PCI: imx6: Use "u32", not "uint32_t"
Use "u32", not "uint32_t", for consistency. Use "tmp", not "temp", for
consistency within the driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <Richard.Zhu@freescale.com>
diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
index c93bcdf..776789f 100644
--- a/drivers/pci/host/pci-imx6.c
+++ b/drivers/pci/host/pci-imx6.c
@@ -354,7 +354,7 @@
static int imx6_pcie_wait_for_speed_change(struct pcie_port *pp)
{
- uint32_t tmp;
+ u32 tmp;
unsigned int retries;
for (retries = 0; retries < 200; retries++) {
@@ -379,7 +379,7 @@
static int imx6_pcie_start_link(struct pcie_port *pp)
{
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
- uint32_t tmp;
+ u32 tmp;
int ret;
/*
@@ -450,19 +450,19 @@
static void imx6_pcie_reset_phy(struct pcie_port *pp)
{
- uint32_t temp;
+ u32 tmp;
- pcie_phy_read(pp->dbi_base, PHY_RX_OVRD_IN_LO, &temp);
- temp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN |
- PHY_RX_OVRD_IN_LO_RX_PLL_EN);
- pcie_phy_write(pp->dbi_base, PHY_RX_OVRD_IN_LO, temp);
+ pcie_phy_read(pp->dbi_base, PHY_RX_OVRD_IN_LO, &tmp);
+ tmp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN |
+ PHY_RX_OVRD_IN_LO_RX_PLL_EN);
+ pcie_phy_write(pp->dbi_base, PHY_RX_OVRD_IN_LO, tmp);
usleep_range(2000, 3000);
- pcie_phy_read(pp->dbi_base, PHY_RX_OVRD_IN_LO, &temp);
- temp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN |
+ pcie_phy_read(pp->dbi_base, PHY_RX_OVRD_IN_LO, &tmp);
+ tmp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN |
PHY_RX_OVRD_IN_LO_RX_PLL_EN);
- pcie_phy_write(pp->dbi_base, PHY_RX_OVRD_IN_LO, temp);
+ pcie_phy_write(pp->dbi_base, PHY_RX_OVRD_IN_LO, tmp);
}
static int imx6_pcie_link_up(struct pcie_port *pp)