| /* |
| * Realtek RTL2832 DVB-T demodulator driver |
| * |
| * Copyright (C) 2012 Thomas Mair <thomas.mair86@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
| */ |
| |
| #include "rtl2832_priv.h" |
| #include "dvb_math.h" |
| #include <linux/bitops.h> |
| |
| int rtl2832_debug; |
| module_param_named(debug, rtl2832_debug, int, 0644); |
| MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); |
| |
| #define REG_MASK(b) (BIT(b + 1) - 1) |
| |
| static const struct rtl2832_reg_entry registers[] = { |
| [DVBT_SOFT_RST] = {0x1, 0x1, 2, 2}, |
| [DVBT_IIC_REPEAT] = {0x1, 0x1, 3, 3}, |
| [DVBT_TR_WAIT_MIN_8K] = {0x1, 0x88, 11, 2}, |
| [DVBT_RSD_BER_FAIL_VAL] = {0x1, 0x8f, 15, 0}, |
| [DVBT_EN_BK_TRK] = {0x1, 0xa6, 7, 7}, |
| [DVBT_AD_EN_REG] = {0x0, 0x8, 7, 7}, |
| [DVBT_AD_EN_REG1] = {0x0, 0x8, 6, 6}, |
| [DVBT_EN_BBIN] = {0x1, 0xb1, 0, 0}, |
| [DVBT_MGD_THD0] = {0x1, 0x95, 7, 0}, |
| [DVBT_MGD_THD1] = {0x1, 0x96, 7, 0}, |
| [DVBT_MGD_THD2] = {0x1, 0x97, 7, 0}, |
| [DVBT_MGD_THD3] = {0x1, 0x98, 7, 0}, |
| [DVBT_MGD_THD4] = {0x1, 0x99, 7, 0}, |
| [DVBT_MGD_THD5] = {0x1, 0x9a, 7, 0}, |
| [DVBT_MGD_THD6] = {0x1, 0x9b, 7, 0}, |
| [DVBT_MGD_THD7] = {0x1, 0x9c, 7, 0}, |
| [DVBT_EN_CACQ_NOTCH] = {0x1, 0x61, 4, 4}, |
| [DVBT_AD_AV_REF] = {0x0, 0x9, 6, 0}, |
| [DVBT_REG_PI] = {0x0, 0xa, 2, 0}, |
| [DVBT_PIP_ON] = {0x0, 0x21, 3, 3}, |
| [DVBT_SCALE1_B92] = {0x2, 0x92, 7, 0}, |
| [DVBT_SCALE1_B93] = {0x2, 0x93, 7, 0}, |
| [DVBT_SCALE1_BA7] = {0x2, 0xa7, 7, 0}, |
| [DVBT_SCALE1_BA9] = {0x2, 0xa9, 7, 0}, |
| [DVBT_SCALE1_BAA] = {0x2, 0xaa, 7, 0}, |
| [DVBT_SCALE1_BAB] = {0x2, 0xab, 7, 0}, |
| [DVBT_SCALE1_BAC] = {0x2, 0xac, 7, 0}, |
| [DVBT_SCALE1_BB0] = {0x2, 0xb0, 7, 0}, |
| [DVBT_SCALE1_BB1] = {0x2, 0xb1, 7, 0}, |
| [DVBT_KB_P1] = {0x1, 0x64, 3, 1}, |
| [DVBT_KB_P2] = {0x1, 0x64, 6, 4}, |
| [DVBT_KB_P3] = {0x1, 0x65, 2, 0}, |
| [DVBT_OPT_ADC_IQ] = {0x0, 0x6, 5, 4}, |
| [DVBT_AD_AVI] = {0x0, 0x9, 1, 0}, |
| [DVBT_AD_AVQ] = {0x0, 0x9, 3, 2}, |
| [DVBT_K1_CR_STEP12] = {0x2, 0xad, 9, 4}, |
| [DVBT_TRK_KS_P2] = {0x1, 0x6f, 2, 0}, |
| [DVBT_TRK_KS_I2] = {0x1, 0x70, 5, 3}, |
| [DVBT_TR_THD_SET2] = {0x1, 0x72, 3, 0}, |
| [DVBT_TRK_KC_P2] = {0x1, 0x73, 5, 3}, |
| [DVBT_TRK_KC_I2] = {0x1, 0x75, 2, 0}, |
| [DVBT_CR_THD_SET2] = {0x1, 0x76, 7, 6}, |
| [DVBT_PSET_IFFREQ] = {0x1, 0x19, 21, 0}, |
| [DVBT_SPEC_INV] = {0x1, 0x15, 0, 0}, |
| [DVBT_RSAMP_RATIO] = {0x1, 0x9f, 27, 2}, |
| [DVBT_CFREQ_OFF_RATIO] = {0x1, 0x9d, 23, 4}, |
| [DVBT_FSM_STAGE] = {0x3, 0x51, 6, 3}, |
| [DVBT_RX_CONSTEL] = {0x3, 0x3c, 3, 2}, |
| [DVBT_RX_HIER] = {0x3, 0x3c, 6, 4}, |
| [DVBT_RX_C_RATE_LP] = {0x3, 0x3d, 2, 0}, |
| [DVBT_RX_C_RATE_HP] = {0x3, 0x3d, 5, 3}, |
| [DVBT_GI_IDX] = {0x3, 0x51, 1, 0}, |
| [DVBT_FFT_MODE_IDX] = {0x3, 0x51, 2, 2}, |
| [DVBT_RSD_BER_EST] = {0x3, 0x4e, 15, 0}, |
| [DVBT_CE_EST_EVM] = {0x4, 0xc, 15, 0}, |
| [DVBT_RF_AGC_VAL] = {0x3, 0x5b, 13, 0}, |
| [DVBT_IF_AGC_VAL] = {0x3, 0x59, 13, 0}, |
| [DVBT_DAGC_VAL] = {0x3, 0x5, 7, 0}, |
| [DVBT_SFREQ_OFF] = {0x3, 0x18, 13, 0}, |
| [DVBT_CFREQ_OFF] = {0x3, 0x5f, 17, 0}, |
| [DVBT_POLAR_RF_AGC] = {0x0, 0xe, 1, 1}, |
| [DVBT_POLAR_IF_AGC] = {0x0, 0xe, 0, 0}, |
| [DVBT_AAGC_HOLD] = {0x1, 0x4, 5, 5}, |
| [DVBT_EN_RF_AGC] = {0x1, 0x4, 6, 6}, |
| [DVBT_EN_IF_AGC] = {0x1, 0x4, 7, 7}, |
| [DVBT_IF_AGC_MIN] = {0x1, 0x8, 7, 0}, |
| [DVBT_IF_AGC_MAX] = {0x1, 0x9, 7, 0}, |
| [DVBT_RF_AGC_MIN] = {0x1, 0xa, 7, 0}, |
| [DVBT_RF_AGC_MAX] = {0x1, 0xb, 7, 0}, |
| [DVBT_IF_AGC_MAN] = {0x1, 0xc, 6, 6}, |
| [DVBT_IF_AGC_MAN_VAL] = {0x1, 0xc, 13, 0}, |
| [DVBT_RF_AGC_MAN] = {0x1, 0xe, 6, 6}, |
| [DVBT_RF_AGC_MAN_VAL] = {0x1, 0xe, 13, 0}, |
| [DVBT_DAGC_TRG_VAL] = {0x1, 0x12, 7, 0}, |
| [DVBT_AGC_TARG_VAL_0] = {0x1, 0x2, 0, 0}, |
| [DVBT_AGC_TARG_VAL_8_1] = {0x1, 0x3, 7, 0}, |
| [DVBT_AAGC_LOOP_GAIN] = {0x1, 0xc7, 5, 1}, |
| [DVBT_LOOP_GAIN2_3_0] = {0x1, 0x4, 4, 1}, |
| [DVBT_LOOP_GAIN2_4] = {0x1, 0x5, 7, 7}, |
| [DVBT_LOOP_GAIN3] = {0x1, 0xc8, 4, 0}, |
| [DVBT_VTOP1] = {0x1, 0x6, 5, 0}, |
| [DVBT_VTOP2] = {0x1, 0xc9, 5, 0}, |
| [DVBT_VTOP3] = {0x1, 0xca, 5, 0}, |
| [DVBT_KRF1] = {0x1, 0xcb, 7, 0}, |
| [DVBT_KRF2] = {0x1, 0x7, 7, 0}, |
| [DVBT_KRF3] = {0x1, 0xcd, 7, 0}, |
| [DVBT_KRF4] = {0x1, 0xce, 7, 0}, |
| [DVBT_EN_GI_PGA] = {0x1, 0xe5, 0, 0}, |
| [DVBT_THD_LOCK_UP] = {0x1, 0xd9, 8, 0}, |
| [DVBT_THD_LOCK_DW] = {0x1, 0xdb, 8, 0}, |
| [DVBT_THD_UP1] = {0x1, 0xdd, 7, 0}, |
| [DVBT_THD_DW1] = {0x1, 0xde, 7, 0}, |
| [DVBT_INTER_CNT_LEN] = {0x1, 0xd8, 3, 0}, |
| [DVBT_GI_PGA_STATE] = {0x1, 0xe6, 3, 3}, |
| [DVBT_EN_AGC_PGA] = {0x1, 0xd7, 0, 0}, |
| [DVBT_CKOUTPAR] = {0x1, 0x7b, 5, 5}, |
| [DVBT_CKOUT_PWR] = {0x1, 0x7b, 6, 6}, |
| [DVBT_SYNC_DUR] = {0x1, 0x7b, 7, 7}, |
| [DVBT_ERR_DUR] = {0x1, 0x7c, 0, 0}, |
| [DVBT_SYNC_LVL] = {0x1, 0x7c, 1, 1}, |
| [DVBT_ERR_LVL] = {0x1, 0x7c, 2, 2}, |
| [DVBT_VAL_LVL] = {0x1, 0x7c, 3, 3}, |
| [DVBT_SERIAL] = {0x1, 0x7c, 4, 4}, |
| [DVBT_SER_LSB] = {0x1, 0x7c, 5, 5}, |
| [DVBT_CDIV_PH0] = {0x1, 0x7d, 3, 0}, |
| [DVBT_CDIV_PH1] = {0x1, 0x7d, 7, 4}, |
| [DVBT_MPEG_IO_OPT_2_2] = {0x0, 0x6, 7, 7}, |
| [DVBT_MPEG_IO_OPT_1_0] = {0x0, 0x7, 7, 6}, |
| [DVBT_CKOUTPAR_PIP] = {0x0, 0xb7, 4, 4}, |
| [DVBT_CKOUT_PWR_PIP] = {0x0, 0xb7, 3, 3}, |
| [DVBT_SYNC_LVL_PIP] = {0x0, 0xb7, 2, 2}, |
| [DVBT_ERR_LVL_PIP] = {0x0, 0xb7, 1, 1}, |
| [DVBT_VAL_LVL_PIP] = {0x0, 0xb7, 0, 0}, |
| [DVBT_CKOUTPAR_PID] = {0x0, 0xb9, 4, 4}, |
| [DVBT_CKOUT_PWR_PID] = {0x0, 0xb9, 3, 3}, |
| [DVBT_SYNC_LVL_PID] = {0x0, 0xb9, 2, 2}, |
| [DVBT_ERR_LVL_PID] = {0x0, 0xb9, 1, 1}, |
| [DVBT_VAL_LVL_PID] = {0x0, 0xb9, 0, 0}, |
| [DVBT_SM_PASS] = {0x1, 0x93, 11, 0}, |
| [DVBT_AD7_SETTING] = {0x0, 0x11, 15, 0}, |
| [DVBT_RSSI_R] = {0x3, 0x1, 6, 0}, |
| [DVBT_ACI_DET_IND] = {0x3, 0x12, 0, 0}, |
| [DVBT_REG_MON] = {0x0, 0xd, 1, 0}, |
| [DVBT_REG_MONSEL] = {0x0, 0xd, 2, 2}, |
| [DVBT_REG_GPE] = {0x0, 0xd, 7, 7}, |
| [DVBT_REG_GPO] = {0x0, 0x10, 0, 0}, |
| [DVBT_REG_4MSEL] = {0x0, 0x13, 0, 0}, |
| }; |
| |
| /* write multiple hardware registers */ |
| static int rtl2832_wr(struct rtl2832_priv *priv, u8 reg, u8 *val, int len) |
| { |
| int ret; |
| u8 buf[1+len]; |
| struct i2c_msg msg[1] = { |
| { |
| .addr = priv->cfg.i2c_addr, |
| .flags = 0, |
| .len = 1+len, |
| .buf = buf, |
| } |
| }; |
| |
| buf[0] = reg; |
| memcpy(&buf[1], val, len); |
| |
| ret = i2c_transfer(priv->i2c, msg, 1); |
| if (ret == 1) { |
| ret = 0; |
| } else { |
| dev_warn(&priv->i2c->dev, "%s: i2c wr failed=%d reg=%02x " \ |
| "len=%d\n", KBUILD_MODNAME, ret, reg, len); |
| ret = -EREMOTEIO; |
| } |
| return ret; |
| } |
| |
| /* read multiple hardware registers */ |
| static int rtl2832_rd(struct rtl2832_priv *priv, u8 reg, u8 *val, int len) |
| { |
| int ret; |
| struct i2c_msg msg[2] = { |
| { |
| .addr = priv->cfg.i2c_addr, |
| .flags = 0, |
| .len = 1, |
| .buf = ®, |
| }, { |
| .addr = priv->cfg.i2c_addr, |
| .flags = I2C_M_RD, |
| .len = len, |
| .buf = val, |
| } |
| }; |
| |
| ret = i2c_transfer(priv->i2c, msg, 2); |
| if (ret == 2) { |
| ret = 0; |
| } else { |
| dev_warn(&priv->i2c->dev, "%s: i2c rd failed=%d reg=%02x " \ |
| "len=%d\n", KBUILD_MODNAME, ret, reg, len); |
| ret = -EREMOTEIO; |
| } |
| return ret; |
| } |
| |
| /* write multiple registers */ |
| static int rtl2832_wr_regs(struct rtl2832_priv *priv, u8 reg, u8 page, u8 *val, |
| int len) |
| { |
| int ret; |
| |
| /* switch bank if needed */ |
| if (page != priv->page) { |
| ret = rtl2832_wr(priv, 0x00, &page, 1); |
| if (ret) |
| return ret; |
| |
| priv->page = page; |
| } |
| |
| return rtl2832_wr(priv, reg, val, len); |
| } |
| |
| /* read multiple registers */ |
| static int rtl2832_rd_regs(struct rtl2832_priv *priv, u8 reg, u8 page, u8 *val, |
| int len) |
| { |
| int ret; |
| |
| /* switch bank if needed */ |
| if (page != priv->page) { |
| ret = rtl2832_wr(priv, 0x00, &page, 1); |
| if (ret) |
| return ret; |
| |
| priv->page = page; |
| } |
| |
| return rtl2832_rd(priv, reg, val, len); |
| } |
| |
| #if 0 /* currently not used */ |
| /* write single register */ |
| static int rtl2832_wr_reg(struct rtl2832_priv *priv, u8 reg, u8 page, u8 val) |
| { |
| return rtl2832_wr_regs(priv, reg, page, &val, 1); |
| } |
| #endif |
| |
| /* read single register */ |
| static int rtl2832_rd_reg(struct rtl2832_priv *priv, u8 reg, u8 page, u8 *val) |
| { |
| return rtl2832_rd_regs(priv, reg, page, val, 1); |
| } |
| |
| int rtl2832_rd_demod_reg(struct rtl2832_priv *priv, int reg, u32 *val) |
| { |
| int ret; |
| |
| u8 reg_start_addr; |
| u8 msb, lsb; |
| u8 page; |
| u8 reading[4]; |
| u32 reading_tmp; |
| int i; |
| |
| u8 len; |
| u32 mask; |
| |
| reg_start_addr = registers[reg].start_address; |
| msb = registers[reg].msb; |
| lsb = registers[reg].lsb; |
| page = registers[reg].page; |
| |
| len = (msb >> 3) + 1; |
| mask = REG_MASK(msb - lsb); |
| |
| ret = rtl2832_rd_regs(priv, reg_start_addr, page, &reading[0], len); |
| if (ret) |
| goto err; |
| |
| reading_tmp = 0; |
| for (i = 0; i < len; i++) |
| reading_tmp |= reading[i] << ((len - 1 - i) * 8); |
| |
| *val = (reading_tmp >> lsb) & mask; |
| |
| return ret; |
| |
| err: |
| dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| |
| } |
| |
| int rtl2832_wr_demod_reg(struct rtl2832_priv *priv, int reg, u32 val) |
| { |
| int ret, i; |
| u8 len; |
| u8 reg_start_addr; |
| u8 msb, lsb; |
| u8 page; |
| u32 mask; |
| |
| |
| u8 reading[4]; |
| u8 writing[4]; |
| u32 reading_tmp; |
| u32 writing_tmp; |
| |
| |
| reg_start_addr = registers[reg].start_address; |
| msb = registers[reg].msb; |
| lsb = registers[reg].lsb; |
| page = registers[reg].page; |
| |
| len = (msb >> 3) + 1; |
| mask = REG_MASK(msb - lsb); |
| |
| |
| ret = rtl2832_rd_regs(priv, reg_start_addr, page, &reading[0], len); |
| if (ret) |
| goto err; |
| |
| reading_tmp = 0; |
| for (i = 0; i < len; i++) |
| reading_tmp |= reading[i] << ((len - 1 - i) * 8); |
| |
| writing_tmp = reading_tmp & ~(mask << lsb); |
| writing_tmp |= ((val & mask) << lsb); |
| |
| |
| for (i = 0; i < len; i++) |
| writing[i] = (writing_tmp >> ((len - 1 - i) * 8)) & 0xff; |
| |
| ret = rtl2832_wr_regs(priv, reg_start_addr, page, &writing[0], len); |
| if (ret) |
| goto err; |
| |
| return ret; |
| |
| err: |
| dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| |
| } |
| |
| static int rtl2832_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) |
| { |
| int ret; |
| struct rtl2832_priv *priv = fe->demodulator_priv; |
| |
| dev_dbg(&priv->i2c->dev, "%s: enable=%d\n", __func__, enable); |
| |
| /* gate already open or close */ |
| if (priv->i2c_gate_state == enable) |
| return 0; |
| |
| ret = rtl2832_wr_demod_reg(priv, DVBT_IIC_REPEAT, (enable ? 0x1 : 0x0)); |
| if (ret) |
| goto err; |
| |
| priv->i2c_gate_state = enable; |
| |
| return ret; |
| err: |
| dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int rtl2832_init(struct dvb_frontend *fe) |
| { |
| struct rtl2832_priv *priv = fe->demodulator_priv; |
| int i, ret, len; |
| u8 en_bbin; |
| u64 pset_iffreq; |
| const struct rtl2832_reg_value *init; |
| |
| /* initialization values for the demodulator registers */ |
| struct rtl2832_reg_value rtl2832_initial_regs[] = { |
| {DVBT_AD_EN_REG, 0x1}, |
| {DVBT_AD_EN_REG1, 0x1}, |
| {DVBT_RSD_BER_FAIL_VAL, 0x2800}, |
| {DVBT_MGD_THD0, 0x10}, |
| {DVBT_MGD_THD1, 0x20}, |
| {DVBT_MGD_THD2, 0x20}, |
| {DVBT_MGD_THD3, 0x40}, |
| {DVBT_MGD_THD4, 0x22}, |
| {DVBT_MGD_THD5, 0x32}, |
| {DVBT_MGD_THD6, 0x37}, |
| {DVBT_MGD_THD7, 0x39}, |
| {DVBT_EN_BK_TRK, 0x0}, |
| {DVBT_EN_CACQ_NOTCH, 0x0}, |
| {DVBT_AD_AV_REF, 0x2a}, |
| {DVBT_REG_PI, 0x6}, |
| {DVBT_PIP_ON, 0x0}, |
| {DVBT_CDIV_PH0, 0x8}, |
| {DVBT_CDIV_PH1, 0x8}, |
| {DVBT_SCALE1_B92, 0x4}, |
| {DVBT_SCALE1_B93, 0xb0}, |
| {DVBT_SCALE1_BA7, 0x78}, |
| {DVBT_SCALE1_BA9, 0x28}, |
| {DVBT_SCALE1_BAA, 0x59}, |
| {DVBT_SCALE1_BAB, 0x83}, |
| {DVBT_SCALE1_BAC, 0xd4}, |
| {DVBT_SCALE1_BB0, 0x65}, |
| {DVBT_SCALE1_BB1, 0x43}, |
| {DVBT_KB_P1, 0x1}, |
| {DVBT_KB_P2, 0x4}, |
| {DVBT_KB_P3, 0x7}, |
| {DVBT_K1_CR_STEP12, 0xa}, |
| {DVBT_REG_GPE, 0x1}, |
| {DVBT_SERIAL, 0x0}, |
| {DVBT_CDIV_PH0, 0x9}, |
| {DVBT_CDIV_PH1, 0x9}, |
| {DVBT_MPEG_IO_OPT_2_2, 0x0}, |
| {DVBT_MPEG_IO_OPT_1_0, 0x0}, |
| {DVBT_TRK_KS_P2, 0x4}, |
| {DVBT_TRK_KS_I2, 0x7}, |
| {DVBT_TR_THD_SET2, 0x6}, |
| {DVBT_TRK_KC_I2, 0x5}, |
| {DVBT_CR_THD_SET2, 0x1}, |
| {DVBT_SPEC_INV, 0x0}, |
| }; |
| |
| dev_dbg(&priv->i2c->dev, "%s:\n", __func__); |
| |
| en_bbin = (priv->cfg.if_dvbt == 0 ? 0x1 : 0x0); |
| |
| /* |
| * PSET_IFFREQ = - floor((IfFreqHz % CrystalFreqHz) * pow(2, 22) |
| * / CrystalFreqHz) |
| */ |
| pset_iffreq = priv->cfg.if_dvbt % priv->cfg.xtal; |
| pset_iffreq *= 0x400000; |
| pset_iffreq = div_u64(pset_iffreq, priv->cfg.xtal); |
| pset_iffreq = pset_iffreq & 0x3fffff; |
| |
| for (i = 0; i < ARRAY_SIZE(rtl2832_initial_regs); i++) { |
| ret = rtl2832_wr_demod_reg(priv, rtl2832_initial_regs[i].reg, |
| rtl2832_initial_regs[i].value); |
| if (ret) |
| goto err; |
| } |
| |
| /* load tuner specific settings */ |
| dev_dbg(&priv->i2c->dev, "%s: load settings for tuner=%02x\n", |
| __func__, priv->cfg.tuner); |
| switch (priv->cfg.tuner) { |
| case RTL2832_TUNER_FC0012: |
| case RTL2832_TUNER_FC0013: |
| len = ARRAY_SIZE(rtl2832_tuner_init_fc0012); |
| init = rtl2832_tuner_init_fc0012; |
| break; |
| case RTL2832_TUNER_TUA9001: |
| len = ARRAY_SIZE(rtl2832_tuner_init_tua9001); |
| init = rtl2832_tuner_init_tua9001; |
| break; |
| case RTL2832_TUNER_E4000: |
| len = ARRAY_SIZE(rtl2832_tuner_init_e4000); |
| init = rtl2832_tuner_init_e4000; |
| break; |
| default: |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| for (i = 0; i < len; i++) { |
| ret = rtl2832_wr_demod_reg(priv, init[i].reg, init[i].value); |
| if (ret) |
| goto err; |
| } |
| |
| /* if frequency settings */ |
| ret = rtl2832_wr_demod_reg(priv, DVBT_EN_BBIN, en_bbin); |
| if (ret) |
| goto err; |
| |
| ret = rtl2832_wr_demod_reg(priv, DVBT_PSET_IFFREQ, pset_iffreq); |
| if (ret) |
| goto err; |
| |
| priv->sleeping = false; |
| |
| return ret; |
| |
| err: |
| dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int rtl2832_sleep(struct dvb_frontend *fe) |
| { |
| struct rtl2832_priv *priv = fe->demodulator_priv; |
| |
| dev_dbg(&priv->i2c->dev, "%s:\n", __func__); |
| priv->sleeping = true; |
| return 0; |
| } |
| |
| int rtl2832_get_tune_settings(struct dvb_frontend *fe, |
| struct dvb_frontend_tune_settings *s) |
| { |
| struct rtl2832_priv *priv = fe->demodulator_priv; |
| |
| dev_dbg(&priv->i2c->dev, "%s:\n", __func__); |
| s->min_delay_ms = 1000; |
| s->step_size = fe->ops.info.frequency_stepsize * 2; |
| s->max_drift = (fe->ops.info.frequency_stepsize * 2) + 1; |
| return 0; |
| } |
| |
| static int rtl2832_set_frontend(struct dvb_frontend *fe) |
| { |
| struct rtl2832_priv *priv = fe->demodulator_priv; |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| int ret, i, j; |
| u64 bw_mode, num, num2; |
| u32 resamp_ratio, cfreq_off_ratio; |
| static u8 bw_params[3][32] = { |
| /* 6 MHz bandwidth */ |
| { |
| 0xf5, 0xff, 0x15, 0x38, 0x5d, 0x6d, 0x52, 0x07, 0xfa, 0x2f, |
| 0x53, 0xf5, 0x3f, 0xca, 0x0b, 0x91, 0xea, 0x30, 0x63, 0xb2, |
| 0x13, 0xda, 0x0b, 0xc4, 0x18, 0x7e, 0x16, 0x66, 0x08, 0x67, |
| 0x19, 0xe0, |
| }, |
| |
| /* 7 MHz bandwidth */ |
| { |
| 0xe7, 0xcc, 0xb5, 0xba, 0xe8, 0x2f, 0x67, 0x61, 0x00, 0xaf, |
| 0x86, 0xf2, 0xbf, 0x59, 0x04, 0x11, 0xb6, 0x33, 0xa4, 0x30, |
| 0x15, 0x10, 0x0a, 0x42, 0x18, 0xf8, 0x17, 0xd9, 0x07, 0x22, |
| 0x19, 0x10, |
| }, |
| |
| /* 8 MHz bandwidth */ |
| { |
| 0x09, 0xf6, 0xd2, 0xa7, 0x9a, 0xc9, 0x27, 0x77, 0x06, 0xbf, |
| 0xec, 0xf4, 0x4f, 0x0b, 0xfc, 0x01, 0x63, 0x35, 0x54, 0xa7, |
| 0x16, 0x66, 0x08, 0xb4, 0x19, 0x6e, 0x19, 0x65, 0x05, 0xc8, |
| 0x19, 0xe0, |
| }, |
| }; |
| |
| |
| dev_dbg(&priv->i2c->dev, "%s: frequency=%d bandwidth_hz=%d " \ |
| "inversion=%d\n", __func__, c->frequency, |
| c->bandwidth_hz, c->inversion); |
| |
| /* program tuner */ |
| if (fe->ops.tuner_ops.set_params) |
| fe->ops.tuner_ops.set_params(fe); |
| |
| switch (c->bandwidth_hz) { |
| case 6000000: |
| i = 0; |
| bw_mode = 48000000; |
| break; |
| case 7000000: |
| i = 1; |
| bw_mode = 56000000; |
| break; |
| case 8000000: |
| i = 2; |
| bw_mode = 64000000; |
| break; |
| default: |
| dev_dbg(&priv->i2c->dev, "%s: invalid bandwidth\n", __func__); |
| return -EINVAL; |
| } |
| |
| for (j = 0; j < sizeof(bw_params[0]); j++) { |
| ret = rtl2832_wr_regs(priv, 0x1c+j, 1, &bw_params[i][j], 1); |
| if (ret) |
| goto err; |
| } |
| |
| /* calculate and set resample ratio |
| * RSAMP_RATIO = floor(CrystalFreqHz * 7 * pow(2, 22) |
| * / ConstWithBandwidthMode) |
| */ |
| num = priv->cfg.xtal * 7; |
| num *= 0x400000; |
| num = div_u64(num, bw_mode); |
| resamp_ratio = num & 0x3ffffff; |
| ret = rtl2832_wr_demod_reg(priv, DVBT_RSAMP_RATIO, resamp_ratio); |
| if (ret) |
| goto err; |
| |
| /* calculate and set cfreq off ratio |
| * CFREQ_OFF_RATIO = - floor(ConstWithBandwidthMode * pow(2, 20) |
| * / (CrystalFreqHz * 7)) |
| */ |
| num = bw_mode << 20; |
| num2 = priv->cfg.xtal * 7; |
| num = div_u64(num, num2); |
| num = -num; |
| cfreq_off_ratio = num & 0xfffff; |
| ret = rtl2832_wr_demod_reg(priv, DVBT_CFREQ_OFF_RATIO, cfreq_off_ratio); |
| if (ret) |
| goto err; |
| |
| |
| /* soft reset */ |
| ret = rtl2832_wr_demod_reg(priv, DVBT_SOFT_RST, 0x1); |
| if (ret) |
| goto err; |
| |
| ret = rtl2832_wr_demod_reg(priv, DVBT_SOFT_RST, 0x0); |
| if (ret) |
| goto err; |
| |
| return ret; |
| err: |
| dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int rtl2832_get_frontend(struct dvb_frontend *fe) |
| { |
| struct rtl2832_priv *priv = fe->demodulator_priv; |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| int ret; |
| u8 buf[3]; |
| |
| if (priv->sleeping) |
| return 0; |
| |
| ret = rtl2832_rd_regs(priv, 0x3c, 3, buf, 2); |
| if (ret) |
| goto err; |
| |
| ret = rtl2832_rd_reg(priv, 0x51, 3, &buf[2]); |
| if (ret) |
| goto err; |
| |
| dev_dbg(&priv->i2c->dev, "%s: TPS=%*ph\n", __func__, 3, buf); |
| |
| switch ((buf[0] >> 2) & 3) { |
| case 0: |
| c->modulation = QPSK; |
| break; |
| case 1: |
| c->modulation = QAM_16; |
| break; |
| case 2: |
| c->modulation = QAM_64; |
| break; |
| } |
| |
| switch ((buf[2] >> 2) & 1) { |
| case 0: |
| c->transmission_mode = TRANSMISSION_MODE_2K; |
| break; |
| case 1: |
| c->transmission_mode = TRANSMISSION_MODE_8K; |
| } |
| |
| switch ((buf[2] >> 0) & 3) { |
| case 0: |
| c->guard_interval = GUARD_INTERVAL_1_32; |
| break; |
| case 1: |
| c->guard_interval = GUARD_INTERVAL_1_16; |
| break; |
| case 2: |
| c->guard_interval = GUARD_INTERVAL_1_8; |
| break; |
| case 3: |
| c->guard_interval = GUARD_INTERVAL_1_4; |
| break; |
| } |
| |
| switch ((buf[0] >> 4) & 7) { |
| case 0: |
| c->hierarchy = HIERARCHY_NONE; |
| break; |
| case 1: |
| c->hierarchy = HIERARCHY_1; |
| break; |
| case 2: |
| c->hierarchy = HIERARCHY_2; |
| break; |
| case 3: |
| c->hierarchy = HIERARCHY_4; |
| break; |
| } |
| |
| switch ((buf[1] >> 3) & 7) { |
| case 0: |
| c->code_rate_HP = FEC_1_2; |
| break; |
| case 1: |
| c->code_rate_HP = FEC_2_3; |
| break; |
| case 2: |
| c->code_rate_HP = FEC_3_4; |
| break; |
| case 3: |
| c->code_rate_HP = FEC_5_6; |
| break; |
| case 4: |
| c->code_rate_HP = FEC_7_8; |
| break; |
| } |
| |
| switch ((buf[1] >> 0) & 7) { |
| case 0: |
| c->code_rate_LP = FEC_1_2; |
| break; |
| case 1: |
| c->code_rate_LP = FEC_2_3; |
| break; |
| case 2: |
| c->code_rate_LP = FEC_3_4; |
| break; |
| case 3: |
| c->code_rate_LP = FEC_5_6; |
| break; |
| case 4: |
| c->code_rate_LP = FEC_7_8; |
| break; |
| } |
| |
| return 0; |
| err: |
| dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int rtl2832_read_status(struct dvb_frontend *fe, fe_status_t *status) |
| { |
| struct rtl2832_priv *priv = fe->demodulator_priv; |
| int ret; |
| u32 tmp; |
| *status = 0; |
| |
| dev_dbg(&priv->i2c->dev, "%s:\n", __func__); |
| if (priv->sleeping) |
| return 0; |
| |
| ret = rtl2832_rd_demod_reg(priv, DVBT_FSM_STAGE, &tmp); |
| if (ret) |
| goto err; |
| |
| if (tmp == 11) { |
| *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | |
| FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; |
| } |
| /* TODO find out if this is also true for rtl2832? */ |
| /*else if (tmp == 10) { |
| *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | |
| FE_HAS_VITERBI; |
| }*/ |
| |
| return ret; |
| err: |
| dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int rtl2832_read_snr(struct dvb_frontend *fe, u16 *snr) |
| { |
| struct rtl2832_priv *priv = fe->demodulator_priv; |
| int ret, hierarchy, constellation; |
| u8 buf[2], tmp; |
| u16 tmp16; |
| #define CONSTELLATION_NUM 3 |
| #define HIERARCHY_NUM 4 |
| static const u32 snr_constant[CONSTELLATION_NUM][HIERARCHY_NUM] = { |
| { 85387325, 85387325, 85387325, 85387325 }, |
| { 86676178, 86676178, 87167949, 87795660 }, |
| { 87659938, 87659938, 87885178, 88241743 }, |
| }; |
| |
| /* reports SNR in resolution of 0.1 dB */ |
| |
| ret = rtl2832_rd_reg(priv, 0x3c, 3, &tmp); |
| if (ret) |
| goto err; |
| |
| constellation = (tmp >> 2) & 0x03; /* [3:2] */ |
| if (constellation > CONSTELLATION_NUM - 1) |
| goto err; |
| |
| hierarchy = (tmp >> 4) & 0x07; /* [6:4] */ |
| if (hierarchy > HIERARCHY_NUM - 1) |
| goto err; |
| |
| ret = rtl2832_rd_regs(priv, 0x0c, 4, buf, 2); |
| if (ret) |
| goto err; |
| |
| tmp16 = buf[0] << 8 | buf[1]; |
| |
| if (tmp16) |
| *snr = (snr_constant[constellation][hierarchy] - |
| intlog10(tmp16)) / ((1 << 24) / 100); |
| else |
| *snr = 0; |
| |
| return 0; |
| err: |
| dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int rtl2832_read_ber(struct dvb_frontend *fe, u32 *ber) |
| { |
| struct rtl2832_priv *priv = fe->demodulator_priv; |
| int ret; |
| u8 buf[2]; |
| |
| ret = rtl2832_rd_regs(priv, 0x4e, 3, buf, 2); |
| if (ret) |
| goto err; |
| |
| *ber = buf[0] << 8 | buf[1]; |
| |
| return 0; |
| err: |
| dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static struct dvb_frontend_ops rtl2832_ops; |
| |
| static void rtl2832_release(struct dvb_frontend *fe) |
| { |
| struct rtl2832_priv *priv = fe->demodulator_priv; |
| |
| dev_dbg(&priv->i2c->dev, "%s:\n", __func__); |
| kfree(priv); |
| } |
| |
| struct dvb_frontend *rtl2832_attach(const struct rtl2832_config *cfg, |
| struct i2c_adapter *i2c) |
| { |
| struct rtl2832_priv *priv = NULL; |
| int ret = 0; |
| u8 tmp; |
| |
| dev_dbg(&i2c->dev, "%s:\n", __func__); |
| |
| /* allocate memory for the internal state */ |
| priv = kzalloc(sizeof(struct rtl2832_priv), GFP_KERNEL); |
| if (priv == NULL) |
| goto err; |
| |
| /* setup the priv */ |
| priv->i2c = i2c; |
| priv->tuner = cfg->tuner; |
| memcpy(&priv->cfg, cfg, sizeof(struct rtl2832_config)); |
| |
| /* check if the demod is there */ |
| ret = rtl2832_rd_reg(priv, 0x00, 0x0, &tmp); |
| if (ret) |
| goto err; |
| |
| /* create dvb_frontend */ |
| memcpy(&priv->fe.ops, &rtl2832_ops, sizeof(struct dvb_frontend_ops)); |
| priv->fe.demodulator_priv = priv; |
| |
| /* TODO implement sleep mode */ |
| priv->sleeping = true; |
| |
| return &priv->fe; |
| err: |
| dev_dbg(&i2c->dev, "%s: failed=%d\n", __func__, ret); |
| kfree(priv); |
| return NULL; |
| } |
| EXPORT_SYMBOL(rtl2832_attach); |
| |
| static struct dvb_frontend_ops rtl2832_ops = { |
| .delsys = { SYS_DVBT }, |
| .info = { |
| .name = "Realtek RTL2832 (DVB-T)", |
| .frequency_min = 174000000, |
| .frequency_max = 862000000, |
| .frequency_stepsize = 166667, |
| .caps = FE_CAN_FEC_1_2 | |
| FE_CAN_FEC_2_3 | |
| FE_CAN_FEC_3_4 | |
| FE_CAN_FEC_5_6 | |
| FE_CAN_FEC_7_8 | |
| FE_CAN_FEC_AUTO | |
| FE_CAN_QPSK | |
| FE_CAN_QAM_16 | |
| FE_CAN_QAM_64 | |
| FE_CAN_QAM_AUTO | |
| FE_CAN_TRANSMISSION_MODE_AUTO | |
| FE_CAN_GUARD_INTERVAL_AUTO | |
| FE_CAN_HIERARCHY_AUTO | |
| FE_CAN_RECOVER | |
| FE_CAN_MUTE_TS |
| }, |
| |
| .release = rtl2832_release, |
| |
| .init = rtl2832_init, |
| .sleep = rtl2832_sleep, |
| |
| .get_tune_settings = rtl2832_get_tune_settings, |
| |
| .set_frontend = rtl2832_set_frontend, |
| .get_frontend = rtl2832_get_frontend, |
| |
| .read_status = rtl2832_read_status, |
| .read_snr = rtl2832_read_snr, |
| .read_ber = rtl2832_read_ber, |
| |
| .i2c_gate_ctrl = rtl2832_i2c_gate_ctrl, |
| }; |
| |
| MODULE_AUTHOR("Thomas Mair <mair.thomas86@gmail.com>"); |
| MODULE_DESCRIPTION("Realtek RTL2832 DVB-T demodulator driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION("0.5"); |