drm/i915: use intel_crtc_control everywhere, v3.
Having a single path for everything makes it a lot easier to keep
crtc_state->active in sync with intel_crtc->active.
A crtc cannot be changed to active when not enabled, because it means
no mode is set and no connectors are connected.
This should also make intel_crtc->active match crtc_state->active.
Changes since v1:
- Reworded commit message, there's no intel_crtc_toggle.
Changes since v2:
- Change some callers of intel_crtc_control to intel_display_suspend.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 47d9854..aac252c 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -3630,12 +3630,18 @@
*/
if (crtc->config->cpu_transcoder == TRANSCODER_EDP &&
!crtc->config->pch_pfit.enabled) {
+ bool active = crtc->active;
+
+ if (active)
+ intel_crtc_control(&crtc->base, false);
+
crtc->config->pch_pfit.force_thru = true;
intel_display_power_get(dev_priv,
POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
- intel_crtc_reset(crtc);
+ if (active)
+ intel_crtc_control(&crtc->base, true);
}
drm_modeset_unlock_all(dev);
}
@@ -3654,12 +3660,18 @@
* routing.
*/
if (crtc->config->pch_pfit.force_thru) {
- crtc->config->pch_pfit.force_thru = false;
+ bool active = crtc->active;
- intel_crtc_reset(crtc);
+ if (active)
+ intel_crtc_control(&crtc->base, false);
+
+ crtc->config->pch_pfit.force_thru = false;
intel_display_power_put(dev_priv,
POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
+
+ if (active)
+ intel_crtc_control(&crtc->base, true);
}
drm_modeset_unlock_all(dev);
}
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index da7c886..aab75d3 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3175,19 +3175,6 @@
}
}
-void intel_crtc_reset(struct intel_crtc *crtc)
-{
- struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-
- if (!crtc->active)
- return;
-
- intel_crtc_disable_planes(&crtc->base);
- dev_priv->display.crtc_disable(&crtc->base);
- dev_priv->display.crtc_enable(&crtc->base);
- intel_crtc_enable_planes(&crtc->base);
-}
-
void intel_prepare_reset(struct drm_device *dev)
{
/* no reset support for gen2 */
@@ -3199,7 +3186,6 @@
return;
drm_modeset_lock_all(dev);
-
/*
* Disabling the crtcs gracefully seems nicer. Also the
* g33 docs say we should at least disable all the planes.
@@ -6305,26 +6291,29 @@
enum intel_display_power_domain domain;
unsigned long domains;
+ if (enable == intel_crtc->active)
+ return;
+
+ if (enable && !crtc->state->enable)
+ return;
+
+ crtc->state->active = enable;
if (enable) {
- if (!intel_crtc->active) {
- domains = get_crtc_power_domains(crtc);
- for_each_power_domain(domain, domains)
- intel_display_power_get(dev_priv, domain);
- intel_crtc->enabled_power_domains = domains;
+ domains = get_crtc_power_domains(crtc);
+ for_each_power_domain(domain, domains)
+ intel_display_power_get(dev_priv, domain);
+ intel_crtc->enabled_power_domains = domains;
- dev_priv->display.crtc_enable(crtc);
- intel_crtc_enable_planes(crtc);
- }
+ dev_priv->display.crtc_enable(crtc);
+ intel_crtc_enable_planes(crtc);
} else {
- if (intel_crtc->active) {
- intel_crtc_disable_planes(crtc);
- dev_priv->display.crtc_disable(crtc);
+ intel_crtc_disable_planes(crtc);
+ dev_priv->display.crtc_disable(crtc);
- domains = intel_crtc->enabled_power_domains;
- for_each_power_domain(domain, domains)
- intel_display_power_put(dev_priv, domain);
- intel_crtc->enabled_power_domains = 0;
- }
+ domains = intel_crtc->enabled_power_domains;
+ for_each_power_domain(domain, domains)
+ intel_display_power_put(dev_priv, domain);
+ intel_crtc->enabled_power_domains = 0;
}
}
@@ -6341,8 +6330,6 @@
enable |= intel_encoder->connectors_active;
intel_crtc_control(crtc, enable);
-
- crtc->state->active = enable;
}
void intel_encoder_destroy(struct drm_encoder *encoder)
@@ -15240,8 +15227,7 @@
plane = crtc->plane;
to_intel_plane_state(crtc->base.primary->state)->visible = true;
crtc->plane = !plane;
- intel_crtc_disable_planes(&crtc->base);
- dev_priv->display.crtc_disable(&crtc->base);
+ intel_crtc_control(&crtc->base, false);
crtc->plane = plane;
/* ... and break all links. */
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 31afeb0..ea1351f 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -995,7 +995,6 @@
void intel_crtc_restore_mode(struct drm_crtc *crtc);
void intel_display_suspend(struct drm_device *dev);
void intel_crtc_control(struct drm_crtc *crtc, bool enable);
-void intel_crtc_reset(struct intel_crtc *crtc);
void intel_crtc_update_dpms(struct drm_crtc *crtc);
void intel_encoder_destroy(struct drm_encoder *encoder);
int intel_connector_init(struct intel_connector *);