| #ifndef _dmasound_h_ |
| /* |
| * linux/sound/oss/dmasound/dmasound.h |
| * |
| * |
| * Minor numbers for the sound driver. |
| * |
| * Unfortunately Creative called the codec chip of SB as a DSP. For this |
| * reason the /dev/dsp is reserved for digitized audio use. There is a |
| * device for true DSP processors but it will be called something else. |
| * In v3.0 it's /dev/sndproc but this could be a temporary solution. |
| */ |
| #define _dmasound_h_ |
| |
| #include <linux/types.h> |
| |
| #define SND_NDEVS 256 /* Number of supported devices */ |
| #define SND_DEV_CTL 0 /* Control port /dev/mixer */ |
| #define SND_DEV_SEQ 1 /* Sequencer output /dev/sequencer (FM |
| synthesizer and MIDI output) */ |
| #define SND_DEV_MIDIN 2 /* Raw midi access */ |
| #define SND_DEV_DSP 3 /* Digitized voice /dev/dsp */ |
| #define SND_DEV_AUDIO 4 /* Sparc compatible /dev/audio */ |
| #define SND_DEV_DSP16 5 /* Like /dev/dsp but 16 bits/sample */ |
| #define SND_DEV_STATUS 6 /* /dev/sndstat */ |
| /* #7 not in use now. Was in 2.4. Free for use after v3.0. */ |
| #define SND_DEV_SEQ2 8 /* /dev/sequencer, level 2 interface */ |
| #define SND_DEV_SNDPROC 9 /* /dev/sndproc for programmable devices */ |
| #define SND_DEV_PSS SND_DEV_SNDPROC |
| |
| /* switch on various prinks */ |
| #define DEBUG_DMASOUND 1 |
| |
| #define MAX_AUDIO_DEV 5 |
| #define MAX_MIXER_DEV 4 |
| #define MAX_SYNTH_DEV 3 |
| #define MAX_MIDI_DEV 6 |
| #define MAX_TIMER_DEV 3 |
| |
| #define MAX_CATCH_RADIUS 10 |
| |
| #define le2be16(x) (((x)<<8 & 0xff00) | ((x)>>8 & 0x00ff)) |
| #define le2be16dbl(x) (((x)<<8 & 0xff00ff00) | ((x)>>8 & 0x00ff00ff)) |
| |
| #define IOCTL_IN(arg, ret) \ |
| do { int error = get_user(ret, (int __user *)(arg)); \ |
| if (error) return error; \ |
| } while (0) |
| #define IOCTL_OUT(arg, ret) ioctl_return((int __user *)(arg), ret) |
| |
| static inline int ioctl_return(int __user *addr, int value) |
| { |
| return value < 0 ? value : put_user(value, addr); |
| } |
| |
| |
| /* |
| * Configuration |
| */ |
| |
| #undef HAS_8BIT_TABLES |
| |
| #if defined(CONFIG_DMASOUND_ATARI) || defined(CONFIG_DMASOUND_ATARI_MODULE) ||\ |
| defined(CONFIG_DMASOUND_PAULA) || defined(CONFIG_DMASOUND_PAULA_MODULE) ||\ |
| defined(CONFIG_DMASOUND_Q40) || defined(CONFIG_DMASOUND_Q40_MODULE) |
| #define HAS_8BIT_TABLES |
| #define MIN_BUFFERS 4 |
| #define MIN_BUFSIZE (1<<12) /* in bytes (- where does this come from ?) */ |
| #define MIN_FRAG_SIZE 8 /* not 100% sure about this */ |
| #define MAX_BUFSIZE (1<<17) /* Limit for Amiga is 128 kb */ |
| #define MAX_FRAG_SIZE 15 /* allow *4 for mono-8 => stereo-16 (for multi) */ |
| |
| #else /* is pmac and multi is off */ |
| |
| #define MIN_BUFFERS 2 |
| #define MIN_BUFSIZE (1<<8) /* in bytes */ |
| #define MIN_FRAG_SIZE 8 |
| #define MAX_BUFSIZE (1<<18) /* this is somewhat arbitrary for pmac */ |
| #define MAX_FRAG_SIZE 16 /* need to allow *4 for mono-8 => stereo-16 */ |
| #endif |
| |
| #define DEFAULT_N_BUFFERS 4 |
| #define DEFAULT_BUFF_SIZE (1<<15) |
| |
| /* |
| * Initialization |
| */ |
| |
| extern int dmasound_init(void); |
| #ifdef MODULE |
| extern void dmasound_deinit(void); |
| #else |
| #define dmasound_deinit() do { } while (0) |
| #endif |
| |
| /* description of the set-up applies to either hard or soft settings */ |
| |
| typedef struct { |
| int format; /* AFMT_* */ |
| int stereo; /* 0 = mono, 1 = stereo */ |
| int size; /* 8/16 bit*/ |
| int speed; /* speed */ |
| } SETTINGS; |
| |
| /* |
| * Machine definitions |
| */ |
| |
| typedef struct { |
| const char *name; |
| const char *name2; |
| struct module *owner; |
| void *(*dma_alloc)(unsigned int, gfp_t); |
| void (*dma_free)(void *, unsigned int); |
| int (*irqinit)(void); |
| #ifdef MODULE |
| void (*irqcleanup)(void); |
| #endif |
| void (*init)(void); |
| void (*silence)(void); |
| int (*setFormat)(int); |
| int (*setVolume)(int); |
| int (*setBass)(int); |
| int (*setTreble)(int); |
| int (*setGain)(int); |
| void (*play)(void); |
| void (*record)(void); /* optional */ |
| void (*mixer_init)(void); /* optional */ |
| int (*mixer_ioctl)(u_int, u_long); /* optional */ |
| int (*write_sq_setup)(void); /* optional */ |
| int (*read_sq_setup)(void); /* optional */ |
| int (*sq_open)(mode_t); /* optional */ |
| int (*state_info)(char *, size_t); /* optional */ |
| void (*abort_read)(void); /* optional */ |
| int min_dsp_speed; |
| int max_dsp_speed; |
| int version ; |
| int hardware_afmts ; /* OSS says we only return h'ware info */ |
| /* when queried via SNDCTL_DSP_GETFMTS */ |
| int capabilities ; /* low-level reply to SNDCTL_DSP_GETCAPS */ |
| SETTINGS default_hard ; /* open() or init() should set something valid */ |
| SETTINGS default_soft ; /* you can make it look like old OSS, if you want to */ |
| } MACHINE; |
| |
| /* |
| * Low level stuff |
| */ |
| |
| typedef struct { |
| ssize_t (*ct_ulaw)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t); |
| ssize_t (*ct_alaw)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t); |
| ssize_t (*ct_s8)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t); |
| ssize_t (*ct_u8)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t); |
| ssize_t (*ct_s16be)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t); |
| ssize_t (*ct_u16be)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t); |
| ssize_t (*ct_s16le)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t); |
| ssize_t (*ct_u16le)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t); |
| } TRANS; |
| |
| struct sound_settings { |
| MACHINE mach; /* machine dependent things */ |
| SETTINGS hard; /* hardware settings */ |
| SETTINGS soft; /* software settings */ |
| SETTINGS dsp; /* /dev/dsp default settings */ |
| TRANS *trans_write; /* supported translations */ |
| int volume_left; /* volume (range is machine dependent) */ |
| int volume_right; |
| int bass; /* tone (range is machine dependent) */ |
| int treble; |
| int gain; |
| int minDev; /* minor device number currently open */ |
| spinlock_t lock; |
| }; |
| |
| extern struct sound_settings dmasound; |
| |
| #ifdef HAS_8BIT_TABLES |
| extern char dmasound_ulaw2dma8[]; |
| extern char dmasound_alaw2dma8[]; |
| #endif |
| |
| /* |
| * Mid level stuff |
| */ |
| |
| static inline int dmasound_set_volume(int volume) |
| { |
| return dmasound.mach.setVolume(volume); |
| } |
| |
| static inline int dmasound_set_bass(int bass) |
| { |
| return dmasound.mach.setBass ? dmasound.mach.setBass(bass) : 50; |
| } |
| |
| static inline int dmasound_set_treble(int treble) |
| { |
| return dmasound.mach.setTreble ? dmasound.mach.setTreble(treble) : 50; |
| } |
| |
| static inline int dmasound_set_gain(int gain) |
| { |
| return dmasound.mach.setGain ? dmasound.mach.setGain(gain) : 100; |
| } |
| |
| |
| /* |
| * Sound queue stuff, the heart of the driver |
| */ |
| |
| struct sound_queue { |
| /* buffers allocated for this queue */ |
| int numBufs; /* real limits on what the user can have */ |
| int bufSize; /* in bytes */ |
| char **buffers; |
| |
| /* current parameters */ |
| int locked ; /* params cannot be modified when != 0 */ |
| int user_frags ; /* user requests this many */ |
| int user_frag_size ; /* of this size */ |
| int max_count; /* actual # fragments <= numBufs */ |
| int block_size; /* internal block size in bytes */ |
| int max_active; /* in-use fragments <= max_count */ |
| |
| /* it shouldn't be necessary to declare any of these volatile */ |
| int front, rear, count; |
| int rear_size; |
| /* |
| * The use of the playing field depends on the hardware |
| * |
| * Atari, PMac: The number of frames that are loaded/playing |
| * |
| * Amiga: Bit 0 is set: a frame is loaded |
| * Bit 1 is set: a frame is playing |
| */ |
| int active; |
| wait_queue_head_t action_queue, open_queue, sync_queue; |
| int open_mode; |
| int busy, syncing, xruns, died; |
| }; |
| |
| #define SLEEP(queue) interruptible_sleep_on_timeout(&queue, HZ) |
| #define WAKE_UP(queue) (wake_up_interruptible(&queue)) |
| |
| extern struct sound_queue dmasound_write_sq; |
| #define write_sq dmasound_write_sq |
| |
| extern int dmasound_catchRadius; |
| #define catchRadius dmasound_catchRadius |
| |
| /* define the value to be put in the byte-swap reg in mac-io |
| when we want it to swap for us. |
| */ |
| #define BS_VAL 1 |
| |
| #define SW_INPUT_VOLUME_SCALE 4 |
| #define SW_INPUT_VOLUME_DEFAULT (128 / SW_INPUT_VOLUME_SCALE) |
| |
| extern int expand_read_bal; /* Balance factor for reading */ |
| extern uint software_input_volume; /* software implemented recording volume! */ |
| |
| #endif /* _dmasound_h_ */ |