diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 5c0e5cc..c6b6175 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -153,10 +153,9 @@
 		  mobile SoCs in the Kona family of chips (e.g. bcm28155,
 		  bcm11351, etc...)
 
-	config DEBUG_BCM63XX
+	config DEBUG_BCM63XX_UART
 		bool "Kernel low-level debugging on BCM63XX UART"
 		depends on ARCH_BCM_63XX
-		select DEBUG_UART_BCM63XX
 
 	config DEBUG_BERLIN_UART
 		bool "Marvell Berlin SoC Debug UART"
@@ -1414,7 +1413,7 @@
 	default "debug/vf.S" if DEBUG_VF_UART
 	default "debug/vt8500.S" if DEBUG_VT8500_UART0
 	default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
-	default "debug/bcm63xx.S" if DEBUG_UART_BCM63XX
+	default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART
 	default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0
 	default "mach/debug-macro.S"
 
@@ -1428,10 +1427,6 @@
 		ARCH_IOP13XX || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || \
 		ARCH_RPC
 
-# Compatibility options for BCM63xx
-config DEBUG_UART_BCM63XX
-	def_bool ARCH_BCM_63XX
-
 config DEBUG_UART_PHYS
 	hex "Physical base address of debug UART"
 	default 0x00100a00 if DEBUG_NETX_UART
@@ -1529,7 +1524,7 @@
 	default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
 	default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
 	default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
-	default 0xfffe8600 if DEBUG_UART_BCM63XX
+	default 0xfffe8600 if DEBUG_BCM63XX_UART
 	default 0xfffff700 if ARCH_IOP33X
 	depends on ARCH_EP93XX || \
 	        DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
@@ -1542,7 +1537,7 @@
 		DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
 		DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
 		DEBUG_S3C64XX_UART || \
-		DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
+		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
 		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
 		DEBUG_AT91_UART
 
@@ -1588,7 +1583,7 @@
 	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
 	default 0xfc40ab00 if DEBUG_BRCMSTB_UART
 	default 0xfc705000 if DEBUG_ZTE_ZX
-	default 0xfcfe8600 if DEBUG_UART_BCM63XX
+	default 0xfcfe8600 if DEBUG_BCM63XX_UART
 	default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
 	default 0xfd012000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_MV78XX0
 	default 0xfd883000 if DEBUG_ALPINE_UART0
@@ -1638,7 +1633,7 @@
 		DEBUG_NETX_UART || \
 		DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
 		DEBUG_S3C64XX_UART || \
-		DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
+		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
 		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
 
 config DEBUG_UART_8250_SHIFT
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index 78a21f2..c548cab 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -180,7 +180,7 @@
 };
 
 &extal1_clk {
-	clock-frequency = <25000000>;
+	clock-frequency = <24000000>;
 };
 &extal2_clk {
 	clock-frequency = <48000000>;
diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile
index 8be6632..dae8d86 100644
--- a/arch/arm/mach-realview/Makefile
+++ b/arch/arm/mach-realview/Makefile
@@ -4,10 +4,9 @@
 ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
 	-I$(srctree)/arch/arm/plat-versatile/include
 
-
+obj-y					:= core.o
 obj-$(CONFIG_REALVIEW_DT)		+= realview-dt.o
 obj-$(CONFIG_SMP)			+= platsmp-dt.o
-obj-y					:= core.o
 
 ifdef CONFIG_ATAGS
 obj-$(CONFIG_MACH_REALVIEW_EB)		+= realview_eb.o
diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c
index 0ad66fa..5548a31 100644
--- a/drivers/soc/qcom/spm.c
+++ b/drivers/soc/qcom/spm.c
@@ -288,7 +288,7 @@
 	struct spm_driver_data *drv = NULL;
 	struct device_node *cpu_node, *saw_node;
 	int cpu;
-	bool found;
+	bool found = 0;
 
 	for_each_possible_cpu(cpu) {
 		cpu_node = of_cpu_device_node_get(cpu);