| /* |
| * linux/drivers/acorn/scsi/fas216.h |
| * |
| * Copyright (C) 1997-2000 Russell King |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * FAS216 generic driver |
| */ |
| #ifndef FAS216_H |
| #define FAS216_H |
| |
| #ifndef NO_IRQ |
| #define NO_IRQ 255 |
| #endif |
| |
| #include "queue.h" |
| #include "msgqueue.h" |
| |
| /* FAS register definitions */ |
| |
| /* transfer count low */ |
| #define REG_CTCL (0) |
| #define REG_STCL (0) |
| |
| /* transfer count medium */ |
| #define REG_CTCM (1) |
| #define REG_STCM (1) |
| |
| /* fifo data */ |
| #define REG_FF (2) |
| |
| /* command */ |
| #define REG_CMD (3) |
| #define CMD_NOP 0x00 |
| #define CMD_FLUSHFIFO 0x01 |
| #define CMD_RESETCHIP 0x02 |
| #define CMD_RESETSCSI 0x03 |
| |
| #define CMD_TRANSFERINFO 0x10 |
| #define CMD_INITCMDCOMPLETE 0x11 |
| #define CMD_MSGACCEPTED 0x12 |
| #define CMD_PADBYTES 0x18 |
| #define CMD_SETATN 0x1a |
| #define CMD_RSETATN 0x1b |
| |
| #define CMD_SELECTWOATN 0x41 |
| #define CMD_SELECTATN 0x42 |
| #define CMD_SELECTATNSTOP 0x43 |
| #define CMD_ENABLESEL 0x44 |
| #define CMD_DISABLESEL 0x45 |
| #define CMD_SELECTATN3 0x46 |
| #define CMD_RESEL3 0x47 |
| |
| #define CMD_WITHDMA 0x80 |
| |
| /* status register (read) */ |
| #define REG_STAT (4) |
| #define STAT_IO (1 << 0) /* IO phase */ |
| #define STAT_CD (1 << 1) /* CD phase */ |
| #define STAT_MSG (1 << 2) /* MSG phase */ |
| #define STAT_TRANSFERDONE (1 << 3) /* Transfer completed */ |
| #define STAT_TRANSFERCNTZ (1 << 4) /* Transfer counter is zero */ |
| #define STAT_PARITYERROR (1 << 5) /* Parity error */ |
| #define STAT_REALBAD (1 << 6) /* Something bad */ |
| #define STAT_INT (1 << 7) /* Interrupt */ |
| |
| #define STAT_BUSMASK (STAT_MSG|STAT_CD|STAT_IO) |
| #define STAT_DATAOUT (0) /* Data out */ |
| #define STAT_DATAIN (STAT_IO) /* Data in */ |
| #define STAT_COMMAND (STAT_CD) /* Command out */ |
| #define STAT_STATUS (STAT_CD|STAT_IO) /* Status In */ |
| #define STAT_MESGOUT (STAT_MSG|STAT_CD) /* Message out */ |
| #define STAT_MESGIN (STAT_MSG|STAT_CD|STAT_IO) /* Message In */ |
| |
| /* bus ID for select / reselect */ |
| #define REG_SDID (4) |
| #define BUSID(target) ((target) & 7) |
| |
| /* Interrupt status register (read) */ |
| #define REG_INST (5) |
| #define INST_SELWOATN (1 << 0) /* Select w/o ATN */ |
| #define INST_SELATN (1 << 1) /* Select w/ATN */ |
| #define INST_RESELECTED (1 << 2) /* Reselected */ |
| #define INST_FUNCDONE (1 << 3) /* Function done */ |
| #define INST_BUSSERVICE (1 << 4) /* Bus service */ |
| #define INST_DISCONNECT (1 << 5) /* Disconnect */ |
| #define INST_ILLEGALCMD (1 << 6) /* Illegal command */ |
| #define INST_BUSRESET (1 << 7) /* SCSI Bus reset */ |
| |
| /* Timeout register (write) */ |
| #define REG_STIM (5) |
| |
| /* Sequence step register (read) */ |
| #define REG_IS (6) |
| #define IS_BITS 0x07 |
| #define IS_SELARB 0x00 /* Select & Arb ok */ |
| #define IS_MSGBYTESENT 0x01 /* One byte message sent*/ |
| #define IS_NOTCOMMAND 0x02 /* Not in command state */ |
| #define IS_EARLYPHASE 0x03 /* Early phase change */ |
| #define IS_COMPLETE 0x04 /* Command ok */ |
| #define IS_SOF 0x08 /* Sync off flag */ |
| |
| /* Transfer period step (write) */ |
| #define REG_STP (6) |
| |
| /* Synchronous Offset (write) */ |
| #define REG_SOF (7) |
| |
| /* Fifo state register (read) */ |
| #define REG_CFIS (7) |
| #define CFIS_CF 0x1f /* Num bytes in FIFO */ |
| #define CFIS_IS 0xe0 /* Step */ |
| |
| /* config register 1 */ |
| #define REG_CNTL1 (8) |
| #define CNTL1_CID (7 << 0) /* Chip ID */ |
| #define CNTL1_STE (1 << 3) /* Self test enable */ |
| #define CNTL1_PERE (1 << 4) /* Parity enable reporting en. */ |
| #define CNTL1_PTE (1 << 5) /* Parity test enable */ |
| #define CNTL1_DISR (1 << 6) /* Disable Irq on SCSI reset */ |
| #define CNTL1_ETM (1 << 7) /* Extended Timing Mode */ |
| |
| /* Clock conversion factor (read) */ |
| #define REG_CLKF (9) |
| #define CLKF_F37MHZ 0x00 /* 35.01 - 40 MHz */ |
| #define CLKF_F10MHZ 0x02 /* 10 MHz */ |
| #define CLKF_F12MHZ 0x03 /* 10.01 - 15 MHz */ |
| #define CLKF_F17MHZ 0x04 /* 15.01 - 20 MHz */ |
| #define CLKF_F22MHZ 0x05 /* 20.01 - 25 MHz */ |
| #define CLKF_F27MHZ 0x06 /* 25.01 - 30 MHz */ |
| #define CLKF_F32MHZ 0x07 /* 30.01 - 35 MHz */ |
| |
| /* Chip test register (write) */ |
| #define REG_FTM (10) |
| #define TEST_FTM 0x01 /* Force target mode */ |
| #define TEST_FIM 0x02 /* Force initiator mode */ |
| #define TEST_FHI 0x04 /* Force high impedance mode */ |
| |
| /* Configuration register 2 (read/write) */ |
| #define REG_CNTL2 (11) |
| #define CNTL2_PGDP (1 << 0) /* Pass Th/Generate Data Parity */ |
| #define CNTL2_PGRP (1 << 1) /* Pass Th/Generate Reg Parity */ |
| #define CNTL2_ACDPE (1 << 2) /* Abort on Cmd/Data Parity Err */ |
| #define CNTL2_S2FE (1 << 3) /* SCSI2 Features Enable */ |
| #define CNTL2_TSDR (1 << 4) /* Tristate DREQ */ |
| #define CNTL2_SBO (1 << 5) /* Select Byte Order */ |
| #define CNTL2_ENF (1 << 6) /* Enable features */ |
| #define CNTL2_DAE (1 << 7) /* Data Alignment Enable */ |
| |
| /* Configuration register 3 (read/write) */ |
| #define REG_CNTL3 (12) |
| #define CNTL3_BS8 (1 << 0) /* Burst size 8 */ |
| #define CNTL3_MDM (1 << 1) /* Modify DMA mode */ |
| #define CNTL3_LBTM (1 << 2) /* Last Byte Transfer mode */ |
| #define CNTL3_FASTCLK (1 << 3) /* Fast SCSI clocking */ |
| #define CNTL3_FASTSCSI (1 << 4) /* Fast SCSI */ |
| #define CNTL3_G2CB (1 << 5) /* Group2 SCSI support */ |
| #define CNTL3_QTAG (1 << 6) /* Enable 3 byte msgs */ |
| #define CNTL3_ADIDCHK (1 << 7) /* Additional ID check */ |
| |
| /* High transfer count (read/write) */ |
| #define REG_CTCH (14) |
| #define REG_STCH (14) |
| |
| /* ID register (read only) */ |
| #define REG_ID (14) |
| |
| /* Data alignment */ |
| #define REG_DAL (15) |
| |
| typedef enum { |
| PHASE_IDLE, /* we're not planning on doing anything */ |
| PHASE_SELECTION, /* selecting a device */ |
| PHASE_SELSTEPS, /* selection with command steps */ |
| PHASE_COMMAND, /* command sent */ |
| PHASE_MESSAGESENT, /* selected, and we're sending cmd */ |
| PHASE_DATAOUT, /* data out to device */ |
| PHASE_DATAIN, /* data in from device */ |
| PHASE_MSGIN, /* message in from device */ |
| PHASE_MSGIN_DISCONNECT, /* disconnecting from bus */ |
| PHASE_MSGOUT, /* after message out phase */ |
| PHASE_MSGOUT_EXPECT, /* expecting message out */ |
| PHASE_STATUS, /* status from device */ |
| PHASE_DONE /* Command complete */ |
| } phase_t; |
| |
| typedef enum { |
| DMA_OUT, /* DMA from memory to chip */ |
| DMA_IN /* DMA from chip to memory */ |
| } fasdmadir_t; |
| |
| typedef enum { |
| fasdma_none, /* No dma */ |
| fasdma_pio, /* PIO mode */ |
| fasdma_pseudo, /* Pseudo DMA */ |
| fasdma_real_block, /* Real DMA, on block by block basis */ |
| fasdma_real_all /* Real DMA, on request by request */ |
| } fasdmatype_t; |
| |
| typedef enum { |
| neg_wait, /* Negociate with device */ |
| neg_inprogress, /* Negociation sent */ |
| neg_complete, /* Negociation complete */ |
| neg_targcomplete, /* Target completed negociation */ |
| neg_invalid /* Negociation not supported */ |
| } neg_t; |
| |
| #define MAGIC 0x441296bdUL |
| #define NR_MSGS 8 |
| |
| #define FASCAP_DMA (1 << 0) |
| #define FASCAP_PSEUDODMA (1 << 1) |
| |
| typedef struct { |
| unsigned long magic_start; |
| spinlock_t host_lock; |
| struct Scsi_Host *host; /* host */ |
| struct scsi_cmnd *SCpnt; /* currently processing command */ |
| struct scsi_cmnd *origSCpnt; /* original connecting command */ |
| struct scsi_cmnd *reqSCpnt; /* request sense command */ |
| struct scsi_cmnd *rstSCpnt; /* reset command */ |
| struct scsi_cmnd *pending_SCpnt[8]; /* per-device pending commands */ |
| int next_pending; /* next pending device */ |
| |
| /* |
| * Error recovery |
| */ |
| wait_queue_head_t eh_wait; |
| struct timer_list eh_timer; |
| unsigned int rst_dev_status; |
| unsigned int rst_bus_status; |
| |
| /* driver information */ |
| struct { |
| phase_t phase; /* current phase */ |
| void __iomem *io_base; /* iomem base of FAS216 */ |
| unsigned int io_shift; /* shift to adjust reg offsets by */ |
| unsigned char cfg[4]; /* configuration registers */ |
| const char *type; /* chip type */ |
| unsigned int irq; /* interrupt */ |
| int dma; /* dma channel */ |
| |
| struct scsi_pointer SCp; /* current commands data pointer */ |
| |
| MsgQueue_t msgs; /* message queue for connected device */ |
| |
| unsigned int async_stp; /* Async transfer STP value */ |
| unsigned char msgin_fifo; /* bytes in fifo at time of message in */ |
| unsigned char message[256]; /* last message received from device */ |
| |
| unsigned char disconnectable:1; /* this command can be disconnected */ |
| unsigned char aborting:1; /* aborting command */ |
| } scsi; |
| |
| /* statistics information */ |
| struct { |
| unsigned int queues; |
| unsigned int removes; |
| unsigned int fins; |
| unsigned int reads; |
| unsigned int writes; |
| unsigned int miscs; |
| unsigned int disconnects; |
| unsigned int aborts; |
| unsigned int bus_resets; |
| unsigned int host_resets; |
| } stats; |
| |
| /* configuration information */ |
| struct { |
| unsigned char clockrate; /* clock rate of FAS device (MHz) */ |
| unsigned char select_timeout; /* timeout (R5) */ |
| unsigned char sync_max_depth; /* Synchronous xfer max fifo depth */ |
| unsigned char wide_max_size; /* Maximum wide transfer size */ |
| unsigned char cntl3; /* Control Reg 3 */ |
| unsigned int asyncperiod; /* Async transfer period (ns) */ |
| unsigned int capabilities; /* driver capabilities */ |
| unsigned int disconnect_ok:1; /* Disconnects allowed? */ |
| } ifcfg; |
| |
| /* queue handling */ |
| struct { |
| Queue_t issue; /* issue queue */ |
| Queue_t disconnected; /* disconnected command queue */ |
| } queues; |
| |
| /* per-device info */ |
| struct fas216_device { |
| unsigned char disconnect_ok:1; /* device can disconnect */ |
| unsigned char parity_enabled:1; /* parity checking enabled */ |
| unsigned char parity_check:1; /* need to check parity checking */ |
| unsigned char period; /* sync xfer period in (*4ns) */ |
| unsigned char stp; /* synchronous transfer period */ |
| unsigned char sof; /* synchronous offset register */ |
| unsigned char wide_xfer; /* currently negociated wide transfer */ |
| neg_t sync_state; /* synchronous transfer mode */ |
| neg_t wide_state; /* wide transfer mode */ |
| } device[8]; |
| unsigned long busyluns[64/sizeof(unsigned long)];/* array of bits indicating LUNs busy */ |
| |
| /* dma */ |
| struct { |
| fasdmatype_t transfer_type; /* current type of DMA transfer */ |
| fasdmatype_t (*setup) (struct Scsi_Host *host, struct scsi_pointer *SCp, fasdmadir_t direction, fasdmatype_t min_dma); |
| void (*pseudo)(struct Scsi_Host *host, struct scsi_pointer *SCp, fasdmadir_t direction, int transfer); |
| void (*stop) (struct Scsi_Host *host, struct scsi_pointer *SCp); |
| } dma; |
| |
| /* miscellaneous */ |
| int internal_done; /* flag to indicate request done */ |
| unsigned long magic_end; |
| } FAS216_Info; |
| |
| /* Function: int fas216_init (struct Scsi_Host *instance) |
| * Purpose : initialise FAS/NCR/AMD SCSI structures. |
| * Params : instance - a driver-specific filled-out structure |
| * Returns : 0 on success |
| */ |
| extern int fas216_init (struct Scsi_Host *instance); |
| |
| /* Function: int fas216_add (struct Scsi_Host *instance, struct device *dev) |
| * Purpose : initialise FAS/NCR/AMD SCSI ic. |
| * Params : instance - a driver-specific filled-out structure |
| * Returns : 0 on success |
| */ |
| extern int fas216_add (struct Scsi_Host *instance, struct device *dev); |
| |
| /* Function: int fas216_queue_command(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) |
| * Purpose : queue a command for adapter to process. |
| * Params : SCpnt - Command to queue |
| * done - done function to call once command is complete |
| * Returns : 0 - success, else error |
| */ |
| extern int fas216_queue_command(struct scsi_cmnd *, |
| void (*done)(struct scsi_cmnd *)); |
| |
| /* Function: int fas216_noqueue_command(istruct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) |
| * Purpose : queue a command for adapter to process, and process it to completion. |
| * Params : SCpnt - Command to queue |
| * done - done function to call once command is complete |
| * Returns : 0 - success, else error |
| */ |
| extern int fas216_noqueue_command(struct scsi_cmnd *, |
| void (*done)(struct scsi_cmnd *)); |
| |
| /* Function: irqreturn_t fas216_intr (FAS216_Info *info) |
| * Purpose : handle interrupts from the interface to progress a command |
| * Params : info - interface to service |
| */ |
| extern irqreturn_t fas216_intr (FAS216_Info *info); |
| |
| extern void fas216_remove (struct Scsi_Host *instance); |
| |
| /* Function: void fas216_release (struct Scsi_Host *instance) |
| * Purpose : release all resources and put everything to bed for FAS/NCR/AMD SCSI ic. |
| * Params : instance - a driver-specific filled-out structure |
| * Returns : 0 on success |
| */ |
| extern void fas216_release (struct Scsi_Host *instance); |
| |
| extern int fas216_print_host(FAS216_Info *info, char *buffer); |
| extern int fas216_print_stats(FAS216_Info *info, char *buffer); |
| extern int fas216_print_devices(FAS216_Info *info, char *buffer); |
| |
| /* Function: int fas216_eh_abort(struct scsi_cmnd *SCpnt) |
| * Purpose : abort this command |
| * Params : SCpnt - command to abort |
| * Returns : FAILED if unable to abort |
| */ |
| extern int fas216_eh_abort(struct scsi_cmnd *SCpnt); |
| |
| /* Function: int fas216_eh_device_reset(struct scsi_cmnd *SCpnt) |
| * Purpose : Reset the device associated with this command |
| * Params : SCpnt - command specifing device to reset |
| * Returns : FAILED if unable to reset |
| */ |
| extern int fas216_eh_device_reset(struct scsi_cmnd *SCpnt); |
| |
| /* Function: int fas216_eh_bus_reset(struct scsi_cmnd *SCpnt) |
| * Purpose : Reset the complete bus associated with this command |
| * Params : SCpnt - command specifing bus to reset |
| * Returns : FAILED if unable to reset |
| */ |
| extern int fas216_eh_bus_reset(struct scsi_cmnd *SCpnt); |
| |
| /* Function: int fas216_eh_host_reset(struct scsi_cmnd *SCpnt) |
| * Purpose : Reset the host associated with this command |
| * Params : SCpnt - command specifing host to reset |
| * Returns : FAILED if unable to reset |
| */ |
| extern int fas216_eh_host_reset(struct scsi_cmnd *SCpnt); |
| |
| #endif /* FAS216_H */ |