sky2: use pci_config access functions
Use the PCI layer config access functions. The driver was using the
memory mapped window in device, to workaround issues accessing the
advanced error reporting registers.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index b81d817..941a608 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -223,21 +223,22 @@
sky2_write8(hw, B2_Y2_CLK_GATE, 0);
if (hw->flags & SKY2_HW_ADV_POWER_CTL) {
+ struct pci_dev *pdev = hw->pdev;
u32 reg;
- sky2_pci_write32(hw, PCI_DEV_REG3, 0);
+ pci_write_config_dword(pdev, PCI_DEV_REG3, 0);
- reg = sky2_pci_read32(hw, PCI_DEV_REG4);
+ pci_read_config_dword(pdev, PCI_DEV_REG4, ®);
/* set all bits to 0 except bits 15..12 and 8 */
reg &= P_ASPM_CONTROL_MSK;
- sky2_pci_write32(hw, PCI_DEV_REG4, reg);
+ pci_write_config_dword(pdev, PCI_DEV_REG4, reg);
- reg = sky2_pci_read32(hw, PCI_DEV_REG5);
+ pci_read_config_dword(pdev, PCI_DEV_REG5, ®);
/* set all bits to 0 except bits 28 & 27 */
reg &= P_CTL_TIM_VMAIN_AV_MSK;
- sky2_pci_write32(hw, PCI_DEV_REG5, reg);
+ pci_write_config_dword(pdev, PCI_DEV_REG5, reg);
- sky2_pci_write32(hw, PCI_CFG_REG_1, 0);
+ pci_write_config_dword(pdev, PCI_CFG_REG_1, 0);
/* Enable workaround for dev 4.107 on Yukon-Ultra & Extreme */
reg = sky2_read32(hw, B2_GP_IO);
@@ -603,6 +604,7 @@
static void sky2_phy_power(struct sky2_hw *hw, unsigned port, int onoff)
{
+ struct pci_dev *pdev = hw->pdev;
u32 reg1;
static const u32 phy_power[]
= { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
@@ -611,15 +613,16 @@
if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
onoff = !onoff;
- reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
+ pci_read_config_dword(pdev, PCI_DEV_REG1, ®1);
if (onoff)
/* Turn off phy power saving */
reg1 &= ~phy_power[port];
else
reg1 |= phy_power[port];
- sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
- sky2_pci_read32(hw, PCI_DEV_REG1);
+ pci_write_config_dword(pdev, PCI_DEV_REG1, reg1);
+ pci_read_config_dword(pdev, PCI_DEV_REG1, ®1);
+
udelay(100);
}
@@ -687,9 +690,9 @@
sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), ctrl);
/* Turn on legacy PCI-Express PME mode */
- reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
+ pci_read_config_dword(hw->pdev, PCI_DEV_REG1, ®1);
reg1 |= PCI_Y2_PME_LEGACY;
- sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+ pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg1);
/* block receiver */
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
@@ -1306,9 +1309,9 @@
struct sky2_port *osky2 = netdev_priv(otherdev);
u16 cmd;
- cmd = sky2_pci_read16(hw, cap + PCI_X_CMD);
+ pci_read_config_word(hw->pdev, cap + PCI_X_CMD, &cmd);
cmd &= ~PCI_X_CMD_MAX_SPLIT;
- sky2_pci_write16(hw, cap + PCI_X_CMD, cmd);
+ pci_write_config_word(hw->pdev, cap + PCI_X_CMD, cmd);
sky2->rx_csum = 0;
osky2->rx_csum = 0;
@@ -2434,13 +2437,13 @@
if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
u16 pci_err;
- pci_err = sky2_pci_read16(hw, PCI_STATUS);
+ pci_read_config_word(pdev, PCI_STATUS, &pci_err);
if (net_ratelimit())
dev_err(&pdev->dev, "PCI hardware error (0x%x)\n",
pci_err);
- sky2_pci_write16(hw, PCI_STATUS,
- pci_err | PCI_STATUS_ERROR_BITS);
+ pci_write_config_word(pdev, PCI_STATUS,
+ pci_err | PCI_STATUS_ERROR_BITS);
}
if (status & Y2_IS_PCI_EXP) {
@@ -2694,10 +2697,13 @@
static int __devinit sky2_init(struct sky2_hw *hw)
{
+ int rc;
u8 t8;
- /* Enable all clocks */
- sky2_pci_write32(hw, PCI_DEV_REG3, 0);
+ /* Enable all clocks and check for bad PCI access */
+ rc = pci_write_config_dword(hw->pdev, PCI_DEV_REG3, 0);
+ if (rc)
+ return rc;
sky2_write8(hw, B0_CTST, CS_RST_CLR);
@@ -2791,10 +2797,9 @@
sky2_write8(hw, B0_CTST, CS_RST_CLR);
/* clear PCI errors, if any */
- status = sky2_pci_read16(hw, PCI_STATUS);
-
- sky2_pci_write16(hw, PCI_STATUS, status | PCI_STATUS_ERROR_BITS);
-
+ pci_read_config_word(pdev, PCI_STATUS, &status);
+ status |= PCI_STATUS_ERROR_BITS;
+ pci_write_config_word(pdev, PCI_STATUS, status);
sky2_write8(hw, B0_CTST, CS_MRST_CLR);
@@ -3606,26 +3611,31 @@
struct sky2_port *sky2 = netdev_priv(dev);
u16 reg2;
- reg2 = sky2_pci_read32(sky2->hw, PCI_DEV_REG2);
+ pci_read_config_word(sky2->hw->pdev, PCI_DEV_REG2, ®2);
return 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8);
}
-static u32 sky2_vpd_read(struct sky2_hw *hw, int cap, u16 offset)
+static u32 sky2_vpd_read(struct pci_dev *pdev, int cap, u16 offset)
{
- sky2_pci_write16(hw, cap + PCI_VPD_ADDR, offset);
+ u32 val;
- while (!(sky2_pci_read16(hw, cap + PCI_VPD_ADDR) & PCI_VPD_ADDR_F))
- cpu_relax();
- return sky2_pci_read32(hw, cap + PCI_VPD_DATA);
+ pci_write_config_word(pdev, cap + PCI_VPD_ADDR, offset);
+
+ do {
+ pci_read_config_word(pdev, cap + PCI_VPD_ADDR, &offset);
+ } while (!(offset & PCI_VPD_ADDR_F));
+
+ pci_read_config_dword(pdev, cap + PCI_VPD_DATA, &val);
+ return val;
}
-static void sky2_vpd_write(struct sky2_hw *hw, int cap, u16 offset, u32 val)
+static void sky2_vpd_write(struct pci_dev *pdev, int cap, u16 offset, u32 val)
{
- sky2_pci_write32(hw, cap + PCI_VPD_DATA, val);
- sky2_pci_write16(hw, cap + PCI_VPD_ADDR, offset | PCI_VPD_ADDR_F);
+ pci_write_config_word(pdev, cap + PCI_VPD_DATA, val);
+ pci_write_config_dword(pdev, cap + PCI_VPD_ADDR, offset | PCI_VPD_ADDR_F);
do {
- cpu_relax();
- } while (sky2_pci_read16(hw, cap + PCI_VPD_ADDR) & PCI_VPD_ADDR_F);
+ pci_read_config_word(pdev, cap + PCI_VPD_ADDR, &offset);
+ } while (offset & PCI_VPD_ADDR_F);
}
static int sky2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
@@ -3642,7 +3652,7 @@
eeprom->magic = SKY2_EEPROM_MAGIC;
while (length > 0) {
- u32 val = sky2_vpd_read(sky2->hw, cap, offset);
+ u32 val = sky2_vpd_read(sky2->hw->pdev, cap, offset);
int n = min_t(int, length, sizeof(val));
memcpy(data, &val, n);
@@ -3672,10 +3682,10 @@
int n = min_t(int, length, sizeof(val));
if (n < sizeof(val))
- val = sky2_vpd_read(sky2->hw, cap, offset);
+ val = sky2_vpd_read(sky2->hw->pdev, cap, offset);
memcpy(&val, data, n);
- sky2_vpd_write(sky2->hw, cap, offset, val);
+ sky2_vpd_write(sky2->hw->pdev, cap, offset, val);
length -= n;
data += n;
@@ -4116,15 +4126,14 @@
*/
{
u32 reg;
- reg = sky2_pci_read32(hw, PCI_DEV_REG2);
+ pci_read_config_dword(pdev,PCI_DEV_REG2, ®);
reg &= ~PCI_REV_DESC;
- sky2_pci_write32(hw, PCI_DEV_REG2, reg);
+ pci_write_config_dword(pdev, PCI_DEV_REG2, reg);
}
#endif
/* ring for status responses */
- hw->st_le = pci_alloc_consistent(hw->pdev, STATUS_LE_BYTES,
- &hw->st_dma);
+ hw->st_le = pci_alloc_consistent(pdev, STATUS_LE_BYTES, &hw->st_dma);
if (!hw->st_le)
goto err_out_iounmap;
@@ -4201,7 +4210,7 @@
free_netdev(dev);
err_out_free_pci:
sky2_write8(hw, B0_CTST, CS_RST_SET);
- pci_free_consistent(hw->pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
+ pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
err_out_iounmap:
iounmap(hw->regs);
err_out_free_hw:
@@ -4312,7 +4321,7 @@
if (hw->chip_id == CHIP_ID_YUKON_EX ||
hw->chip_id == CHIP_ID_YUKON_EC_U ||
hw->chip_id == CHIP_ID_YUKON_FE_P)
- sky2_pci_write32(hw, PCI_DEV_REG3, 0);
+ pci_write_config_dword(pdev, PCI_DEV_REG3, 0);
sky2_reset(hw);
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 6f5e162..f4a3c2f 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -2129,25 +2129,4 @@
gma_write16(hw, port, reg+4,(u16) addr[2] | ((u16) addr[3] << 8));
gma_write16(hw, port, reg+8,(u16) addr[4] | ((u16) addr[5] << 8));
}
-
-/* PCI config space access */
-static inline u32 sky2_pci_read32(const struct sky2_hw *hw, unsigned reg)
-{
- return sky2_read32(hw, Y2_CFG_SPC + reg);
-}
-
-static inline u16 sky2_pci_read16(const struct sky2_hw *hw, unsigned reg)
-{
- return sky2_read16(hw, Y2_CFG_SPC + reg);
-}
-
-static inline void sky2_pci_write32(struct sky2_hw *hw, unsigned reg, u32 val)
-{
- sky2_write32(hw, Y2_CFG_SPC + reg, val);
-}
-
-static inline void sky2_pci_write16(struct sky2_hw *hw, unsigned reg, u16 val)
-{
- sky2_write16(hw, Y2_CFG_SPC + reg, val);
-}
#endif