| /* |
| * |
| * Hardware accelerated Matrox Millennium I, II, Mystique, G100, G200, G400 and G450. |
| * |
| * (c) 1998-2002 Petr Vandrovec <vandrove@vc.cvut.cz> |
| * |
| * Portions Copyright (c) 2001 Matrox Graphics Inc. |
| * |
| * Version: 1.65 2002/08/14 |
| * |
| * See matroxfb_base.c for contributors. |
| * |
| */ |
| |
| #include <linux/config.h> |
| |
| #include "matroxfb_DAC1064.h" |
| #include "matroxfb_misc.h" |
| #include "matroxfb_accel.h" |
| #include "g450_pll.h" |
| #include <linux/matroxfb.h> |
| |
| #ifdef NEED_DAC1064 |
| #define outDAC1064 matroxfb_DAC_out |
| #define inDAC1064 matroxfb_DAC_in |
| |
| #define DAC1064_OPT_SCLK_PCI 0x00 |
| #define DAC1064_OPT_SCLK_PLL 0x01 |
| #define DAC1064_OPT_SCLK_EXT 0x02 |
| #define DAC1064_OPT_SCLK_MASK 0x03 |
| #define DAC1064_OPT_GDIV1 0x04 /* maybe it is GDIV2 on G100 ?! */ |
| #define DAC1064_OPT_GDIV3 0x00 |
| #define DAC1064_OPT_MDIV1 0x08 |
| #define DAC1064_OPT_MDIV2 0x00 |
| #define DAC1064_OPT_RESERVED 0x10 |
| |
| static void DAC1064_calcclock(CPMINFO unsigned int freq, unsigned int fmax, unsigned int* in, unsigned int* feed, unsigned int* post) { |
| unsigned int fvco; |
| unsigned int p; |
| |
| DBG(__FUNCTION__) |
| |
| /* only for devices older than G450 */ |
| |
| fvco = PLL_calcclock(PMINFO freq, fmax, in, feed, &p); |
| |
| p = (1 << p) - 1; |
| if (fvco <= 100000) |
| ; |
| else if (fvco <= 140000) |
| p |= 0x08; |
| else if (fvco <= 180000) |
| p |= 0x10; |
| else |
| p |= 0x18; |
| *post = p; |
| } |
| |
| /* they must be in POS order */ |
| static const unsigned char MGA1064_DAC_regs[] = { |
| M1064_XCURADDL, M1064_XCURADDH, M1064_XCURCTRL, |
| M1064_XCURCOL0RED, M1064_XCURCOL0GREEN, M1064_XCURCOL0BLUE, |
| M1064_XCURCOL1RED, M1064_XCURCOL1GREEN, M1064_XCURCOL1BLUE, |
| M1064_XCURCOL2RED, M1064_XCURCOL2GREEN, M1064_XCURCOL2BLUE, |
| DAC1064_XVREFCTRL, M1064_XMULCTRL, M1064_XPIXCLKCTRL, M1064_XGENCTRL, |
| M1064_XMISCCTRL, |
| M1064_XGENIOCTRL, M1064_XGENIODATA, M1064_XZOOMCTRL, M1064_XSENSETEST, |
| M1064_XCRCBITSEL, |
| M1064_XCOLKEYMASKL, M1064_XCOLKEYMASKH, M1064_XCOLKEYL, M1064_XCOLKEYH }; |
| |
| static const unsigned char MGA1064_DAC[] = { |
| 0x00, 0x00, M1064_XCURCTRL_DIS, |
| 0x00, 0x00, 0x00, /* black */ |
| 0xFF, 0xFF, 0xFF, /* white */ |
| 0xFF, 0x00, 0x00, /* red */ |
| 0x00, 0, |
| M1064_XPIXCLKCTRL_PLL_UP | M1064_XPIXCLKCTRL_EN | M1064_XPIXCLKCTRL_SRC_PLL, |
| M1064_XGENCTRL_VS_0 | M1064_XGENCTRL_ALPHA_DIS | M1064_XGENCTRL_BLACK_0IRE | M1064_XGENCTRL_NO_SYNC_ON_GREEN, |
| M1064_XMISCCTRL_DAC_8BIT, |
| 0x00, 0x00, M1064_XZOOMCTRL_1, M1064_XSENSETEST_BCOMP | M1064_XSENSETEST_GCOMP | M1064_XSENSETEST_RCOMP | M1064_XSENSETEST_PDOWN, |
| 0x00, |
| 0x00, 0x00, 0xFF, 0xFF}; |
| |
| static void DAC1064_setpclk(WPMINFO unsigned long fout) { |
| unsigned int m, n, p; |
| |
| DBG(__FUNCTION__) |
| |
| DAC1064_calcclock(PMINFO fout, ACCESS_FBINFO(max_pixel_clock), &m, &n, &p); |
| ACCESS_FBINFO(hw).DACclk[0] = m; |
| ACCESS_FBINFO(hw).DACclk[1] = n; |
| ACCESS_FBINFO(hw).DACclk[2] = p; |
| } |
| |
| static void DAC1064_setmclk(WPMINFO int oscinfo, unsigned long fmem) { |
| u_int32_t mx; |
| struct matrox_hw_state* hw = &ACCESS_FBINFO(hw); |
| |
| DBG(__FUNCTION__) |
| |
| if (ACCESS_FBINFO(devflags.noinit)) { |
| /* read MCLK and give up... */ |
| hw->DACclk[3] = inDAC1064(PMINFO DAC1064_XSYSPLLM); |
| hw->DACclk[4] = inDAC1064(PMINFO DAC1064_XSYSPLLN); |
| hw->DACclk[5] = inDAC1064(PMINFO DAC1064_XSYSPLLP); |
| return; |
| } |
| mx = hw->MXoptionReg | 0x00000004; |
| pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION_REG, mx); |
| mx &= ~0x000000BB; |
| if (oscinfo & DAC1064_OPT_GDIV1) |
| mx |= 0x00000008; |
| if (oscinfo & DAC1064_OPT_MDIV1) |
| mx |= 0x00000010; |
| if (oscinfo & DAC1064_OPT_RESERVED) |
| mx |= 0x00000080; |
| if ((oscinfo & DAC1064_OPT_SCLK_MASK) == DAC1064_OPT_SCLK_PLL) { |
| /* select PCI clock until we have setup oscilator... */ |
| int clk; |
| unsigned int m, n, p; |
| |
| /* powerup system PLL, select PCI clock */ |
| mx |= 0x00000020; |
| pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION_REG, mx); |
| mx &= ~0x00000004; |
| pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION_REG, mx); |
| |
| /* !!! you must not access device if MCLK is not running !!! |
| Doing so cause immediate PCI lockup :-( Maybe they should |
| generate ABORT or I/O (parity...) error and Linux should |
| recover from this... (kill driver/process). But world is not |
| perfect... */ |
| /* (bit 2 of PCI_OPTION_REG must be 0... and bits 0,1 must not |
| select PLL... because of PLL can be stopped at this time) */ |
| DAC1064_calcclock(PMINFO fmem, ACCESS_FBINFO(max_pixel_clock), &m, &n, &p); |
| outDAC1064(PMINFO DAC1064_XSYSPLLM, hw->DACclk[3] = m); |
| outDAC1064(PMINFO DAC1064_XSYSPLLN, hw->DACclk[4] = n); |
| outDAC1064(PMINFO DAC1064_XSYSPLLP, hw->DACclk[5] = p); |
| for (clk = 65536; clk; --clk) { |
| if (inDAC1064(PMINFO DAC1064_XSYSPLLSTAT) & 0x40) |
| break; |
| } |
| if (!clk) |
| printk(KERN_ERR "matroxfb: aiee, SYSPLL not locked\n"); |
| /* select PLL */ |
| mx |= 0x00000005; |
| } else { |
| /* select specified system clock source */ |
| mx |= oscinfo & DAC1064_OPT_SCLK_MASK; |
| } |
| pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION_REG, mx); |
| mx &= ~0x00000004; |
| pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION_REG, mx); |
| hw->MXoptionReg = mx; |
| } |
| |
| #ifdef CONFIG_FB_MATROX_G |
| static void g450_set_plls(WPMINFO2) { |
| u_int32_t c2_ctl; |
| unsigned int pxc; |
| struct matrox_hw_state* hw = &ACCESS_FBINFO(hw); |
| int pixelmnp; |
| int videomnp; |
| |
| c2_ctl = hw->crtc2.ctl & ~0x4007; /* Clear PLL + enable for CRTC2 */ |
| c2_ctl |= 0x0001; /* Enable CRTC2 */ |
| hw->DACreg[POS1064_XPWRCTRL] &= ~0x02; /* Stop VIDEO PLL */ |
| pixelmnp = ACCESS_FBINFO(crtc1).mnp; |
| videomnp = ACCESS_FBINFO(crtc2).mnp; |
| if (videomnp < 0) { |
| c2_ctl &= ~0x0001; /* Disable CRTC2 */ |
| hw->DACreg[POS1064_XPWRCTRL] &= ~0x10; /* Powerdown CRTC2 */ |
| } else if (ACCESS_FBINFO(crtc2).pixclock == ACCESS_FBINFO(features).pll.ref_freq) { |
| c2_ctl |= 0x4002; /* Use reference directly */ |
| } else if (videomnp == pixelmnp) { |
| c2_ctl |= 0x0004; /* Use pixel PLL */ |
| } else { |
| if (0 == ((videomnp ^ pixelmnp) & 0xFFFFFF00)) { |
| /* PIXEL and VIDEO PLL must not use same frequency. We modify N |
| of PIXEL PLL in such case because of VIDEO PLL may be source |
| of TVO clocks, and chroma subcarrier is derived from its |
| pixel clocks */ |
| pixelmnp += 0x000100; |
| } |
| c2_ctl |= 0x0006; /* Use video PLL */ |
| hw->DACreg[POS1064_XPWRCTRL] |= 0x02; |
| |
| outDAC1064(PMINFO M1064_XPWRCTRL, hw->DACreg[POS1064_XPWRCTRL]); |
| matroxfb_g450_setpll_cond(PMINFO videomnp, M_VIDEO_PLL); |
| } |
| |
| hw->DACreg[POS1064_XPIXCLKCTRL] &= ~M1064_XPIXCLKCTRL_PLL_UP; |
| if (pixelmnp >= 0) { |
| hw->DACreg[POS1064_XPIXCLKCTRL] |= M1064_XPIXCLKCTRL_PLL_UP; |
| |
| outDAC1064(PMINFO M1064_XPIXCLKCTRL, hw->DACreg[POS1064_XPIXCLKCTRL]); |
| matroxfb_g450_setpll_cond(PMINFO pixelmnp, M_PIXEL_PLL_C); |
| } |
| if (c2_ctl != hw->crtc2.ctl) { |
| hw->crtc2.ctl = c2_ctl; |
| mga_outl(0x3C10, c2_ctl); |
| } |
| |
| pxc = ACCESS_FBINFO(crtc1).pixclock; |
| if (pxc == 0 || ACCESS_FBINFO(outputs[2]).src == MATROXFB_SRC_CRTC2) { |
| pxc = ACCESS_FBINFO(crtc2).pixclock; |
| } |
| if (ACCESS_FBINFO(chip) == MGA_G550) { |
| if (pxc < 45000) { |
| hw->DACreg[POS1064_XPANMODE] = 0x00; /* 0-50 */ |
| } else if (pxc < 55000) { |
| hw->DACreg[POS1064_XPANMODE] = 0x08; /* 34-62 */ |
| } else if (pxc < 70000) { |
| hw->DACreg[POS1064_XPANMODE] = 0x10; /* 42-78 */ |
| } else if (pxc < 85000) { |
| hw->DACreg[POS1064_XPANMODE] = 0x18; /* 62-92 */ |
| } else if (pxc < 100000) { |
| hw->DACreg[POS1064_XPANMODE] = 0x20; /* 74-108 */ |
| } else if (pxc < 115000) { |
| hw->DACreg[POS1064_XPANMODE] = 0x28; /* 94-122 */ |
| } else if (pxc < 125000) { |
| hw->DACreg[POS1064_XPANMODE] = 0x30; /* 108-132 */ |
| } else { |
| hw->DACreg[POS1064_XPANMODE] = 0x38; /* 120-168 */ |
| } |
| } else { |
| /* G450 */ |
| if (pxc < 45000) { |
| hw->DACreg[POS1064_XPANMODE] = 0x00; /* 0-54 */ |
| } else if (pxc < 65000) { |
| hw->DACreg[POS1064_XPANMODE] = 0x08; /* 38-70 */ |
| } else if (pxc < 85000) { |
| hw->DACreg[POS1064_XPANMODE] = 0x10; /* 56-96 */ |
| } else if (pxc < 105000) { |
| hw->DACreg[POS1064_XPANMODE] = 0x18; /* 80-114 */ |
| } else if (pxc < 135000) { |
| hw->DACreg[POS1064_XPANMODE] = 0x20; /* 102-144 */ |
| } else if (pxc < 160000) { |
| hw->DACreg[POS1064_XPANMODE] = 0x28; /* 132-166 */ |
| } else if (pxc < 175000) { |
| hw->DACreg[POS1064_XPANMODE] = 0x30; /* 154-182 */ |
| } else { |
| hw->DACreg[POS1064_XPANMODE] = 0x38; /* 170-204 */ |
| } |
| } |
| } |
| #endif |
| |
| void DAC1064_global_init(WPMINFO2) { |
| struct matrox_hw_state* hw = &ACCESS_FBINFO(hw); |
| |
| hw->DACreg[POS1064_XMISCCTRL] &= M1064_XMISCCTRL_DAC_WIDTHMASK; |
| hw->DACreg[POS1064_XMISCCTRL] |= M1064_XMISCCTRL_LUT_EN; |
| hw->DACreg[POS1064_XPIXCLKCTRL] = M1064_XPIXCLKCTRL_PLL_UP | M1064_XPIXCLKCTRL_EN | M1064_XPIXCLKCTRL_SRC_PLL; |
| #ifdef CONFIG_FB_MATROX_G |
| if (ACCESS_FBINFO(devflags.g450dac)) { |
| hw->DACreg[POS1064_XPWRCTRL] = 0x1F; /* powerup everything */ |
| hw->DACreg[POS1064_XOUTPUTCONN] = 0x00; /* disable outputs */ |
| hw->DACreg[POS1064_XMISCCTRL] |= M1064_XMISCCTRL_DAC_EN; |
| switch (ACCESS_FBINFO(outputs[0]).src) { |
| case MATROXFB_SRC_CRTC1: |
| case MATROXFB_SRC_CRTC2: |
| hw->DACreg[POS1064_XOUTPUTCONN] |= 0x01; /* enable output; CRTC1/2 selection is in CRTC2 ctl */ |
| break; |
| case MATROXFB_SRC_NONE: |
| hw->DACreg[POS1064_XMISCCTRL] &= ~M1064_XMISCCTRL_DAC_EN; |
| break; |
| } |
| switch (ACCESS_FBINFO(outputs[1]).src) { |
| case MATROXFB_SRC_CRTC1: |
| hw->DACreg[POS1064_XOUTPUTCONN] |= 0x04; |
| break; |
| case MATROXFB_SRC_CRTC2: |
| if (ACCESS_FBINFO(outputs[1]).mode == MATROXFB_OUTPUT_MODE_MONITOR) { |
| hw->DACreg[POS1064_XOUTPUTCONN] |= 0x08; |
| } else { |
| hw->DACreg[POS1064_XOUTPUTCONN] |= 0x0C; |
| } |
| break; |
| case MATROXFB_SRC_NONE: |
| hw->DACreg[POS1064_XPWRCTRL] &= ~0x01; /* Poweroff DAC2 */ |
| break; |
| } |
| switch (ACCESS_FBINFO(outputs[2]).src) { |
| case MATROXFB_SRC_CRTC1: |
| hw->DACreg[POS1064_XOUTPUTCONN] |= 0x20; |
| break; |
| case MATROXFB_SRC_CRTC2: |
| hw->DACreg[POS1064_XOUTPUTCONN] |= 0x40; |
| break; |
| case MATROXFB_SRC_NONE: |
| #if 0 |
| /* HELP! If we boot without DFP connected to DVI, we can |
| poweroff TMDS. But if we boot with DFP connected, |
| TMDS generated clocks are used instead of ALL pixclocks |
| available... If someone knows which register |
| handles it, please reveal this secret to me... */ |
| hw->DACreg[POS1064_XPWRCTRL] &= ~0x04; /* Poweroff TMDS */ |
| #endif |
| break; |
| } |
| /* Now set timming related variables... */ |
| g450_set_plls(PMINFO2); |
| } else |
| #endif |
| { |
| if (ACCESS_FBINFO(outputs[1]).src == MATROXFB_SRC_CRTC1) { |
| hw->DACreg[POS1064_XPIXCLKCTRL] = M1064_XPIXCLKCTRL_PLL_UP | M1064_XPIXCLKCTRL_EN | M1064_XPIXCLKCTRL_SRC_EXT; |
| hw->DACreg[POS1064_XMISCCTRL] |= GX00_XMISCCTRL_MFC_MAFC | G400_XMISCCTRL_VDO_MAFC12; |
| } else if (ACCESS_FBINFO(outputs[1]).src == MATROXFB_SRC_CRTC2) { |
| hw->DACreg[POS1064_XMISCCTRL] |= GX00_XMISCCTRL_MFC_MAFC | G400_XMISCCTRL_VDO_C2_MAFC12; |
| } else if (ACCESS_FBINFO(outputs[2]).src == MATROXFB_SRC_CRTC1) |
| hw->DACreg[POS1064_XMISCCTRL] |= GX00_XMISCCTRL_MFC_PANELLINK | G400_XMISCCTRL_VDO_MAFC12; |
| else |
| hw->DACreg[POS1064_XMISCCTRL] |= GX00_XMISCCTRL_MFC_DIS; |
| |
| if (ACCESS_FBINFO(outputs[0]).src != MATROXFB_SRC_NONE) |
| hw->DACreg[POS1064_XMISCCTRL] |= M1064_XMISCCTRL_DAC_EN; |
| } |
| } |
| |
| void DAC1064_global_restore(WPMINFO2) { |
| struct matrox_hw_state* hw = &ACCESS_FBINFO(hw); |
| |
| outDAC1064(PMINFO M1064_XPIXCLKCTRL, hw->DACreg[POS1064_XPIXCLKCTRL]); |
| outDAC1064(PMINFO M1064_XMISCCTRL, hw->DACreg[POS1064_XMISCCTRL]); |
| if (ACCESS_FBINFO(devflags.accelerator) == FB_ACCEL_MATROX_MGAG400) { |
| outDAC1064(PMINFO 0x20, 0x04); |
| outDAC1064(PMINFO 0x1F, ACCESS_FBINFO(devflags.dfp_type)); |
| if (ACCESS_FBINFO(devflags.g450dac)) { |
| outDAC1064(PMINFO M1064_XSYNCCTRL, 0xCC); |
| outDAC1064(PMINFO M1064_XPWRCTRL, hw->DACreg[POS1064_XPWRCTRL]); |
| outDAC1064(PMINFO M1064_XPANMODE, hw->DACreg[POS1064_XPANMODE]); |
| outDAC1064(PMINFO M1064_XOUTPUTCONN, hw->DACreg[POS1064_XOUTPUTCONN]); |
| } |
| } |
| } |
| |
| static int DAC1064_init_1(WPMINFO struct my_timming* m) { |
| struct matrox_hw_state* hw = &ACCESS_FBINFO(hw); |
| |
| DBG(__FUNCTION__) |
| |
| memcpy(hw->DACreg, MGA1064_DAC, sizeof(MGA1064_DAC_regs)); |
| switch (ACCESS_FBINFO(fbcon).var.bits_per_pixel) { |
| /* case 4: not supported by MGA1064 DAC */ |
| case 8: |
| hw->DACreg[POS1064_XMULCTRL] = M1064_XMULCTRL_DEPTH_8BPP | M1064_XMULCTRL_GRAPHICS_PALETIZED; |
| break; |
| case 16: |
| if (ACCESS_FBINFO(fbcon).var.green.length == 5) |
| hw->DACreg[POS1064_XMULCTRL] = M1064_XMULCTRL_DEPTH_15BPP_1BPP | M1064_XMULCTRL_GRAPHICS_PALETIZED; |
| else |
| hw->DACreg[POS1064_XMULCTRL] = M1064_XMULCTRL_DEPTH_16BPP | M1064_XMULCTRL_GRAPHICS_PALETIZED; |
| break; |
| case 24: |
| hw->DACreg[POS1064_XMULCTRL] = M1064_XMULCTRL_DEPTH_24BPP | M1064_XMULCTRL_GRAPHICS_PALETIZED; |
| break; |
| case 32: |
| hw->DACreg[POS1064_XMULCTRL] = M1064_XMULCTRL_DEPTH_32BPP | M1064_XMULCTRL_GRAPHICS_PALETIZED; |
| break; |
| default: |
| return 1; /* unsupported depth */ |
| } |
| hw->DACreg[POS1064_XVREFCTRL] = ACCESS_FBINFO(features.DAC1064.xvrefctrl); |
| hw->DACreg[POS1064_XGENCTRL] &= ~M1064_XGENCTRL_SYNC_ON_GREEN_MASK; |
| hw->DACreg[POS1064_XGENCTRL] |= (m->sync & FB_SYNC_ON_GREEN)?M1064_XGENCTRL_SYNC_ON_GREEN:M1064_XGENCTRL_NO_SYNC_ON_GREEN; |
| hw->DACreg[POS1064_XCURADDL] = 0; |
| hw->DACreg[POS1064_XCURADDH] = 0; |
| |
| DAC1064_global_init(PMINFO2); |
| return 0; |
| } |
| |
| static int DAC1064_init_2(WPMINFO struct my_timming* m) { |
| struct matrox_hw_state* hw = &ACCESS_FBINFO(hw); |
| |
| DBG(__FUNCTION__) |
| |
| if (ACCESS_FBINFO(fbcon).var.bits_per_pixel > 16) { /* 256 entries */ |
| int i; |
| |
| for (i = 0; i < 256; i++) { |
| hw->DACpal[i * 3 + 0] = i; |
| hw->DACpal[i * 3 + 1] = i; |
| hw->DACpal[i * 3 + 2] = i; |
| } |
| } else if (ACCESS_FBINFO(fbcon).var.bits_per_pixel > 8) { |
| if (ACCESS_FBINFO(fbcon).var.green.length == 5) { /* 0..31, 128..159 */ |
| int i; |
| |
| for (i = 0; i < 32; i++) { |
| /* with p15 == 0 */ |
| hw->DACpal[i * 3 + 0] = i << 3; |
| hw->DACpal[i * 3 + 1] = i << 3; |
| hw->DACpal[i * 3 + 2] = i << 3; |
| /* with p15 == 1 */ |
| hw->DACpal[(i + 128) * 3 + 0] = i << 3; |
| hw->DACpal[(i + 128) * 3 + 1] = i << 3; |
| hw->DACpal[(i + 128) * 3 + 2] = i << 3; |
| } |
| } else { |
| int i; |
| |
| for (i = 0; i < 64; i++) { /* 0..63 */ |
| hw->DACpal[i * 3 + 0] = i << 3; |
| hw->DACpal[i * 3 + 1] = i << 2; |
| hw->DACpal[i * 3 + 2] = i << 3; |
| } |
| } |
| } else { |
| memset(hw->DACpal, 0, 768); |
| } |
| return 0; |
| } |
| |
| static void DAC1064_restore_1(WPMINFO2) { |
| struct matrox_hw_state* hw = &ACCESS_FBINFO(hw); |
| |
| CRITFLAGS |
| |
| DBG(__FUNCTION__) |
| |
| CRITBEGIN |
| |
| if ((inDAC1064(PMINFO DAC1064_XSYSPLLM) != hw->DACclk[3]) || |
| (inDAC1064(PMINFO DAC1064_XSYSPLLN) != hw->DACclk[4]) || |
| (inDAC1064(PMINFO DAC1064_XSYSPLLP) != hw->DACclk[5])) { |
| outDAC1064(PMINFO DAC1064_XSYSPLLM, hw->DACclk[3]); |
| outDAC1064(PMINFO DAC1064_XSYSPLLN, hw->DACclk[4]); |
| outDAC1064(PMINFO DAC1064_XSYSPLLP, hw->DACclk[5]); |
| } |
| { |
| unsigned int i; |
| |
| for (i = 0; i < sizeof(MGA1064_DAC_regs); i++) { |
| if ((i != POS1064_XPIXCLKCTRL) && (i != POS1064_XMISCCTRL)) |
| outDAC1064(PMINFO MGA1064_DAC_regs[i], hw->DACreg[i]); |
| } |
| } |
| |
| DAC1064_global_restore(PMINFO2); |
| |
| CRITEND |
| }; |
| |
| static void DAC1064_restore_2(WPMINFO2) { |
| #ifdef DEBUG |
| unsigned int i; |
| #endif |
| |
| DBG(__FUNCTION__) |
| |
| #ifdef DEBUG |
| dprintk(KERN_DEBUG "DAC1064regs "); |
| for (i = 0; i < sizeof(MGA1064_DAC_regs); i++) { |
| dprintk("R%02X=%02X ", MGA1064_DAC_regs[i], ACCESS_FBINFO(hw).DACreg[i]); |
| if ((i & 0x7) == 0x7) dprintk("\n" KERN_DEBUG "continuing... "); |
| } |
| dprintk("\n" KERN_DEBUG "DAC1064clk "); |
| for (i = 0; i < 6; i++) |
| dprintk("C%02X=%02X ", i, ACCESS_FBINFO(hw).DACclk[i]); |
| dprintk("\n"); |
| #endif |
| } |
| |
| static int m1064_compute(void* out, struct my_timming* m) { |
| #define minfo ((struct matrox_fb_info*)out) |
| { |
| int i; |
| int tmout; |
| CRITFLAGS |
| |
| DAC1064_setpclk(PMINFO m->pixclock); |
| |
| CRITBEGIN |
| |
| for (i = 0; i < 3; i++) |
| outDAC1064(PMINFO M1064_XPIXPLLCM + i, ACCESS_FBINFO(hw).DACclk[i]); |
| for (tmout = 500000; tmout; tmout--) { |
| if (inDAC1064(PMINFO M1064_XPIXPLLSTAT) & 0x40) |
| break; |
| udelay(10); |
| }; |
| |
| CRITEND |
| |
| if (!tmout) |
| printk(KERN_ERR "matroxfb: Pixel PLL not locked after 5 secs\n"); |
| } |
| #undef minfo |
| return 0; |
| } |
| |
| static struct matrox_altout m1064 = { |
| .name = "Primary output", |
| .compute = m1064_compute, |
| }; |
| |
| #ifdef CONFIG_FB_MATROX_G |
| static int g450_compute(void* out, struct my_timming* m) { |
| #define minfo ((struct matrox_fb_info*)out) |
| if (m->mnp < 0) { |
| m->mnp = matroxfb_g450_setclk(PMINFO m->pixclock, (m->crtc == MATROXFB_SRC_CRTC1) ? M_PIXEL_PLL_C : M_VIDEO_PLL); |
| if (m->mnp >= 0) { |
| m->pixclock = g450_mnp2f(PMINFO m->mnp); |
| } |
| } |
| #undef minfo |
| return 0; |
| } |
| |
| static struct matrox_altout g450out = { |
| .name = "Primary output", |
| .compute = g450_compute, |
| }; |
| #endif |
| |
| #endif /* NEED_DAC1064 */ |
| |
| #ifdef CONFIG_FB_MATROX_MYSTIQUE |
| static int MGA1064_init(WPMINFO struct my_timming* m) { |
| struct matrox_hw_state* hw = &ACCESS_FBINFO(hw); |
| |
| DBG(__FUNCTION__) |
| |
| if (DAC1064_init_1(PMINFO m)) return 1; |
| if (matroxfb_vgaHWinit(PMINFO m)) return 1; |
| |
| hw->MiscOutReg = 0xCB; |
| if (m->sync & FB_SYNC_HOR_HIGH_ACT) |
| hw->MiscOutReg &= ~0x40; |
| if (m->sync & FB_SYNC_VERT_HIGH_ACT) |
| hw->MiscOutReg &= ~0x80; |
| if (m->sync & FB_SYNC_COMP_HIGH_ACT) /* should be only FB_SYNC_COMP */ |
| hw->CRTCEXT[3] |= 0x40; |
| |
| if (DAC1064_init_2(PMINFO m)) return 1; |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_FB_MATROX_G |
| static int MGAG100_init(WPMINFO struct my_timming* m) { |
| struct matrox_hw_state* hw = &ACCESS_FBINFO(hw); |
| |
| DBG(__FUNCTION__) |
| |
| if (DAC1064_init_1(PMINFO m)) return 1; |
| hw->MXoptionReg &= ~0x2000; |
| if (matroxfb_vgaHWinit(PMINFO m)) return 1; |
| |
| hw->MiscOutReg = 0xEF; |
| if (m->sync & FB_SYNC_HOR_HIGH_ACT) |
| hw->MiscOutReg &= ~0x40; |
| if (m->sync & FB_SYNC_VERT_HIGH_ACT) |
| hw->MiscOutReg &= ~0x80; |
| if (m->sync & FB_SYNC_COMP_HIGH_ACT) /* should be only FB_SYNC_COMP */ |
| hw->CRTCEXT[3] |= 0x40; |
| |
| if (DAC1064_init_2(PMINFO m)) return 1; |
| return 0; |
| } |
| #endif /* G */ |
| |
| #ifdef CONFIG_FB_MATROX_MYSTIQUE |
| static void MGA1064_ramdac_init(WPMINFO2) { |
| |
| DBG(__FUNCTION__) |
| |
| /* ACCESS_FBINFO(features.DAC1064.vco_freq_min) = 120000; */ |
| ACCESS_FBINFO(features.pll.vco_freq_min) = 62000; |
| ACCESS_FBINFO(features.pll.ref_freq) = 14318; |
| ACCESS_FBINFO(features.pll.feed_div_min) = 100; |
| ACCESS_FBINFO(features.pll.feed_div_max) = 127; |
| ACCESS_FBINFO(features.pll.in_div_min) = 1; |
| ACCESS_FBINFO(features.pll.in_div_max) = 31; |
| ACCESS_FBINFO(features.pll.post_shift_max) = 3; |
| ACCESS_FBINFO(features.DAC1064.xvrefctrl) = DAC1064_XVREFCTRL_EXTERNAL; |
| /* maybe cmdline MCLK= ?, doc says gclk=44MHz, mclk=66MHz... it was 55/83 with old values */ |
| DAC1064_setmclk(PMINFO DAC1064_OPT_MDIV2 | DAC1064_OPT_GDIV3 | DAC1064_OPT_SCLK_PLL, 133333); |
| } |
| #endif |
| |
| #ifdef CONFIG_FB_MATROX_G |
| /* BIOS environ */ |
| static int x7AF4 = 0x10; /* flags, maybe 0x10 = SDRAM, 0x00 = SGRAM??? */ |
| /* G100 wants 0x10, G200 SGRAM does not care... */ |
| #if 0 |
| static int def50 = 0; /* reg50, & 0x0F, & 0x3000 (only 0x0000, 0x1000, 0x2000 (0x3000 disallowed and treated as 0) */ |
| #endif |
| |
| static void MGAG100_progPixClock(CPMINFO int flags, int m, int n, int p) { |
| int reg; |
| int selClk; |
| int clk; |
| |
| DBG(__FUNCTION__) |
| |
| outDAC1064(PMINFO M1064_XPIXCLKCTRL, inDAC1064(PMINFO M1064_XPIXCLKCTRL) | M1064_XPIXCLKCTRL_DIS | |
| M1064_XPIXCLKCTRL_PLL_UP); |
| switch (flags & 3) { |
| case 0: reg = M1064_XPIXPLLAM; break; |
| case 1: reg = M1064_XPIXPLLBM; break; |
| default: reg = M1064_XPIXPLLCM; break; |
| } |
| outDAC1064(PMINFO reg++, m); |
| outDAC1064(PMINFO reg++, n); |
| outDAC1064(PMINFO reg, p); |
| selClk = mga_inb(M_MISC_REG_READ) & ~0xC; |
| /* there should be flags & 0x03 & case 0/1/else */ |
| /* and we should first select source and after that we should wait for PLL */ |
| /* and we are waiting for PLL with oscilator disabled... Is it right? */ |
| switch (flags & 0x03) { |
| case 0x00: break; |
| case 0x01: selClk |= 4; break; |
| default: selClk |= 0x0C; break; |
| } |
| mga_outb(M_MISC_REG, selClk); |
| for (clk = 500000; clk; clk--) { |
| if (inDAC1064(PMINFO M1064_XPIXPLLSTAT) & 0x40) |
| break; |
| udelay(10); |
| }; |
| if (!clk) |
| printk(KERN_ERR "matroxfb: Pixel PLL%c not locked after usual time\n", (reg-M1064_XPIXPLLAM-2)/4 + 'A'); |
| selClk = inDAC1064(PMINFO M1064_XPIXCLKCTRL) & ~M1064_XPIXCLKCTRL_SRC_MASK; |
| switch (flags & 0x0C) { |
| case 0x00: selClk |= M1064_XPIXCLKCTRL_SRC_PCI; break; |
| case 0x04: selClk |= M1064_XPIXCLKCTRL_SRC_PLL; break; |
| default: selClk |= M1064_XPIXCLKCTRL_SRC_EXT; break; |
| } |
| outDAC1064(PMINFO M1064_XPIXCLKCTRL, selClk); |
| outDAC1064(PMINFO M1064_XPIXCLKCTRL, inDAC1064(PMINFO M1064_XPIXCLKCTRL) & ~M1064_XPIXCLKCTRL_DIS); |
| } |
| |
| static void MGAG100_setPixClock(CPMINFO int flags, int freq) { |
| unsigned int m, n, p; |
| |
| DBG(__FUNCTION__) |
| |
| DAC1064_calcclock(PMINFO freq, ACCESS_FBINFO(max_pixel_clock), &m, &n, &p); |
| MGAG100_progPixClock(PMINFO flags, m, n, p); |
| } |
| #endif |
| |
| #ifdef CONFIG_FB_MATROX_MYSTIQUE |
| static int MGA1064_preinit(WPMINFO2) { |
| static const int vxres_mystique[] = { 512, 640, 768, 800, 832, 960, |
| 1024, 1152, 1280, 1600, 1664, 1920, |
| 2048, 0}; |
| struct matrox_hw_state* hw = &ACCESS_FBINFO(hw); |
| |
| DBG(__FUNCTION__) |
| |
| /* ACCESS_FBINFO(capable.cfb4) = 0; ... preinitialized by 0 */ |
| ACCESS_FBINFO(capable.text) = 1; |
| ACCESS_FBINFO(capable.vxres) = vxres_mystique; |
| |
| ACCESS_FBINFO(outputs[0]).output = &m1064; |
| ACCESS_FBINFO(outputs[0]).src = ACCESS_FBINFO(outputs[0]).default_src; |
| ACCESS_FBINFO(outputs[0]).data = MINFO; |
| ACCESS_FBINFO(outputs[0]).mode = MATROXFB_OUTPUT_MODE_MONITOR; |
| |
| if (ACCESS_FBINFO(devflags.noinit)) |
| return 0; /* do not modify settings */ |
| hw->MXoptionReg &= 0xC0000100; |
| hw->MXoptionReg |= 0x00094E20; |
| if (ACCESS_FBINFO(devflags.novga)) |
| hw->MXoptionReg &= ~0x00000100; |
| if (ACCESS_FBINFO(devflags.nobios)) |
| hw->MXoptionReg &= ~0x40000000; |
| if (ACCESS_FBINFO(devflags.nopciretry)) |
| hw->MXoptionReg |= 0x20000000; |
| pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION_REG, hw->MXoptionReg); |
| mga_setr(M_SEQ_INDEX, 0x01, 0x20); |
| mga_outl(M_CTLWTST, 0x00000000); |
| udelay(200); |
| mga_outl(M_MACCESS, 0x00008000); |
| udelay(100); |
| mga_outl(M_MACCESS, 0x0000C000); |
| return 0; |
| } |
| |
| static void MGA1064_reset(WPMINFO2) { |
| |
| DBG(__FUNCTION__); |
| |
| MGA1064_ramdac_init(PMINFO2); |
| } |
| #endif |
| |
| #ifdef CONFIG_FB_MATROX_G |
| static void g450_mclk_init(WPMINFO2) { |
| /* switch all clocks to PCI source */ |
| pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION_REG, ACCESS_FBINFO(hw).MXoptionReg | 4); |
| pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION3_REG, ACCESS_FBINFO(values).reg.opt3 & ~0x00300C03); |
| pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION_REG, ACCESS_FBINFO(hw).MXoptionReg); |
| |
| if (((ACCESS_FBINFO(values).reg.opt3 & 0x000003) == 0x000003) || |
| ((ACCESS_FBINFO(values).reg.opt3 & 0x000C00) == 0x000C00) || |
| ((ACCESS_FBINFO(values).reg.opt3 & 0x300000) == 0x300000)) { |
| matroxfb_g450_setclk(PMINFO ACCESS_FBINFO(values.pll.video), M_VIDEO_PLL); |
| } else { |
| unsigned long flags; |
| unsigned int pwr; |
| |
| matroxfb_DAC_lock_irqsave(flags); |
| pwr = inDAC1064(PMINFO M1064_XPWRCTRL) & ~0x02; |
| outDAC1064(PMINFO M1064_XPWRCTRL, pwr); |
| matroxfb_DAC_unlock_irqrestore(flags); |
| } |
| matroxfb_g450_setclk(PMINFO ACCESS_FBINFO(values.pll.system), M_SYSTEM_PLL); |
| |
| /* switch clocks to their real PLL source(s) */ |
| pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION_REG, ACCESS_FBINFO(hw).MXoptionReg | 4); |
| pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION3_REG, ACCESS_FBINFO(values).reg.opt3); |
| pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION_REG, ACCESS_FBINFO(hw).MXoptionReg); |
| |
| } |
| |
| static void g450_memory_init(WPMINFO2) { |
| /* disable memory refresh */ |
| ACCESS_FBINFO(hw).MXoptionReg &= ~0x001F8000; |
| pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION_REG, ACCESS_FBINFO(hw).MXoptionReg); |
| |
| /* set memory interface parameters */ |
| ACCESS_FBINFO(hw).MXoptionReg &= ~0x00207E00; |
| ACCESS_FBINFO(hw).MXoptionReg |= 0x00207E00 & ACCESS_FBINFO(values).reg.opt; |
| pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION_REG, ACCESS_FBINFO(hw).MXoptionReg); |
| pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION2_REG, ACCESS_FBINFO(values).reg.opt2); |
| |
| mga_outl(M_CTLWTST, ACCESS_FBINFO(values).reg.mctlwtst); |
| |
| /* first set up memory interface with disabled memory interface clocks */ |
| pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_MEMMISC_REG, ACCESS_FBINFO(values).reg.memmisc & ~0x80000000U); |
| mga_outl(M_MEMRDBK, ACCESS_FBINFO(values).reg.memrdbk); |
| mga_outl(M_MACCESS, ACCESS_FBINFO(values).reg.maccess); |
| /* start memory clocks */ |
| pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_MEMMISC_REG, ACCESS_FBINFO(values).reg.memmisc | 0x80000000U); |
| |
| udelay(200); |
| |
| if (ACCESS_FBINFO(values).memory.ddr && (!ACCESS_FBINFO(values).memory.emrswen || !ACCESS_FBINFO(values).memory.dll)) { |
| mga_outl(M_MEMRDBK, ACCESS_FBINFO(values).reg.memrdbk & ~0x1000); |
| } |
| mga_outl(M_MACCESS, ACCESS_FBINFO(values).reg.maccess | 0x8000); |
| |
| udelay(200); |
| |
| ACCESS_FBINFO(hw).MXoptionReg |= 0x001F8000 & ACCESS_FBINFO(values).reg.opt; |
| pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION_REG, ACCESS_FBINFO(hw).MXoptionReg); |
| |
| /* value is written to memory chips only if old != new */ |
| mga_outl(M_PLNWT, 0); |
| mga_outl(M_PLNWT, ~0); |
| |
| if (ACCESS_FBINFO(values).reg.mctlwtst != ACCESS_FBINFO(values).reg.mctlwtst_core) { |
| mga_outl(M_CTLWTST, ACCESS_FBINFO(values).reg.mctlwtst_core); |
| } |
| |
| } |
| |
| static void g450_preinit(WPMINFO2) { |
| u_int32_t c2ctl; |
| u_int8_t curctl; |
| u_int8_t c1ctl; |
| |
| /* ACCESS_FBINFO(hw).MXoptionReg = minfo->values.reg.opt; */ |
| ACCESS_FBINFO(hw).MXoptionReg &= 0xC0000100; |
| ACCESS_FBINFO(hw).MXoptionReg |= 0x00000020; |
| if (ACCESS_FBINFO(devflags.novga)) |
| ACCESS_FBINFO(hw).MXoptionReg &= ~0x00000100; |
| if (ACCESS_FBINFO(devflags.nobios)) |
| ACCESS_FBINFO(hw).MXoptionReg &= ~0x40000000; |
| if (ACCESS_FBINFO(devflags.nopciretry)) |
| ACCESS_FBINFO(hw).MXoptionReg |= 0x20000000; |
| ACCESS_FBINFO(hw).MXoptionReg |= ACCESS_FBINFO(values).reg.opt & 0x03400040; |
| pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION_REG, ACCESS_FBINFO(hw).MXoptionReg); |
| |
| /* Init system clocks */ |
| |
| /* stop crtc2 */ |
| c2ctl = mga_inl(M_C2CTL); |
| mga_outl(M_C2CTL, c2ctl & ~1); |
| /* stop cursor */ |
| curctl = inDAC1064(PMINFO M1064_XCURCTRL); |
| outDAC1064(PMINFO M1064_XCURCTRL, 0); |
| /* stop crtc1 */ |
| c1ctl = mga_readr(M_SEQ_INDEX, 1); |
| mga_setr(M_SEQ_INDEX, 1, c1ctl | 0x20); |
| |
| g450_mclk_init(PMINFO2); |
| g450_memory_init(PMINFO2); |
| |
| /* set legacy VGA clock sources for DOSEmu or VMware... */ |
| matroxfb_g450_setclk(PMINFO 25175, M_PIXEL_PLL_A); |
| matroxfb_g450_setclk(PMINFO 28322, M_PIXEL_PLL_B); |
| |
| /* restore crtc1 */ |
| mga_setr(M_SEQ_INDEX, 1, c1ctl); |
| |
| /* restore cursor */ |
| outDAC1064(PMINFO M1064_XCURCTRL, curctl); |
| |
| /* restore crtc2 */ |
| mga_outl(M_C2CTL, c2ctl); |
| |
| return; |
| } |
| |
| static int MGAG100_preinit(WPMINFO2) { |
| static const int vxres_g100[] = { 512, 640, 768, 800, 832, 960, |
| 1024, 1152, 1280, 1600, 1664, 1920, |
| 2048, 0}; |
| struct matrox_hw_state* hw = &ACCESS_FBINFO(hw); |
| |
| u_int32_t reg50; |
| #if 0 |
| u_int32_t q; |
| #endif |
| |
| DBG(__FUNCTION__) |
| |
| /* there are some instabilities if in_div > 19 && vco < 61000 */ |
| if (ACCESS_FBINFO(devflags.g450dac)) { |
| ACCESS_FBINFO(features.pll.vco_freq_min) = 130000; /* my sample: >118 */ |
| } else { |
| ACCESS_FBINFO(features.pll.vco_freq_min) = 62000; |
| } |
| if (!ACCESS_FBINFO(features.pll.ref_freq)) { |
| ACCESS_FBINFO(features.pll.ref_freq) = 27000; |
| } |
| ACCESS_FBINFO(features.pll.feed_div_min) = 7; |
| ACCESS_FBINFO(features.pll.feed_div_max) = 127; |
| ACCESS_FBINFO(features.pll.in_div_min) = 1; |
| ACCESS_FBINFO(features.pll.in_div_max) = 31; |
| ACCESS_FBINFO(features.pll.post_shift_max) = 3; |
| ACCESS_FBINFO(features.DAC1064.xvrefctrl) = DAC1064_XVREFCTRL_G100_DEFAULT; |
| /* ACCESS_FBINFO(capable.cfb4) = 0; ... preinitialized by 0 */ |
| ACCESS_FBINFO(capable.text) = 1; |
| ACCESS_FBINFO(capable.vxres) = vxres_g100; |
| ACCESS_FBINFO(capable.plnwt) = ACCESS_FBINFO(devflags.accelerator) == FB_ACCEL_MATROX_MGAG100 |
| ? ACCESS_FBINFO(devflags.sgram) : 1; |
| |
| #ifdef CONFIG_FB_MATROX_G |
| if (ACCESS_FBINFO(devflags.g450dac)) { |
| ACCESS_FBINFO(outputs[0]).output = &g450out; |
| } else |
| #endif |
| { |
| ACCESS_FBINFO(outputs[0]).output = &m1064; |
| } |
| ACCESS_FBINFO(outputs[0]).src = ACCESS_FBINFO(outputs[0]).default_src; |
| ACCESS_FBINFO(outputs[0]).data = MINFO; |
| ACCESS_FBINFO(outputs[0]).mode = MATROXFB_OUTPUT_MODE_MONITOR; |
| |
| if (ACCESS_FBINFO(devflags.g450dac)) { |
| /* we must do this always, BIOS does not do it for us |
| and accelerator dies without it */ |
| mga_outl(0x1C0C, 0); |
| } |
| if (ACCESS_FBINFO(devflags.noinit)) |
| return 0; |
| if (ACCESS_FBINFO(devflags.g450dac)) { |
| g450_preinit(PMINFO2); |
| return 0; |
| } |
| hw->MXoptionReg &= 0xC0000100; |
| hw->MXoptionReg |= 0x00000020; |
| if (ACCESS_FBINFO(devflags.novga)) |
| hw->MXoptionReg &= ~0x00000100; |
| if (ACCESS_FBINFO(devflags.nobios)) |
| hw->MXoptionReg &= ~0x40000000; |
| if (ACCESS_FBINFO(devflags.nopciretry)) |
| hw->MXoptionReg |= 0x20000000; |
| pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION_REG, hw->MXoptionReg); |
| DAC1064_setmclk(PMINFO DAC1064_OPT_MDIV2 | DAC1064_OPT_GDIV3 | DAC1064_OPT_SCLK_PCI, 133333); |
| |
| if (ACCESS_FBINFO(devflags.accelerator) == FB_ACCEL_MATROX_MGAG100) { |
| pci_read_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION2_REG, ®50); |
| reg50 &= ~0x3000; |
| pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION2_REG, reg50); |
| |
| hw->MXoptionReg |= 0x1080; |
| pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION_REG, hw->MXoptionReg); |
| mga_outl(M_CTLWTST, ACCESS_FBINFO(values).reg.mctlwtst); |
| udelay(100); |
| mga_outb(0x1C05, 0x00); |
| mga_outb(0x1C05, 0x80); |
| udelay(100); |
| mga_outb(0x1C05, 0x40); |
| mga_outb(0x1C05, 0xC0); |
| udelay(100); |
| reg50 &= ~0xFF; |
| reg50 |= 0x07; |
| pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION2_REG, reg50); |
| /* it should help with G100 */ |
| mga_outb(M_GRAPHICS_INDEX, 6); |
| mga_outb(M_GRAPHICS_DATA, (mga_inb(M_GRAPHICS_DATA) & 3) | 4); |
| mga_setr(M_EXTVGA_INDEX, 0x03, 0x81); |
| mga_setr(M_EXTVGA_INDEX, 0x04, 0x00); |
| mga_writeb(ACCESS_FBINFO(video.vbase), 0x0000, 0xAA); |
| mga_writeb(ACCESS_FBINFO(video.vbase), 0x0800, 0x55); |
| mga_writeb(ACCESS_FBINFO(video.vbase), 0x4000, 0x55); |
| #if 0 |
| if (mga_readb(ACCESS_FBINFO(video.vbase), 0x0000) != 0xAA) { |
| hw->MXoptionReg &= ~0x1000; |
| } |
| #endif |
| hw->MXoptionReg |= 0x00078020; |
| } else if (ACCESS_FBINFO(devflags.accelerator) == FB_ACCEL_MATROX_MGAG200) { |
| pci_read_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION2_REG, ®50); |
| reg50 &= ~0x3000; |
| pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION2_REG, reg50); |
| |
| if (ACCESS_FBINFO(devflags.memtype) == -1) |
| hw->MXoptionReg |= ACCESS_FBINFO(values).reg.opt & 0x1C00; |
| else |
| hw->MXoptionReg |= (ACCESS_FBINFO(devflags.memtype) & 7) << 10; |
| if (ACCESS_FBINFO(devflags.sgram)) |
| hw->MXoptionReg |= 0x4000; |
| mga_outl(M_CTLWTST, ACCESS_FBINFO(values).reg.mctlwtst); |
| mga_outl(M_MEMRDBK, ACCESS_FBINFO(values).reg.memrdbk); |
| udelay(200); |
| mga_outl(M_MACCESS, 0x00000000); |
| mga_outl(M_MACCESS, 0x00008000); |
| udelay(100); |
| mga_outw(M_MEMRDBK, ACCESS_FBINFO(values).reg.memrdbk); |
| hw->MXoptionReg |= 0x00078020; |
| } else { |
| pci_read_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION2_REG, ®50); |
| reg50 &= ~0x00000100; |
| reg50 |= 0x00000000; |
| pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION2_REG, reg50); |
| |
| if (ACCESS_FBINFO(devflags.memtype) == -1) |
| hw->MXoptionReg |= ACCESS_FBINFO(values).reg.opt & 0x1C00; |
| else |
| hw->MXoptionReg |= (ACCESS_FBINFO(devflags.memtype) & 7) << 10; |
| if (ACCESS_FBINFO(devflags.sgram)) |
| hw->MXoptionReg |= 0x4000; |
| mga_outl(M_CTLWTST, ACCESS_FBINFO(values).reg.mctlwtst); |
| mga_outl(M_MEMRDBK, ACCESS_FBINFO(values).reg.memrdbk); |
| udelay(200); |
| mga_outl(M_MACCESS, 0x00000000); |
| mga_outl(M_MACCESS, 0x00008000); |
| udelay(100); |
| mga_outl(M_MEMRDBK, ACCESS_FBINFO(values).reg.memrdbk); |
| hw->MXoptionReg |= 0x00040020; |
| } |
| pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION_REG, hw->MXoptionReg); |
| return 0; |
| } |
| |
| static void MGAG100_reset(WPMINFO2) { |
| u_int8_t b; |
| struct matrox_hw_state* hw = &ACCESS_FBINFO(hw); |
| |
| DBG(__FUNCTION__) |
| |
| { |
| #ifdef G100_BROKEN_IBM_82351 |
| u_int32_t d; |
| |
| find 1014/22 (IBM/82351); /* if found and bridging Matrox, do some strange stuff */ |
| pci_read_config_byte(ibm, PCI_SECONDARY_BUS, &b); |
| if (b == ACCESS_FBINFO(pcidev)->bus->number) { |
| pci_write_config_byte(ibm, PCI_COMMAND+1, 0); /* disable back-to-back & SERR */ |
| pci_write_config_byte(ibm, 0x41, 0xF4); /* ??? */ |
| pci_write_config_byte(ibm, PCI_IO_BASE, 0xF0); /* ??? */ |
| pci_write_config_byte(ibm, PCI_IO_LIMIT, 0x00); /* ??? */ |
| } |
| #endif |
| if (!ACCESS_FBINFO(devflags.noinit)) { |
| if (x7AF4 & 8) { |
| hw->MXoptionReg |= 0x40; /* FIXME... */ |
| pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION_REG, hw->MXoptionReg); |
| } |
| mga_setr(M_EXTVGA_INDEX, 0x06, 0x00); |
| } |
| } |
| if (ACCESS_FBINFO(devflags.g450dac)) { |
| /* either leave MCLK as is... or they were set in preinit */ |
| hw->DACclk[3] = inDAC1064(PMINFO DAC1064_XSYSPLLM); |
| hw->DACclk[4] = inDAC1064(PMINFO DAC1064_XSYSPLLN); |
| hw->DACclk[5] = inDAC1064(PMINFO DAC1064_XSYSPLLP); |
| } else { |
| DAC1064_setmclk(PMINFO DAC1064_OPT_RESERVED | DAC1064_OPT_MDIV2 | DAC1064_OPT_GDIV1 | DAC1064_OPT_SCLK_PLL, 133333); |
| } |
| if (ACCESS_FBINFO(devflags.accelerator) == FB_ACCEL_MATROX_MGAG400) { |
| if (ACCESS_FBINFO(devflags.dfp_type) == -1) { |
| ACCESS_FBINFO(devflags.dfp_type) = inDAC1064(PMINFO 0x1F); |
| } |
| } |
| if (ACCESS_FBINFO(devflags.noinit)) |
| return; |
| if (ACCESS_FBINFO(devflags.g450dac)) { |
| } else { |
| MGAG100_setPixClock(PMINFO 4, 25175); |
| MGAG100_setPixClock(PMINFO 5, 28322); |
| if (x7AF4 & 0x10) { |
| b = inDAC1064(PMINFO M1064_XGENIODATA) & ~1; |
| outDAC1064(PMINFO M1064_XGENIODATA, b); |
| b = inDAC1064(PMINFO M1064_XGENIOCTRL) | 1; |
| outDAC1064(PMINFO M1064_XGENIOCTRL, b); |
| } |
| } |
| } |
| #endif |
| |
| #ifdef CONFIG_FB_MATROX_MYSTIQUE |
| static void MGA1064_restore(WPMINFO2) { |
| int i; |
| struct matrox_hw_state* hw = &ACCESS_FBINFO(hw); |
| |
| CRITFLAGS |
| |
| DBG(__FUNCTION__) |
| |
| CRITBEGIN |
| |
| pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION_REG, hw->MXoptionReg); |
| mga_outb(M_IEN, 0x00); |
| mga_outb(M_CACHEFLUSH, 0x00); |
| |
| CRITEND |
| |
| DAC1064_restore_1(PMINFO2); |
| matroxfb_vgaHWrestore(PMINFO2); |
| ACCESS_FBINFO(crtc1.panpos) = -1; |
| for (i = 0; i < 6; i++) |
| mga_setr(M_EXTVGA_INDEX, i, hw->CRTCEXT[i]); |
| DAC1064_restore_2(PMINFO2); |
| } |
| #endif |
| |
| #ifdef CONFIG_FB_MATROX_G |
| static void MGAG100_restore(WPMINFO2) { |
| int i; |
| struct matrox_hw_state* hw = &ACCESS_FBINFO(hw); |
| |
| CRITFLAGS |
| |
| DBG(__FUNCTION__) |
| |
| CRITBEGIN |
| |
| pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION_REG, hw->MXoptionReg); |
| CRITEND |
| |
| DAC1064_restore_1(PMINFO2); |
| matroxfb_vgaHWrestore(PMINFO2); |
| #ifdef CONFIG_FB_MATROX_32MB |
| if (ACCESS_FBINFO(devflags.support32MB)) |
| mga_setr(M_EXTVGA_INDEX, 8, hw->CRTCEXT[8]); |
| #endif |
| ACCESS_FBINFO(crtc1.panpos) = -1; |
| for (i = 0; i < 6; i++) |
| mga_setr(M_EXTVGA_INDEX, i, hw->CRTCEXT[i]); |
| DAC1064_restore_2(PMINFO2); |
| } |
| #endif |
| |
| #ifdef CONFIG_FB_MATROX_MYSTIQUE |
| struct matrox_switch matrox_mystique = { |
| MGA1064_preinit, MGA1064_reset, MGA1064_init, MGA1064_restore, |
| }; |
| EXPORT_SYMBOL(matrox_mystique); |
| #endif |
| |
| #ifdef CONFIG_FB_MATROX_G |
| struct matrox_switch matrox_G100 = { |
| MGAG100_preinit, MGAG100_reset, MGAG100_init, MGAG100_restore, |
| }; |
| EXPORT_SYMBOL(matrox_G100); |
| #endif |
| |
| #ifdef NEED_DAC1064 |
| EXPORT_SYMBOL(DAC1064_global_init); |
| EXPORT_SYMBOL(DAC1064_global_restore); |
| #endif |
| MODULE_LICENSE("GPL"); |