xhci: Add new short TX quirk for Fresco Logic host.
Sergio reported that when he recorded audio from a USB headset mic
plugged into the USB 3.0 port on his ASUS N53SV-DH72, the audio sounded
"robotic". When plugged into the USB 2.0 port under EHCI on the same
laptop, the audio sounded fine. The device is:
Bus 002 Device 004: ID 046d:0a0c Logitech, Inc. Clear Chat Comfort USB Headset
The problem was tracked down to the Fresco Logic xHCI host controller
not correctly reporting short transfers on isochronous IN endpoints.
The driver would submit a 96 byte transfer, the device would only send
88 or 90 bytes, and the xHCI host would report the transfer had a
"successful" completion code, with an untransferred buffer length of 8
or 6 bytes.
The successful completion code and non-zero untransferred length is a
contradiction. The xHCI host is supposed to only mark a transfer as
successful if all the bytes are transferred. Otherwise, the transfer
should be marked with a short packet completion code. Without the EHCI
bus trace, we wouldn't know whether the xHCI driver should trust the
completion code or the untransferred length. With it, we know to trust
the untransferred length.
Add a new xHCI quirk for the Fresco Logic host controller. If a
transfer is reported as successful, but the untransferred length is
non-zero, print a warning. For the Fresco Logic host, change the
completion code to COMP_SHORT_TX and process the transfer like a short
transfer.
This should be backported to stable kernels that contain the commit
f5182b4155b9d686c5540a6822486400e34ddd98 "xhci: Disable MSI for some
Fresco Logic hosts." That commit was marked for stable kernels as old
as 2.6.36.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Sergio Correia <lists@uece.net>
Tested-by: Sergio Correia <lists@uece.net>
Cc: stable@vger.kernel.org
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 329fd2a..c60617b 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1787,8 +1787,12 @@
/* handle completion code */
switch (trb_comp_code) {
case COMP_SUCCESS:
- frame->status = 0;
- break;
+ if (TRB_LEN(le32_to_cpu(event->transfer_len)) == 0) {
+ frame->status = 0;
+ break;
+ }
+ if ((xhci->quirks & XHCI_TRUST_TX_LENGTH))
+ trb_comp_code = COMP_SHORT_TX;
case COMP_SHORT_TX:
frame->status = td->urb->transfer_flags & URB_SHORT_NOT_OK ?
-EREMOTEIO : 0;
@@ -1885,13 +1889,16 @@
switch (trb_comp_code) {
case COMP_SUCCESS:
/* Double check that the HW transferred everything. */
- if (event_trb != td->last_trb) {
+ if (event_trb != td->last_trb ||
+ TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
xhci_warn(xhci, "WARN Successful completion "
"on short TX\n");
if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
*status = -EREMOTEIO;
else
*status = 0;
+ if ((xhci->quirks & XHCI_TRUST_TX_LENGTH))
+ trb_comp_code = COMP_SHORT_TX;
} else {
*status = 0;
}
@@ -2050,6 +2057,13 @@
* transfer type
*/
case COMP_SUCCESS:
+ if (TRB_LEN(le32_to_cpu(event->transfer_len)) == 0)
+ break;
+ if (xhci->quirks & XHCI_TRUST_TX_LENGTH)
+ trb_comp_code = COMP_SHORT_TX;
+ else
+ xhci_warn(xhci, "WARN Successful completion on short TX: "
+ "needs XHCI_TRUST_TX_LENGTH quirk?\n");
case COMP_SHORT_TX:
break;
case COMP_STOP: