DRM/I915: Add enum hpd_pin to intel_encoder.
To clean up hotplug support we add a new enum to intel_encoder:
enum hpd_pin. It allows the encoder to request a hpd line but leave
the details which IRQ is responsible on which chipset generation
to i915_irq.c.
This way requesting hotplug support will become really simple on
the encoder/connector level.
Signed-off-by: Egbert Eich <eich@suse.de>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 7f6452b..cda598d 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -86,6 +86,19 @@
};
#define port_name(p) ((p) + 'A')
+enum hpd_pin {
+ HPD_NONE = 0,
+ HPD_PORT_A = HPD_NONE, /* PORT_A is internal */
+ HPD_TV = HPD_NONE, /* TV is known to be unreliable */
+ HPD_CRT,
+ HPD_SDVO_B,
+ HPD_SDVO_C,
+ HPD_PORT_B,
+ HPD_PORT_C,
+ HPD_PORT_D,
+ HPD_NUM_PINS
+};
+
#define I915_GEM_GPU_DOMAINS \
(I915_GEM_DOMAIN_RENDER | \
I915_GEM_DOMAIN_SAMPLER | \
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 32a3693..a4b3e4e 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -776,6 +776,8 @@
crt->base.disable = intel_disable_crt;
crt->base.enable = intel_enable_crt;
+ if (I915_HAS_HOTPLUG(dev))
+ crt->base.hpd_pin = HPD_CRT;
if (HAS_DDI(dev))
crt->base.get_hw_state = intel_ddi_get_hw_state;
else
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 2f2ec42..c7c5635 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2821,18 +2821,22 @@
/* Set up the DDC bus. */
switch (port) {
case PORT_A:
+ intel_encoder->hpd_pin = HPD_PORT_A;
name = "DPDDC-A";
break;
case PORT_B:
dev_priv->hotplug_supported_mask |= PORTB_HOTPLUG_INT_STATUS;
+ intel_encoder->hpd_pin = HPD_PORT_B;
name = "DPDDC-B";
break;
case PORT_C:
dev_priv->hotplug_supported_mask |= PORTC_HOTPLUG_INT_STATUS;
+ intel_encoder->hpd_pin = HPD_PORT_C;
name = "DPDDC-C";
break;
case PORT_D:
dev_priv->hotplug_supported_mask |= PORTD_HOTPLUG_INT_STATUS;
+ intel_encoder->hpd_pin = HPD_PORT_D;
name = "DPDDC-D";
break;
default:
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 276f665..54bc2ea 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -168,6 +168,7 @@
* it is connected to in the pipe parameter. */
bool (*get_hw_state)(struct intel_encoder *, enum pipe *pipe);
int crtc_mask;
+ enum hpd_pin hpd_pin;
};
struct intel_panel {
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 2474b1b..6d92aeb 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -988,17 +988,21 @@
switch (port) {
case PORT_B:
intel_hdmi->ddc_bus = GMBUS_PORT_DPB;
+ intel_encoder->hpd_pin = HPD_PORT_B;
dev_priv->hotplug_supported_mask |= PORTB_HOTPLUG_INT_STATUS;
break;
case PORT_C:
intel_hdmi->ddc_bus = GMBUS_PORT_DPC;
+ intel_encoder->hpd_pin = HPD_PORT_C;
dev_priv->hotplug_supported_mask |= PORTC_HOTPLUG_INT_STATUS;
break;
case PORT_D:
intel_hdmi->ddc_bus = GMBUS_PORT_DPD;
+ intel_encoder->hpd_pin = HPD_PORT_D;
dev_priv->hotplug_supported_mask |= PORTD_HOTPLUG_INT_STATUS;
break;
case PORT_A:
+ intel_encoder->hpd_pin = HPD_PORT_A;
/* Internal port only for eDP. */
default:
BUG();
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 678c47c..0ff557f 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -2779,6 +2779,9 @@
SDVOB_HOTPLUG_INT_STATUS_I915 : SDVOC_HOTPLUG_INT_STATUS_I915;
}
+ if (intel_sdvo->hotplug_active)
+ intel_encoder->hpd_pin = HPD_SDVO_B ? HPD_SDVO_B : HPD_SDVO_C;
+
drm_encoder_helper_add(&intel_encoder->base, &intel_sdvo_helper_funcs);
intel_encoder->disable = intel_disable_sdvo;