rapidio: fix destructive port EM initialization for Tsi568
Replace possibly damaging broadcast writes into the per-port SP_MODE
registers with individual writes for each port. This will preserve
individual port configurations in case if ports are configured
differently.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/rapidio/switches/tsi568.c b/drivers/rapidio/switches/tsi568.c
index f7fd789..b9a389b 100644
--- a/drivers/rapidio/switches/tsi568.c
+++ b/drivers/rapidio/switches/tsi568.c
@@ -29,7 +29,7 @@
#define SPP_ROUTE_CFG_DESTID(n) (0x11070 + 0x100*n)
#define SPP_ROUTE_CFG_PORT(n) (0x11074 + 0x100*n)
-#define TSI568_SP_MODE_BC 0x10004
+#define TSI568_SP_MODE(n) (0x11004 + 0x100*n)
#define TSI568_SP_MODE_PW_DIS 0x08000000
static int
@@ -117,14 +117,19 @@
u16 destid = rdev->rswitch->destid;
u8 hopcount = rdev->rswitch->hopcount;
u32 regval;
+ int portnum;
pr_debug("TSI568 %s [%d:%d]\n", __func__, destid, hopcount);
/* Make sure that Port-Writes are disabled (for all ports) */
- rio_mport_read_config_32(mport, destid, hopcount,
- TSI568_SP_MODE_BC, ®val);
- rio_mport_write_config_32(mport, destid, hopcount,
- TSI568_SP_MODE_BC, regval | TSI568_SP_MODE_PW_DIS);
+ for (portnum = 0;
+ portnum < RIO_GET_TOTAL_PORTS(rdev->swpinfo); portnum++) {
+ rio_mport_read_config_32(mport, destid, hopcount,
+ TSI568_SP_MODE(portnum), ®val);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ TSI568_SP_MODE(portnum),
+ regval | TSI568_SP_MODE_PW_DIS);
+ }
return 0;
}