| /* |
| * Copyright (C) 2007 Mathieu Desnoyers |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/types.h> |
| #include <linux/jhash.h> |
| #include <linux/list.h> |
| #include <linux/rcupdate.h> |
| #include <linux/marker.h> |
| #include <linux/err.h> |
| |
| extern struct marker __start___markers[]; |
| extern struct marker __stop___markers[]; |
| |
| /* Set to 1 to enable marker debug output */ |
| const int marker_debug; |
| |
| /* |
| * markers_mutex nests inside module_mutex. Markers mutex protects the builtin |
| * and module markers and the hash table. |
| */ |
| static DEFINE_MUTEX(markers_mutex); |
| |
| /* |
| * Marker hash table, containing the active markers. |
| * Protected by module_mutex. |
| */ |
| #define MARKER_HASH_BITS 6 |
| #define MARKER_TABLE_SIZE (1 << MARKER_HASH_BITS) |
| |
| /* |
| * Note about RCU : |
| * It is used to make sure every handler has finished using its private data |
| * between two consecutive operation (add or remove) on a given marker. It is |
| * also used to delay the free of multiple probes array until a quiescent state |
| * is reached. |
| * marker entries modifications are protected by the markers_mutex. |
| */ |
| struct marker_entry { |
| struct hlist_node hlist; |
| char *format; |
| void (*call)(const struct marker *mdata, /* Probe wrapper */ |
| void *call_private, const char *fmt, ...); |
| struct marker_probe_closure single; |
| struct marker_probe_closure *multi; |
| int refcount; /* Number of times armed. 0 if disarmed. */ |
| struct rcu_head rcu; |
| void *oldptr; |
| unsigned char rcu_pending:1; |
| unsigned char ptype:1; |
| char name[0]; /* Contains name'\0'format'\0' */ |
| }; |
| |
| static struct hlist_head marker_table[MARKER_TABLE_SIZE]; |
| |
| /** |
| * __mark_empty_function - Empty probe callback |
| * @probe_private: probe private data |
| * @call_private: call site private data |
| * @fmt: format string |
| * @...: variable argument list |
| * |
| * Empty callback provided as a probe to the markers. By providing this to a |
| * disabled marker, we make sure the execution flow is always valid even |
| * though the function pointer change and the marker enabling are two distinct |
| * operations that modifies the execution flow of preemptible code. |
| */ |
| void __mark_empty_function(void *probe_private, void *call_private, |
| const char *fmt, va_list *args) |
| { |
| } |
| EXPORT_SYMBOL_GPL(__mark_empty_function); |
| |
| /* |
| * marker_probe_cb Callback that prepares the variable argument list for probes. |
| * @mdata: pointer of type struct marker |
| * @call_private: caller site private data |
| * @fmt: format string |
| * @...: Variable argument list. |
| * |
| * Since we do not use "typical" pointer based RCU in the 1 argument case, we |
| * need to put a full smp_rmb() in this branch. This is why we do not use |
| * rcu_dereference() for the pointer read. |
| */ |
| void marker_probe_cb(const struct marker *mdata, void *call_private, |
| const char *fmt, ...) |
| { |
| va_list args; |
| char ptype; |
| |
| /* |
| * disabling preemption to make sure the teardown of the callbacks can |
| * be done correctly when they are in modules and they insure RCU read |
| * coherency. |
| */ |
| preempt_disable(); |
| ptype = ACCESS_ONCE(mdata->ptype); |
| if (likely(!ptype)) { |
| marker_probe_func *func; |
| /* Must read the ptype before ptr. They are not data dependant, |
| * so we put an explicit smp_rmb() here. */ |
| smp_rmb(); |
| func = ACCESS_ONCE(mdata->single.func); |
| /* Must read the ptr before private data. They are not data |
| * dependant, so we put an explicit smp_rmb() here. */ |
| smp_rmb(); |
| va_start(args, fmt); |
| func(mdata->single.probe_private, call_private, fmt, &args); |
| va_end(args); |
| } else { |
| struct marker_probe_closure *multi; |
| int i; |
| /* |
| * multi points to an array, therefore accessing the array |
| * depends on reading multi. However, even in this case, |
| * we must insure that the pointer is read _before_ the array |
| * data. Same as rcu_dereference, but we need a full smp_rmb() |
| * in the fast path, so put the explicit barrier here. |
| */ |
| smp_read_barrier_depends(); |
| multi = ACCESS_ONCE(mdata->multi); |
| for (i = 0; multi[i].func; i++) { |
| va_start(args, fmt); |
| multi[i].func(multi[i].probe_private, call_private, fmt, |
| &args); |
| va_end(args); |
| } |
| } |
| preempt_enable(); |
| } |
| EXPORT_SYMBOL_GPL(marker_probe_cb); |
| |
| /* |
| * marker_probe_cb Callback that does not prepare the variable argument list. |
| * @mdata: pointer of type struct marker |
| * @call_private: caller site private data |
| * @fmt: format string |
| * @...: Variable argument list. |
| * |
| * Should be connected to markers "MARK_NOARGS". |
| */ |
| void marker_probe_cb_noarg(const struct marker *mdata, |
| void *call_private, const char *fmt, ...) |
| { |
| va_list args; /* not initialized */ |
| char ptype; |
| |
| preempt_disable(); |
| ptype = ACCESS_ONCE(mdata->ptype); |
| if (likely(!ptype)) { |
| marker_probe_func *func; |
| /* Must read the ptype before ptr. They are not data dependant, |
| * so we put an explicit smp_rmb() here. */ |
| smp_rmb(); |
| func = ACCESS_ONCE(mdata->single.func); |
| /* Must read the ptr before private data. They are not data |
| * dependant, so we put an explicit smp_rmb() here. */ |
| smp_rmb(); |
| func(mdata->single.probe_private, call_private, fmt, &args); |
| } else { |
| struct marker_probe_closure *multi; |
| int i; |
| /* |
| * multi points to an array, therefore accessing the array |
| * depends on reading multi. However, even in this case, |
| * we must insure that the pointer is read _before_ the array |
| * data. Same as rcu_dereference, but we need a full smp_rmb() |
| * in the fast path, so put the explicit barrier here. |
| */ |
| smp_read_barrier_depends(); |
| multi = ACCESS_ONCE(mdata->multi); |
| for (i = 0; multi[i].func; i++) |
| multi[i].func(multi[i].probe_private, call_private, fmt, |
| &args); |
| } |
| preempt_enable(); |
| } |
| EXPORT_SYMBOL_GPL(marker_probe_cb_noarg); |
| |
| static void free_old_closure(struct rcu_head *head) |
| { |
| struct marker_entry *entry = container_of(head, |
| struct marker_entry, rcu); |
| kfree(entry->oldptr); |
| /* Make sure we free the data before setting the pending flag to 0 */ |
| smp_wmb(); |
| entry->rcu_pending = 0; |
| } |
| |
| static void debug_print_probes(struct marker_entry *entry) |
| { |
| int i; |
| |
| if (!marker_debug) |
| return; |
| |
| if (!entry->ptype) { |
| printk(KERN_DEBUG "Single probe : %p %p\n", |
| entry->single.func, |
| entry->single.probe_private); |
| } else { |
| for (i = 0; entry->multi[i].func; i++) |
| printk(KERN_DEBUG "Multi probe %d : %p %p\n", i, |
| entry->multi[i].func, |
| entry->multi[i].probe_private); |
| } |
| } |
| |
| static struct marker_probe_closure * |
| marker_entry_add_probe(struct marker_entry *entry, |
| marker_probe_func *probe, void *probe_private) |
| { |
| int nr_probes = 0; |
| struct marker_probe_closure *old, *new; |
| |
| WARN_ON(!probe); |
| |
| debug_print_probes(entry); |
| old = entry->multi; |
| if (!entry->ptype) { |
| if (entry->single.func == probe && |
| entry->single.probe_private == probe_private) |
| return ERR_PTR(-EBUSY); |
| if (entry->single.func == __mark_empty_function) { |
| /* 0 -> 1 probes */ |
| entry->single.func = probe; |
| entry->single.probe_private = probe_private; |
| entry->refcount = 1; |
| entry->ptype = 0; |
| debug_print_probes(entry); |
| return NULL; |
| } else { |
| /* 1 -> 2 probes */ |
| nr_probes = 1; |
| old = NULL; |
| } |
| } else { |
| /* (N -> N+1), (N != 0, 1) probes */ |
| for (nr_probes = 0; old[nr_probes].func; nr_probes++) |
| if (old[nr_probes].func == probe |
| && old[nr_probes].probe_private |
| == probe_private) |
| return ERR_PTR(-EBUSY); |
| } |
| /* + 2 : one for new probe, one for NULL func */ |
| new = kzalloc((nr_probes + 2) * sizeof(struct marker_probe_closure), |
| GFP_KERNEL); |
| if (new == NULL) |
| return ERR_PTR(-ENOMEM); |
| if (!old) |
| new[0] = entry->single; |
| else |
| memcpy(new, old, |
| nr_probes * sizeof(struct marker_probe_closure)); |
| new[nr_probes].func = probe; |
| new[nr_probes].probe_private = probe_private; |
| entry->refcount = nr_probes + 1; |
| entry->multi = new; |
| entry->ptype = 1; |
| debug_print_probes(entry); |
| return old; |
| } |
| |
| static struct marker_probe_closure * |
| marker_entry_remove_probe(struct marker_entry *entry, |
| marker_probe_func *probe, void *probe_private) |
| { |
| int nr_probes = 0, nr_del = 0, i; |
| struct marker_probe_closure *old, *new; |
| |
| old = entry->multi; |
| |
| debug_print_probes(entry); |
| if (!entry->ptype) { |
| /* 0 -> N is an error */ |
| WARN_ON(entry->single.func == __mark_empty_function); |
| /* 1 -> 0 probes */ |
| WARN_ON(probe && entry->single.func != probe); |
| WARN_ON(entry->single.probe_private != probe_private); |
| entry->single.func = __mark_empty_function; |
| entry->refcount = 0; |
| entry->ptype = 0; |
| debug_print_probes(entry); |
| return NULL; |
| } else { |
| /* (N -> M), (N > 1, M >= 0) probes */ |
| for (nr_probes = 0; old[nr_probes].func; nr_probes++) { |
| if ((!probe || old[nr_probes].func == probe) |
| && old[nr_probes].probe_private |
| == probe_private) |
| nr_del++; |
| } |
| } |
| |
| if (nr_probes - nr_del == 0) { |
| /* N -> 0, (N > 1) */ |
| entry->single.func = __mark_empty_function; |
| entry->refcount = 0; |
| entry->ptype = 0; |
| } else if (nr_probes - nr_del == 1) { |
| /* N -> 1, (N > 1) */ |
| for (i = 0; old[i].func; i++) |
| if ((probe && old[i].func != probe) || |
| old[i].probe_private != probe_private) |
| entry->single = old[i]; |
| entry->refcount = 1; |
| entry->ptype = 0; |
| } else { |
| int j = 0; |
| /* N -> M, (N > 1, M > 1) */ |
| /* + 1 for NULL */ |
| new = kzalloc((nr_probes - nr_del + 1) |
| * sizeof(struct marker_probe_closure), GFP_KERNEL); |
| if (new == NULL) |
| return ERR_PTR(-ENOMEM); |
| for (i = 0; old[i].func; i++) |
| if ((probe && old[i].func != probe) || |
| old[i].probe_private != probe_private) |
| new[j++] = old[i]; |
| entry->refcount = nr_probes - nr_del; |
| entry->ptype = 1; |
| entry->multi = new; |
| } |
| debug_print_probes(entry); |
| return old; |
| } |
| |
| /* |
| * Get marker if the marker is present in the marker hash table. |
| * Must be called with markers_mutex held. |
| * Returns NULL if not present. |
| */ |
| static struct marker_entry *get_marker(const char *name) |
| { |
| struct hlist_head *head; |
| struct hlist_node *node; |
| struct marker_entry *e; |
| u32 hash = jhash(name, strlen(name), 0); |
| |
| head = &marker_table[hash & ((1 << MARKER_HASH_BITS)-1)]; |
| hlist_for_each_entry(e, node, head, hlist) { |
| if (!strcmp(name, e->name)) |
| return e; |
| } |
| return NULL; |
| } |
| |
| /* |
| * Add the marker to the marker hash table. Must be called with markers_mutex |
| * held. |
| */ |
| static struct marker_entry *add_marker(const char *name, const char *format) |
| { |
| struct hlist_head *head; |
| struct hlist_node *node; |
| struct marker_entry *e; |
| size_t name_len = strlen(name) + 1; |
| size_t format_len = 0; |
| u32 hash = jhash(name, name_len-1, 0); |
| |
| if (format) |
| format_len = strlen(format) + 1; |
| head = &marker_table[hash & ((1 << MARKER_HASH_BITS)-1)]; |
| hlist_for_each_entry(e, node, head, hlist) { |
| if (!strcmp(name, e->name)) { |
| printk(KERN_NOTICE |
| "Marker %s busy\n", name); |
| return ERR_PTR(-EBUSY); /* Already there */ |
| } |
| } |
| /* |
| * Using kmalloc here to allocate a variable length element. Could |
| * cause some memory fragmentation if overused. |
| */ |
| e = kmalloc(sizeof(struct marker_entry) + name_len + format_len, |
| GFP_KERNEL); |
| if (!e) |
| return ERR_PTR(-ENOMEM); |
| memcpy(&e->name[0], name, name_len); |
| if (format) { |
| e->format = &e->name[name_len]; |
| memcpy(e->format, format, format_len); |
| if (strcmp(e->format, MARK_NOARGS) == 0) |
| e->call = marker_probe_cb_noarg; |
| else |
| e->call = marker_probe_cb; |
| trace_mark(core_marker_format, "name %s format %s", |
| e->name, e->format); |
| } else { |
| e->format = NULL; |
| e->call = marker_probe_cb; |
| } |
| e->single.func = __mark_empty_function; |
| e->single.probe_private = NULL; |
| e->multi = NULL; |
| e->ptype = 0; |
| e->refcount = 0; |
| e->rcu_pending = 0; |
| hlist_add_head(&e->hlist, head); |
| return e; |
| } |
| |
| /* |
| * Remove the marker from the marker hash table. Must be called with mutex_lock |
| * held. |
| */ |
| static int remove_marker(const char *name) |
| { |
| struct hlist_head *head; |
| struct hlist_node *node; |
| struct marker_entry *e; |
| int found = 0; |
| size_t len = strlen(name) + 1; |
| u32 hash = jhash(name, len-1, 0); |
| |
| head = &marker_table[hash & ((1 << MARKER_HASH_BITS)-1)]; |
| hlist_for_each_entry(e, node, head, hlist) { |
| if (!strcmp(name, e->name)) { |
| found = 1; |
| break; |
| } |
| } |
| if (!found) |
| return -ENOENT; |
| if (e->single.func != __mark_empty_function) |
| return -EBUSY; |
| hlist_del(&e->hlist); |
| /* Make sure the call_rcu has been executed */ |
| if (e->rcu_pending) |
| rcu_barrier(); |
| kfree(e); |
| return 0; |
| } |
| |
| /* |
| * Set the mark_entry format to the format found in the element. |
| */ |
| static int marker_set_format(struct marker_entry **entry, const char *format) |
| { |
| struct marker_entry *e; |
| size_t name_len = strlen((*entry)->name) + 1; |
| size_t format_len = strlen(format) + 1; |
| |
| |
| e = kmalloc(sizeof(struct marker_entry) + name_len + format_len, |
| GFP_KERNEL); |
| if (!e) |
| return -ENOMEM; |
| memcpy(&e->name[0], (*entry)->name, name_len); |
| e->format = &e->name[name_len]; |
| memcpy(e->format, format, format_len); |
| if (strcmp(e->format, MARK_NOARGS) == 0) |
| e->call = marker_probe_cb_noarg; |
| else |
| e->call = marker_probe_cb; |
| e->single = (*entry)->single; |
| e->multi = (*entry)->multi; |
| e->ptype = (*entry)->ptype; |
| e->refcount = (*entry)->refcount; |
| e->rcu_pending = 0; |
| hlist_add_before(&e->hlist, &(*entry)->hlist); |
| hlist_del(&(*entry)->hlist); |
| /* Make sure the call_rcu has been executed */ |
| if ((*entry)->rcu_pending) |
| rcu_barrier(); |
| kfree(*entry); |
| *entry = e; |
| trace_mark(core_marker_format, "name %s format %s", |
| e->name, e->format); |
| return 0; |
| } |
| |
| /* |
| * Sets the probe callback corresponding to one marker. |
| */ |
| static int set_marker(struct marker_entry **entry, struct marker *elem, |
| int active) |
| { |
| int ret; |
| WARN_ON(strcmp((*entry)->name, elem->name) != 0); |
| |
| if ((*entry)->format) { |
| if (strcmp((*entry)->format, elem->format) != 0) { |
| printk(KERN_NOTICE |
| "Format mismatch for probe %s " |
| "(%s), marker (%s)\n", |
| (*entry)->name, |
| (*entry)->format, |
| elem->format); |
| return -EPERM; |
| } |
| } else { |
| ret = marker_set_format(entry, elem->format); |
| if (ret) |
| return ret; |
| } |
| |
| /* |
| * probe_cb setup (statically known) is done here. It is |
| * asynchronous with the rest of execution, therefore we only |
| * pass from a "safe" callback (with argument) to an "unsafe" |
| * callback (does not set arguments). |
| */ |
| elem->call = (*entry)->call; |
| /* |
| * Sanity check : |
| * We only update the single probe private data when the ptr is |
| * set to a _non_ single probe! (0 -> 1 and N -> 1, N != 1) |
| */ |
| WARN_ON(elem->single.func != __mark_empty_function |
| && elem->single.probe_private |
| != (*entry)->single.probe_private && |
| !elem->ptype); |
| elem->single.probe_private = (*entry)->single.probe_private; |
| /* |
| * Make sure the private data is valid when we update the |
| * single probe ptr. |
| */ |
| smp_wmb(); |
| elem->single.func = (*entry)->single.func; |
| /* |
| * We also make sure that the new probe callbacks array is consistent |
| * before setting a pointer to it. |
| */ |
| rcu_assign_pointer(elem->multi, (*entry)->multi); |
| /* |
| * Update the function or multi probe array pointer before setting the |
| * ptype. |
| */ |
| smp_wmb(); |
| elem->ptype = (*entry)->ptype; |
| elem->state = active; |
| |
| return 0; |
| } |
| |
| /* |
| * Disable a marker and its probe callback. |
| * Note: only after a synchronize_sched() issued after setting elem->call to the |
| * empty function insures that the original callback is not used anymore. This |
| * insured by preemption disabling around the call site. |
| */ |
| static void disable_marker(struct marker *elem) |
| { |
| /* leave "call" as is. It is known statically. */ |
| elem->state = 0; |
| elem->single.func = __mark_empty_function; |
| /* Update the function before setting the ptype */ |
| smp_wmb(); |
| elem->ptype = 0; /* single probe */ |
| /* |
| * Leave the private data and id there, because removal is racy and |
| * should be done only after a synchronize_sched(). These are never used |
| * until the next initialization anyway. |
| */ |
| } |
| |
| /** |
| * marker_update_probe_range - Update a probe range |
| * @begin: beginning of the range |
| * @end: end of the range |
| * |
| * Updates the probe callback corresponding to a range of markers. |
| */ |
| void marker_update_probe_range(struct marker *begin, |
| struct marker *end) |
| { |
| struct marker *iter; |
| struct marker_entry *mark_entry; |
| |
| mutex_lock(&markers_mutex); |
| for (iter = begin; iter < end; iter++) { |
| mark_entry = get_marker(iter->name); |
| if (mark_entry) { |
| set_marker(&mark_entry, iter, |
| !!mark_entry->refcount); |
| /* |
| * ignore error, continue |
| */ |
| } else { |
| disable_marker(iter); |
| } |
| } |
| mutex_unlock(&markers_mutex); |
| } |
| |
| /* |
| * Update probes, removing the faulty probes. |
| * Issues a synchronize_sched() when no reference to the module passed |
| * as parameter is found in the probes so the probe module can be |
| * safely unloaded from now on. |
| * |
| * Internal callback only changed before the first probe is connected to it. |
| * Single probe private data can only be changed on 0 -> 1 and 2 -> 1 |
| * transitions. All other transitions will leave the old private data valid. |
| * This makes the non-atomicity of the callback/private data updates valid. |
| * |
| * "special case" updates : |
| * 0 -> 1 callback |
| * 1 -> 0 callback |
| * 1 -> 2 callbacks |
| * 2 -> 1 callbacks |
| * Other updates all behave the same, just like the 2 -> 3 or 3 -> 2 updates. |
| * Site effect : marker_set_format may delete the marker entry (creating a |
| * replacement). |
| */ |
| static void marker_update_probes(void) |
| { |
| /* Core kernel markers */ |
| marker_update_probe_range(__start___markers, __stop___markers); |
| /* Markers in modules. */ |
| module_update_markers(); |
| } |
| |
| /** |
| * marker_probe_register - Connect a probe to a marker |
| * @name: marker name |
| * @format: format string |
| * @probe: probe handler |
| * @probe_private: probe private data |
| * |
| * private data must be a valid allocated memory address, or NULL. |
| * Returns 0 if ok, error value on error. |
| * The probe address must at least be aligned on the architecture pointer size. |
| */ |
| int marker_probe_register(const char *name, const char *format, |
| marker_probe_func *probe, void *probe_private) |
| { |
| struct marker_entry *entry; |
| int ret = 0; |
| struct marker_probe_closure *old; |
| |
| mutex_lock(&markers_mutex); |
| entry = get_marker(name); |
| if (!entry) { |
| entry = add_marker(name, format); |
| if (IS_ERR(entry)) { |
| ret = PTR_ERR(entry); |
| goto end; |
| } |
| } |
| /* |
| * If we detect that a call_rcu is pending for this marker, |
| * make sure it's executed now. |
| */ |
| if (entry->rcu_pending) |
| rcu_barrier(); |
| old = marker_entry_add_probe(entry, probe, probe_private); |
| if (IS_ERR(old)) { |
| ret = PTR_ERR(old); |
| goto end; |
| } |
| mutex_unlock(&markers_mutex); |
| marker_update_probes(); /* may update entry */ |
| mutex_lock(&markers_mutex); |
| entry = get_marker(name); |
| WARN_ON(!entry); |
| entry->oldptr = old; |
| entry->rcu_pending = 1; |
| /* write rcu_pending before calling the RCU callback */ |
| smp_wmb(); |
| call_rcu(&entry->rcu, free_old_closure); |
| end: |
| mutex_unlock(&markers_mutex); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(marker_probe_register); |
| |
| /** |
| * marker_probe_unregister - Disconnect a probe from a marker |
| * @name: marker name |
| * @probe: probe function pointer |
| * @probe_private: probe private data |
| * |
| * Returns the private data given to marker_probe_register, or an ERR_PTR(). |
| * We do not need to call a synchronize_sched to make sure the probes have |
| * finished running before doing a module unload, because the module unload |
| * itself uses stop_machine(), which insures that every preempt disabled section |
| * have finished. |
| */ |
| int marker_probe_unregister(const char *name, |
| marker_probe_func *probe, void *probe_private) |
| { |
| struct marker_entry *entry; |
| struct marker_probe_closure *old; |
| int ret = -ENOENT; |
| |
| mutex_lock(&markers_mutex); |
| entry = get_marker(name); |
| if (!entry) |
| goto end; |
| if (entry->rcu_pending) |
| rcu_barrier(); |
| old = marker_entry_remove_probe(entry, probe, probe_private); |
| mutex_unlock(&markers_mutex); |
| marker_update_probes(); /* may update entry */ |
| mutex_lock(&markers_mutex); |
| entry = get_marker(name); |
| if (!entry) |
| goto end; |
| entry->oldptr = old; |
| entry->rcu_pending = 1; |
| /* write rcu_pending before calling the RCU callback */ |
| smp_wmb(); |
| call_rcu(&entry->rcu, free_old_closure); |
| remove_marker(name); /* Ignore busy error message */ |
| ret = 0; |
| end: |
| mutex_unlock(&markers_mutex); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(marker_probe_unregister); |
| |
| static struct marker_entry * |
| get_marker_from_private_data(marker_probe_func *probe, void *probe_private) |
| { |
| struct marker_entry *entry; |
| unsigned int i; |
| struct hlist_head *head; |
| struct hlist_node *node; |
| |
| for (i = 0; i < MARKER_TABLE_SIZE; i++) { |
| head = &marker_table[i]; |
| hlist_for_each_entry(entry, node, head, hlist) { |
| if (!entry->ptype) { |
| if (entry->single.func == probe |
| && entry->single.probe_private |
| == probe_private) |
| return entry; |
| } else { |
| struct marker_probe_closure *closure; |
| closure = entry->multi; |
| for (i = 0; closure[i].func; i++) { |
| if (closure[i].func == probe && |
| closure[i].probe_private |
| == probe_private) |
| return entry; |
| } |
| } |
| } |
| } |
| return NULL; |
| } |
| |
| /** |
| * marker_probe_unregister_private_data - Disconnect a probe from a marker |
| * @probe: probe function |
| * @probe_private: probe private data |
| * |
| * Unregister a probe by providing the registered private data. |
| * Only removes the first marker found in hash table. |
| * Return 0 on success or error value. |
| * We do not need to call a synchronize_sched to make sure the probes have |
| * finished running before doing a module unload, because the module unload |
| * itself uses stop_machine(), which insures that every preempt disabled section |
| * have finished. |
| */ |
| int marker_probe_unregister_private_data(marker_probe_func *probe, |
| void *probe_private) |
| { |
| struct marker_entry *entry; |
| int ret = 0; |
| struct marker_probe_closure *old; |
| |
| mutex_lock(&markers_mutex); |
| entry = get_marker_from_private_data(probe, probe_private); |
| if (!entry) { |
| ret = -ENOENT; |
| goto end; |
| } |
| if (entry->rcu_pending) |
| rcu_barrier(); |
| old = marker_entry_remove_probe(entry, NULL, probe_private); |
| mutex_unlock(&markers_mutex); |
| marker_update_probes(); /* may update entry */ |
| mutex_lock(&markers_mutex); |
| entry = get_marker_from_private_data(probe, probe_private); |
| WARN_ON(!entry); |
| entry->oldptr = old; |
| entry->rcu_pending = 1; |
| /* write rcu_pending before calling the RCU callback */ |
| smp_wmb(); |
| call_rcu(&entry->rcu, free_old_closure); |
| remove_marker(entry->name); /* Ignore busy error message */ |
| end: |
| mutex_unlock(&markers_mutex); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(marker_probe_unregister_private_data); |
| |
| /** |
| * marker_get_private_data - Get a marker's probe private data |
| * @name: marker name |
| * @probe: probe to match |
| * @num: get the nth matching probe's private data |
| * |
| * Returns the nth private data pointer (starting from 0) matching, or an |
| * ERR_PTR. |
| * Returns the private data pointer, or an ERR_PTR. |
| * The private data pointer should _only_ be dereferenced if the caller is the |
| * owner of the data, or its content could vanish. This is mostly used to |
| * confirm that a caller is the owner of a registered probe. |
| */ |
| void *marker_get_private_data(const char *name, marker_probe_func *probe, |
| int num) |
| { |
| struct hlist_head *head; |
| struct hlist_node *node; |
| struct marker_entry *e; |
| size_t name_len = strlen(name) + 1; |
| u32 hash = jhash(name, name_len-1, 0); |
| int i; |
| |
| head = &marker_table[hash & ((1 << MARKER_HASH_BITS)-1)]; |
| hlist_for_each_entry(e, node, head, hlist) { |
| if (!strcmp(name, e->name)) { |
| if (!e->ptype) { |
| if (num == 0 && e->single.func == probe) |
| return e->single.probe_private; |
| else |
| break; |
| } else { |
| struct marker_probe_closure *closure; |
| int match = 0; |
| closure = e->multi; |
| for (i = 0; closure[i].func; i++) { |
| if (closure[i].func != probe) |
| continue; |
| if (match++ == num) |
| return closure[i].probe_private; |
| } |
| } |
| } |
| } |
| return ERR_PTR(-ENOENT); |
| } |
| EXPORT_SYMBOL_GPL(marker_get_private_data); |