Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
"The lion share of this pull request are fixes for clk-related breakage
caused by other changes during this merge window. For some platforms
the fix was as simple as selecting HAVE_CLK, for others like the
Loongson 2 significant restructuring was required.
The remainder are changes required to get the Lantiq code to work
again."
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: Loongson 2: Sort out clock managment.
MIPS: Loongson 1: more clk support and add select HAVE_CLK
MIPS: txx9: Fix redefinition of clk_* by adding select HAVE_CLK
MIPS: BCM63xx: Fix redefinition of clk_* by adding select HAVE_CLK
MIPS: AR7: Fix redefinition of clk_* by adding select HAVE_CLK
MIPS: Lantiq: Platform specific CLK fixup
MIPS: Lantiq: Add device_tree_init function
MIPS: Lantiq: Fix interface clock and PCI control register offset
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index e3efc06..331d574 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -77,6 +77,7 @@
select SYS_SUPPORTS_ZBOOT_UART16550
select ARCH_REQUIRE_GPIOLIB
select VLYNQ
+ select HAVE_CLK
help
Support for the Texas Instruments AR7 System-on-a-Chip
family: TNETD7100, 7200 and 7300.
@@ -124,6 +125,7 @@
select SYS_HAS_EARLY_PRINTK
select SWAP_IO_SPACE
select ARCH_REQUIRE_GPIOLIB
+ select HAVE_CLK
help
Support for BCM63XX based boards
diff --git a/arch/mips/include/asm/clock.h b/arch/mips/include/asm/clock.h
index 83894aa..c9456e7 100644
--- a/arch/mips/include/asm/clock.h
+++ b/arch/mips/include/asm/clock.h
@@ -50,15 +50,4 @@
int clk_register(struct clk *);
void clk_unregister(struct clk *);
-/* the exported API, in addition to clk_set_rate */
-/**
- * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter
- * @clk: clock source
- * @rate: desired clock rate in Hz
- * @algo_id: algorithm id to be passed down to ops->set_rate
- *
- * Returns success (0) or negative errno.
- */
-int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id);
-
#endif /* __ASM_MIPS_CLOCK_H */
diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h
index 06367c3..5222a00 100644
--- a/arch/mips/include/asm/mach-loongson/loongson.h
+++ b/arch/mips/include/asm/mach-loongson/loongson.h
@@ -245,7 +245,6 @@
#ifdef CONFIG_CPU_SUPPORTS_CPUFREQ
#include <linux/cpufreq.h>
-extern void loongson2_cpu_wait(void);
extern struct cpufreq_frequency_table loongson2_clockmod_table[];
/* Chip Config */
diff --git a/arch/mips/kernel/cpufreq/Makefile b/arch/mips/kernel/cpufreq/Makefile
index c3479a43..05a5715 100644
--- a/arch/mips/kernel/cpufreq/Makefile
+++ b/arch/mips/kernel/cpufreq/Makefile
@@ -2,4 +2,4 @@
# Makefile for the Linux/MIPS cpufreq.
#
-obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o loongson2_clock.o
+obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o
diff --git a/arch/mips/kernel/cpufreq/loongson2_cpufreq.c b/arch/mips/kernel/cpufreq/loongson2_cpufreq.c
index ae5db20..e7c98e2 100644
--- a/arch/mips/kernel/cpufreq/loongson2_cpufreq.c
+++ b/arch/mips/kernel/cpufreq/loongson2_cpufreq.c
@@ -19,7 +19,7 @@
#include <asm/clock.h>
-#include <loongson.h>
+#include <asm/mach-loongson/loongson.h>
static uint nowait;
@@ -181,6 +181,25 @@
.id_table = platform_device_ids,
};
+/*
+ * This is the simple version of Loongson-2 wait, Maybe we need do this in
+ * interrupt disabled context.
+ */
+
+static DEFINE_SPINLOCK(loongson2_wait_lock);
+
+static void loongson2_cpu_wait(void)
+{
+ unsigned long flags;
+ u32 cpu_freq;
+
+ spin_lock_irqsave(&loongson2_wait_lock, flags);
+ cpu_freq = LOONGSON_CHIPCFG0;
+ LOONGSON_CHIPCFG0 &= ~0x7; /* Put CPU into wait mode */
+ LOONGSON_CHIPCFG0 = cpu_freq; /* Restore CPU state */
+ spin_unlock_irqrestore(&loongson2_wait_lock, flags);
+}
+
static int __init cpufreq_init(void)
{
int ret;
diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c
index d3bcc33..ce2f129 100644
--- a/arch/mips/lantiq/clk.c
+++ b/arch/mips/lantiq/clk.c
@@ -135,6 +135,11 @@
}
EXPORT_SYMBOL(clk_deactivate);
+struct clk *of_clk_get_from_provider(struct of_phandle_args *clkspec)
+{
+ return NULL;
+}
+
static inline u32 get_counter_resolution(void)
{
u32 res;
diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
index d185e84..6cfd611 100644
--- a/arch/mips/lantiq/prom.c
+++ b/arch/mips/lantiq/prom.c
@@ -8,7 +8,10 @@
#include <linux/export.h>
#include <linux/clk.h>
+#include <linux/bootmem.h>
#include <linux/of_platform.h>
+#include <linux/of_fdt.h>
+
#include <asm/bootinfo.h>
#include <asm/time.h>
@@ -70,6 +73,25 @@
__dt_setup_arch(&__dtb_start);
}
+void __init device_tree_init(void)
+{
+ unsigned long base, size;
+
+ if (!initial_boot_params)
+ return;
+
+ base = virt_to_phys((void *)initial_boot_params);
+ size = be32_to_cpu(initial_boot_params->totalsize);
+
+ /* Before we do anything, lets reserve the dt blob */
+ reserve_bootmem(base, size, BOOTMEM_DEFAULT);
+
+ unflatten_device_tree();
+
+ /* free the space reserved for the dt blob */
+ free_bootmem(base, size);
+}
+
void __init prom_init(void)
{
/* call the soc specific detetcion code and get it to fill soc_info */
diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
index 83780f7..befbb76 100644
--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
@@ -20,10 +20,12 @@
/* clock control register */
#define CGU_IFCCR 0x0018
+#define CGU_IFCCR_VR9 0x0024
/* system clock register */
#define CGU_SYS 0x0010
/* pci control register */
#define CGU_PCICR 0x0034
+#define CGU_PCICR_VR9 0x0038
/* ephy configuration register */
#define CGU_EPHY 0x10
/* power control register */
@@ -80,6 +82,9 @@
void __iomem *ltq_cgu_membase;
void __iomem *ltq_ebu_membase;
+static u32 ifccr = CGU_IFCCR;
+static u32 pcicr = CGU_PCICR;
+
/* legacy function kept alive to ease clkdev transition */
void ltq_pmu_enable(unsigned int module)
{
@@ -103,14 +108,14 @@
/* enable a hw clock */
static int cgu_enable(struct clk *clk)
{
- ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) | clk->bits, CGU_IFCCR);
+ ltq_cgu_w32(ltq_cgu_r32(ifccr) | clk->bits, ifccr);
return 0;
}
/* disable a hw clock */
static void cgu_disable(struct clk *clk)
{
- ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) & ~clk->bits, CGU_IFCCR);
+ ltq_cgu_w32(ltq_cgu_r32(ifccr) & ~clk->bits, ifccr);
}
/* enable a clock gate */
@@ -138,22 +143,22 @@
/* the pci enable helper */
static int pci_enable(struct clk *clk)
{
- unsigned int ifccr = ltq_cgu_r32(CGU_IFCCR);
+ unsigned int val = ltq_cgu_r32(ifccr);
/* set bus clock speed */
if (of_machine_is_compatible("lantiq,ar9")) {
- ifccr &= ~0x1f00000;
+ val &= ~0x1f00000;
if (clk->rate == CLOCK_33M)
- ifccr |= 0xe00000;
+ val |= 0xe00000;
else
- ifccr |= 0x700000; /* 62.5M */
+ val |= 0x700000; /* 62.5M */
} else {
- ifccr &= ~0xf00000;
+ val &= ~0xf00000;
if (clk->rate == CLOCK_33M)
- ifccr |= 0x800000;
+ val |= 0x800000;
else
- ifccr |= 0x400000; /* 62.5M */
+ val |= 0x400000; /* 62.5M */
}
- ltq_cgu_w32(ifccr, CGU_IFCCR);
+ ltq_cgu_w32(val, ifccr);
pmu_enable(clk);
return 0;
}
@@ -161,18 +166,16 @@
/* enable the external clock as a source */
static int pci_ext_enable(struct clk *clk)
{
- ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) & ~(1 << 16),
- CGU_IFCCR);
- ltq_cgu_w32((1 << 30), CGU_PCICR);
+ ltq_cgu_w32(ltq_cgu_r32(ifccr) & ~(1 << 16), ifccr);
+ ltq_cgu_w32((1 << 30), pcicr);
return 0;
}
/* disable the external clock as a source */
static void pci_ext_disable(struct clk *clk)
{
- ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) | (1 << 16),
- CGU_IFCCR);
- ltq_cgu_w32((1 << 31) | (1 << 30), CGU_PCICR);
+ ltq_cgu_w32(ltq_cgu_r32(ifccr) | (1 << 16), ifccr);
+ ltq_cgu_w32((1 << 31) | (1 << 30), pcicr);
}
/* enable a clockout source */
@@ -184,11 +187,11 @@
for (i = 0; i < 4; i++) {
if (clk->rates[i] == clk->rate) {
int shift = 14 - (2 * clk->module);
- unsigned int ifccr = ltq_cgu_r32(CGU_IFCCR);
+ unsigned int val = ltq_cgu_r32(ifccr);
- ifccr &= ~(3 << shift);
- ifccr |= i << shift;
- ltq_cgu_w32(ifccr, CGU_IFCCR);
+ val &= ~(3 << shift);
+ val |= i << shift;
+ ltq_cgu_w32(val, ifccr);
return 0;
}
}
@@ -336,8 +339,12 @@
clkdev_add_clkout();
/* add the soc dependent clocks */
- if (!of_machine_is_compatible("lantiq,vr9"))
+ if (of_machine_is_compatible("lantiq,vr9")) {
+ ifccr = CGU_IFCCR_VR9;
+ pcicr = CGU_PCICR_VR9;
+ } else {
clkdev_add_pmu("1e180000.etop", NULL, 0, PMU_PPE);
+ }
if (!of_machine_is_compatible("lantiq,ase")) {
clkdev_add_pmu("1e100c00.serial", NULL, 0, PMU_ASC1);
diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig
index aca93ee..263beb9 100644
--- a/arch/mips/loongson/Kconfig
+++ b/arch/mips/loongson/Kconfig
@@ -41,6 +41,7 @@
select CSRC_R4K if ! MIPS_EXTERNAL_TIMER
select DMA_NONCOHERENT
select GENERIC_ISA_DMA_SUPPORT_BROKEN
+ select HAVE_CLK
select HW_HAS_PCI
select I8259
select IRQ_CPU
diff --git a/arch/mips/loongson/lemote-2f/Makefile b/arch/mips/loongson/lemote-2f/Makefile
index 8699a53..4f9eaa3 100644
--- a/arch/mips/loongson/lemote-2f/Makefile
+++ b/arch/mips/loongson/lemote-2f/Makefile
@@ -2,7 +2,7 @@
# Makefile for lemote loongson2f family machines
#
-obj-y += machtype.o irq.o reset.o ec_kb3310b.o
+obj-y += clock.o machtype.o irq.o reset.o ec_kb3310b.o
#
# Suspend Support
diff --git a/arch/mips/kernel/cpufreq/loongson2_clock.c b/arch/mips/loongson/lemote-2f/clock.c
similarity index 75%
rename from arch/mips/kernel/cpufreq/loongson2_clock.c
rename to arch/mips/loongson/lemote-2f/clock.c
index 5426779..bc739d4 100644
--- a/arch/mips/kernel/cpufreq/loongson2_clock.c
+++ b/arch/mips/loongson/lemote-2f/clock.c
@@ -6,14 +6,17 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
-
-#include <linux/module.h>
+#include <linux/clk.h>
#include <linux/cpufreq.h>
-#include <linux/platform_device.h>
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
#include <asm/clock.h>
-
-#include <loongson.h>
+#include <asm/mach-loongson/loongson.h>
static LIST_HEAD(clock_list);
static DEFINE_SPINLOCK(clock_lock);
@@ -89,12 +92,6 @@
int clk_set_rate(struct clk *clk, unsigned long rate)
{
- return clk_set_rate_ex(clk, rate, 0);
-}
-EXPORT_SYMBOL_GPL(clk_set_rate);
-
-int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id)
-{
int ret = 0;
int regval;
int i;
@@ -103,7 +100,7 @@
unsigned long flags;
spin_lock_irqsave(&clock_lock, flags);
- ret = clk->ops->set_rate(clk, rate, algo_id);
+ ret = clk->ops->set_rate(clk, rate, 0);
spin_unlock_irqrestore(&clock_lock, flags);
}
@@ -129,7 +126,7 @@
return ret;
}
-EXPORT_SYMBOL_GPL(clk_set_rate_ex);
+EXPORT_SYMBOL_GPL(clk_set_rate);
long clk_round_rate(struct clk *clk, unsigned long rate)
{
@@ -146,26 +143,3 @@
return rate;
}
EXPORT_SYMBOL_GPL(clk_round_rate);
-
-/*
- * This is the simple version of Loongson-2 wait, Maybe we need do this in
- * interrupt disabled content
- */
-
-DEFINE_SPINLOCK(loongson2_wait_lock);
-void loongson2_cpu_wait(void)
-{
- u32 cpu_freq;
- unsigned long flags;
-
- spin_lock_irqsave(&loongson2_wait_lock, flags);
- cpu_freq = LOONGSON_CHIPCFG0;
- LOONGSON_CHIPCFG0 &= ~0x7; /* Put CPU into wait mode */
- LOONGSON_CHIPCFG0 = cpu_freq; /* Restore CPU state */
- spin_unlock_irqrestore(&loongson2_wait_lock, flags);
-}
-EXPORT_SYMBOL_GPL(loongson2_cpu_wait);
-
-MODULE_AUTHOR("Yanhua <yanh@lemote.com>");
-MODULE_DESCRIPTION("cpufreq driver for Loongson 2F");
-MODULE_LICENSE("GPL");
diff --git a/arch/mips/loongson1/Kconfig b/arch/mips/loongson1/Kconfig
index 237fa21..a9a14d6 100644
--- a/arch/mips/loongson1/Kconfig
+++ b/arch/mips/loongson1/Kconfig
@@ -15,6 +15,7 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_HIGHMEM
select SYS_HAS_EARLY_PRINTK
+ select HAVE_CLK
endchoice
diff --git a/arch/mips/loongson1/common/clock.c b/arch/mips/loongson1/common/clock.c
index 2d98fb0..1bbbbec 100644
--- a/arch/mips/loongson1/common/clock.c
+++ b/arch/mips/loongson1/common/clock.c
@@ -38,12 +38,28 @@
}
EXPORT_SYMBOL(clk_get);
+int clk_enable(struct clk *clk)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
unsigned long clk_get_rate(struct clk *clk)
{
return clk->rate;
}
EXPORT_SYMBOL(clk_get_rate);
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
static void pll_clk_init(struct clk *clk)
{
u32 pll;
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index 852ae4b..6d40bc7 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -20,6 +20,7 @@
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_BIG_ENDIAN
+ select HAVE_CLK
config TOSHIBA_JMR3927
bool "Toshiba JMR-TX3927 board"