arch/arm/boot/dts/vexpress-v2m.dtsi

/*
 * ARM Ltd. Versatile Express
 *
 * Motherboard Express uATX
 * V2M-P1
 *
 * HBI-0190D
 *
 * Original memory map ("Legacy memory map" in the board's
 * Technical Reference Manual)
 *
 * WARNING! The hardware described in this file is independent from the
 * RS1 variant (vexpress-v2m-rs1.dtsi), but there is a strong
 * correspondence between the two configurations.
 *
 * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
 * CHANGES TO vexpress-v2m-rs1.dtsi!
 */

/ {
	aliases {
		arm,v2m_timer = &v2m_timer01;
	};

	motherboard {
		compatible = "simple-bus";
		#address-cells = <2>; /* SMB chipselect number and offset */
		#size-cells = <1>;
		#interrupt-cells = <1>;

		flash@0,00000000 {
			compatible = "arm,vexpress-flash", "cfi-flash";
			reg = <0 0x00000000 0x04000000>,
			      <1 0x00000000 0x04000000>;
			bank-width = <4>;
		};

		psram@2,00000000 {
			compatible = "arm,vexpress-psram", "mtd-ram";
			reg = <2 0x00000000 0x02000000>;
			bank-width = <4>;
		};

		vram@3,00000000 {
			compatible = "arm,vexpress-vram";
			reg = <3 0x00000000 0x00800000>;
		};

		ethernet@3,02000000 {
			compatible = "smsc,lan9118", "smsc,lan9115";
			reg = <3 0x02000000 0x10000>;
			interrupts = <15>;
			phy-mode = "mii";
			reg-io-width = <4>;
			smsc,irq-active-high;
			smsc,irq-push-pull;
			vdd33a-supply = <&v2m_fixed_3v3>;
			vddvario-supply = <&v2m_fixed_3v3>;
		};

		usb@3,03000000 {
			compatible = "nxp,usb-isp1761";
			reg = <3 0x03000000 0x20000>;
			interrupts = <16>;
			port1-otg;
		};

		iofpga@7,00000000 {
			compatible = "arm,amba-bus", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0 7 0 0x20000>;

			sysreg@00000 {
				compatible = "arm,vexpress-sysreg";
				reg = <0x00000 0x1000>;
			};

			sysctl@01000 {
				compatible = "arm,sp810", "arm,primecell";
				reg = <0x01000 0x1000>;
			};

			/* PCI-E I2C bus */
			v2m_i2c_pcie: i2c@02000 {
				compatible = "arm,versatile-i2c";
				reg = <0x02000 0x1000>;

				#address-cells = <1>;
				#size-cells = <0>;

				pcie-switch@60 {
					compatible = "idt,89hpes32h8";
					reg = <0x60>;
				};
			};

			aaci@04000 {
				compatible = "arm,pl041", "arm,primecell";
				reg = <0x04000 0x1000>;
				interrupts = <11>;
			};

			mmci@05000 {
				compatible = "arm,pl180", "arm,primecell";
				reg = <0x05000 0x1000>;
				interrupts = <9 10>;
			};

			kmi@06000 {
				compatible = "arm,pl050", "arm,primecell";
				reg = <0x06000 0x1000>;
				interrupts = <12>;
			};

			kmi@07000 {
				compatible = "arm,pl050", "arm,primecell";
				reg = <0x07000 0x1000>;
				interrupts = <13>;
			};

			v2m_serial0: uart@09000 {
				compatible = "arm,pl011", "arm,primecell";
				reg = <0x09000 0x1000>;
				interrupts = <5>;
			};

			v2m_serial1: uart@0a000 {
				compatible = "arm,pl011", "arm,primecell";
				reg = <0x0a000 0x1000>;
				interrupts = <6>;
			};

			v2m_serial2: uart@0b000 {
				compatible = "arm,pl011", "arm,primecell";
				reg = <0x0b000 0x1000>;
				interrupts = <7>;
			};

			v2m_serial3: uart@0c000 {
				compatible = "arm,pl011", "arm,primecell";
				reg = <0x0c000 0x1000>;
				interrupts = <8>;
			};

			wdt@0f000 {
				compatible = "arm,sp805", "arm,primecell";
				reg = <0x0f000 0x1000>;
				interrupts = <0>;
			};

			v2m_timer01: timer@11000 {
				compatible = "arm,sp804", "arm,primecell";
				reg = <0x11000 0x1000>;
				interrupts = <2>;
			};

			v2m_timer23: timer@12000 {
				compatible = "arm,sp804", "arm,primecell";
				reg = <0x12000 0x1000>;
				interrupts = <3>;
			};

			/* DVI I2C bus */
			v2m_i2c_dvi: i2c@16000 {
				compatible = "arm,versatile-i2c";
				reg = <0x16000 0x1000>;

				#address-cells = <1>;
				#size-cells = <0>;

				dvi-transmitter@39 {
					compatible = "sil,sii9022-tpi", "sil,sii9022";
					reg = <0x39>;
				};

				dvi-transmitter@60 {
					compatible = "sil,sii9022-cpi", "sil,sii9022";
					reg = <0x60>;
				};
			};

			rtc@17000 {
				compatible = "arm,pl031", "arm,primecell";
				reg = <0x17000 0x1000>;
				interrupts = <4>;
			};

			compact-flash@1a000 {
				compatible = "arm,vexpress-cf", "ata-generic";
				reg = <0x1a000 0x100
				       0x1a100 0xf00>;
				reg-shift = <2>;
			};

			clcd@1f000 {
				compatible = "arm,pl111", "arm,primecell";
				reg = <0x1f000 0x1000>;
				interrupts = <14>;
			};
		};

		v2m_fixed_3v3: fixedregulator@0 {
			compatible = "regulator-fixed";
			regulator-name = "3V3";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-always-on;
		};
	};
};