drm/i915: Parametrize VLV_DDL registers
The VLV/CHV DDL registers are uniform, and neatly enough the register
offsets are sane so we can easily unify them to a single set of defines
and just pass the pipe as the parameter to compute the register offset.
Note that we now fill out the drain latency for pipe C on CHV which we
didn't do before. The rest of the pipe C watermarks are still untouched
but that will be remedied later by adding a proper cherryview_update_wm()
function.
v2: Add a note about CHV pipe C changes (Paulo)
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index a87eb18..fbdb08f 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3999,47 +3999,19 @@
/* drain latency register values*/
#define DRAIN_LATENCY_PRECISION_32 32
#define DRAIN_LATENCY_PRECISION_64 64
-#define VLV_DDL1 (VLV_DISPLAY_BASE + 0x70050)
-#define DDL_CURSORA_PRECISION_64 (1<<31)
-#define DDL_CURSORA_PRECISION_32 (0<<31)
-#define DDL_CURSORA_SHIFT 24
-#define DDL_SPRITEB_PRECISION_64 (1<<23)
-#define DDL_SPRITEB_PRECISION_32 (0<<23)
-#define DDL_SPRITEB_SHIFT 16
-#define DDL_SPRITEA_PRECISION_64 (1<<15)
-#define DDL_SPRITEA_PRECISION_32 (0<<15)
-#define DDL_SPRITEA_SHIFT 8
-#define DDL_PLANEA_PRECISION_64 (1<<7)
-#define DDL_PLANEA_PRECISION_32 (0<<7)
-#define DDL_PLANEA_SHIFT 0
-
-#define VLV_DDL2 (VLV_DISPLAY_BASE + 0x70054)
-#define DDL_CURSORB_PRECISION_64 (1<<31)
-#define DDL_CURSORB_PRECISION_32 (0<<31)
-#define DDL_CURSORB_SHIFT 24
-#define DDL_SPRITED_PRECISION_64 (1<<23)
-#define DDL_SPRITED_PRECISION_32 (0<<23)
-#define DDL_SPRITED_SHIFT 16
-#define DDL_SPRITEC_PRECISION_64 (1<<15)
-#define DDL_SPRITEC_PRECISION_32 (0<<15)
-#define DDL_SPRITEC_SHIFT 8
-#define DDL_PLANEB_PRECISION_64 (1<<7)
-#define DDL_PLANEB_PRECISION_32 (0<<7)
-#define DDL_PLANEB_SHIFT 0
-
-#define VLV_DDL3 (VLV_DISPLAY_BASE + 0x70058)
-#define DDL_CURSORC_PRECISION_64 (1<<31)
-#define DDL_CURSORC_PRECISION_32 (0<<31)
-#define DDL_CURSORC_SHIFT 24
-#define DDL_SPRITEF_PRECISION_64 (1<<23)
-#define DDL_SPRITEF_PRECISION_32 (0<<23)
-#define DDL_SPRITEF_SHIFT 16
-#define DDL_SPRITEE_PRECISION_64 (1<<15)
-#define DDL_SPRITEE_PRECISION_32 (0<<15)
-#define DDL_SPRITEE_SHIFT 8
-#define DDL_PLANEC_PRECISION_64 (1<<7)
-#define DDL_PLANEC_PRECISION_32 (0<<7)
-#define DDL_PLANEC_SHIFT 0
+#define VLV_DDL(pipe) (VLV_DISPLAY_BASE + 0x70050 + 4 * (pipe))
+#define DDL_CURSOR_PRECISION_64 (1<<31)
+#define DDL_CURSOR_PRECISION_32 (0<<31)
+#define DDL_CURSOR_SHIFT 24
+#define DDL_SPRITE1_PRECISION_64 (1<<23)
+#define DDL_SPRITE1_PRECISION_32 (0<<23)
+#define DDL_SPRITE1_SHIFT 16
+#define DDL_SPRITE0_PRECISION_64 (1<<15)
+#define DDL_SPRITE0_PRECISION_32 (0<<15)
+#define DDL_SPRITE0_SHIFT 8
+#define DDL_PLANE_PRECISION_64 (1<<7)
+#define DDL_PLANE_PRECISION_32 (0<<7)
+#define DDL_PLANE_SHIFT 0
/* FIFO watermark sizes etc */
#define G4X_FIFO_LINE_SIZE 64
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 0f9164d..2573c69 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -1313,35 +1313,29 @@
static void vlv_update_drain_latency(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- int planea_prec, planea_dl, planeb_prec, planeb_dl;
- int cursora_prec, cursora_dl, cursorb_prec, cursorb_dl;
- int plane_prec_mult, cursor_prec_mult; /* Precision multiplier is
- either 16 or 32 */
+ enum pipe pipe;
- /* For plane A, Cursor A */
- if (vlv_compute_drain_latency(dev, 0, &plane_prec_mult, &planea_dl,
- &cursor_prec_mult, &cursora_dl)) {
- cursora_prec = (cursor_prec_mult == DRAIN_LATENCY_PRECISION_32) ?
- DDL_CURSORA_PRECISION_32 : DDL_CURSORA_PRECISION_64;
- planea_prec = (plane_prec_mult == DRAIN_LATENCY_PRECISION_32) ?
- DDL_PLANEA_PRECISION_32 : DDL_PLANEA_PRECISION_64;
+ for_each_pipe(pipe) {
+ int plane_prec, plane_dl;
+ int cursor_prec, cursor_dl;
+ int plane_prec_mult, cursor_prec_mult;
- I915_WRITE(VLV_DDL1, cursora_prec |
- (cursora_dl << DDL_CURSORA_SHIFT) |
- planea_prec | planea_dl);
- }
+ if (!vlv_compute_drain_latency(dev, pipe, &plane_prec_mult, &plane_dl,
+ &cursor_prec_mult, &cursor_dl))
+ continue;
- /* For plane B, Cursor B */
- if (vlv_compute_drain_latency(dev, 1, &plane_prec_mult, &planeb_dl,
- &cursor_prec_mult, &cursorb_dl)) {
- cursorb_prec = (cursor_prec_mult == DRAIN_LATENCY_PRECISION_32) ?
- DDL_CURSORB_PRECISION_32 : DDL_CURSORB_PRECISION_64;
- planeb_prec = (plane_prec_mult == DRAIN_LATENCY_PRECISION_32) ?
- DDL_PLANEB_PRECISION_32 : DDL_PLANEB_PRECISION_64;
+ /*
+ * FIXME CHV spec still lists 16 and 32 as the precision
+ * values. Need to figure out if spec is outdated or what.
+ */
+ cursor_prec = (cursor_prec_mult == DRAIN_LATENCY_PRECISION_64) ?
+ DDL_CURSOR_PRECISION_64 : DDL_CURSOR_PRECISION_32;
+ plane_prec = (plane_prec_mult == DRAIN_LATENCY_PRECISION_64) ?
+ DDL_PLANE_PRECISION_64 : DDL_PLANE_PRECISION_32;
- I915_WRITE(VLV_DDL2, cursorb_prec |
- (cursorb_dl << DDL_CURSORB_SHIFT) |
- planeb_prec | planeb_dl);
+ I915_WRITE(VLV_DDL(pipe), cursor_prec |
+ (cursor_dl << DDL_CURSOR_SHIFT) |
+ plane_prec | (plane_dl << DDL_PLANE_SHIFT));
}
}