OMAPDSS: NEC-nl8048hl11: remove platform backlight support
NEC-nl8048hl11 driver contains support to call platform backlight
functions. These are not used by any board, and can be removed.
Signed-off-by: Archit Taneja <archit@ti.com>
diff --git a/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c b/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c
index c4e9c2b..c197927 100644
--- a/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c
+++ b/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c
@@ -19,7 +19,6 @@
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/spi/spi.h>
-#include <linux/backlight.h>
#include <linux/fb.h>
#include <video/omapdss.h>
@@ -33,7 +32,6 @@
#define LCD_PIXEL_CLOCK 23800
struct nec_8048_data {
- struct backlight_device *bl;
};
static const struct {
@@ -84,43 +82,9 @@
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
};
-static int nec_8048_bl_update_status(struct backlight_device *bl)
-{
- struct omap_dss_device *dssdev = dev_get_drvdata(&bl->dev);
- int level;
-
- if (!dssdev->set_backlight)
- return -EINVAL;
-
- if (bl->props.fb_blank == FB_BLANK_UNBLANK &&
- bl->props.power == FB_BLANK_UNBLANK)
- level = bl->props.brightness;
- else
- level = 0;
-
- return dssdev->set_backlight(dssdev, level);
-}
-
-static int nec_8048_bl_get_brightness(struct backlight_device *bl)
-{
- if (bl->props.fb_blank == FB_BLANK_UNBLANK &&
- bl->props.power == FB_BLANK_UNBLANK)
- return bl->props.brightness;
-
- return 0;
-}
-
-static const struct backlight_ops nec_8048_bl_ops = {
- .get_brightness = nec_8048_bl_get_brightness,
- .update_status = nec_8048_bl_update_status,
-};
-
static int nec_8048_panel_probe(struct omap_dss_device *dssdev)
{
- struct backlight_device *bl;
struct nec_8048_data *necd;
- struct backlight_properties props;
- int r;
dssdev->panel.timings = nec_8048_panel_timings;
@@ -130,38 +94,12 @@
dev_set_drvdata(&dssdev->dev, necd);
- memset(&props, 0, sizeof(struct backlight_properties));
- props.max_brightness = 255;
-
- bl = backlight_device_register("nec-8048", &dssdev->dev, dssdev,
- &nec_8048_bl_ops, &props);
- if (IS_ERR(bl)) {
- r = PTR_ERR(bl);
- kfree(necd);
- return r;
- }
- necd->bl = bl;
-
- bl->props.fb_blank = FB_BLANK_UNBLANK;
- bl->props.power = FB_BLANK_UNBLANK;
- bl->props.max_brightness = dssdev->max_backlight_level;
- bl->props.brightness = dssdev->max_backlight_level;
-
- r = nec_8048_bl_update_status(bl);
- if (r < 0)
- dev_err(&dssdev->dev, "failed to set lcd brightness\n");
-
return 0;
}
static void nec_8048_panel_remove(struct omap_dss_device *dssdev)
{
struct nec_8048_data *necd = dev_get_drvdata(&dssdev->dev);
- struct backlight_device *bl = necd->bl;
-
- bl->props.power = FB_BLANK_POWERDOWN;
- nec_8048_bl_update_status(bl);
- backlight_device_unregister(bl);
kfree(necd);
}
@@ -169,8 +107,6 @@
static int nec_8048_panel_power_on(struct omap_dss_device *dssdev)
{
int r;
- struct nec_8048_data *necd = dev_get_drvdata(&dssdev->dev);
- struct backlight_device *bl = necd->bl;
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
return 0;
@@ -188,10 +124,6 @@
goto err1;
}
- r = nec_8048_bl_update_status(bl);
- if (r < 0)
- dev_err(&dssdev->dev, "failed to set lcd brightness\n");
-
return 0;
err1:
omapdss_dpi_display_disable(dssdev);
@@ -201,15 +133,9 @@
static void nec_8048_panel_power_off(struct omap_dss_device *dssdev)
{
- struct nec_8048_data *necd = dev_get_drvdata(&dssdev->dev);
- struct backlight_device *bl = necd->bl;
-
if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
return;
- bl->props.brightness = 0;
- nec_8048_bl_update_status(bl);
-
if (dssdev->platform_disable)
dssdev->platform_disable(dssdev);