| /* |
| * drivers/base/power/sysfs.c - sysfs entries for device PM |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/string.h> |
| #include <linux/export.h> |
| #include <linux/pm_qos.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/atomic.h> |
| #include <linux/jiffies.h> |
| #include "power.h" |
| |
| /* |
| * control - Report/change current runtime PM setting of the device |
| * |
| * Runtime power management of a device can be blocked with the help of |
| * this attribute. All devices have one of the following two values for |
| * the power/control file: |
| * |
| * + "auto\n" to allow the device to be power managed at run time; |
| * + "on\n" to prevent the device from being power managed at run time; |
| * |
| * The default for all devices is "auto", which means that devices may be |
| * subject to automatic power management, depending on their drivers. |
| * Changing this attribute to "on" prevents the driver from power managing |
| * the device at run time. Doing that while the device is suspended causes |
| * it to be woken up. |
| * |
| * wakeup - Report/change current wakeup option for device |
| * |
| * Some devices support "wakeup" events, which are hardware signals |
| * used to activate devices from suspended or low power states. Such |
| * devices have one of three values for the sysfs power/wakeup file: |
| * |
| * + "enabled\n" to issue the events; |
| * + "disabled\n" not to do so; or |
| * + "\n" for temporary or permanent inability to issue wakeup. |
| * |
| * (For example, unconfigured USB devices can't issue wakeups.) |
| * |
| * Familiar examples of devices that can issue wakeup events include |
| * keyboards and mice (both PS2 and USB styles), power buttons, modems, |
| * "Wake-On-LAN" Ethernet links, GPIO lines, and more. Some events |
| * will wake the entire system from a suspend state; others may just |
| * wake up the device (if the system as a whole is already active). |
| * Some wakeup events use normal IRQ lines; other use special out |
| * of band signaling. |
| * |
| * It is the responsibility of device drivers to enable (or disable) |
| * wakeup signaling as part of changing device power states, respecting |
| * the policy choices provided through the driver model. |
| * |
| * Devices may not be able to generate wakeup events from all power |
| * states. Also, the events may be ignored in some configurations; |
| * for example, they might need help from other devices that aren't |
| * active, or which may have wakeup disabled. Some drivers rely on |
| * wakeup events internally (unless they are disabled), keeping |
| * their hardware in low power modes whenever they're unused. This |
| * saves runtime power, without requiring system-wide sleep states. |
| * |
| * async - Report/change current async suspend setting for the device |
| * |
| * Asynchronous suspend and resume of the device during system-wide power |
| * state transitions can be enabled by writing "enabled" to this file. |
| * Analogously, if "disabled" is written to this file, the device will be |
| * suspended and resumed synchronously. |
| * |
| * All devices have one of the following two values for power/async: |
| * |
| * + "enabled\n" to permit the asynchronous suspend/resume of the device; |
| * + "disabled\n" to forbid it; |
| * |
| * NOTE: It generally is unsafe to permit the asynchronous suspend/resume |
| * of a device unless it is certain that all of the PM dependencies of the |
| * device are known to the PM core. However, for some devices this |
| * attribute is set to "enabled" by bus type code or device drivers and in |
| * that cases it should be safe to leave the default value. |
| * |
| * autosuspend_delay_ms - Report/change a device's autosuspend_delay value |
| * |
| * Some drivers don't want to carry out a runtime suspend as soon as a |
| * device becomes idle; they want it always to remain idle for some period |
| * of time before suspending it. This period is the autosuspend_delay |
| * value (expressed in milliseconds) and it can be controlled by the user. |
| * If the value is negative then the device will never be runtime |
| * suspended. |
| * |
| * NOTE: The autosuspend_delay_ms attribute and the autosuspend_delay |
| * value are used only if the driver calls pm_runtime_use_autosuspend(). |
| * |
| * wakeup_count - Report the number of wakeup events related to the device |
| */ |
| |
| static const char enabled[] = "enabled"; |
| static const char disabled[] = "disabled"; |
| |
| const char power_group_name[] = "power"; |
| EXPORT_SYMBOL_GPL(power_group_name); |
| |
| #ifdef CONFIG_PM_RUNTIME |
| static const char ctrl_auto[] = "auto"; |
| static const char ctrl_on[] = "on"; |
| |
| static ssize_t control_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| return sprintf(buf, "%s\n", |
| dev->power.runtime_auto ? ctrl_auto : ctrl_on); |
| } |
| |
| static ssize_t control_store(struct device * dev, struct device_attribute *attr, |
| const char * buf, size_t n) |
| { |
| char *cp; |
| int len = n; |
| |
| cp = memchr(buf, '\n', n); |
| if (cp) |
| len = cp - buf; |
| device_lock(dev); |
| if (len == sizeof ctrl_auto - 1 && strncmp(buf, ctrl_auto, len) == 0) |
| pm_runtime_allow(dev); |
| else if (len == sizeof ctrl_on - 1 && strncmp(buf, ctrl_on, len) == 0) |
| pm_runtime_forbid(dev); |
| else |
| n = -EINVAL; |
| device_unlock(dev); |
| return n; |
| } |
| |
| static DEVICE_ATTR(control, 0644, control_show, control_store); |
| |
| static ssize_t rtpm_active_time_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| int ret; |
| spin_lock_irq(&dev->power.lock); |
| update_pm_runtime_accounting(dev); |
| ret = sprintf(buf, "%i\n", jiffies_to_msecs(dev->power.active_jiffies)); |
| spin_unlock_irq(&dev->power.lock); |
| return ret; |
| } |
| |
| static DEVICE_ATTR(runtime_active_time, 0444, rtpm_active_time_show, NULL); |
| |
| static ssize_t rtpm_suspended_time_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| int ret; |
| spin_lock_irq(&dev->power.lock); |
| update_pm_runtime_accounting(dev); |
| ret = sprintf(buf, "%i\n", |
| jiffies_to_msecs(dev->power.suspended_jiffies)); |
| spin_unlock_irq(&dev->power.lock); |
| return ret; |
| } |
| |
| static DEVICE_ATTR(runtime_suspended_time, 0444, rtpm_suspended_time_show, NULL); |
| |
| static ssize_t rtpm_status_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| const char *p; |
| |
| if (dev->power.runtime_error) { |
| p = "error\n"; |
| } else if (dev->power.disable_depth) { |
| p = "unsupported\n"; |
| } else { |
| switch (dev->power.runtime_status) { |
| case RPM_SUSPENDED: |
| p = "suspended\n"; |
| break; |
| case RPM_SUSPENDING: |
| p = "suspending\n"; |
| break; |
| case RPM_RESUMING: |
| p = "resuming\n"; |
| break; |
| case RPM_ACTIVE: |
| p = "active\n"; |
| break; |
| default: |
| return -EIO; |
| } |
| } |
| return sprintf(buf, p); |
| } |
| |
| static DEVICE_ATTR(runtime_status, 0444, rtpm_status_show, NULL); |
| |
| static ssize_t autosuspend_delay_ms_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| if (!dev->power.use_autosuspend) |
| return -EIO; |
| return sprintf(buf, "%d\n", dev->power.autosuspend_delay); |
| } |
| |
| static ssize_t autosuspend_delay_ms_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t n) |
| { |
| long delay; |
| |
| if (!dev->power.use_autosuspend) |
| return -EIO; |
| |
| if (strict_strtol(buf, 10, &delay) != 0 || delay != (int) delay) |
| return -EINVAL; |
| |
| device_lock(dev); |
| pm_runtime_set_autosuspend_delay(dev, delay); |
| device_unlock(dev); |
| return n; |
| } |
| |
| static DEVICE_ATTR(autosuspend_delay_ms, 0644, autosuspend_delay_ms_show, |
| autosuspend_delay_ms_store); |
| |
| static ssize_t pm_qos_latency_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return sprintf(buf, "%d\n", dev->power.pq_req->node.prio); |
| } |
| |
| static ssize_t pm_qos_latency_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t n) |
| { |
| s32 value; |
| int ret; |
| |
| if (kstrtos32(buf, 0, &value)) |
| return -EINVAL; |
| |
| if (value < 0) |
| return -EINVAL; |
| |
| ret = dev_pm_qos_update_request(dev->power.pq_req, value); |
| return ret < 0 ? ret : n; |
| } |
| |
| static DEVICE_ATTR(pm_qos_resume_latency_us, 0644, |
| pm_qos_latency_show, pm_qos_latency_store); |
| #endif /* CONFIG_PM_RUNTIME */ |
| |
| #ifdef CONFIG_PM_SLEEP |
| static ssize_t |
| wake_show(struct device * dev, struct device_attribute *attr, char * buf) |
| { |
| return sprintf(buf, "%s\n", device_can_wakeup(dev) |
| ? (device_may_wakeup(dev) ? enabled : disabled) |
| : ""); |
| } |
| |
| static ssize_t |
| wake_store(struct device * dev, struct device_attribute *attr, |
| const char * buf, size_t n) |
| { |
| char *cp; |
| int len = n; |
| |
| if (!device_can_wakeup(dev)) |
| return -EINVAL; |
| |
| cp = memchr(buf, '\n', n); |
| if (cp) |
| len = cp - buf; |
| if (len == sizeof enabled - 1 |
| && strncmp(buf, enabled, sizeof enabled - 1) == 0) |
| device_set_wakeup_enable(dev, 1); |
| else if (len == sizeof disabled - 1 |
| && strncmp(buf, disabled, sizeof disabled - 1) == 0) |
| device_set_wakeup_enable(dev, 0); |
| else |
| return -EINVAL; |
| return n; |
| } |
| |
| static DEVICE_ATTR(wakeup, 0644, wake_show, wake_store); |
| |
| static ssize_t wakeup_count_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| unsigned long count = 0; |
| bool enabled = false; |
| |
| spin_lock_irq(&dev->power.lock); |
| if (dev->power.wakeup) { |
| count = dev->power.wakeup->event_count; |
| enabled = true; |
| } |
| spin_unlock_irq(&dev->power.lock); |
| return enabled ? sprintf(buf, "%lu\n", count) : sprintf(buf, "\n"); |
| } |
| |
| static DEVICE_ATTR(wakeup_count, 0444, wakeup_count_show, NULL); |
| |
| static ssize_t wakeup_active_count_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| unsigned long count = 0; |
| bool enabled = false; |
| |
| spin_lock_irq(&dev->power.lock); |
| if (dev->power.wakeup) { |
| count = dev->power.wakeup->active_count; |
| enabled = true; |
| } |
| spin_unlock_irq(&dev->power.lock); |
| return enabled ? sprintf(buf, "%lu\n", count) : sprintf(buf, "\n"); |
| } |
| |
| static DEVICE_ATTR(wakeup_active_count, 0444, wakeup_active_count_show, NULL); |
| |
| static ssize_t wakeup_abort_count_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| unsigned long count = 0; |
| bool enabled = false; |
| |
| spin_lock_irq(&dev->power.lock); |
| if (dev->power.wakeup) { |
| count = dev->power.wakeup->wakeup_count; |
| enabled = true; |
| } |
| spin_unlock_irq(&dev->power.lock); |
| return enabled ? sprintf(buf, "%lu\n", count) : sprintf(buf, "\n"); |
| } |
| |
| static DEVICE_ATTR(wakeup_abort_count, 0444, wakeup_abort_count_show, NULL); |
| |
| static ssize_t wakeup_expire_count_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| unsigned long count = 0; |
| bool enabled = false; |
| |
| spin_lock_irq(&dev->power.lock); |
| if (dev->power.wakeup) { |
| count = dev->power.wakeup->expire_count; |
| enabled = true; |
| } |
| spin_unlock_irq(&dev->power.lock); |
| return enabled ? sprintf(buf, "%lu\n", count) : sprintf(buf, "\n"); |
| } |
| |
| static DEVICE_ATTR(wakeup_expire_count, 0444, wakeup_expire_count_show, NULL); |
| |
| static ssize_t wakeup_active_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| unsigned int active = 0; |
| bool enabled = false; |
| |
| spin_lock_irq(&dev->power.lock); |
| if (dev->power.wakeup) { |
| active = dev->power.wakeup->active; |
| enabled = true; |
| } |
| spin_unlock_irq(&dev->power.lock); |
| return enabled ? sprintf(buf, "%u\n", active) : sprintf(buf, "\n"); |
| } |
| |
| static DEVICE_ATTR(wakeup_active, 0444, wakeup_active_show, NULL); |
| |
| static ssize_t wakeup_total_time_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| s64 msec = 0; |
| bool enabled = false; |
| |
| spin_lock_irq(&dev->power.lock); |
| if (dev->power.wakeup) { |
| msec = ktime_to_ms(dev->power.wakeup->total_time); |
| enabled = true; |
| } |
| spin_unlock_irq(&dev->power.lock); |
| return enabled ? sprintf(buf, "%lld\n", msec) : sprintf(buf, "\n"); |
| } |
| |
| static DEVICE_ATTR(wakeup_total_time_ms, 0444, wakeup_total_time_show, NULL); |
| |
| static ssize_t wakeup_max_time_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| s64 msec = 0; |
| bool enabled = false; |
| |
| spin_lock_irq(&dev->power.lock); |
| if (dev->power.wakeup) { |
| msec = ktime_to_ms(dev->power.wakeup->max_time); |
| enabled = true; |
| } |
| spin_unlock_irq(&dev->power.lock); |
| return enabled ? sprintf(buf, "%lld\n", msec) : sprintf(buf, "\n"); |
| } |
| |
| static DEVICE_ATTR(wakeup_max_time_ms, 0444, wakeup_max_time_show, NULL); |
| |
| static ssize_t wakeup_last_time_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| s64 msec = 0; |
| bool enabled = false; |
| |
| spin_lock_irq(&dev->power.lock); |
| if (dev->power.wakeup) { |
| msec = ktime_to_ms(dev->power.wakeup->last_time); |
| enabled = true; |
| } |
| spin_unlock_irq(&dev->power.lock); |
| return enabled ? sprintf(buf, "%lld\n", msec) : sprintf(buf, "\n"); |
| } |
| |
| static DEVICE_ATTR(wakeup_last_time_ms, 0444, wakeup_last_time_show, NULL); |
| |
| #ifdef CONFIG_PM_AUTOSLEEP |
| static ssize_t wakeup_prevent_sleep_time_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| s64 msec = 0; |
| bool enabled = false; |
| |
| spin_lock_irq(&dev->power.lock); |
| if (dev->power.wakeup) { |
| msec = ktime_to_ms(dev->power.wakeup->prevent_sleep_time); |
| enabled = true; |
| } |
| spin_unlock_irq(&dev->power.lock); |
| return enabled ? sprintf(buf, "%lld\n", msec) : sprintf(buf, "\n"); |
| } |
| |
| static DEVICE_ATTR(wakeup_prevent_sleep_time_ms, 0444, |
| wakeup_prevent_sleep_time_show, NULL); |
| #endif /* CONFIG_PM_AUTOSLEEP */ |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| #ifdef CONFIG_PM_ADVANCED_DEBUG |
| #ifdef CONFIG_PM_RUNTIME |
| |
| static ssize_t rtpm_usagecount_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return sprintf(buf, "%d\n", atomic_read(&dev->power.usage_count)); |
| } |
| |
| static ssize_t rtpm_children_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return sprintf(buf, "%d\n", dev->power.ignore_children ? |
| 0 : atomic_read(&dev->power.child_count)); |
| } |
| |
| static ssize_t rtpm_enabled_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| if ((dev->power.disable_depth) && (dev->power.runtime_auto == false)) |
| return sprintf(buf, "disabled & forbidden\n"); |
| else if (dev->power.disable_depth) |
| return sprintf(buf, "disabled\n"); |
| else if (dev->power.runtime_auto == false) |
| return sprintf(buf, "forbidden\n"); |
| return sprintf(buf, "enabled\n"); |
| } |
| |
| static DEVICE_ATTR(runtime_usage, 0444, rtpm_usagecount_show, NULL); |
| static DEVICE_ATTR(runtime_active_kids, 0444, rtpm_children_show, NULL); |
| static DEVICE_ATTR(runtime_enabled, 0444, rtpm_enabled_show, NULL); |
| |
| #endif |
| |
| static ssize_t async_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| return sprintf(buf, "%s\n", |
| device_async_suspend_enabled(dev) ? enabled : disabled); |
| } |
| |
| static ssize_t async_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t n) |
| { |
| char *cp; |
| int len = n; |
| |
| cp = memchr(buf, '\n', n); |
| if (cp) |
| len = cp - buf; |
| if (len == sizeof enabled - 1 && strncmp(buf, enabled, len) == 0) |
| device_enable_async_suspend(dev); |
| else if (len == sizeof disabled - 1 && strncmp(buf, disabled, len) == 0) |
| device_disable_async_suspend(dev); |
| else |
| return -EINVAL; |
| return n; |
| } |
| |
| static DEVICE_ATTR(async, 0644, async_show, async_store); |
| #endif /* CONFIG_PM_ADVANCED_DEBUG */ |
| |
| static struct attribute *power_attrs[] = { |
| #ifdef CONFIG_PM_ADVANCED_DEBUG |
| #ifdef CONFIG_PM_SLEEP |
| &dev_attr_async.attr, |
| #endif |
| #ifdef CONFIG_PM_RUNTIME |
| &dev_attr_runtime_status.attr, |
| &dev_attr_runtime_usage.attr, |
| &dev_attr_runtime_active_kids.attr, |
| &dev_attr_runtime_enabled.attr, |
| #endif |
| #endif /* CONFIG_PM_ADVANCED_DEBUG */ |
| NULL, |
| }; |
| static struct attribute_group pm_attr_group = { |
| .name = power_group_name, |
| .attrs = power_attrs, |
| }; |
| |
| static struct attribute *wakeup_attrs[] = { |
| #ifdef CONFIG_PM_SLEEP |
| &dev_attr_wakeup.attr, |
| &dev_attr_wakeup_count.attr, |
| &dev_attr_wakeup_active_count.attr, |
| &dev_attr_wakeup_abort_count.attr, |
| &dev_attr_wakeup_expire_count.attr, |
| &dev_attr_wakeup_active.attr, |
| &dev_attr_wakeup_total_time_ms.attr, |
| &dev_attr_wakeup_max_time_ms.attr, |
| &dev_attr_wakeup_last_time_ms.attr, |
| #ifdef CONFIG_PM_AUTOSLEEP |
| &dev_attr_wakeup_prevent_sleep_time_ms.attr, |
| #endif |
| #endif |
| NULL, |
| }; |
| static struct attribute_group pm_wakeup_attr_group = { |
| .name = power_group_name, |
| .attrs = wakeup_attrs, |
| }; |
| |
| static struct attribute *runtime_attrs[] = { |
| #ifdef CONFIG_PM_RUNTIME |
| #ifndef CONFIG_PM_ADVANCED_DEBUG |
| &dev_attr_runtime_status.attr, |
| #endif |
| &dev_attr_control.attr, |
| &dev_attr_runtime_suspended_time.attr, |
| &dev_attr_runtime_active_time.attr, |
| &dev_attr_autosuspend_delay_ms.attr, |
| #endif /* CONFIG_PM_RUNTIME */ |
| NULL, |
| }; |
| static struct attribute_group pm_runtime_attr_group = { |
| .name = power_group_name, |
| .attrs = runtime_attrs, |
| }; |
| |
| static struct attribute *pm_qos_attrs[] = { |
| #ifdef CONFIG_PM_RUNTIME |
| &dev_attr_pm_qos_resume_latency_us.attr, |
| #endif /* CONFIG_PM_RUNTIME */ |
| NULL, |
| }; |
| static struct attribute_group pm_qos_attr_group = { |
| .name = power_group_name, |
| .attrs = pm_qos_attrs, |
| }; |
| |
| int dpm_sysfs_add(struct device *dev) |
| { |
| int rc; |
| |
| rc = sysfs_create_group(&dev->kobj, &pm_attr_group); |
| if (rc) |
| return rc; |
| |
| if (pm_runtime_callbacks_present(dev)) { |
| rc = sysfs_merge_group(&dev->kobj, &pm_runtime_attr_group); |
| if (rc) |
| goto err_out; |
| } |
| |
| if (device_can_wakeup(dev)) { |
| rc = sysfs_merge_group(&dev->kobj, &pm_wakeup_attr_group); |
| if (rc) { |
| if (pm_runtime_callbacks_present(dev)) |
| sysfs_unmerge_group(&dev->kobj, |
| &pm_runtime_attr_group); |
| goto err_out; |
| } |
| } |
| return 0; |
| |
| err_out: |
| sysfs_remove_group(&dev->kobj, &pm_attr_group); |
| return rc; |
| } |
| |
| int wakeup_sysfs_add(struct device *dev) |
| { |
| return sysfs_merge_group(&dev->kobj, &pm_wakeup_attr_group); |
| } |
| |
| void wakeup_sysfs_remove(struct device *dev) |
| { |
| sysfs_unmerge_group(&dev->kobj, &pm_wakeup_attr_group); |
| } |
| |
| int pm_qos_sysfs_add(struct device *dev) |
| { |
| return sysfs_merge_group(&dev->kobj, &pm_qos_attr_group); |
| } |
| |
| void pm_qos_sysfs_remove(struct device *dev) |
| { |
| sysfs_unmerge_group(&dev->kobj, &pm_qos_attr_group); |
| } |
| |
| void rpm_sysfs_remove(struct device *dev) |
| { |
| sysfs_unmerge_group(&dev->kobj, &pm_runtime_attr_group); |
| } |
| |
| void dpm_sysfs_remove(struct device *dev) |
| { |
| rpm_sysfs_remove(dev); |
| sysfs_unmerge_group(&dev->kobj, &pm_wakeup_attr_group); |
| sysfs_remove_group(&dev->kobj, &pm_attr_group); |
| } |