extcon: max77693: Remove unnecessary goto statement to improve readability
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
index 597f33c..ad6e9a4 100644
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -224,16 +224,17 @@
MAX77693_MUIC_REG_CTRL3,
time << CONTROL3_ADCDBSET_SHIFT,
CONTROL3_ADCDBSET_MASK);
- if (ret)
+ if (ret) {
dev_err(info->dev, "failed to set ADC debounce time\n");
+ return -EAGAIN;
+ }
break;
default:
dev_err(info->dev, "invalid ADC debounce time\n");
- ret = -EINVAL;
- break;
+ return -EINVAL;
}
- return ret;
+ return 0;
};
/*
@@ -261,7 +262,7 @@
MAX77693_MUIC_REG_CTRL1, ctrl1, COMP_SW_MASK);
if (ret < 0) {
dev_err(info->dev, "failed to update MUIC register\n");
- goto out;
+ return -EAGAIN;
}
if (attached)
@@ -274,14 +275,14 @@
CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK);
if (ret < 0) {
dev_err(info->dev, "failed to update MUIC register\n");
- goto out;
+ return -EAGAIN;
}
dev_info(info->dev,
"CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n",
ctrl1, ctrl2, attached ? "attached" : "detached");
-out:
- return ret;
+
+ return 0;
}
/*
@@ -503,6 +504,10 @@
if (!attached)
extcon_set_cable_state(info->edev, "USB", false);
break;
+ default:
+ dev_err(info->dev, "failed to detect %s dock device\n",
+ attached ? "attached" : "detached");
+ return -EINVAL;
}
/* Dock-Car/Desk/Audio, PATH:AUDIO */
@@ -520,7 +525,6 @@
{
struct input_dev *dock = info->dock;
unsigned int code;
- int ret = 0;
switch (button_type) {
case MAX77693_MUIC_ADC_REMOTE_S3_BUTTON-1
@@ -550,14 +554,12 @@
dev_err(info->dev,
"failed to detect %s key (adc:0x%x)\n",
attached ? "pressed" : "released", button_type);
- ret = -EINVAL;
- goto out;
+ return -EINVAL;
}
input_event(dock, EV_KEY, code, attached);
input_sync(dock);
-out:
return 0;
}
@@ -576,14 +578,14 @@
/* USB_OTG, PATH: AP_USB */
ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached);
if (ret < 0)
- goto out;
+ return ret;
extcon_set_cable_state(info->edev, "USB-Host", attached);
break;
case MAX77693_MUIC_GND_AV_CABLE_LOAD:
/* Audio Video Cable with load, PATH:AUDIO */
ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached);
if (ret < 0)
- goto out;
+ return ret;
extcon_set_cable_state(info->edev,
"Audio-video-load", attached);
break;
@@ -593,14 +595,12 @@
extcon_set_cable_state(info->edev, "MHL", attached);
break;
default:
- dev_err(info->dev, "failed to detect %s accessory\n",
+ dev_err(info->dev, "failed to detect %s cable of gnd type\n",
attached ? "attached" : "detached");
- ret = -EINVAL;
- break;
+ return -EINVAL;
}
-out:
- return ret;
+ return 0;
}
static int max77693_muic_jig_handler(struct max77693_muic_info *info,
@@ -630,15 +630,19 @@
strcpy(cable_name, "JIG-UART-OFF");
path = CONTROL1_SW_UART;
break;
+ default:
+ dev_err(info->dev, "failed to detect %s jig cable\n",
+ attached ? "attached" : "detached");
+ return -EINVAL;
}
ret = max77693_muic_set_path(info, path, attached);
if (ret < 0)
- goto out;
+ return ret;
extcon_set_cable_state(info->edev, cable_name, attached);
-out:
- return ret;
+
+ return 0;
}
static int max77693_muic_adc_handler(struct max77693_muic_info *info)
@@ -668,7 +672,7 @@
/* JIG */
ret = max77693_muic_jig_handler(info, cable_type, attached);
if (ret < 0)
- goto out;
+ return ret;
break;
case MAX77693_MUIC_ADC_RESERVED_ACC_3: /* Dock-Smart */
case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON: /* Dock-Car */
@@ -685,7 +689,7 @@
*/
ret = max77693_muic_dock_handler(info, cable_type, attached);
if (ret < 0)
- goto out;
+ return ret;
break;
case MAX77693_MUIC_ADC_REMOTE_S3_BUTTON: /* DOCK_KEY_PREV */
case MAX77693_MUIC_ADC_REMOTE_S7_BUTTON: /* DOCK_KEY_NEXT */
@@ -710,7 +714,7 @@
ret = max77693_muic_dock_button_handler(info, button_type,
attached);
if (ret < 0)
- goto out;
+ return ret;
break;
case MAX77693_MUIC_ADC_SEND_END_BUTTON:
case MAX77693_MUIC_ADC_REMOTE_S1_BUTTON:
@@ -738,17 +742,15 @@
dev_info(info->dev,
"accessory is %s but it isn't used (adc:0x%x)\n",
attached ? "attached" : "detached", cable_type);
- goto out;
+ return -EAGAIN;
default:
dev_err(info->dev,
"failed to detect %s accessory (adc:0x%x)\n",
attached ? "attached" : "detached", cable_type);
- ret = -EINVAL;
- goto out;
+ return -EINVAL;
}
-out:
- return ret;
+ return 0;
}
static int max77693_muic_chg_handler(struct max77693_muic_info *info)
@@ -959,7 +961,8 @@
default:
dev_err(info->dev, "muic interrupt: irq %d occurred\n",
irq_type);
- break;
+ mutex_unlock(&info->mutex);
+ return;
}
if (ret < 0)
@@ -1007,21 +1010,27 @@
&attached);
if (attached && adc != MAX77693_MUIC_ADC_OPEN) {
ret = max77693_muic_adc_handler(info);
- if (ret < 0)
+ if (ret < 0) {
dev_err(info->dev, "Cannot detect accessory\n");
+ mutex_unlock(&info->mutex);
+ return ret;
+ }
}
chg_type = max77693_muic_get_cable_type(info, MAX77693_CABLE_GROUP_CHG,
&attached);
if (attached && chg_type != MAX77693_CHARGER_TYPE_NONE) {
ret = max77693_muic_chg_handler(info);
- if (ret < 0)
+ if (ret < 0) {
dev_err(info->dev, "Cannot detect charger accessory\n");
+ mutex_unlock(&info->mutex);
+ return ret;
+ }
}
mutex_unlock(&info->mutex);
- return ret;
+ return 0;
}
static void max77693_muic_detect_cable_wq(struct work_struct *work)