| /* |
| raid0.c : Multiple Devices driver for Linux |
| Copyright (C) 1994-96 Marc ZYNGIER |
| <zyngier@ufr-info-p7.ibp.fr> or |
| <maz@gloups.fdn.fr> |
| Copyright (C) 1999, 2000 Ingo Molnar, Red Hat |
| |
| RAID-0 management functions. |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2, or (at your option) |
| any later version. |
| |
| You should have received a copy of the GNU General Public License |
| (for example /usr/src/linux/COPYING); if not, write to the Free |
| Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/blkdev.h> |
| #include <linux/seq_file.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <trace/events/block.h> |
| #include "md.h" |
| #include "raid0.h" |
| #include "raid5.h" |
| |
| #define UNSUPPORTED_MDDEV_FLAGS \ |
| ((1L << MD_HAS_JOURNAL) | \ |
| (1L << MD_JOURNAL_CLEAN) | \ |
| (1L << MD_FAILFAST_SUPPORTED)) |
| |
| static int raid0_congested(struct mddev *mddev, int bits) |
| { |
| struct r0conf *conf = mddev->private; |
| struct md_rdev **devlist = conf->devlist; |
| int raid_disks = conf->strip_zone[0].nb_dev; |
| int i, ret = 0; |
| |
| for (i = 0; i < raid_disks && !ret ; i++) { |
| struct request_queue *q = bdev_get_queue(devlist[i]->bdev); |
| |
| ret |= bdi_congested(&q->backing_dev_info, bits); |
| } |
| return ret; |
| } |
| |
| /* |
| * inform the user of the raid configuration |
| */ |
| static void dump_zones(struct mddev *mddev) |
| { |
| int j, k; |
| sector_t zone_size = 0; |
| sector_t zone_start = 0; |
| char b[BDEVNAME_SIZE]; |
| struct r0conf *conf = mddev->private; |
| int raid_disks = conf->strip_zone[0].nb_dev; |
| pr_debug("md: RAID0 configuration for %s - %d zone%s\n", |
| mdname(mddev), |
| conf->nr_strip_zones, conf->nr_strip_zones==1?"":"s"); |
| for (j = 0; j < conf->nr_strip_zones; j++) { |
| char line[200]; |
| int len = 0; |
| |
| for (k = 0; k < conf->strip_zone[j].nb_dev; k++) |
| len += snprintf(line+len, 200-len, "%s%s", k?"/":"", |
| bdevname(conf->devlist[j*raid_disks |
| + k]->bdev, b)); |
| pr_debug("md: zone%d=[%s]\n", j, line); |
| |
| zone_size = conf->strip_zone[j].zone_end - zone_start; |
| pr_debug(" zone-offset=%10lluKB, device-offset=%10lluKB, size=%10lluKB\n", |
| (unsigned long long)zone_start>>1, |
| (unsigned long long)conf->strip_zone[j].dev_start>>1, |
| (unsigned long long)zone_size>>1); |
| zone_start = conf->strip_zone[j].zone_end; |
| } |
| } |
| |
| static int create_strip_zones(struct mddev *mddev, struct r0conf **private_conf) |
| { |
| int i, c, err; |
| sector_t curr_zone_end, sectors; |
| struct md_rdev *smallest, *rdev1, *rdev2, *rdev, **dev; |
| struct strip_zone *zone; |
| int cnt; |
| char b[BDEVNAME_SIZE]; |
| char b2[BDEVNAME_SIZE]; |
| struct r0conf *conf = kzalloc(sizeof(*conf), GFP_KERNEL); |
| unsigned short blksize = 512; |
| |
| *private_conf = ERR_PTR(-ENOMEM); |
| if (!conf) |
| return -ENOMEM; |
| rdev_for_each(rdev1, mddev) { |
| pr_debug("md/raid0:%s: looking at %s\n", |
| mdname(mddev), |
| bdevname(rdev1->bdev, b)); |
| c = 0; |
| |
| /* round size to chunk_size */ |
| sectors = rdev1->sectors; |
| sector_div(sectors, mddev->chunk_sectors); |
| rdev1->sectors = sectors * mddev->chunk_sectors; |
| |
| blksize = max(blksize, queue_logical_block_size( |
| rdev1->bdev->bd_disk->queue)); |
| |
| rdev_for_each(rdev2, mddev) { |
| pr_debug("md/raid0:%s: comparing %s(%llu)" |
| " with %s(%llu)\n", |
| mdname(mddev), |
| bdevname(rdev1->bdev,b), |
| (unsigned long long)rdev1->sectors, |
| bdevname(rdev2->bdev,b2), |
| (unsigned long long)rdev2->sectors); |
| if (rdev2 == rdev1) { |
| pr_debug("md/raid0:%s: END\n", |
| mdname(mddev)); |
| break; |
| } |
| if (rdev2->sectors == rdev1->sectors) { |
| /* |
| * Not unique, don't count it as a new |
| * group |
| */ |
| pr_debug("md/raid0:%s: EQUAL\n", |
| mdname(mddev)); |
| c = 1; |
| break; |
| } |
| pr_debug("md/raid0:%s: NOT EQUAL\n", |
| mdname(mddev)); |
| } |
| if (!c) { |
| pr_debug("md/raid0:%s: ==> UNIQUE\n", |
| mdname(mddev)); |
| conf->nr_strip_zones++; |
| pr_debug("md/raid0:%s: %d zones\n", |
| mdname(mddev), conf->nr_strip_zones); |
| } |
| } |
| pr_debug("md/raid0:%s: FINAL %d zones\n", |
| mdname(mddev), conf->nr_strip_zones); |
| /* |
| * now since we have the hard sector sizes, we can make sure |
| * chunk size is a multiple of that sector size |
| */ |
| if ((mddev->chunk_sectors << 9) % blksize) { |
| pr_warn("md/raid0:%s: chunk_size of %d not multiple of block size %d\n", |
| mdname(mddev), |
| mddev->chunk_sectors << 9, blksize); |
| err = -EINVAL; |
| goto abort; |
| } |
| |
| err = -ENOMEM; |
| conf->strip_zone = kzalloc(sizeof(struct strip_zone)* |
| conf->nr_strip_zones, GFP_KERNEL); |
| if (!conf->strip_zone) |
| goto abort; |
| conf->devlist = kzalloc(sizeof(struct md_rdev*)* |
| conf->nr_strip_zones*mddev->raid_disks, |
| GFP_KERNEL); |
| if (!conf->devlist) |
| goto abort; |
| |
| /* The first zone must contain all devices, so here we check that |
| * there is a proper alignment of slots to devices and find them all |
| */ |
| zone = &conf->strip_zone[0]; |
| cnt = 0; |
| smallest = NULL; |
| dev = conf->devlist; |
| err = -EINVAL; |
| rdev_for_each(rdev1, mddev) { |
| int j = rdev1->raid_disk; |
| |
| if (mddev->level == 10) { |
| /* taking over a raid10-n2 array */ |
| j /= 2; |
| rdev1->new_raid_disk = j; |
| } |
| |
| if (mddev->level == 1) { |
| /* taiking over a raid1 array- |
| * we have only one active disk |
| */ |
| j = 0; |
| rdev1->new_raid_disk = j; |
| } |
| |
| if (j < 0) { |
| pr_warn("md/raid0:%s: remove inactive devices before converting to RAID0\n", |
| mdname(mddev)); |
| goto abort; |
| } |
| if (j >= mddev->raid_disks) { |
| pr_warn("md/raid0:%s: bad disk number %d - aborting!\n", |
| mdname(mddev), j); |
| goto abort; |
| } |
| if (dev[j]) { |
| pr_warn("md/raid0:%s: multiple devices for %d - aborting!\n", |
| mdname(mddev), j); |
| goto abort; |
| } |
| dev[j] = rdev1; |
| |
| if (!smallest || (rdev1->sectors < smallest->sectors)) |
| smallest = rdev1; |
| cnt++; |
| } |
| if (cnt != mddev->raid_disks) { |
| pr_warn("md/raid0:%s: too few disks (%d of %d) - aborting!\n", |
| mdname(mddev), cnt, mddev->raid_disks); |
| goto abort; |
| } |
| zone->nb_dev = cnt; |
| zone->zone_end = smallest->sectors * cnt; |
| |
| curr_zone_end = zone->zone_end; |
| |
| /* now do the other zones */ |
| for (i = 1; i < conf->nr_strip_zones; i++) |
| { |
| int j; |
| |
| zone = conf->strip_zone + i; |
| dev = conf->devlist + i * mddev->raid_disks; |
| |
| pr_debug("md/raid0:%s: zone %d\n", mdname(mddev), i); |
| zone->dev_start = smallest->sectors; |
| smallest = NULL; |
| c = 0; |
| |
| for (j=0; j<cnt; j++) { |
| rdev = conf->devlist[j]; |
| if (rdev->sectors <= zone->dev_start) { |
| pr_debug("md/raid0:%s: checking %s ... nope\n", |
| mdname(mddev), |
| bdevname(rdev->bdev, b)); |
| continue; |
| } |
| pr_debug("md/raid0:%s: checking %s ..." |
| " contained as device %d\n", |
| mdname(mddev), |
| bdevname(rdev->bdev, b), c); |
| dev[c] = rdev; |
| c++; |
| if (!smallest || rdev->sectors < smallest->sectors) { |
| smallest = rdev; |
| pr_debug("md/raid0:%s: (%llu) is smallest!.\n", |
| mdname(mddev), |
| (unsigned long long)rdev->sectors); |
| } |
| } |
| |
| zone->nb_dev = c; |
| sectors = (smallest->sectors - zone->dev_start) * c; |
| pr_debug("md/raid0:%s: zone->nb_dev: %d, sectors: %llu\n", |
| mdname(mddev), |
| zone->nb_dev, (unsigned long long)sectors); |
| |
| curr_zone_end += sectors; |
| zone->zone_end = curr_zone_end; |
| |
| pr_debug("md/raid0:%s: current zone start: %llu\n", |
| mdname(mddev), |
| (unsigned long long)smallest->sectors); |
| } |
| |
| pr_debug("md/raid0:%s: done.\n", mdname(mddev)); |
| *private_conf = conf; |
| |
| return 0; |
| abort: |
| kfree(conf->strip_zone); |
| kfree(conf->devlist); |
| kfree(conf); |
| *private_conf = ERR_PTR(err); |
| return err; |
| } |
| |
| /* Find the zone which holds a particular offset |
| * Update *sectorp to be an offset in that zone |
| */ |
| static struct strip_zone *find_zone(struct r0conf *conf, |
| sector_t *sectorp) |
| { |
| int i; |
| struct strip_zone *z = conf->strip_zone; |
| sector_t sector = *sectorp; |
| |
| for (i = 0; i < conf->nr_strip_zones; i++) |
| if (sector < z[i].zone_end) { |
| if (i) |
| *sectorp = sector - z[i-1].zone_end; |
| return z + i; |
| } |
| BUG(); |
| } |
| |
| /* |
| * remaps the bio to the target device. we separate two flows. |
| * power 2 flow and a general flow for the sake of performance |
| */ |
| static struct md_rdev *map_sector(struct mddev *mddev, struct strip_zone *zone, |
| sector_t sector, sector_t *sector_offset) |
| { |
| unsigned int sect_in_chunk; |
| sector_t chunk; |
| struct r0conf *conf = mddev->private; |
| int raid_disks = conf->strip_zone[0].nb_dev; |
| unsigned int chunk_sects = mddev->chunk_sectors; |
| |
| if (is_power_of_2(chunk_sects)) { |
| int chunksect_bits = ffz(~chunk_sects); |
| /* find the sector offset inside the chunk */ |
| sect_in_chunk = sector & (chunk_sects - 1); |
| sector >>= chunksect_bits; |
| /* chunk in zone */ |
| chunk = *sector_offset; |
| /* quotient is the chunk in real device*/ |
| sector_div(chunk, zone->nb_dev << chunksect_bits); |
| } else{ |
| sect_in_chunk = sector_div(sector, chunk_sects); |
| chunk = *sector_offset; |
| sector_div(chunk, chunk_sects * zone->nb_dev); |
| } |
| /* |
| * position the bio over the real device |
| * real sector = chunk in device + starting of zone |
| * + the position in the chunk |
| */ |
| *sector_offset = (chunk * chunk_sects) + sect_in_chunk; |
| return conf->devlist[(zone - conf->strip_zone)*raid_disks |
| + sector_div(sector, zone->nb_dev)]; |
| } |
| |
| static sector_t raid0_size(struct mddev *mddev, sector_t sectors, int raid_disks) |
| { |
| sector_t array_sectors = 0; |
| struct md_rdev *rdev; |
| |
| WARN_ONCE(sectors || raid_disks, |
| "%s does not support generic reshape\n", __func__); |
| |
| rdev_for_each(rdev, mddev) |
| array_sectors += (rdev->sectors & |
| ~(sector_t)(mddev->chunk_sectors-1)); |
| |
| return array_sectors; |
| } |
| |
| static void raid0_free(struct mddev *mddev, void *priv); |
| |
| static int raid0_run(struct mddev *mddev) |
| { |
| struct r0conf *conf; |
| int ret; |
| |
| if (mddev->chunk_sectors == 0) { |
| pr_warn("md/raid0:%s: chunk size must be set.\n", mdname(mddev)); |
| return -EINVAL; |
| } |
| if (md_check_no_bitmap(mddev)) |
| return -EINVAL; |
| |
| /* if private is not null, we are here after takeover */ |
| if (mddev->private == NULL) { |
| ret = create_strip_zones(mddev, &conf); |
| if (ret < 0) |
| return ret; |
| mddev->private = conf; |
| } |
| conf = mddev->private; |
| if (mddev->queue) { |
| struct md_rdev *rdev; |
| bool discard_supported = false; |
| |
| blk_queue_max_hw_sectors(mddev->queue, mddev->chunk_sectors); |
| blk_queue_max_write_same_sectors(mddev->queue, mddev->chunk_sectors); |
| blk_queue_max_discard_sectors(mddev->queue, mddev->chunk_sectors); |
| |
| blk_queue_io_min(mddev->queue, mddev->chunk_sectors << 9); |
| blk_queue_io_opt(mddev->queue, |
| (mddev->chunk_sectors << 9) * mddev->raid_disks); |
| |
| rdev_for_each(rdev, mddev) { |
| disk_stack_limits(mddev->gendisk, rdev->bdev, |
| rdev->data_offset << 9); |
| if (blk_queue_discard(bdev_get_queue(rdev->bdev))) |
| discard_supported = true; |
| } |
| if (!discard_supported) |
| queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, mddev->queue); |
| else |
| queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mddev->queue); |
| } |
| |
| /* calculate array device size */ |
| md_set_array_sectors(mddev, raid0_size(mddev, 0, 0)); |
| |
| pr_debug("md/raid0:%s: md_size is %llu sectors.\n", |
| mdname(mddev), |
| (unsigned long long)mddev->array_sectors); |
| |
| if (mddev->queue) { |
| /* calculate the max read-ahead size. |
| * For read-ahead of large files to be effective, we need to |
| * readahead at least twice a whole stripe. i.e. number of devices |
| * multiplied by chunk size times 2. |
| * If an individual device has an ra_pages greater than the |
| * chunk size, then we will not drive that device as hard as it |
| * wants. We consider this a configuration error: a larger |
| * chunksize should be used in that case. |
| */ |
| int stripe = mddev->raid_disks * |
| (mddev->chunk_sectors << 9) / PAGE_SIZE; |
| if (mddev->queue->backing_dev_info.ra_pages < 2* stripe) |
| mddev->queue->backing_dev_info.ra_pages = 2* stripe; |
| } |
| |
| dump_zones(mddev); |
| |
| ret = md_integrity_register(mddev); |
| |
| return ret; |
| } |
| |
| static void raid0_free(struct mddev *mddev, void *priv) |
| { |
| struct r0conf *conf = priv; |
| |
| kfree(conf->strip_zone); |
| kfree(conf->devlist); |
| kfree(conf); |
| } |
| |
| /* |
| * Is io distribute over 1 or more chunks ? |
| */ |
| static inline int is_io_in_chunk_boundary(struct mddev *mddev, |
| unsigned int chunk_sects, struct bio *bio) |
| { |
| if (likely(is_power_of_2(chunk_sects))) { |
| return chunk_sects >= |
| ((bio->bi_iter.bi_sector & (chunk_sects-1)) |
| + bio_sectors(bio)); |
| } else{ |
| sector_t sector = bio->bi_iter.bi_sector; |
| return chunk_sects >= (sector_div(sector, chunk_sects) |
| + bio_sectors(bio)); |
| } |
| } |
| |
| static void raid0_make_request(struct mddev *mddev, struct bio *bio) |
| { |
| struct strip_zone *zone; |
| struct md_rdev *tmp_dev; |
| struct bio *split; |
| |
| if (unlikely(bio->bi_opf & REQ_PREFLUSH)) { |
| md_flush_request(mddev, bio); |
| return; |
| } |
| |
| do { |
| sector_t bio_sector = bio->bi_iter.bi_sector; |
| sector_t sector = bio_sector; |
| unsigned chunk_sects = mddev->chunk_sectors; |
| |
| unsigned sectors = chunk_sects - |
| (likely(is_power_of_2(chunk_sects)) |
| ? (sector & (chunk_sects-1)) |
| : sector_div(sector, chunk_sects)); |
| |
| /* Restore due to sector_div */ |
| sector = bio_sector; |
| |
| if (sectors < bio_sectors(bio)) { |
| split = bio_split(bio, sectors, GFP_NOIO, fs_bio_set); |
| bio_chain(split, bio); |
| } else { |
| split = bio; |
| } |
| |
| zone = find_zone(mddev->private, §or); |
| tmp_dev = map_sector(mddev, zone, sector, §or); |
| split->bi_bdev = tmp_dev->bdev; |
| split->bi_iter.bi_sector = sector + zone->dev_start + |
| tmp_dev->data_offset; |
| |
| if (unlikely((bio_op(split) == REQ_OP_DISCARD) && |
| !blk_queue_discard(bdev_get_queue(split->bi_bdev)))) { |
| /* Just ignore it */ |
| bio_endio(split); |
| } else { |
| if (mddev->gendisk) |
| trace_block_bio_remap(bdev_get_queue(split->bi_bdev), |
| split, disk_devt(mddev->gendisk), |
| bio_sector); |
| generic_make_request(split); |
| } |
| } while (split != bio); |
| } |
| |
| static void raid0_status(struct seq_file *seq, struct mddev *mddev) |
| { |
| seq_printf(seq, " %dk chunks", mddev->chunk_sectors / 2); |
| return; |
| } |
| |
| static void *raid0_takeover_raid45(struct mddev *mddev) |
| { |
| struct md_rdev *rdev; |
| struct r0conf *priv_conf; |
| |
| if (mddev->degraded != 1) { |
| pr_warn("md/raid0:%s: raid5 must be degraded! Degraded disks: %d\n", |
| mdname(mddev), |
| mddev->degraded); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| rdev_for_each(rdev, mddev) { |
| /* check slot number for a disk */ |
| if (rdev->raid_disk == mddev->raid_disks-1) { |
| pr_warn("md/raid0:%s: raid5 must have missing parity disk!\n", |
| mdname(mddev)); |
| return ERR_PTR(-EINVAL); |
| } |
| rdev->sectors = mddev->dev_sectors; |
| } |
| |
| /* Set new parameters */ |
| mddev->new_level = 0; |
| mddev->new_layout = 0; |
| mddev->new_chunk_sectors = mddev->chunk_sectors; |
| mddev->raid_disks--; |
| mddev->delta_disks = -1; |
| /* make sure it will be not marked as dirty */ |
| mddev->recovery_cp = MaxSector; |
| mddev_clear_unsupported_flags(mddev, UNSUPPORTED_MDDEV_FLAGS); |
| |
| create_strip_zones(mddev, &priv_conf); |
| |
| return priv_conf; |
| } |
| |
| static void *raid0_takeover_raid10(struct mddev *mddev) |
| { |
| struct r0conf *priv_conf; |
| |
| /* Check layout: |
| * - far_copies must be 1 |
| * - near_copies must be 2 |
| * - disks number must be even |
| * - all mirrors must be already degraded |
| */ |
| if (mddev->layout != ((1 << 8) + 2)) { |
| pr_warn("md/raid0:%s:: Raid0 cannot takeover layout: 0x%x\n", |
| mdname(mddev), |
| mddev->layout); |
| return ERR_PTR(-EINVAL); |
| } |
| if (mddev->raid_disks & 1) { |
| pr_warn("md/raid0:%s: Raid0 cannot takeover Raid10 with odd disk number.\n", |
| mdname(mddev)); |
| return ERR_PTR(-EINVAL); |
| } |
| if (mddev->degraded != (mddev->raid_disks>>1)) { |
| pr_warn("md/raid0:%s: All mirrors must be already degraded!\n", |
| mdname(mddev)); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| /* Set new parameters */ |
| mddev->new_level = 0; |
| mddev->new_layout = 0; |
| mddev->new_chunk_sectors = mddev->chunk_sectors; |
| mddev->delta_disks = - mddev->raid_disks / 2; |
| mddev->raid_disks += mddev->delta_disks; |
| mddev->degraded = 0; |
| /* make sure it will be not marked as dirty */ |
| mddev->recovery_cp = MaxSector; |
| mddev_clear_unsupported_flags(mddev, UNSUPPORTED_MDDEV_FLAGS); |
| |
| create_strip_zones(mddev, &priv_conf); |
| return priv_conf; |
| } |
| |
| static void *raid0_takeover_raid1(struct mddev *mddev) |
| { |
| struct r0conf *priv_conf; |
| int chunksect; |
| |
| /* Check layout: |
| * - (N - 1) mirror drives must be already faulty |
| */ |
| if ((mddev->raid_disks - 1) != mddev->degraded) { |
| pr_err("md/raid0:%s: (N - 1) mirrors drives must be already faulty!\n", |
| mdname(mddev)); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| /* |
| * a raid1 doesn't have the notion of chunk size, so |
| * figure out the largest suitable size we can use. |
| */ |
| chunksect = 64 * 2; /* 64K by default */ |
| |
| /* The array must be an exact multiple of chunksize */ |
| while (chunksect && (mddev->array_sectors & (chunksect - 1))) |
| chunksect >>= 1; |
| |
| if ((chunksect << 9) < PAGE_SIZE) |
| /* array size does not allow a suitable chunk size */ |
| return ERR_PTR(-EINVAL); |
| |
| /* Set new parameters */ |
| mddev->new_level = 0; |
| mddev->new_layout = 0; |
| mddev->new_chunk_sectors = chunksect; |
| mddev->chunk_sectors = chunksect; |
| mddev->delta_disks = 1 - mddev->raid_disks; |
| mddev->raid_disks = 1; |
| /* make sure it will be not marked as dirty */ |
| mddev->recovery_cp = MaxSector; |
| mddev_clear_unsupported_flags(mddev, UNSUPPORTED_MDDEV_FLAGS); |
| |
| create_strip_zones(mddev, &priv_conf); |
| return priv_conf; |
| } |
| |
| static void *raid0_takeover(struct mddev *mddev) |
| { |
| /* raid0 can take over: |
| * raid4 - if all data disks are active. |
| * raid5 - providing it is Raid4 layout and one disk is faulty |
| * raid10 - assuming we have all necessary active disks |
| * raid1 - with (N -1) mirror drives faulty |
| */ |
| |
| if (mddev->bitmap) { |
| pr_warn("md/raid0: %s: cannot takeover array with bitmap\n", |
| mdname(mddev)); |
| return ERR_PTR(-EBUSY); |
| } |
| if (mddev->level == 4) |
| return raid0_takeover_raid45(mddev); |
| |
| if (mddev->level == 5) { |
| if (mddev->layout == ALGORITHM_PARITY_N) |
| return raid0_takeover_raid45(mddev); |
| |
| pr_warn("md/raid0:%s: Raid can only takeover Raid5 with layout: %d\n", |
| mdname(mddev), ALGORITHM_PARITY_N); |
| } |
| |
| if (mddev->level == 10) |
| return raid0_takeover_raid10(mddev); |
| |
| if (mddev->level == 1) |
| return raid0_takeover_raid1(mddev); |
| |
| pr_warn("Takeover from raid%i to raid0 not supported\n", |
| mddev->level); |
| |
| return ERR_PTR(-EINVAL); |
| } |
| |
| static void raid0_quiesce(struct mddev *mddev, int state) |
| { |
| } |
| |
| static struct md_personality raid0_personality= |
| { |
| .name = "raid0", |
| .level = 0, |
| .owner = THIS_MODULE, |
| .make_request = raid0_make_request, |
| .run = raid0_run, |
| .free = raid0_free, |
| .status = raid0_status, |
| .size = raid0_size, |
| .takeover = raid0_takeover, |
| .quiesce = raid0_quiesce, |
| .congested = raid0_congested, |
| }; |
| |
| static int __init raid0_init (void) |
| { |
| return register_md_personality (&raid0_personality); |
| } |
| |
| static void raid0_exit (void) |
| { |
| unregister_md_personality (&raid0_personality); |
| } |
| |
| module_init(raid0_init); |
| module_exit(raid0_exit); |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("RAID0 (striping) personality for MD"); |
| MODULE_ALIAS("md-personality-2"); /* RAID0 */ |
| MODULE_ALIAS("md-raid0"); |
| MODULE_ALIAS("md-level-0"); |