| Kernel driver i2c-nforce2 |
| |
| Supported adapters: |
| * nForce2 MCP 10de:0064 |
| * nForce2 Ultra 400 MCP 10de:0084 |
| * nForce3 Pro150 MCP 10de:00D4 |
| * nForce3 250Gb MCP 10de:00E4 |
| * nForce4 MCP 10de:0052 |
| * nForce4 MCP-04 10de:0034 |
| * nForce4 MCP51 10de:0264 |
| * nForce4 MCP55 10de:0368 |
| |
| Datasheet: not publicly available, but seems to be similar to the |
| AMD-8111 SMBus 2.0 adapter. |
| |
| Authors: |
| Hans-Frieder Vogt <hfvogt@gmx.net>, |
| Thomas Leibold <thomas@plx.com>, |
| Patrick Dreker <patrick@dreker.de> |
| |
| Description |
| ----------- |
| |
| i2c-nforce2 is a driver for the SMBuses included in the nVidia nForce2 MCP. |
| |
| If your 'lspci -v' listing shows something like the following, |
| |
| 00:01.1 SMBus: nVidia Corporation: Unknown device 0064 (rev a2) |
| Subsystem: Asustek Computer, Inc.: Unknown device 0c11 |
| Flags: 66Mhz, fast devsel, IRQ 5 |
| I/O ports at c000 [size=32] |
| Capabilities: <available only to root> |
| |
| then this driver should support the SMBuses of your motherboard. |
| |
| |
| Notes |
| ----- |
| |
| The SMBus adapter in the nForce2 chipset seems to be very similar to the |
| SMBus 2.0 adapter in the AMD-8111 south bridge. However, I could only get |
| the driver to work with direct I/O access, which is different to the EC |
| interface of the AMD-8111. Tested on Asus A7N8X. The ACPI DSDT table of the |
| Asus A7N8X lists two SMBuses, both of which are supported by this driver. |