drivers/net/phy/at803x.c - kernel/msm-4.19 - Gitiles

 /*
  * drivers/net/phy/at803x.c
  *
  * Driver for Atheros 803x PHY
  *
  * Author: Matus Ujhelyi <ujhelyi.m@gmail.com>
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */

 #include <linux/phy.h>
 #include <linux/module.h>
 #include <linux/string.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/of_gpio.h>
 #include <linux/gpio/consumer.h>

 #define AT803X_INTR_ENABLE			0x12
 #define AT803X_INTR_ENABLE_AUTONEG_ERR		BIT(15)
 #define AT803X_INTR_ENABLE_SPEED_CHANGED	BIT(14)
 #define AT803X_INTR_ENABLE_DUPLEX_CHANGED	BIT(13)
 #define AT803X_INTR_ENABLE_PAGE_RECEIVED	BIT(12)
 #define AT803X_INTR_ENABLE_LINK_FAIL		BIT(11)
 #define AT803X_INTR_ENABLE_LINK_SUCCESS		BIT(10)
 #define AT803X_INTR_ENABLE_WIRESPEED_DOWNGRADE	BIT(5)
 #define AT803X_INTR_ENABLE_POLARITY_CHANGED	BIT(1)
 #define AT803X_INTR_ENABLE_WOL			BIT(0)

 #define AT803X_INTR_STATUS			0x13

 #define AT803X_SMART_SPEED			0x14
 #define AT803X_LED_CONTROL			0x18

 #define AT803X_DEVICE_ADDR			0x03
 #define AT803X_LOC_MAC_ADDR_0_15_OFFSET		0x804C
 #define AT803X_LOC_MAC_ADDR_16_31_OFFSET	0x804B
 #define AT803X_LOC_MAC_ADDR_32_47_OFFSET	0x804A
 #define AT803X_MMD_ACCESS_CONTROL		0x0D
 #define AT803X_MMD_ACCESS_CONTROL_DATA		0x0E
 #define AT803X_FUNC_DATA			0x4003

 #define AT803X_DEBUG_ADDR			0x1D
 #define AT803X_DEBUG_DATA			0x1E

 #define AT803X_DEBUG_REG_0			0x00
 #define AT803X_DEBUG_RX_CLK_DLY_EN		BIT(15)

 #define AT803X_DEBUG_REG_5			0x05
 #define AT803X_DEBUG_TX_CLK_DLY_EN		BIT(8)

 #define AT803X_REG_CHIP_CONFIG			0x1f
 #define AT803X_BT_BX_REG_SEL			0x8000

 #define ATH8030_PHY_ID 0x004dd076
 #define ATH8031_PHY_ID 0x004dd074
 #define ATH8035_PHY_ID 0x004dd072

 MODULE_DESCRIPTION("Atheros 803x PHY driver");
 MODULE_AUTHOR("Matus Ujhelyi");
 MODULE_LICENSE("GPL");

 struct at803x_priv {
 	bool phy_reset:1;
 	struct gpio_desc *gpiod_reset;
 };

 struct at803x_context {
 	u16 bmcr;
 	u16 advertise;
 	u16 control1000;
 	u16 int_enable;
 	u16 smart_speed;
 	u16 led_control;
 };

 static int at803x_debug_reg_read(struct phy_device *phydev, u16 reg)
 {
 	int ret;

 	ret = phy_write(phydev, AT803X_DEBUG_ADDR, reg);
 	if (ret < 0)
 		return ret;

 	return phy_read(phydev, AT803X_DEBUG_DATA);
 }

 static int at803x_debug_reg_mask(struct phy_device *phydev, u16 reg,
 				 u16 clear, u16 set)
 {
 	u16 val;
 	int ret;

 	ret = at803x_debug_reg_read(phydev, reg);
 	if (ret < 0)
 		return ret;

 	val = ret & 0xffff;
 	val &= ~clear;
 	val |= set;

 	return phy_write(phydev, AT803X_DEBUG_DATA, val);
 }

 static inline int at803x_enable_rx_delay(struct phy_device *phydev)
 {
 	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, 0,
 					AT803X_DEBUG_RX_CLK_DLY_EN);
 }

 static inline int at803x_enable_tx_delay(struct phy_device *phydev)
 {
 	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0,
 					AT803X_DEBUG_TX_CLK_DLY_EN);
 }

 /* save relevant PHY registers to private copy */
 static void at803x_context_save(struct phy_device *phydev,
 				struct at803x_context *context)
 {
 	context->bmcr = phy_read(phydev, MII_BMCR);
 	context->advertise = phy_read(phydev, MII_ADVERTISE);
 	context->control1000 = phy_read(phydev, MII_CTRL1000);
 	context->int_enable = phy_read(phydev, AT803X_INTR_ENABLE);
 	context->smart_speed = phy_read(phydev, AT803X_SMART_SPEED);
 	context->led_control = phy_read(phydev, AT803X_LED_CONTROL);
 }

 /* restore relevant PHY registers from private copy */
 static void at803x_context_restore(struct phy_device *phydev,
 				   const struct at803x_context *context)
 {
 	phy_write(phydev, MII_BMCR, context->bmcr);
 	phy_write(phydev, MII_ADVERTISE, context->advertise);
 	phy_write(phydev, MII_CTRL1000, context->control1000);
 	phy_write(phydev, AT803X_INTR_ENABLE, context->int_enable);
 	phy_write(phydev, AT803X_SMART_SPEED, context->smart_speed);
 	phy_write(phydev, AT803X_LED_CONTROL, context->led_control);
 }

 static int at803x_set_wol(struct phy_device *phydev,
 			  struct ethtool_wolinfo *wol)
 {
 	struct net_device *ndev = phydev->attached_dev;
 	const u8 *mac;
 	int ret;
 	u32 value;
 	unsigned int i, offsets[] = {
 		AT803X_LOC_MAC_ADDR_32_47_OFFSET,
 		AT803X_LOC_MAC_ADDR_16_31_OFFSET,
 		AT803X_LOC_MAC_ADDR_0_15_OFFSET,
 	};

 	if (!ndev)
 		return -ENODEV;

 	if (wol->wolopts & WAKE_MAGIC) {
 		mac = (const u8 *) ndev->dev_addr;

 		if (!is_valid_ether_addr(mac))
 			return -EFAULT;

 		for (i = 0; i < 3; i++) {
 			phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
 				  AT803X_DEVICE_ADDR);
 			phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
 				  offsets[i]);
 			phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
 				  AT803X_FUNC_DATA);
 			phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
 				  mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
 		}

 		value = phy_read(phydev, AT803X_INTR_ENABLE);
 		value |= AT803X_INTR_ENABLE_WOL;
 		ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
 		if (ret)
 			return ret;
 		value = phy_read(phydev, AT803X_INTR_STATUS);
 	} else {
 		value = phy_read(phydev, AT803X_INTR_ENABLE);
 		value &= (~AT803X_INTR_ENABLE_WOL);
 		ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
 		if (ret)
 			return ret;
 		value = phy_read(phydev, AT803X_INTR_STATUS);
 	}

 	return ret;
 }

 static void at803x_get_wol(struct phy_device *phydev,
 			   struct ethtool_wolinfo *wol)
 {
 	u32 value;

 	wol->supported = WAKE_MAGIC;
 	wol->wolopts = 0;

 	value = phy_read(phydev, AT803X_INTR_ENABLE);
 	if (value & AT803X_INTR_ENABLE_WOL)
 		wol->wolopts |= WAKE_MAGIC;
 }

 static int at803x_suspend(struct phy_device *phydev)
 {
 	int value;
 	int wol_enabled;
 	int ccr;

 	mutex_lock(&phydev->lock);

 	value = phy_read(phydev, AT803X_INTR_ENABLE);
 	wol_enabled = value & AT803X_INTR_ENABLE_WOL;

 	value = phy_read(phydev, MII_BMCR);

 	if (wol_enabled)
 		value |= BMCR_ISOLATE;
 	else
 		value |= BMCR_PDOWN;

 	phy_write(phydev, MII_BMCR, value);

 	if (phydev->interface != PHY_INTERFACE_MODE_SGMII)
 		goto done;

 	/* also power-down SGMII interface */
 	ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
 	phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr & ~AT803X_BT_BX_REG_SEL);
 	phy_write(phydev, MII_BMCR, phy_read(phydev, MII_BMCR) | BMCR_PDOWN);
 	phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL);

 done:
 	mutex_unlock(&phydev->lock);

 	return 0;
 }

 static int at803x_resume(struct phy_device *phydev)
 {
 	int value;
 	int ccr;

 	mutex_lock(&phydev->lock);

 	value = phy_read(phydev, MII_BMCR);
 	value &= ~(BMCR_PDOWN | BMCR_ISOLATE);
 	phy_write(phydev, MII_BMCR, value);

 	if (phydev->interface != PHY_INTERFACE_MODE_SGMII)
 		goto done;

 	/* also power-up SGMII interface */
 	ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
 	phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr & ~AT803X_BT_BX_REG_SEL);
 	value = phy_read(phydev, MII_BMCR) & ~(BMCR_PDOWN | BMCR_ISOLATE);
 	phy_write(phydev, MII_BMCR, value);
 	phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL);

 done:
 	mutex_unlock(&phydev->lock);

 	return 0;
 }

 static int at803x_probe(struct phy_device *phydev)
 {
 	struct device *dev = &phydev->mdio.dev;
 	struct at803x_priv *priv;
 	struct gpio_desc *gpiod_reset;

 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;

 	gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(gpiod_reset))
 		return PTR_ERR(gpiod_reset);

 	priv->gpiod_reset = gpiod_reset;

 	phydev->priv = priv;

 	return 0;
 }

 static int at803x_config_init(struct phy_device *phydev)
 {
 	int ret;

 	ret = genphy_config_init(phydev);
 	if (ret < 0)
 		return ret;

 	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID ||
 			phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
 		ret = at803x_enable_rx_delay(phydev);
 		if (ret < 0)
 			return ret;
 	}

 	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID ||
 			phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
 		ret = at803x_enable_tx_delay(phydev);
 		if (ret < 0)
 			return ret;
 	}

 	return 0;
 }

 static int at803x_ack_interrupt(struct phy_device *phydev)
 {
 	int err;

 	err = phy_read(phydev, AT803X_INTR_STATUS);

 	return (err < 0) ? err : 0;
 }

 static int at803x_config_intr(struct phy_device *phydev)
 {
 	int err;
 	int value;

 	value = phy_read(phydev, AT803X_INTR_ENABLE);

 	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
 		value |= AT803X_INTR_ENABLE_AUTONEG_ERR;
 		value |= AT803X_INTR_ENABLE_SPEED_CHANGED;
 		value |= AT803X_INTR_ENABLE_DUPLEX_CHANGED;
 		value |= AT803X_INTR_ENABLE_LINK_FAIL;
 		value |= AT803X_INTR_ENABLE_LINK_SUCCESS;

 		err = phy_write(phydev, AT803X_INTR_ENABLE, value);
 	}
 	else
 		err = phy_write(phydev, AT803X_INTR_ENABLE, 0);

 	return err;
 }

 static void at803x_link_change_notify(struct phy_device *phydev)
 {
 	struct at803x_priv *priv = phydev->priv;

 	/*
 	 * Conduct a hardware reset for AT8030 every time a link loss is
 	 * signalled. This is necessary to circumvent a hardware bug that
 	 * occurs when the cable is unplugged while TX packets are pending
 	 * in the FIFO. In such cases, the FIFO enters an error mode it
 	 * cannot recover from by software.
 	 */
 	if (phydev->drv->phy_id == ATH8030_PHY_ID) {
 		if (phydev->state == PHY_NOLINK) {
 			if (priv->gpiod_reset && !priv->phy_reset) {
 				struct at803x_context context;

 				at803x_context_save(phydev, &context);

 				gpiod_set_value(priv->gpiod_reset, 0);
 				msleep(1);
 				gpiod_set_value(priv->gpiod_reset, 1);
 				msleep(1);

 				at803x_context_restore(phydev, &context);

 				phydev_dbg(phydev, "%s(): phy was reset\n",
 					   __func__);
 				priv->phy_reset = true;
 			}
 		} else {
 			priv->phy_reset = false;
 		}
 	}
 }

 static struct phy_driver at803x_driver[] = {
 {
 	/* ATHEROS 8035 */
 	.phy_id			= ATH8035_PHY_ID,
 	.name			= "Atheros 8035 ethernet",
 	.phy_id_mask		= 0xffffffef,
 	.probe			= at803x_probe,
 	.config_init		= at803x_config_init,
 	.link_change_notify	= at803x_link_change_notify,
 	.set_wol		= at803x_set_wol,
 	.get_wol		= at803x_get_wol,
 	.suspend		= at803x_suspend,
 	.resume			= at803x_resume,
 	.features		= PHY_GBIT_FEATURES,
 	.flags			= PHY_HAS_INTERRUPT,
 	.config_aneg		= genphy_config_aneg,
 	.read_status		= genphy_read_status,
 	.ack_interrupt		= at803x_ack_interrupt,
 	.config_intr		= at803x_config_intr,
 }, {
 	/* ATHEROS 8030 */
 	.phy_id			= ATH8030_PHY_ID,
 	.name			= "Atheros 8030 ethernet",
 	.phy_id_mask		= 0xffffffef,
 	.probe			= at803x_probe,
 	.config_init		= at803x_config_init,
 	.link_change_notify	= at803x_link_change_notify,
 	.set_wol		= at803x_set_wol,
 	.get_wol		= at803x_get_wol,
 	.suspend		= at803x_suspend,
 	.resume			= at803x_resume,
 	.features		= PHY_BASIC_FEATURES,
 	.flags			= PHY_HAS_INTERRUPT,
 	.config_aneg		= genphy_config_aneg,
 	.read_status		= genphy_read_status,
 	.ack_interrupt		= at803x_ack_interrupt,
 	.config_intr		= at803x_config_intr,
 }, {
 	/* ATHEROS 8031 */
 	.phy_id			= ATH8031_PHY_ID,
 	.name			= "Atheros 8031 ethernet",
 	.phy_id_mask		= 0xffffffef,
 	.probe			= at803x_probe,
 	.config_init		= at803x_config_init,
 	.link_change_notify	= at803x_link_change_notify,
 	.set_wol		= at803x_set_wol,
 	.get_wol		= at803x_get_wol,
 	.suspend		= at803x_suspend,
 	.resume			= at803x_resume,
 	.features		= PHY_GBIT_FEATURES,
 	.flags			= PHY_HAS_INTERRUPT,
 	.config_aneg		= genphy_config_aneg,
 	.read_status		= genphy_read_status,
 	.ack_interrupt		= &at803x_ack_interrupt,
 	.config_intr		= &at803x_config_intr,
 } };

 module_phy_driver(at803x_driver);

 static struct mdio_device_id __maybe_unused atheros_tbl[] = {
 	{ ATH8030_PHY_ID, 0xffffffef },
 	{ ATH8031_PHY_ID, 0xffffffef },
 	{ ATH8035_PHY_ID, 0xffffffef },
 	{ }
 };

 MODULE_DEVICE_TABLE(mdio, atheros_tbl);
	/*
	* drivers/net/phy/at803x.c
	*
	* Driver for Atheros 803x PHY
	*
	* Author: Matus Ujhelyi <ujhelyi.m@gmail.com>
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License as published by the
	* Free Software Foundation; either version 2 of the License, or (at your
	* option) any later version.
	*/

	#include <linux/phy.h>
	#include <linux/module.h>
	#include <linux/string.h>
	#include <linux/netdevice.h>
	#include <linux/etherdevice.h>
	#include <linux/of_gpio.h>
	#include <linux/gpio/consumer.h>

	#define AT803X_INTR_ENABLE 0x12
	#define AT803X_INTR_ENABLE_AUTONEG_ERR BIT(15)
	#define AT803X_INTR_ENABLE_SPEED_CHANGED BIT(14)
	#define AT803X_INTR_ENABLE_DUPLEX_CHANGED BIT(13)
	#define AT803X_INTR_ENABLE_PAGE_RECEIVED BIT(12)
	#define AT803X_INTR_ENABLE_LINK_FAIL BIT(11)
	#define AT803X_INTR_ENABLE_LINK_SUCCESS BIT(10)
	#define AT803X_INTR_ENABLE_WIRESPEED_DOWNGRADE BIT(5)
	#define AT803X_INTR_ENABLE_POLARITY_CHANGED BIT(1)
	#define AT803X_INTR_ENABLE_WOL BIT(0)

	#define AT803X_INTR_STATUS 0x13

	#define AT803X_SMART_SPEED 0x14
	#define AT803X_LED_CONTROL 0x18

	#define AT803X_DEVICE_ADDR 0x03
	#define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C
	#define AT803X_LOC_MAC_ADDR_16_31_OFFSET 0x804B
	#define AT803X_LOC_MAC_ADDR_32_47_OFFSET 0x804A
	#define AT803X_MMD_ACCESS_CONTROL 0x0D
	#define AT803X_MMD_ACCESS_CONTROL_DATA 0x0E
	#define AT803X_FUNC_DATA 0x4003

	#define AT803X_DEBUG_ADDR 0x1D
	#define AT803X_DEBUG_DATA 0x1E

	#define AT803X_DEBUG_REG_0 0x00
	#define AT803X_DEBUG_RX_CLK_DLY_EN BIT(15)

	#define AT803X_DEBUG_REG_5 0x05
	#define AT803X_DEBUG_TX_CLK_DLY_EN BIT(8)

	#define AT803X_REG_CHIP_CONFIG 0x1f
	#define AT803X_BT_BX_REG_SEL 0x8000

	#define ATH8030_PHY_ID 0x004dd076
	#define ATH8031_PHY_ID 0x004dd074
	#define ATH8035_PHY_ID 0x004dd072

	MODULE_DESCRIPTION("Atheros 803x PHY driver");
	MODULE_AUTHOR("Matus Ujhelyi");
	MODULE_LICENSE("GPL");

	struct at803x_priv {
	bool phy_reset:1;
	struct gpio_desc *gpiod_reset;
	};

	struct at803x_context {
	u16 bmcr;
	u16 advertise;
	u16 control1000;
	u16 int_enable;
	u16 smart_speed;
	u16 led_control;
	};

	static int at803x_debug_reg_read(struct phy_device *phydev, u16 reg)
	{
	int ret;

	ret = phy_write(phydev, AT803X_DEBUG_ADDR, reg);
	if (ret < 0)
	return ret;

	return phy_read(phydev, AT803X_DEBUG_DATA);
	}

	static int at803x_debug_reg_mask(struct phy_device *phydev, u16 reg,
	u16 clear, u16 set)
	{
	u16 val;
	int ret;

	ret = at803x_debug_reg_read(phydev, reg);
	if (ret < 0)
	return ret;

	val = ret & 0xffff;
	val &= ~clear;
	val \|= set;

	return phy_write(phydev, AT803X_DEBUG_DATA, val);
	}

	static inline int at803x_enable_rx_delay(struct phy_device *phydev)
	{
	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, 0,
	AT803X_DEBUG_RX_CLK_DLY_EN);
	}

	static inline int at803x_enable_tx_delay(struct phy_device *phydev)
	{
	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0,
	AT803X_DEBUG_TX_CLK_DLY_EN);
	}

	/* save relevant PHY registers to private copy */
	static void at803x_context_save(struct phy_device *phydev,
	struct at803x_context *context)
	{
	context->bmcr = phy_read(phydev, MII_BMCR);
	context->advertise = phy_read(phydev, MII_ADVERTISE);
	context->control1000 = phy_read(phydev, MII_CTRL1000);
	context->int_enable = phy_read(phydev, AT803X_INTR_ENABLE);
	context->smart_speed = phy_read(phydev, AT803X_SMART_SPEED);
	context->led_control = phy_read(phydev, AT803X_LED_CONTROL);
	}

	/* restore relevant PHY registers from private copy */
	static void at803x_context_restore(struct phy_device *phydev,
	const struct at803x_context *context)
	{
	phy_write(phydev, MII_BMCR, context->bmcr);
	phy_write(phydev, MII_ADVERTISE, context->advertise);
	phy_write(phydev, MII_CTRL1000, context->control1000);
	phy_write(phydev, AT803X_INTR_ENABLE, context->int_enable);
	phy_write(phydev, AT803X_SMART_SPEED, context->smart_speed);
	phy_write(phydev, AT803X_LED_CONTROL, context->led_control);
	}

	static int at803x_set_wol(struct phy_device *phydev,
	struct ethtool_wolinfo *wol)
	{
	struct net_device *ndev = phydev->attached_dev;
	const u8 *mac;
	int ret;
	u32 value;
	unsigned int i, offsets[] = {
	AT803X_LOC_MAC_ADDR_32_47_OFFSET,
	AT803X_LOC_MAC_ADDR_16_31_OFFSET,
	AT803X_LOC_MAC_ADDR_0_15_OFFSET,
	};

	if (!ndev)
	return -ENODEV;

	if (wol->wolopts & WAKE_MAGIC) {
	mac = (const u8 *) ndev->dev_addr;

	if (!is_valid_ether_addr(mac))
	return -EFAULT;

	for (i = 0; i < 3; i++) {
	phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
	AT803X_DEVICE_ADDR);
	phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
	offsets[i]);
	phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
	AT803X_FUNC_DATA);
	phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
	mac[(i * 2) + 1] \| (mac[(i * 2)] << 8));
	}

	value = phy_read(phydev, AT803X_INTR_ENABLE);
	value \|= AT803X_INTR_ENABLE_WOL;
	ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
	if (ret)
	return ret;
	value = phy_read(phydev, AT803X_INTR_STATUS);
	} else {
	value = phy_read(phydev, AT803X_INTR_ENABLE);
	value &= (~AT803X_INTR_ENABLE_WOL);
	ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
	if (ret)
	return ret;
	value = phy_read(phydev, AT803X_INTR_STATUS);
	}

	return ret;
	}

	static void at803x_get_wol(struct phy_device *phydev,
	struct ethtool_wolinfo *wol)
	{
	u32 value;

	wol->supported = WAKE_MAGIC;
	wol->wolopts = 0;

	value = phy_read(phydev, AT803X_INTR_ENABLE);
	if (value & AT803X_INTR_ENABLE_WOL)
	wol->wolopts \|= WAKE_MAGIC;
	}

	static int at803x_suspend(struct phy_device *phydev)
	{
	int value;
	int wol_enabled;
	int ccr;

	mutex_lock(&phydev->lock);

	value = phy_read(phydev, AT803X_INTR_ENABLE);
	wol_enabled = value & AT803X_INTR_ENABLE_WOL;

	value = phy_read(phydev, MII_BMCR);

	if (wol_enabled)
	value \|= BMCR_ISOLATE;
	else
	value \|= BMCR_PDOWN;

	phy_write(phydev, MII_BMCR, value);

	if (phydev->interface != PHY_INTERFACE_MODE_SGMII)
	goto done;

	/* also power-down SGMII interface */
	ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
	phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr & ~AT803X_BT_BX_REG_SEL);
	phy_write(phydev, MII_BMCR, phy_read(phydev, MII_BMCR) \| BMCR_PDOWN);
	phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr \| AT803X_BT_BX_REG_SEL);

	done:
	mutex_unlock(&phydev->lock);

	return 0;
	}

	static int at803x_resume(struct phy_device *phydev)
	{
	int value;
	int ccr;

	mutex_lock(&phydev->lock);

	value = phy_read(phydev, MII_BMCR);
	value &= ~(BMCR_PDOWN \| BMCR_ISOLATE);
	phy_write(phydev, MII_BMCR, value);

	if (phydev->interface != PHY_INTERFACE_MODE_SGMII)
	goto done;

	/* also power-up SGMII interface */
	ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
	phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr & ~AT803X_BT_BX_REG_SEL);
	value = phy_read(phydev, MII_BMCR) & ~(BMCR_PDOWN \| BMCR_ISOLATE);
	phy_write(phydev, MII_BMCR, value);
	phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr \| AT803X_BT_BX_REG_SEL);

	done:
	mutex_unlock(&phydev->lock);

	return 0;
	}

	static int at803x_probe(struct phy_device *phydev)
	{
	struct device *dev = &phydev->mdio.dev;
	struct at803x_priv *priv;
	struct gpio_desc *gpiod_reset;

	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
	if (!priv)
	return -ENOMEM;

	gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
	if (IS_ERR(gpiod_reset))
	return PTR_ERR(gpiod_reset);

	priv->gpiod_reset = gpiod_reset;

	phydev->priv = priv;

	return 0;
	}

	static int at803x_config_init(struct phy_device *phydev)
	{
	int ret;

	ret = genphy_config_init(phydev);
	if (ret < 0)
	return ret;

	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID \|\|
	phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
	ret = at803x_enable_rx_delay(phydev);
	if (ret < 0)
	return ret;
	}

	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID \|\|
	phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
	ret = at803x_enable_tx_delay(phydev);
	if (ret < 0)
	return ret;
	}

	return 0;
	}

	static int at803x_ack_interrupt(struct phy_device *phydev)
	{
	int err;

	err = phy_read(phydev, AT803X_INTR_STATUS);

	return (err < 0) ? err : 0;
	}

	static int at803x_config_intr(struct phy_device *phydev)
	{
	int err;
	int value;

	value = phy_read(phydev, AT803X_INTR_ENABLE);

	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
	value \|= AT803X_INTR_ENABLE_AUTONEG_ERR;
	value \|= AT803X_INTR_ENABLE_SPEED_CHANGED;
	value \|= AT803X_INTR_ENABLE_DUPLEX_CHANGED;
	value \|= AT803X_INTR_ENABLE_LINK_FAIL;
	value \|= AT803X_INTR_ENABLE_LINK_SUCCESS;

	err = phy_write(phydev, AT803X_INTR_ENABLE, value);
	}
	else
	err = phy_write(phydev, AT803X_INTR_ENABLE, 0);

	return err;
	}

	static void at803x_link_change_notify(struct phy_device *phydev)
	{
	struct at803x_priv *priv = phydev->priv;

	/*
	* Conduct a hardware reset for AT8030 every time a link loss is
	* signalled. This is necessary to circumvent a hardware bug that
	* occurs when the cable is unplugged while TX packets are pending
	* in the FIFO. In such cases, the FIFO enters an error mode it
	* cannot recover from by software.
	*/
	if (phydev->drv->phy_id == ATH8030_PHY_ID) {
	if (phydev->state == PHY_NOLINK) {
	if (priv->gpiod_reset && !priv->phy_reset) {
	struct at803x_context context;

	at803x_context_save(phydev, &context);

	gpiod_set_value(priv->gpiod_reset, 0);
	msleep(1);
	gpiod_set_value(priv->gpiod_reset, 1);
	msleep(1);

	at803x_context_restore(phydev, &context);

	phydev_dbg(phydev, "%s(): phy was reset\n",
	__func__);
	priv->phy_reset = true;
	}
	} else {
	priv->phy_reset = false;
	}
	}
	}

	static struct phy_driver at803x_driver[] = {
	{
	/* ATHEROS 8035 */
	.phy_id = ATH8035_PHY_ID,
	.name = "Atheros 8035 ethernet",
	.phy_id_mask = 0xffffffef,
	.probe = at803x_probe,
	.config_init = at803x_config_init,
	.link_change_notify = at803x_link_change_notify,
	.set_wol = at803x_set_wol,
	.get_wol = at803x_get_wol,
	.suspend = at803x_suspend,
	.resume = at803x_resume,
	.features = PHY_GBIT_FEATURES,
	.flags = PHY_HAS_INTERRUPT,
	.config_aneg = genphy_config_aneg,
	.read_status = genphy_read_status,
	.ack_interrupt = at803x_ack_interrupt,
	.config_intr = at803x_config_intr,
	}, {
	/* ATHEROS 8030 */
	.phy_id = ATH8030_PHY_ID,
	.name = "Atheros 8030 ethernet",
	.phy_id_mask = 0xffffffef,
	.probe = at803x_probe,
	.config_init = at803x_config_init,
	.link_change_notify = at803x_link_change_notify,
	.set_wol = at803x_set_wol,
	.get_wol = at803x_get_wol,
	.suspend = at803x_suspend,
	.resume = at803x_resume,
	.features = PHY_BASIC_FEATURES,
	.flags = PHY_HAS_INTERRUPT,
	.config_aneg = genphy_config_aneg,
	.read_status = genphy_read_status,
	.ack_interrupt = at803x_ack_interrupt,
	.config_intr = at803x_config_intr,
	}, {
	/* ATHEROS 8031 */
	.phy_id = ATH8031_PHY_ID,
	.name = "Atheros 8031 ethernet",
	.phy_id_mask = 0xffffffef,
	.probe = at803x_probe,
	.config_init = at803x_config_init,
	.link_change_notify = at803x_link_change_notify,
	.set_wol = at803x_set_wol,
	.get_wol = at803x_get_wol,
	.suspend = at803x_suspend,
	.resume = at803x_resume,
	.features = PHY_GBIT_FEATURES,
	.flags = PHY_HAS_INTERRUPT,
	.config_aneg = genphy_config_aneg,
	.read_status = genphy_read_status,
	.ack_interrupt = &at803x_ack_interrupt,
	.config_intr = &at803x_config_intr,
	} };

	module_phy_driver(at803x_driver);

	static struct mdio_device_id __maybe_unused atheros_tbl[] = {
	{ ATH8030_PHY_ID, 0xffffffef },
	{ ATH8031_PHY_ID, 0xffffffef },
	{ ATH8035_PHY_ID, 0xffffffef },
	{ }
	};

	MODULE_DEVICE_TABLE(mdio, atheros_tbl);