interl = sad_pkg(reg, 0);
for (j = 0; j < 8; j++) {
if (j > 0 && sad_interl == sad_pkg(reg, j))
break;
debugf0("SAD#%d, interleave #%d: %d\n",
n_sads, j, sad_pkg(reg, j));
}
}
/*
* Step 3) Get TAD range
*/
prv = 0;
for (n_tads = 0; n_tads < MAX_TAD; n_tads++) {
pci_read_config_dword(pvt->pci_ha0, tad_dram_rule[n_tads],
&reg);
limit = TAD_LIMIT(reg);
if (limit <= prv)
break;
tmp_mb = (limit + 1) >> 20;
debugf0("TAD#%d: up to %Lu.%03Lu GB (0x%016Lx), socket interleave %d, memory interleave %d, TGT: %d, %d, %d, %d, reg=0x%08x\n",
n_tads, tmp_mb / 1000, tmp_mb % 1000,
((u64)tmp_mb) << 20L,
(u32)TAD_SOCK(reg),
(u32)TAD_CH(reg),
(u32)TAD_TGT0(reg),
(u32)TAD_TGT1(reg),
(u32)TAD_TGT2(reg),
(u32)TAD_TGT3(reg),
reg);
prv = tmp_mb;
}
/*
* Step 4) Get TAD offsets, per each channel
*/
for (i = 0; i < NUM_CHANNELS; i++) {
if (!pvt->channel[i].dimms)
continue;
for (j = 0; j < n_tads; j++) {
pci_read_config_dword(pvt->pci_tad[i],
tad_ch_nilv_offset[j],
&reg);
tmp_mb = TAD_OFFSET(reg) >> 20;
debugf0("TAD CH#%d, offset #%d: %Lu.%03Lu GB (0x%016Lx), reg=0x%08x\n",
i, j,
tmp_mb / 1000, tmp_mb % 1000,
((u64)tmp_mb) << 20L,
reg);
}
}
/*
* Step 6) Get RIR Wayness/Limit, per each channel
*/
for (i = 0; i < NUM_CHANNELS; i++) {
if (!pvt->channel[i].dimms)
continue;
for (j = 0; j < MAX_RIR_RANGES; j++) {
pci_read_config_dword(pvt->pci_tad[i],
rir_way_limit[j],
&reg);
if (!IS_RIR_VALID(reg))
continue;
tmp_mb = RIR_LIMIT(reg) >> 20;
rir_way = 1 << RIR_WAY(reg);
debugf0("CH#%d RIR#%d, limit: %Lu.%03Lu GB (0x%016Lx), way: %d, reg=0x%08x\n",
i, j,
tmp_mb / 1000, tmp_mb % 1000,
((u64)tmp_mb) << 20L,
rir_way,
reg);
for (k = 0; k < rir_way; k++) {
pci_read_config_dword(pvt->pci_tad[i],
rir_offset[j][k],
&reg);
tmp_mb = RIR_OFFSET(reg) << 6;
debugf0("CH#%d RIR#%d INTL#%d, offset %Lu.%03Lu GB (0x%016Lx), tgt: %d, reg=0x%08x\n",
i, j, k,
tmp_mb / 1000, tmp_mb % 1000,
((u64)tmp_mb) << 20L,
(u32)RIR_RNK_TGT(reg),
reg);
}
}
}
}
struct mem_ctl_info *get_mci_for_node_id(u8 node_id)
{
struct sbridge_dev *sbridge_dev;
list_for_each_entry(sbridge_dev, &sbridge_edac_list, list) {
if (sbridge_dev->node_id == node_id)
return sbridge_dev->mci;
}
return NULL;
}
static int get_memory_error_data(struct mem_ctl_info *mci,
u64 addr,
u8 *socket,
long *channel_mask,
u8 *rank,
char *area_type)
{
struct mem_ctl_info *new_mci;
struct sbridge_pvt *pvt = mci->pvt_info;
char msg[256];
int n_rir, n_sads, n_tads, sad_way, sck_xch;
int sad_interl, idx, base_ch;
int interleave_mode;
unsigned sad_interleave[MAX_INTERLEAVE];
u32 reg;
u8 ch_way,sck_way;
u32 tad_offset;
u32 rir_way;
u64 ch_addr, offset, limit, prv = 0;
/*
* Step 0) Check if the address is at special memory ranges
* The check bellow is probably enough to fill all cases where
* the error is not inside a memory, except for the legacy
* range (e. g. VGA addresses). It is unlikely, however, that the
* memory controller would generate an error on that range.
*/
if ((addr > (u64) pvt->tolm) && (addr < (1L << 32))) {
sprintf(msg, "Error at TOLM area, on addr 0x%08Lx", addr);
edac_mc_handle_ce_no_info(mci, msg);
return -EINVAL;
}
if (addr >= (u64)pvt->tohm) {
sprintf(msg, "Error at MMIOH area, on addr 0x%016Lx", addr);
edac_mc_handle_ce_no_info(mci, msg);
return -EINVAL;
}
/*
* Step 1) Get socket
*/
for (n_sads = 0; n_sads < MAX_SAD; n_sads++) {
pci_read_config_dword(pvt->pci_sad0, dram_rule[n_sads],
&reg);
if (!DRAM_RULE_ENABLE(reg))
continue;
limit = SAD_LIMIT(reg);
if (limit <= prv) {
sprintf(msg, "Can't discover the memory socket");
edac_mc_handle_ce_no_info(mci, msg);
return -EINVAL;
}
if (addr <= limit)
break;
prv = limit;
}
if (n_sads == MAX_SAD) {
sprintf(msg, "Can't discover the memory socket");
edac_mc_handle_ce_no_info(mci, msg);
return -EINVAL;
}
area_type = get_dram_attr(reg);
interleave_mode = INTERLEAVE_MODE(reg);
pci_read_config_dword(pvt->pci_sad0, interleave_list[n_sads],
&reg);
sad_interl = sad_pkg(reg, 0);
for (sad_way = 0; sad_way < 8; sad_way++) {
if (sad_way > 0 && sad_interl == sad_pkg(reg, sad_way))
break;
sad_interleave[sad_way] = sad_pkg(reg, sad_way);
debugf0("SAD interleave #%d: %d\n",
sad_way, sad_interleave[sad_way]);
}
debugf0("mc#%d: Error detected on SAD#%d: address 0x%016Lx < 0x%016Lx, Interleave [%d:6]%s\n",
pvt->sbridge_dev->mc,
n_sads,
addr,
limit,
sad_way + 7,
INTERLEAVE_MODE(reg) ? "" : "XOR[18:16]");
if (interleave_mode)
idx = ((addr >> 6) ^ (addr >> 16)) & 7;
else
idx = (addr >> 6) & 7;
switch (sad_way) {
case 1:
idx = 0;
break;
case 2:
idx = idx & 1;
break;
case 4:
idx = idx & 3;
break;
case 8:
break;
default:
sprintf(msg, "Can't discover socket interleave");
edac_mc_handle_ce_no_info(mci, msg);
return -EINVAL;
}
*socket = sad_interleave[idx];
debugf0("SAD interleave index: %d (wayness %d) = CPU socket %d\n",
idx, sad_way, *socket);
/*
* Move to the proper node structure, in order to access the
* right PCI registers
*/
new_mci = get_mci_for_node_id(*socket);
if (!new_mci) {
sprintf(msg, "Struct for socket #%u wasn't initialized",
*socket);
edac_mc_handle_ce_no_info(mci, msg);
return -EINVAL;
}
mci = new_mci;
pvt = mci->pvt_info;
/*
* Step 2) Get memory channel
*/
prv = 0;
for (n_tads = 0; n_tads < MAX_TAD; n_tads++) {
pci_read_config_dword(pvt->pci_ha0, tad_dram_rule[n_tads],
&reg);
limit = TAD_LIMIT(reg);
if (limit <= prv) {
sprintf(msg, "Can't discover the memory channel");
edac_mc_handle_ce_no_info(mci, msg);
return -EINVAL;
}
if (addr <= limit)
break;
prv = limit;
}
ch_way = TAD_CH(reg) + 1;
sck_way = TAD_SOCK(reg) + 1;
/*
* FIXME: Is it right to always use channel 0 for offsets?
*/
pci_read_config_dword(pvt->pci_tad[0],
tad_ch_nilv_offset[n_tads],
&tad_offset);
if (ch_way == 3)
idx = addr >> 6;
else
idx = addr >> (6 + sck_way);
idx = idx % ch_way;
/*
* FIXME: Shouldn't we use CHN_IDX_OFFSET() here, when ch_way == 3 ???
*/
switch (idx) {
case 0:
base_ch = TAD_TGT0(reg);
break;
case 1:
base_ch = TAD_TGT1(reg);
break;
case 2:
base_ch = TAD_TGT2(reg);
break;
case 3:
base_ch = TAD_TGT3(reg);
break;
default:
sprintf(msg, "Can't discover the TAD target");
edac_mc_handle_ce_no_info(mci, msg);
return -EINVAL;
}
*channel_mask = 1 << base_ch;
if (pvt->is_mirrored) {
*channel_mask |= 1 << ((base_ch + 2) % 4);
switch(ch_way) {
case 2:
case 4:
sck_xch = 1 << sck_way * (ch_way >> 1);
break;
default:
sprintf(msg, "Invalid mirror set. Can't decode addr");
edac_mc_handle_ce_no_info(mci, msg);
return -EINVAL;
}
} else
sck_xch = (1 << sck_way) * ch_way;
if (pvt->is_lockstep)
*channel_mask |= 1 << ((base_ch + 1) % 4);
offset = TAD_OFFSET(tad_offset);
debugf0("TAD#%d: address 0x%016Lx < 0x%016Lx, socket interleave %d, channel interleave %d (offset 0x%08Lx), index %d, base ch: %d, ch mask: 0x%02lx\n",
n_tads,
addr,
limit,
(u32)TAD_SOCK(reg),
ch_way,
offset,
idx,
base_ch,
*channel_mask);
/* Calculate channel address */
/* Remove the TAD offset */
if (offset > addr) {
sprintf(msg, "Can't calculate ch addr: TAD offset 0x%08Lx is too high for addr 0x%08Lx!",
offset, addr);
edac_mc_handle_ce_no_info(mci, msg);
return -EINVAL;
}
addr -= offset;
/* Store the low bits [0:6] of the addr */
ch_addr = addr & 0x7f;
/* Remove socket wayness and remove 6 bits */
addr >>= 6;
addr /= sck_xch;
#if 0
/* Divide by channel way */
addr = addr / ch_way;
#endif
/* Recover the last 6 bits */
ch_addr |= addr << 6;
/*
* Step 3) Decode rank
*/
for (n_rir = 0; n_rir < MAX_RIR_RANGES; n_rir++) {
pci_read_config_dword(pvt->pci_tad[base_ch],
rir_way_limit[n_rir],
&reg);
if (!IS_RIR_VALID(reg))
continue;
limit = RIR_LIMIT(reg);
debugf0("RIR#%d, limit: %Lu.%03Lu GB (0x%016Lx), way: %d\n",
n_rir,
(limit >> 20) / 1000, (limit >> 20) % 1000,
limit,
1 << RIR_WAY(reg));
if (ch_addr <= limit)
break;
}
if (n_rir == MAX_RIR_RANGES) {
sprintf(msg, "Can't discover the memory rank for ch addr 0x%08Lx",
ch_addr);
edac_mc_handle_ce_no_info(mci, msg);
return -EINVAL;
}
rir_way = RIR_WAY(reg);
if (pvt->is_close_pg)
idx = (ch_addr >> 6);
else
idx = (ch_addr >> 13); /* FIXME: Datasheet says to shift by 15 */
idx %= 1 << rir_way;
pci_read_config_dword(pvt->pci_tad[base_ch],
rir_offset[n_rir][idx],
&reg);
*rank = RIR_RNK_TGT(reg);
debugf0("RIR#%d: channel address 0x%08Lx < 0x%08Lx, RIR interleave %d, index %d\n",
n_rir,
ch_addr,
limit,
rir_way,
idx);
return 0;
}
/****************************************************************************
Device initialization routines: put/get, init/exit
****************************************************************************/
/*
* sbridge_put_all_devices 'put' all the devices that we have
* reserved via 'get'
*/
static void sbridge_put_devices(struct sbridge_dev *sbridge_dev)
{
int i;
debugf0(__FILE__ ": %s()\n", __func__);
for (i = 0; i < sbridge_dev->n_devs; i++) {
struct pci_dev *pdev = sbridge_dev->pdev[i];
if (!pdev)
continue;
debugf0("Removing dev %02x:%02x.%d\n",
pdev->bus->number,
PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
pci_dev_put(pdev);
}
}
static void sbridge_put_all_devices(void)
{
struct sbridge_dev *sbridge_dev, *tmp;
list_for_each_entry_safe(sbridge_dev, tmp, &sbridge_edac_list, list) {
sbridge_put_devices(sbridge_dev);
free_sbridge_dev(sbridge_dev);
}
}
/*
* sbridge_get_all_devices Find and perform 'get' operation on the MCH's
* device/functions we want to reference for this driver
*
* Need to 'get' device 16 func 1 and func 2
*/
static int sbridge_get_onedevice(struct pci_dev **prev,
u8 *num_mc,
const struct pci_id_table *table,
const unsigned devno)
{
struct sbridge_dev *sbridge_dev;
const struct pci_id_descr *dev_descr = &table->descr[devno];
struct pci_dev *pdev = NULL;
u8 bus = 0;
sbridge_printk(KERN_INFO,
"Seeking for: dev %02x.%d PCI ID %04x:%04x\n",
dev_descr->dev, dev_descr->func,
PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
dev_descr->dev_id, *prev);
if (!pdev) {
if (*prev) {
*prev = pdev;
return 0;
}
if (dev_descr->optional)
return 0;
if (devno == 0)
return -ENODEV;
sbridge_printk(KERN_INFO,
"Device not found: dev %02x.%d PCI ID %04x:%04x\n",
dev_descr->dev, dev_descr->func,
PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
/* End of list, leave */
return -ENODEV;
}
bus = pdev->bus->number;
sbridge_dev = get_sbridge_dev(bus);
if (!sbridge_dev) {
sbridge_dev = alloc_sbridge_dev(bus, table);
if (!sbridge_dev) {
pci_dev_put(pdev);
return -ENOMEM;
}
(*num_mc)++;
}
if (sbridge_dev->pdev[devno]) {
sbridge_printk(KERN_ERR,
"Duplicated device for "
"dev %02x:%d.%d PCI ID %04x:%04x\n",
bus, dev_descr->dev, dev_descr->func,
PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
pci_dev_put(pdev);
return -ENODEV;
}
sbridge_dev->pdev[devno] = pdev;
/* Sanity check */
if (unlikely(PCI_SLOT(pdev->devfn) != dev_descr->dev ||
PCI_FUNC(pdev->devfn) != dev_descr->func)) {
sbridge_printk(KERN_ERR,
"Device PCI ID %04x:%04x "
"has dev %02x:%d.%d instead of dev %02x:%02x.%d\n",
PCI_VENDOR_ID_INTEL, dev_descr->dev_id,
bus, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
bus, dev_descr->dev, dev_descr->func);
return -ENODEV;
}
/* Be sure that the device is enabled */
if (unlikely(pci_enable_device(pdev) < 0)) {
sbridge_printk(KERN_ERR,
"Couldn't enable "
"dev %02x:%d.%d PCI ID %04x:%04x\n",
bus, dev_descr->dev, dev_descr->func,
PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
return -ENODEV;
}
debugf0("Detected dev %02x:%d.%d PCI ID %04x:%04x\n",
bus, dev_descr->dev,
dev_descr->func,
PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
/*
* As stated on drivers/pci/search.c, the reference count for
* @from is always decremented if it is not %NULL. So, as we need
* to get all devices up to null, we need to do a get for the device
*/
pci_dev_get(pdev);
*prev = pdev;
return 0;
}
static int sbridge_get_all_devices(u8 *num_mc)
{
int i, rc;
struct pci_dev *pdev = NULL;
const struct pci_id_table *table = pci_dev_descr_sbridge_table;
while (table && table->descr) {
for (i = 0; i < table->n_devs; i++) {
pdev = NULL;
do {
rc = sbridge_get_onedevice(&pdev, num_mc,
table, i);
if (rc < 0) {
if (i == 0) {
i = table->n_devs;
break;
}
sbridge_put_all_devices();
return -ENODEV;
}
} while (pdev);
}
table++;
}
return 0;
}
static int mci_bind_devs(struct mem_ctl_info *mci,
struct sbridge_dev *sbridge_dev)
{
struct sbridge_pvt *pvt = mci->pvt_info;
struct pci_dev *pdev;
int i, func, slot;
for (i = 0; i < sbridge_dev->n_devs; i++) {
pdev = sbridge_dev->pdev[i];
if (!pdev)
continue;
slot = PCI_SLOT(pdev->devfn);
func = PCI_FUNC(pdev->devfn);
switch (slot) {
case 12:
switch (func) {
case 6:
pvt->pci_sad0 = pdev;
break;
case 7:
pvt->pci_sad1 = pdev;
break;
default:
goto error;
}
break;
case 13:
switch (func) {
case 6:
pvt->pci_br = pdev;
break;
default:
goto error;
}
break;
case 14:
switch (func) {
case 0:
pvt->pci_ha0 = pdev;
break;
default:
goto error;
}
break;
case 15:
switch (func) {
case 0:
pvt->pci_ta = pdev;
break;
case 1:
pvt->pci_ras = pdev;
break;
case 2:
case 3:
case 4:
case 5:
pvt->pci_tad[func - 2] = pdev;
break;
default:
goto error;
}
break;
case 17:
switch (func) {
case 0:
pvt->pci_ddrio = pdev;
break;
default:
goto error;
}
break;
default:
goto error;
}
debugf0("Associated PCI %02x.%02d.%d with dev = %p\n",
sbridge_dev->bus,
PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
pdev);
}
/* Check if everything were registered */
if (!pvt->pci_sad0 || !pvt->pci_sad1 || !pvt->pci_ha0 ||
!pvt-> pci_tad || !pvt->pci_ras || !pvt->pci_ta ||
!pvt->pci_ddrio)
goto enodev;
for (i = 0; i < NUM_CHANNELS; i++) {
if (!pvt->pci_tad[i])
goto enodev;
}
return 0;
enodev:
sbridge_printk(KERN_ERR, "Some needed devices are missing\n");
return -ENODEV;
error:
sbridge_printk(KERN_ERR, "Device %d, function %d "
"is out of the expected range\n",
slot, func);
return -EINVAL;
}
/****************************************************************************
Error check routines
****************************************************************************/
/*
* While Sandy Bridge has error count registers, SMI BIOS read values from
* and resets the counters. So, they are not reliable for the OS to read
* from them. So, we have no option but to just trust on whatever MCE is
* telling us about the errors.
*/
static void sbridge_mce_output_error(struct mem_ctl_info *mci,
const struct mce *m)
{
struct mem_ctl_info *new_mci;
struct sbridge_pvt *pvt = mci->pvt_info;
char *type, *optype, *msg, *recoverable_msg;
bool ripv = GET_BITFIELD(m->mcgstatus, 0, 0);
bool overflow = GET_BITFIELD(m->status, 62, 62);
bool uncorrected_error = GET_BITFIELD(m->status, 61, 61);
bool recoverable = GET_BITFIELD(m->status, 56, 56);
u32 core_err_cnt = GET_BITFIELD(m->status, 38, 52);
u32 mscod = GET_BITFIELD(m->status, 16, 31);
u32 errcode = GET_BITFIELD(m->status, 0, 15);
u32 channel = GET_BITFIELD(m->status, 0, 3);
u32 optypenum = GET_BITFIELD(m->status, 4, 6);
long channel_mask, first_channel;
u8 rank, socket;
int csrow, rc, dimm;
char *area_type = "Unknown";
if (ripv)
type = "NON_FATAL";
else
type = "FATAL";
/*
* According with Table 15-9 of the Intel Archictecture spec vol 3A,
* memory errors should fit in this mask:
* 000f 0000 1mmm cccc (binary)
* where:
* f = Correction Report Filtering Bit. If 1, subsequent errors
* won't be shown
* mmm = error type
* cccc = channel
* If the mask doesn't match, report an error to the parsing logic
*/
if (! ((errcode & 0xef80) == 0x80)) {
optype = "Can't parse: it is not a mem";
} else {
switch (optypenum) {
case 0:
optype = "generic undef request";
break;
case 1:
optype = "memory read";
break;
case 2:
optype = "memory write";
break;
case 3:
optype = "addr/cmd";
break;
case 4:
optype = "memory scrubbing";
break;
default:
optype = "reserved";
break;
}
}
rc = get_memory_error_data(mci, m->addr, &socket,
&channel_mask, &rank, area_type);
if (rc < 0)
return;
new_mci = get_mci_for_node_id(socket);
if (!new_mci) {
edac_mc_handle_ce_no_info(mci, "Error: socket got corrupted!");
return;
}
mci = new_mci;
pvt = mci->pvt_info;
first_channel = find_first_bit(&channel_mask, NUM_CHANNELS);
if (rank < 4)
dimm = 0;
else if (rank < 8)
dimm = 1;
else
dimm = 2;
csrow = pvt->csrow_map[first_channel][dimm];
if (uncorrected_error && recoverable)
recoverable_msg = " recoverable";
else
recoverable_msg = "";
/*
* FIXME: What should we do with "channel" information on mcelog?
* Probably, we can just discard it, as the channel information
* comes from the get_memory_error_data() address decoding
*/
msg = kasprintf(GFP_ATOMIC,
"%d %s error(s): %s on %s area %s%s: cpu=%d Err=%04x:%04x (ch=%d), "
"addr = 0x%08llx => socket=%d, Channel=%ld(mask=%ld), rank=%d\n",
core_err_cnt,
area_type,
optype,
type,
recoverable_msg,
overflow ? "OVERFLOW" : "",
m->cpu,
mscod, errcode,
channel, /* 1111b means not specified */
(long long) m->addr,
socket,
first_channel, /* This is the real channel on SB */
channel_mask,
rank);
debugf0("%s", msg);
/* Call the helper to output message */
if (uncorrected_error)
edac_mc_handle_fbd_ue(mci, csrow, 0, 0, msg);
else
edac_mc_handle_fbd_ce(mci, csrow, 0, msg);
kfree(msg);
}
/*
* sbridge_check_error Retrieve and process errors reported by the
* hardware. Called by the Core module.
*/
static void sbridge_check_error(struct mem_ctl_info *mci)
{
struct sbridge_pvt *pvt = mci->pvt_info;
int i;
unsigned count = 0;
struct mce *m;
/*
* MCE first step: Copy all mce errors into a temporary buffer
* We use a double buffering here, to reduce the risk of
* loosing an error.
*/
smp_rmb();
count = (pvt->mce_out + MCE_LOG_LEN - pvt->mce_in)
% MCE_LOG_LEN;
if (!count)
return;
m = pvt->mce_outentry;
if (pvt->mce_in + count > MCE_LOG_LEN) {
unsigned l = MCE_LOG_LEN - pvt->mce_in;
memcpy(m, &pvt->mce_entry[pvt->mce_in], sizeof(*m) * l);
smp_wmb();
pvt->mce_in = 0;
count -= l;
m += l;
}
memcpy(m, &pvt->mce_entry[pvt->mce_in], sizeof(*m) * count);
smp_wmb();
pvt->mce_in += count;
smp_rmb();
if (pvt->mce_overrun) {
sbridge_printk(KERN_ERR, "Lost %d memory errors\n",
pvt->mce_overrun);
smp_wmb();
pvt->mce_overrun = 0;
}
/*
* MCE second step: parse errors and display
*/
for (i = 0; i < count; i++)
sbridge_mce_output_error(mci, &pvt->mce_outentry[i]);
}
/*
* sbridge_mce_check_error Replicates mcelog routine to get errors
* This routine simply queues mcelog errors, and
* return. The error itself should be handled later
* by sbridge_check_error.
* WARNING: As this routine should be called at NMI time, extra care should
* be taken to avoid deadlocks, and to be as fast as possible.
*/
static int sbridge_mce_check_error(struct notifier_block *nb, unsigned long val,
void *data)
{
struct mce *mce = (struct mce *)data;
struct mem_ctl_info *mci;
struct sbridge_pvt *pvt;
mci = get_mci_for_node_id(mce->socketid);
if (!mci)
return NOTIFY_BAD;
pvt = mci->pvt_info;
/*
* Just let mcelog handle it if the error is
* outside the memory controller. A memory error
* is indicated by bit 7 = 1 and bits = 8-11,13-15 = 0.
* bit 12 has an special meaning.
*/
if ((mce->status & 0xefff) >> 7 != 1)
return NOTIFY_DONE;
printk("sbridge: HANDLING MCE MEMORY ERROR\n");
printk("CPU %d: Machine Check Exception: %Lx Bank %d: %016Lx\n",
mce->extcpu, mce->mcgstatus, mce->bank, mce->status);
printk("TSC %llx ", mce->tsc);
printk("ADDR %llx ", mce->addr);
printk("MISC %llx ", mce->misc);
printk("PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
mce->cpuvendor, mce->cpuid, mce->time,
mce->socketid, mce->apicid);
/* Only handle if it is the right mc controller */
if (cpu_data(mce->cpu).phys_proc_id != pvt->sbridge_dev->mc)
return NOTIFY_DONE;
smp_rmb();
if ((pvt->mce_out + 1) % MCE_LOG_LEN == pvt->mce_in) {
smp_wmb();
pvt->mce_overrun++;
return NOTIFY_DONE;
}
/* Copy memory error at the ringbuffer */
memcpy(&pvt->mce_entry[pvt->mce_out], mce, sizeof(*mce));
smp_wmb();
pvt->mce_out = (pvt->mce_out + 1) % MCE_LOG_LEN;
/* Handle fatal errors immediately */
if (mce->mcgstatus & 1)
sbridge_check_error(mci);
/* Advice mcelog that the error were handled */
return NOTIFY_STOP;
}
static struct notifier_block sbridge_mce_dec = {
.notifier_call = sbridge_mce_check_error,
};
/****************************************************************************
EDAC register/unregister logic
****************************************************************************/
static void sbridge_unregister_mci(struct sbridge_dev *sbridge_dev)
{
struct mem_ctl_info *mci = sbridge_dev->mci;
struct sbridge_pvt *pvt;
if (unlikely(!mci || !mci->pvt_info)) {
debugf0("MC: " __FILE__ ": %s(): dev = %p\n",
__func__, &sbridge_dev->pdev[0]->dev);
sbridge_printk(KERN_ERR, "Couldn't find mci handler\n");
return;
}
pvt = mci->pvt_info;
debugf0("MC: " __FILE__ ": %s(): mci = %p, dev = %p\n",
__func__, mci, &sbridge_dev->pdev[0]->dev);
atomic_notifier_chain_unregister(&x86_mce_decoder_chain,
&sbridge_mce_dec);
/* Remove MC sysfs nodes */
edac_mc_del_mc(mci->dev);
debugf1("%s: free mci struct\n", mci->ctl_name);
kfree(mci->ctl_name);
edac_mc_free(mci);
sbridge_dev->mci = NULL;
}
static int sbridge_register_mci(struct sbridge_dev *sbridge_dev)
{
struct mem_ctl_info *mci;
struct sbridge_pvt *pvt;
int rc, channels, csrows;
/* Check the number of active and not disabled channels */
rc = sbridge_get_active_channels(sbridge_dev->bus, &channels, &csrows);
if (unlikely(rc < 0))
return rc;
/* allocate a new MC control structure */
mci = edac_mc_alloc(sizeof(*pvt), csrows, channels, sbridge_dev->mc);
if (unlikely(!mci))
return -ENOMEM;
debugf0("MC: " __FILE__ ": %s(): mci = %p, dev = %p\n",
__func__, mci, &sbridge_dev->pdev[0]->dev);
pvt = mci->pvt_info;
memset(pvt, 0, sizeof(*pvt));
/* Associate sbridge_dev and mci for future usage */
pvt->sbridge_dev = sbridge_dev;
sbridge_dev->mci = mci;
mci->mtype_cap = MEM_FLAG_DDR3;
mci->edac_ctl_cap = EDAC_FLAG_NONE;
mci->edac_cap = EDAC_FLAG_NONE;
mci->mod_name = "sbridge_edac.c";
mci->mod_ver = SBRIDGE_REVISION;
mci->ctl_name = kasprintf(GFP_KERNEL, "Sandy Bridge Socket#%d", mci->mc_idx);
mci->dev_name = pci_name(sbridge_dev->pdev[0]);
mci->ctl_page_to_phys = NULL;
/* Set the function pointer to an actual operation function */
mci->edac_check = sbridge_check_error;
/* Store pci devices at mci for faster access */
rc = mci_bind_devs(mci, sbridge_dev);
if (unlikely(rc < 0))
goto fail0;
/* Get dimm basic config and the memory layout */
get_dimm_config(mci);
get_memory_layout(mci);
/* record ptr to the generic device */
mci->dev = &sbridge_dev->pdev[0]->dev;
/* add this new MC control structure to EDAC's list of MCs */
if (unlikely(edac_mc_add_mc(mci))) {
debugf0("MC: " __FILE__
": %s(): failed edac_mc_add_mc()\n", __func__);
rc = -EINVAL;
goto fail0;
}
atomic_notifier_chain_register(&x86_mce_decoder_chain,
&sbridge_mce_dec);
return 0;
fail0:
kfree(mci->ctl_name);
edac_mc_free(mci);
sbridge_dev->mci = NULL;
return rc;
}
/*
* sbridge_probe Probe for ONE instance of device to see if it is
* present.
* return:
* 0 for FOUND a device
* < 0 for error code
*/
static int __devinit sbridge_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
int rc;
u8 mc, num_mc = 0;
struct sbridge_dev *sbridge_dev;
/* get the pci devices we want to reserve for our use */
mutex_lock(&sbridge_edac_lock);
/*
* All memory controllers are allocated at the first pass.
*/
if (unlikely(probed >= 1)) {
mutex_unlock(&sbridge_edac_lock);
return -ENODEV;
}
probed++;
rc = sbridge_get_all_devices(&num_mc);
if (unlikely(rc < 0))
goto fail0;
mc = 0;
list_for_each_entry(sbridge_dev, &sbridge_edac_list, list) {
debugf0("Registering MC#%d (%d of %d)\n", mc, mc + 1, num_mc);
sbridge_dev->mc = mc++;
rc = sbridge_register_mci(sbridge_dev);
if (unlikely(rc < 0))
goto fail1;
}
sbridge_printk(KERN_INFO, "Driver loaded.\n");
mutex_unlock(&sbridge_edac_lock);
return 0;
fail1:
list_for_each_entry(sbridge_dev, &sbridge_edac_list, list)
sbridge_unregister_mci(sbridge_dev);
sbridge_put_all_devices();
fail0:
mutex_unlock(&sbridge_edac_lock);
return rc;
}
/*
* sbridge_remove destructor for one instance of device
*
*/
static void __devexit sbridge_remove(struct pci_dev *pdev)
{
struct sbridge_dev *sbridge_dev;
debugf0(__FILE__ ": %s()\n", __func__);
/*
* we have a trouble here: pdev value for removal will be wrong, since
* it will point to the X58 register used to detect that the machine
* is a Nehalem or upper design. However, due to the way several PCI
* devices are grouped together to provide MC functionality, we need
* to use a different method for releasing the devices
*/
mutex_lock(&sbridge_edac_lock);
if (unlikely(!probed)) {
mutex_unlock(&sbridge_edac_lock);
return;
}
list_for_each_entry(sbridge_dev, &sbridge_edac_list, list)
sbridge_unregister_mci(sbridge_dev);
/* Release PCI resources */
sbridge_put_all_devices();
probed--;
mutex_unlock(&sbridge_edac_lock);
}
MODULE_DEVICE_TABLE(pci, sbridge_pci_tbl);
/*
* sbridge_driver pci_driver structure for this module
*
*/
static struct pci_driver sbridge_driver = {
.name = "sbridge_edac",
.probe = sbridge_probe,
.remove = __devexit_p(sbridge_remove),
.id_table = sbridge_pci_tbl,
};
/*
* sbridge_init Module entry function
* Try to initialize this module for its devices
*/
static int __init sbridge_init(void)
{
int pci_rc;
debugf2("MC: " __FILE__ ": %s()\n", __func__);
/* Ensure that the OPSTATE is set correctly for POLL or NMI */
opstate_init();
pci_rc = pci_register_driver(&sbridge_driver);
if (pci_rc >= 0)
return 0;
sbridge_printk(KERN_ERR, "Failed to register device with error %d.\n",
pci_rc);
return pci_rc;
}
/*
* sbridge_exit() Module exit function
* Unregister the driver
*/
static void __exit sbridge_exit(void)
{
debugf2("MC: " __FILE__ ": %s()\n", __func__);
pci_unregister_driver(&sbridge_driver);
}
module_init(sbridge_init);
module_exit(sbridge_exit);
module_param(edac_op_state, int, 0444);
MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
MODULE_DESCRIPTION("MC Driver for Intel Sandy Bridge memory controllers - "
SBRIDGE_REVISION);