| /* |
| * arizona-ldo1.c -- LDO1 supply for Arizona devices |
| * |
| * Copyright 2012 Wolfson Microelectronics PLC. |
| * |
| * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/bitops.h> |
| #include <linux/err.h> |
| #include <linux/of.h> |
| #include <linux/of_gpio.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/regulator/of_regulator.h> |
| #include <linux/gpio.h> |
| #include <linux/slab.h> |
| |
| #include <linux/mfd/arizona/core.h> |
| #include <linux/mfd/arizona/pdata.h> |
| #include <linux/mfd/arizona/registers.h> |
| |
| struct arizona_ldo1 { |
| struct regulator_dev *regulator; |
| struct arizona *arizona; |
| |
| struct regulator_consumer_supply supply; |
| struct regulator_init_data init_data; |
| }; |
| |
| static int arizona_ldo1_hc_list_voltage(struct regulator_dev *rdev, |
| unsigned int selector) |
| { |
| if (selector >= rdev->desc->n_voltages) |
| return -EINVAL; |
| |
| if (selector == rdev->desc->n_voltages - 1) |
| return 1800000; |
| else |
| return rdev->desc->min_uV + (rdev->desc->uV_step * selector); |
| } |
| |
| static int arizona_ldo1_hc_map_voltage(struct regulator_dev *rdev, |
| int min_uV, int max_uV) |
| { |
| int sel; |
| |
| sel = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step); |
| if (sel >= rdev->desc->n_voltages) |
| sel = rdev->desc->n_voltages - 1; |
| |
| return sel; |
| } |
| |
| static int arizona_ldo1_hc_set_voltage_sel(struct regulator_dev *rdev, |
| unsigned sel) |
| { |
| struct arizona_ldo1 *ldo = rdev_get_drvdata(rdev); |
| struct regmap *regmap = ldo->arizona->regmap; |
| unsigned int val; |
| int ret; |
| |
| if (sel == rdev->desc->n_voltages - 1) |
| val = ARIZONA_LDO1_HI_PWR; |
| else |
| val = 0; |
| |
| ret = regmap_update_bits(regmap, ARIZONA_LDO1_CONTROL_2, |
| ARIZONA_LDO1_HI_PWR, val); |
| if (ret != 0) |
| return ret; |
| |
| if (val) |
| return 0; |
| |
| val = sel << ARIZONA_LDO1_VSEL_SHIFT; |
| |
| return regmap_update_bits(regmap, ARIZONA_LDO1_CONTROL_1, |
| ARIZONA_LDO1_VSEL_MASK, val); |
| } |
| |
| static int arizona_ldo1_hc_get_voltage_sel(struct regulator_dev *rdev) |
| { |
| struct arizona_ldo1 *ldo = rdev_get_drvdata(rdev); |
| struct regmap *regmap = ldo->arizona->regmap; |
| unsigned int val; |
| int ret; |
| |
| ret = regmap_read(regmap, ARIZONA_LDO1_CONTROL_2, &val); |
| if (ret != 0) |
| return ret; |
| |
| if (val & ARIZONA_LDO1_HI_PWR) |
| return rdev->desc->n_voltages - 1; |
| |
| ret = regmap_read(regmap, ARIZONA_LDO1_CONTROL_1, &val); |
| if (ret != 0) |
| return ret; |
| |
| return (val & ARIZONA_LDO1_VSEL_MASK) >> ARIZONA_LDO1_VSEL_SHIFT; |
| } |
| |
| static struct regulator_ops arizona_ldo1_hc_ops = { |
| .list_voltage = arizona_ldo1_hc_list_voltage, |
| .map_voltage = arizona_ldo1_hc_map_voltage, |
| .get_voltage_sel = arizona_ldo1_hc_get_voltage_sel, |
| .set_voltage_sel = arizona_ldo1_hc_set_voltage_sel, |
| .get_bypass = regulator_get_bypass_regmap, |
| .set_bypass = regulator_set_bypass_regmap, |
| }; |
| |
| static const struct regulator_desc arizona_ldo1_hc = { |
| .name = "LDO1", |
| .supply_name = "LDOVDD", |
| .type = REGULATOR_VOLTAGE, |
| .ops = &arizona_ldo1_hc_ops, |
| |
| .bypass_reg = ARIZONA_LDO1_CONTROL_1, |
| .bypass_mask = ARIZONA_LDO1_BYPASS, |
| .min_uV = 900000, |
| .uV_step = 50000, |
| .n_voltages = 8, |
| .enable_time = 1500, |
| .ramp_delay = 24000, |
| |
| .owner = THIS_MODULE, |
| }; |
| |
| static struct regulator_ops arizona_ldo1_ops = { |
| .list_voltage = regulator_list_voltage_linear, |
| .map_voltage = regulator_map_voltage_linear, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| }; |
| |
| static const struct regulator_desc arizona_ldo1 = { |
| .name = "LDO1", |
| .supply_name = "LDOVDD", |
| .type = REGULATOR_VOLTAGE, |
| .ops = &arizona_ldo1_ops, |
| |
| .vsel_reg = ARIZONA_LDO1_CONTROL_1, |
| .vsel_mask = ARIZONA_LDO1_VSEL_MASK, |
| .min_uV = 900000, |
| .uV_step = 25000, |
| .n_voltages = 13, |
| .enable_time = 500, |
| .ramp_delay = 24000, |
| |
| .owner = THIS_MODULE, |
| }; |
| |
| static const struct regulator_init_data arizona_ldo1_dvfs = { |
| .constraints = { |
| .min_uV = 1200000, |
| .max_uV = 1800000, |
| .valid_ops_mask = REGULATOR_CHANGE_STATUS | |
| REGULATOR_CHANGE_VOLTAGE, |
| }, |
| .num_consumer_supplies = 1, |
| }; |
| |
| static const struct regulator_init_data arizona_ldo1_default = { |
| .constraints = { |
| .valid_ops_mask = REGULATOR_CHANGE_STATUS, |
| }, |
| .num_consumer_supplies = 1, |
| }; |
| |
| static const struct regulator_init_data arizona_ldo1_wm5110 = { |
| .constraints = { |
| .min_uV = 1175000, |
| .max_uV = 1200000, |
| .valid_ops_mask = REGULATOR_CHANGE_STATUS | |
| REGULATOR_CHANGE_VOLTAGE, |
| }, |
| .num_consumer_supplies = 1, |
| }; |
| |
| static int arizona_ldo1_of_get_pdata(struct arizona *arizona, |
| struct regulator_config *config, |
| const struct regulator_desc *desc) |
| { |
| struct arizona_pdata *pdata = &arizona->pdata; |
| struct arizona_ldo1 *ldo1 = config->driver_data; |
| struct device_node *np = arizona->dev->of_node; |
| struct device_node *init_node, *dcvdd_node; |
| struct regulator_init_data *init_data; |
| |
| pdata->ldoena = of_get_named_gpio(np, "wlf,ldoena", 0); |
| if (pdata->ldoena < 0) { |
| dev_warn(arizona->dev, |
| "LDOENA GPIO property missing/malformed: %d\n", |
| pdata->ldoena); |
| pdata->ldoena = 0; |
| } else { |
| config->ena_gpio_initialized = true; |
| } |
| |
| init_node = of_get_child_by_name(np, "ldo1"); |
| dcvdd_node = of_parse_phandle(np, "DCVDD-supply", 0); |
| |
| if (init_node) { |
| config->of_node = init_node; |
| |
| init_data = of_get_regulator_init_data(arizona->dev, init_node, |
| desc); |
| |
| if (init_data) { |
| init_data->consumer_supplies = &ldo1->supply; |
| init_data->num_consumer_supplies = 1; |
| |
| if (dcvdd_node && dcvdd_node != init_node) |
| arizona->external_dcvdd = true; |
| |
| pdata->ldo1 = init_data; |
| } |
| } else if (dcvdd_node) { |
| arizona->external_dcvdd = true; |
| } |
| |
| of_node_put(dcvdd_node); |
| |
| return 0; |
| } |
| |
| static int arizona_ldo1_probe(struct platform_device *pdev) |
| { |
| struct arizona *arizona = dev_get_drvdata(pdev->dev.parent); |
| const struct regulator_desc *desc; |
| struct regulator_config config = { }; |
| struct arizona_ldo1 *ldo1; |
| int ret; |
| |
| arizona->external_dcvdd = false; |
| |
| ldo1 = devm_kzalloc(&pdev->dev, sizeof(*ldo1), GFP_KERNEL); |
| if (!ldo1) |
| return -ENOMEM; |
| |
| ldo1->arizona = arizona; |
| |
| /* |
| * Since the chip usually supplies itself we provide some |
| * default init_data for it. This will be overridden with |
| * platform data if provided. |
| */ |
| switch (arizona->type) { |
| case WM5102: |
| case WM8997: |
| case WM8998: |
| case WM1814: |
| desc = &arizona_ldo1_hc; |
| ldo1->init_data = arizona_ldo1_dvfs; |
| break; |
| case WM5110: |
| case WM8280: |
| desc = &arizona_ldo1; |
| ldo1->init_data = arizona_ldo1_wm5110; |
| break; |
| default: |
| desc = &arizona_ldo1; |
| ldo1->init_data = arizona_ldo1_default; |
| break; |
| } |
| |
| ldo1->init_data.consumer_supplies = &ldo1->supply; |
| ldo1->supply.supply = "DCVDD"; |
| ldo1->supply.dev_name = dev_name(arizona->dev); |
| |
| config.dev = arizona->dev; |
| config.driver_data = ldo1; |
| config.regmap = arizona->regmap; |
| |
| if (IS_ENABLED(CONFIG_OF)) { |
| if (!dev_get_platdata(arizona->dev)) { |
| ret = arizona_ldo1_of_get_pdata(arizona, &config, desc); |
| if (ret < 0) |
| return ret; |
| } |
| } |
| |
| config.ena_gpio = arizona->pdata.ldoena; |
| |
| if (arizona->pdata.ldo1) |
| config.init_data = arizona->pdata.ldo1; |
| else |
| config.init_data = &ldo1->init_data; |
| |
| /* |
| * LDO1 can only be used to supply DCVDD so if it has no |
| * consumers then DCVDD is supplied externally. |
| */ |
| if (config.init_data->num_consumer_supplies == 0) |
| arizona->external_dcvdd = true; |
| |
| ldo1->regulator = devm_regulator_register(&pdev->dev, desc, &config); |
| |
| of_node_put(config.of_node); |
| |
| if (IS_ERR(ldo1->regulator)) { |
| ret = PTR_ERR(ldo1->regulator); |
| dev_err(arizona->dev, "Failed to register LDO1 supply: %d\n", |
| ret); |
| return ret; |
| } |
| |
| platform_set_drvdata(pdev, ldo1); |
| |
| return 0; |
| } |
| |
| static struct platform_driver arizona_ldo1_driver = { |
| .probe = arizona_ldo1_probe, |
| .driver = { |
| .name = "arizona-ldo1", |
| }, |
| }; |
| |
| module_platform_driver(arizona_ldo1_driver); |
| |
| /* Module information */ |
| MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); |
| MODULE_DESCRIPTION("Arizona LDO1 driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:arizona-ldo1"); |