| /* |
| * Copyright (c) 2010 Broadcom Corporation |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY |
| * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION |
| * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN |
| * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/netdevice.h> |
| #include <linux/mmc/sdio.h> |
| #include <linux/mmc/core.h> |
| #include <linux/mmc/sdio_func.h> |
| #include <linux/mmc/sdio_ids.h> |
| #include <linux/mmc/card.h> |
| #include <linux/suspend.h> |
| #include <linux/errno.h> |
| #include <linux/sched.h> /* request_irq() */ |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/platform_data/brcmfmac-sdio.h> |
| #include <net/cfg80211.h> |
| |
| #include <defs.h> |
| #include <brcm_hw_ids.h> |
| #include <brcmu_utils.h> |
| #include <brcmu_wifi.h> |
| #include "sdio_host.h" |
| #include "dhd_dbg.h" |
| #include "dhd_bus.h" |
| |
| #define SDIO_VENDOR_ID_BROADCOM 0x02d0 |
| |
| #define DMA_ALIGN_MASK 0x03 |
| |
| #define SDIO_DEVICE_ID_BROADCOM_43143 43143 |
| #define SDIO_DEVICE_ID_BROADCOM_43241 0x4324 |
| #define SDIO_DEVICE_ID_BROADCOM_4329 0x4329 |
| #define SDIO_DEVICE_ID_BROADCOM_4330 0x4330 |
| #define SDIO_DEVICE_ID_BROADCOM_4334 0x4334 |
| #define SDIO_DEVICE_ID_BROADCOM_4335 0x4335 |
| |
| #define SDIO_FUNC1_BLOCKSIZE 64 |
| #define SDIO_FUNC2_BLOCKSIZE 512 |
| |
| /* devices we support, null terminated */ |
| static const struct sdio_device_id brcmf_sdmmc_ids[] = { |
| {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43143)}, |
| {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43241)}, |
| {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4329)}, |
| {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4330)}, |
| {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4334)}, |
| {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4335)}, |
| { /* end: all zeroes */ }, |
| }; |
| MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids); |
| |
| static struct brcmfmac_sdio_platform_data *brcmfmac_sdio_pdata; |
| |
| |
| static bool |
| brcmf_pm_resume_error(struct brcmf_sdio_dev *sdiodev) |
| { |
| bool is_err = false; |
| #ifdef CONFIG_PM_SLEEP |
| is_err = atomic_read(&sdiodev->suspend); |
| #endif |
| return is_err; |
| } |
| |
| static void |
| brcmf_pm_resume_wait(struct brcmf_sdio_dev *sdiodev, wait_queue_head_t *wq) |
| { |
| #ifdef CONFIG_PM_SLEEP |
| int retry = 0; |
| while (atomic_read(&sdiodev->suspend) && retry++ != 30) |
| wait_event_timeout(*wq, false, HZ/100); |
| #endif |
| } |
| |
| static inline int brcmf_sdioh_f0_write_byte(struct brcmf_sdio_dev *sdiodev, |
| uint regaddr, u8 *byte) |
| { |
| struct sdio_func *sdfunc = sdiodev->func[0]; |
| int err_ret; |
| |
| /* |
| * Can only directly write to some F0 registers. |
| * Handle F2 enable/disable and Abort command |
| * as a special case. |
| */ |
| if (regaddr == SDIO_CCCR_IOEx) { |
| sdfunc = sdiodev->func[2]; |
| if (sdfunc) { |
| if (*byte & SDIO_FUNC_ENABLE_2) { |
| /* Enable Function 2 */ |
| err_ret = sdio_enable_func(sdfunc); |
| if (err_ret) |
| brcmf_err("enable F2 failed:%d\n", |
| err_ret); |
| } else { |
| /* Disable Function 2 */ |
| err_ret = sdio_disable_func(sdfunc); |
| if (err_ret) |
| brcmf_err("Disable F2 failed:%d\n", |
| err_ret); |
| } |
| } |
| } else if ((regaddr == SDIO_CCCR_ABORT) || |
| (regaddr == SDIO_CCCR_IENx)) { |
| sdfunc = kmemdup(sdiodev->func[0], sizeof(struct sdio_func), |
| GFP_KERNEL); |
| if (!sdfunc) |
| return -ENOMEM; |
| sdfunc->num = 0; |
| sdio_writeb(sdfunc, *byte, regaddr, &err_ret); |
| kfree(sdfunc); |
| } else if (regaddr < 0xF0) { |
| brcmf_err("F0 Wr:0x%02x: write disallowed\n", regaddr); |
| err_ret = -EPERM; |
| } else { |
| sdio_f0_writeb(sdfunc, *byte, regaddr, &err_ret); |
| } |
| |
| return err_ret; |
| } |
| |
| int brcmf_sdioh_request_byte(struct brcmf_sdio_dev *sdiodev, uint rw, uint func, |
| uint regaddr, u8 *byte) |
| { |
| int err_ret; |
| |
| brcmf_dbg(SDIO, "rw=%d, func=%d, addr=0x%05x\n", rw, func, regaddr); |
| |
| brcmf_pm_resume_wait(sdiodev, &sdiodev->request_byte_wait); |
| if (brcmf_pm_resume_error(sdiodev)) |
| return -EIO; |
| |
| if (rw && func == 0) { |
| /* handle F0 separately */ |
| err_ret = brcmf_sdioh_f0_write_byte(sdiodev, regaddr, byte); |
| } else { |
| if (rw) /* CMD52 Write */ |
| sdio_writeb(sdiodev->func[func], *byte, regaddr, |
| &err_ret); |
| else if (func == 0) { |
| *byte = sdio_f0_readb(sdiodev->func[func], regaddr, |
| &err_ret); |
| } else { |
| *byte = sdio_readb(sdiodev->func[func], regaddr, |
| &err_ret); |
| } |
| } |
| |
| if (err_ret) |
| brcmf_err("Failed to %s byte F%d:@0x%05x=%02x, Err: %d\n", |
| rw ? "write" : "read", func, regaddr, *byte, err_ret); |
| |
| return err_ret; |
| } |
| |
| int brcmf_sdioh_request_word(struct brcmf_sdio_dev *sdiodev, |
| uint rw, uint func, uint addr, u32 *word, |
| uint nbytes) |
| { |
| int err_ret = -EIO; |
| |
| if (func == 0) { |
| brcmf_err("Only CMD52 allowed to F0\n"); |
| return -EINVAL; |
| } |
| |
| brcmf_dbg(SDIO, "rw=%d, func=%d, addr=0x%05x, nbytes=%d\n", |
| rw, func, addr, nbytes); |
| |
| brcmf_pm_resume_wait(sdiodev, &sdiodev->request_word_wait); |
| if (brcmf_pm_resume_error(sdiodev)) |
| return -EIO; |
| |
| if (rw) { /* CMD52 Write */ |
| if (nbytes == 4) |
| sdio_writel(sdiodev->func[func], *word, addr, |
| &err_ret); |
| else if (nbytes == 2) |
| sdio_writew(sdiodev->func[func], (*word & 0xFFFF), |
| addr, &err_ret); |
| else |
| brcmf_err("Invalid nbytes: %d\n", nbytes); |
| } else { /* CMD52 Read */ |
| if (nbytes == 4) |
| *word = sdio_readl(sdiodev->func[func], addr, &err_ret); |
| else if (nbytes == 2) |
| *word = sdio_readw(sdiodev->func[func], addr, |
| &err_ret) & 0xFFFF; |
| else |
| brcmf_err("Invalid nbytes: %d\n", nbytes); |
| } |
| |
| if (err_ret) |
| brcmf_err("Failed to %s word, Err: 0x%08x\n", |
| rw ? "write" : "read", err_ret); |
| |
| return err_ret; |
| } |
| |
| /* precondition: host controller is claimed */ |
| static int |
| brcmf_sdioh_request_data(struct brcmf_sdio_dev *sdiodev, uint write, bool fifo, |
| uint func, uint addr, struct sk_buff *pkt, uint pktlen) |
| { |
| int err_ret = 0; |
| |
| if ((write) && (!fifo)) { |
| err_ret = sdio_memcpy_toio(sdiodev->func[func], addr, |
| ((u8 *) (pkt->data)), pktlen); |
| } else if (write) { |
| err_ret = sdio_memcpy_toio(sdiodev->func[func], addr, |
| ((u8 *) (pkt->data)), pktlen); |
| } else if (fifo) { |
| err_ret = sdio_readsb(sdiodev->func[func], |
| ((u8 *) (pkt->data)), addr, pktlen); |
| } else { |
| err_ret = sdio_memcpy_fromio(sdiodev->func[func], |
| ((u8 *) (pkt->data)), |
| addr, pktlen); |
| } |
| |
| return err_ret; |
| } |
| |
| /* |
| * This function takes a queue of packets. The packets on the queue |
| * are assumed to be properly aligned by the caller. |
| */ |
| int |
| brcmf_sdioh_request_chain(struct brcmf_sdio_dev *sdiodev, uint fix_inc, |
| uint write, uint func, uint addr, |
| struct sk_buff_head *pktq) |
| { |
| bool fifo = (fix_inc == SDIOH_DATA_FIX); |
| u32 SGCount = 0; |
| int err_ret = 0; |
| |
| struct sk_buff *pkt; |
| |
| brcmf_dbg(SDIO, "Enter\n"); |
| |
| brcmf_pm_resume_wait(sdiodev, &sdiodev->request_chain_wait); |
| if (brcmf_pm_resume_error(sdiodev)) |
| return -EIO; |
| |
| skb_queue_walk(pktq, pkt) { |
| uint pkt_len = pkt->len; |
| pkt_len += 3; |
| pkt_len &= 0xFFFFFFFC; |
| |
| err_ret = brcmf_sdioh_request_data(sdiodev, write, fifo, func, |
| addr, pkt, pkt_len); |
| if (err_ret) { |
| brcmf_err("%s FAILED %p[%d], addr=0x%05x, pkt_len=%d, ERR=0x%08x\n", |
| write ? "TX" : "RX", pkt, SGCount, addr, |
| pkt_len, err_ret); |
| } else { |
| brcmf_dbg(SDIO, "%s xfr'd %p[%d], addr=0x%05x, len=%d\n", |
| write ? "TX" : "RX", pkt, SGCount, addr, |
| pkt_len); |
| } |
| if (!fifo) |
| addr += pkt_len; |
| |
| SGCount++; |
| } |
| |
| brcmf_dbg(SDIO, "Exit\n"); |
| return err_ret; |
| } |
| |
| /* |
| * This function takes a single DMA-able packet. |
| */ |
| int brcmf_sdioh_request_buffer(struct brcmf_sdio_dev *sdiodev, |
| uint fix_inc, uint write, uint func, uint addr, |
| struct sk_buff *pkt) |
| { |
| int status; |
| uint pkt_len; |
| bool fifo = (fix_inc == SDIOH_DATA_FIX); |
| |
| brcmf_dbg(SDIO, "Enter\n"); |
| |
| if (pkt == NULL) |
| return -EINVAL; |
| pkt_len = pkt->len; |
| |
| brcmf_pm_resume_wait(sdiodev, &sdiodev->request_buffer_wait); |
| if (brcmf_pm_resume_error(sdiodev)) |
| return -EIO; |
| |
| pkt_len += 3; |
| pkt_len &= (uint)~3; |
| |
| status = brcmf_sdioh_request_data(sdiodev, write, fifo, func, |
| addr, pkt, pkt_len); |
| if (status) { |
| brcmf_err("%s FAILED %p, addr=0x%05x, pkt_len=%d, ERR=0x%08x\n", |
| write ? "TX" : "RX", pkt, addr, pkt_len, status); |
| } else { |
| brcmf_dbg(SDIO, "%s xfr'd %p, addr=0x%05x, len=%d\n", |
| write ? "TX" : "RX", pkt, addr, pkt_len); |
| } |
| |
| return status; |
| } |
| |
| static int brcmf_sdioh_get_cisaddr(struct brcmf_sdio_dev *sdiodev, u32 regaddr) |
| { |
| /* read 24 bits and return valid 17 bit addr */ |
| int i, ret; |
| u32 scratch, regdata; |
| __le32 scratch_le; |
| u8 *ptr = (u8 *)&scratch_le; |
| |
| for (i = 0; i < 3; i++) { |
| regdata = brcmf_sdio_regrl(sdiodev, regaddr, &ret); |
| if (ret != 0) |
| brcmf_err("Can't read!\n"); |
| |
| *ptr++ = (u8) regdata; |
| regaddr++; |
| } |
| |
| /* Only the lower 17-bits are valid */ |
| scratch = le32_to_cpu(scratch_le); |
| scratch &= 0x0001FFFF; |
| return scratch; |
| } |
| |
| static int brcmf_sdioh_enablefuncs(struct brcmf_sdio_dev *sdiodev) |
| { |
| int err_ret; |
| u32 fbraddr; |
| u8 func; |
| |
| brcmf_dbg(SDIO, "\n"); |
| |
| /* Get the Card's common CIS address */ |
| sdiodev->func_cis_ptr[0] = brcmf_sdioh_get_cisaddr(sdiodev, |
| SDIO_CCCR_CIS); |
| brcmf_dbg(SDIO, "Card's Common CIS Ptr = 0x%x\n", |
| sdiodev->func_cis_ptr[0]); |
| |
| /* Get the Card's function CIS (for each function) */ |
| for (fbraddr = SDIO_FBR_BASE(1), func = 1; |
| func <= sdiodev->num_funcs; func++, fbraddr += SDIOD_FBR_SIZE) { |
| sdiodev->func_cis_ptr[func] = |
| brcmf_sdioh_get_cisaddr(sdiodev, SDIO_FBR_CIS + fbraddr); |
| brcmf_dbg(SDIO, "Function %d CIS Ptr = 0x%x\n", |
| func, sdiodev->func_cis_ptr[func]); |
| } |
| |
| /* Enable Function 1 */ |
| err_ret = sdio_enable_func(sdiodev->func[1]); |
| if (err_ret) |
| brcmf_err("Failed to enable F1 Err: 0x%08x\n", err_ret); |
| |
| return false; |
| } |
| |
| /* |
| * Public entry points & extern's |
| */ |
| int brcmf_sdioh_attach(struct brcmf_sdio_dev *sdiodev) |
| { |
| int err_ret = 0; |
| |
| brcmf_dbg(SDIO, "\n"); |
| |
| sdiodev->num_funcs = 2; |
| |
| sdio_claim_host(sdiodev->func[1]); |
| |
| err_ret = sdio_set_block_size(sdiodev->func[1], SDIO_FUNC1_BLOCKSIZE); |
| if (err_ret) { |
| brcmf_err("Failed to set F1 blocksize\n"); |
| goto out; |
| } |
| |
| err_ret = sdio_set_block_size(sdiodev->func[2], SDIO_FUNC2_BLOCKSIZE); |
| if (err_ret) { |
| brcmf_err("Failed to set F2 blocksize\n"); |
| goto out; |
| } |
| |
| brcmf_sdioh_enablefuncs(sdiodev); |
| |
| out: |
| sdio_release_host(sdiodev->func[1]); |
| brcmf_dbg(SDIO, "Done\n"); |
| return err_ret; |
| } |
| |
| void brcmf_sdioh_detach(struct brcmf_sdio_dev *sdiodev) |
| { |
| brcmf_dbg(SDIO, "\n"); |
| |
| /* Disable Function 2 */ |
| sdio_claim_host(sdiodev->func[2]); |
| sdio_disable_func(sdiodev->func[2]); |
| sdio_release_host(sdiodev->func[2]); |
| |
| /* Disable Function 1 */ |
| sdio_claim_host(sdiodev->func[1]); |
| sdio_disable_func(sdiodev->func[1]); |
| sdio_release_host(sdiodev->func[1]); |
| |
| } |
| |
| static int brcmf_ops_sdio_probe(struct sdio_func *func, |
| const struct sdio_device_id *id) |
| { |
| int err; |
| struct brcmf_sdio_dev *sdiodev; |
| struct brcmf_bus *bus_if; |
| |
| brcmf_dbg(SDIO, "Enter\n"); |
| brcmf_dbg(SDIO, "Class=%x\n", func->class); |
| brcmf_dbg(SDIO, "sdio vendor ID: 0x%04x\n", func->vendor); |
| brcmf_dbg(SDIO, "sdio device ID: 0x%04x\n", func->device); |
| brcmf_dbg(SDIO, "Function#: %d\n", func->num); |
| |
| /* Consume func num 1 but dont do anything with it. */ |
| if (func->num == 1) |
| return 0; |
| |
| /* Ignore anything but func 2 */ |
| if (func->num != 2) |
| return -ENODEV; |
| |
| bus_if = kzalloc(sizeof(struct brcmf_bus), GFP_KERNEL); |
| if (!bus_if) |
| return -ENOMEM; |
| sdiodev = kzalloc(sizeof(struct brcmf_sdio_dev), GFP_KERNEL); |
| if (!sdiodev) { |
| kfree(bus_if); |
| return -ENOMEM; |
| } |
| |
| sdiodev->func[0] = func->card->sdio_func[0]; |
| sdiodev->func[1] = func->card->sdio_func[0]; |
| sdiodev->func[2] = func; |
| |
| sdiodev->bus_if = bus_if; |
| bus_if->bus_priv.sdio = sdiodev; |
| bus_if->align = BRCMF_SDALIGN; |
| dev_set_drvdata(&func->dev, bus_if); |
| dev_set_drvdata(&sdiodev->func[1]->dev, bus_if); |
| sdiodev->dev = &sdiodev->func[1]->dev; |
| sdiodev->pdata = brcmfmac_sdio_pdata; |
| |
| atomic_set(&sdiodev->suspend, false); |
| init_waitqueue_head(&sdiodev->request_byte_wait); |
| init_waitqueue_head(&sdiodev->request_word_wait); |
| init_waitqueue_head(&sdiodev->request_chain_wait); |
| init_waitqueue_head(&sdiodev->request_buffer_wait); |
| |
| brcmf_dbg(SDIO, "F2 found, calling brcmf_sdio_probe...\n"); |
| err = brcmf_sdio_probe(sdiodev); |
| if (err) { |
| brcmf_err("F2 error, probe failed %d...\n", err); |
| goto fail; |
| } |
| brcmf_dbg(SDIO, "F2 init completed...\n"); |
| return 0; |
| |
| fail: |
| dev_set_drvdata(&func->dev, NULL); |
| dev_set_drvdata(&sdiodev->func[1]->dev, NULL); |
| kfree(sdiodev); |
| kfree(bus_if); |
| return err; |
| } |
| |
| static void brcmf_ops_sdio_remove(struct sdio_func *func) |
| { |
| struct brcmf_bus *bus_if; |
| struct brcmf_sdio_dev *sdiodev; |
| |
| brcmf_dbg(SDIO, "Enter\n"); |
| brcmf_dbg(SDIO, "sdio vendor ID: 0x%04x\n", func->vendor); |
| brcmf_dbg(SDIO, "sdio device ID: 0x%04x\n", func->device); |
| brcmf_dbg(SDIO, "Function: %d\n", func->num); |
| |
| if (func->num != 1 && func->num != 2) |
| return; |
| |
| bus_if = dev_get_drvdata(&func->dev); |
| if (bus_if) { |
| sdiodev = bus_if->bus_priv.sdio; |
| brcmf_sdio_remove(sdiodev); |
| |
| dev_set_drvdata(&sdiodev->func[1]->dev, NULL); |
| dev_set_drvdata(&sdiodev->func[2]->dev, NULL); |
| |
| kfree(bus_if); |
| kfree(sdiodev); |
| } |
| |
| brcmf_dbg(SDIO, "Exit\n"); |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int brcmf_sdio_suspend(struct device *dev) |
| { |
| mmc_pm_flag_t sdio_flags; |
| struct brcmf_bus *bus_if = dev_get_drvdata(dev); |
| struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; |
| int ret = 0; |
| |
| brcmf_dbg(SDIO, "\n"); |
| |
| atomic_set(&sdiodev->suspend, true); |
| |
| sdio_flags = sdio_get_host_pm_caps(sdiodev->func[1]); |
| if (!(sdio_flags & MMC_PM_KEEP_POWER)) { |
| brcmf_err("Host can't keep power while suspended\n"); |
| return -EINVAL; |
| } |
| |
| ret = sdio_set_host_pm_flags(sdiodev->func[1], MMC_PM_KEEP_POWER); |
| if (ret) { |
| brcmf_err("Failed to set pm_flags\n"); |
| return ret; |
| } |
| |
| brcmf_sdio_wdtmr_enable(sdiodev, false); |
| |
| return ret; |
| } |
| |
| static int brcmf_sdio_resume(struct device *dev) |
| { |
| struct brcmf_bus *bus_if = dev_get_drvdata(dev); |
| struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; |
| |
| brcmf_sdio_wdtmr_enable(sdiodev, true); |
| atomic_set(&sdiodev->suspend, false); |
| return 0; |
| } |
| |
| static const struct dev_pm_ops brcmf_sdio_pm_ops = { |
| .suspend = brcmf_sdio_suspend, |
| .resume = brcmf_sdio_resume, |
| }; |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| static struct sdio_driver brcmf_sdmmc_driver = { |
| .probe = brcmf_ops_sdio_probe, |
| .remove = brcmf_ops_sdio_remove, |
| .name = BRCMFMAC_SDIO_PDATA_NAME, |
| .id_table = brcmf_sdmmc_ids, |
| #ifdef CONFIG_PM_SLEEP |
| .drv = { |
| .pm = &brcmf_sdio_pm_ops, |
| }, |
| #endif /* CONFIG_PM_SLEEP */ |
| }; |
| |
| static int brcmf_sdio_pd_probe(struct platform_device *pdev) |
| { |
| int ret; |
| |
| brcmf_dbg(SDIO, "Enter\n"); |
| |
| brcmfmac_sdio_pdata = pdev->dev.platform_data; |
| |
| if (brcmfmac_sdio_pdata->power_on) |
| brcmfmac_sdio_pdata->power_on(); |
| |
| ret = sdio_register_driver(&brcmf_sdmmc_driver); |
| if (ret) |
| brcmf_err("sdio_register_driver failed: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static int brcmf_sdio_pd_remove(struct platform_device *pdev) |
| { |
| brcmf_dbg(SDIO, "Enter\n"); |
| |
| if (brcmfmac_sdio_pdata->power_off) |
| brcmfmac_sdio_pdata->power_off(); |
| |
| sdio_unregister_driver(&brcmf_sdmmc_driver); |
| |
| return 0; |
| } |
| |
| static struct platform_driver brcmf_sdio_pd = { |
| .remove = brcmf_sdio_pd_remove, |
| .driver = { |
| .name = BRCMFMAC_SDIO_PDATA_NAME |
| } |
| }; |
| |
| void brcmf_sdio_exit(void) |
| { |
| brcmf_dbg(SDIO, "Enter\n"); |
| |
| if (brcmfmac_sdio_pdata) |
| platform_driver_unregister(&brcmf_sdio_pd); |
| else |
| sdio_unregister_driver(&brcmf_sdmmc_driver); |
| } |
| |
| void brcmf_sdio_init(void) |
| { |
| int ret; |
| |
| brcmf_dbg(SDIO, "Enter\n"); |
| |
| ret = platform_driver_probe(&brcmf_sdio_pd, brcmf_sdio_pd_probe); |
| if (ret == -ENODEV) { |
| brcmf_dbg(SDIO, "No platform data available, registering without.\n"); |
| ret = sdio_register_driver(&brcmf_sdmmc_driver); |
| } |
| |
| if (ret) |
| brcmf_err("driver registration failed: %d\n", ret); |
| } |