Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
new file mode 100644
index 0000000..5b670c9
--- /dev/null
+++ b/arch/arm/mm/Kconfig
@@ -0,0 +1,411 @@
+comment "Processor Type"
+
+config CPU_32
+ bool
+ default y
+
+# Select CPU types depending on the architecture selected. This selects
+# which CPUs we support in the kernel image, and the compiler instruction
+# optimiser behaviour.
+
+# ARM610
+config CPU_ARM610
+ bool "Support ARM610 processor"
+ depends on ARCH_RPC
+ select CPU_32v3
+ select CPU_CACHE_V3
+ select CPU_CACHE_VIVT
+ select CPU_COPY_V3
+ select CPU_TLB_V3
+ help
+ The ARM610 is the successor to the ARM3 processor
+ and was produced by VLSI Technology Inc.
+
+ Say Y if you want support for the ARM610 processor.
+ Otherwise, say N.
+
+# ARM710
+config CPU_ARM710
+ bool "Support ARM710 processor" if !ARCH_CLPS7500 && ARCH_RPC
+ default y if ARCH_CLPS7500
+ select CPU_32v3
+ select CPU_CACHE_V3
+ select CPU_CACHE_VIVT
+ select CPU_COPY_V3
+ select CPU_TLB_V3
+ help
+ A 32-bit RISC microprocessor based on the ARM7 processor core
+ designed by Advanced RISC Machines Ltd. The ARM710 is the
+ successor to the ARM610 processor. It was released in
+ July 1994 by VLSI Technology Inc.
+
+ Say Y if you want support for the ARM710 processor.
+ Otherwise, say N.
+
+# ARM720T
+config CPU_ARM720T
+ bool "Support ARM720T processor" if !ARCH_CLPS711X && !ARCH_L7200 && !ARCH_CDB89712 && ARCH_INTEGRATOR
+ default y if ARCH_CLPS711X || ARCH_L7200 || ARCH_CDB89712 || ARCH_H720X
+ select CPU_32v4
+ select CPU_ABRT_LV4T
+ select CPU_CACHE_V4
+ select CPU_CACHE_VIVT
+ select CPU_COPY_V4WT
+ select CPU_TLB_V4WT
+ help
+ A 32-bit RISC processor with 8kByte Cache, Write Buffer and
+ MMU built around an ARM7TDMI core.
+
+ Say Y if you want support for the ARM720T processor.
+ Otherwise, say N.
+
+# ARM920T
+config CPU_ARM920T
+ bool "Support ARM920T processor" if !ARCH_S3C2410
+ depends on ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX
+ default y if ARCH_S3C2410
+ select CPU_32v4
+ select CPU_ABRT_EV4T
+ select CPU_CACHE_V4WT
+ select CPU_CACHE_VIVT
+ select CPU_COPY_V4WB
+ select CPU_TLB_V4WBI
+ help
+ The ARM920T is licensed to be produced by numerous vendors,
+ and is used in the Maverick EP9312 and the Samsung S3C2410.
+
+ More information on the Maverick EP9312 at
+ <http://linuxdevices.com/products/PD2382866068.html>.
+
+ Say Y if you want support for the ARM920T processor.
+ Otherwise, say N.
+
+# ARM922T
+config CPU_ARM922T
+ bool "Support ARM922T processor" if ARCH_INTEGRATOR
+ depends on ARCH_CAMELOT || ARCH_LH7A40X || ARCH_INTEGRATOR
+ default y if ARCH_CAMELOT || ARCH_LH7A40X
+ select CPU_32v4
+ select CPU_ABRT_EV4T
+ select CPU_CACHE_V4WT
+ select CPU_CACHE_VIVT
+ select CPU_COPY_V4WB
+ select CPU_TLB_V4WBI
+ help
+ The ARM922T is a version of the ARM920T, but with smaller
+ instruction and data caches. It is used in Altera's
+ Excalibur XA device family.
+
+ Say Y if you want support for the ARM922T processor.
+ Otherwise, say N.
+
+# ARM925T
+config CPU_ARM925T
+ bool "Support ARM925T processor" if ARCH_OMAP
+ depends on ARCH_OMAP1510
+ default y if ARCH_OMAP1510
+ select CPU_32v4
+ select CPU_ABRT_EV4T
+ select CPU_CACHE_V4WT
+ select CPU_CACHE_VIVT
+ select CPU_COPY_V4WB
+ select CPU_TLB_V4WBI
+ help
+ The ARM925T is a mix between the ARM920T and ARM926T, but with
+ different instruction and data caches. It is used in TI's OMAP
+ device family.
+
+ Say Y if you want support for the ARM925T processor.
+ Otherwise, say N.
+
+# ARM926T
+config CPU_ARM926T
+ bool "Support ARM926T processor" if ARCH_INTEGRATOR
+ depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX
+ default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX
+ select CPU_32v5
+ select CPU_ABRT_EV5TJ
+ select CPU_CACHE_VIVT
+ select CPU_COPY_V4WB
+ select CPU_TLB_V4WBI
+ help
+ This is a variant of the ARM920. It has slightly different
+ instruction sequences for cache and TLB operations. Curiously,
+ there is no documentation on it at the ARM corporate website.
+
+ Say Y if you want support for the ARM926T processor.
+ Otherwise, say N.
+
+# ARM1020 - needs validating
+config CPU_ARM1020
+ bool "Support ARM1020T (rev 0) processor"
+ depends on ARCH_INTEGRATOR
+ select CPU_32v5
+ select CPU_ABRT_EV4T
+ select CPU_CACHE_V4WT
+ select CPU_CACHE_VIVT
+ select CPU_COPY_V4WB
+ select CPU_TLB_V4WBI
+ help
+ The ARM1020 is the 32K cached version of the ARM10 processor,
+ with an addition of a floating-point unit.
+
+ Say Y if you want support for the ARM1020 processor.
+ Otherwise, say N.
+
+# ARM1020E - needs validating
+config CPU_ARM1020E
+ bool "Support ARM1020E processor"
+ depends on ARCH_INTEGRATOR
+ select CPU_32v5
+ select CPU_ABRT_EV4T
+ select CPU_CACHE_V4WT
+ select CPU_CACHE_VIVT
+ select CPU_COPY_V4WB
+ select CPU_TLB_V4WBI
+ depends on n
+
+# ARM1022E
+config CPU_ARM1022
+ bool "Support ARM1022E processor"
+ depends on ARCH_INTEGRATOR
+ select CPU_32v5
+ select CPU_ABRT_EV4T
+ select CPU_CACHE_VIVT
+ select CPU_COPY_V4WB # can probably do better
+ select CPU_TLB_V4WBI
+ help
+ The ARM1022E is an implementation of the ARMv5TE architecture
+ based upon the ARM10 integer core with a 16KiB L1 Harvard cache,
+ embedded trace macrocell, and a floating-point unit.
+
+ Say Y if you want support for the ARM1022E processor.
+ Otherwise, say N.
+
+# ARM1026EJ-S
+config CPU_ARM1026
+ bool "Support ARM1026EJ-S processor"
+ depends on ARCH_INTEGRATOR
+ select CPU_32v5
+ select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
+ select CPU_CACHE_VIVT
+ select CPU_COPY_V4WB # can probably do better
+ select CPU_TLB_V4WBI
+ help
+ The ARM1026EJ-S is an implementation of the ARMv5TEJ architecture
+ based upon the ARM10 integer core.
+
+ Say Y if you want support for the ARM1026EJ-S processor.
+ Otherwise, say N.
+
+# SA110
+config CPU_SA110
+ bool "Support StrongARM(R) SA-110 processor" if !ARCH_EBSA110 && !FOOTBRIDGE && !ARCH_TBOX && !ARCH_SHARK && !ARCH_NEXUSPCI && ARCH_RPC
+ default y if ARCH_EBSA110 || FOOTBRIDGE || ARCH_TBOX || ARCH_SHARK || ARCH_NEXUSPCI
+ select CPU_32v3 if ARCH_RPC
+ select CPU_32v4 if !ARCH_RPC
+ select CPU_ABRT_EV4
+ select CPU_CACHE_V4WB
+ select CPU_CACHE_VIVT
+ select CPU_COPY_V4WB
+ select CPU_TLB_V4WB
+ help
+ The Intel StrongARM(R) SA-110 is a 32-bit microprocessor and
+ is available at five speeds ranging from 100 MHz to 233 MHz.
+ More information is available at
+ <http://developer.intel.com/design/strong/sa110.htm>.
+
+ Say Y if you want support for the SA-110 processor.
+ Otherwise, say N.
+
+# SA1100
+config CPU_SA1100
+ bool
+ depends on ARCH_SA1100
+ default y
+ select CPU_32v4
+ select CPU_ABRT_EV4
+ select CPU_CACHE_V4WB
+ select CPU_CACHE_VIVT
+ select CPU_TLB_V4WB
+ select CPU_MINICACHE
+
+# XScale
+config CPU_XSCALE
+ bool
+ depends on ARCH_IOP3XX || ARCH_PXA || ARCH_IXP4XX || ARCH_IXP2000
+ default y
+ select CPU_32v5
+ select CPU_ABRT_EV5T
+ select CPU_CACHE_VIVT
+ select CPU_TLB_V4WBI
+ select CPU_MINICACHE
+
+# ARMv6
+config CPU_V6
+ bool "Support ARM V6 processor"
+ depends on ARCH_INTEGRATOR
+ select CPU_32v6
+ select CPU_ABRT_EV6
+ select CPU_CACHE_V6
+ select CPU_CACHE_VIPT
+ select CPU_COPY_V6
+ select CPU_TLB_V6
+
+# Figure out what processor architecture version we should be using.
+# This defines the compiler instruction set which depends on the machine type.
+config CPU_32v3
+ bool
+
+config CPU_32v4
+ bool
+
+config CPU_32v5
+ bool
+
+config CPU_32v6
+ bool
+
+# The abort model
+config CPU_ABRT_EV4
+ bool
+
+config CPU_ABRT_EV4T
+ bool
+
+config CPU_ABRT_LV4T
+ bool
+
+config CPU_ABRT_EV5T
+ bool
+
+config CPU_ABRT_EV5TJ
+ bool
+
+config CPU_ABRT_EV6
+ bool
+
+# The cache model
+config CPU_CACHE_V3
+ bool
+
+config CPU_CACHE_V4
+ bool
+
+config CPU_CACHE_V4WT
+ bool
+
+config CPU_CACHE_V4WB
+ bool
+
+config CPU_CACHE_V6
+ bool
+
+config CPU_CACHE_VIVT
+ bool
+
+config CPU_CACHE_VIPT
+ bool
+
+# The copy-page model
+config CPU_COPY_V3
+ bool
+
+config CPU_COPY_V4WT
+ bool
+
+config CPU_COPY_V4WB
+ bool
+
+config CPU_COPY_V6
+ bool
+
+# This selects the TLB model
+config CPU_TLB_V3
+ bool
+ help
+ ARM Architecture Version 3 TLB.
+
+config CPU_TLB_V4WT
+ bool
+ help
+ ARM Architecture Version 4 TLB with writethrough cache.
+
+config CPU_TLB_V4WB
+ bool
+ help
+ ARM Architecture Version 4 TLB with writeback cache.
+
+config CPU_TLB_V4WBI
+ bool
+ help
+ ARM Architecture Version 4 TLB with writeback cache and invalidate
+ instruction cache entry.
+
+config CPU_TLB_V6
+ bool
+
+config CPU_MINICACHE
+ bool
+ help
+ Processor has a minicache.
+
+comment "Processor Features"
+
+config ARM_THUMB
+ bool "Support Thumb user binaries"
+ depends on CPU_ARM720T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_V6
+ default y
+ help
+ Say Y if you want to include kernel support for running user space
+ Thumb binaries.
+
+ The Thumb instruction set is a compressed form of the standard ARM
+ instruction set resulting in smaller binaries at the expense of
+ slightly less efficient code.
+
+ If you don't know what this all is, saying Y is a safe choice.
+
+config CPU_BIG_ENDIAN
+ bool "Build big-endian kernel"
+ depends on ARCH_SUPPORTS_BIG_ENDIAN
+ help
+ Say Y if you plan on running a kernel in big-endian mode.
+ Note that your board must be properly built and your board
+ port must properly enable any big-endian related features
+ of your chipset/board/processor.
+
+config CPU_ICACHE_DISABLE
+ bool "Disable I-Cache"
+ depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020
+ help
+ Say Y here to disable the processor instruction cache. Unless
+ you have a reason not to or are unsure, say N.
+
+config CPU_DCACHE_DISABLE
+ bool "Disable D-Cache"
+ depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020
+ help
+ Say Y here to disable the processor data cache. Unless
+ you have a reason not to or are unsure, say N.
+
+config CPU_DCACHE_WRITETHROUGH
+ bool "Force write through D-cache"
+ depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020) && !CPU_DISABLE_DCACHE
+ default y if CPU_ARM925T
+ help
+ Say Y here to use the data cache in writethrough mode. Unless you
+ specifically require this or are unsure, say N.
+
+config CPU_CACHE_ROUND_ROBIN
+ bool "Round robin I and D cache replacement algorithm"
+ depends on (CPU_ARM926T || CPU_ARM1020) && (!CPU_ICACHE_DISABLE || !CPU_DCACHE_DISABLE)
+ help
+ Say Y here to use the predictable round-robin cache replacement
+ policy. Unless you specifically require this or are unsure, say N.
+
+config CPU_BPREDICT_DISABLE
+ bool "Disable branch prediction"
+ depends on CPU_ARM1020
+ help
+ Say Y here to disable branch prediction. If unsure, say N.
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
new file mode 100644
index 0000000..ccf316c
--- /dev/null
+++ b/arch/arm/mm/Makefile
@@ -0,0 +1,56 @@
+#
+# Makefile for the linux arm-specific parts of the memory manager.
+#
+
+obj-y := consistent.o extable.o fault-armv.o \
+ fault.o flush.o init.o ioremap.o mmap.o \
+ mm-armv.o
+
+obj-$(CONFIG_MODULES) += proc-syms.o
+
+obj-$(CONFIG_ALIGNMENT_TRAP) += alignment.o
+obj-$(CONFIG_DISCONTIGMEM) += discontig.o
+
+obj-$(CONFIG_CPU_ABRT_EV4) += abort-ev4.o
+obj-$(CONFIG_CPU_ABRT_EV4T) += abort-ev4t.o
+obj-$(CONFIG_CPU_ABRT_LV4T) += abort-lv4t.o
+obj-$(CONFIG_CPU_ABRT_EV5T) += abort-ev5t.o
+obj-$(CONFIG_CPU_ABRT_EV5TJ) += abort-ev5tj.o
+obj-$(CONFIG_CPU_ABRT_EV6) += abort-ev6.o
+
+obj-$(CONFIG_CPU_CACHE_V3) += cache-v3.o
+obj-$(CONFIG_CPU_CACHE_V4) += cache-v4.o
+obj-$(CONFIG_CPU_CACHE_V4WT) += cache-v4wt.o
+obj-$(CONFIG_CPU_CACHE_V4WB) += cache-v4wb.o
+obj-$(CONFIG_CPU_CACHE_V6) += cache-v6.o
+
+obj-$(CONFIG_CPU_COPY_V3) += copypage-v3.o
+obj-$(CONFIG_CPU_COPY_V4WT) += copypage-v4wt.o
+obj-$(CONFIG_CPU_COPY_V4WB) += copypage-v4wb.o
+obj-$(CONFIG_CPU_COPY_V6) += copypage-v6.o mmu.o
+obj-$(CONFIG_CPU_SA1100) += copypage-v4mc.o
+obj-$(CONFIG_CPU_XSCALE) += copypage-xscale.o
+
+obj-$(CONFIG_CPU_MINICACHE) += minicache.o
+
+obj-$(CONFIG_CPU_TLB_V3) += tlb-v3.o
+obj-$(CONFIG_CPU_TLB_V4WT) += tlb-v4.o
+obj-$(CONFIG_CPU_TLB_V4WB) += tlb-v4wb.o
+obj-$(CONFIG_CPU_TLB_V4WBI) += tlb-v4wbi.o
+obj-$(CONFIG_CPU_TLB_V6) += tlb-v6.o
+
+obj-$(CONFIG_CPU_ARM610) += proc-arm6_7.o
+obj-$(CONFIG_CPU_ARM710) += proc-arm6_7.o
+obj-$(CONFIG_CPU_ARM720T) += proc-arm720.o
+obj-$(CONFIG_CPU_ARM920T) += proc-arm920.o
+obj-$(CONFIG_CPU_ARM922T) += proc-arm922.o
+obj-$(CONFIG_CPU_ARM925T) += proc-arm925.o
+obj-$(CONFIG_CPU_ARM926T) += proc-arm926.o
+obj-$(CONFIG_CPU_ARM1020) += proc-arm1020.o
+obj-$(CONFIG_CPU_ARM1020E) += proc-arm1020e.o
+obj-$(CONFIG_CPU_ARM1022) += proc-arm1022.o
+obj-$(CONFIG_CPU_ARM1026) += proc-arm1026.o
+obj-$(CONFIG_CPU_SA110) += proc-sa110.o
+obj-$(CONFIG_CPU_SA1100) += proc-sa1100.o
+obj-$(CONFIG_CPU_XSCALE) += proc-xscale.o
+obj-$(CONFIG_CPU_V6) += proc-v6.o blockops.o
diff --git a/arch/arm/mm/abort-ev4.S b/arch/arm/mm/abort-ev4.S
new file mode 100644
index 0000000..4f18f9e
--- /dev/null
+++ b/arch/arm/mm/abort-ev4.S
@@ -0,0 +1,30 @@
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+/*
+ * Function: v4_early_abort
+ *
+ * Params : r2 = address of aborted instruction
+ * : r3 = saved SPSR
+ *
+ * Returns : r0 = address of abort
+ * : r1 = FSR, bit 11 = write
+ * : r2-r8 = corrupted
+ * : r9 = preserved
+ * : sp = pointer to registers
+ *
+ * Purpose : obtain information about current aborted instruction.
+ * Note: we read user space. This means we might cause a data
+ * abort here if the I-TLB and D-TLB aren't seeing the same
+ * picture. Unfortunately, this does happen. We live with it.
+ */
+ .align 5
+ENTRY(v4_early_abort)
+ mrc p15, 0, r1, c5, c0, 0 @ get FSR
+ mrc p15, 0, r0, c6, c0, 0 @ get FAR
+ ldr r3, [r2] @ read aborted ARM instruction
+ bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR
+ tst r3, #1 << 20 @ L = 1 -> write?
+ orreq r1, r1, #1 << 11 @ yes.
+ mov pc, lr
+
+
diff --git a/arch/arm/mm/abort-ev4t.S b/arch/arm/mm/abort-ev4t.S
new file mode 100644
index 0000000..b628254
--- /dev/null
+++ b/arch/arm/mm/abort-ev4t.S
@@ -0,0 +1,30 @@
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include "abort-macro.S"
+/*
+ * Function: v4t_early_abort
+ *
+ * Params : r2 = address of aborted instruction
+ * : r3 = saved SPSR
+ *
+ * Returns : r0 = address of abort
+ * : r1 = FSR, bit 11 = write
+ * : r2-r8 = corrupted
+ * : r9 = preserved
+ * : sp = pointer to registers
+ *
+ * Purpose : obtain information about current aborted instruction.
+ * Note: we read user space. This means we might cause a data
+ * abort here if the I-TLB and D-TLB aren't seeing the same
+ * picture. Unfortunately, this does happen. We live with it.
+ */
+ .align 5
+ENTRY(v4t_early_abort)
+ mrc p15, 0, r1, c5, c0, 0 @ get FSR
+ mrc p15, 0, r0, c6, c0, 0 @ get FAR
+ do_thumb_abort
+ ldreq r3, [r2] @ read aborted ARM instruction
+ bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR
+ tst r3, #1 << 20 @ check write
+ orreq r1, r1, #1 << 11
+ mov pc, lr
diff --git a/arch/arm/mm/abort-ev5t.S b/arch/arm/mm/abort-ev5t.S
new file mode 100644
index 0000000..02251b5
--- /dev/null
+++ b/arch/arm/mm/abort-ev5t.S
@@ -0,0 +1,31 @@
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include "abort-macro.S"
+/*
+ * Function: v5t_early_abort
+ *
+ * Params : r2 = address of aborted instruction
+ * : r3 = saved SPSR
+ *
+ * Returns : r0 = address of abort
+ * : r1 = FSR, bit 11 = write
+ * : r2-r8 = corrupted
+ * : r9 = preserved
+ * : sp = pointer to registers
+ *
+ * Purpose : obtain information about current aborted instruction.
+ * Note: we read user space. This means we might cause a data
+ * abort here if the I-TLB and D-TLB aren't seeing the same
+ * picture. Unfortunately, this does happen. We live with it.
+ */
+ .align 5
+ENTRY(v5t_early_abort)
+ mrc p15, 0, r1, c5, c0, 0 @ get FSR
+ mrc p15, 0, r0, c6, c0, 0 @ get FAR
+ do_thumb_abort
+ ldreq r3, [r2] @ read aborted ARM instruction
+ bic r1, r1, #1 << 11 @ clear bits 11 of FSR
+ do_ldrd_abort
+ tst r3, #1 << 20 @ check write
+ orreq r1, r1, #1 << 11
+ mov pc, lr
diff --git a/arch/arm/mm/abort-ev5tj.S b/arch/arm/mm/abort-ev5tj.S
new file mode 100644
index 0000000..bce68d6
--- /dev/null
+++ b/arch/arm/mm/abort-ev5tj.S
@@ -0,0 +1,35 @@
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include "abort-macro.S"
+/*
+ * Function: v5tj_early_abort
+ *
+ * Params : r2 = address of aborted instruction
+ * : r3 = saved SPSR
+ *
+ * Returns : r0 = address of abort
+ * : r1 = FSR, bit 11 = write
+ * : r2-r8 = corrupted
+ * : r9 = preserved
+ * : sp = pointer to registers
+ *
+ * Purpose : obtain information about current aborted instruction.
+ * Note: we read user space. This means we might cause a data
+ * abort here if the I-TLB and D-TLB aren't seeing the same
+ * picture. Unfortunately, this does happen. We live with it.
+ */
+ .align 5
+ENTRY(v5tj_early_abort)
+ mrc p15, 0, r1, c5, c0, 0 @ get FSR
+ mrc p15, 0, r0, c6, c0, 0 @ get FAR
+ bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR
+ tst r3, #PSR_J_BIT @ Java?
+ movne pc, lr
+ do_thumb_abort
+ ldreq r3, [r2] @ read aborted ARM instruction
+ do_ldrd_abort
+ tst r3, #1 << 20 @ L = 0 -> write
+ orreq r1, r1, #1 << 11 @ yes.
+ mov pc, lr
+
+
diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S
new file mode 100644
index 0000000..38b2cbb
--- /dev/null
+++ b/arch/arm/mm/abort-ev6.S
@@ -0,0 +1,23 @@
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+/*
+ * Function: v6_early_abort
+ *
+ * Params : r2 = address of aborted instruction
+ * : r3 = saved SPSR
+ *
+ * Returns : r0 = address of abort
+ * : r1 = FSR, bit 11 = write
+ * : r2-r8 = corrupted
+ * : r9 = preserved
+ * : sp = pointer to registers
+ *
+ * Purpose : obtain information about current aborted instruction.
+ */
+ .align 5
+ENTRY(v6_early_abort)
+ mrc p15, 0, r1, c5, c0, 0 @ get FSR
+ mrc p15, 0, r0, c6, c0, 0 @ get FAR
+ mov pc, lr
+
+
diff --git a/arch/arm/mm/abort-lv4t.S b/arch/arm/mm/abort-lv4t.S
new file mode 100644
index 0000000..db743e5
--- /dev/null
+++ b/arch/arm/mm/abort-lv4t.S
@@ -0,0 +1,220 @@
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+/*
+ * Function: v4t_late_abort
+ *
+ * Params : r2 = address of aborted instruction
+ * : r3 = saved SPSR
+ *
+ * Returns : r0 = address of abort
+ * : r1 = FSR, bit 11 = write
+ * : r2-r8 = corrupted
+ * : r9 = preserved
+ * : sp = pointer to registers
+ *
+ * Purpose : obtain information about current aborted instruction.
+ * Note: we read user space. This means we might cause a data
+ * abort here if the I-TLB and D-TLB aren't seeing the same
+ * picture. Unfortunately, this does happen. We live with it.
+ */
+ENTRY(v4t_late_abort)
+ tst r3, #PSR_T_BIT @ check for thumb mode
+ mrc p15, 0, r1, c5, c0, 0 @ get FSR
+ mrc p15, 0, r0, c6, c0, 0 @ get FAR
+ bne .data_thumb_abort
+ ldr r8, [r2] @ read arm instruction
+ bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR
+ tst r8, #1 << 20 @ L = 1 -> write?
+ orreq r1, r1, #1 << 11 @ yes.
+ and r7, r8, #15 << 24
+ add pc, pc, r7, lsr #22 @ Now branch to the relevant processing routine
+ nop
+
+/* 0 */ b .data_arm_lateldrhpost @ ldrh rd, [rn], #m/rm
+/* 1 */ b .data_arm_lateldrhpre @ ldrh rd, [rn, #m/rm]
+/* 2 */ b .data_unknown
+/* 3 */ b .data_unknown
+/* 4 */ b .data_arm_lateldrpostconst @ ldr rd, [rn], #m
+/* 5 */ b .data_arm_lateldrpreconst @ ldr rd, [rn, #m]
+/* 6 */ b .data_arm_lateldrpostreg @ ldr rd, [rn], rm
+/* 7 */ b .data_arm_lateldrprereg @ ldr rd, [rn, rm]
+/* 8 */ b .data_arm_ldmstm @ ldm*a rn, <rlist>
+/* 9 */ b .data_arm_ldmstm @ ldm*b rn, <rlist>
+/* a */ b .data_unknown
+/* b */ b .data_unknown
+/* c */ mov pc, lr @ ldc rd, [rn], #m @ Same as ldr rd, [rn], #m
+/* d */ mov pc, lr @ ldc rd, [rn, #m]
+/* e */ b .data_unknown
+/* f */
+.data_unknown: @ Part of jumptable
+ mov r0, r2
+ mov r1, r8
+ mov r2, sp
+ bl baddataabort
+ b ret_from_exception
+
+.data_arm_ldmstm:
+ tst r8, #1 << 21 @ check writeback bit
+ moveq pc, lr @ no writeback -> no fixup
+ mov r7, #0x11
+ orr r7, r7, #0x1100
+ and r6, r8, r7
+ and r2, r8, r7, lsl #1
+ add r6, r6, r2, lsr #1
+ and r2, r8, r7, lsl #2
+ add r6, r6, r2, lsr #2
+ and r2, r8, r7, lsl #3
+ add r6, r6, r2, lsr #3
+ add r6, r6, r6, lsr #8
+ add r6, r6, r6, lsr #4
+ and r6, r6, #15 @ r6 = no. of registers to transfer.
+ and r5, r8, #15 << 16 @ Extract 'n' from instruction
+ ldr r7, [sp, r5, lsr #14] @ Get register 'Rn'
+ tst r8, #1 << 23 @ Check U bit
+ subne r7, r7, r6, lsl #2 @ Undo increment
+ addeq r7, r7, r6, lsl #2 @ Undo decrement
+ str r7, [sp, r5, lsr #14] @ Put register 'Rn'
+ mov pc, lr
+
+.data_arm_lateldrhpre:
+ tst r8, #1 << 21 @ Check writeback bit
+ moveq pc, lr @ No writeback -> no fixup
+.data_arm_lateldrhpost:
+ and r5, r8, #0x00f @ get Rm / low nibble of immediate value
+ tst r8, #1 << 22 @ if (immediate offset)
+ andne r6, r8, #0xf00 @ { immediate high nibble
+ orrne r6, r5, r6, lsr #4 @ combine nibbles } else
+ ldreq r6, [sp, r5, lsl #2] @ { load Rm value }
+.data_arm_apply_r6_and_rn:
+ and r5, r8, #15 << 16 @ Extract 'n' from instruction
+ ldr r7, [sp, r5, lsr #14] @ Get register 'Rn'
+ tst r8, #1 << 23 @ Check U bit
+ subne r7, r7, r6 @ Undo incrmenet
+ addeq r7, r7, r6 @ Undo decrement
+ str r7, [sp, r5, lsr #14] @ Put register 'Rn'
+ mov pc, lr
+
+.data_arm_lateldrpreconst:
+ tst r8, #1 << 21 @ check writeback bit
+ moveq pc, lr @ no writeback -> no fixup
+.data_arm_lateldrpostconst:
+ movs r2, r8, lsl #20 @ Get offset
+ moveq pc, lr @ zero -> no fixup
+ and r5, r8, #15 << 16 @ Extract 'n' from instruction
+ ldr r7, [sp, r5, lsr #14] @ Get register 'Rn'
+ tst r8, #1 << 23 @ Check U bit
+ subne r7, r7, r2, lsr #20 @ Undo increment
+ addeq r7, r7, r2, lsr #20 @ Undo decrement
+ str r7, [sp, r5, lsr #14] @ Put register 'Rn'
+ mov pc, lr
+
+.data_arm_lateldrprereg:
+ tst r8, #1 << 21 @ check writeback bit
+ moveq pc, lr @ no writeback -> no fixup
+.data_arm_lateldrpostreg:
+ and r7, r8, #15 @ Extract 'm' from instruction
+ ldr r6, [sp, r7, lsl #2] @ Get register 'Rm'
+ mov r5, r8, lsr #7 @ get shift count
+ ands r5, r5, #31
+ and r7, r8, #0x70 @ get shift type
+ orreq r7, r7, #8 @ shift count = 0
+ add pc, pc, r7
+ nop
+
+ mov r6, r6, lsl r5 @ 0: LSL #!0
+ b .data_arm_apply_r6_and_rn
+ b .data_arm_apply_r6_and_rn @ 1: LSL #0
+ nop
+ b .data_unknown @ 2: MUL?
+ nop
+ b .data_unknown @ 3: MUL?
+ nop
+ mov r6, r6, lsr r5 @ 4: LSR #!0
+ b .data_arm_apply_r6_and_rn
+ mov r6, r6, lsr #32 @ 5: LSR #32
+ b .data_arm_apply_r6_and_rn
+ b .data_unknown @ 6: MUL?
+ nop
+ b .data_unknown @ 7: MUL?
+ nop
+ mov r6, r6, asr r5 @ 8: ASR #!0
+ b .data_arm_apply_r6_and_rn
+ mov r6, r6, asr #32 @ 9: ASR #32
+ b .data_arm_apply_r6_and_rn
+ b .data_unknown @ A: MUL?
+ nop
+ b .data_unknown @ B: MUL?
+ nop
+ mov r6, r6, ror r5 @ C: ROR #!0
+ b .data_arm_apply_r6_and_rn
+ mov r6, r6, rrx @ D: RRX
+ b .data_arm_apply_r6_and_rn
+ b .data_unknown @ E: MUL?
+ nop
+ b .data_unknown @ F: MUL?
+
+.data_thumb_abort:
+ ldrh r8, [r2] @ read instruction
+ tst r8, #1 << 11 @ L = 1 -> write?
+ orreq r1, r1, #1 << 8 @ yes
+ and r7, r8, #15 << 12
+ add pc, pc, r7, lsr #10 @ lookup in table
+ nop
+
+/* 0 */ b .data_unknown
+/* 1 */ b .data_unknown
+/* 2 */ b .data_unknown
+/* 3 */ b .data_unknown
+/* 4 */ b .data_unknown
+/* 5 */ b .data_thumb_reg
+/* 6 */ mov pc, lr
+/* 7 */ mov pc, lr
+/* 8 */ mov pc, lr
+/* 9 */ mov pc, lr
+/* A */ b .data_unknown
+/* B */ b .data_thumb_pushpop
+/* C */ b .data_thumb_ldmstm
+/* D */ b .data_unknown
+/* E */ b .data_unknown
+/* F */ b .data_unknown
+
+.data_thumb_reg:
+ tst r8, #1 << 9
+ moveq pc, lr
+ tst r8, #1 << 10 @ If 'S' (signed) bit is set
+ movne r1, #0 @ it must be a load instr
+ mov pc, lr
+
+.data_thumb_pushpop:
+ tst r8, #1 << 10
+ beq .data_unknown
+ and r6, r8, #0x55 @ hweight8(r8) + R bit
+ and r2, r8, #0xaa
+ add r6, r6, r2, lsr #1
+ and r2, r6, #0xcc
+ and r6, r6, #0x33
+ add r6, r6, r2, lsr #2
+ movs r7, r8, lsr #9 @ C = r8 bit 8 (R bit)
+ adc r6, r6, r6, lsr #4 @ high + low nibble + R bit
+ and r6, r6, #15 @ number of regs to transfer
+ ldr r7, [sp, #13 << 2]
+ tst r8, #1 << 11
+ addeq r7, r7, r6, lsl #2 @ increment SP if PUSH
+ subne r7, r7, r6, lsl #2 @ decrement SP if POP
+ str r7, [sp, #13 << 2]
+ mov pc, lr
+
+.data_thumb_ldmstm:
+ and r6, r8, #0x55 @ hweight8(r8)
+ and r2, r8, #0xaa
+ add r6, r6, r2, lsr #1
+ and r2, r6, #0xcc
+ and r6, r6, #0x33
+ add r6, r6, r2, lsr #2
+ add r6, r6, r6, lsr #4
+ and r5, r8, #7 << 8
+ ldr r7, [sp, r5, lsr #6]
+ and r6, r6, #15 @ number of regs to transfer
+ sub r7, r7, r6, lsl #2 @ always decrement
+ str r7, [sp, r5, lsr #6]
+ mov pc, lr
diff --git a/arch/arm/mm/abort-macro.S b/arch/arm/mm/abort-macro.S
new file mode 100644
index 0000000..d7cb1bf
--- /dev/null
+++ b/arch/arm/mm/abort-macro.S
@@ -0,0 +1,42 @@
+/*
+ * The ARM LDRD and Thumb LDRSB instructions use bit 20/11 (ARM/Thumb)
+ * differently than every other instruction, so it is set to 0 (write)
+ * even though the instructions are read instructions. This means that
+ * during an abort the instructions will be treated as a write and the
+ * handler will raise a signal from unwriteable locations if they
+ * fault. We have to specifically check for these instructions
+ * from the abort handlers to treat them properly.
+ *
+ */
+
+ .macro do_thumb_abort
+ tst r3, #PSR_T_BIT
+ beq not_thumb
+ ldrh r3, [r2] @ Read aborted Thumb instruction
+ and r3, r3, # 0xfe00 @ Mask opcode field
+ cmp r3, # 0x5600 @ Is it ldrsb?
+ orreq r3, r3, #1 << 11 @ Set L-bit if yes
+ tst r3, #1 << 11 @ L = 0 -> write
+ orreq r1, r1, #1 << 11 @ yes.
+ mov pc, lr
+not_thumb:
+ .endm
+
+/*
+ * We check for the following insturction encoding for LDRD.
+ *
+ * [27:25] == 0
+ * [7:4] == 1101
+ * [20] == 0
+ */
+ .macro do_ldrd_abort
+ tst r3, #0x0e000000 @ [27:25] == 0
+ bne not_ldrd
+ and r2, r3, #0x000000f0 @ [7:4] == 1101
+ cmp r2, #0x000000d0
+ bne not_ldrd
+ tst r3, #1 << 20 @ [20] == 0
+ moveq pc, lr
+not_ldrd:
+ .endm
+
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
new file mode 100644
index 0000000..81f4a8a
--- /dev/null
+++ b/arch/arm/mm/alignment.c
@@ -0,0 +1,756 @@
+/*
+ * linux/arch/arm/mm/alignment.c
+ *
+ * Copyright (C) 1995 Linus Torvalds
+ * Modifications for ARM processor (c) 1995-2001 Russell King
+ * Thumb aligment fault fixups (c) 2004 MontaVista Software, Inc.
+ * - Adapted from gdb/sim/arm/thumbemu.c -- Thumb instruction emulation.
+ * Copyright (C) 1996, Cygnus Software Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/config.h>
+#include <linux/compiler.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/proc_fs.h>
+#include <linux/init.h>
+
+#include <asm/uaccess.h>
+#include <asm/unaligned.h>
+
+#include "fault.h"
+
+/*
+ * 32-bit misaligned trap handler (c) 1998 San Mehat (CCC) -July 1998
+ * /proc/sys/debug/alignment, modified and integrated into
+ * Linux 2.1 by Russell King
+ *
+ * Speed optimisations and better fault handling by Russell King.
+ *
+ * *** NOTE ***
+ * This code is not portable to processors with late data abort handling.
+ */
+#define CODING_BITS(i) (i & 0x0e000000)
+
+#define LDST_I_BIT(i) (i & (1 << 26)) /* Immediate constant */
+#define LDST_P_BIT(i) (i & (1 << 24)) /* Preindex */
+#define LDST_U_BIT(i) (i & (1 << 23)) /* Add offset */
+#define LDST_W_BIT(i) (i & (1 << 21)) /* Writeback */
+#define LDST_L_BIT(i) (i & (1 << 20)) /* Load */
+
+#define LDST_P_EQ_U(i) ((((i) ^ ((i) >> 1)) & (1 << 23)) == 0)
+
+#define LDSTH_I_BIT(i) (i & (1 << 22)) /* half-word immed */
+#define LDM_S_BIT(i) (i & (1 << 22)) /* write CPSR from SPSR */
+
+#define RN_BITS(i) ((i >> 16) & 15) /* Rn */
+#define RD_BITS(i) ((i >> 12) & 15) /* Rd */
+#define RM_BITS(i) (i & 15) /* Rm */
+
+#define REGMASK_BITS(i) (i & 0xffff)
+#define OFFSET_BITS(i) (i & 0x0fff)
+
+#define IS_SHIFT(i) (i & 0x0ff0)
+#define SHIFT_BITS(i) ((i >> 7) & 0x1f)
+#define SHIFT_TYPE(i) (i & 0x60)
+#define SHIFT_LSL 0x00
+#define SHIFT_LSR 0x20
+#define SHIFT_ASR 0x40
+#define SHIFT_RORRRX 0x60
+
+static unsigned long ai_user;
+static unsigned long ai_sys;
+static unsigned long ai_skipped;
+static unsigned long ai_half;
+static unsigned long ai_word;
+static unsigned long ai_multi;
+static int ai_usermode;
+
+#ifdef CONFIG_PROC_FS
+static const char *usermode_action[] = {
+ "ignored",
+ "warn",
+ "fixup",
+ "fixup+warn",
+ "signal",
+ "signal+warn"
+};
+
+static int
+proc_alignment_read(char *page, char **start, off_t off, int count, int *eof,
+ void *data)
+{
+ char *p = page;
+ int len;
+
+ p += sprintf(p, "User:\t\t%lu\n", ai_user);
+ p += sprintf(p, "System:\t\t%lu\n", ai_sys);
+ p += sprintf(p, "Skipped:\t%lu\n", ai_skipped);
+ p += sprintf(p, "Half:\t\t%lu\n", ai_half);
+ p += sprintf(p, "Word:\t\t%lu\n", ai_word);
+ p += sprintf(p, "Multi:\t\t%lu\n", ai_multi);
+ p += sprintf(p, "User faults:\t%i (%s)\n", ai_usermode,
+ usermode_action[ai_usermode]);
+
+ len = (p - page) - off;
+ if (len < 0)
+ len = 0;
+
+ *eof = (len <= count) ? 1 : 0;
+ *start = page + off;
+
+ return len;
+}
+
+static int proc_alignment_write(struct file *file, const char __user *buffer,
+ unsigned long count, void *data)
+{
+ char mode;
+
+ if (count > 0) {
+ if (get_user(mode, buffer))
+ return -EFAULT;
+ if (mode >= '0' && mode <= '5')
+ ai_usermode = mode - '0';
+ }
+ return count;
+}
+
+#endif /* CONFIG_PROC_FS */
+
+union offset_union {
+ unsigned long un;
+ signed long sn;
+};
+
+#define TYPE_ERROR 0
+#define TYPE_FAULT 1
+#define TYPE_LDST 2
+#define TYPE_DONE 3
+
+#ifdef __ARMEB__
+#define BE 1
+#define FIRST_BYTE_16 "mov %1, %1, ror #8\n"
+#define FIRST_BYTE_32 "mov %1, %1, ror #24\n"
+#define NEXT_BYTE "ror #24"
+#else
+#define BE 0
+#define FIRST_BYTE_16
+#define FIRST_BYTE_32
+#define NEXT_BYTE "lsr #8"
+#endif
+
+#define __get8_unaligned_check(ins,val,addr,err) \
+ __asm__( \
+ "1: "ins" %1, [%2], #1\n" \
+ "2:\n" \
+ " .section .fixup,\"ax\"\n" \
+ " .align 2\n" \
+ "3: mov %0, #1\n" \
+ " b 2b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .align 3\n" \
+ " .long 1b, 3b\n" \
+ " .previous\n" \
+ : "=r" (err), "=&r" (val), "=r" (addr) \
+ : "0" (err), "2" (addr))
+
+#define __get16_unaligned_check(ins,val,addr) \
+ do { \
+ unsigned int err = 0, v, a = addr; \
+ __get8_unaligned_check(ins,v,a,err); \
+ val = v << ((BE) ? 8 : 0); \
+ __get8_unaligned_check(ins,v,a,err); \
+ val |= v << ((BE) ? 0 : 8); \
+ if (err) \
+ goto fault; \
+ } while (0)
+
+#define get16_unaligned_check(val,addr) \
+ __get16_unaligned_check("ldrb",val,addr)
+
+#define get16t_unaligned_check(val,addr) \
+ __get16_unaligned_check("ldrbt",val,addr)
+
+#define __get32_unaligned_check(ins,val,addr) \
+ do { \
+ unsigned int err = 0, v, a = addr; \
+ __get8_unaligned_check(ins,v,a,err); \
+ val = v << ((BE) ? 24 : 0); \
+ __get8_unaligned_check(ins,v,a,err); \
+ val |= v << ((BE) ? 16 : 8); \
+ __get8_unaligned_check(ins,v,a,err); \
+ val |= v << ((BE) ? 8 : 16); \
+ __get8_unaligned_check(ins,v,a,err); \
+ val |= v << ((BE) ? 0 : 24); \
+ if (err) \
+ goto fault; \
+ } while (0)
+
+#define get32_unaligned_check(val,addr) \
+ __get32_unaligned_check("ldrb",val,addr)
+
+#define get32t_unaligned_check(val,addr) \
+ __get32_unaligned_check("ldrbt",val,addr)
+
+#define __put16_unaligned_check(ins,val,addr) \
+ do { \
+ unsigned int err = 0, v = val, a = addr; \
+ __asm__( FIRST_BYTE_16 \
+ "1: "ins" %1, [%2], #1\n" \
+ " mov %1, %1, "NEXT_BYTE"\n" \
+ "2: "ins" %1, [%2]\n" \
+ "3:\n" \
+ " .section .fixup,\"ax\"\n" \
+ " .align 2\n" \
+ "4: mov %0, #1\n" \
+ " b 3b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .align 3\n" \
+ " .long 1b, 4b\n" \
+ " .long 2b, 4b\n" \
+ " .previous\n" \
+ : "=r" (err), "=&r" (v), "=&r" (a) \
+ : "0" (err), "1" (v), "2" (a)); \
+ if (err) \
+ goto fault; \
+ } while (0)
+
+#define put16_unaligned_check(val,addr) \
+ __put16_unaligned_check("strb",val,addr)
+
+#define put16t_unaligned_check(val,addr) \
+ __put16_unaligned_check("strbt",val,addr)
+
+#define __put32_unaligned_check(ins,val,addr) \
+ do { \
+ unsigned int err = 0, v = val, a = addr; \
+ __asm__( FIRST_BYTE_32 \
+ "1: "ins" %1, [%2], #1\n" \
+ " mov %1, %1, "NEXT_BYTE"\n" \
+ "2: "ins" %1, [%2], #1\n" \
+ " mov %1, %1, "NEXT_BYTE"\n" \
+ "3: "ins" %1, [%2], #1\n" \
+ " mov %1, %1, "NEXT_BYTE"\n" \
+ "4: "ins" %1, [%2]\n" \
+ "5:\n" \
+ " .section .fixup,\"ax\"\n" \
+ " .align 2\n" \
+ "6: mov %0, #1\n" \
+ " b 5b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .align 3\n" \
+ " .long 1b, 6b\n" \
+ " .long 2b, 6b\n" \
+ " .long 3b, 6b\n" \
+ " .long 4b, 6b\n" \
+ " .previous\n" \
+ : "=r" (err), "=&r" (v), "=&r" (a) \
+ : "0" (err), "1" (v), "2" (a)); \
+ if (err) \
+ goto fault; \
+ } while (0)
+
+#define put32_unaligned_check(val,addr) \
+ __put32_unaligned_check("strb", val, addr)
+
+#define put32t_unaligned_check(val,addr) \
+ __put32_unaligned_check("strbt", val, addr)
+
+static void
+do_alignment_finish_ldst(unsigned long addr, unsigned long instr, struct pt_regs *regs, union offset_union offset)
+{
+ if (!LDST_U_BIT(instr))
+ offset.un = -offset.un;
+
+ if (!LDST_P_BIT(instr))
+ addr += offset.un;
+
+ if (!LDST_P_BIT(instr) || LDST_W_BIT(instr))
+ regs->uregs[RN_BITS(instr)] = addr;
+}
+
+static int
+do_alignment_ldrhstrh(unsigned long addr, unsigned long instr, struct pt_regs *regs)
+{
+ unsigned int rd = RD_BITS(instr);
+
+ if ((instr & 0x01f00ff0) == 0x01000090)
+ goto swp;
+
+ if ((instr & 0x90) != 0x90 || (instr & 0x60) == 0)
+ goto bad;
+
+ ai_half += 1;
+
+ if (user_mode(regs))
+ goto user;
+
+ if (LDST_L_BIT(instr)) {
+ unsigned long val;
+ get16_unaligned_check(val, addr);
+
+ /* signed half-word? */
+ if (instr & 0x40)
+ val = (signed long)((signed short) val);
+
+ regs->uregs[rd] = val;
+ } else
+ put16_unaligned_check(regs->uregs[rd], addr);
+
+ return TYPE_LDST;
+
+ user:
+ if (LDST_L_BIT(instr)) {
+ unsigned long val;
+ get16t_unaligned_check(val, addr);
+
+ /* signed half-word? */
+ if (instr & 0x40)
+ val = (signed long)((signed short) val);
+
+ regs->uregs[rd] = val;
+ } else
+ put16t_unaligned_check(regs->uregs[rd], addr);
+
+ return TYPE_LDST;
+
+ swp:
+ printk(KERN_ERR "Alignment trap: not handling swp instruction\n");
+ bad:
+ return TYPE_ERROR;
+
+ fault:
+ return TYPE_FAULT;
+}
+
+static int
+do_alignment_ldrstr(unsigned long addr, unsigned long instr, struct pt_regs *regs)
+{
+ unsigned int rd = RD_BITS(instr);
+
+ ai_word += 1;
+
+ if ((!LDST_P_BIT(instr) && LDST_W_BIT(instr)) || user_mode(regs))
+ goto trans;
+
+ if (LDST_L_BIT(instr)) {
+ unsigned int val;
+ get32_unaligned_check(val, addr);
+ regs->uregs[rd] = val;
+ } else
+ put32_unaligned_check(regs->uregs[rd], addr);
+ return TYPE_LDST;
+
+ trans:
+ if (LDST_L_BIT(instr)) {
+ unsigned int val;
+ get32t_unaligned_check(val, addr);
+ regs->uregs[rd] = val;
+ } else
+ put32t_unaligned_check(regs->uregs[rd], addr);
+ return TYPE_LDST;
+
+ fault:
+ return TYPE_FAULT;
+}
+
+/*
+ * LDM/STM alignment handler.
+ *
+ * There are 4 variants of this instruction:
+ *
+ * B = rn pointer before instruction, A = rn pointer after instruction
+ * ------ increasing address ----->
+ * | | r0 | r1 | ... | rx | |
+ * PU = 01 B A
+ * PU = 11 B A
+ * PU = 00 A B
+ * PU = 10 A B
+ */
+static int
+do_alignment_ldmstm(unsigned long addr, unsigned long instr, struct pt_regs *regs)
+{
+ unsigned int rd, rn, correction, nr_regs, regbits;
+ unsigned long eaddr, newaddr;
+
+ if (LDM_S_BIT(instr))
+ goto bad;
+
+ correction = 4; /* processor implementation defined */
+ regs->ARM_pc += correction;
+
+ ai_multi += 1;
+
+ /* count the number of registers in the mask to be transferred */
+ nr_regs = hweight16(REGMASK_BITS(instr)) * 4;
+
+ rn = RN_BITS(instr);
+ newaddr = eaddr = regs->uregs[rn];
+
+ if (!LDST_U_BIT(instr))
+ nr_regs = -nr_regs;
+ newaddr += nr_regs;
+ if (!LDST_U_BIT(instr))
+ eaddr = newaddr;
+
+ if (LDST_P_EQ_U(instr)) /* U = P */
+ eaddr += 4;
+
+ /*
+ * For alignment faults on the ARM922T/ARM920T the MMU makes
+ * the FSR (and hence addr) equal to the updated base address
+ * of the multiple access rather than the restored value.
+ * Switch this message off if we've got a ARM92[02], otherwise
+ * [ls]dm alignment faults are noisy!
+ */
+#if !(defined CONFIG_CPU_ARM922T) && !(defined CONFIG_CPU_ARM920T)
+ /*
+ * This is a "hint" - we already have eaddr worked out by the
+ * processor for us.
+ */
+ if (addr != eaddr) {
+ printk(KERN_ERR "LDMSTM: PC = %08lx, instr = %08lx, "
+ "addr = %08lx, eaddr = %08lx\n",
+ instruction_pointer(regs), instr, addr, eaddr);
+ show_regs(regs);
+ }
+#endif
+
+ if (user_mode(regs)) {
+ for (regbits = REGMASK_BITS(instr), rd = 0; regbits;
+ regbits >>= 1, rd += 1)
+ if (regbits & 1) {
+ if (LDST_L_BIT(instr)) {
+ unsigned int val;
+ get32t_unaligned_check(val, eaddr);
+ regs->uregs[rd] = val;
+ } else
+ put32t_unaligned_check(regs->uregs[rd], eaddr);
+ eaddr += 4;
+ }
+ } else {
+ for (regbits = REGMASK_BITS(instr), rd = 0; regbits;
+ regbits >>= 1, rd += 1)
+ if (regbits & 1) {
+ if (LDST_L_BIT(instr)) {
+ unsigned int val;
+ get32_unaligned_check(val, eaddr);
+ regs->uregs[rd] = val;
+ } else
+ put32_unaligned_check(regs->uregs[rd], eaddr);
+ eaddr += 4;
+ }
+ }
+
+ if (LDST_W_BIT(instr))
+ regs->uregs[rn] = newaddr;
+ if (!LDST_L_BIT(instr) || !(REGMASK_BITS(instr) & (1 << 15)))
+ regs->ARM_pc -= correction;
+ return TYPE_DONE;
+
+fault:
+ regs->ARM_pc -= correction;
+ return TYPE_FAULT;
+
+bad:
+ printk(KERN_ERR "Alignment trap: not handling ldm with s-bit set\n");
+ return TYPE_ERROR;
+}
+
+/*
+ * Convert Thumb ld/st instruction forms to equivalent ARM instructions so
+ * we can reuse ARM userland alignment fault fixups for Thumb.
+ *
+ * This implementation was initially based on the algorithm found in
+ * gdb/sim/arm/thumbemu.c. It is basically just a code reduction of same
+ * to convert only Thumb ld/st instruction forms to equivalent ARM forms.
+ *
+ * NOTES:
+ * 1. Comments below refer to ARM ARM DDI0100E Thumb Instruction sections.
+ * 2. If for some reason we're passed an non-ld/st Thumb instruction to
+ * decode, we return 0xdeadc0de. This should never happen under normal
+ * circumstances but if it does, we've got other problems to deal with
+ * elsewhere and we obviously can't fix those problems here.
+ */
+
+static unsigned long
+thumb2arm(u16 tinstr)
+{
+ u32 L = (tinstr & (1<<11)) >> 11;
+
+ switch ((tinstr & 0xf800) >> 11) {
+ /* 6.5.1 Format 1: */
+ case 0x6000 >> 11: /* 7.1.52 STR(1) */
+ case 0x6800 >> 11: /* 7.1.26 LDR(1) */
+ case 0x7000 >> 11: /* 7.1.55 STRB(1) */
+ case 0x7800 >> 11: /* 7.1.30 LDRB(1) */
+ return 0xe5800000 |
+ ((tinstr & (1<<12)) << (22-12)) | /* fixup */
+ (L<<20) | /* L==1? */
+ ((tinstr & (7<<0)) << (12-0)) | /* Rd */
+ ((tinstr & (7<<3)) << (16-3)) | /* Rn */
+ ((tinstr & (31<<6)) >> /* immed_5 */
+ (6 - ((tinstr & (1<<12)) ? 0 : 2)));
+ case 0x8000 >> 11: /* 7.1.57 STRH(1) */
+ case 0x8800 >> 11: /* 7.1.32 LDRH(1) */
+ return 0xe1c000b0 |
+ (L<<20) | /* L==1? */
+ ((tinstr & (7<<0)) << (12-0)) | /* Rd */
+ ((tinstr & (7<<3)) << (16-3)) | /* Rn */
+ ((tinstr & (7<<6)) >> (6-1)) | /* immed_5[2:0] */
+ ((tinstr & (3<<9)) >> (9-8)); /* immed_5[4:3] */
+
+ /* 6.5.1 Format 2: */
+ case 0x5000 >> 11:
+ case 0x5800 >> 11:
+ {
+ static const u32 subset[8] = {
+ 0xe7800000, /* 7.1.53 STR(2) */
+ 0xe18000b0, /* 7.1.58 STRH(2) */
+ 0xe7c00000, /* 7.1.56 STRB(2) */
+ 0xe19000d0, /* 7.1.34 LDRSB */
+ 0xe7900000, /* 7.1.27 LDR(2) */
+ 0xe19000b0, /* 7.1.33 LDRH(2) */
+ 0xe7d00000, /* 7.1.31 LDRB(2) */
+ 0xe19000f0 /* 7.1.35 LDRSH */
+ };
+ return subset[(tinstr & (7<<9)) >> 9] |
+ ((tinstr & (7<<0)) << (12-0)) | /* Rd */
+ ((tinstr & (7<<3)) << (16-3)) | /* Rn */
+ ((tinstr & (7<<6)) >> (6-0)); /* Rm */
+ }
+
+ /* 6.5.1 Format 3: */
+ case 0x4800 >> 11: /* 7.1.28 LDR(3) */
+ /* NOTE: This case is not technically possible. We're
+ * loading 32-bit memory data via PC relative
+ * addressing mode. So we can and should eliminate
+ * this case. But I'll leave it here for now.
+ */
+ return 0xe59f0000 |
+ ((tinstr & (7<<8)) << (12-8)) | /* Rd */
+ ((tinstr & 255) << (2-0)); /* immed_8 */
+
+ /* 6.5.1 Format 4: */
+ case 0x9000 >> 11: /* 7.1.54 STR(3) */
+ case 0x9800 >> 11: /* 7.1.29 LDR(4) */
+ return 0xe58d0000 |
+ (L<<20) | /* L==1? */
+ ((tinstr & (7<<8)) << (12-8)) | /* Rd */
+ ((tinstr & 255) << 2); /* immed_8 */
+
+ /* 6.6.1 Format 1: */
+ case 0xc000 >> 11: /* 7.1.51 STMIA */
+ case 0xc800 >> 11: /* 7.1.25 LDMIA */
+ {
+ u32 Rn = (tinstr & (7<<8)) >> 8;
+ u32 W = ((L<<Rn) & (tinstr&255)) ? 0 : 1<<21;
+
+ return 0xe8800000 | W | (L<<20) | (Rn<<16) |
+ (tinstr&255);
+ }
+
+ /* 6.6.1 Format 2: */
+ case 0xb000 >> 11: /* 7.1.48 PUSH */
+ case 0xb800 >> 11: /* 7.1.47 POP */
+ if ((tinstr & (3 << 9)) == 0x0400) {
+ static const u32 subset[4] = {
+ 0xe92d0000, /* STMDB sp!,{registers} */
+ 0xe92d4000, /* STMDB sp!,{registers,lr} */
+ 0xe8bd0000, /* LDMIA sp!,{registers} */
+ 0xe8bd8000 /* LDMIA sp!,{registers,pc} */
+ };
+ return subset[(L<<1) | ((tinstr & (1<<8)) >> 8)] |
+ (tinstr & 255); /* register_list */
+ }
+ /* Else fall through for illegal instruction case */
+
+ default:
+ return 0xdeadc0de;
+ }
+}
+
+static int
+do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+ union offset_union offset;
+ unsigned long instr = 0, instrptr;
+ int (*handler)(unsigned long addr, unsigned long instr, struct pt_regs *regs);
+ unsigned int type;
+ mm_segment_t fs;
+ unsigned int fault;
+ u16 tinstr = 0;
+
+ instrptr = instruction_pointer(regs);
+
+ fs = get_fs();
+ set_fs(KERNEL_DS);
+ if thumb_mode(regs) {
+ fault = __get_user(tinstr, (u16 *)(instrptr & ~1));
+ if (!(fault))
+ instr = thumb2arm(tinstr);
+ } else
+ fault = __get_user(instr, (u32 *)instrptr);
+ set_fs(fs);
+
+ if (fault) {
+ type = TYPE_FAULT;
+ goto bad_or_fault;
+ }
+
+ if (user_mode(regs))
+ goto user;
+
+ ai_sys += 1;
+
+ fixup:
+
+ regs->ARM_pc += thumb_mode(regs) ? 2 : 4;
+
+ switch (CODING_BITS(instr)) {
+ case 0x00000000: /* ldrh or strh */
+ if (LDSTH_I_BIT(instr))
+ offset.un = (instr & 0xf00) >> 4 | (instr & 15);
+ else
+ offset.un = regs->uregs[RM_BITS(instr)];
+ handler = do_alignment_ldrhstrh;
+ break;
+
+ case 0x04000000: /* ldr or str immediate */
+ offset.un = OFFSET_BITS(instr);
+ handler = do_alignment_ldrstr;
+ break;
+
+ case 0x06000000: /* ldr or str register */
+ offset.un = regs->uregs[RM_BITS(instr)];
+
+ if (IS_SHIFT(instr)) {
+ unsigned int shiftval = SHIFT_BITS(instr);
+
+ switch(SHIFT_TYPE(instr)) {
+ case SHIFT_LSL:
+ offset.un <<= shiftval;
+ break;
+
+ case SHIFT_LSR:
+ offset.un >>= shiftval;
+ break;
+
+ case SHIFT_ASR:
+ offset.sn >>= shiftval;
+ break;
+
+ case SHIFT_RORRRX:
+ if (shiftval == 0) {
+ offset.un >>= 1;
+ if (regs->ARM_cpsr & PSR_C_BIT)
+ offset.un |= 1 << 31;
+ } else
+ offset.un = offset.un >> shiftval |
+ offset.un << (32 - shiftval);
+ break;
+ }
+ }
+ handler = do_alignment_ldrstr;
+ break;
+
+ case 0x08000000: /* ldm or stm */
+ handler = do_alignment_ldmstm;
+ break;
+
+ default:
+ goto bad;
+ }
+
+ type = handler(addr, instr, regs);
+
+ if (type == TYPE_ERROR || type == TYPE_FAULT)
+ goto bad_or_fault;
+
+ if (type == TYPE_LDST)
+ do_alignment_finish_ldst(addr, instr, regs, offset);
+
+ return 0;
+
+ bad_or_fault:
+ if (type == TYPE_ERROR)
+ goto bad;
+ regs->ARM_pc -= thumb_mode(regs) ? 2 : 4;
+ /*
+ * We got a fault - fix it up, or die.
+ */
+ do_bad_area(current, current->mm, addr, fsr, regs);
+ return 0;
+
+ bad:
+ /*
+ * Oops, we didn't handle the instruction.
+ */
+ printk(KERN_ERR "Alignment trap: not handling instruction "
+ "%0*lx at [<%08lx>]\n",
+ thumb_mode(regs) ? 4 : 8,
+ thumb_mode(regs) ? tinstr : instr, instrptr);
+ ai_skipped += 1;
+ return 1;
+
+ user:
+ ai_user += 1;
+
+ if (ai_usermode & 1)
+ printk("Alignment trap: %s (%d) PC=0x%08lx Instr=0x%0*lx "
+ "Address=0x%08lx FSR 0x%03x\n", current->comm,
+ current->pid, instrptr,
+ thumb_mode(regs) ? 4 : 8,
+ thumb_mode(regs) ? tinstr : instr,
+ addr, fsr);
+
+ if (ai_usermode & 2)
+ goto fixup;
+
+ if (ai_usermode & 4)
+ force_sig(SIGBUS, current);
+ else
+ set_cr(cr_no_alignment);
+
+ return 0;
+}
+
+/*
+ * This needs to be done after sysctl_init, otherwise sys/ will be
+ * overwritten. Actually, this shouldn't be in sys/ at all since
+ * it isn't a sysctl, and it doesn't contain sysctl information.
+ * We now locate it in /proc/cpu/alignment instead.
+ */
+static int __init alignment_init(void)
+{
+#ifdef CONFIG_PROC_FS
+ struct proc_dir_entry *res;
+
+ res = proc_mkdir("cpu", NULL);
+ if (!res)
+ return -ENOMEM;
+
+ res = create_proc_entry("alignment", S_IWUSR | S_IRUGO, res);
+ if (!res)
+ return -ENOMEM;
+
+ res->read_proc = proc_alignment_read;
+ res->write_proc = proc_alignment_write;
+#endif
+
+ hook_fault_code(1, do_alignment, SIGILL, "alignment exception");
+ hook_fault_code(3, do_alignment, SIGILL, "alignment exception");
+
+ return 0;
+}
+
+fs_initcall(alignment_init);
diff --git a/arch/arm/mm/blockops.c b/arch/arm/mm/blockops.c
new file mode 100644
index 0000000..806c6ee
--- /dev/null
+++ b/arch/arm/mm/blockops.c
@@ -0,0 +1,184 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+
+#include <asm/memory.h>
+#include <asm/ptrace.h>
+#include <asm/cacheflush.h>
+#include <asm/traps.h>
+
+extern struct cpu_cache_fns blk_cache_fns;
+
+#define HARVARD_CACHE
+
+/*
+ * blk_flush_kern_dcache_page(kaddr)
+ *
+ * Ensure that the data held in the page kaddr is written back
+ * to the page in question.
+ *
+ * - kaddr - kernel address (guaranteed to be page aligned)
+ */
+static void __attribute__((naked))
+blk_flush_kern_dcache_page(void *kaddr)
+{
+ asm(
+ "add r1, r0, %0 \n\
+1: .word 0xec401f0e @ mcrr p15, 0, r0, r1, c14, 0 @ blocking \n\
+ mov r0, #0 \n\
+ mcr p15, 0, r0, c7, c5, 0 \n\
+ mcr p15, 0, r0, c7, c10, 4 \n\
+ mov pc, lr"
+ :
+ : "I" (PAGE_SIZE));
+}
+
+/*
+ * blk_dma_inv_range(start,end)
+ *
+ * Invalidate the data cache within the specified region; we will
+ * be performing a DMA operation in this region and we want to
+ * purge old data in the cache.
+ *
+ * - start - virtual start address of region
+ * - end - virtual end address of region
+ */
+static void __attribute__((naked))
+blk_dma_inv_range_unified(unsigned long start, unsigned long end)
+{
+ asm(
+ "tst r0, %0 \n\
+ mcrne p15, 0, r0, c7, c11, 1 @ clean unified line \n\
+ tst r1, %0 \n\
+ mcrne p15, 0, r1, c7, c15, 1 @ clean & invalidate unified line\n\
+ .word 0xec401f06 @ mcrr p15, 0, r1, r0, c6, 0 @ blocking \n\
+ mov r0, #0 \n\
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer \n\
+ mov pc, lr"
+ :
+ : "I" (L1_CACHE_BYTES - 1));
+}
+
+static void __attribute__((naked))
+blk_dma_inv_range_harvard(unsigned long start, unsigned long end)
+{
+ asm(
+ "tst r0, %0 \n\
+ mcrne p15, 0, r0, c7, c10, 1 @ clean D line \n\
+ tst r1, %0 \n\
+ mcrne p15, 0, r1, c7, c14, 1 @ clean & invalidate D line \n\
+ .word 0xec401f06 @ mcrr p15, 0, r1, r0, c6, 0 @ blocking \n\
+ mov r0, #0 \n\
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer \n\
+ mov pc, lr"
+ :
+ : "I" (L1_CACHE_BYTES - 1));
+}
+
+/*
+ * blk_dma_clean_range(start,end)
+ * - start - virtual start address of region
+ * - end - virtual end address of region
+ */
+static void __attribute__((naked))
+blk_dma_clean_range(unsigned long start, unsigned long end)
+{
+ asm(
+ ".word 0xec401f0c @ mcrr p15, 0, r1, r0, c12, 0 @ blocking \n\
+ mov r0, #0 \n\
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer \n\
+ mov pc, lr");
+}
+
+/*
+ * blk_dma_flush_range(start,end)
+ * - start - virtual start address of region
+ * - end - virtual end address of region
+ */
+static void __attribute__((naked))
+blk_dma_flush_range(unsigned long start, unsigned long end)
+{
+ asm(
+ ".word 0xec401f0e @ mcrr p15, 0, r1, r0, c14, 0 @ blocking \n\
+ mov pc, lr");
+}
+
+static int blockops_trap(struct pt_regs *regs, unsigned int instr)
+{
+ regs->ARM_r4 |= regs->ARM_r2;
+ regs->ARM_pc += 4;
+ return 0;
+}
+
+static char *func[] = {
+ "Prefetch data range",
+ "Clean+Invalidate data range",
+ "Clean data range",
+ "Invalidate data range",
+ "Invalidate instr range"
+};
+
+static struct undef_hook blockops_hook __initdata = {
+ .instr_mask = 0x0fffffd0,
+ .instr_val = 0x0c401f00,
+ .cpsr_mask = PSR_T_BIT,
+ .cpsr_val = 0,
+ .fn = blockops_trap,
+};
+
+static int __init blockops_check(void)
+{
+ register unsigned int err asm("r4") = 0;
+ unsigned int err_pos = 1;
+ unsigned int cache_type;
+ int i;
+
+ asm("mrc p15, 0, %0, c0, c0, 1" : "=r" (cache_type));
+
+ printk("Checking V6 block cache operations:\n");
+ register_undef_hook(&blockops_hook);
+
+ __asm__ ("mov r0, %0\n\t"
+ "mov r1, %1\n\t"
+ "mov r2, #1\n\t"
+ ".word 0xec401f2c @ mcrr p15, 0, r1, r0, c12, 2\n\t"
+ "mov r2, #2\n\t"
+ ".word 0xec401f0e @ mcrr p15, 0, r1, r0, c14, 0\n\t"
+ "mov r2, #4\n\t"
+ ".word 0xec401f0c @ mcrr p15, 0, r1, r0, c12, 0\n\t"
+ "mov r2, #8\n\t"
+ ".word 0xec401f06 @ mcrr p15, 0, r1, r0, c6, 0\n\t"
+ "mov r2, #16\n\t"
+ ".word 0xec401f05 @ mcrr p15, 0, r1, r0, c5, 0\n\t"
+ :
+ : "r" (PAGE_OFFSET), "r" (PAGE_OFFSET + 128)
+ : "r0", "r1", "r2");
+
+ unregister_undef_hook(&blockops_hook);
+
+ for (i = 0; i < ARRAY_SIZE(func); i++, err_pos <<= 1)
+ printk("%30s: %ssupported\n", func[i], err & err_pos ? "not " : "");
+
+ if ((err & 8) == 0) {
+ printk(" --> Using %s block cache invalidate\n",
+ cache_type & (1 << 24) ? "harvard" : "unified");
+ if (cache_type & (1 << 24))
+ cpu_cache.dma_inv_range = blk_dma_inv_range_harvard;
+ else
+ cpu_cache.dma_inv_range = blk_dma_inv_range_unified;
+ }
+ if ((err & 4) == 0) {
+ printk(" --> Using block cache clean\n");
+ cpu_cache.dma_clean_range = blk_dma_clean_range;
+ }
+ if ((err & 2) == 0) {
+ printk(" --> Using block cache clean+invalidate\n");
+ cpu_cache.dma_flush_range = blk_dma_flush_range;
+ cpu_cache.flush_kern_dcache_page = blk_flush_kern_dcache_page;
+ }
+
+ return 0;
+}
+
+__initcall(blockops_check);
diff --git a/arch/arm/mm/cache-v3.S b/arch/arm/mm/cache-v3.S
new file mode 100644
index 0000000..e199478
--- /dev/null
+++ b/arch/arm/mm/cache-v3.S
@@ -0,0 +1,137 @@
+/*
+ * linux/arch/arm/mm/cache-v3.S
+ *
+ * Copyright (C) 1997-2002 Russell king
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/hardware.h>
+#include <asm/page.h>
+#include "proc-macros.S"
+
+/*
+ * flush_user_cache_all()
+ *
+ * Invalidate all cache entries in a particular address
+ * space.
+ *
+ * - mm - mm_struct describing address space
+ */
+ENTRY(v3_flush_user_cache_all)
+ /* FALLTHROUGH */
+/*
+ * flush_kern_cache_all()
+ *
+ * Clean and invalidate the entire cache.
+ */
+ENTRY(v3_flush_kern_cache_all)
+ /* FALLTHROUGH */
+
+/*
+ * flush_user_cache_range(start, end, flags)
+ *
+ * Invalidate a range of cache entries in the specified
+ * address space.
+ *
+ * - start - start address (may not be aligned)
+ * - end - end address (exclusive, may not be aligned)
+ * - flags - vma_area_struct flags describing address space
+ */
+ENTRY(v3_flush_user_cache_range)
+ mov ip, #0
+ mcreq p15, 0, ip, c7, c0, 0 @ flush ID cache
+ mov pc, lr
+
+/*
+ * coherent_kern_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(v3_coherent_kern_range)
+ /* FALLTHROUGH */
+
+/*
+ * coherent_user_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(v3_coherent_user_range)
+ mov pc, lr
+
+/*
+ * flush_kern_dcache_page(void *page)
+ *
+ * Ensure no D cache aliasing occurs, either with itself or
+ * the I cache
+ *
+ * - addr - page aligned address
+ */
+ENTRY(v3_flush_kern_dcache_page)
+ /* FALLTHROUGH */
+
+/*
+ * dma_inv_range(start, end)
+ *
+ * Invalidate (discard) the specified virtual address range.
+ * May not write back any entries. If 'start' or 'end'
+ * are not cache line aligned, those lines must be written
+ * back.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(v3_dma_inv_range)
+ /* FALLTHROUGH */
+
+/*
+ * dma_flush_range(start, end)
+ *
+ * Clean and invalidate the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(v3_dma_flush_range)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c0, 0 @ flush ID cache
+ /* FALLTHROUGH */
+
+/*
+ * dma_clean_range(start, end)
+ *
+ * Clean (write back) the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(v3_dma_clean_range)
+ mov pc, lr
+
+ __INITDATA
+
+ .type v3_cache_fns, #object
+ENTRY(v3_cache_fns)
+ .long v3_flush_kern_cache_all
+ .long v3_flush_user_cache_all
+ .long v3_flush_user_cache_range
+ .long v3_coherent_kern_range
+ .long v3_coherent_user_range
+ .long v3_flush_kern_dcache_page
+ .long v3_dma_inv_range
+ .long v3_dma_clean_range
+ .long v3_dma_flush_range
+ .size v3_cache_fns, . - v3_cache_fns
diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S
new file mode 100644
index 0000000..b8ad5d5
--- /dev/null
+++ b/arch/arm/mm/cache-v4.S
@@ -0,0 +1,139 @@
+/*
+ * linux/arch/arm/mm/cache-v4.S
+ *
+ * Copyright (C) 1997-2002 Russell king
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/hardware.h>
+#include <asm/page.h>
+#include "proc-macros.S"
+
+/*
+ * flush_user_cache_all()
+ *
+ * Invalidate all cache entries in a particular address
+ * space.
+ *
+ * - mm - mm_struct describing address space
+ */
+ENTRY(v4_flush_user_cache_all)
+ /* FALLTHROUGH */
+/*
+ * flush_kern_cache_all()
+ *
+ * Clean and invalidate the entire cache.
+ */
+ENTRY(v4_flush_kern_cache_all)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7, 0 @ flush ID cache
+ mov pc, lr
+
+/*
+ * flush_user_cache_range(start, end, flags)
+ *
+ * Invalidate a range of cache entries in the specified
+ * address space.
+ *
+ * - start - start address (may not be aligned)
+ * - end - end address (exclusive, may not be aligned)
+ * - flags - vma_area_struct flags describing address space
+ */
+ENTRY(v4_flush_user_cache_range)
+ mov ip, #0
+ mcreq p15, 0, ip, c7, c7, 0 @ flush ID cache
+ mov pc, lr
+
+/*
+ * coherent_kern_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(v4_coherent_kern_range)
+ /* FALLTHROUGH */
+
+/*
+ * coherent_user_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(v4_coherent_user_range)
+ mov pc, lr
+
+/*
+ * flush_kern_dcache_page(void *page)
+ *
+ * Ensure no D cache aliasing occurs, either with itself or
+ * the I cache
+ *
+ * - addr - page aligned address
+ */
+ENTRY(v4_flush_kern_dcache_page)
+ /* FALLTHROUGH */
+
+/*
+ * dma_inv_range(start, end)
+ *
+ * Invalidate (discard) the specified virtual address range.
+ * May not write back any entries. If 'start' or 'end'
+ * are not cache line aligned, those lines must be written
+ * back.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(v4_dma_inv_range)
+ /* FALLTHROUGH */
+
+/*
+ * dma_flush_range(start, end)
+ *
+ * Clean and invalidate the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(v4_dma_flush_range)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7, 0 @ flush ID cache
+ /* FALLTHROUGH */
+
+/*
+ * dma_clean_range(start, end)
+ *
+ * Clean (write back) the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(v4_dma_clean_range)
+ mov pc, lr
+
+ __INITDATA
+
+ .type v4_cache_fns, #object
+ENTRY(v4_cache_fns)
+ .long v4_flush_kern_cache_all
+ .long v4_flush_user_cache_all
+ .long v4_flush_user_cache_range
+ .long v4_coherent_kern_range
+ .long v4_coherent_user_range
+ .long v4_flush_kern_dcache_page
+ .long v4_dma_inv_range
+ .long v4_dma_clean_range
+ .long v4_dma_flush_range
+ .size v4_cache_fns, . - v4_cache_fns
diff --git a/arch/arm/mm/cache-v4wb.S b/arch/arm/mm/cache-v4wb.S
new file mode 100644
index 0000000..5c4055b
--- /dev/null
+++ b/arch/arm/mm/cache-v4wb.S
@@ -0,0 +1,216 @@
+/*
+ * linux/arch/arm/mm/cache-v4wb.S
+ *
+ * Copyright (C) 1997-2002 Russell king
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/hardware.h>
+#include <asm/page.h>
+#include "proc-macros.S"
+
+/*
+ * The size of one data cache line.
+ */
+#define CACHE_DLINESIZE 32
+
+/*
+ * The total size of the data cache.
+ */
+#if defined(CONFIG_CPU_SA110)
+# define CACHE_DSIZE 16384
+#elif defined(CONFIG_CPU_SA1100)
+# define CACHE_DSIZE 8192
+#else
+# error Unknown cache size
+#endif
+
+/*
+ * This is the size at which it becomes more efficient to
+ * clean the whole cache, rather than using the individual
+ * cache line maintainence instructions.
+ *
+ * Size Clean (ticks) Dirty (ticks)
+ * 4096 21 20 21 53 55 54
+ * 8192 40 41 40 106 100 102
+ * 16384 77 77 76 140 140 138
+ * 32768 150 149 150 214 216 212 <---
+ * 65536 296 297 296 351 358 361
+ * 131072 591 591 591 656 657 651
+ * Whole 132 136 132 221 217 207 <---
+ */
+#define CACHE_DLIMIT (CACHE_DSIZE * 4)
+
+/*
+ * flush_user_cache_all()
+ *
+ * Clean and invalidate all cache entries in a particular address
+ * space.
+ */
+ENTRY(v4wb_flush_user_cache_all)
+ /* FALLTHROUGH */
+/*
+ * flush_kern_cache_all()
+ *
+ * Clean and invalidate the entire cache.
+ */
+ENTRY(v4wb_flush_kern_cache_all)
+ mov ip, #0
+ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
+__flush_whole_cache:
+ mov r0, #FLUSH_BASE
+ add r1, r0, #CACHE_DSIZE
+1: ldr r2, [r0], #32
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, ip, c7, c10, 4 @ drain write buffer
+ mov pc, lr
+
+/*
+ * flush_user_cache_range(start, end, flags)
+ *
+ * Invalidate a range of cache entries in the specified
+ * address space.
+ *
+ * - start - start address (inclusive, page aligned)
+ * - end - end address (exclusive, page aligned)
+ * - flags - vma_area_struct flags describing address space
+ */
+ENTRY(v4wb_flush_user_cache_range)
+ sub r3, r1, r0 @ calculate total size
+ tst r2, #VM_EXEC @ executable region?
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
+
+ cmp r3, #CACHE_DLIMIT @ total size >= limit?
+ bhs __flush_whole_cache @ flush whole D cache
+
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c10, 4 @ drain write buffer
+ mov pc, lr
+
+/*
+ * flush_kern_dcache_page(void *page)
+ *
+ * Ensure no D cache aliasing occurs, either with itself or
+ * the I cache
+ *
+ * - addr - page aligned address
+ */
+ENTRY(v4wb_flush_kern_dcache_page)
+ add r1, r0, #PAGE_SZ
+ /* fall through */
+
+/*
+ * coherent_kern_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(v4wb_coherent_kern_range)
+ /* fall through */
+
+/*
+ * coherent_user_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(v4wb_coherent_user_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mov ip, #0
+ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+
+/*
+ * dma_inv_range(start, end)
+ *
+ * Invalidate (discard) the specified virtual address range.
+ * May not write back any entries. If 'start' or 'end'
+ * are not cache line aligned, those lines must be written
+ * back.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(v4wb_dma_inv_range)
+ tst r0, #CACHE_DLINESIZE - 1
+ bic r0, r0, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
+ tst r1, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
+1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ mov pc, lr
+
+/*
+ * dma_clean_range(start, end)
+ *
+ * Clean (write back) the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(v4wb_dma_clean_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ mov pc, lr
+
+/*
+ * dma_flush_range(start, end)
+ *
+ * Clean and invalidate the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * This is actually the same as v4wb_coherent_kern_range()
+ */
+ .globl v4wb_dma_flush_range
+ .set v4wb_dma_flush_range, v4wb_coherent_kern_range
+
+ __INITDATA
+
+ .type v4wb_cache_fns, #object
+ENTRY(v4wb_cache_fns)
+ .long v4wb_flush_kern_cache_all
+ .long v4wb_flush_user_cache_all
+ .long v4wb_flush_user_cache_range
+ .long v4wb_coherent_kern_range
+ .long v4wb_coherent_user_range
+ .long v4wb_flush_kern_dcache_page
+ .long v4wb_dma_inv_range
+ .long v4wb_dma_clean_range
+ .long v4wb_dma_flush_range
+ .size v4wb_cache_fns, . - v4wb_cache_fns
diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S
new file mode 100644
index 0000000..9bcabd8
--- /dev/null
+++ b/arch/arm/mm/cache-v4wt.S
@@ -0,0 +1,188 @@
+/*
+ * linux/arch/arm/mm/cache-v4wt.S
+ *
+ * Copyright (C) 1997-2002 Russell king
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * ARMv4 write through cache operations support.
+ *
+ * We assume that the write buffer is not enabled.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/hardware.h>
+#include <asm/page.h>
+#include "proc-macros.S"
+
+/*
+ * The size of one data cache line.
+ */
+#define CACHE_DLINESIZE 32
+
+/*
+ * The number of data cache segments.
+ */
+#define CACHE_DSEGMENTS 8
+
+/*
+ * The number of lines in a cache segment.
+ */
+#define CACHE_DENTRIES 64
+
+/*
+ * This is the size at which it becomes more efficient to
+ * clean the whole cache, rather than using the individual
+ * cache line maintainence instructions.
+ *
+ * *** This needs benchmarking
+ */
+#define CACHE_DLIMIT 16384
+
+/*
+ * flush_user_cache_all()
+ *
+ * Invalidate all cache entries in a particular address
+ * space.
+ */
+ENTRY(v4wt_flush_user_cache_all)
+ /* FALLTHROUGH */
+/*
+ * flush_kern_cache_all()
+ *
+ * Clean and invalidate the entire cache.
+ */
+ENTRY(v4wt_flush_kern_cache_all)
+ mov r2, #VM_EXEC
+ mov ip, #0
+__flush_whole_cache:
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
+ mov pc, lr
+
+/*
+ * flush_user_cache_range(start, end, flags)
+ *
+ * Clean and invalidate a range of cache entries in the specified
+ * address space.
+ *
+ * - start - start address (inclusive, page aligned)
+ * - end - end address (exclusive, page aligned)
+ * - flags - vma_area_struct flags describing address space
+ */
+ENTRY(v4wt_flush_user_cache_range)
+ sub r3, r1, r0 @ calculate total size
+ cmp r3, #CACHE_DLIMIT
+ bhs __flush_whole_cache
+
+1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ tst r2, #VM_EXEC
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mov pc, lr
+
+/*
+ * coherent_kern_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(v4wt_coherent_kern_range)
+ /* FALLTRHOUGH */
+
+/*
+ * coherent_user_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(v4wt_coherent_user_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mov pc, lr
+
+/*
+ * flush_kern_dcache_page(void *page)
+ *
+ * Ensure no D cache aliasing occurs, either with itself or
+ * the I cache
+ *
+ * - addr - page aligned address
+ */
+ENTRY(v4wt_flush_kern_dcache_page)
+ mov r2, #0
+ mcr p15, 0, r2, c7, c5, 0 @ invalidate I cache
+ add r1, r0, #PAGE_SZ
+ /* fallthrough */
+
+/*
+ * dma_inv_range(start, end)
+ *
+ * Invalidate (discard) the specified virtual address range.
+ * May not write back any entries. If 'start' or 'end'
+ * are not cache line aligned, those lines must be written
+ * back.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(v4wt_dma_inv_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ /* FALLTHROUGH */
+
+/*
+ * dma_clean_range(start, end)
+ *
+ * Clean the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(v4wt_dma_clean_range)
+ mov pc, lr
+
+/*
+ * dma_flush_range(start, end)
+ *
+ * Clean and invalidate the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ .globl v4wt_dma_flush_range
+ .equ v4wt_dma_flush_range, v4wt_dma_inv_range
+
+ __INITDATA
+
+ .type v4wt_cache_fns, #object
+ENTRY(v4wt_cache_fns)
+ .long v4wt_flush_kern_cache_all
+ .long v4wt_flush_user_cache_all
+ .long v4wt_flush_user_cache_range
+ .long v4wt_coherent_kern_range
+ .long v4wt_coherent_user_range
+ .long v4wt_flush_kern_dcache_page
+ .long v4wt_dma_inv_range
+ .long v4wt_dma_clean_range
+ .long v4wt_dma_flush_range
+ .size v4wt_cache_fns, . - v4wt_cache_fns
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
new file mode 100644
index 0000000..85c10a7
--- /dev/null
+++ b/arch/arm/mm/cache-v6.S
@@ -0,0 +1,227 @@
+/*
+ * linux/arch/arm/mm/cache-v6.S
+ *
+ * Copyright (C) 2001 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This is the "shell" of the ARMv6 processor support.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+
+#include "proc-macros.S"
+
+#define HARVARD_CACHE
+#define CACHE_LINE_SIZE 32
+#define D_CACHE_LINE_SIZE 32
+
+/*
+ * v6_flush_cache_all()
+ *
+ * Flush the entire cache.
+ *
+ * It is assumed that:
+ */
+ENTRY(v6_flush_kern_cache_all)
+ mov r0, #0
+#ifdef HARVARD_CACHE
+ mcr p15, 0, r0, c7, c14, 0 @ D cache clean+invalidate
+ mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate
+#else
+ mcr p15, 0, r0, c7, c15, 0 @ Cache clean+invalidate
+#endif
+ mov pc, lr
+
+/*
+ * v6_flush_cache_all()
+ *
+ * Flush all TLB entries in a particular address space
+ *
+ * - mm - mm_struct describing address space
+ */
+ENTRY(v6_flush_user_cache_all)
+ /*FALLTHROUGH*/
+
+/*
+ * v6_flush_cache_range(start, end, flags)
+ *
+ * Flush a range of TLB entries in the specified address space.
+ *
+ * - start - start address (may not be aligned)
+ * - end - end address (exclusive, may not be aligned)
+ * - flags - vm_area_struct flags describing address space
+ *
+ * It is assumed that:
+ * - we have a VIPT cache.
+ */
+ENTRY(v6_flush_user_cache_range)
+ mov pc, lr
+
+/*
+ * v6_coherent_kern_range(start,end)
+ *
+ * Ensure that the I and D caches are coherent within specified
+ * region. This is typically used when code has been written to
+ * a memory region, and will be executed.
+ *
+ * - start - virtual start address of region
+ * - end - virtual end address of region
+ *
+ * It is assumed that:
+ * - the Icache does not read data from the write buffer
+ */
+ENTRY(v6_coherent_kern_range)
+ /* FALLTHROUGH */
+
+/*
+ * v6_coherent_user_range(start,end)
+ *
+ * Ensure that the I and D caches are coherent within specified
+ * region. This is typically used when code has been written to
+ * a memory region, and will be executed.
+ *
+ * - start - virtual start address of region
+ * - end - virtual end address of region
+ *
+ * It is assumed that:
+ * - the Icache does not read data from the write buffer
+ */
+ENTRY(v6_coherent_user_range)
+ bic r0, r0, #CACHE_LINE_SIZE - 1
+1:
+#ifdef HARVARD_CACHE
+ mcr p15, 0, r0, c7, c10, 1 @ clean D line
+ mcr p15, 0, r0, c7, c5, 1 @ invalidate I line
+#endif
+ mcr p15, 0, r0, c7, c5, 7 @ invalidate BTB entry
+ add r0, r0, #CACHE_LINE_SIZE
+ cmp r0, r1
+ blo 1b
+#ifdef HARVARD_CACHE
+ mov r0, #0
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+#endif
+ mov pc, lr
+
+/*
+ * v6_flush_kern_dcache_page(kaddr)
+ *
+ * Ensure that the data held in the page kaddr is written back
+ * to the page in question.
+ *
+ * - kaddr - kernel address (guaranteed to be page aligned)
+ */
+ENTRY(v6_flush_kern_dcache_page)
+ add r1, r0, #PAGE_SZ
+1:
+#ifdef HARVARD_CACHE
+ mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line
+#else
+ mcr p15, 0, r0, c7, c15, 1 @ clean & invalidate unified line
+#endif
+ add r0, r0, #D_CACHE_LINE_SIZE
+ cmp r0, r1
+ blo 1b
+#ifdef HARVARD_CACHE
+ mov r0, #0
+ mcr p15, 0, r0, c7, c10, 4
+#endif
+ mov pc, lr
+
+
+/*
+ * v6_dma_inv_range(start,end)
+ *
+ * Invalidate the data cache within the specified region; we will
+ * be performing a DMA operation in this region and we want to
+ * purge old data in the cache.
+ *
+ * - start - virtual start address of region
+ * - end - virtual end address of region
+ */
+ENTRY(v6_dma_inv_range)
+ tst r0, #D_CACHE_LINE_SIZE - 1
+ bic r0, r0, #D_CACHE_LINE_SIZE - 1
+#ifdef HARVARD_CACHE
+ mcrne p15, 0, r0, c7, c10, 1 @ clean D line
+#else
+ mcrne p15, 0, r0, c7, c11, 1 @ clean unified line
+#endif
+ tst r1, #D_CACHE_LINE_SIZE - 1
+ bic r1, r1, #D_CACHE_LINE_SIZE - 1
+#ifdef HARVARD_CACHE
+ mcrne p15, 0, r1, c7, c14, 1 @ clean & invalidate D line
+#else
+ mcrne p15, 0, r1, c7, c15, 1 @ clean & invalidate unified line
+#endif
+1:
+#ifdef HARVARD_CACHE
+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D line
+#else
+ mcr p15, 0, r0, c7, c7, 1 @ invalidate unified line
+#endif
+ add r0, r0, #D_CACHE_LINE_SIZE
+ cmp r0, r1
+ blo 1b
+ mov r0, #0
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ mov pc, lr
+
+/*
+ * v6_dma_clean_range(start,end)
+ * - start - virtual start address of region
+ * - end - virtual end address of region
+ */
+ENTRY(v6_dma_clean_range)
+ bic r0, r0, #D_CACHE_LINE_SIZE - 1
+1:
+#ifdef HARVARD_CACHE
+ mcr p15, 0, r0, c7, c10, 1 @ clean D line
+#else
+ mcr p15, 0, r0, c7, c11, 1 @ clean unified line
+#endif
+ add r0, r0, #D_CACHE_LINE_SIZE
+ cmp r0, r1
+ blo 1b
+ mov r0, #0
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ mov pc, lr
+
+/*
+ * v6_dma_flush_range(start,end)
+ * - start - virtual start address of region
+ * - end - virtual end address of region
+ */
+ENTRY(v6_dma_flush_range)
+ bic r0, r0, #D_CACHE_LINE_SIZE - 1
+1:
+#ifdef HARVARD_CACHE
+ mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line
+#else
+ mcr p15, 0, r0, c7, c15, 1 @ clean & invalidate line
+#endif
+ add r0, r0, #D_CACHE_LINE_SIZE
+ cmp r0, r1
+ blo 1b
+ mov r0, #0
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ mov pc, lr
+
+ __INITDATA
+
+ .type v6_cache_fns, #object
+ENTRY(v6_cache_fns)
+ .long v6_flush_kern_cache_all
+ .long v6_flush_user_cache_all
+ .long v6_flush_user_cache_range
+ .long v6_coherent_kern_range
+ .long v6_coherent_user_range
+ .long v6_flush_kern_dcache_page
+ .long v6_dma_inv_range
+ .long v6_dma_clean_range
+ .long v6_dma_flush_range
+ .size v6_cache_fns, . - v6_cache_fns
diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c
new file mode 100644
index 0000000..26356ce
--- /dev/null
+++ b/arch/arm/mm/consistent.c
@@ -0,0 +1,451 @@
+/*
+ * linux/arch/arm/mm/consistent.c
+ *
+ * Copyright (C) 2000-2004 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * DMA uncached mapping support.
+ */
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/tlbflush.h>
+
+#define CONSISTENT_BASE (0xffc00000)
+#define CONSISTENT_END (0xffe00000)
+#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
+
+/*
+ * This is the page table (2MB) covering uncached, DMA consistent allocations
+ */
+static pte_t *consistent_pte;
+static DEFINE_SPINLOCK(consistent_lock);
+
+/*
+ * VM region handling support.
+ *
+ * This should become something generic, handling VM region allocations for
+ * vmalloc and similar (ioremap, module space, etc).
+ *
+ * I envisage vmalloc()'s supporting vm_struct becoming:
+ *
+ * struct vm_struct {
+ * struct vm_region region;
+ * unsigned long flags;
+ * struct page **pages;
+ * unsigned int nr_pages;
+ * unsigned long phys_addr;
+ * };
+ *
+ * get_vm_area() would then call vm_region_alloc with an appropriate
+ * struct vm_region head (eg):
+ *
+ * struct vm_region vmalloc_head = {
+ * .vm_list = LIST_HEAD_INIT(vmalloc_head.vm_list),
+ * .vm_start = VMALLOC_START,
+ * .vm_end = VMALLOC_END,
+ * };
+ *
+ * However, vmalloc_head.vm_start is variable (typically, it is dependent on
+ * the amount of RAM found at boot time.) I would imagine that get_vm_area()
+ * would have to initialise this each time prior to calling vm_region_alloc().
+ */
+struct vm_region {
+ struct list_head vm_list;
+ unsigned long vm_start;
+ unsigned long vm_end;
+ struct page *vm_pages;
+};
+
+static struct vm_region consistent_head = {
+ .vm_list = LIST_HEAD_INIT(consistent_head.vm_list),
+ .vm_start = CONSISTENT_BASE,
+ .vm_end = CONSISTENT_END,
+};
+
+static struct vm_region *
+vm_region_alloc(struct vm_region *head, size_t size, int gfp)
+{
+ unsigned long addr = head->vm_start, end = head->vm_end - size;
+ unsigned long flags;
+ struct vm_region *c, *new;
+
+ new = kmalloc(sizeof(struct vm_region), gfp);
+ if (!new)
+ goto out;
+
+ spin_lock_irqsave(&consistent_lock, flags);
+
+ list_for_each_entry(c, &head->vm_list, vm_list) {
+ if ((addr + size) < addr)
+ goto nospc;
+ if ((addr + size) <= c->vm_start)
+ goto found;
+ addr = c->vm_end;
+ if (addr > end)
+ goto nospc;
+ }
+
+ found:
+ /*
+ * Insert this entry _before_ the one we found.
+ */
+ list_add_tail(&new->vm_list, &c->vm_list);
+ new->vm_start = addr;
+ new->vm_end = addr + size;
+
+ spin_unlock_irqrestore(&consistent_lock, flags);
+ return new;
+
+ nospc:
+ spin_unlock_irqrestore(&consistent_lock, flags);
+ kfree(new);
+ out:
+ return NULL;
+}
+
+static struct vm_region *vm_region_find(struct vm_region *head, unsigned long addr)
+{
+ struct vm_region *c;
+
+ list_for_each_entry(c, &head->vm_list, vm_list) {
+ if (c->vm_start == addr)
+ goto out;
+ }
+ c = NULL;
+ out:
+ return c;
+}
+
+#ifdef CONFIG_HUGETLB_PAGE
+#error ARM Coherent DMA allocator does not (yet) support huge TLB
+#endif
+
+static void *
+__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, int gfp,
+ pgprot_t prot)
+{
+ struct page *page;
+ struct vm_region *c;
+ unsigned long order;
+ u64 mask = ISA_DMA_THRESHOLD, limit;
+
+ if (!consistent_pte) {
+ printk(KERN_ERR "%s: not initialised\n", __func__);
+ dump_stack();
+ return NULL;
+ }
+
+ if (dev) {
+ mask = dev->coherent_dma_mask;
+
+ /*
+ * Sanity check the DMA mask - it must be non-zero, and
+ * must be able to be satisfied by a DMA allocation.
+ */
+ if (mask == 0) {
+ dev_warn(dev, "coherent DMA mask is unset\n");
+ goto no_page;
+ }
+
+ if ((~mask) & ISA_DMA_THRESHOLD) {
+ dev_warn(dev, "coherent DMA mask %#llx is smaller "
+ "than system GFP_DMA mask %#llx\n",
+ mask, (unsigned long long)ISA_DMA_THRESHOLD);
+ goto no_page;
+ }
+ }
+
+ /*
+ * Sanity check the allocation size.
+ */
+ size = PAGE_ALIGN(size);
+ limit = (mask + 1) & ~mask;
+ if ((limit && size >= limit) ||
+ size >= (CONSISTENT_END - CONSISTENT_BASE)) {
+ printk(KERN_WARNING "coherent allocation too big "
+ "(requested %#x mask %#llx)\n", size, mask);
+ goto no_page;
+ }
+
+ order = get_order(size);
+
+ if (mask != 0xffffffff)
+ gfp |= GFP_DMA;
+
+ page = alloc_pages(gfp, order);
+ if (!page)
+ goto no_page;
+
+ /*
+ * Invalidate any data that might be lurking in the
+ * kernel direct-mapped region for device DMA.
+ */
+ {
+ unsigned long kaddr = (unsigned long)page_address(page);
+ memset(page_address(page), 0, size);
+ dmac_flush_range(kaddr, kaddr + size);
+ }
+
+ /*
+ * Allocate a virtual address in the consistent mapping region.
+ */
+ c = vm_region_alloc(&consistent_head, size,
+ gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
+ if (c) {
+ pte_t *pte = consistent_pte + CONSISTENT_OFFSET(c->vm_start);
+ struct page *end = page + (1 << order);
+
+ c->vm_pages = page;
+
+ /*
+ * Set the "dma handle"
+ */
+ *handle = page_to_dma(dev, page);
+
+ do {
+ BUG_ON(!pte_none(*pte));
+
+ set_page_count(page, 1);
+ /*
+ * x86 does not mark the pages reserved...
+ */
+ SetPageReserved(page);
+ set_pte(pte, mk_pte(page, prot));
+ page++;
+ pte++;
+ } while (size -= PAGE_SIZE);
+
+ /*
+ * Free the otherwise unused pages.
+ */
+ while (page < end) {
+ set_page_count(page, 1);
+ __free_page(page);
+ page++;
+ }
+
+ return (void *)c->vm_start;
+ }
+
+ if (page)
+ __free_pages(page, order);
+ no_page:
+ *handle = ~0;
+ return NULL;
+}
+
+/*
+ * Allocate DMA-coherent memory space and return both the kernel remapped
+ * virtual and bus address for that space.
+ */
+void *
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, int gfp)
+{
+ return __dma_alloc(dev, size, handle, gfp,
+ pgprot_noncached(pgprot_kernel));
+}
+EXPORT_SYMBOL(dma_alloc_coherent);
+
+/*
+ * Allocate a writecombining region, in much the same way as
+ * dma_alloc_coherent above.
+ */
+void *
+dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, int gfp)
+{
+ return __dma_alloc(dev, size, handle, gfp,
+ pgprot_writecombine(pgprot_kernel));
+}
+EXPORT_SYMBOL(dma_alloc_writecombine);
+
+static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
+ void *cpu_addr, dma_addr_t dma_addr, size_t size)
+{
+ unsigned long flags, user_size, kern_size;
+ struct vm_region *c;
+ int ret = -ENXIO;
+
+ user_size = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
+
+ spin_lock_irqsave(&consistent_lock, flags);
+ c = vm_region_find(&consistent_head, (unsigned long)cpu_addr);
+ spin_unlock_irqrestore(&consistent_lock, flags);
+
+ if (c) {
+ unsigned long off = vma->vm_pgoff;
+
+ kern_size = (c->vm_end - c->vm_start) >> PAGE_SHIFT;
+
+ if (off < kern_size &&
+ user_size <= (kern_size - off)) {
+ vma->vm_flags |= VM_RESERVED;
+ ret = remap_pfn_range(vma, vma->vm_start,
+ page_to_pfn(c->vm_pages) + off,
+ user_size << PAGE_SHIFT,
+ vma->vm_page_prot);
+ }
+ }
+
+ return ret;
+}
+
+int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
+ void *cpu_addr, dma_addr_t dma_addr, size_t size)
+{
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+ return dma_mmap(dev, vma, cpu_addr, dma_addr, size);
+}
+EXPORT_SYMBOL(dma_mmap_coherent);
+
+int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma,
+ void *cpu_addr, dma_addr_t dma_addr, size_t size)
+{
+ vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+ return dma_mmap(dev, vma, cpu_addr, dma_addr, size);
+}
+EXPORT_SYMBOL(dma_mmap_writecombine);
+
+/*
+ * free a page as defined by the above mapping.
+ */
+void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
+{
+ struct vm_region *c;
+ unsigned long flags, addr;
+ pte_t *ptep;
+
+ size = PAGE_ALIGN(size);
+
+ spin_lock_irqsave(&consistent_lock, flags);
+
+ c = vm_region_find(&consistent_head, (unsigned long)cpu_addr);
+ if (!c)
+ goto no_area;
+
+ if ((c->vm_end - c->vm_start) != size) {
+ printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
+ __func__, c->vm_end - c->vm_start, size);
+ dump_stack();
+ size = c->vm_end - c->vm_start;
+ }
+
+ ptep = consistent_pte + CONSISTENT_OFFSET(c->vm_start);
+ addr = c->vm_start;
+ do {
+ pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep);
+ unsigned long pfn;
+
+ ptep++;
+ addr += PAGE_SIZE;
+
+ if (!pte_none(pte) && pte_present(pte)) {
+ pfn = pte_pfn(pte);
+
+ if (pfn_valid(pfn)) {
+ struct page *page = pfn_to_page(pfn);
+
+ /*
+ * x86 does not mark the pages reserved...
+ */
+ ClearPageReserved(page);
+
+ __free_page(page);
+ continue;
+ }
+ }
+
+ printk(KERN_CRIT "%s: bad page in kernel page table\n",
+ __func__);
+ } while (size -= PAGE_SIZE);
+
+ flush_tlb_kernel_range(c->vm_start, c->vm_end);
+
+ list_del(&c->vm_list);
+
+ spin_unlock_irqrestore(&consistent_lock, flags);
+
+ kfree(c);
+ return;
+
+ no_area:
+ spin_unlock_irqrestore(&consistent_lock, flags);
+ printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n",
+ __func__, cpu_addr);
+ dump_stack();
+}
+EXPORT_SYMBOL(dma_free_coherent);
+
+/*
+ * Initialise the consistent memory allocation.
+ */
+static int __init consistent_init(void)
+{
+ pgd_t *pgd;
+ pmd_t *pmd;
+ pte_t *pte;
+ int ret = 0;
+
+ spin_lock(&init_mm.page_table_lock);
+
+ do {
+ pgd = pgd_offset(&init_mm, CONSISTENT_BASE);
+ pmd = pmd_alloc(&init_mm, pgd, CONSISTENT_BASE);
+ if (!pmd) {
+ printk(KERN_ERR "%s: no pmd tables\n", __func__);
+ ret = -ENOMEM;
+ break;
+ }
+ WARN_ON(!pmd_none(*pmd));
+
+ pte = pte_alloc_kernel(&init_mm, pmd, CONSISTENT_BASE);
+ if (!pte) {
+ printk(KERN_ERR "%s: no pte tables\n", __func__);
+ ret = -ENOMEM;
+ break;
+ }
+
+ consistent_pte = pte;
+ } while (0);
+
+ spin_unlock(&init_mm.page_table_lock);
+
+ return ret;
+}
+
+core_initcall(consistent_init);
+
+/*
+ * Make an area consistent for devices.
+ */
+void consistent_sync(void *vaddr, size_t size, int direction)
+{
+ unsigned long start = (unsigned long)vaddr;
+ unsigned long end = start + size;
+
+ switch (direction) {
+ case DMA_FROM_DEVICE: /* invalidate only */
+ dmac_inv_range(start, end);
+ break;
+ case DMA_TO_DEVICE: /* writeback only */
+ dmac_clean_range(start, end);
+ break;
+ case DMA_BIDIRECTIONAL: /* writeback and invalidate */
+ dmac_flush_range(start, end);
+ break;
+ default:
+ BUG();
+ }
+}
+EXPORT_SYMBOL(consistent_sync);
diff --git a/arch/arm/mm/copypage-v3.S b/arch/arm/mm/copypage-v3.S
new file mode 100644
index 0000000..4940f19
--- /dev/null
+++ b/arch/arm/mm/copypage-v3.S
@@ -0,0 +1,67 @@
+/*
+ * linux/arch/arm/lib/copypage.S
+ *
+ * Copyright (C) 1995-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * ASM optimised string functions
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/constants.h>
+
+ .text
+ .align 5
+/*
+ * ARMv3 optimised copy_user_page
+ *
+ * FIXME: do we need to handle cache stuff...
+ */
+ENTRY(v3_copy_user_page)
+ stmfd sp!, {r4, lr} @ 2
+ mov r2, #PAGE_SZ/64 @ 1
+ ldmia r1!, {r3, r4, ip, lr} @ 4+1
+1: stmia r0!, {r3, r4, ip, lr} @ 4
+ ldmia r1!, {r3, r4, ip, lr} @ 4+1
+ stmia r0!, {r3, r4, ip, lr} @ 4
+ ldmia r1!, {r3, r4, ip, lr} @ 4+1
+ stmia r0!, {r3, r4, ip, lr} @ 4
+ ldmia r1!, {r3, r4, ip, lr} @ 4
+ subs r2, r2, #1 @ 1
+ stmia r0!, {r3, r4, ip, lr} @ 4
+ ldmneia r1!, {r3, r4, ip, lr} @ 4
+ bne 1b @ 1
+ LOADREGS(fd, sp!, {r4, pc}) @ 3
+
+ .align 5
+/*
+ * ARMv3 optimised clear_user_page
+ *
+ * FIXME: do we need to handle cache stuff...
+ */
+ENTRY(v3_clear_user_page)
+ str lr, [sp, #-4]!
+ mov r1, #PAGE_SZ/64 @ 1
+ mov r2, #0 @ 1
+ mov r3, #0 @ 1
+ mov ip, #0 @ 1
+ mov lr, #0 @ 1
+1: stmia r0!, {r2, r3, ip, lr} @ 4
+ stmia r0!, {r2, r3, ip, lr} @ 4
+ stmia r0!, {r2, r3, ip, lr} @ 4
+ stmia r0!, {r2, r3, ip, lr} @ 4
+ subs r1, r1, #1 @ 1
+ bne 1b @ 1
+ ldr pc, [sp], #4
+
+ __INITDATA
+
+ .type v3_user_fns, #object
+ENTRY(v3_user_fns)
+ .long v3_clear_user_page
+ .long v3_copy_user_page
+ .size v3_user_fns, . - v3_user_fns
diff --git a/arch/arm/mm/copypage-v4mc.S b/arch/arm/mm/copypage-v4mc.S
new file mode 100644
index 0000000..305af3d
--- /dev/null
+++ b/arch/arm/mm/copypage-v4mc.S
@@ -0,0 +1,80 @@
+/*
+ * linux/arch/arm/lib/copy_page-armv4mc.S
+ *
+ * Copyright (C) 1995-2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * ASM optimised string functions
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/constants.h>
+
+ .text
+ .align 5
+/*
+ * ARMv4 mini-dcache optimised copy_user_page
+ *
+ * We flush the destination cache lines just before we write the data into the
+ * corresponding address. Since the Dcache is read-allocate, this removes the
+ * Dcache aliasing issue. The writes will be forwarded to the write buffer,
+ * and merged as appropriate.
+ *
+ * Note: We rely on all ARMv4 processors implementing the "invalidate D line"
+ * instruction. If your processor does not supply this, you have to write your
+ * own copy_user_page that does the right thing.
+ */
+ENTRY(v4_mc_copy_user_page)
+ stmfd sp!, {r4, lr} @ 2
+ mov r4, r0
+ mov r0, r1
+ bl map_page_minicache
+ mov r1, #PAGE_SZ/64 @ 1
+ ldmia r0!, {r2, r3, ip, lr} @ 4
+1: mcr p15, 0, r4, c7, c6, 1 @ 1 invalidate D line
+ stmia r4!, {r2, r3, ip, lr} @ 4
+ ldmia r0!, {r2, r3, ip, lr} @ 4+1
+ stmia r4!, {r2, r3, ip, lr} @ 4
+ ldmia r0!, {r2, r3, ip, lr} @ 4
+ mcr p15, 0, r4, c7, c6, 1 @ 1 invalidate D line
+ stmia r4!, {r2, r3, ip, lr} @ 4
+ ldmia r0!, {r2, r3, ip, lr} @ 4
+ subs r1, r1, #1 @ 1
+ stmia r4!, {r2, r3, ip, lr} @ 4
+ ldmneia r0!, {r2, r3, ip, lr} @ 4
+ bne 1b @ 1
+ ldmfd sp!, {r4, pc} @ 3
+
+ .align 5
+/*
+ * ARMv4 optimised clear_user_page
+ *
+ * Same story as above.
+ */
+ENTRY(v4_mc_clear_user_page)
+ str lr, [sp, #-4]!
+ mov r1, #PAGE_SZ/64 @ 1
+ mov r2, #0 @ 1
+ mov r3, #0 @ 1
+ mov ip, #0 @ 1
+ mov lr, #0 @ 1
+1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line
+ stmia r0!, {r2, r3, ip, lr} @ 4
+ stmia r0!, {r2, r3, ip, lr} @ 4
+ mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line
+ stmia r0!, {r2, r3, ip, lr} @ 4
+ stmia r0!, {r2, r3, ip, lr} @ 4
+ subs r1, r1, #1 @ 1
+ bne 1b @ 1
+ ldr pc, [sp], #4
+
+ __INITDATA
+
+ .type v4_mc_user_fns, #object
+ENTRY(v4_mc_user_fns)
+ .long v4_mc_clear_user_page
+ .long v4_mc_copy_user_page
+ .size v4_mc_user_fns, . - v4_mc_user_fns
diff --git a/arch/arm/mm/copypage-v4wb.S b/arch/arm/mm/copypage-v4wb.S
new file mode 100644
index 0000000..b94c345
--- /dev/null
+++ b/arch/arm/mm/copypage-v4wb.S
@@ -0,0 +1,79 @@
+/*
+ * linux/arch/arm/lib/copypage.S
+ *
+ * Copyright (C) 1995-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * ASM optimised string functions
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/constants.h>
+
+ .text
+ .align 5
+/*
+ * ARMv4 optimised copy_user_page
+ *
+ * We flush the destination cache lines just before we write the data into the
+ * corresponding address. Since the Dcache is read-allocate, this removes the
+ * Dcache aliasing issue. The writes will be forwarded to the write buffer,
+ * and merged as appropriate.
+ *
+ * Note: We rely on all ARMv4 processors implementing the "invalidate D line"
+ * instruction. If your processor does not supply this, you have to write your
+ * own copy_user_page that does the right thing.
+ */
+ENTRY(v4wb_copy_user_page)
+ stmfd sp!, {r4, lr} @ 2
+ mov r2, #PAGE_SZ/64 @ 1
+ ldmia r1!, {r3, r4, ip, lr} @ 4
+1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line
+ stmia r0!, {r3, r4, ip, lr} @ 4
+ ldmia r1!, {r3, r4, ip, lr} @ 4+1
+ stmia r0!, {r3, r4, ip, lr} @ 4
+ ldmia r1!, {r3, r4, ip, lr} @ 4
+ mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line
+ stmia r0!, {r3, r4, ip, lr} @ 4
+ ldmia r1!, {r3, r4, ip, lr} @ 4
+ subs r2, r2, #1 @ 1
+ stmia r0!, {r3, r4, ip, lr} @ 4
+ ldmneia r1!, {r3, r4, ip, lr} @ 4
+ bne 1b @ 1
+ mcr p15, 0, r1, c7, c10, 4 @ 1 drain WB
+ ldmfd sp!, {r4, pc} @ 3
+
+ .align 5
+/*
+ * ARMv4 optimised clear_user_page
+ *
+ * Same story as above.
+ */
+ENTRY(v4wb_clear_user_page)
+ str lr, [sp, #-4]!
+ mov r1, #PAGE_SZ/64 @ 1
+ mov r2, #0 @ 1
+ mov r3, #0 @ 1
+ mov ip, #0 @ 1
+ mov lr, #0 @ 1
+1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line
+ stmia r0!, {r2, r3, ip, lr} @ 4
+ stmia r0!, {r2, r3, ip, lr} @ 4
+ mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line
+ stmia r0!, {r2, r3, ip, lr} @ 4
+ stmia r0!, {r2, r3, ip, lr} @ 4
+ subs r1, r1, #1 @ 1
+ bne 1b @ 1
+ mcr p15, 0, r1, c7, c10, 4 @ 1 drain WB
+ ldr pc, [sp], #4
+
+ __INITDATA
+
+ .type v4wb_user_fns, #object
+ENTRY(v4wb_user_fns)
+ .long v4wb_clear_user_page
+ .long v4wb_copy_user_page
+ .size v4wb_user_fns, . - v4wb_user_fns
diff --git a/arch/arm/mm/copypage-v4wt.S b/arch/arm/mm/copypage-v4wt.S
new file mode 100644
index 0000000..9767939
--- /dev/null
+++ b/arch/arm/mm/copypage-v4wt.S
@@ -0,0 +1,73 @@
+/*
+ * linux/arch/arm/lib/copypage-v4.S
+ *
+ * Copyright (C) 1995-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * ASM optimised string functions
+ *
+ * This is for CPUs with a writethrough cache and 'flush ID cache' is
+ * the only supported cache operation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/constants.h>
+
+ .text
+ .align 5
+/*
+ * ARMv4 optimised copy_user_page
+ *
+ * Since we have writethrough caches, we don't have to worry about
+ * dirty data in the cache. However, we do have to ensure that
+ * subsequent reads are up to date.
+ */
+ENTRY(v4wt_copy_user_page)
+ stmfd sp!, {r4, lr} @ 2
+ mov r2, #PAGE_SZ/64 @ 1
+ ldmia r1!, {r3, r4, ip, lr} @ 4
+1: stmia r0!, {r3, r4, ip, lr} @ 4
+ ldmia r1!, {r3, r4, ip, lr} @ 4+1
+ stmia r0!, {r3, r4, ip, lr} @ 4
+ ldmia r1!, {r3, r4, ip, lr} @ 4
+ stmia r0!, {r3, r4, ip, lr} @ 4
+ ldmia r1!, {r3, r4, ip, lr} @ 4
+ subs r2, r2, #1 @ 1
+ stmia r0!, {r3, r4, ip, lr} @ 4
+ ldmneia r1!, {r3, r4, ip, lr} @ 4
+ bne 1b @ 1
+ mcr p15, 0, r2, c7, c7, 0 @ flush ID cache
+ ldmfd sp!, {r4, pc} @ 3
+
+ .align 5
+/*
+ * ARMv4 optimised clear_user_page
+ *
+ * Same story as above.
+ */
+ENTRY(v4wt_clear_user_page)
+ str lr, [sp, #-4]!
+ mov r1, #PAGE_SZ/64 @ 1
+ mov r2, #0 @ 1
+ mov r3, #0 @ 1
+ mov ip, #0 @ 1
+ mov lr, #0 @ 1
+1: stmia r0!, {r2, r3, ip, lr} @ 4
+ stmia r0!, {r2, r3, ip, lr} @ 4
+ stmia r0!, {r2, r3, ip, lr} @ 4
+ stmia r0!, {r2, r3, ip, lr} @ 4
+ subs r1, r1, #1 @ 1
+ bne 1b @ 1
+ mcr p15, 0, r2, c7, c7, 0 @ flush ID cache
+ ldr pc, [sp], #4
+
+ __INITDATA
+
+ .type v4wt_user_fns, #object
+ENTRY(v4wt_user_fns)
+ .long v4wt_clear_user_page
+ .long v4wt_copy_user_page
+ .size v4wt_user_fns, . - v4wt_user_fns
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
new file mode 100644
index 0000000..694ac82
--- /dev/null
+++ b/arch/arm/mm/copypage-v6.c
@@ -0,0 +1,155 @@
+/*
+ * linux/arch/arm/mm/copypage-v6.c
+ *
+ * Copyright (C) 2002 Deep Blue Solutions Ltd, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/shmparam.h>
+#include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
+
+#if SHMLBA > 16384
+#error FIX ME
+#endif
+
+#define from_address (0xffff8000)
+#define from_pgprot PAGE_KERNEL
+#define to_address (0xffffc000)
+#define to_pgprot PAGE_KERNEL
+
+static pte_t *from_pte;
+static pte_t *to_pte;
+static DEFINE_SPINLOCK(v6_lock);
+
+#define DCACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
+
+/*
+ * Copy the user page. No aliasing to deal with so we can just
+ * attack the kernel's existing mapping of these pages.
+ */
+void v6_copy_user_page_nonaliasing(void *kto, const void *kfrom, unsigned long vaddr)
+{
+ copy_page(kto, kfrom);
+}
+
+/*
+ * Clear the user page. No aliasing to deal with so we can just
+ * attack the kernel's existing mapping of this page.
+ */
+void v6_clear_user_page_nonaliasing(void *kaddr, unsigned long vaddr)
+{
+ clear_page(kaddr);
+}
+
+/*
+ * Copy the page, taking account of the cache colour.
+ */
+void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned long vaddr)
+{
+ unsigned int offset = DCACHE_COLOUR(vaddr);
+ unsigned long from, to;
+
+ /*
+ * Discard data in the kernel mapping for the new page.
+ * FIXME: needs this MCRR to be supported.
+ */
+ __asm__("mcrr p15, 0, %1, %0, c6 @ 0xec401f06"
+ :
+ : "r" (kto),
+ "r" ((unsigned long)kto + PAGE_SIZE - L1_CACHE_BYTES)
+ : "cc");
+
+ /*
+ * Now copy the page using the same cache colour as the
+ * pages ultimate destination.
+ */
+ spin_lock(&v6_lock);
+
+ set_pte(from_pte + offset, pfn_pte(__pa(kfrom) >> PAGE_SHIFT, from_pgprot));
+ set_pte(to_pte + offset, pfn_pte(__pa(kto) >> PAGE_SHIFT, to_pgprot));
+
+ from = from_address + (offset << PAGE_SHIFT);
+ to = to_address + (offset << PAGE_SHIFT);
+
+ flush_tlb_kernel_page(from);
+ flush_tlb_kernel_page(to);
+
+ copy_page((void *)to, (void *)from);
+
+ spin_unlock(&v6_lock);
+}
+
+/*
+ * Clear the user page. We need to deal with the aliasing issues,
+ * so remap the kernel page into the same cache colour as the user
+ * page.
+ */
+void v6_clear_user_page_aliasing(void *kaddr, unsigned long vaddr)
+{
+ unsigned int offset = DCACHE_COLOUR(vaddr);
+ unsigned long to = to_address + (offset << PAGE_SHIFT);
+
+ /*
+ * Discard data in the kernel mapping for the new page
+ * FIXME: needs this MCRR to be supported.
+ */
+ __asm__("mcrr p15, 0, %1, %0, c6 @ 0xec401f06"
+ :
+ : "r" (kaddr),
+ "r" ((unsigned long)kaddr + PAGE_SIZE - L1_CACHE_BYTES)
+ : "cc");
+
+ /*
+ * Now clear the page using the same cache colour as
+ * the pages ultimate destination.
+ */
+ spin_lock(&v6_lock);
+
+ set_pte(to_pte + offset, pfn_pte(__pa(kaddr) >> PAGE_SHIFT, to_pgprot));
+ flush_tlb_kernel_page(to);
+ clear_page((void *)to);
+
+ spin_unlock(&v6_lock);
+}
+
+struct cpu_user_fns v6_user_fns __initdata = {
+ .cpu_clear_user_page = v6_clear_user_page_nonaliasing,
+ .cpu_copy_user_page = v6_copy_user_page_nonaliasing,
+};
+
+static int __init v6_userpage_init(void)
+{
+ if (cache_is_vipt_aliasing()) {
+ pgd_t *pgd;
+ pmd_t *pmd;
+
+ pgd = pgd_offset_k(from_address);
+ pmd = pmd_alloc(&init_mm, pgd, from_address);
+ if (!pmd)
+ BUG();
+ from_pte = pte_alloc_kernel(&init_mm, pmd, from_address);
+ if (!from_pte)
+ BUG();
+
+ to_pte = pte_alloc_kernel(&init_mm, pmd, to_address);
+ if (!to_pte)
+ BUG();
+
+ cpu_user.cpu_clear_user_page = v6_clear_user_page_aliasing;
+ cpu_user.cpu_copy_user_page = v6_copy_user_page_aliasing;
+ }
+
+ return 0;
+}
+
+__initcall(v6_userpage_init);
+
diff --git a/arch/arm/mm/copypage-xscale.S b/arch/arm/mm/copypage-xscale.S
new file mode 100644
index 0000000..bb27731
--- /dev/null
+++ b/arch/arm/mm/copypage-xscale.S
@@ -0,0 +1,113 @@
+/*
+ * linux/arch/arm/lib/copypage-xscale.S
+ *
+ * Copyright (C) 2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/constants.h>
+
+/*
+ * General note:
+ * We don't really want write-allocate cache behaviour for these functions
+ * since that will just eat through 8K of the cache.
+ */
+
+ .text
+ .align 5
+/*
+ * XScale optimised copy_user_page
+ * r0 = destination
+ * r1 = source
+ * r2 = virtual user address of ultimate destination page
+ *
+ * The source page may have some clean entries in the cache already, but we
+ * can safely ignore them - break_cow() will flush them out of the cache
+ * if we eventually end up using our copied page.
+ *
+ * What we could do is use the mini-cache to buffer reads from the source
+ * page. We rely on the mini-cache being smaller than one page, so we'll
+ * cycle through the complete cache anyway.
+ */
+ENTRY(xscale_mc_copy_user_page)
+ stmfd sp!, {r4, r5, lr}
+ mov r5, r0
+ mov r0, r1
+ bl map_page_minicache
+ mov r1, r5
+ mov lr, #PAGE_SZ/64-1
+
+ /*
+ * Strangely enough, best performance is achieved
+ * when prefetching destination as well. (NP)
+ */
+ pld [r0, #0]
+ pld [r0, #32]
+ pld [r1, #0]
+ pld [r1, #32]
+
+1: pld [r0, #64]
+ pld [r0, #96]
+ pld [r1, #64]
+ pld [r1, #96]
+
+2: ldrd r2, [r0], #8
+ ldrd r4, [r0], #8
+ mov ip, r1
+ strd r2, [r1], #8
+ ldrd r2, [r0], #8
+ strd r4, [r1], #8
+ ldrd r4, [r0], #8
+ strd r2, [r1], #8
+ strd r4, [r1], #8
+ mcr p15, 0, ip, c7, c10, 1 @ clean D line
+ ldrd r2, [r0], #8
+ mcr p15, 0, ip, c7, c6, 1 @ invalidate D line
+ ldrd r4, [r0], #8
+ mov ip, r1
+ strd r2, [r1], #8
+ ldrd r2, [r0], #8
+ strd r4, [r1], #8
+ ldrd r4, [r0], #8
+ strd r2, [r1], #8
+ strd r4, [r1], #8
+ mcr p15, 0, ip, c7, c10, 1 @ clean D line
+ subs lr, lr, #1
+ mcr p15, 0, ip, c7, c6, 1 @ invalidate D line
+ bgt 1b
+ beq 2b
+
+ ldmfd sp!, {r4, r5, pc}
+
+ .align 5
+/*
+ * XScale optimised clear_user_page
+ * r0 = destination
+ * r1 = virtual user address of ultimate destination page
+ */
+ENTRY(xscale_mc_clear_user_page)
+ mov r1, #PAGE_SZ/32
+ mov r2, #0
+ mov r3, #0
+1: mov ip, r0
+ strd r2, [r0], #8
+ strd r2, [r0], #8
+ strd r2, [r0], #8
+ strd r2, [r0], #8
+ mcr p15, 0, ip, c7, c10, 1 @ clean D line
+ subs r1, r1, #1
+ mcr p15, 0, ip, c7, c6, 1 @ invalidate D line
+ bne 1b
+ mov pc, lr
+
+ __INITDATA
+
+ .type xscale_mc_user_fns, #object
+ENTRY(xscale_mc_user_fns)
+ .long xscale_mc_clear_user_page
+ .long xscale_mc_copy_user_page
+ .size xscale_mc_user_fns, . - xscale_mc_user_fns
diff --git a/arch/arm/mm/discontig.c b/arch/arm/mm/discontig.c
new file mode 100644
index 0000000..0d097bb
--- /dev/null
+++ b/arch/arm/mm/discontig.c
@@ -0,0 +1,49 @@
+/*
+ * linux/arch/arm/mm/discontig.c
+ *
+ * Discontiguous memory support.
+ *
+ * Initial code: Copyright (C) 1999-2000 Nicolas Pitre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+
+#if MAX_NUMNODES != 4 && MAX_NUMNODES != 16
+# error Fix Me Please
+#endif
+
+/*
+ * Our node_data structure for discontiguous memory.
+ */
+
+static bootmem_data_t node_bootmem_data[MAX_NUMNODES];
+
+pg_data_t discontig_node_data[MAX_NUMNODES] = {
+ { .bdata = &node_bootmem_data[0] },
+ { .bdata = &node_bootmem_data[1] },
+ { .bdata = &node_bootmem_data[2] },
+ { .bdata = &node_bootmem_data[3] },
+#if MAX_NUMNODES == 16
+ { .bdata = &node_bootmem_data[4] },
+ { .bdata = &node_bootmem_data[5] },
+ { .bdata = &node_bootmem_data[6] },
+ { .bdata = &node_bootmem_data[7] },
+ { .bdata = &node_bootmem_data[8] },
+ { .bdata = &node_bootmem_data[9] },
+ { .bdata = &node_bootmem_data[10] },
+ { .bdata = &node_bootmem_data[11] },
+ { .bdata = &node_bootmem_data[12] },
+ { .bdata = &node_bootmem_data[13] },
+ { .bdata = &node_bootmem_data[14] },
+ { .bdata = &node_bootmem_data[15] },
+#endif
+};
+
+EXPORT_SYMBOL(discontig_node_data);
diff --git a/arch/arm/mm/extable.c b/arch/arm/mm/extable.c
new file mode 100644
index 0000000..9592c3e
--- /dev/null
+++ b/arch/arm/mm/extable.c
@@ -0,0 +1,16 @@
+/*
+ * linux/arch/arm/mm/extable.c
+ */
+#include <linux/module.h>
+#include <asm/uaccess.h>
+
+int fixup_exception(struct pt_regs *regs)
+{
+ const struct exception_table_entry *fixup;
+
+ fixup = search_exception_tables(instruction_pointer(regs));
+ if (fixup)
+ regs->ARM_pc = fixup->fixup;
+
+ return fixup != NULL;
+}
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
new file mode 100644
index 0000000..01967dd
--- /dev/null
+++ b/arch/arm/mm/fault-armv.c
@@ -0,0 +1,223 @@
+/*
+ * linux/arch/arm/mm/fault-armv.c
+ *
+ * Copyright (C) 1995 Linus Torvalds
+ * Modifications for ARM processor (c) 1995-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/bitops.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/pagemap.h>
+
+#include <asm/cacheflush.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+
+static unsigned long shared_pte_mask = L_PTE_CACHEABLE;
+
+/*
+ * We take the easy way out of this problem - we make the
+ * PTE uncacheable. However, we leave the write buffer on.
+ */
+static int adjust_pte(struct vm_area_struct *vma, unsigned long address)
+{
+ pgd_t *pgd;
+ pmd_t *pmd;
+ pte_t *pte, entry;
+ int ret = 0;
+
+ pgd = pgd_offset(vma->vm_mm, address);
+ if (pgd_none(*pgd))
+ goto no_pgd;
+ if (pgd_bad(*pgd))
+ goto bad_pgd;
+
+ pmd = pmd_offset(pgd, address);
+ if (pmd_none(*pmd))
+ goto no_pmd;
+ if (pmd_bad(*pmd))
+ goto bad_pmd;
+
+ pte = pte_offset_map(pmd, address);
+ entry = *pte;
+
+ /*
+ * If this page isn't present, or is already setup to
+ * fault (ie, is old), we can safely ignore any issues.
+ */
+ if (pte_present(entry) && pte_val(entry) & shared_pte_mask) {
+ flush_cache_page(vma, address, pte_pfn(entry));
+ pte_val(entry) &= ~shared_pte_mask;
+ set_pte(pte, entry);
+ flush_tlb_page(vma, address);
+ ret = 1;
+ }
+ pte_unmap(pte);
+ return ret;
+
+bad_pgd:
+ pgd_ERROR(*pgd);
+ pgd_clear(pgd);
+no_pgd:
+ return 0;
+
+bad_pmd:
+ pmd_ERROR(*pmd);
+ pmd_clear(pmd);
+no_pmd:
+ return 0;
+}
+
+static void
+make_coherent(struct vm_area_struct *vma, unsigned long addr, struct page *page, int dirty)
+{
+ struct address_space *mapping = page_mapping(page);
+ struct mm_struct *mm = vma->vm_mm;
+ struct vm_area_struct *mpnt;
+ struct prio_tree_iter iter;
+ unsigned long offset;
+ pgoff_t pgoff;
+ int aliases = 0;
+
+ if (!mapping)
+ return;
+
+ pgoff = vma->vm_pgoff + ((addr - vma->vm_start) >> PAGE_SHIFT);
+
+ /*
+ * If we have any shared mappings that are in the same mm
+ * space, then we need to handle them specially to maintain
+ * cache coherency.
+ */
+ flush_dcache_mmap_lock(mapping);
+ vma_prio_tree_foreach(mpnt, &iter, &mapping->i_mmap, pgoff, pgoff) {
+ /*
+ * If this VMA is not in our MM, we can ignore it.
+ * Note that we intentionally mask out the VMA
+ * that we are fixing up.
+ */
+ if (mpnt->vm_mm != mm || mpnt == vma)
+ continue;
+ if (!(mpnt->vm_flags & VM_MAYSHARE))
+ continue;
+ offset = (pgoff - mpnt->vm_pgoff) << PAGE_SHIFT;
+ aliases += adjust_pte(mpnt, mpnt->vm_start + offset);
+ }
+ flush_dcache_mmap_unlock(mapping);
+ if (aliases)
+ adjust_pte(vma, addr);
+ else
+ flush_cache_page(vma, addr, page_to_pfn(page));
+}
+
+/*
+ * Take care of architecture specific things when placing a new PTE into
+ * a page table, or changing an existing PTE. Basically, there are two
+ * things that we need to take care of:
+ *
+ * 1. If PG_dcache_dirty is set for the page, we need to ensure
+ * that any cache entries for the kernels virtual memory
+ * range are written back to the page.
+ * 2. If we have multiple shared mappings of the same space in
+ * an object, we need to deal with the cache aliasing issues.
+ *
+ * Note that the page_table_lock will be held.
+ */
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
+{
+ unsigned long pfn = pte_pfn(pte);
+ struct page *page;
+
+ if (!pfn_valid(pfn))
+ return;
+ page = pfn_to_page(pfn);
+ if (page_mapping(page)) {
+ int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
+
+ if (dirty) {
+ /*
+ * This is our first userspace mapping of this page.
+ * Ensure that the physical page is coherent with
+ * the kernel mapping.
+ *
+ * FIXME: only need to do this on VIVT and aliasing
+ * VIPT cache architectures. We can do that
+ * by choosing whether to set this bit...
+ */
+ __cpuc_flush_dcache_page(page_address(page));
+ }
+
+ if (cache_is_vivt())
+ make_coherent(vma, addr, page, dirty);
+ }
+}
+
+/*
+ * Check whether the write buffer has physical address aliasing
+ * issues. If it has, we need to avoid them for the case where
+ * we have several shared mappings of the same object in user
+ * space.
+ */
+static int __init check_writebuffer(unsigned long *p1, unsigned long *p2)
+{
+ register unsigned long zero = 0, one = 1, val;
+
+ local_irq_disable();
+ mb();
+ *p1 = one;
+ mb();
+ *p2 = zero;
+ mb();
+ val = *p1;
+ mb();
+ local_irq_enable();
+ return val != zero;
+}
+
+void __init check_writebuffer_bugs(void)
+{
+ struct page *page;
+ const char *reason;
+ unsigned long v = 1;
+
+ printk(KERN_INFO "CPU: Testing write buffer coherency: ");
+
+ page = alloc_page(GFP_KERNEL);
+ if (page) {
+ unsigned long *p1, *p2;
+ pgprot_t prot = __pgprot(L_PTE_PRESENT|L_PTE_YOUNG|
+ L_PTE_DIRTY|L_PTE_WRITE|
+ L_PTE_BUFFERABLE);
+
+ p1 = vmap(&page, 1, VM_IOREMAP, prot);
+ p2 = vmap(&page, 1, VM_IOREMAP, prot);
+
+ if (p1 && p2) {
+ v = check_writebuffer(p1, p2);
+ reason = "enabling work-around";
+ } else {
+ reason = "unable to map memory\n";
+ }
+
+ vunmap(p1);
+ vunmap(p2);
+ put_page(page);
+ } else {
+ reason = "unable to grab page\n";
+ }
+
+ if (v) {
+ printk("failed, %s\n", reason);
+ shared_pte_mask |= L_PTE_BUFFERABLE;
+ } else {
+ printk("ok\n");
+ }
+}
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
new file mode 100644
index 0000000..29be1c0
--- /dev/null
+++ b/arch/arm/mm/fault.c
@@ -0,0 +1,462 @@
+/*
+ * linux/arch/arm/mm/fault.c
+ *
+ * Copyright (C) 1995 Linus Torvalds
+ * Modifications for ARM processor (c) 1995-2004 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/ptrace.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+#include <asm/uaccess.h>
+
+#include "fault.h"
+
+/*
+ * This is useful to dump out the page tables associated with
+ * 'addr' in mm 'mm'.
+ */
+void show_pte(struct mm_struct *mm, unsigned long addr)
+{
+ pgd_t *pgd;
+
+ if (!mm)
+ mm = &init_mm;
+
+ printk(KERN_ALERT "pgd = %p\n", mm->pgd);
+ pgd = pgd_offset(mm, addr);
+ printk(KERN_ALERT "[%08lx] *pgd=%08lx", addr, pgd_val(*pgd));
+
+ do {
+ pmd_t *pmd;
+ pte_t *pte;
+
+ if (pgd_none(*pgd))
+ break;
+
+ if (pgd_bad(*pgd)) {
+ printk("(bad)");
+ break;
+ }
+
+ pmd = pmd_offset(pgd, addr);
+#if PTRS_PER_PMD != 1
+ printk(", *pmd=%08lx", pmd_val(*pmd));
+#endif
+
+ if (pmd_none(*pmd))
+ break;
+
+ if (pmd_bad(*pmd)) {
+ printk("(bad)");
+ break;
+ }
+
+#ifndef CONFIG_HIGHMEM
+ /* We must not map this if we have highmem enabled */
+ pte = pte_offset_map(pmd, addr);
+ printk(", *pte=%08lx", pte_val(*pte));
+ printk(", *ppte=%08lx", pte_val(pte[-PTRS_PER_PTE]));
+ pte_unmap(pte);
+#endif
+ } while(0);
+
+ printk("\n");
+}
+
+/*
+ * Oops. The kernel tried to access some page that wasn't present.
+ */
+static void
+__do_kernel_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
+ struct pt_regs *regs)
+{
+ /*
+ * Are we prepared to handle this kernel fault?
+ */
+ if (fixup_exception(regs))
+ return;
+
+ /*
+ * No handler, we'll have to terminate things with extreme prejudice.
+ */
+ bust_spinlocks(1);
+ printk(KERN_ALERT
+ "Unable to handle kernel %s at virtual address %08lx\n",
+ (addr < PAGE_SIZE) ? "NULL pointer dereference" :
+ "paging request", addr);
+
+ show_pte(mm, addr);
+ die("Oops", regs, fsr);
+ bust_spinlocks(0);
+ do_exit(SIGKILL);
+}
+
+/*
+ * Something tried to access memory that isn't in our memory map..
+ * User mode accesses just cause a SIGSEGV
+ */
+static void
+__do_user_fault(struct task_struct *tsk, unsigned long addr,
+ unsigned int fsr, int code, struct pt_regs *regs)
+{
+ struct siginfo si;
+
+#ifdef CONFIG_DEBUG_USER
+ if (user_debug & UDBG_SEGV) {
+ printk(KERN_DEBUG "%s: unhandled page fault at 0x%08lx, code 0x%03x\n",
+ tsk->comm, addr, fsr);
+ show_pte(tsk->mm, addr);
+ show_regs(regs);
+ }
+#endif
+
+ tsk->thread.address = addr;
+ tsk->thread.error_code = fsr;
+ tsk->thread.trap_no = 14;
+ si.si_signo = SIGSEGV;
+ si.si_errno = 0;
+ si.si_code = code;
+ si.si_addr = (void __user *)addr;
+ force_sig_info(SIGSEGV, &si, tsk);
+}
+
+void
+do_bad_area(struct task_struct *tsk, struct mm_struct *mm, unsigned long addr,
+ unsigned int fsr, struct pt_regs *regs)
+{
+ /*
+ * If we are in kernel mode at this point, we
+ * have no context to handle this fault with.
+ */
+ if (user_mode(regs))
+ __do_user_fault(tsk, addr, fsr, SEGV_MAPERR, regs);
+ else
+ __do_kernel_fault(mm, addr, fsr, regs);
+}
+
+#define VM_FAULT_BADMAP (-20)
+#define VM_FAULT_BADACCESS (-21)
+
+static int
+__do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
+ struct task_struct *tsk)
+{
+ struct vm_area_struct *vma;
+ int fault, mask;
+
+ vma = find_vma(mm, addr);
+ fault = VM_FAULT_BADMAP;
+ if (!vma)
+ goto out;
+ if (vma->vm_start > addr)
+ goto check_stack;
+
+ /*
+ * Ok, we have a good vm_area for this
+ * memory access, so we can handle it.
+ */
+good_area:
+ if (fsr & (1 << 11)) /* write? */
+ mask = VM_WRITE;
+ else
+ mask = VM_READ|VM_EXEC;
+
+ fault = VM_FAULT_BADACCESS;
+ if (!(vma->vm_flags & mask))
+ goto out;
+
+ /*
+ * If for any reason at all we couldn't handle
+ * the fault, make sure we exit gracefully rather
+ * than endlessly redo the fault.
+ */
+survive:
+ fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, fsr & (1 << 11));
+
+ /*
+ * Handle the "normal" cases first - successful and sigbus
+ */
+ switch (fault) {
+ case VM_FAULT_MAJOR:
+ tsk->maj_flt++;
+ return fault;
+ case VM_FAULT_MINOR:
+ tsk->min_flt++;
+ case VM_FAULT_SIGBUS:
+ return fault;
+ }
+
+ if (tsk->pid != 1)
+ goto out;
+
+ /*
+ * If we are out of memory for pid1,
+ * sleep for a while and retry
+ */
+ yield();
+ goto survive;
+
+check_stack:
+ if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr))
+ goto good_area;
+out:
+ return fault;
+}
+
+static int
+do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+ struct task_struct *tsk;
+ struct mm_struct *mm;
+ int fault;
+
+ tsk = current;
+ mm = tsk->mm;
+
+ /*
+ * If we're in an interrupt or have no user
+ * context, we must not take the fault..
+ */
+ if (in_interrupt() || !mm)
+ goto no_context;
+
+ down_read(&mm->mmap_sem);
+ fault = __do_page_fault(mm, addr, fsr, tsk);
+ up_read(&mm->mmap_sem);
+
+ /*
+ * Handle the "normal" case first
+ */
+ if (fault > 0)
+ return 0;
+
+ /*
+ * We had some memory, but were unable to
+ * successfully fix up this page fault.
+ */
+ if (fault == 0)
+ goto do_sigbus;
+
+ /*
+ * If we are in kernel mode at this point, we
+ * have no context to handle this fault with.
+ */
+ if (!user_mode(regs))
+ goto no_context;
+
+ if (fault == VM_FAULT_OOM) {
+ /*
+ * We ran out of memory, or some other thing happened to
+ * us that made us unable to handle the page fault gracefully.
+ */
+ printk("VM: killing process %s\n", tsk->comm);
+ do_exit(SIGKILL);
+ } else
+ __do_user_fault(tsk, addr, fsr, fault == VM_FAULT_BADACCESS ?
+ SEGV_ACCERR : SEGV_MAPERR, regs);
+ return 0;
+
+
+/*
+ * We ran out of memory, or some other thing happened to us that made
+ * us unable to handle the page fault gracefully.
+ */
+do_sigbus:
+ /*
+ * Send a sigbus, regardless of whether we were in kernel
+ * or user mode.
+ */
+ tsk->thread.address = addr;
+ tsk->thread.error_code = fsr;
+ tsk->thread.trap_no = 14;
+ force_sig(SIGBUS, tsk);
+#ifdef CONFIG_DEBUG_USER
+ if (user_debug & UDBG_BUS) {
+ printk(KERN_DEBUG "%s: sigbus at 0x%08lx, pc=0x%08lx\n",
+ current->comm, addr, instruction_pointer(regs));
+ }
+#endif
+
+ /* Kernel mode? Handle exceptions or die */
+ if (user_mode(regs))
+ return 0;
+
+no_context:
+ __do_kernel_fault(mm, addr, fsr, regs);
+ return 0;
+}
+
+/*
+ * First Level Translation Fault Handler
+ *
+ * We enter here because the first level page table doesn't contain
+ * a valid entry for the address.
+ *
+ * If the address is in kernel space (>= TASK_SIZE), then we are
+ * probably faulting in the vmalloc() area.
+ *
+ * If the init_task's first level page tables contains the relevant
+ * entry, we copy the it to this task. If not, we send the process
+ * a signal, fixup the exception, or oops the kernel.
+ *
+ * NOTE! We MUST NOT take any locks for this case. We may be in an
+ * interrupt or a critical region, and should only copy the information
+ * from the master page table, nothing more.
+ */
+static int
+do_translation_fault(unsigned long addr, unsigned int fsr,
+ struct pt_regs *regs)
+{
+ struct task_struct *tsk;
+ unsigned int index;
+ pgd_t *pgd, *pgd_k;
+ pmd_t *pmd, *pmd_k;
+
+ if (addr < TASK_SIZE)
+ return do_page_fault(addr, fsr, regs);
+
+ index = pgd_index(addr);
+
+ /*
+ * FIXME: CP15 C1 is write only on ARMv3 architectures.
+ */
+ pgd = cpu_get_pgd() + index;
+ pgd_k = init_mm.pgd + index;
+
+ if (pgd_none(*pgd_k))
+ goto bad_area;
+
+ if (!pgd_present(*pgd))
+ set_pgd(pgd, *pgd_k);
+
+ pmd_k = pmd_offset(pgd_k, addr);
+ pmd = pmd_offset(pgd, addr);
+
+ if (pmd_none(*pmd_k))
+ goto bad_area;
+
+ copy_pmd(pmd, pmd_k);
+ return 0;
+
+bad_area:
+ tsk = current;
+
+ do_bad_area(tsk, tsk->active_mm, addr, fsr, regs);
+ return 0;
+}
+
+/*
+ * Some section permission faults need to be handled gracefully.
+ * They can happen due to a __{get,put}_user during an oops.
+ */
+static int
+do_sect_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+ struct task_struct *tsk = current;
+ do_bad_area(tsk, tsk->active_mm, addr, fsr, regs);
+ return 0;
+}
+
+/*
+ * This abort handler always returns "fault".
+ */
+static int
+do_bad(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+ return 1;
+}
+
+static struct fsr_info {
+ int (*fn)(unsigned long addr, unsigned int fsr, struct pt_regs *regs);
+ int sig;
+ const char *name;
+} fsr_info[] = {
+ /*
+ * The following are the standard ARMv3 and ARMv4 aborts. ARMv5
+ * defines these to be "precise" aborts.
+ */
+ { do_bad, SIGSEGV, "vector exception" },
+ { do_bad, SIGILL, "alignment exception" },
+ { do_bad, SIGKILL, "terminal exception" },
+ { do_bad, SIGILL, "alignment exception" },
+ { do_bad, SIGBUS, "external abort on linefetch" },
+ { do_translation_fault, SIGSEGV, "section translation fault" },
+ { do_bad, SIGBUS, "external abort on linefetch" },
+ { do_page_fault, SIGSEGV, "page translation fault" },
+ { do_bad, SIGBUS, "external abort on non-linefetch" },
+ { do_bad, SIGSEGV, "section domain fault" },
+ { do_bad, SIGBUS, "external abort on non-linefetch" },
+ { do_bad, SIGSEGV, "page domain fault" },
+ { do_bad, SIGBUS, "external abort on translation" },
+ { do_sect_fault, SIGSEGV, "section permission fault" },
+ { do_bad, SIGBUS, "external abort on translation" },
+ { do_page_fault, SIGSEGV, "page permission fault" },
+ /*
+ * The following are "imprecise" aborts, which are signalled by bit
+ * 10 of the FSR, and may not be recoverable. These are only
+ * supported if the CPU abort handler supports bit 10.
+ */
+ { do_bad, SIGBUS, "unknown 16" },
+ { do_bad, SIGBUS, "unknown 17" },
+ { do_bad, SIGBUS, "unknown 18" },
+ { do_bad, SIGBUS, "unknown 19" },
+ { do_bad, SIGBUS, "lock abort" }, /* xscale */
+ { do_bad, SIGBUS, "unknown 21" },
+ { do_bad, SIGBUS, "imprecise external abort" }, /* xscale */
+ { do_bad, SIGBUS, "unknown 23" },
+ { do_bad, SIGBUS, "dcache parity error" }, /* xscale */
+ { do_bad, SIGBUS, "unknown 25" },
+ { do_bad, SIGBUS, "unknown 26" },
+ { do_bad, SIGBUS, "unknown 27" },
+ { do_bad, SIGBUS, "unknown 28" },
+ { do_bad, SIGBUS, "unknown 29" },
+ { do_bad, SIGBUS, "unknown 30" },
+ { do_bad, SIGBUS, "unknown 31" }
+};
+
+void __init
+hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *),
+ int sig, const char *name)
+{
+ if (nr >= 0 && nr < ARRAY_SIZE(fsr_info)) {
+ fsr_info[nr].fn = fn;
+ fsr_info[nr].sig = sig;
+ fsr_info[nr].name = name;
+ }
+}
+
+/*
+ * Dispatch a data abort to the relevant handler.
+ */
+asmlinkage void
+do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+ const struct fsr_info *inf = fsr_info + (fsr & 15) + ((fsr & (1 << 10)) >> 6);
+
+ if (!inf->fn(addr, fsr, regs))
+ return;
+
+ printk(KERN_ALERT "Unhandled fault: %s (0x%03x) at 0x%08lx\n",
+ inf->name, fsr, addr);
+ force_sig(inf->sig, current);
+ show_pte(current->mm, addr);
+ die_if_kernel("Oops", regs, 0);
+}
+
+asmlinkage void
+do_PrefetchAbort(unsigned long addr, struct pt_regs *regs)
+{
+ do_translation_fault(addr, 0, regs);
+}
+
diff --git a/arch/arm/mm/fault.h b/arch/arm/mm/fault.h
new file mode 100644
index 0000000..73b59e8
--- /dev/null
+++ b/arch/arm/mm/fault.h
@@ -0,0 +1,6 @@
+void do_bad_area(struct task_struct *tsk, struct mm_struct *mm,
+ unsigned long addr, unsigned int fsr, struct pt_regs *regs);
+
+void show_pte(struct mm_struct *mm, unsigned long addr);
+
+unsigned long search_exception_table(unsigned long addr);
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
new file mode 100644
index 0000000..c6de48d
--- /dev/null
+++ b/arch/arm/mm/flush.c
@@ -0,0 +1,94 @@
+/*
+ * linux/arch/arm/mm/flush.c
+ *
+ * Copyright (C) 1995-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+
+#include <asm/cacheflush.h>
+#include <asm/system.h>
+
+static void __flush_dcache_page(struct address_space *mapping, struct page *page)
+{
+ struct mm_struct *mm = current->active_mm;
+ struct vm_area_struct *mpnt;
+ struct prio_tree_iter iter;
+ pgoff_t pgoff;
+
+ /*
+ * Writeback any data associated with the kernel mapping of this
+ * page. This ensures that data in the physical page is mutually
+ * coherent with the kernels mapping.
+ */
+ __cpuc_flush_dcache_page(page_address(page));
+
+ /*
+ * If there's no mapping pointer here, then this page isn't
+ * visible to userspace yet, so there are no cache lines
+ * associated with any other aliases.
+ */
+ if (!mapping)
+ return;
+
+ /*
+ * There are possible user space mappings of this page:
+ * - VIVT cache: we need to also write back and invalidate all user
+ * data in the current VM view associated with this page.
+ * - aliasing VIPT: we only need to find one mapping of this page.
+ */
+ pgoff = page->index << (PAGE_CACHE_SHIFT - PAGE_SHIFT);
+
+ flush_dcache_mmap_lock(mapping);
+ vma_prio_tree_foreach(mpnt, &iter, &mapping->i_mmap, pgoff, pgoff) {
+ unsigned long offset;
+
+ /*
+ * If this VMA is not in our MM, we can ignore it.
+ */
+ if (mpnt->vm_mm != mm)
+ continue;
+ if (!(mpnt->vm_flags & VM_MAYSHARE))
+ continue;
+ offset = (pgoff - mpnt->vm_pgoff) << PAGE_SHIFT;
+ flush_cache_page(mpnt, mpnt->vm_start + offset, page_to_pfn(page));
+ if (cache_is_vipt())
+ break;
+ }
+ flush_dcache_mmap_unlock(mapping);
+}
+
+/*
+ * Ensure cache coherency between kernel mapping and userspace mapping
+ * of this page.
+ *
+ * We have three cases to consider:
+ * - VIPT non-aliasing cache: fully coherent so nothing required.
+ * - VIVT: fully aliasing, so we need to handle every alias in our
+ * current VM view.
+ * - VIPT aliasing: need to handle one alias in our current VM view.
+ *
+ * If we need to handle aliasing:
+ * If the page only exists in the page cache and there are no user
+ * space mappings, we can be lazy and remember that we may have dirty
+ * kernel cache lines for later. Otherwise, we assume we have
+ * aliasing mappings.
+ */
+void flush_dcache_page(struct page *page)
+{
+ struct address_space *mapping = page_mapping(page);
+
+ if (cache_is_vipt_nonaliasing())
+ return;
+
+ if (mapping && !mapping_mapped(mapping))
+ set_bit(PG_dcache_dirty, &page->flags);
+ else
+ __flush_dcache_page(mapping, page);
+}
+EXPORT_SYMBOL(flush_dcache_page);
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
new file mode 100644
index 0000000..41156c5
--- /dev/null
+++ b/arch/arm/mm/init.c
@@ -0,0 +1,621 @@
+/*
+ * linux/arch/arm/mm/init.c
+ *
+ * Copyright (C) 1995-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/swap.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/mman.h>
+#include <linux/nodemask.h>
+#include <linux/initrd.h>
+
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/tlb.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#define TABLE_SIZE (2 * PTRS_PER_PTE * sizeof(pte_t))
+
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+extern void _stext, _text, _etext, __data_start, _end, __init_begin, __init_end;
+extern unsigned long phys_initrd_start;
+extern unsigned long phys_initrd_size;
+
+/*
+ * The sole use of this is to pass memory configuration
+ * data from paging_init to mem_init.
+ */
+static struct meminfo meminfo __initdata = { 0, };
+
+/*
+ * empty_zero_page is a special page that is used for
+ * zero-initialized data and COW.
+ */
+struct page *empty_zero_page;
+
+void show_mem(void)
+{
+ int free = 0, total = 0, reserved = 0;
+ int shared = 0, cached = 0, slab = 0, node;
+
+ printk("Mem-info:\n");
+ show_free_areas();
+ printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
+
+ for_each_online_node(node) {
+ struct page *page, *end;
+
+ page = NODE_MEM_MAP(node);
+ end = page + NODE_DATA(node)->node_spanned_pages;
+
+ do {
+ total++;
+ if (PageReserved(page))
+ reserved++;
+ else if (PageSwapCache(page))
+ cached++;
+ else if (PageSlab(page))
+ slab++;
+ else if (!page_count(page))
+ free++;
+ else
+ shared += page_count(page) - 1;
+ page++;
+ } while (page < end);
+ }
+
+ printk("%d pages of RAM\n", total);
+ printk("%d free pages\n", free);
+ printk("%d reserved pages\n", reserved);
+ printk("%d slab pages\n", slab);
+ printk("%d pages shared\n", shared);
+ printk("%d pages swap cached\n", cached);
+}
+
+struct node_info {
+ unsigned int start;
+ unsigned int end;
+ int bootmap_pages;
+};
+
+#define O_PFN_DOWN(x) ((x) >> PAGE_SHIFT)
+#define V_PFN_DOWN(x) O_PFN_DOWN(__pa(x))
+
+#define O_PFN_UP(x) (PAGE_ALIGN(x) >> PAGE_SHIFT)
+#define V_PFN_UP(x) O_PFN_UP(__pa(x))
+
+#define PFN_SIZE(x) ((x) >> PAGE_SHIFT)
+#define PFN_RANGE(s,e) PFN_SIZE(PAGE_ALIGN((unsigned long)(e)) - \
+ (((unsigned long)(s)) & PAGE_MASK))
+
+/*
+ * FIXME: We really want to avoid allocating the bootmap bitmap
+ * over the top of the initrd. Hopefully, this is located towards
+ * the start of a bank, so if we allocate the bootmap bitmap at
+ * the end, we won't clash.
+ */
+static unsigned int __init
+find_bootmap_pfn(int node, struct meminfo *mi, unsigned int bootmap_pages)
+{
+ unsigned int start_pfn, bank, bootmap_pfn;
+
+ start_pfn = V_PFN_UP(&_end);
+ bootmap_pfn = 0;
+
+ for (bank = 0; bank < mi->nr_banks; bank ++) {
+ unsigned int start, end;
+
+ if (mi->bank[bank].node != node)
+ continue;
+
+ start = O_PFN_UP(mi->bank[bank].start);
+ end = O_PFN_DOWN(mi->bank[bank].size +
+ mi->bank[bank].start);
+
+ if (end < start_pfn)
+ continue;
+
+ if (start < start_pfn)
+ start = start_pfn;
+
+ if (end <= start)
+ continue;
+
+ if (end - start >= bootmap_pages) {
+ bootmap_pfn = start;
+ break;
+ }
+ }
+
+ if (bootmap_pfn == 0)
+ BUG();
+
+ return bootmap_pfn;
+}
+
+/*
+ * Scan the memory info structure and pull out:
+ * - the end of memory
+ * - the number of nodes
+ * - the pfn range of each node
+ * - the number of bootmem bitmap pages
+ */
+static unsigned int __init
+find_memend_and_nodes(struct meminfo *mi, struct node_info *np)
+{
+ unsigned int i, bootmem_pages = 0, memend_pfn = 0;
+
+ for (i = 0; i < MAX_NUMNODES; i++) {
+ np[i].start = -1U;
+ np[i].end = 0;
+ np[i].bootmap_pages = 0;
+ }
+
+ for (i = 0; i < mi->nr_banks; i++) {
+ unsigned long start, end;
+ int node;
+
+ if (mi->bank[i].size == 0) {
+ /*
+ * Mark this bank with an invalid node number
+ */
+ mi->bank[i].node = -1;
+ continue;
+ }
+
+ node = mi->bank[i].node;
+
+ /*
+ * Make sure we haven't exceeded the maximum number of nodes
+ * that we have in this configuration. If we have, we're in
+ * trouble. (maybe we ought to limit, instead of bugging?)
+ */
+ if (node >= MAX_NUMNODES)
+ BUG();
+ node_set_online(node);
+
+ /*
+ * Get the start and end pfns for this bank
+ */
+ start = O_PFN_UP(mi->bank[i].start);
+ end = O_PFN_DOWN(mi->bank[i].start + mi->bank[i].size);
+
+ if (np[node].start > start)
+ np[node].start = start;
+
+ if (np[node].end < end)
+ np[node].end = end;
+
+ if (memend_pfn < end)
+ memend_pfn = end;
+ }
+
+ /*
+ * Calculate the number of pages we require to
+ * store the bootmem bitmaps.
+ */
+ for_each_online_node(i) {
+ if (np[i].end == 0)
+ continue;
+
+ np[i].bootmap_pages = bootmem_bootmap_pages(np[i].end -
+ np[i].start);
+ bootmem_pages += np[i].bootmap_pages;
+ }
+
+ high_memory = __va(memend_pfn << PAGE_SHIFT);
+
+ /*
+ * This doesn't seem to be used by the Linux memory
+ * manager any more. If we can get rid of it, we
+ * also get rid of some of the stuff above as well.
+ */
+ max_low_pfn = memend_pfn - O_PFN_DOWN(PHYS_OFFSET);
+ max_pfn = memend_pfn - O_PFN_DOWN(PHYS_OFFSET);
+
+ return bootmem_pages;
+}
+
+static int __init check_initrd(struct meminfo *mi)
+{
+ int initrd_node = -2;
+#ifdef CONFIG_BLK_DEV_INITRD
+ unsigned long end = phys_initrd_start + phys_initrd_size;
+
+ /*
+ * Make sure that the initrd is within a valid area of
+ * memory.
+ */
+ if (phys_initrd_size) {
+ unsigned int i;
+
+ initrd_node = -1;
+
+ for (i = 0; i < mi->nr_banks; i++) {
+ unsigned long bank_end;
+
+ bank_end = mi->bank[i].start + mi->bank[i].size;
+
+ if (mi->bank[i].start <= phys_initrd_start &&
+ end <= bank_end)
+ initrd_node = mi->bank[i].node;
+ }
+ }
+
+ if (initrd_node == -1) {
+ printk(KERN_ERR "initrd (0x%08lx - 0x%08lx) extends beyond "
+ "physical memory - disabling initrd\n",
+ phys_initrd_start, end);
+ phys_initrd_start = phys_initrd_size = 0;
+ }
+#endif
+
+ return initrd_node;
+}
+
+/*
+ * Reserve the various regions of node 0
+ */
+static __init void reserve_node_zero(unsigned int bootmap_pfn, unsigned int bootmap_pages)
+{
+ pg_data_t *pgdat = NODE_DATA(0);
+ unsigned long res_size = 0;
+
+ /*
+ * Register the kernel text and data with bootmem.
+ * Note that this can only be in node 0.
+ */
+#ifdef CONFIG_XIP_KERNEL
+ reserve_bootmem_node(pgdat, __pa(&__data_start), &_end - &__data_start);
+#else
+ reserve_bootmem_node(pgdat, __pa(&_stext), &_end - &_stext);
+#endif
+
+ /*
+ * Reserve the page tables. These are already in use,
+ * and can only be in node 0.
+ */
+ reserve_bootmem_node(pgdat, __pa(swapper_pg_dir),
+ PTRS_PER_PGD * sizeof(pgd_t));
+
+ /*
+ * And don't forget to reserve the allocator bitmap,
+ * which will be freed later.
+ */
+ reserve_bootmem_node(pgdat, bootmap_pfn << PAGE_SHIFT,
+ bootmap_pages << PAGE_SHIFT);
+
+ /*
+ * Hmm... This should go elsewhere, but we really really need to
+ * stop things allocating the low memory; ideally we need a better
+ * implementation of GFP_DMA which does not assume that DMA-able
+ * memory starts at zero.
+ */
+ if (machine_is_integrator() || machine_is_cintegrator())
+ res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;
+
+ /*
+ * These should likewise go elsewhere. They pre-reserve the
+ * screen memory region at the start of main system memory.
+ */
+ if (machine_is_edb7211())
+ res_size = 0x00020000;
+ if (machine_is_p720t())
+ res_size = 0x00014000;
+
+#ifdef CONFIG_SA1111
+ /*
+ * Because of the SA1111 DMA bug, we want to preserve our
+ * precious DMA-able memory...
+ */
+ res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;
+#endif
+ if (res_size)
+ reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size);
+}
+
+/*
+ * Register all available RAM in this node with the bootmem allocator.
+ */
+static inline void free_bootmem_node_bank(int node, struct meminfo *mi)
+{
+ pg_data_t *pgdat = NODE_DATA(node);
+ int bank;
+
+ for (bank = 0; bank < mi->nr_banks; bank++)
+ if (mi->bank[bank].node == node)
+ free_bootmem_node(pgdat, mi->bank[bank].start,
+ mi->bank[bank].size);
+}
+
+/*
+ * Initialise the bootmem allocator for all nodes. This is called
+ * early during the architecture specific initialisation.
+ */
+static void __init bootmem_init(struct meminfo *mi)
+{
+ struct node_info node_info[MAX_NUMNODES], *np = node_info;
+ unsigned int bootmap_pages, bootmap_pfn, map_pg;
+ int node, initrd_node;
+
+ bootmap_pages = find_memend_and_nodes(mi, np);
+ bootmap_pfn = find_bootmap_pfn(0, mi, bootmap_pages);
+ initrd_node = check_initrd(mi);
+
+ map_pg = bootmap_pfn;
+
+ /*
+ * Initialise the bootmem nodes.
+ *
+ * What we really want to do is:
+ *
+ * unmap_all_regions_except_kernel();
+ * for_each_node_in_reverse_order(node) {
+ * map_node(node);
+ * allocate_bootmem_map(node);
+ * init_bootmem_node(node);
+ * free_bootmem_node(node);
+ * }
+ *
+ * but this is a 2.5-type change. For now, we just set
+ * the nodes up in reverse order.
+ *
+ * (we could also do with rolling bootmem_init and paging_init
+ * into one generic "memory_init" type function).
+ */
+ np += num_online_nodes() - 1;
+ for (node = num_online_nodes() - 1; node >= 0; node--, np--) {
+ /*
+ * If there are no pages in this node, ignore it.
+ * Note that node 0 must always have some pages.
+ */
+ if (np->end == 0 || !node_online(node)) {
+ if (node == 0)
+ BUG();
+ continue;
+ }
+
+ /*
+ * Initialise the bootmem allocator.
+ */
+ init_bootmem_node(NODE_DATA(node), map_pg, np->start, np->end);
+ free_bootmem_node_bank(node, mi);
+ map_pg += np->bootmap_pages;
+
+ /*
+ * If this is node 0, we need to reserve some areas ASAP -
+ * we may use bootmem on node 0 to setup the other nodes.
+ */
+ if (node == 0)
+ reserve_node_zero(bootmap_pfn, bootmap_pages);
+ }
+
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (phys_initrd_size && initrd_node >= 0) {
+ reserve_bootmem_node(NODE_DATA(initrd_node), phys_initrd_start,
+ phys_initrd_size);
+ initrd_start = __phys_to_virt(phys_initrd_start);
+ initrd_end = initrd_start + phys_initrd_size;
+ }
+#endif
+
+ BUG_ON(map_pg != bootmap_pfn + bootmap_pages);
+}
+
+/*
+ * paging_init() sets up the page tables, initialises the zone memory
+ * maps, and sets up the zero page, bad page and bad page tables.
+ */
+void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
+{
+ void *zero_page;
+ int node;
+
+ bootmem_init(mi);
+
+ memcpy(&meminfo, mi, sizeof(meminfo));
+
+ /*
+ * allocate the zero page. Note that we count on this going ok.
+ */
+ zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
+
+ /*
+ * initialise the page tables.
+ */
+ memtable_init(mi);
+ if (mdesc->map_io)
+ mdesc->map_io();
+ flush_tlb_all();
+
+ /*
+ * initialise the zones within each node
+ */
+ for_each_online_node(node) {
+ unsigned long zone_size[MAX_NR_ZONES];
+ unsigned long zhole_size[MAX_NR_ZONES];
+ struct bootmem_data *bdata;
+ pg_data_t *pgdat;
+ int i;
+
+ /*
+ * Initialise the zone size information.
+ */
+ for (i = 0; i < MAX_NR_ZONES; i++) {
+ zone_size[i] = 0;
+ zhole_size[i] = 0;
+ }
+
+ pgdat = NODE_DATA(node);
+ bdata = pgdat->bdata;
+
+ /*
+ * The size of this node has already been determined.
+ * If we need to do anything fancy with the allocation
+ * of this memory to the zones, now is the time to do
+ * it.
+ */
+ zone_size[0] = bdata->node_low_pfn -
+ (bdata->node_boot_start >> PAGE_SHIFT);
+
+ /*
+ * If this zone has zero size, skip it.
+ */
+ if (!zone_size[0])
+ continue;
+
+ /*
+ * For each bank in this node, calculate the size of the
+ * holes. holes = node_size - sum(bank_sizes_in_node)
+ */
+ zhole_size[0] = zone_size[0];
+ for (i = 0; i < mi->nr_banks; i++) {
+ if (mi->bank[i].node != node)
+ continue;
+
+ zhole_size[0] -= mi->bank[i].size >> PAGE_SHIFT;
+ }
+
+ /*
+ * Adjust the sizes according to any special
+ * requirements for this machine type.
+ */
+ arch_adjust_zones(node, zone_size, zhole_size);
+
+ free_area_init_node(node, pgdat, zone_size,
+ bdata->node_boot_start >> PAGE_SHIFT, zhole_size);
+ }
+
+ /*
+ * finish off the bad pages once
+ * the mem_map is initialised
+ */
+ memzero(zero_page, PAGE_SIZE);
+ empty_zero_page = virt_to_page(zero_page);
+ flush_dcache_page(empty_zero_page);
+}
+
+static inline void free_area(unsigned long addr, unsigned long end, char *s)
+{
+ unsigned int size = (end - addr) >> 10;
+
+ for (; addr < end; addr += PAGE_SIZE) {
+ struct page *page = virt_to_page(addr);
+ ClearPageReserved(page);
+ set_page_count(page, 1);
+ free_page(addr);
+ totalram_pages++;
+ }
+
+ if (size && s)
+ printk(KERN_INFO "Freeing %s memory: %dK\n", s, size);
+}
+
+/*
+ * mem_init() marks the free areas in the mem_map and tells us how much
+ * memory is free. This is done after various parts of the system have
+ * claimed their memory after the kernel image.
+ */
+void __init mem_init(void)
+{
+ unsigned int codepages, datapages, initpages;
+ int i, node;
+
+ codepages = &_etext - &_text;
+ datapages = &_end - &__data_start;
+ initpages = &__init_end - &__init_begin;
+
+#ifndef CONFIG_DISCONTIGMEM
+ max_mapnr = virt_to_page(high_memory) - mem_map;
+#endif
+
+ /*
+ * We may have non-contiguous memory.
+ */
+ if (meminfo.nr_banks != 1)
+ create_memmap_holes(&meminfo);
+
+ /* this will put all unused low memory onto the freelists */
+ for_each_online_node(node) {
+ pg_data_t *pgdat = NODE_DATA(node);
+
+ if (pgdat->node_spanned_pages != 0)
+ totalram_pages += free_all_bootmem_node(pgdat);
+ }
+
+#ifdef CONFIG_SA1111
+ /* now that our DMA memory is actually so designated, we can free it */
+ free_area(PAGE_OFFSET, (unsigned long)swapper_pg_dir, NULL);
+#endif
+
+ /*
+ * Since our memory may not be contiguous, calculate the
+ * real number of pages we have in this system
+ */
+ printk(KERN_INFO "Memory:");
+
+ num_physpages = 0;
+ for (i = 0; i < meminfo.nr_banks; i++) {
+ num_physpages += meminfo.bank[i].size >> PAGE_SHIFT;
+ printk(" %ldMB", meminfo.bank[i].size >> 20);
+ }
+
+ printk(" = %luMB total\n", num_physpages >> (20 - PAGE_SHIFT));
+ printk(KERN_NOTICE "Memory: %luKB available (%dK code, "
+ "%dK data, %dK init)\n",
+ (unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
+ codepages >> 10, datapages >> 10, initpages >> 10);
+
+ if (PAGE_SIZE >= 16384 && num_physpages <= 128) {
+ extern int sysctl_overcommit_memory;
+ /*
+ * On a machine this small we won't get
+ * anywhere without overcommit, so turn
+ * it on by default.
+ */
+ sysctl_overcommit_memory = OVERCOMMIT_ALWAYS;
+ }
+}
+
+void free_initmem(void)
+{
+ if (!machine_is_integrator() && !machine_is_cintegrator()) {
+ free_area((unsigned long)(&__init_begin),
+ (unsigned long)(&__init_end),
+ "init");
+ }
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+
+static int keep_initrd;
+
+void free_initrd_mem(unsigned long start, unsigned long end)
+{
+ if (!keep_initrd)
+ free_area(start, end, "initrd");
+}
+
+static int __init keepinitrd_setup(char *__unused)
+{
+ keep_initrd = 1;
+ return 1;
+}
+
+__setup("keepinitrd", keepinitrd_setup);
+#endif
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
new file mode 100644
index 0000000..00bb8fd
--- /dev/null
+++ b/arch/arm/mm/ioremap.c
@@ -0,0 +1,172 @@
+/*
+ * linux/arch/arm/mm/ioremap.c
+ *
+ * Re-map IO memory to kernel address space so that we can access it.
+ *
+ * (C) Copyright 1995 1996 Linus Torvalds
+ *
+ * Hacked for ARM by Phil Blundell <philb@gnu.org>
+ * Hacked to allow all architectures to build, and various cleanups
+ * by Russell King
+ *
+ * This allows a driver to remap an arbitrary region of bus memory into
+ * virtual space. One should *only* use readl, writel, memcpy_toio and
+ * so on with such remapped areas.
+ *
+ * Because the ARM only has a 32-bit address space we can't address the
+ * whole of the (physical) PCI space at once. PCI huge-mode addressing
+ * allows us to circumvent this restriction by splitting PCI space into
+ * two 2GB chunks and mapping only one at a time into processor memory.
+ * We use MMU protection domains to trap any attempt to access the bank
+ * that is not currently mapped. (This isn't fully implemented yet.)
+ */
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/tlbflush.h>
+
+static inline void
+remap_area_pte(pte_t * pte, unsigned long address, unsigned long size,
+ unsigned long phys_addr, pgprot_t pgprot)
+{
+ unsigned long end;
+
+ address &= ~PMD_MASK;
+ end = address + size;
+ if (end > PMD_SIZE)
+ end = PMD_SIZE;
+ BUG_ON(address >= end);
+ do {
+ if (!pte_none(*pte))
+ goto bad;
+
+ set_pte(pte, pfn_pte(phys_addr >> PAGE_SHIFT, pgprot));
+ address += PAGE_SIZE;
+ phys_addr += PAGE_SIZE;
+ pte++;
+ } while (address && (address < end));
+ return;
+
+ bad:
+ printk("remap_area_pte: page already exists\n");
+ BUG();
+}
+
+static inline int
+remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size,
+ unsigned long phys_addr, unsigned long flags)
+{
+ unsigned long end;
+ pgprot_t pgprot;
+
+ address &= ~PGDIR_MASK;
+ end = address + size;
+
+ if (end > PGDIR_SIZE)
+ end = PGDIR_SIZE;
+
+ phys_addr -= address;
+ BUG_ON(address >= end);
+
+ pgprot = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | L_PTE_WRITE | flags);
+ do {
+ pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+ if (!pte)
+ return -ENOMEM;
+ remap_area_pte(pte, address, end - address, address + phys_addr, pgprot);
+ address = (address + PMD_SIZE) & PMD_MASK;
+ pmd++;
+ } while (address && (address < end));
+ return 0;
+}
+
+static int
+remap_area_pages(unsigned long start, unsigned long phys_addr,
+ unsigned long size, unsigned long flags)
+{
+ unsigned long address = start;
+ unsigned long end = start + size;
+ int err = 0;
+ pgd_t * dir;
+
+ phys_addr -= address;
+ dir = pgd_offset(&init_mm, address);
+ BUG_ON(address >= end);
+ spin_lock(&init_mm.page_table_lock);
+ do {
+ pmd_t *pmd = pmd_alloc(&init_mm, dir, address);
+ if (!pmd) {
+ err = -ENOMEM;
+ break;
+ }
+ if (remap_area_pmd(pmd, address, end - address,
+ phys_addr + address, flags)) {
+ err = -ENOMEM;
+ break;
+ }
+
+ address = (address + PGDIR_SIZE) & PGDIR_MASK;
+ dir++;
+ } while (address && (address < end));
+
+ spin_unlock(&init_mm.page_table_lock);
+ flush_cache_vmap(start, end);
+ return err;
+}
+
+/*
+ * Remap an arbitrary physical address space into the kernel virtual
+ * address space. Needed when the kernel wants to access high addresses
+ * directly.
+ *
+ * NOTE! We need to allow non-page-aligned mappings too: we will obviously
+ * have to convert them into an offset in a page-aligned mapping, but the
+ * caller shouldn't need to know that small detail.
+ *
+ * 'flags' are the extra L_PTE_ flags that you want to specify for this
+ * mapping. See include/asm-arm/proc-armv/pgtable.h for more information.
+ */
+void __iomem *
+__ioremap(unsigned long phys_addr, size_t size, unsigned long flags,
+ unsigned long align)
+{
+ void * addr;
+ struct vm_struct * area;
+ unsigned long offset, last_addr;
+
+ /* Don't allow wraparound or zero size */
+ last_addr = phys_addr + size - 1;
+ if (!size || last_addr < phys_addr)
+ return NULL;
+
+ /*
+ * Mappings have to be page-aligned
+ */
+ offset = phys_addr & ~PAGE_MASK;
+ phys_addr &= PAGE_MASK;
+ size = PAGE_ALIGN(last_addr + 1) - phys_addr;
+
+ /*
+ * Ok, go for it..
+ */
+ area = get_vm_area(size, VM_IOREMAP);
+ if (!area)
+ return NULL;
+ addr = area->addr;
+ if (remap_area_pages((unsigned long) addr, phys_addr, size, flags)) {
+ vfree(addr);
+ return NULL;
+ }
+ return (void __iomem *) (offset + (char *)addr);
+}
+EXPORT_SYMBOL(__ioremap);
+
+void __iounmap(void __iomem *addr)
+{
+ vfree((void *) (PAGE_MASK & (unsigned long) addr));
+}
+EXPORT_SYMBOL(__iounmap);
diff --git a/arch/arm/mm/minicache.c b/arch/arm/mm/minicache.c
new file mode 100644
index 0000000..dedf2ab
--- /dev/null
+++ b/arch/arm/mm/minicache.c
@@ -0,0 +1,73 @@
+/*
+ * linux/arch/arm/mm/minicache.c
+ *
+ * Copyright (C) 2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This handles the mini data cache, as found on SA11x0 and XScale
+ * processors. When we copy a user page page, we map it in such a way
+ * that accesses to this page will not touch the main data cache, but
+ * will be cached in the mini data cache. This prevents us thrashing
+ * the main data cache on page faults.
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+
+/*
+ * 0xffff8000 to 0xffffffff is reserved for any ARM architecture
+ * specific hacks for copying pages efficiently.
+ */
+#define minicache_address (0xffff8000)
+#define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \
+ L_PTE_CACHEABLE)
+
+static pte_t *minicache_pte;
+
+/*
+ * Note that this is intended to be called only from the copy_user_page
+ * asm code; anything else will require special locking to prevent the
+ * mini-cache space being re-used. (Note: probably preempt unsafe).
+ *
+ * We rely on the fact that the minicache is 2K, and we'll be pushing
+ * 4K of data through it, so we don't actually have to specifically
+ * flush the minicache when we change the mapping.
+ *
+ * Note also: assert(PAGE_OFFSET <= virt < high_memory).
+ * Unsafe: preempt, kmap.
+ */
+unsigned long map_page_minicache(unsigned long virt)
+{
+ set_pte(minicache_pte, pfn_pte(__pa(virt) >> PAGE_SHIFT, minicache_pgprot));
+ flush_tlb_kernel_page(minicache_address);
+
+ return minicache_address;
+}
+
+static int __init minicache_init(void)
+{
+ pgd_t *pgd;
+ pmd_t *pmd;
+
+ spin_lock(&init_mm.page_table_lock);
+
+ pgd = pgd_offset_k(minicache_address);
+ pmd = pmd_alloc(&init_mm, pgd, minicache_address);
+ if (!pmd)
+ BUG();
+ minicache_pte = pte_alloc_kernel(&init_mm, pmd, minicache_address);
+ if (!minicache_pte)
+ BUG();
+
+ spin_unlock(&init_mm.page_table_lock);
+
+ return 0;
+}
+
+core_initcall(minicache_init);
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
new file mode 100644
index 0000000..f5a87db8
--- /dev/null
+++ b/arch/arm/mm/mm-armv.c
@@ -0,0 +1,760 @@
+/*
+ * linux/arch/arm/mm/mm-armv.c
+ *
+ * Copyright (C) 1998-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Page table sludge for ARM v3 and v4 processor architectures.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/highmem.h>
+#include <linux/nodemask.h>
+
+#include <asm/pgalloc.h>
+#include <asm/page.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/tlbflush.h>
+
+#include <asm/mach/map.h>
+
+#define CPOLICY_UNCACHED 0
+#define CPOLICY_BUFFERED 1
+#define CPOLICY_WRITETHROUGH 2
+#define CPOLICY_WRITEBACK 3
+#define CPOLICY_WRITEALLOC 4
+
+static unsigned int cachepolicy __initdata = CPOLICY_WRITEBACK;
+static unsigned int ecc_mask __initdata = 0;
+pgprot_t pgprot_kernel;
+
+EXPORT_SYMBOL(pgprot_kernel);
+
+struct cachepolicy {
+ const char policy[16];
+ unsigned int cr_mask;
+ unsigned int pmd;
+ unsigned int pte;
+};
+
+static struct cachepolicy cache_policies[] __initdata = {
+ {
+ .policy = "uncached",
+ .cr_mask = CR_W|CR_C,
+ .pmd = PMD_SECT_UNCACHED,
+ .pte = 0,
+ }, {
+ .policy = "buffered",
+ .cr_mask = CR_C,
+ .pmd = PMD_SECT_BUFFERED,
+ .pte = PTE_BUFFERABLE,
+ }, {
+ .policy = "writethrough",
+ .cr_mask = 0,
+ .pmd = PMD_SECT_WT,
+ .pte = PTE_CACHEABLE,
+ }, {
+ .policy = "writeback",
+ .cr_mask = 0,
+ .pmd = PMD_SECT_WB,
+ .pte = PTE_BUFFERABLE|PTE_CACHEABLE,
+ }, {
+ .policy = "writealloc",
+ .cr_mask = 0,
+ .pmd = PMD_SECT_WBWA,
+ .pte = PTE_BUFFERABLE|PTE_CACHEABLE,
+ }
+};
+
+/*
+ * These are useful for identifing cache coherency
+ * problems by allowing the cache or the cache and
+ * writebuffer to be turned off. (Note: the write
+ * buffer should not be on and the cache off).
+ */
+static void __init early_cachepolicy(char **p)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(cache_policies); i++) {
+ int len = strlen(cache_policies[i].policy);
+
+ if (memcmp(*p, cache_policies[i].policy, len) == 0) {
+ cachepolicy = i;
+ cr_alignment &= ~cache_policies[i].cr_mask;
+ cr_no_alignment &= ~cache_policies[i].cr_mask;
+ *p += len;
+ break;
+ }
+ }
+ if (i == ARRAY_SIZE(cache_policies))
+ printk(KERN_ERR "ERROR: unknown or unsupported cache policy\n");
+ flush_cache_all();
+ set_cr(cr_alignment);
+}
+
+static void __init early_nocache(char **__unused)
+{
+ char *p = "buffered";
+ printk(KERN_WARNING "nocache is deprecated; use cachepolicy=%s\n", p);
+ early_cachepolicy(&p);
+}
+
+static void __init early_nowrite(char **__unused)
+{
+ char *p = "uncached";
+ printk(KERN_WARNING "nowb is deprecated; use cachepolicy=%s\n", p);
+ early_cachepolicy(&p);
+}
+
+static void __init early_ecc(char **p)
+{
+ if (memcmp(*p, "on", 2) == 0) {
+ ecc_mask = PMD_PROTECTION;
+ *p += 2;
+ } else if (memcmp(*p, "off", 3) == 0) {
+ ecc_mask = 0;
+ *p += 3;
+ }
+}
+
+__early_param("nocache", early_nocache);
+__early_param("nowb", early_nowrite);
+__early_param("cachepolicy=", early_cachepolicy);
+__early_param("ecc=", early_ecc);
+
+static int __init noalign_setup(char *__unused)
+{
+ cr_alignment &= ~CR_A;
+ cr_no_alignment &= ~CR_A;
+ set_cr(cr_alignment);
+ return 1;
+}
+
+__setup("noalign", noalign_setup);
+
+#define FIRST_KERNEL_PGD_NR (FIRST_USER_PGD_NR + USER_PTRS_PER_PGD)
+
+/*
+ * need to get a 16k page for level 1
+ */
+pgd_t *get_pgd_slow(struct mm_struct *mm)
+{
+ pgd_t *new_pgd, *init_pgd;
+ pmd_t *new_pmd, *init_pmd;
+ pte_t *new_pte, *init_pte;
+
+ new_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL, 2);
+ if (!new_pgd)
+ goto no_pgd;
+
+ memzero(new_pgd, FIRST_KERNEL_PGD_NR * sizeof(pgd_t));
+
+ init_pgd = pgd_offset_k(0);
+
+ if (!vectors_high()) {
+ /*
+ * This lock is here just to satisfy pmd_alloc and pte_lock
+ */
+ spin_lock(&mm->page_table_lock);
+
+ /*
+ * On ARM, first page must always be allocated since it
+ * contains the machine vectors.
+ */
+ new_pmd = pmd_alloc(mm, new_pgd, 0);
+ if (!new_pmd)
+ goto no_pmd;
+
+ new_pte = pte_alloc_map(mm, new_pmd, 0);
+ if (!new_pte)
+ goto no_pte;
+
+ init_pmd = pmd_offset(init_pgd, 0);
+ init_pte = pte_offset_map_nested(init_pmd, 0);
+ set_pte(new_pte, *init_pte);
+ pte_unmap_nested(init_pte);
+ pte_unmap(new_pte);
+
+ spin_unlock(&mm->page_table_lock);
+ }
+
+ /*
+ * Copy over the kernel and IO PGD entries
+ */
+ memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR,
+ (PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t));
+
+ clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t));
+
+ return new_pgd;
+
+no_pte:
+ spin_unlock(&mm->page_table_lock);
+ pmd_free(new_pmd);
+ free_pages((unsigned long)new_pgd, 2);
+ return NULL;
+
+no_pmd:
+ spin_unlock(&mm->page_table_lock);
+ free_pages((unsigned long)new_pgd, 2);
+ return NULL;
+
+no_pgd:
+ return NULL;
+}
+
+void free_pgd_slow(pgd_t *pgd)
+{
+ pmd_t *pmd;
+ struct page *pte;
+
+ if (!pgd)
+ return;
+
+ /* pgd is always present and good */
+ pmd = (pmd_t *)pgd;
+ if (pmd_none(*pmd))
+ goto free;
+ if (pmd_bad(*pmd)) {
+ pmd_ERROR(*pmd);
+ pmd_clear(pmd);
+ goto free;
+ }
+
+ pte = pmd_page(*pmd);
+ pmd_clear(pmd);
+ dec_page_state(nr_page_table_pages);
+ pte_free(pte);
+ pmd_free(pmd);
+free:
+ free_pages((unsigned long) pgd, 2);
+}
+
+/*
+ * Create a SECTION PGD between VIRT and PHYS in domain
+ * DOMAIN with protection PROT. This operates on half-
+ * pgdir entry increments.
+ */
+static inline void
+alloc_init_section(unsigned long virt, unsigned long phys, int prot)
+{
+ pmd_t *pmdp;
+
+ pmdp = pmd_offset(pgd_offset_k(virt), virt);
+ if (virt & (1 << 20))
+ pmdp++;
+
+ *pmdp = __pmd(phys | prot);
+ flush_pmd_entry(pmdp);
+}
+
+/*
+ * Create a SUPER SECTION PGD between VIRT and PHYS with protection PROT
+ */
+static inline void
+alloc_init_supersection(unsigned long virt, unsigned long phys, int prot)
+{
+ int i;
+
+ for (i = 0; i < 16; i += 1) {
+ alloc_init_section(virt, phys & SUPERSECTION_MASK,
+ prot | PMD_SECT_SUPER);
+
+ virt += (PGDIR_SIZE / 2);
+ phys += (PGDIR_SIZE / 2);
+ }
+}
+
+/*
+ * Add a PAGE mapping between VIRT and PHYS in domain
+ * DOMAIN with protection PROT. Note that due to the
+ * way we map the PTEs, we must allocate two PTE_SIZE'd
+ * blocks - one for the Linux pte table, and one for
+ * the hardware pte table.
+ */
+static inline void
+alloc_init_page(unsigned long virt, unsigned long phys, unsigned int prot_l1, pgprot_t prot)
+{
+ pmd_t *pmdp;
+ pte_t *ptep;
+
+ pmdp = pmd_offset(pgd_offset_k(virt), virt);
+
+ if (pmd_none(*pmdp)) {
+ unsigned long pmdval;
+ ptep = alloc_bootmem_low_pages(2 * PTRS_PER_PTE *
+ sizeof(pte_t));
+
+ pmdval = __pa(ptep) | prot_l1;
+ pmdp[0] = __pmd(pmdval);
+ pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t));
+ flush_pmd_entry(pmdp);
+ }
+ ptep = pte_offset_kernel(pmdp, virt);
+
+ set_pte(ptep, pfn_pte(phys >> PAGE_SHIFT, prot));
+}
+
+/*
+ * Clear any PGD mapping. On a two-level page table system,
+ * the clearance is done by the middle-level functions (pmd)
+ * rather than the top-level (pgd) functions.
+ */
+static inline void clear_mapping(unsigned long virt)
+{
+ pmd_clear(pmd_offset(pgd_offset_k(virt), virt));
+}
+
+struct mem_types {
+ unsigned int prot_pte;
+ unsigned int prot_l1;
+ unsigned int prot_sect;
+ unsigned int domain;
+};
+
+static struct mem_types mem_types[] __initdata = {
+ [MT_DEVICE] = {
+ .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+ L_PTE_WRITE,
+ .prot_l1 = PMD_TYPE_TABLE,
+ .prot_sect = PMD_TYPE_SECT | PMD_SECT_UNCACHED |
+ PMD_SECT_AP_WRITE,
+ .domain = DOMAIN_IO,
+ },
+ [MT_CACHECLEAN] = {
+ .prot_sect = PMD_TYPE_SECT,
+ .domain = DOMAIN_KERNEL,
+ },
+ [MT_MINICLEAN] = {
+ .prot_sect = PMD_TYPE_SECT | PMD_SECT_MINICACHE,
+ .domain = DOMAIN_KERNEL,
+ },
+ [MT_LOW_VECTORS] = {
+ .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+ L_PTE_EXEC,
+ .prot_l1 = PMD_TYPE_TABLE,
+ .domain = DOMAIN_USER,
+ },
+ [MT_HIGH_VECTORS] = {
+ .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+ L_PTE_USER | L_PTE_EXEC,
+ .prot_l1 = PMD_TYPE_TABLE,
+ .domain = DOMAIN_USER,
+ },
+ [MT_MEMORY] = {
+ .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
+ .domain = DOMAIN_KERNEL,
+ },
+ [MT_ROM] = {
+ .prot_sect = PMD_TYPE_SECT,
+ .domain = DOMAIN_KERNEL,
+ },
+ [MT_IXP2000_DEVICE] = { /* IXP2400 requires XCB=101 for on-chip I/O */
+ .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+ L_PTE_WRITE,
+ .prot_l1 = PMD_TYPE_TABLE,
+ .prot_sect = PMD_TYPE_SECT | PMD_SECT_UNCACHED |
+ PMD_SECT_AP_WRITE | PMD_SECT_BUFFERABLE |
+ PMD_SECT_TEX(1),
+ .domain = DOMAIN_IO,
+ }
+};
+
+/*
+ * Adjust the PMD section entries according to the CPU in use.
+ */
+static void __init build_mem_type_table(void)
+{
+ struct cachepolicy *cp;
+ unsigned int cr = get_cr();
+ int cpu_arch = cpu_architecture();
+ int i;
+
+#if defined(CONFIG_CPU_DCACHE_DISABLE)
+ if (cachepolicy > CPOLICY_BUFFERED)
+ cachepolicy = CPOLICY_BUFFERED;
+#elif defined(CONFIG_CPU_DCACHE_WRITETHROUGH)
+ if (cachepolicy > CPOLICY_WRITETHROUGH)
+ cachepolicy = CPOLICY_WRITETHROUGH;
+#endif
+ if (cpu_arch < CPU_ARCH_ARMv5) {
+ if (cachepolicy >= CPOLICY_WRITEALLOC)
+ cachepolicy = CPOLICY_WRITEBACK;
+ ecc_mask = 0;
+ }
+
+ if (cpu_arch <= CPU_ARCH_ARMv5) {
+ for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
+ if (mem_types[i].prot_l1)
+ mem_types[i].prot_l1 |= PMD_BIT4;
+ if (mem_types[i].prot_sect)
+ mem_types[i].prot_sect |= PMD_BIT4;
+ }
+ }
+
+ /*
+ * ARMv6 and above have extended page tables.
+ */
+ if (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP)) {
+ /*
+ * bit 4 becomes XN which we must clear for the
+ * kernel memory mapping.
+ */
+ mem_types[MT_MEMORY].prot_sect &= ~PMD_BIT4;
+ mem_types[MT_ROM].prot_sect &= ~PMD_BIT4;
+ /*
+ * Mark cache clean areas read only from SVC mode
+ * and no access from userspace.
+ */
+ mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
+ mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
+ }
+
+ cp = &cache_policies[cachepolicy];
+
+ if (cpu_arch >= CPU_ARCH_ARMv5) {
+ mem_types[MT_LOW_VECTORS].prot_pte |= cp->pte & PTE_CACHEABLE;
+ mem_types[MT_HIGH_VECTORS].prot_pte |= cp->pte & PTE_CACHEABLE;
+ } else {
+ mem_types[MT_LOW_VECTORS].prot_pte |= cp->pte;
+ mem_types[MT_HIGH_VECTORS].prot_pte |= cp->pte;
+ mem_types[MT_MINICLEAN].prot_sect &= ~PMD_SECT_TEX(1);
+ }
+
+ mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask;
+ mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask;
+ mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd;
+ mem_types[MT_ROM].prot_sect |= cp->pmd;
+
+ for (i = 0; i < 16; i++) {
+ unsigned long v = pgprot_val(protection_map[i]);
+ v &= (~(PTE_BUFFERABLE|PTE_CACHEABLE)) | cp->pte;
+ protection_map[i] = __pgprot(v);
+ }
+
+ pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG |
+ L_PTE_DIRTY | L_PTE_WRITE |
+ L_PTE_EXEC | cp->pte);
+
+ switch (cp->pmd) {
+ case PMD_SECT_WT:
+ mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WT;
+ break;
+ case PMD_SECT_WB:
+ case PMD_SECT_WBWA:
+ mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WB;
+ break;
+ }
+ printk("Memory policy: ECC %sabled, Data cache %s\n",
+ ecc_mask ? "en" : "dis", cp->policy);
+}
+
+#define vectors_base() (vectors_high() ? 0xffff0000 : 0)
+
+/*
+ * Create the page directory entries and any necessary
+ * page tables for the mapping specified by `md'. We
+ * are able to cope here with varying sizes and address
+ * offsets, and we take full advantage of sections and
+ * supersections.
+ */
+static void __init create_mapping(struct map_desc *md)
+{
+ unsigned long virt, length;
+ int prot_sect, prot_l1, domain;
+ pgprot_t prot_pte;
+ long off;
+
+ if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
+ printk(KERN_WARNING "BUG: not creating mapping for "
+ "0x%08lx at 0x%08lx in user region\n",
+ md->physical, md->virtual);
+ return;
+ }
+
+ if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
+ md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) {
+ printk(KERN_WARNING "BUG: mapping for 0x%08lx at 0x%08lx "
+ "overlaps vmalloc space\n",
+ md->physical, md->virtual);
+ }
+
+ domain = mem_types[md->type].domain;
+ prot_pte = __pgprot(mem_types[md->type].prot_pte);
+ prot_l1 = mem_types[md->type].prot_l1 | PMD_DOMAIN(domain);
+ prot_sect = mem_types[md->type].prot_sect | PMD_DOMAIN(domain);
+
+ virt = md->virtual;
+ off = md->physical - virt;
+ length = md->length;
+
+ if (mem_types[md->type].prot_l1 == 0 &&
+ (virt & 0xfffff || (virt + off) & 0xfffff || (virt + length) & 0xfffff)) {
+ printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can not "
+ "be mapped using pages, ignoring.\n",
+ md->physical, md->virtual);
+ return;
+ }
+
+ while ((virt & 0xfffff || (virt + off) & 0xfffff) && length >= PAGE_SIZE) {
+ alloc_init_page(virt, virt + off, prot_l1, prot_pte);
+
+ virt += PAGE_SIZE;
+ length -= PAGE_SIZE;
+ }
+
+ /* N.B. ARMv6 supersections are only defined to work with domain 0.
+ * Since domain assignments can in fact be arbitrary, the
+ * 'domain == 0' check below is required to insure that ARMv6
+ * supersections are only allocated for domain 0 regardless
+ * of the actual domain assignments in use.
+ */
+ if (cpu_architecture() >= CPU_ARCH_ARMv6 && domain == 0) {
+ /* Align to supersection boundary */
+ while ((virt & ~SUPERSECTION_MASK || (virt + off) &
+ ~SUPERSECTION_MASK) && length >= (PGDIR_SIZE / 2)) {
+ alloc_init_section(virt, virt + off, prot_sect);
+
+ virt += (PGDIR_SIZE / 2);
+ length -= (PGDIR_SIZE / 2);
+ }
+
+ while (length >= SUPERSECTION_SIZE) {
+ alloc_init_supersection(virt, virt + off, prot_sect);
+
+ virt += SUPERSECTION_SIZE;
+ length -= SUPERSECTION_SIZE;
+ }
+ }
+
+ /*
+ * A section mapping covers half a "pgdir" entry.
+ */
+ while (length >= (PGDIR_SIZE / 2)) {
+ alloc_init_section(virt, virt + off, prot_sect);
+
+ virt += (PGDIR_SIZE / 2);
+ length -= (PGDIR_SIZE / 2);
+ }
+
+ while (length >= PAGE_SIZE) {
+ alloc_init_page(virt, virt + off, prot_l1, prot_pte);
+
+ virt += PAGE_SIZE;
+ length -= PAGE_SIZE;
+ }
+}
+
+/*
+ * In order to soft-boot, we need to insert a 1:1 mapping in place of
+ * the user-mode pages. This will then ensure that we have predictable
+ * results when turning the mmu off
+ */
+void setup_mm_for_reboot(char mode)
+{
+ unsigned long pmdval;
+ pgd_t *pgd;
+ pmd_t *pmd;
+ int i;
+ int cpu_arch = cpu_architecture();
+
+ if (current->mm && current->mm->pgd)
+ pgd = current->mm->pgd;
+ else
+ pgd = init_mm.pgd;
+
+ for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++) {
+ pmdval = (i << PGDIR_SHIFT) |
+ PMD_SECT_AP_WRITE | PMD_SECT_AP_READ |
+ PMD_TYPE_SECT;
+ if (cpu_arch <= CPU_ARCH_ARMv5)
+ pmdval |= PMD_BIT4;
+ pmd = pmd_offset(pgd + i, i << PGDIR_SHIFT);
+ pmd[0] = __pmd(pmdval);
+ pmd[1] = __pmd(pmdval + (1 << (PGDIR_SHIFT - 1)));
+ flush_pmd_entry(pmd);
+ }
+}
+
+extern void _stext, _etext;
+
+/*
+ * Setup initial mappings. We use the page we allocated for zero page to hold
+ * the mappings, which will get overwritten by the vectors in traps_init().
+ * The mappings must be in virtual address order.
+ */
+void __init memtable_init(struct meminfo *mi)
+{
+ struct map_desc *init_maps, *p, *q;
+ unsigned long address = 0;
+ int i;
+
+ build_mem_type_table();
+
+ init_maps = p = alloc_bootmem_low_pages(PAGE_SIZE);
+
+#ifdef CONFIG_XIP_KERNEL
+ p->physical = CONFIG_XIP_PHYS_ADDR & PMD_MASK;
+ p->virtual = (unsigned long)&_stext & PMD_MASK;
+ p->length = ((unsigned long)&_etext - p->virtual + ~PMD_MASK) & PMD_MASK;
+ p->type = MT_ROM;
+ p ++;
+#endif
+
+ for (i = 0; i < mi->nr_banks; i++) {
+ if (mi->bank[i].size == 0)
+ continue;
+
+ p->physical = mi->bank[i].start;
+ p->virtual = __phys_to_virt(p->physical);
+ p->length = mi->bank[i].size;
+ p->type = MT_MEMORY;
+ p ++;
+ }
+
+#ifdef FLUSH_BASE
+ p->physical = FLUSH_BASE_PHYS;
+ p->virtual = FLUSH_BASE;
+ p->length = PGDIR_SIZE;
+ p->type = MT_CACHECLEAN;
+ p ++;
+#endif
+
+#ifdef FLUSH_BASE_MINICACHE
+ p->physical = FLUSH_BASE_PHYS + PGDIR_SIZE;
+ p->virtual = FLUSH_BASE_MINICACHE;
+ p->length = PGDIR_SIZE;
+ p->type = MT_MINICLEAN;
+ p ++;
+#endif
+
+ /*
+ * Go through the initial mappings, but clear out any
+ * pgdir entries that are not in the description.
+ */
+ q = init_maps;
+ do {
+ if (address < q->virtual || q == p) {
+ clear_mapping(address);
+ address += PGDIR_SIZE;
+ } else {
+ create_mapping(q);
+
+ address = q->virtual + q->length;
+ address = (address + PGDIR_SIZE - 1) & PGDIR_MASK;
+
+ q ++;
+ }
+ } while (address != 0);
+
+ /*
+ * Create a mapping for the machine vectors at the high-vectors
+ * location (0xffff0000). If we aren't using high-vectors, also
+ * create a mapping at the low-vectors virtual address.
+ */
+ init_maps->physical = virt_to_phys(init_maps);
+ init_maps->virtual = 0xffff0000;
+ init_maps->length = PAGE_SIZE;
+ init_maps->type = MT_HIGH_VECTORS;
+ create_mapping(init_maps);
+
+ if (!vectors_high()) {
+ init_maps->virtual = 0;
+ init_maps->type = MT_LOW_VECTORS;
+ create_mapping(init_maps);
+ }
+
+ flush_cache_all();
+ flush_tlb_all();
+}
+
+/*
+ * Create the architecture specific mappings
+ */
+void __init iotable_init(struct map_desc *io_desc, int nr)
+{
+ int i;
+
+ for (i = 0; i < nr; i++)
+ create_mapping(io_desc + i);
+}
+
+static inline void
+free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn)
+{
+ struct page *start_pg, *end_pg;
+ unsigned long pg, pgend;
+
+ /*
+ * Convert start_pfn/end_pfn to a struct page pointer.
+ */
+ start_pg = pfn_to_page(start_pfn);
+ end_pg = pfn_to_page(end_pfn);
+
+ /*
+ * Convert to physical addresses, and
+ * round start upwards and end downwards.
+ */
+ pg = PAGE_ALIGN(__pa(start_pg));
+ pgend = __pa(end_pg) & PAGE_MASK;
+
+ /*
+ * If there are free pages between these,
+ * free the section of the memmap array.
+ */
+ if (pg < pgend)
+ free_bootmem_node(NODE_DATA(node), pg, pgend - pg);
+}
+
+static inline void free_unused_memmap_node(int node, struct meminfo *mi)
+{
+ unsigned long bank_start, prev_bank_end = 0;
+ unsigned int i;
+
+ /*
+ * [FIXME] This relies on each bank being in address order. This
+ * may not be the case, especially if the user has provided the
+ * information on the command line.
+ */
+ for (i = 0; i < mi->nr_banks; i++) {
+ if (mi->bank[i].size == 0 || mi->bank[i].node != node)
+ continue;
+
+ bank_start = mi->bank[i].start >> PAGE_SHIFT;
+ if (bank_start < prev_bank_end) {
+ printk(KERN_ERR "MEM: unordered memory banks. "
+ "Not freeing memmap.\n");
+ break;
+ }
+
+ /*
+ * If we had a previous bank, and there is a space
+ * between the current bank and the previous, free it.
+ */
+ if (prev_bank_end && prev_bank_end != bank_start)
+ free_memmap(node, prev_bank_end, bank_start);
+
+ prev_bank_end = PAGE_ALIGN(mi->bank[i].start +
+ mi->bank[i].size) >> PAGE_SHIFT;
+ }
+}
+
+/*
+ * The mem_map array can get very big. Free
+ * the unused area of the memory map.
+ */
+void __init create_memmap_holes(struct meminfo *mi)
+{
+ int node;
+
+ for_each_online_node(node)
+ free_unused_memmap_node(node, mi);
+}
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
new file mode 100644
index 0000000..32c4b0e
--- /dev/null
+++ b/arch/arm/mm/mmap.c
@@ -0,0 +1,109 @@
+/*
+ * linux/arch/arm/mm/mmap.c
+ */
+#include <linux/config.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/mman.h>
+#include <linux/shm.h>
+
+#include <asm/system.h>
+
+#define COLOUR_ALIGN(addr,pgoff) \
+ ((((addr)+SHMLBA-1)&~(SHMLBA-1)) + \
+ (((pgoff)<<PAGE_SHIFT) & (SHMLBA-1)))
+
+/*
+ * We need to ensure that shared mappings are correctly aligned to
+ * avoid aliasing issues with VIPT caches. We need to ensure that
+ * a specific page of an object is always mapped at a multiple of
+ * SHMLBA bytes.
+ *
+ * We unconditionally provide this function for all cases, however
+ * in the VIVT case, we optimise out the alignment rules.
+ */
+unsigned long
+arch_get_unmapped_area(struct file *filp, unsigned long addr,
+ unsigned long len, unsigned long pgoff, unsigned long flags)
+{
+ struct mm_struct *mm = current->mm;
+ struct vm_area_struct *vma;
+ unsigned long start_addr;
+#ifdef CONFIG_CPU_V6
+ unsigned int cache_type;
+ int do_align = 0, aliasing = 0;
+
+ /*
+ * We only need to do colour alignment if either the I or D
+ * caches alias. This is indicated by bits 9 and 21 of the
+ * cache type register.
+ */
+ cache_type = read_cpuid(CPUID_CACHETYPE);
+ if (cache_type != read_cpuid(CPUID_ID)) {
+ aliasing = (cache_type | cache_type >> 12) & (1 << 11);
+ if (aliasing)
+ do_align = filp || flags & MAP_SHARED;
+ }
+#else
+#define do_align 0
+#define aliasing 0
+#endif
+
+ /*
+ * We should enforce the MAP_FIXED case. However, currently
+ * the generic kernel code doesn't allow us to handle this.
+ */
+ if (flags & MAP_FIXED) {
+ if (aliasing && flags & MAP_SHARED && addr & (SHMLBA - 1))
+ return -EINVAL;
+ return addr;
+ }
+
+ if (len > TASK_SIZE)
+ return -ENOMEM;
+
+ if (addr) {
+ if (do_align)
+ addr = COLOUR_ALIGN(addr, pgoff);
+ else
+ addr = PAGE_ALIGN(addr);
+
+ vma = find_vma(mm, addr);
+ if (TASK_SIZE - len >= addr &&
+ (!vma || addr + len <= vma->vm_start))
+ return addr;
+ }
+ start_addr = addr = mm->free_area_cache;
+
+full_search:
+ if (do_align)
+ addr = COLOUR_ALIGN(addr, pgoff);
+ else
+ addr = PAGE_ALIGN(addr);
+
+ for (vma = find_vma(mm, addr); ; vma = vma->vm_next) {
+ /* At this point: (!vma || addr < vma->vm_end). */
+ if (TASK_SIZE - len < addr) {
+ /*
+ * Start a new search - just in case we missed
+ * some holes.
+ */
+ if (start_addr != TASK_UNMAPPED_BASE) {
+ start_addr = addr = TASK_UNMAPPED_BASE;
+ goto full_search;
+ }
+ return -ENOMEM;
+ }
+ if (!vma || addr + len <= vma->vm_start) {
+ /*
+ * Remember the place where we stopped the search:
+ */
+ mm->free_area_cache = addr + len;
+ return addr;
+ }
+ addr = vma->vm_end;
+ if (do_align)
+ addr = COLOUR_ALIGN(addr, pgoff);
+ }
+}
+
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
new file mode 100644
index 0000000..0d90227
--- /dev/null
+++ b/arch/arm/mm/mmu.c
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/arm/mm/mmu.c
+ *
+ * Copyright (C) 2002-2003 Deep Blue Solutions Ltd, all rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+
+#include <asm/mmu_context.h>
+#include <asm/tlbflush.h>
+
+unsigned int cpu_last_asid = { 1 << ASID_BITS };
+
+/*
+ * We fork()ed a process, and we need a new context for the child
+ * to run in. We reserve version 0 for initial tasks so we will
+ * always allocate an ASID.
+ */
+void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+ mm->context.id = 0;
+}
+
+void __new_context(struct mm_struct *mm)
+{
+ unsigned int asid;
+
+ asid = ++cpu_last_asid;
+ if (asid == 0)
+ asid = cpu_last_asid = 1 << ASID_BITS;
+
+ /*
+ * If we've used up all our ASIDs, we need
+ * to start a new version and flush the TLB.
+ */
+ if ((asid & ~ASID_MASK) == 0)
+ flush_tlb_all();
+
+ mm->context.id = asid;
+}
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
new file mode 100644
index 0000000..1f32523
--- /dev/null
+++ b/arch/arm/mm/proc-arm1020.S
@@ -0,0 +1,530 @@
+/*
+ * linux/arch/arm/mm/proc-arm1020.S: MMU functions for ARM1020
+ *
+ * Copyright (C) 2000 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * These are the low level assembler for performing cache and TLB
+ * functions on the arm1020.
+ *
+ * CONFIG_CPU_ARM1020_CPU_IDLE -> nohlt
+ */
+#include <linux/linkage.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/constants.h>
+#include <asm/pgtable.h>
+#include <asm/procinfo.h>
+#include <asm/ptrace.h>
+#include <asm/hardware.h>
+
+/*
+ * This is the maximum size of an area which will be invalidated
+ * using the single invalidate entry instructions. Anything larger
+ * than this, and we go for the whole cache.
+ *
+ * This value should be chosen such that we choose the cheapest
+ * alternative.
+ */
+#define MAX_AREA_SIZE 32768
+
+/*
+ * The size of one data cache line.
+ */
+#define CACHE_DLINESIZE 32
+
+/*
+ * The number of data cache segments.
+ */
+#define CACHE_DSEGMENTS 16
+
+/*
+ * The number of lines in a cache segment.
+ */
+#define CACHE_DENTRIES 64
+
+/*
+ * This is the size at which it becomes more efficient to
+ * clean the whole cache, rather than using the individual
+ * cache line maintainence instructions.
+ */
+#define CACHE_DLIMIT 32768
+
+ .text
+/*
+ * cpu_arm1020_proc_init()
+ */
+ENTRY(cpu_arm1020_proc_init)
+ mov pc, lr
+
+/*
+ * cpu_arm1020_proc_fin()
+ */
+ENTRY(cpu_arm1020_proc_fin)
+ stmfd sp!, {lr}
+ mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+ msr cpsr_c, ip
+ bl arm1020_flush_kern_cache_all
+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
+ bic r0, r0, #0x1000 @ ...i............
+ bic r0, r0, #0x000e @ ............wca.
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ ldmfd sp!, {pc}
+
+/*
+ * cpu_arm1020_reset(loc)
+ *
+ * Perform a soft reset of the system. Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ */
+ .align 5
+ENTRY(cpu_arm1020_reset)
+ mov ip, #0
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mrc p15, 0, ip, c1, c0, 0 @ ctrl register
+ bic ip, ip, #0x000f @ ............wcam
+ bic ip, ip, #0x1100 @ ...i...s........
+ mcr p15, 0, ip, c1, c0, 0 @ ctrl register
+ mov pc, r0
+
+/*
+ * cpu_arm1020_do_idle()
+ */
+ .align 5
+ENTRY(cpu_arm1020_do_idle)
+ mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
+ mov pc, lr
+
+/* ================================= CACHE ================================ */
+
+ .align 5
+/*
+ * flush_user_cache_all()
+ *
+ * Invalidate all cache entries in a particular address
+ * space.
+ */
+ENTRY(arm1020_flush_user_cache_all)
+ /* FALLTHROUGH */
+/*
+ * flush_kern_cache_all()
+ *
+ * Clean and invalidate the entire cache.
+ */
+ENTRY(arm1020_flush_kern_cache_all)
+ mov r2, #VM_EXEC
+ mov ip, #0
+__flush_whole_cache:
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov r1, #(CACHE_DSEGMENTS - 1) << 5 @ 16 segments
+1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
+2: mcr p15, 0, r3, c7, c14, 2 @ clean+invalidate D index
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ subs r3, r3, #1 << 26
+ bcs 2b @ entries 63 to 0
+ subs r1, r1, #1 << 5
+ bcs 1b @ segments 15 to 0
+#endif
+ tst r2, #VM_EXEC
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
+#endif
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * flush_user_cache_range(start, end, flags)
+ *
+ * Invalidate a range of cache entries in the specified
+ * address space.
+ *
+ * - start - start address (inclusive)
+ * - end - end address (exclusive)
+ * - flags - vm_flags for this space
+ */
+ENTRY(arm1020_flush_user_cache_range)
+ mov ip, #0
+ sub r3, r1, r0 @ calculate total size
+ cmp r3, #CACHE_DLIMIT
+ bhs __flush_whole_cache
+
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mcr p15, 0, ip, c7, c10, 4
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ tst r2, #VM_EXEC
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
+#endif
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * coherent_kern_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm1020_coherent_kern_range)
+ /* FALLTRHOUGH */
+
+/*
+ * coherent_user_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm1020_coherent_user_range)
+ mov ip, #0
+ bic r0, r0, #CACHE_DLINESIZE - 1
+ mcr p15, 0, ip, c7, c10, 4
+1:
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+#endif
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
+#endif
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * flush_kern_dcache_page(void *page)
+ *
+ * Ensure no D cache aliasing occurs, either with itself or
+ * the I cache
+ *
+ * - page - page aligned address
+ */
+ENTRY(arm1020_flush_kern_dcache_page)
+ mov ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ add r1, r0, #PAGE_SZ
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_inv_range(start, end)
+ *
+ * Invalidate (discard) the specified virtual address range.
+ * May not write back any entries. If 'start' or 'end'
+ * are not cache line aligned, those lines must be written
+ * back.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(arm1020_dma_inv_range)
+ mov ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ tst r0, #CACHE_DLINESIZE - 1
+ bic r0, r0, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, ip, c7, c10, 4
+ mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ tst r1, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, ip, c7, c10, 4
+ mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_clean_range(start, end)
+ *
+ * Clean the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(arm1020_dma_clean_range)
+ mov ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_flush_range(start, end)
+ *
+ * Clean and invalidate the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm1020_dma_flush_range)
+ mov ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ bic r0, r0, #CACHE_DLINESIZE - 1
+ mcr p15, 0, ip, c7, c10, 4
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+ENTRY(arm1020_cache_fns)
+ .long arm1020_flush_kern_cache_all
+ .long arm1020_flush_user_cache_all
+ .long arm1020_flush_user_cache_range
+ .long arm1020_coherent_kern_range
+ .long arm1020_coherent_user_range
+ .long arm1020_flush_kern_dcache_page
+ .long arm1020_dma_inv_range
+ .long arm1020_dma_clean_range
+ .long arm1020_dma_flush_range
+
+ .align 5
+ENTRY(cpu_arm1020_dcache_clean_area)
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mov ip, #0
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ add r0, r0, #CACHE_DLINESIZE
+ subs r1, r1, #CACHE_DLINESIZE
+ bhi 1b
+#endif
+ mov pc, lr
+
+/* =============================== PageTable ============================== */
+
+/*
+ * cpu_arm1020_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+ .align 5
+ENTRY(cpu_arm1020_switch_mm)
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mcr p15, 0, r3, c7, c10, 4
+ mov r1, #0xF @ 16 segments
+1: mov r3, #0x3F @ 64 entries
+2: mov ip, r3, LSL #26 @ shift up entry
+ orr ip, ip, r1, LSL #5 @ shift in/up index
+ mcr p15, 0, ip, c7, c14, 2 @ Clean & Inval DCache entry
+ mov ip, #0
+ mcr p15, 0, ip, c7, c10, 4
+ subs r3, r3, #1
+ cmp r3, #0
+ bge 2b @ entries 3F to 0
+ subs r1, r1, #1
+ cmp r1, #0
+ bge 1b @ segments 15 to 0
+
+#endif
+ mov r1, #0
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mcr p15, 0, r1, c7, c5, 0 @ invalidate I cache
+#endif
+ mcr p15, 0, r1, c7, c10, 4 @ drain WB
+ mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
+ mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
+ mov pc, lr
+
+/*
+ * cpu_arm1020_set_pte(ptep, pte)
+ *
+ * Set a PTE and flush it out
+ */
+ .align 5
+ENTRY(cpu_arm1020_set_pte)
+ str r1, [r0], #-2048 @ linux version
+
+ eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+
+ bic r2, r1, #PTE_SMALL_AP_MASK
+ bic r2, r2, #PTE_TYPE_MASK
+ orr r2, r2, #PTE_TYPE_SMALL
+
+ tst r1, #L_PTE_USER @ User?
+ orrne r2, r2, #PTE_SMALL_AP_URO_SRW
+
+ tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
+ orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
+
+ tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
+ movne r2, #0
+
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ eor r3, r1, #0x0a @ C & small page?
+ tst r3, #0x0b
+ biceq r2, r2, #4
+#endif
+ str r2, [r0] @ hardware version
+ mov r0, r0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mcr p15, 0, r0, c7, c10, 4
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+#endif
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+ __INIT
+
+ .type __arm1020_setup, #function
+__arm1020_setup:
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
+ mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
+ mrc p15, 0, r0, c1, c0 @ get control register v4
+ ldr r5, arm1020_cr1_clear
+ bic r0, r0, r5
+ ldr r5, arm1020_cr1_set
+ orr r0, r0, r5
+#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
+ orr r0, r0, #0x4000 @ .R.. .... .... ....
+#endif
+ mov pc, lr
+ .size __arm1020_setup, . - __arm1020_setup
+
+ /*
+ * R
+ * .RVI ZFRS BLDP WCAM
+ * .0.1 1001 ..11 0101 /* FIXME: why no V bit? */
+ */
+ .type arm1020_cr1_clear, #object
+ .type arm1020_cr1_set, #object
+arm1020_cr1_clear:
+ .word 0x593f
+arm1020_cr1_set:
+ .word 0x1935
+
+ __INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ * come through these
+ */
+ .type arm1020_processor_functions, #object
+arm1020_processor_functions:
+ .word v4t_early_abort
+ .word cpu_arm1020_proc_init
+ .word cpu_arm1020_proc_fin
+ .word cpu_arm1020_reset
+ .word cpu_arm1020_do_idle
+ .word cpu_arm1020_dcache_clean_area
+ .word cpu_arm1020_switch_mm
+ .word cpu_arm1020_set_pte
+ .size arm1020_processor_functions, . - arm1020_processor_functions
+
+ .section ".rodata"
+
+ .type cpu_arch_name, #object
+cpu_arch_name:
+ .asciz "armv5t"
+ .size cpu_arch_name, . - cpu_arch_name
+
+ .type cpu_elf_name, #object
+cpu_elf_name:
+ .asciz "v5"
+ .size cpu_elf_name, . - cpu_elf_name
+
+ .type cpu_arm1020_name, #object
+cpu_arm1020_name:
+ .ascii "ARM1020"
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ .ascii "i"
+#endif
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ .ascii "d"
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ .ascii "(wt)"
+#else
+ .ascii "(wb)"
+#endif
+#endif
+#ifndef CONFIG_CPU_BPREDICT_DISABLE
+ .ascii "B"
+#endif
+#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
+ .ascii "RR"
+#endif
+ .ascii "\0"
+ .size cpu_arm1020_name, . - cpu_arm1020_name
+
+ .align
+
+ .section ".proc.info", #alloc, #execinstr
+
+ .type __arm1020_proc_info,#object
+__arm1020_proc_info:
+ .long 0x4104a200 @ ARM 1020T (Architecture v5T)
+ .long 0xff0ffff0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __arm1020_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB
+ .long cpu_arm1020_name
+ .long arm1020_processor_functions
+ .long v4wbi_tlb_fns
+ .long v4wb_user_fns
+ .long arm1020_cache_fns
+ .size __arm1020_proc_info, . - __arm1020_proc_info
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
new file mode 100644
index 0000000..142a2c2
--- /dev/null
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -0,0 +1,513 @@
+/*
+ * linux/arch/arm/mm/proc-arm1020e.S: MMU functions for ARM1020
+ *
+ * Copyright (C) 2000 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * These are the low level assembler for performing cache and TLB
+ * functions on the arm1020e.
+ *
+ * CONFIG_CPU_ARM1020_CPU_IDLE -> nohlt
+ */
+#include <linux/linkage.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/constants.h>
+#include <asm/pgtable.h>
+#include <asm/procinfo.h>
+#include <asm/ptrace.h>
+#include <asm/hardware.h>
+
+/*
+ * This is the maximum size of an area which will be invalidated
+ * using the single invalidate entry instructions. Anything larger
+ * than this, and we go for the whole cache.
+ *
+ * This value should be chosen such that we choose the cheapest
+ * alternative.
+ */
+#define MAX_AREA_SIZE 32768
+
+/*
+ * The size of one data cache line.
+ */
+#define CACHE_DLINESIZE 32
+
+/*
+ * The number of data cache segments.
+ */
+#define CACHE_DSEGMENTS 16
+
+/*
+ * The number of lines in a cache segment.
+ */
+#define CACHE_DENTRIES 64
+
+/*
+ * This is the size at which it becomes more efficient to
+ * clean the whole cache, rather than using the individual
+ * cache line maintainence instructions.
+ */
+#define CACHE_DLIMIT 32768
+
+ .text
+/*
+ * cpu_arm1020e_proc_init()
+ */
+ENTRY(cpu_arm1020e_proc_init)
+ mov pc, lr
+
+/*
+ * cpu_arm1020e_proc_fin()
+ */
+ENTRY(cpu_arm1020e_proc_fin)
+ stmfd sp!, {lr}
+ mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+ msr cpsr_c, ip
+ bl arm1020e_flush_kern_cache_all
+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
+ bic r0, r0, #0x1000 @ ...i............
+ bic r0, r0, #0x000e @ ............wca.
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ ldmfd sp!, {pc}
+
+/*
+ * cpu_arm1020e_reset(loc)
+ *
+ * Perform a soft reset of the system. Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ */
+ .align 5
+ENTRY(cpu_arm1020e_reset)
+ mov ip, #0
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mrc p15, 0, ip, c1, c0, 0 @ ctrl register
+ bic ip, ip, #0x000f @ ............wcam
+ bic ip, ip, #0x1100 @ ...i...s........
+ mcr p15, 0, ip, c1, c0, 0 @ ctrl register
+ mov pc, r0
+
+/*
+ * cpu_arm1020e_do_idle()
+ */
+ .align 5
+ENTRY(cpu_arm1020e_do_idle)
+ mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
+ mov pc, lr
+
+/* ================================= CACHE ================================ */
+
+ .align 5
+/*
+ * flush_user_cache_all()
+ *
+ * Invalidate all cache entries in a particular address
+ * space.
+ */
+ENTRY(arm1020e_flush_user_cache_all)
+ /* FALLTHROUGH */
+/*
+ * flush_kern_cache_all()
+ *
+ * Clean and invalidate the entire cache.
+ */
+ENTRY(arm1020e_flush_kern_cache_all)
+ mov r2, #VM_EXEC
+ mov ip, #0
+__flush_whole_cache:
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov r1, #(CACHE_DSEGMENTS - 1) << 5 @ 16 segments
+1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
+2: mcr p15, 0, r3, c7, c14, 2 @ clean+invalidate D index
+ subs r3, r3, #1 << 26
+ bcs 2b @ entries 63 to 0
+ subs r1, r1, #1 << 5
+ bcs 1b @ segments 15 to 0
+#endif
+ tst r2, #VM_EXEC
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
+#endif
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * flush_user_cache_range(start, end, flags)
+ *
+ * Invalidate a range of cache entries in the specified
+ * address space.
+ *
+ * - start - start address (inclusive)
+ * - end - end address (exclusive)
+ * - flags - vm_flags for this space
+ */
+ENTRY(arm1020e_flush_user_cache_range)
+ mov ip, #0
+ sub r3, r1, r0 @ calculate total size
+ cmp r3, #CACHE_DLIMIT
+ bhs __flush_whole_cache
+
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ tst r2, #VM_EXEC
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
+#endif
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * coherent_kern_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm1020e_coherent_kern_range)
+ /* FALLTHROUGH */
+/*
+ * coherent_user_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm1020e_coherent_user_range)
+ mov ip, #0
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1:
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+#endif
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
+#endif
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * flush_kern_dcache_page(void *page)
+ *
+ * Ensure no D cache aliasing occurs, either with itself or
+ * the I cache
+ *
+ * - page - page aligned address
+ */
+ENTRY(arm1020e_flush_kern_dcache_page)
+ mov ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ add r1, r0, #PAGE_SZ
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_inv_range(start, end)
+ *
+ * Invalidate (discard) the specified virtual address range.
+ * May not write back any entries. If 'start' or 'end'
+ * are not cache line aligned, those lines must be written
+ * back.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(arm1020e_dma_inv_range)
+ mov ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ tst r0, #CACHE_DLINESIZE - 1
+ bic r0, r0, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
+ tst r1, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
+1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_clean_range(start, end)
+ *
+ * Clean the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(arm1020e_dma_clean_range)
+ mov ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_flush_range(start, end)
+ *
+ * Clean and invalidate the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm1020e_dma_flush_range)
+ mov ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+ENTRY(arm1020e_cache_fns)
+ .long arm1020e_flush_kern_cache_all
+ .long arm1020e_flush_user_cache_all
+ .long arm1020e_flush_user_cache_range
+ .long arm1020e_coherent_kern_range
+ .long arm1020e_coherent_user_range
+ .long arm1020e_flush_kern_dcache_page
+ .long arm1020e_dma_inv_range
+ .long arm1020e_dma_clean_range
+ .long arm1020e_dma_flush_range
+
+ .align 5
+ENTRY(cpu_arm1020e_dcache_clean_area)
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mov ip, #0
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ subs r1, r1, #CACHE_DLINESIZE
+ bhi 1b
+#endif
+ mov pc, lr
+
+/* =============================== PageTable ============================== */
+
+/*
+ * cpu_arm1020e_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+ .align 5
+ENTRY(cpu_arm1020e_switch_mm)
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mcr p15, 0, r3, c7, c10, 4
+ mov r1, #0xF @ 16 segments
+1: mov r3, #0x3F @ 64 entries
+2: mov ip, r3, LSL #26 @ shift up entry
+ orr ip, ip, r1, LSL #5 @ shift in/up index
+ mcr p15, 0, ip, c7, c14, 2 @ Clean & Inval DCache entry
+ mov ip, #0
+ subs r3, r3, #1
+ cmp r3, #0
+ bge 2b @ entries 3F to 0
+ subs r1, r1, #1
+ cmp r1, #0
+ bge 1b @ segments 15 to 0
+
+#endif
+ mov r1, #0
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mcr p15, 0, r1, c7, c5, 0 @ invalidate I cache
+#endif
+ mcr p15, 0, r1, c7, c10, 4 @ drain WB
+ mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
+ mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
+ mov pc, lr
+
+/*
+ * cpu_arm1020e_set_pte(ptep, pte)
+ *
+ * Set a PTE and flush it out
+ */
+ .align 5
+ENTRY(cpu_arm1020e_set_pte)
+ str r1, [r0], #-2048 @ linux version
+
+ eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+
+ bic r2, r1, #PTE_SMALL_AP_MASK
+ bic r2, r2, #PTE_TYPE_MASK
+ orr r2, r2, #PTE_TYPE_SMALL
+
+ tst r1, #L_PTE_USER @ User?
+ orrne r2, r2, #PTE_SMALL_AP_URO_SRW
+
+ tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
+ orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
+
+ tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
+ movne r2, #0
+
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ eor r3, r1, #0x0a @ C & small page?
+ tst r3, #0x0b
+ biceq r2, r2, #4
+#endif
+ str r2, [r0] @ hardware version
+ mov r0, r0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+#endif
+ mov pc, lr
+
+ __INIT
+
+ .type __arm1020e_setup, #function
+__arm1020e_setup:
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
+ mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
+ mrc p15, 0, r0, c1, c0 @ get control register v4
+ ldr r5, arm1020e_cr1_clear
+ bic r0, r0, r5
+ ldr r5, arm1020e_cr1_set
+ orr r0, r0, r5
+#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
+ orr r0, r0, #0x4000 @ .R.. .... .... ....
+#endif
+ mov pc, lr
+ .size __arm1020e_setup, . - __arm1020e_setup
+
+ /*
+ * R
+ * .RVI ZFRS BLDP WCAM
+ * .0.1 1001 ..11 0101 /* FIXME: why no V bit? */
+ */
+ .type arm1020e_cr1_clear, #object
+ .type arm1020e_cr1_set, #object
+arm1020e_cr1_clear:
+ .word 0x5f3f
+arm1020e_cr1_set:
+ .word 0x1935
+
+ __INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ * come through these
+ */
+ .type arm1020e_processor_functions, #object
+arm1020e_processor_functions:
+ .word v4t_early_abort
+ .word cpu_arm1020e_proc_init
+ .word cpu_arm1020e_proc_fin
+ .word cpu_arm1020e_reset
+ .word cpu_arm1020e_do_idle
+ .word cpu_arm1020e_dcache_clean_area
+ .word cpu_arm1020e_switch_mm
+ .word cpu_arm1020e_set_pte
+ .size arm1020e_processor_functions, . - arm1020e_processor_functions
+
+ .section ".rodata"
+
+ .type cpu_arch_name, #object
+cpu_arch_name:
+ .asciz "armv5te"
+ .size cpu_arch_name, . - cpu_arch_name
+
+ .type cpu_elf_name, #object
+cpu_elf_name:
+ .asciz "v5"
+ .size cpu_elf_name, . - cpu_elf_name
+
+ .type cpu_arm1020e_name, #object
+cpu_arm1020e_name:
+ .ascii "ARM1020E"
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ .ascii "i"
+#endif
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ .ascii "d"
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ .ascii "(wt)"
+#else
+ .ascii "(wb)"
+#endif
+#endif
+#ifndef CONFIG_CPU_BPREDICT_DISABLE
+ .ascii "B"
+#endif
+#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
+ .ascii "RR"
+#endif
+ .ascii "\0"
+ .size cpu_arm1020e_name, . - cpu_arm1020e_name
+
+ .align
+
+ .section ".proc.info", #alloc, #execinstr
+
+ .type __arm1020e_proc_info,#object
+__arm1020e_proc_info:
+ .long 0x4105a200 @ ARM 1020TE (Architecture v5TE)
+ .long 0xff0ffff0
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __arm1020e_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_EDSP
+ .long cpu_arm1020e_name
+ .long arm1020e_processor_functions
+ .long v4wbi_tlb_fns
+ .long v4wb_user_fns
+ .long arm1020e_cache_fns
+ .size __arm1020e_proc_info, . - __arm1020e_proc_info
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
new file mode 100644
index 0000000..747ed963
--- /dev/null
+++ b/arch/arm/mm/proc-arm1022.S
@@ -0,0 +1,495 @@
+/*
+ * linux/arch/arm/mm/proc-arm1022.S: MMU functions for ARM1022E
+ *
+ * Copyright (C) 2000 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *
+ * These are the low level assembler for performing cache and TLB
+ * functions on the ARM1022E.
+ */
+#include <linux/linkage.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/constants.h>
+#include <asm/pgtable.h>
+#include <asm/procinfo.h>
+#include <asm/ptrace.h>
+
+/*
+ * This is the maximum size of an area which will be invalidated
+ * using the single invalidate entry instructions. Anything larger
+ * than this, and we go for the whole cache.
+ *
+ * This value should be chosen such that we choose the cheapest
+ * alternative.
+ */
+#define MAX_AREA_SIZE 32768
+
+/*
+ * The size of one data cache line.
+ */
+#define CACHE_DLINESIZE 32
+
+/*
+ * The number of data cache segments.
+ */
+#define CACHE_DSEGMENTS 16
+
+/*
+ * The number of lines in a cache segment.
+ */
+#define CACHE_DENTRIES 64
+
+/*
+ * This is the size at which it becomes more efficient to
+ * clean the whole cache, rather than using the individual
+ * cache line maintainence instructions.
+ */
+#define CACHE_DLIMIT 32768
+
+ .text
+/*
+ * cpu_arm1022_proc_init()
+ */
+ENTRY(cpu_arm1022_proc_init)
+ mov pc, lr
+
+/*
+ * cpu_arm1022_proc_fin()
+ */
+ENTRY(cpu_arm1022_proc_fin)
+ stmfd sp!, {lr}
+ mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+ msr cpsr_c, ip
+ bl arm1022_flush_kern_cache_all
+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
+ bic r0, r0, #0x1000 @ ...i............
+ bic r0, r0, #0x000e @ ............wca.
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ ldmfd sp!, {pc}
+
+/*
+ * cpu_arm1022_reset(loc)
+ *
+ * Perform a soft reset of the system. Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ */
+ .align 5
+ENTRY(cpu_arm1022_reset)
+ mov ip, #0
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mrc p15, 0, ip, c1, c0, 0 @ ctrl register
+ bic ip, ip, #0x000f @ ............wcam
+ bic ip, ip, #0x1100 @ ...i...s........
+ mcr p15, 0, ip, c1, c0, 0 @ ctrl register
+ mov pc, r0
+
+/*
+ * cpu_arm1022_do_idle()
+ */
+ .align 5
+ENTRY(cpu_arm1022_do_idle)
+ mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
+ mov pc, lr
+
+/* ================================= CACHE ================================ */
+
+ .align 5
+/*
+ * flush_user_cache_all()
+ *
+ * Invalidate all cache entries in a particular address
+ * space.
+ */
+ENTRY(arm1022_flush_user_cache_all)
+ /* FALLTHROUGH */
+/*
+ * flush_kern_cache_all()
+ *
+ * Clean and invalidate the entire cache.
+ */
+ENTRY(arm1022_flush_kern_cache_all)
+ mov r2, #VM_EXEC
+ mov ip, #0
+__flush_whole_cache:
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mov r1, #(CACHE_DSEGMENTS - 1) << 5 @ 16 segments
+1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
+2: mcr p15, 0, r3, c7, c14, 2 @ clean+invalidate D index
+ subs r3, r3, #1 << 26
+ bcs 2b @ entries 63 to 0
+ subs r1, r1, #1 << 5
+ bcs 1b @ segments 15 to 0
+#endif
+ tst r2, #VM_EXEC
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
+#endif
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * flush_user_cache_range(start, end, flags)
+ *
+ * Invalidate a range of cache entries in the specified
+ * address space.
+ *
+ * - start - start address (inclusive)
+ * - end - end address (exclusive)
+ * - flags - vm_flags for this space
+ */
+ENTRY(arm1022_flush_user_cache_range)
+ mov ip, #0
+ sub r3, r1, r0 @ calculate total size
+ cmp r3, #CACHE_DLIMIT
+ bhs __flush_whole_cache
+
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ tst r2, #VM_EXEC
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
+#endif
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * coherent_kern_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm1022_coherent_kern_range)
+ /* FALLTHROUGH */
+
+/*
+ * coherent_user_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm1022_coherent_user_range)
+ mov ip, #0
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1:
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+#endif
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
+#endif
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * flush_kern_dcache_page(void *page)
+ *
+ * Ensure no D cache aliasing occurs, either with itself or
+ * the I cache
+ *
+ * - page - page aligned address
+ */
+ENTRY(arm1022_flush_kern_dcache_page)
+ mov ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ add r1, r0, #PAGE_SZ
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_inv_range(start, end)
+ *
+ * Invalidate (discard) the specified virtual address range.
+ * May not write back any entries. If 'start' or 'end'
+ * are not cache line aligned, those lines must be written
+ * back.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(arm1022_dma_inv_range)
+ mov ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ tst r0, #CACHE_DLINESIZE - 1
+ bic r0, r0, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
+ tst r1, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
+1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_clean_range(start, end)
+ *
+ * Clean the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(arm1022_dma_clean_range)
+ mov ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_flush_range(start, end)
+ *
+ * Clean and invalidate the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm1022_dma_flush_range)
+ mov ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+ENTRY(arm1022_cache_fns)
+ .long arm1022_flush_kern_cache_all
+ .long arm1022_flush_user_cache_all
+ .long arm1022_flush_user_cache_range
+ .long arm1022_coherent_kern_range
+ .long arm1022_coherent_user_range
+ .long arm1022_flush_kern_dcache_page
+ .long arm1022_dma_inv_range
+ .long arm1022_dma_clean_range
+ .long arm1022_dma_flush_range
+
+ .align 5
+ENTRY(cpu_arm1022_dcache_clean_area)
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mov ip, #0
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ subs r1, r1, #CACHE_DLINESIZE
+ bhi 1b
+#endif
+ mov pc, lr
+
+/* =============================== PageTable ============================== */
+
+/*
+ * cpu_arm1022_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+ .align 5
+ENTRY(cpu_arm1022_switch_mm)
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mov r1, #(CACHE_DSEGMENTS - 1) << 5 @ 16 segments
+1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
+2: mcr p15, 0, r3, c7, c14, 2 @ clean+invalidate D index
+ subs r3, r3, #1 << 26
+ bcs 2b @ entries 63 to 0
+ subs r1, r1, #1 << 5
+ bcs 1b @ segments 15 to 0
+#endif
+ mov r1, #0
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mcr p15, 0, r1, c7, c5, 0 @ invalidate I cache
+#endif
+ mcr p15, 0, r1, c7, c10, 4 @ drain WB
+ mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
+ mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
+ mov pc, lr
+
+/*
+ * cpu_arm1022_set_pte(ptep, pte)
+ *
+ * Set a PTE and flush it out
+ */
+ .align 5
+ENTRY(cpu_arm1022_set_pte)
+ str r1, [r0], #-2048 @ linux version
+
+ eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+
+ bic r2, r1, #PTE_SMALL_AP_MASK
+ bic r2, r2, #PTE_TYPE_MASK
+ orr r2, r2, #PTE_TYPE_SMALL
+
+ tst r1, #L_PTE_USER @ User?
+ orrne r2, r2, #PTE_SMALL_AP_URO_SRW
+
+ tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
+ orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
+
+ tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
+ movne r2, #0
+
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ eor r3, r1, #0x0a @ C & small page?
+ tst r3, #0x0b
+ biceq r2, r2, #4
+#endif
+ str r2, [r0] @ hardware version
+ mov r0, r0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+#endif
+ mov pc, lr
+
+ __INIT
+
+ .type __arm1022_setup, #function
+__arm1022_setup:
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
+ mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
+ mrc p15, 0, r0, c1, c0 @ get control register v4
+ ldr r5, arm1022_cr1_clear
+ bic r0, r0, r5
+ ldr r5, arm1022_cr1_set
+ orr r0, r0, r5
+#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
+ orr r0, r0, #0x4000 @ .R..............
+#endif
+ mov pc, lr
+ .size __arm1022_setup, . - __arm1022_setup
+
+ /*
+ * R
+ * .RVI ZFRS BLDP WCAM
+ * .011 1001 ..11 0101
+ *
+ */
+ .type arm1022_cr1_clear, #object
+ .type arm1022_cr1_set, #object
+arm1022_cr1_clear:
+ .word 0x7f3f
+arm1022_cr1_set:
+ .word 0x3935
+
+ __INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ * come through these
+ */
+ .type arm1022_processor_functions, #object
+arm1022_processor_functions:
+ .word v4t_early_abort
+ .word cpu_arm1022_proc_init
+ .word cpu_arm1022_proc_fin
+ .word cpu_arm1022_reset
+ .word cpu_arm1022_do_idle
+ .word cpu_arm1022_dcache_clean_area
+ .word cpu_arm1022_switch_mm
+ .word cpu_arm1022_set_pte
+ .size arm1022_processor_functions, . - arm1022_processor_functions
+
+ .section ".rodata"
+
+ .type cpu_arch_name, #object
+cpu_arch_name:
+ .asciz "armv5te"
+ .size cpu_arch_name, . - cpu_arch_name
+
+ .type cpu_elf_name, #object
+cpu_elf_name:
+ .asciz "v5"
+ .size cpu_elf_name, . - cpu_elf_name
+
+ .type cpu_arm1022_name, #object
+cpu_arm1022_name:
+ .ascii "arm1022"
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ .ascii "i"
+#endif
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ .ascii "d"
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ .ascii "(wt)"
+#else
+ .ascii "(wb)"
+#endif
+#endif
+#ifndef CONFIG_CPU_BPREDICT_DISABLE
+ .ascii "B"
+#endif
+#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
+ .ascii "RR"
+#endif
+ .ascii "\0"
+ .size cpu_arm1022_name, . - cpu_arm1022_name
+
+ .align
+
+ .section ".proc.info", #alloc, #execinstr
+
+ .type __arm1022_proc_info,#object
+__arm1022_proc_info:
+ .long 0x4105a220 @ ARM 1022E (v5TE)
+ .long 0xff0ffff0
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __arm1022_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_EDSP
+ .long cpu_arm1022_name
+ .long arm1022_processor_functions
+ .long v4wbi_tlb_fns
+ .long v4wb_user_fns
+ .long arm1022_cache_fns
+ .size __arm1022_proc_info, . - __arm1022_proc_info
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
new file mode 100644
index 0000000..248110c
--- /dev/null
+++ b/arch/arm/mm/proc-arm1026.S
@@ -0,0 +1,491 @@
+/*
+ * linux/arch/arm/mm/proc-arm1026.S: MMU functions for ARM1026EJ-S
+ *
+ * Copyright (C) 2000 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *
+ * These are the low level assembler for performing cache and TLB
+ * functions on the ARM1026EJ-S.
+ */
+#include <linux/linkage.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/constants.h>
+#include <asm/pgtable.h>
+#include <asm/procinfo.h>
+#include <asm/ptrace.h>
+
+/*
+ * This is the maximum size of an area which will be invalidated
+ * using the single invalidate entry instructions. Anything larger
+ * than this, and we go for the whole cache.
+ *
+ * This value should be chosen such that we choose the cheapest
+ * alternative.
+ */
+#define MAX_AREA_SIZE 32768
+
+/*
+ * The size of one data cache line.
+ */
+#define CACHE_DLINESIZE 32
+
+/*
+ * The number of data cache segments.
+ */
+#define CACHE_DSEGMENTS 16
+
+/*
+ * The number of lines in a cache segment.
+ */
+#define CACHE_DENTRIES 64
+
+/*
+ * This is the size at which it becomes more efficient to
+ * clean the whole cache, rather than using the individual
+ * cache line maintainence instructions.
+ */
+#define CACHE_DLIMIT 32768
+
+ .text
+/*
+ * cpu_arm1026_proc_init()
+ */
+ENTRY(cpu_arm1026_proc_init)
+ mov pc, lr
+
+/*
+ * cpu_arm1026_proc_fin()
+ */
+ENTRY(cpu_arm1026_proc_fin)
+ stmfd sp!, {lr}
+ mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+ msr cpsr_c, ip
+ bl arm1026_flush_kern_cache_all
+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
+ bic r0, r0, #0x1000 @ ...i............
+ bic r0, r0, #0x000e @ ............wca.
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ ldmfd sp!, {pc}
+
+/*
+ * cpu_arm1026_reset(loc)
+ *
+ * Perform a soft reset of the system. Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ */
+ .align 5
+ENTRY(cpu_arm1026_reset)
+ mov ip, #0
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mrc p15, 0, ip, c1, c0, 0 @ ctrl register
+ bic ip, ip, #0x000f @ ............wcam
+ bic ip, ip, #0x1100 @ ...i...s........
+ mcr p15, 0, ip, c1, c0, 0 @ ctrl register
+ mov pc, r0
+
+/*
+ * cpu_arm1026_do_idle()
+ */
+ .align 5
+ENTRY(cpu_arm1026_do_idle)
+ mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
+ mov pc, lr
+
+/* ================================= CACHE ================================ */
+
+ .align 5
+/*
+ * flush_user_cache_all()
+ *
+ * Invalidate all cache entries in a particular address
+ * space.
+ */
+ENTRY(arm1026_flush_user_cache_all)
+ /* FALLTHROUGH */
+/*
+ * flush_kern_cache_all()
+ *
+ * Clean and invalidate the entire cache.
+ */
+ENTRY(arm1026_flush_kern_cache_all)
+ mov r2, #VM_EXEC
+ mov ip, #0
+__flush_whole_cache:
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+1: mrc p15, 0, r15, c7, c14, 3 @ test, clean, invalidate
+ bne 1b
+#endif
+ tst r2, #VM_EXEC
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
+#endif
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * flush_user_cache_range(start, end, flags)
+ *
+ * Invalidate a range of cache entries in the specified
+ * address space.
+ *
+ * - start - start address (inclusive)
+ * - end - end address (exclusive)
+ * - flags - vm_flags for this space
+ */
+ENTRY(arm1026_flush_user_cache_range)
+ mov ip, #0
+ sub r3, r1, r0 @ calculate total size
+ cmp r3, #CACHE_DLIMIT
+ bhs __flush_whole_cache
+
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ tst r2, #VM_EXEC
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
+#endif
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * coherent_kern_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm1026_coherent_kern_range)
+ /* FALLTHROUGH */
+/*
+ * coherent_user_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm1026_coherent_user_range)
+ mov ip, #0
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1:
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+#endif
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
+#endif
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * flush_kern_dcache_page(void *page)
+ *
+ * Ensure no D cache aliasing occurs, either with itself or
+ * the I cache
+ *
+ * - page - page aligned address
+ */
+ENTRY(arm1026_flush_kern_dcache_page)
+ mov ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ add r1, r0, #PAGE_SZ
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_inv_range(start, end)
+ *
+ * Invalidate (discard) the specified virtual address range.
+ * May not write back any entries. If 'start' or 'end'
+ * are not cache line aligned, those lines must be written
+ * back.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(arm1026_dma_inv_range)
+ mov ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ tst r0, #CACHE_DLINESIZE - 1
+ bic r0, r0, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
+ tst r1, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
+1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_clean_range(start, end)
+ *
+ * Clean the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(arm1026_dma_clean_range)
+ mov ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_flush_range(start, end)
+ *
+ * Clean and invalidate the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm1026_dma_flush_range)
+ mov ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+ENTRY(arm1026_cache_fns)
+ .long arm1026_flush_kern_cache_all
+ .long arm1026_flush_user_cache_all
+ .long arm1026_flush_user_cache_range
+ .long arm1026_coherent_kern_range
+ .long arm1026_coherent_user_range
+ .long arm1026_flush_kern_dcache_page
+ .long arm1026_dma_inv_range
+ .long arm1026_dma_clean_range
+ .long arm1026_dma_flush_range
+
+ .align 5
+ENTRY(cpu_arm1026_dcache_clean_area)
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mov ip, #0
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ subs r1, r1, #CACHE_DLINESIZE
+ bhi 1b
+#endif
+ mov pc, lr
+
+/* =============================== PageTable ============================== */
+
+/*
+ * cpu_arm1026_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+ .align 5
+ENTRY(cpu_arm1026_switch_mm)
+ mov r1, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+1: mrc p15, 0, r15, c7, c14, 3 @ test, clean, invalidate
+ bne 1b
+#endif
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mcr p15, 0, r1, c7, c5, 0 @ invalidate I cache
+#endif
+ mcr p15, 0, r1, c7, c10, 4 @ drain WB
+ mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
+ mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
+ mov pc, lr
+
+/*
+ * cpu_arm1026_set_pte(ptep, pte)
+ *
+ * Set a PTE and flush it out
+ */
+ .align 5
+ENTRY(cpu_arm1026_set_pte)
+ str r1, [r0], #-2048 @ linux version
+
+ eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+
+ bic r2, r1, #PTE_SMALL_AP_MASK
+ bic r2, r2, #PTE_TYPE_MASK
+ orr r2, r2, #PTE_TYPE_SMALL
+
+ tst r1, #L_PTE_USER @ User?
+ orrne r2, r2, #PTE_SMALL_AP_URO_SRW
+
+ tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
+ orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
+
+ tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
+ movne r2, #0
+
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ eor r3, r1, #0x0a @ C & small page?
+ tst r3, #0x0b
+ biceq r2, r2, #4
+#endif
+ str r2, [r0] @ hardware version
+ mov r0, r0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+#endif
+ mov pc, lr
+
+
+ __INIT
+
+ .type __arm1026_setup, #function
+__arm1026_setup:
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
+ mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
+ mcr p15, 0, r4, c2, c0 @ load page table pointer
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mov r0, #4 @ explicitly disable writeback
+ mcr p15, 7, r0, c15, c0, 0
+#endif
+ mrc p15, 0, r0, c1, c0 @ get control register v4
+ ldr r5, arm1026_cr1_clear
+ bic r0, r0, r5
+ ldr r5, arm1026_cr1_set
+ orr r0, r0, r5
+#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
+ orr r0, r0, #0x4000 @ .R.. .... .... ....
+#endif
+ mov pc, lr
+ .size __arm1026_setup, . - __arm1026_setup
+
+ /*
+ * R
+ * .RVI ZFRS BLDP WCAM
+ * .011 1001 ..11 0101
+ *
+ */
+ .type arm1026_cr1_clear, #object
+ .type arm1026_cr1_set, #object
+arm1026_cr1_clear:
+ .word 0x7f3f
+arm1026_cr1_set:
+ .word 0x3935
+
+ __INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ * come through these
+ */
+ .type arm1026_processor_functions, #object
+arm1026_processor_functions:
+ .word v5t_early_abort
+ .word cpu_arm1026_proc_init
+ .word cpu_arm1026_proc_fin
+ .word cpu_arm1026_reset
+ .word cpu_arm1026_do_idle
+ .word cpu_arm1026_dcache_clean_area
+ .word cpu_arm1026_switch_mm
+ .word cpu_arm1026_set_pte
+ .size arm1026_processor_functions, . - arm1026_processor_functions
+
+ .section .rodata
+
+ .type cpu_arch_name, #object
+cpu_arch_name:
+ .asciz "armv5tej"
+ .size cpu_arch_name, . - cpu_arch_name
+
+ .type cpu_elf_name, #object
+cpu_elf_name:
+ .asciz "v5"
+ .size cpu_elf_name, . - cpu_elf_name
+ .align
+
+ .type cpu_arm1026_name, #object
+cpu_arm1026_name:
+ .ascii "ARM1026EJ-S"
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ .ascii "i"
+#endif
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ .ascii "d"
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ .ascii "(wt)"
+#else
+ .ascii "(wb)"
+#endif
+#endif
+#ifndef CONFIG_CPU_BPREDICT_DISABLE
+ .ascii "B"
+#endif
+#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
+ .ascii "RR"
+#endif
+ .ascii "\0"
+ .size cpu_arm1026_name, . - cpu_arm1026_name
+
+ .align
+
+ .section ".proc.info", #alloc, #execinstr
+
+ .type __arm1026_proc_info,#object
+__arm1026_proc_info:
+ .long 0x4106a260 @ ARM 1026EJ-S (v5TEJ)
+ .long 0xff0ffff0
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __arm1026_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA
+ .long cpu_arm1026_name
+ .long arm1026_processor_functions
+ .long v4wbi_tlb_fns
+ .long v4wb_user_fns
+ .long arm1026_cache_fns
+ .size __arm1026_proc_info, . - __arm1026_proc_info
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
new file mode 100644
index 0000000..0ee214b
--- /dev/null
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -0,0 +1,404 @@
+/*
+ * linux/arch/arm/mm/proc-arm6,7.S
+ *
+ * Copyright (C) 1997-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * These are the low level assembler for performing cache and TLB
+ * functions on the ARM610 & ARM710.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/constants.h>
+#include <asm/pgtable.h>
+#include <asm/procinfo.h>
+#include <asm/ptrace.h>
+
+ENTRY(cpu_arm6_dcache_clean_area)
+ENTRY(cpu_arm7_dcache_clean_area)
+ mov pc, lr
+
+/*
+ * Function: arm6_7_data_abort ()
+ *
+ * Params : r2 = address of aborted instruction
+ * : sp = pointer to registers
+ *
+ * Purpose : obtain information about current aborted instruction
+ *
+ * Returns : r0 = address of abort
+ * : r1 = FSR
+ */
+
+ENTRY(cpu_arm7_data_abort)
+ mrc p15, 0, r1, c5, c0, 0 @ get FSR
+ mrc p15, 0, r0, c6, c0, 0 @ get FAR
+ ldr r8, [r0] @ read arm instruction
+ tst r8, #1 << 20 @ L = 1 -> write?
+ orreq r1, r1, #1 << 8 @ yes.
+ and r7, r8, #15 << 24
+ add pc, pc, r7, lsr #22 @ Now branch to the relevant processing routine
+ nop
+
+/* 0 */ b .data_unknown
+/* 1 */ mov pc, lr @ swp
+/* 2 */ b .data_unknown
+/* 3 */ b .data_unknown
+/* 4 */ b .data_arm_lateldrpostconst @ ldr rd, [rn], #m
+/* 5 */ b .data_arm_lateldrpreconst @ ldr rd, [rn, #m]
+/* 6 */ b .data_arm_lateldrpostreg @ ldr rd, [rn], rm
+/* 7 */ b .data_arm_lateldrprereg @ ldr rd, [rn, rm]
+/* 8 */ b .data_arm_ldmstm @ ldm*a rn, <rlist>
+/* 9 */ b .data_arm_ldmstm @ ldm*b rn, <rlist>
+/* a */ b .data_unknown
+/* b */ b .data_unknown
+/* c */ mov pc, lr @ ldc rd, [rn], #m @ Same as ldr rd, [rn], #m
+/* d */ mov pc, lr @ ldc rd, [rn, #m]
+/* e */ b .data_unknown
+/* f */
+.data_unknown: @ Part of jumptable
+ mov r0, r2
+ mov r1, r8
+ mov r2, sp
+ bl baddataabort
+ b ret_from_exception
+
+ENTRY(cpu_arm6_data_abort)
+ mrc p15, 0, r1, c5, c0, 0 @ get FSR
+ mrc p15, 0, r0, c6, c0, 0 @ get FAR
+ ldr r8, [r2] @ read arm instruction
+ tst r8, #1 << 20 @ L = 1 -> write?
+ orreq r1, r1, #1 << 8 @ yes.
+ and r7, r8, #14 << 24
+ teq r7, #8 << 24 @ was it ldm/stm
+ movne pc, lr
+
+.data_arm_ldmstm:
+ tst r8, #1 << 21 @ check writeback bit
+ moveq pc, lr @ no writeback -> no fixup
+ mov r7, #0x11
+ orr r7, r7, #0x1100
+ and r6, r8, r7
+ and r2, r8, r7, lsl #1
+ add r6, r6, r2, lsr #1
+ and r2, r8, r7, lsl #2
+ add r6, r6, r2, lsr #2
+ and r2, r8, r7, lsl #3
+ add r6, r6, r2, lsr #3
+ add r6, r6, r6, lsr #8
+ add r6, r6, r6, lsr #4
+ and r6, r6, #15 @ r6 = no. of registers to transfer.
+ and r5, r8, #15 << 16 @ Extract 'n' from instruction
+ ldr r7, [sp, r5, lsr #14] @ Get register 'Rn'
+ tst r8, #1 << 23 @ Check U bit
+ subne r7, r7, r6, lsl #2 @ Undo increment
+ addeq r7, r7, r6, lsl #2 @ Undo decrement
+ str r7, [sp, r5, lsr #14] @ Put register 'Rn'
+ mov pc, lr
+
+.data_arm_apply_r6_and_rn:
+ and r5, r8, #15 << 16 @ Extract 'n' from instruction
+ ldr r7, [sp, r5, lsr #14] @ Get register 'Rn'
+ tst r8, #1 << 23 @ Check U bit
+ subne r7, r7, r6 @ Undo incrmenet
+ addeq r7, r7, r6 @ Undo decrement
+ str r7, [sp, r5, lsr #14] @ Put register 'Rn'
+ mov pc, lr
+
+.data_arm_lateldrpreconst:
+ tst r8, #1 << 21 @ check writeback bit
+ moveq pc, lr @ no writeback -> no fixup
+.data_arm_lateldrpostconst:
+ movs r2, r8, lsl #20 @ Get offset
+ moveq pc, lr @ zero -> no fixup
+ and r5, r8, #15 << 16 @ Extract 'n' from instruction
+ ldr r7, [sp, r5, lsr #14] @ Get register 'Rn'
+ tst r8, #1 << 23 @ Check U bit
+ subne r7, r7, r2, lsr #20 @ Undo increment
+ addeq r7, r7, r2, lsr #20 @ Undo decrement
+ str r7, [sp, r5, lsr #14] @ Put register 'Rn'
+ mov pc, lr
+
+.data_arm_lateldrprereg:
+ tst r8, #1 << 21 @ check writeback bit
+ moveq pc, lr @ no writeback -> no fixup
+.data_arm_lateldrpostreg:
+ and r7, r8, #15 @ Extract 'm' from instruction
+ ldr r6, [sp, r7, lsl #2] @ Get register 'Rm'
+ mov r5, r8, lsr #7 @ get shift count
+ ands r5, r5, #31
+ and r7, r8, #0x70 @ get shift type
+ orreq r7, r7, #8 @ shift count = 0
+ add pc, pc, r7
+ nop
+
+ mov r6, r6, lsl r5 @ 0: LSL #!0
+ b .data_arm_apply_r6_and_rn
+ b .data_arm_apply_r6_and_rn @ 1: LSL #0
+ nop
+ b .data_unknown @ 2: MUL?
+ nop
+ b .data_unknown @ 3: MUL?
+ nop
+ mov r6, r6, lsr r5 @ 4: LSR #!0
+ b .data_arm_apply_r6_and_rn
+ mov r6, r6, lsr #32 @ 5: LSR #32
+ b .data_arm_apply_r6_and_rn
+ b .data_unknown @ 6: MUL?
+ nop
+ b .data_unknown @ 7: MUL?
+ nop
+ mov r6, r6, asr r5 @ 8: ASR #!0
+ b .data_arm_apply_r6_and_rn
+ mov r6, r6, asr #32 @ 9: ASR #32
+ b .data_arm_apply_r6_and_rn
+ b .data_unknown @ A: MUL?
+ nop
+ b .data_unknown @ B: MUL?
+ nop
+ mov r6, r6, ror r5 @ C: ROR #!0
+ b .data_arm_apply_r6_and_rn
+ mov r6, r6, rrx @ D: RRX
+ b .data_arm_apply_r6_and_rn
+ b .data_unknown @ E: MUL?
+ nop
+ b .data_unknown @ F: MUL?
+
+/*
+ * Function: arm6_7_proc_init (void)
+ * : arm6_7_proc_fin (void)
+ *
+ * Notes : This processor does not require these
+ */
+ENTRY(cpu_arm6_proc_init)
+ENTRY(cpu_arm7_proc_init)
+ mov pc, lr
+
+ENTRY(cpu_arm6_proc_fin)
+ENTRY(cpu_arm7_proc_fin)
+ mov r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+ msr cpsr_c, r0
+ mov r0, #0x31 @ ....S..DP...M
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ mov pc, lr
+
+ENTRY(cpu_arm6_do_idle)
+ENTRY(cpu_arm7_do_idle)
+ mov pc, lr
+
+/*
+ * Function: arm6_7_switch_mm(unsigned long pgd_phys)
+ * Params : pgd_phys Physical address of page table
+ * Purpose : Perform a task switch, saving the old processes state, and restoring
+ * the new.
+ */
+ENTRY(cpu_arm6_switch_mm)
+ENTRY(cpu_arm7_switch_mm)
+ mov r1, #0
+ mcr p15, 0, r1, c7, c0, 0 @ flush cache
+ mcr p15, 0, r0, c2, c0, 0 @ update page table ptr
+ mcr p15, 0, r1, c5, c0, 0 @ flush TLBs
+ mov pc, lr
+
+/*
+ * Function: arm6_7_set_pte(pte_t *ptep, pte_t pte)
+ * Params : r0 = Address to set
+ * : r1 = value to set
+ * Purpose : Set a PTE and flush it out of any WB cache
+ */
+ .align 5
+ENTRY(cpu_arm6_set_pte)
+ENTRY(cpu_arm7_set_pte)
+ str r1, [r0], #-2048 @ linux version
+
+ eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+
+ bic r2, r1, #PTE_SMALL_AP_MASK
+ bic r2, r2, #PTE_TYPE_MASK
+ orr r2, r2, #PTE_TYPE_SMALL
+
+ tst r1, #L_PTE_USER @ User?
+ orrne r2, r2, #PTE_SMALL_AP_URO_SRW
+
+ tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
+ orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
+
+ tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young
+ movne r2, #0
+
+ str r2, [r0] @ hardware version
+ mov pc, lr
+
+/*
+ * Function: _arm6_7_reset
+ * Params : r0 = address to jump to
+ * Notes : This sets up everything for a reset
+ */
+ENTRY(cpu_arm6_reset)
+ENTRY(cpu_arm7_reset)
+ mov r1, #0
+ mcr p15, 0, r1, c7, c0, 0 @ flush cache
+ mcr p15, 0, r1, c5, c0, 0 @ flush TLB
+ mov r1, #0x30
+ mcr p15, 0, r1, c1, c0, 0 @ turn off MMU etc
+ mov pc, r0
+
+ __INIT
+
+ .type __arm6_setup, #function
+__arm6_setup: mov r0, #0
+ mcr p15, 0, r0, c7, c0 @ flush caches on v3
+ mcr p15, 0, r0, c5, c0 @ flush TLBs on v3
+ mov r0, #0x3d @ . ..RS BLDP WCAM
+ orr r0, r0, #0x100 @ . ..01 0011 1101
+ mov pc, lr
+ .size __arm6_setup, . - __arm6_setup
+
+ .type __arm7_setup, #function
+__arm7_setup: mov r0, #0
+ mcr p15, 0, r0, c7, c0 @ flush caches on v3
+ mcr p15, 0, r0, c5, c0 @ flush TLBs on v3
+ mcr p15, 0, r0, c3, c0 @ load domain access register
+ mov r0, #0x7d @ . ..RS BLDP WCAM
+ orr r0, r0, #0x100 @ . ..01 0111 1101
+ mov pc, lr
+ .size __arm7_setup, . - __arm7_setup
+
+ __INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ * come through these
+ */
+ .type arm6_processor_functions, #object
+ENTRY(arm6_processor_functions)
+ .word cpu_arm6_data_abort
+ .word cpu_arm6_proc_init
+ .word cpu_arm6_proc_fin
+ .word cpu_arm6_reset
+ .word cpu_arm6_do_idle
+ .word cpu_arm6_dcache_clean_area
+ .word cpu_arm6_switch_mm
+ .word cpu_arm6_set_pte
+ .size arm6_processor_functions, . - arm6_processor_functions
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ * come through these
+ */
+ .type arm7_processor_functions, #object
+ENTRY(arm7_processor_functions)
+ .word cpu_arm7_data_abort
+ .word cpu_arm7_proc_init
+ .word cpu_arm7_proc_fin
+ .word cpu_arm7_reset
+ .word cpu_arm7_do_idle
+ .word cpu_arm7_dcache_clean_area
+ .word cpu_arm7_switch_mm
+ .word cpu_arm7_set_pte
+ .size arm7_processor_functions, . - arm7_processor_functions
+
+ .section ".rodata"
+
+ .type cpu_arch_name, #object
+cpu_arch_name: .asciz "armv3"
+ .size cpu_arch_name, . - cpu_arch_name
+
+ .type cpu_elf_name, #object
+cpu_elf_name: .asciz "v3"
+ .size cpu_elf_name, . - cpu_elf_name
+
+ .type cpu_arm6_name, #object
+cpu_arm6_name: .asciz "ARM6"
+ .size cpu_arm6_name, . - cpu_arm6_name
+
+ .type cpu_arm610_name, #object
+cpu_arm610_name:
+ .asciz "ARM610"
+ .size cpu_arm610_name, . - cpu_arm610_name
+
+ .type cpu_arm7_name, #object
+cpu_arm7_name: .asciz "ARM7"
+ .size cpu_arm7_name, . - cpu_arm7_name
+
+ .type cpu_arm710_name, #object
+cpu_arm710_name:
+ .asciz "ARM710"
+ .size cpu_arm710_name, . - cpu_arm710_name
+
+ .align
+
+ .section ".proc.info", #alloc, #execinstr
+
+ .type __arm6_proc_info, #object
+__arm6_proc_info:
+ .long 0x41560600
+ .long 0xfffffff0
+ .long 0x00000c1e
+ b __arm6_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_26BIT
+ .long cpu_arm6_name
+ .long arm6_processor_functions
+ .long v3_tlb_fns
+ .long v3_user_fns
+ .long v3_cache_fns
+ .size __arm6_proc_info, . - __arm6_proc_info
+
+ .type __arm610_proc_info, #object
+__arm610_proc_info:
+ .long 0x41560610
+ .long 0xfffffff0
+ .long 0x00000c1e
+ b __arm6_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_26BIT
+ .long cpu_arm610_name
+ .long arm6_processor_functions
+ .long v3_tlb_fns
+ .long v3_user_fns
+ .long v3_cache_fns
+ .size __arm610_proc_info, . - __arm610_proc_info
+
+ .type __arm7_proc_info, #object
+__arm7_proc_info:
+ .long 0x41007000
+ .long 0xffffff00
+ .long 0x00000c1e
+ b __arm7_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_26BIT
+ .long cpu_arm7_name
+ .long arm7_processor_functions
+ .long v3_tlb_fns
+ .long v3_user_fns
+ .long v3_cache_fns
+ .size __arm7_proc_info, . - __arm7_proc_info
+
+ .type __arm710_proc_info, #object
+__arm710_proc_info:
+ .long 0x41007100
+ .long 0xfff8ff00
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __arm7_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_26BIT
+ .long cpu_arm710_name
+ .long arm7_processor_functions
+ .long v3_tlb_fns
+ .long v3_user_fns
+ .long v3_cache_fns
+ .size __arm710_proc_info, . - __arm710_proc_info
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
new file mode 100644
index 0000000..57cfa6a
--- /dev/null
+++ b/arch/arm/mm/proc-arm720.S
@@ -0,0 +1,267 @@
+/*
+ * linux/arch/arm/mm/proc-arm720.S: MMU functions for ARM720
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ * Rob Scott (rscott@mtrob.fdns.net)
+ * Copyright (C) 2000 ARM Limited, Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * These are the low level assembler for performing cache and TLB
+ * functions on the ARM720T. The ARM720T has a writethrough IDC
+ * cache, so we don't need to clean it.
+ *
+ * Changelog:
+ * 05-09-2000 SJH Created by moving 720 specific functions
+ * out of 'proc-arm6,7.S' per RMK discussion
+ * 07-25-2000 SJH Added idle function.
+ * 08-25-2000 DBS Updated for integration of ARM Ltd version.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/constants.h>
+#include <asm/pgtable.h>
+#include <asm/procinfo.h>
+#include <asm/ptrace.h>
+#include <asm/hardware.h>
+
+/*
+ * Function: arm720_proc_init (void)
+ * : arm720_proc_fin (void)
+ *
+ * Notes : This processor does not require these
+ */
+ENTRY(cpu_arm720_dcache_clean_area)
+ENTRY(cpu_arm720_proc_init)
+ mov pc, lr
+
+ENTRY(cpu_arm720_proc_fin)
+ stmfd sp!, {lr}
+ mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+ msr cpsr_c, ip
+ mrc p15, 0, r0, c1, c0, 0
+ bic r0, r0, #0x1000 @ ...i............
+ bic r0, r0, #0x000e @ ............wca.
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ mcr p15, 0, r1, c7, c7, 0 @ invalidate cache
+ ldmfd sp!, {pc}
+
+/*
+ * Function: arm720_proc_do_idle(void)
+ * Params : r0 = unused
+ * Purpose : put the processer in proper idle mode
+ */
+ENTRY(cpu_arm720_do_idle)
+ mov pc, lr
+
+/*
+ * Function: arm720_switch_mm(unsigned long pgd_phys)
+ * Params : pgd_phys Physical address of page table
+ * Purpose : Perform a task switch, saving the old process' state and restoring
+ * the new.
+ */
+ENTRY(cpu_arm720_switch_mm)
+ mov r1, #0
+ mcr p15, 0, r1, c7, c7, 0 @ invalidate cache
+ mcr p15, 0, r0, c2, c0, 0 @ update page table ptr
+ mcr p15, 0, r1, c8, c7, 0 @ flush TLB (v4)
+ mov pc, lr
+
+/*
+ * Function: arm720_set_pte(pte_t *ptep, pte_t pte)
+ * Params : r0 = Address to set
+ * : r1 = value to set
+ * Purpose : Set a PTE and flush it out of any WB cache
+ */
+ .align 5
+ENTRY(cpu_arm720_set_pte)
+ str r1, [r0], #-2048 @ linux version
+
+ eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+
+ bic r2, r1, #PTE_SMALL_AP_MASK
+ bic r2, r2, #PTE_TYPE_MASK
+ orr r2, r2, #PTE_TYPE_SMALL
+
+ tst r1, #L_PTE_USER @ User?
+ orrne r2, r2, #PTE_SMALL_AP_URO_SRW
+
+ tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
+ orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
+
+ tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young
+ movne r2, #0
+
+ str r2, [r0] @ hardware version
+ mov pc, lr
+
+/*
+ * Function: arm720_reset
+ * Params : r0 = address to jump to
+ * Notes : This sets up everything for a reset
+ */
+ENTRY(cpu_arm720_reset)
+ mov ip, #0
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate cache
+ mcr p15, 0, ip, c8, c7, 0 @ flush TLB (v4)
+ mrc p15, 0, ip, c1, c0, 0 @ get ctrl register
+ bic ip, ip, #0x000f @ ............wcam
+ bic ip, ip, #0x2100 @ ..v....s........
+ mcr p15, 0, ip, c1, c0, 0 @ ctrl register
+ mov pc, r0
+
+ __INIT
+
+ .type __arm710_setup, #function
+__arm710_setup:
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7, 0 @ invalidate caches
+ mcr p15, 0, r0, c8, c7, 0 @ flush TLB (v4)
+ mrc p15, 0, r0, c1, c0 @ get control register
+ ldr r5, arm710_cr1_clear
+ bic r0, r0, r5
+ ldr r5, arm710_cr1_set
+ orr r0, r0, r5
+ mov pc, lr @ __ret (head.S)
+ .size __arm710_setup, . - __arm710_setup
+
+ /*
+ * R
+ * .RVI ZFRS BLDP WCAM
+ * .... 0001 ..11 1101
+ *
+ */
+ .type arm710_cr1_clear, #object
+ .type arm710_cr1_set, #object
+arm710_cr1_clear:
+ .word 0x0f3f
+arm710_cr1_set:
+ .word 0x013d
+
+ .type __arm720_setup, #function
+__arm720_setup:
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7, 0 @ invalidate caches
+ mcr p15, 0, r0, c8, c7, 0 @ flush TLB (v4)
+ mrc p15, 0, r0, c1, c0 @ get control register
+ ldr r5, arm720_cr1_clear
+ bic r0, r0, r5
+ ldr r5, arm720_cr1_set
+ orr r0, r0, r5
+ mov pc, lr @ __ret (head.S)
+ .size __arm720_setup, . - __arm720_setup
+
+ /*
+ * R
+ * .RVI ZFRS BLDP WCAM
+ * ..1. 1001 ..11 1101
+ *
+ */
+ .type arm720_cr1_clear, #object
+ .type arm720_cr1_set, #object
+arm720_cr1_clear:
+ .word 0x2f3f
+arm720_cr1_set:
+ .word 0x213d
+
+ __INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ * come through these
+ */
+ .type arm720_processor_functions, #object
+ENTRY(arm720_processor_functions)
+ .word v4t_late_abort
+ .word cpu_arm720_proc_init
+ .word cpu_arm720_proc_fin
+ .word cpu_arm720_reset
+ .word cpu_arm720_do_idle
+ .word cpu_arm720_dcache_clean_area
+ .word cpu_arm720_switch_mm
+ .word cpu_arm720_set_pte
+ .size arm720_processor_functions, . - arm720_processor_functions
+
+ .section ".rodata"
+
+ .type cpu_arch_name, #object
+cpu_arch_name: .asciz "armv4t"
+ .size cpu_arch_name, . - cpu_arch_name
+
+ .type cpu_elf_name, #object
+cpu_elf_name: .asciz "v4"
+ .size cpu_elf_name, . - cpu_elf_name
+
+ .type cpu_arm710_name, #object
+cpu_arm710_name:
+ .asciz "ARM710T"
+ .size cpu_arm710_name, . - cpu_arm710_name
+
+ .type cpu_arm720_name, #object
+cpu_arm720_name:
+ .asciz "ARM720T"
+ .size cpu_arm720_name, . - cpu_arm720_name
+
+ .align
+
+/*
+ * See linux/include/asm-arm/procinfo.h for a definition of this structure.
+ */
+
+ .section ".proc.info", #alloc, #execinstr
+
+ .type __arm710_proc_info, #object
+__arm710_proc_info:
+ .long 0x41807100 @ cpu_val
+ .long 0xffffff00 @ cpu_mask
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __arm710_setup @ cpu_flush
+ .long cpu_arch_name @ arch_name
+ .long cpu_elf_name @ elf_name
+ .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB @ elf_hwcap
+ .long cpu_arm710_name @ name
+ .long arm720_processor_functions
+ .long v4_tlb_fns
+ .long v4wt_user_fns
+ .long v4_cache_fns
+ .size __arm710_proc_info, . - __arm710_proc_info
+
+ .type __arm720_proc_info, #object
+__arm720_proc_info:
+ .long 0x41807200 @ cpu_val
+ .long 0xffffff00 @ cpu_mask
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __arm720_setup @ cpu_flush
+ .long cpu_arch_name @ arch_name
+ .long cpu_elf_name @ elf_name
+ .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB @ elf_hwcap
+ .long cpu_arm720_name @ name
+ .long arm720_processor_functions
+ .long v4_tlb_fns
+ .long v4wt_user_fns
+ .long v4_cache_fns
+ .size __arm720_proc_info, . - __arm720_proc_info
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
new file mode 100644
index 0000000..0f490a0
--- /dev/null
+++ b/arch/arm/mm/proc-arm920.S
@@ -0,0 +1,480 @@
+/*
+ * linux/arch/arm/mm/proc-arm920.S: MMU functions for ARM920
+ *
+ * Copyright (C) 1999,2000 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * These are the low level assembler for performing cache and TLB
+ * functions on the arm920.
+ *
+ * CONFIG_CPU_ARM920_CPU_IDLE -> nohlt
+ */
+#include <linux/linkage.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/pgtable.h>
+#include <asm/procinfo.h>
+#include <asm/hardware.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include "proc-macros.S"
+
+/*
+ * The size of one data cache line.
+ */
+#define CACHE_DLINESIZE 32
+
+/*
+ * The number of data cache segments.
+ */
+#define CACHE_DSEGMENTS 8
+
+/*
+ * The number of lines in a cache segment.
+ */
+#define CACHE_DENTRIES 64
+
+/*
+ * This is the size at which it becomes more efficient to
+ * clean the whole cache, rather than using the individual
+ * cache line maintainence instructions.
+ */
+#define CACHE_DLIMIT 65536
+
+
+ .text
+/*
+ * cpu_arm920_proc_init()
+ */
+ENTRY(cpu_arm920_proc_init)
+ mov pc, lr
+
+/*
+ * cpu_arm920_proc_fin()
+ */
+ENTRY(cpu_arm920_proc_fin)
+ stmfd sp!, {lr}
+ mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+ msr cpsr_c, ip
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+ bl arm920_flush_kern_cache_all
+#else
+ bl v4wt_flush_kern_cache_all
+#endif
+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
+ bic r0, r0, #0x1000 @ ...i............
+ bic r0, r0, #0x000e @ ............wca.
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ ldmfd sp!, {pc}
+
+/*
+ * cpu_arm920_reset(loc)
+ *
+ * Perform a soft reset of the system. Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ */
+ .align 5
+ENTRY(cpu_arm920_reset)
+ mov ip, #0
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mrc p15, 0, ip, c1, c0, 0 @ ctrl register
+ bic ip, ip, #0x000f @ ............wcam
+ bic ip, ip, #0x1100 @ ...i...s........
+ mcr p15, 0, ip, c1, c0, 0 @ ctrl register
+ mov pc, r0
+
+/*
+ * cpu_arm920_do_idle()
+ */
+ .align 5
+ENTRY(cpu_arm920_do_idle)
+ mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
+ mov pc, lr
+
+
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+
+/*
+ * flush_user_cache_all()
+ *
+ * Invalidate all cache entries in a particular address
+ * space.
+ */
+ENTRY(arm920_flush_user_cache_all)
+ /* FALLTHROUGH */
+
+/*
+ * flush_kern_cache_all()
+ *
+ * Clean and invalidate the entire cache.
+ */
+ENTRY(arm920_flush_kern_cache_all)
+ mov r2, #VM_EXEC
+ mov ip, #0
+__flush_whole_cache:
+ mov r1, #(CACHE_DSEGMENTS - 1) << 5 @ 8 segments
+1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
+2: mcr p15, 0, r3, c7, c14, 2 @ clean+invalidate D index
+ subs r3, r3, #1 << 26
+ bcs 2b @ entries 63 to 0
+ subs r1, r1, #1 << 5
+ bcs 1b @ segments 7 to 0
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * flush_user_cache_range(start, end, flags)
+ *
+ * Invalidate a range of cache entries in the specified
+ * address space.
+ *
+ * - start - start address (inclusive)
+ * - end - end address (exclusive)
+ * - flags - vm_flags for address space
+ */
+ENTRY(arm920_flush_user_cache_range)
+ mov ip, #0
+ sub r3, r1, r0 @ calculate total size
+ cmp r3, #CACHE_DLIMIT
+ bhs __flush_whole_cache
+
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ tst r2, #VM_EXEC
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * coherent_kern_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start, end. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm920_coherent_kern_range)
+ /* FALLTHROUGH */
+
+/*
+ * coherent_user_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start, end. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm920_coherent_user_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * flush_kern_dcache_page(void *page)
+ *
+ * Ensure no D cache aliasing occurs, either with itself or
+ * the I cache
+ *
+ * - addr - page aligned address
+ */
+ENTRY(arm920_flush_kern_dcache_page)
+ add r1, r0, #PAGE_SZ
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_inv_range(start, end)
+ *
+ * Invalidate (discard) the specified virtual address range.
+ * May not write back any entries. If 'start' or 'end'
+ * are not cache line aligned, those lines must be written
+ * back.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(arm920_dma_inv_range)
+ tst r0, #CACHE_DLINESIZE - 1
+ bic r0, r0, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
+ tst r1, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
+1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_clean_range(start, end)
+ *
+ * Clean the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(arm920_dma_clean_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_flush_range(start, end)
+ *
+ * Clean and invalidate the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm920_dma_flush_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+ENTRY(arm920_cache_fns)
+ .long arm920_flush_kern_cache_all
+ .long arm920_flush_user_cache_all
+ .long arm920_flush_user_cache_range
+ .long arm920_coherent_kern_range
+ .long arm920_coherent_user_range
+ .long arm920_flush_kern_dcache_page
+ .long arm920_dma_inv_range
+ .long arm920_dma_clean_range
+ .long arm920_dma_flush_range
+
+#endif
+
+
+ENTRY(cpu_arm920_dcache_clean_area)
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ subs r1, r1, #CACHE_DLINESIZE
+ bhi 1b
+ mov pc, lr
+
+/* =============================== PageTable ============================== */
+
+/*
+ * cpu_arm920_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+ .align 5
+ENTRY(cpu_arm920_switch_mm)
+ mov ip, #0
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
+#else
+@ && 'Clean & Invalidate whole DCache'
+@ && Re-written to use Index Ops.
+@ && Uses registers r1, r3 and ip
+
+ mov r1, #(CACHE_DSEGMENTS - 1) << 5 @ 8 segments
+1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
+2: mcr p15, 0, r3, c7, c14, 2 @ clean & invalidate D index
+ subs r3, r3, #1 << 26
+ bcs 2b @ entries 63 to 0
+ subs r1, r1, #1 << 5
+ bcs 1b @ segments 7 to 0
+#endif
+ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mov pc, lr
+
+/*
+ * cpu_arm920_set_pte(ptep, pte)
+ *
+ * Set a PTE and flush it out
+ */
+ .align 5
+ENTRY(cpu_arm920_set_pte)
+ str r1, [r0], #-2048 @ linux version
+
+ eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+
+ bic r2, r1, #PTE_SMALL_AP_MASK
+ bic r2, r2, #PTE_TYPE_MASK
+ orr r2, r2, #PTE_TYPE_SMALL
+
+ tst r1, #L_PTE_USER @ User?
+ orrne r2, r2, #PTE_SMALL_AP_URO_SRW
+
+ tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
+ orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
+
+ tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
+ movne r2, #0
+
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ eor r3, r2, #0x0a @ C & small page?
+ tst r3, #0x0b
+ biceq r2, r2, #4
+#endif
+ str r2, [r0] @ hardware version
+ mov r0, r0
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+ __INIT
+
+ .type __arm920_setup, #function
+__arm920_setup:
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
+ mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
+ mrc p15, 0, r0, c1, c0 @ get control register v4
+ ldr r5, arm920_cr1_clear
+ bic r0, r0, r5
+ ldr r5, arm920_cr1_set
+ orr r0, r0, r5
+ mov pc, lr
+ .size __arm920_setup, . - __arm920_setup
+
+ /*
+ * R
+ * .RVI ZFRS BLDP WCAM
+ * ..11 0001 ..11 0101
+ *
+ */
+ .type arm920_cr1_clear, #object
+ .type arm920_cr1_set, #object
+arm920_cr1_clear:
+ .word 0x3f3f
+arm920_cr1_set:
+ .word 0x3135
+
+ __INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ * come through these
+ */
+ .type arm920_processor_functions, #object
+arm920_processor_functions:
+ .word v4t_early_abort
+ .word cpu_arm920_proc_init
+ .word cpu_arm920_proc_fin
+ .word cpu_arm920_reset
+ .word cpu_arm920_do_idle
+ .word cpu_arm920_dcache_clean_area
+ .word cpu_arm920_switch_mm
+ .word cpu_arm920_set_pte
+ .size arm920_processor_functions, . - arm920_processor_functions
+
+ .section ".rodata"
+
+ .type cpu_arch_name, #object
+cpu_arch_name:
+ .asciz "armv4t"
+ .size cpu_arch_name, . - cpu_arch_name
+
+ .type cpu_elf_name, #object
+cpu_elf_name:
+ .asciz "v4"
+ .size cpu_elf_name, . - cpu_elf_name
+
+ .type cpu_arm920_name, #object
+cpu_arm920_name:
+ .ascii "ARM920T"
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ .ascii "i"
+#endif
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ .ascii "d"
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ .ascii "(wt)"
+#else
+ .ascii "(wb)"
+#endif
+#endif
+ .ascii "\0"
+ .size cpu_arm920_name, . - cpu_arm920_name
+
+ .align
+
+ .section ".proc.info", #alloc, #execinstr
+
+ .type __arm920_proc_info,#object
+__arm920_proc_info:
+ .long 0x41009200
+ .long 0xff00fff0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __arm920_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB
+ .long cpu_arm920_name
+ .long arm920_processor_functions
+ .long v4wbi_tlb_fns
+ .long v4wb_user_fns
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+ .long arm920_cache_fns
+#else
+ .long v4wt_cache_fns
+#endif
+ .size __arm920_proc_info, . - __arm920_proc_info
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
new file mode 100644
index 0000000..62bc34a
--- /dev/null
+++ b/arch/arm/mm/proc-arm922.S
@@ -0,0 +1,484 @@
+/*
+ * linux/arch/arm/mm/proc-arm922.S: MMU functions for ARM922
+ *
+ * Copyright (C) 1999,2000 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ * Copyright (C) 2001 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * These are the low level assembler for performing cache and TLB
+ * functions on the arm922.
+ *
+ * CONFIG_CPU_ARM922_CPU_IDLE -> nohlt
+ */
+#include <linux/linkage.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/pgtable.h>
+#include <asm/procinfo.h>
+#include <asm/hardware.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include "proc-macros.S"
+
+/*
+ * The size of one data cache line.
+ */
+#define CACHE_DLINESIZE 32
+
+/*
+ * The number of data cache segments.
+ */
+#define CACHE_DSEGMENTS 4
+
+/*
+ * The number of lines in a cache segment.
+ */
+#define CACHE_DENTRIES 64
+
+/*
+ * This is the size at which it becomes more efficient to
+ * clean the whole cache, rather than using the individual
+ * cache line maintainence instructions. (I think this should
+ * be 32768).
+ */
+#define CACHE_DLIMIT 8192
+
+
+ .text
+/*
+ * cpu_arm922_proc_init()
+ */
+ENTRY(cpu_arm922_proc_init)
+ mov pc, lr
+
+/*
+ * cpu_arm922_proc_fin()
+ */
+ENTRY(cpu_arm922_proc_fin)
+ stmfd sp!, {lr}
+ mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+ msr cpsr_c, ip
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+ bl arm922_flush_kern_cache_all
+#else
+ bl v4wt_flush_kern_cache_all
+#endif
+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
+ bic r0, r0, #0x1000 @ ...i............
+ bic r0, r0, #0x000e @ ............wca.
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ ldmfd sp!, {pc}
+
+/*
+ * cpu_arm922_reset(loc)
+ *
+ * Perform a soft reset of the system. Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ */
+ .align 5
+ENTRY(cpu_arm922_reset)
+ mov ip, #0
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mrc p15, 0, ip, c1, c0, 0 @ ctrl register
+ bic ip, ip, #0x000f @ ............wcam
+ bic ip, ip, #0x1100 @ ...i...s........
+ mcr p15, 0, ip, c1, c0, 0 @ ctrl register
+ mov pc, r0
+
+/*
+ * cpu_arm922_do_idle()
+ */
+ .align 5
+ENTRY(cpu_arm922_do_idle)
+ mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
+ mov pc, lr
+
+
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+
+/*
+ * flush_user_cache_all()
+ *
+ * Clean and invalidate all cache entries in a particular
+ * address space.
+ */
+ENTRY(arm922_flush_user_cache_all)
+ /* FALLTHROUGH */
+
+/*
+ * flush_kern_cache_all()
+ *
+ * Clean and invalidate the entire cache.
+ */
+ENTRY(arm922_flush_kern_cache_all)
+ mov r2, #VM_EXEC
+ mov ip, #0
+__flush_whole_cache:
+ mov r1, #(CACHE_DSEGMENTS - 1) << 5 @ 8 segments
+1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
+2: mcr p15, 0, r3, c7, c14, 2 @ clean+invalidate D index
+ subs r3, r3, #1 << 26
+ bcs 2b @ entries 63 to 0
+ subs r1, r1, #1 << 5
+ bcs 1b @ segments 7 to 0
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * flush_user_cache_range(start, end, flags)
+ *
+ * Clean and invalidate a range of cache entries in the
+ * specified address range.
+ *
+ * - start - start address (inclusive)
+ * - end - end address (exclusive)
+ * - flags - vm_flags describing address space
+ */
+ENTRY(arm922_flush_user_cache_range)
+ mov ip, #0
+ sub r3, r1, r0 @ calculate total size
+ cmp r3, #CACHE_DLIMIT
+ bhs __flush_whole_cache
+
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ tst r2, #VM_EXEC
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * coherent_kern_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start, end. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm922_coherent_kern_range)
+ /* FALLTHROUGH */
+
+/*
+ * coherent_user_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start, end. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm922_coherent_user_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * flush_kern_dcache_page(void *page)
+ *
+ * Ensure no D cache aliasing occurs, either with itself or
+ * the I cache
+ *
+ * - addr - page aligned address
+ */
+ENTRY(arm922_flush_kern_dcache_page)
+ add r1, r0, #PAGE_SZ
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_inv_range(start, end)
+ *
+ * Invalidate (discard) the specified virtual address range.
+ * May not write back any entries. If 'start' or 'end'
+ * are not cache line aligned, those lines must be written
+ * back.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(arm922_dma_inv_range)
+ tst r0, #CACHE_DLINESIZE - 1
+ bic r0, r0, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
+ tst r1, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
+1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_clean_range(start, end)
+ *
+ * Clean the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(arm922_dma_clean_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_flush_range(start, end)
+ *
+ * Clean and invalidate the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm922_dma_flush_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+ENTRY(arm922_cache_fns)
+ .long arm922_flush_kern_cache_all
+ .long arm922_flush_user_cache_all
+ .long arm922_flush_user_cache_range
+ .long arm922_coherent_kern_range
+ .long arm922_coherent_user_range
+ .long arm922_flush_kern_dcache_page
+ .long arm922_dma_inv_range
+ .long arm922_dma_clean_range
+ .long arm922_dma_flush_range
+
+#endif
+
+
+ENTRY(cpu_arm922_dcache_clean_area)
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ subs r1, r1, #CACHE_DLINESIZE
+ bhi 1b
+#endif
+ mov pc, lr
+
+/* =============================== PageTable ============================== */
+
+/*
+ * cpu_arm922_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+ .align 5
+ENTRY(cpu_arm922_switch_mm)
+ mov ip, #0
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
+#else
+@ && 'Clean & Invalidate whole DCache'
+@ && Re-written to use Index Ops.
+@ && Uses registers r1, r3 and ip
+
+ mov r1, #(CACHE_DSEGMENTS - 1) << 5 @ 4 segments
+1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
+2: mcr p15, 0, r3, c7, c14, 2 @ clean & invalidate D index
+ subs r3, r3, #1 << 26
+ bcs 2b @ entries 63 to 0
+ subs r1, r1, #1 << 5
+ bcs 1b @ segments 7 to 0
+#endif
+ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mov pc, lr
+
+/*
+ * cpu_arm922_set_pte(ptep, pte)
+ *
+ * Set a PTE and flush it out
+ */
+ .align 5
+ENTRY(cpu_arm922_set_pte)
+ str r1, [r0], #-2048 @ linux version
+
+ eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+
+ bic r2, r1, #PTE_SMALL_AP_MASK
+ bic r2, r2, #PTE_TYPE_MASK
+ orr r2, r2, #PTE_TYPE_SMALL
+
+ tst r1, #L_PTE_USER @ User?
+ orrne r2, r2, #PTE_SMALL_AP_URO_SRW
+
+ tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
+ orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
+
+ tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
+ movne r2, #0
+
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ eor r3, r2, #0x0a @ C & small page?
+ tst r3, #0x0b
+ biceq r2, r2, #4
+#endif
+ str r2, [r0] @ hardware version
+ mov r0, r0
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+ __INIT
+
+ .type __arm922_setup, #function
+__arm922_setup:
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
+ mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
+ mrc p15, 0, r0, c1, c0 @ get control register v4
+ ldr r5, arm922_cr1_clear
+ bic r0, r0, r5
+ ldr r5, arm922_cr1_set
+ orr r0, r0, r5
+ mov pc, lr
+ .size __arm922_setup, . - __arm922_setup
+
+ /*
+ * R
+ * .RVI ZFRS BLDP WCAM
+ * ..11 0001 ..11 0101
+ *
+ */
+ .type arm922_cr1_clear, #object
+ .type arm922_cr1_set, #object
+arm922_cr1_clear:
+ .word 0x3f3f
+arm922_cr1_set:
+ .word 0x3135
+
+ __INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ * come through these
+ */
+ .type arm922_processor_functions, #object
+arm922_processor_functions:
+ .word v4t_early_abort
+ .word cpu_arm922_proc_init
+ .word cpu_arm922_proc_fin
+ .word cpu_arm922_reset
+ .word cpu_arm922_do_idle
+ .word cpu_arm922_dcache_clean_area
+ .word cpu_arm922_switch_mm
+ .word cpu_arm922_set_pte
+ .size arm922_processor_functions, . - arm922_processor_functions
+
+ .section ".rodata"
+
+ .type cpu_arch_name, #object
+cpu_arch_name:
+ .asciz "armv4t"
+ .size cpu_arch_name, . - cpu_arch_name
+
+ .type cpu_elf_name, #object
+cpu_elf_name:
+ .asciz "v4"
+ .size cpu_elf_name, . - cpu_elf_name
+
+ .type cpu_arm922_name, #object
+cpu_arm922_name:
+ .ascii "ARM922T"
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ .ascii "i"
+#endif
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ .ascii "d"
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ .ascii "(wt)"
+#else
+ .ascii "(wb)"
+#endif
+#endif
+ .ascii "\0"
+ .size cpu_arm922_name, . - cpu_arm922_name
+
+ .align
+
+ .section ".proc.info", #alloc, #execinstr
+
+ .type __arm922_proc_info,#object
+__arm922_proc_info:
+ .long 0x41009220
+ .long 0xff00fff0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __arm922_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB
+ .long cpu_arm922_name
+ .long arm922_processor_functions
+ .long v4wbi_tlb_fns
+ .long v4wb_user_fns
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+ .long arm922_cache_fns
+#else
+ .long v4wt_cache_fns
+#endif
+ .size __arm922_proc_info, . - __arm922_proc_info
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
new file mode 100644
index 0000000..ee49aa2
--- /dev/null
+++ b/arch/arm/mm/proc-arm925.S
@@ -0,0 +1,562 @@
+/*
+ * linux/arch/arm/mm/arm925.S: MMU functions for ARM925
+ *
+ * Copyright (C) 1999,2000 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ * Copyright (C) 2002 RidgeRun, Inc.
+ * Copyright (C) 2002-2003 MontaVista Software, Inc.
+ *
+ * Update for Linux-2.6 and cache flush improvements
+ * Copyright (C) 2004 Nokia Corporation by Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * These are the low level assembler for performing cache and TLB
+ * functions on the arm925.
+ *
+ * CONFIG_CPU_ARM925_CPU_IDLE -> nohlt
+ *
+ * Some additional notes based on deciphering the TI TRM on OMAP-5910:
+ *
+ * NOTE1: The TI925T Configuration Register bit "D-cache clean and flush
+ * entry mode" must be 0 to flush the entries in both segments
+ * at once. This is the default value. See TRM 2-20 and 2-24 for
+ * more information.
+ *
+ * NOTE2: Default is the "D-cache clean and flush entry mode". It looks
+ * like the "Transparent mode" must be on for partial cache flushes
+ * to work in this mode. This mode only works with 16-bit external
+ * memory. See TRM 2-24 for more information.
+ *
+ * NOTE3: Write-back cache flushing seems to be flakey with devices using
+ * direct memory access, such as USB OHCI. The workaround is to use
+ * write-through cache with CONFIG_CPU_DCACHE_WRITETHROUGH (this is
+ * the default for OMAP-1510).
+ */
+
+#include <linux/linkage.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/pgtable.h>
+#include <asm/procinfo.h>
+#include <asm/hardware.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include "proc-macros.S"
+
+/*
+ * The size of one data cache line.
+ */
+#define CACHE_DLINESIZE 16
+
+/*
+ * The number of data cache segments.
+ */
+#define CACHE_DSEGMENTS 2
+
+/*
+ * The number of lines in a cache segment.
+ */
+#define CACHE_DENTRIES 256
+
+/*
+ * This is the size at which it becomes more efficient to
+ * clean the whole cache, rather than using the individual
+ * cache line maintainence instructions.
+ */
+#define CACHE_DLIMIT 8192
+
+ .text
+/*
+ * cpu_arm925_proc_init()
+ */
+ENTRY(cpu_arm925_proc_init)
+ mov pc, lr
+
+/*
+ * cpu_arm925_proc_fin()
+ */
+ENTRY(cpu_arm925_proc_fin)
+ stmfd sp!, {lr}
+ mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+ msr cpsr_c, ip
+ bl arm925_flush_kern_cache_all
+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
+ bic r0, r0, #0x1000 @ ...i............
+ bic r0, r0, #0x000e @ ............wca.
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ ldmfd sp!, {pc}
+
+/*
+ * cpu_arm925_reset(loc)
+ *
+ * Perform a soft reset of the system. Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ */
+ .align 5
+ENTRY(cpu_arm925_reset)
+ /* Send software reset to MPU and DSP */
+ mov ip, #0xff000000
+ orr ip, ip, #0x00fe0000
+ orr ip, ip, #0x0000ce00
+ mov r4, #1
+ strh r4, [ip, #0x10]
+
+ mov ip, #0
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mrc p15, 0, ip, c1, c0, 0 @ ctrl register
+ bic ip, ip, #0x000f @ ............wcam
+ bic ip, ip, #0x1100 @ ...i...s........
+ mcr p15, 0, ip, c1, c0, 0 @ ctrl register
+ mov pc, r0
+
+/*
+ * cpu_arm925_do_idle()
+ *
+ * Called with IRQs disabled
+ */
+ .align 10
+ENTRY(cpu_arm925_do_idle)
+ mov r0, #0
+ mrc p15, 0, r1, c1, c0, 0 @ Read control register
+ mcr p15, 0, r0, c7, c10, 4 @ Drain write buffer
+ bic r2, r1, #1 << 12
+ mcr p15, 0, r2, c1, c0, 0 @ Disable I cache
+ mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
+ mcr p15, 0, r1, c1, c0, 0 @ Restore ICache enable
+ mov pc, lr
+
+/*
+ * flush_user_cache_all()
+ *
+ * Clean and invalidate all cache entries in a particular
+ * address space.
+ */
+ENTRY(arm925_flush_user_cache_all)
+ /* FALLTHROUGH */
+
+/*
+ * flush_kern_cache_all()
+ *
+ * Clean and invalidate the entire cache.
+ */
+ENTRY(arm925_flush_kern_cache_all)
+ mov r2, #VM_EXEC
+ mov ip, #0
+__flush_whole_cache:
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
+#else
+ /* Flush entries in both segments at once, see NOTE1 above */
+ mov r3, #(CACHE_DENTRIES - 1) << 4 @ 256 entries in segment
+2: mcr p15, 0, r3, c7, c14, 2 @ clean+invalidate D index
+ subs r3, r3, #1 << 4
+ bcs 2b @ entries 255 to 0
+#endif
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * flush_user_cache_range(start, end, flags)
+ *
+ * Clean and invalidate a range of cache entries in the
+ * specified address range.
+ *
+ * - start - start address (inclusive)
+ * - end - end address (exclusive)
+ * - flags - vm_flags describing address space
+ */
+ENTRY(arm925_flush_user_cache_range)
+ mov ip, #0
+ sub r3, r1, r0 @ calculate total size
+ cmp r3, #CACHE_DLIMIT
+ bgt __flush_whole_cache
+1: tst r2, #VM_EXEC
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+#else
+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+#endif
+ cmp r0, r1
+ blo 1b
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * coherent_kern_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start, end. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm925_coherent_kern_range)
+ /* FALLTHROUGH */
+
+/*
+ * coherent_user_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start, end. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm925_coherent_user_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * flush_kern_dcache_page(void *page)
+ *
+ * Ensure no D cache aliasing occurs, either with itself or
+ * the I cache
+ *
+ * - addr - page aligned address
+ */
+ENTRY(arm925_flush_kern_dcache_page)
+ add r1, r0, #PAGE_SZ
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_inv_range(start, end)
+ *
+ * Invalidate (discard) the specified virtual address range.
+ * May not write back any entries. If 'start' or 'end'
+ * are not cache line aligned, those lines must be written
+ * back.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(arm925_dma_inv_range)
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+ tst r0, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
+ tst r1, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
+#endif
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_clean_range(start, end)
+ *
+ * Clean the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(arm925_dma_clean_range)
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_flush_range(start, end)
+ *
+ * Clean and invalidate the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm925_dma_flush_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1:
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+#else
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+#endif
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+ENTRY(arm925_cache_fns)
+ .long arm925_flush_kern_cache_all
+ .long arm925_flush_user_cache_all
+ .long arm925_flush_user_cache_range
+ .long arm925_coherent_kern_range
+ .long arm925_coherent_user_range
+ .long arm925_flush_kern_dcache_page
+ .long arm925_dma_inv_range
+ .long arm925_dma_clean_range
+ .long arm925_dma_flush_range
+
+ENTRY(cpu_arm925_dcache_clean_area)
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ subs r1, r1, #CACHE_DLINESIZE
+ bhi 1b
+#endif
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/* =============================== PageTable ============================== */
+
+/*
+ * cpu_arm925_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+ .align 5
+ENTRY(cpu_arm925_switch_mm)
+ mov ip, #0
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
+#else
+ /* Flush entries in bothe segments at once, see NOTE1 above */
+ mov r3, #(CACHE_DENTRIES - 1) << 4 @ 256 entries in segment
+2: mcr p15, 0, r3, c7, c14, 2 @ clean & invalidate D index
+ subs r3, r3, #1 << 4
+ bcs 2b @ entries 255 to 0
+#endif
+ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mov pc, lr
+
+/*
+ * cpu_arm925_set_pte(ptep, pte)
+ *
+ * Set a PTE and flush it out
+ */
+ .align 5
+ENTRY(cpu_arm925_set_pte)
+ str r1, [r0], #-2048 @ linux version
+
+ eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+
+ bic r2, r1, #PTE_SMALL_AP_MASK
+ bic r2, r2, #PTE_TYPE_MASK
+ orr r2, r2, #PTE_TYPE_SMALL
+
+ tst r1, #L_PTE_USER @ User?
+ orrne r2, r2, #PTE_SMALL_AP_URO_SRW
+
+ tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
+ orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
+
+ tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
+ movne r2, #0
+
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ eor r3, r2, #0x0a @ C & small page?
+ tst r3, #0x0b
+ biceq r2, r2, #4
+#endif
+ str r2, [r0] @ hardware version
+ mov r0, r0
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+#endif
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+ __INIT
+
+ .type __arm925_setup, #function
+__arm925_setup:
+ mov r0, #0
+#if defined(CONFIG_CPU_ICACHE_STREAMING_DISABLE)
+ orr r0,r0,#1 << 7
+#endif
+
+ /* Transparent on, D-cache clean & flush mode. See NOTE2 above */
+ orr r0,r0,#1 << 1 @ transparent mode on
+ mcr p15, 0, r0, c15, c1, 0 @ write TI config register
+
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
+ mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
+
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mov r0, #4 @ disable write-back on caches explicitly
+ mcr p15, 7, r0, c15, c0, 0
+#endif
+
+ mrc p15, 0, r0, c1, c0 @ get control register v4
+ ldr r5, arm925_cr1_clear
+ bic r0, r0, r5
+ ldr r5, arm925_cr1_set
+ orr r0, r0, r5
+#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
+ orr r0, r0, #0x4000 @ .1.. .... .... ....
+#endif
+ mov pc, lr
+ .size __arm925_setup, . - __arm925_setup
+
+ /*
+ * R
+ * .RVI ZFRS BLDP WCAM
+ * .011 0001 ..11 1101
+ *
+ */
+ .type arm925_cr1_clear, #object
+ .type arm925_cr1_set, #object
+arm925_cr1_clear:
+ .word 0x7f3f
+arm925_cr1_set:
+ .word 0x313d
+
+ __INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ * come through these
+ */
+ .type arm925_processor_functions, #object
+arm925_processor_functions:
+ .word v4t_early_abort
+ .word cpu_arm925_proc_init
+ .word cpu_arm925_proc_fin
+ .word cpu_arm925_reset
+ .word cpu_arm925_do_idle
+ .word cpu_arm925_dcache_clean_area
+ .word cpu_arm925_switch_mm
+ .word cpu_arm925_set_pte
+ .size arm925_processor_functions, . - arm925_processor_functions
+
+ .section ".rodata"
+
+ .type cpu_arch_name, #object
+cpu_arch_name:
+ .asciz "armv4t"
+ .size cpu_arch_name, . - cpu_arch_name
+
+ .type cpu_elf_name, #object
+cpu_elf_name:
+ .asciz "v4"
+ .size cpu_elf_name, . - cpu_elf_name
+
+ .type cpu_arm925_name, #object
+cpu_arm925_name:
+ .ascii "ARM925T"
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ .ascii "i"
+#endif
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ .ascii "d"
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ .ascii "(wt)"
+#else
+ .ascii "(wb)"
+#endif
+#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
+ .ascii "RR"
+#endif
+#endif
+ .ascii "\0"
+ .size cpu_arm925_name, . - cpu_arm925_name
+
+ .align
+
+ .section ".proc.info", #alloc, #execinstr
+
+ .type __arm925_proc_info,#object
+__arm925_proc_info:
+ .long 0x54029250
+ .long 0xfffffff0
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __arm925_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB
+ .long cpu_arm925_name
+ .long arm925_processor_functions
+ .long v4wbi_tlb_fns
+ .long v4wb_user_fns
+ .long arm925_cache_fns
+ .size __arm925_proc_info, . - __arm925_proc_info
+
+ .type __arm915_proc_info,#object
+__arm915_proc_info:
+ .long 0x54029150
+ .long 0xfffffff0
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __arm925_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB
+ .long cpu_arm925_name
+ .long arm925_processor_functions
+ .long v4wbi_tlb_fns
+ .long v4wb_user_fns
+ .long arm925_cache_fns
+ .size __arm925_proc_info, . - __arm925_proc_info
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
new file mode 100644
index 0000000..bb95cc9
--- /dev/null
+++ b/arch/arm/mm/proc-arm926.S
@@ -0,0 +1,495 @@
+/*
+ * linux/arch/arm/mm/proc-arm926.S: MMU functions for ARM926EJ-S
+ *
+ * Copyright (C) 1999-2001 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * These are the low level assembler for performing cache and TLB
+ * functions on the arm926.
+ *
+ * CONFIG_CPU_ARM926_CPU_IDLE -> nohlt
+ */
+#include <linux/linkage.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/pgtable.h>
+#include <asm/procinfo.h>
+#include <asm/hardware.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include "proc-macros.S"
+
+/*
+ * This is the maximum size of an area which will be invalidated
+ * using the single invalidate entry instructions. Anything larger
+ * than this, and we go for the whole cache.
+ *
+ * This value should be chosen such that we choose the cheapest
+ * alternative.
+ */
+#define CACHE_DLIMIT 16384
+
+/*
+ * the cache line size of the I and D cache
+ */
+#define CACHE_DLINESIZE 32
+
+ .text
+/*
+ * cpu_arm926_proc_init()
+ */
+ENTRY(cpu_arm926_proc_init)
+ mov pc, lr
+
+/*
+ * cpu_arm926_proc_fin()
+ */
+ENTRY(cpu_arm926_proc_fin)
+ stmfd sp!, {lr}
+ mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+ msr cpsr_c, ip
+ bl arm926_flush_kern_cache_all
+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
+ bic r0, r0, #0x1000 @ ...i............
+ bic r0, r0, #0x000e @ ............wca.
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ ldmfd sp!, {pc}
+
+/*
+ * cpu_arm926_reset(loc)
+ *
+ * Perform a soft reset of the system. Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ */
+ .align 5
+ENTRY(cpu_arm926_reset)
+ mov ip, #0
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mrc p15, 0, ip, c1, c0, 0 @ ctrl register
+ bic ip, ip, #0x000f @ ............wcam
+ bic ip, ip, #0x1100 @ ...i...s........
+ mcr p15, 0, ip, c1, c0, 0 @ ctrl register
+ mov pc, r0
+
+/*
+ * cpu_arm926_do_idle()
+ *
+ * Called with IRQs disabled
+ */
+ .align 10
+ENTRY(cpu_arm926_do_idle)
+ mov r0, #0
+ mrc p15, 0, r1, c1, c0, 0 @ Read control register
+ mcr p15, 0, r0, c7, c10, 4 @ Drain write buffer
+ bic r2, r1, #1 << 12
+ mcr p15, 0, r2, c1, c0, 0 @ Disable I cache
+ mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
+ mcr p15, 0, r1, c1, c0, 0 @ Restore ICache enable
+ mov pc, lr
+
+/*
+ * flush_user_cache_all()
+ *
+ * Clean and invalidate all cache entries in a particular
+ * address space.
+ */
+ENTRY(arm926_flush_user_cache_all)
+ /* FALLTHROUGH */
+
+/*
+ * flush_kern_cache_all()
+ *
+ * Clean and invalidate the entire cache.
+ */
+ENTRY(arm926_flush_kern_cache_all)
+ mov r2, #VM_EXEC
+ mov ip, #0
+__flush_whole_cache:
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
+#else
+1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate
+ bne 1b
+#endif
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * flush_user_cache_range(start, end, flags)
+ *
+ * Clean and invalidate a range of cache entries in the
+ * specified address range.
+ *
+ * - start - start address (inclusive)
+ * - end - end address (exclusive)
+ * - flags - vm_flags describing address space
+ */
+ENTRY(arm926_flush_user_cache_range)
+ mov ip, #0
+ sub r3, r1, r0 @ calculate total size
+ cmp r3, #CACHE_DLIMIT
+ bgt __flush_whole_cache
+1: tst r2, #VM_EXEC
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+#else
+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+#endif
+ cmp r0, r1
+ blo 1b
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * coherent_kern_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start, end. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm926_coherent_kern_range)
+ /* FALLTHROUGH */
+
+/*
+ * coherent_user_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start, end. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm926_coherent_user_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * flush_kern_dcache_page(void *page)
+ *
+ * Ensure no D cache aliasing occurs, either with itself or
+ * the I cache
+ *
+ * - addr - page aligned address
+ */
+ENTRY(arm926_flush_kern_dcache_page)
+ add r1, r0, #PAGE_SZ
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_inv_range(start, end)
+ *
+ * Invalidate (discard) the specified virtual address range.
+ * May not write back any entries. If 'start' or 'end'
+ * are not cache line aligned, those lines must be written
+ * back.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(arm926_dma_inv_range)
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+ tst r0, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
+ tst r1, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
+#endif
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_clean_range(start, end)
+ *
+ * Clean the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(arm926_dma_clean_range)
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_flush_range(start, end)
+ *
+ * Clean and invalidate the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm926_dma_flush_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1:
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+#else
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+#endif
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+ENTRY(arm926_cache_fns)
+ .long arm926_flush_kern_cache_all
+ .long arm926_flush_user_cache_all
+ .long arm926_flush_user_cache_range
+ .long arm926_coherent_kern_range
+ .long arm926_coherent_user_range
+ .long arm926_flush_kern_dcache_page
+ .long arm926_dma_inv_range
+ .long arm926_dma_clean_range
+ .long arm926_dma_flush_range
+
+ENTRY(cpu_arm926_dcache_clean_area)
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ subs r1, r1, #CACHE_DLINESIZE
+ bhi 1b
+#endif
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/* =============================== PageTable ============================== */
+
+/*
+ * cpu_arm926_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+ .align 5
+ENTRY(cpu_arm926_switch_mm)
+ mov ip, #0
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
+#else
+@ && 'Clean & Invalidate whole DCache'
+1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate
+ bne 1b
+#endif
+ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mov pc, lr
+
+/*
+ * cpu_arm926_set_pte(ptep, pte)
+ *
+ * Set a PTE and flush it out
+ */
+ .align 5
+ENTRY(cpu_arm926_set_pte)
+ str r1, [r0], #-2048 @ linux version
+
+ eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+
+ bic r2, r1, #PTE_SMALL_AP_MASK
+ bic r2, r2, #PTE_TYPE_MASK
+ orr r2, r2, #PTE_TYPE_SMALL
+
+ tst r1, #L_PTE_USER @ User?
+ orrne r2, r2, #PTE_SMALL_AP_URO_SRW
+
+ tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
+ orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
+
+ tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
+ movne r2, #0
+
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ eor r3, r2, #0x0a @ C & small page?
+ tst r3, #0x0b
+ biceq r2, r2, #4
+#endif
+ str r2, [r0] @ hardware version
+ mov r0, r0
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+#endif
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+ __INIT
+
+ .type __arm926_setup, #function
+__arm926_setup:
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
+ mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
+
+
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mov r0, #4 @ disable write-back on caches explicitly
+ mcr p15, 7, r0, c15, c0, 0
+#endif
+
+ mrc p15, 0, r0, c1, c0 @ get control register v4
+ ldr r5, arm926_cr1_clear
+ bic r0, r0, r5
+ ldr r5, arm926_cr1_set
+ orr r0, r0, r5
+#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
+ orr r0, r0, #0x4000 @ .1.. .... .... ....
+#endif
+ mov pc, lr
+ .size __arm926_setup, . - __arm926_setup
+
+ /*
+ * R
+ * .RVI ZFRS BLDP WCAM
+ * .011 0001 ..11 0101
+ *
+ */
+ .type arm926_cr1_clear, #object
+ .type arm926_cr1_set, #object
+arm926_cr1_clear:
+ .word 0x7f3f
+arm926_cr1_set:
+ .word 0x3135
+
+ __INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ * come through these
+ */
+ .type arm926_processor_functions, #object
+arm926_processor_functions:
+ .word v5tj_early_abort
+ .word cpu_arm926_proc_init
+ .word cpu_arm926_proc_fin
+ .word cpu_arm926_reset
+ .word cpu_arm926_do_idle
+ .word cpu_arm926_dcache_clean_area
+ .word cpu_arm926_switch_mm
+ .word cpu_arm926_set_pte
+ .size arm926_processor_functions, . - arm926_processor_functions
+
+ .section ".rodata"
+
+ .type cpu_arch_name, #object
+cpu_arch_name:
+ .asciz "armv5tej"
+ .size cpu_arch_name, . - cpu_arch_name
+
+ .type cpu_elf_name, #object
+cpu_elf_name:
+ .asciz "v5"
+ .size cpu_elf_name, . - cpu_elf_name
+
+ .type cpu_arm926_name, #object
+cpu_arm926_name:
+ .ascii "ARM926EJ-S"
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ .ascii "i"
+#endif
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ .ascii "d"
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ .ascii "(wt)"
+#else
+ .ascii "(wb)"
+#endif
+#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
+ .ascii "RR"
+#endif
+#endif
+ .ascii "\0"
+ .size cpu_arm926_name, . - cpu_arm926_name
+
+ .align
+
+ .section ".proc.info", #alloc, #execinstr
+
+ .type __arm926_proc_info,#object
+__arm926_proc_info:
+ .long 0x41069260 @ ARM926EJ-S (v5TEJ)
+ .long 0xff0ffff0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __arm926_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA
+ .long cpu_arm926_name
+ .long arm926_processor_functions
+ .long v4wbi_tlb_fns
+ .long v4wb_user_fns
+ .long arm926_cache_fns
+ .size __arm926_proc_info, . - __arm926_proc_info
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
new file mode 100644
index 0000000..9137fe5
--- /dev/null
+++ b/arch/arm/mm/proc-macros.S
@@ -0,0 +1,51 @@
+/*
+ * We need constants.h for:
+ * VMA_VM_MM
+ * VMA_VM_FLAGS
+ * VM_EXEC
+ */
+#include <asm/constants.h>
+#include <asm/thread_info.h>
+
+/*
+ * vma_vm_mm - get mm pointer from vma pointer (vma->vm_mm)
+ */
+ .macro vma_vm_mm, rd, rn
+ ldr \rd, [\rn, #VMA_VM_MM]
+ .endm
+
+/*
+ * vma_vm_flags - get vma->vm_flags
+ */
+ .macro vma_vm_flags, rd, rn
+ ldr \rd, [\rn, #VMA_VM_FLAGS]
+ .endm
+
+ .macro tsk_mm, rd, rn
+ ldr \rd, [\rn, #TI_TASK]
+ ldr \rd, [\rd, #TSK_ACTIVE_MM]
+ .endm
+
+/*
+ * act_mm - get current->active_mm
+ */
+ .macro act_mm, rd
+ bic \rd, sp, #8128
+ bic \rd, \rd, #63
+ ldr \rd, [\rd, #TI_TASK]
+ ldr \rd, [\rd, #TSK_ACTIVE_MM]
+ .endm
+
+/*
+ * mmid - get context id from mm pointer (mm->context.id)
+ */
+ .macro mmid, rd, rn
+ ldr \rd, [\rn, #MM_CONTEXT_ID]
+ .endm
+
+/*
+ * mask_asid - mask the ASID from the context ID
+ */
+ .macro asid, rd, rn
+ and \rd, \rn, #255
+ .endm
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
new file mode 100644
index 0000000..360cae9
--- /dev/null
+++ b/arch/arm/mm/proc-sa110.S
@@ -0,0 +1,272 @@
+/*
+ * linux/arch/arm/mm/proc-sa110.S
+ *
+ * Copyright (C) 1997-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * MMU functions for SA110
+ *
+ * These are the low level assembler for performing cache and TLB
+ * functions on the StrongARM-110.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/constants.h>
+#include <asm/procinfo.h>
+#include <asm/hardware.h>
+#include <asm/pgtable.h>
+#include <asm/ptrace.h>
+
+/*
+ * the cache line size of the I and D cache
+ */
+#define DCACHELINESIZE 32
+#define FLUSH_OFFSET 32768
+
+ .macro flush_110_dcache rd, ra, re
+ ldr \rd, =flush_base
+ ldr \ra, [\rd]
+ eor \ra, \ra, #FLUSH_OFFSET
+ str \ra, [\rd]
+ add \re, \ra, #16384 @ only necessary for 16k
+1001: ldr \rd, [\ra], #DCACHELINESIZE
+ teq \re, \ra
+ bne 1001b
+ .endm
+
+ .data
+flush_base:
+ .long FLUSH_BASE
+ .text
+
+/*
+ * cpu_sa110_proc_init()
+ */
+ENTRY(cpu_sa110_proc_init)
+ mov r0, #0
+ mcr p15, 0, r0, c15, c1, 2 @ Enable clock switching
+ mov pc, lr
+
+/*
+ * cpu_sa110_proc_fin()
+ */
+ENTRY(cpu_sa110_proc_fin)
+ stmfd sp!, {lr}
+ mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+ msr cpsr_c, ip
+ bl v4wb_flush_kern_cache_all @ clean caches
+1: mov r0, #0
+ mcr p15, 0, r0, c15, c2, 2 @ Disable clock switching
+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
+ bic r0, r0, #0x1000 @ ...i............
+ bic r0, r0, #0x000e @ ............wca.
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ ldmfd sp!, {pc}
+
+/*
+ * cpu_sa110_reset(loc)
+ *
+ * Perform a soft reset of the system. Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ */
+ .align 5
+ENTRY(cpu_sa110_reset)
+ mov ip, #0
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mrc p15, 0, ip, c1, c0, 0 @ ctrl register
+ bic ip, ip, #0x000f @ ............wcam
+ bic ip, ip, #0x1100 @ ...i...s........
+ mcr p15, 0, ip, c1, c0, 0 @ ctrl register
+ mov pc, r0
+
+/*
+ * cpu_sa110_do_idle(type)
+ *
+ * Cause the processor to idle
+ *
+ * type: call type:
+ * 0 = slow idle
+ * 1 = fast idle
+ * 2 = switch to slow processor clock
+ * 3 = switch to fast processor clock
+ */
+ .align 5
+
+ENTRY(cpu_sa110_do_idle)
+ mcr p15, 0, ip, c15, c2, 2 @ disable clock switching
+ ldr r1, =UNCACHEABLE_ADDR @ load from uncacheable loc
+ ldr r1, [r1, #0] @ force switch to MCLK
+ mov r0, r0 @ safety
+ mov r0, r0 @ safety
+ mov r0, r0 @ safety
+ mcr p15, 0, r0, c15, c8, 2 @ Wait for interrupt, cache aligned
+ mov r0, r0 @ safety
+ mov r0, r0 @ safety
+ mov r0, r0 @ safety
+ mcr p15, 0, r0, c15, c1, 2 @ enable clock switching
+ mov pc, lr
+
+/* ================================= CACHE ================================ */
+
+/*
+ * cpu_sa110_dcache_clean_area(addr,sz)
+ *
+ * Clean the specified entry of any caches such that the MMU
+ * translation fetches will obtain correct data.
+ *
+ * addr: cache-unaligned virtual address
+ */
+ .align 5
+ENTRY(cpu_sa110_dcache_clean_area)
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #DCACHELINESIZE
+ subs r1, r1, #DCACHELINESIZE
+ bhi 1b
+ mov pc, lr
+
+/* =============================== PageTable ============================== */
+
+/*
+ * cpu_sa110_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+ .align 5
+ENTRY(cpu_sa110_switch_mm)
+ flush_110_dcache r3, ip, r1
+ mov r1, #0
+ mcr p15, 0, r1, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, r1, c7, c10, 4 @ drain WB
+ mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
+ mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
+ mov pc, lr
+
+/*
+ * cpu_sa110_set_pte(ptep, pte)
+ *
+ * Set a PTE and flush it out
+ */
+ .align 5
+ENTRY(cpu_sa110_set_pte)
+ str r1, [r0], #-2048 @ linux version
+
+ eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+
+ bic r2, r1, #PTE_SMALL_AP_MASK
+ bic r2, r2, #PTE_TYPE_MASK
+ orr r2, r2, #PTE_TYPE_SMALL
+
+ tst r1, #L_PTE_USER @ User?
+ orrne r2, r2, #PTE_SMALL_AP_URO_SRW
+
+ tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
+ orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
+
+ tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
+ movne r2, #0
+
+ str r2, [r0] @ hardware version
+ mov r0, r0
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+ __INIT
+
+ .type __sa110_setup, #function
+__sa110_setup:
+ mov r10, #0
+ mcr p15, 0, r10, c7, c7 @ invalidate I,D caches on v4
+ mcr p15, 0, r10, c7, c10, 4 @ drain write buffer on v4
+ mcr p15, 0, r10, c8, c7 @ invalidate I,D TLBs on v4
+ mrc p15, 0, r0, c1, c0 @ get control register v4
+ ldr r5, sa110_cr1_clear
+ bic r0, r0, r5
+ ldr r5, sa110_cr1_set
+ orr r0, r0, r5
+ mov pc, lr
+ .size __sa110_setup, . - __sa110_setup
+
+ /*
+ * R
+ * .RVI ZFRS BLDP WCAM
+ * ..01 0001 ..11 1101
+ *
+ */
+ .type sa110_cr1_clear, #object
+ .type sa110_cr1_set, #object
+sa110_cr1_clear:
+ .word 0x3f3f
+sa110_cr1_set:
+ .word 0x113d
+
+ __INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ * come through these
+ */
+
+ .type sa110_processor_functions, #object
+ENTRY(sa110_processor_functions)
+ .word v4_early_abort
+ .word cpu_sa110_proc_init
+ .word cpu_sa110_proc_fin
+ .word cpu_sa110_reset
+ .word cpu_sa110_do_idle
+ .word cpu_sa110_dcache_clean_area
+ .word cpu_sa110_switch_mm
+ .word cpu_sa110_set_pte
+ .size sa110_processor_functions, . - sa110_processor_functions
+
+ .section ".rodata"
+
+ .type cpu_arch_name, #object
+cpu_arch_name:
+ .asciz "armv4"
+ .size cpu_arch_name, . - cpu_arch_name
+
+ .type cpu_elf_name, #object
+cpu_elf_name:
+ .asciz "v4"
+ .size cpu_elf_name, . - cpu_elf_name
+
+ .type cpu_sa110_name, #object
+cpu_sa110_name:
+ .asciz "StrongARM-110"
+ .size cpu_sa110_name, . - cpu_sa110_name
+
+ .align
+
+ .section ".proc.info", #alloc, #execinstr
+
+ .type __sa110_proc_info,#object
+__sa110_proc_info:
+ .long 0x4401a100
+ .long 0xfffffff0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __sa110_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT | HWCAP_FAST_MULT
+ .long cpu_sa110_name
+ .long sa110_processor_functions
+ .long v4wb_tlb_fns
+ .long v4wb_user_fns
+ .long v4wb_cache_fns
+ .size __sa110_proc_info, . - __sa110_proc_info
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
new file mode 100644
index 0000000..d447cd5
--- /dev/null
+++ b/arch/arm/mm/proc-sa1100.S
@@ -0,0 +1,323 @@
+/*
+ * linux/arch/arm/mm/proc-sa1100.S
+ *
+ * Copyright (C) 1997-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * MMU functions for SA110
+ *
+ * These are the low level assembler for performing cache and TLB
+ * functions on the StrongARM-1100 and StrongARM-1110.
+ *
+ * Note that SA1100 and SA1110 share everything but their name and CPU ID.
+ *
+ * 12-jun-2000, Erik Mouw (J.A.K.Mouw@its.tudelft.nl):
+ * Flush the read buffer at context switches
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/constants.h>
+#include <asm/procinfo.h>
+#include <asm/hardware.h>
+#include <asm/pgtable.h>
+
+/*
+ * the cache line size of the I and D cache
+ */
+#define DCACHELINESIZE 32
+#define FLUSH_OFFSET 32768
+
+ .macro flush_1100_dcache rd, ra, re
+ ldr \rd, =flush_base
+ ldr \ra, [\rd]
+ eor \ra, \ra, #FLUSH_OFFSET
+ str \ra, [\rd]
+ add \re, \ra, #8192 @ only necessary for 8k
+1001: ldr \rd, [\ra], #DCACHELINESIZE
+ teq \re, \ra
+ bne 1001b
+#ifdef FLUSH_BASE_MINICACHE
+ add \ra, \ra, #FLUSH_BASE_MINICACHE - FLUSH_BASE
+ add \re, \ra, #512 @ only 512 bytes
+1002: ldr \rd, [\ra], #DCACHELINESIZE
+ teq \re, \ra
+ bne 1002b
+#endif
+ .endm
+
+ .data
+flush_base:
+ .long FLUSH_BASE
+ .text
+
+ __INIT
+
+/*
+ * cpu_sa1100_proc_init()
+ */
+ENTRY(cpu_sa1100_proc_init)
+ mov r0, #0
+ mcr p15, 0, r0, c15, c1, 2 @ Enable clock switching
+ mcr p15, 0, r0, c9, c0, 5 @ Allow read-buffer operations from userland
+ mov pc, lr
+
+ .previous
+
+/*
+ * cpu_sa1100_proc_fin()
+ *
+ * Prepare the CPU for reset:
+ * - Disable interrupts
+ * - Clean and turn off caches.
+ */
+ENTRY(cpu_sa1100_proc_fin)
+ stmfd sp!, {lr}
+ mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+ msr cpsr_c, ip
+ flush_1100_dcache r0, r1, r2 @ clean caches
+ mov r0, #0
+ mcr p15, 0, r0, c15, c2, 2 @ Disable clock switching
+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
+ bic r0, r0, #0x1000 @ ...i............
+ bic r0, r0, #0x000e @ ............wca.
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ ldmfd sp!, {pc}
+
+/*
+ * cpu_sa1100_reset(loc)
+ *
+ * Perform a soft reset of the system. Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ */
+ .align 5
+ENTRY(cpu_sa1100_reset)
+ mov ip, #0
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mrc p15, 0, ip, c1, c0, 0 @ ctrl register
+ bic ip, ip, #0x000f @ ............wcam
+ bic ip, ip, #0x1100 @ ...i...s........
+ mcr p15, 0, ip, c1, c0, 0 @ ctrl register
+ mov pc, r0
+
+/*
+ * cpu_sa1100_do_idle(type)
+ *
+ * Cause the processor to idle
+ *
+ * type: call type:
+ * 0 = slow idle
+ * 1 = fast idle
+ * 2 = switch to slow processor clock
+ * 3 = switch to fast processor clock
+ */
+ .align 5
+ENTRY(cpu_sa1100_do_idle)
+ mov r0, r0 @ 4 nop padding
+ mov r0, r0
+ mov r0, r0
+ mov r0, r0 @ 4 nop padding
+ mov r0, r0
+ mov r0, r0
+ mov r0, #0
+ ldr r1, =UNCACHEABLE_ADDR @ ptr to uncacheable address
+ @ --- aligned to a cache line
+ mcr p15, 0, r0, c15, c2, 2 @ disable clock switching
+ ldr r1, [r1, #0] @ force switch to MCLK
+ mcr p15, 0, r0, c15, c8, 2 @ wait for interrupt
+ mov r0, r0 @ safety
+ mcr p15, 0, r0, c15, c1, 2 @ enable clock switching
+ mov pc, lr
+
+/* ================================= CACHE ================================ */
+
+/*
+ * cpu_sa1100_dcache_clean_area(addr,sz)
+ *
+ * Clean the specified entry of any caches such that the MMU
+ * translation fetches will obtain correct data.
+ *
+ * addr: cache-unaligned virtual address
+ */
+ .align 5
+ENTRY(cpu_sa1100_dcache_clean_area)
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #DCACHELINESIZE
+ subs r1, r1, #DCACHELINESIZE
+ bhi 1b
+ mov pc, lr
+
+/* =============================== PageTable ============================== */
+
+/*
+ * cpu_sa1100_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+ .align 5
+ENTRY(cpu_sa1100_switch_mm)
+ flush_1100_dcache r3, ip, r1
+ mov ip, #0
+ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, ip, c9, c0, 0 @ invalidate RB
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mov pc, lr
+
+/*
+ * cpu_sa1100_set_pte(ptep, pte)
+ *
+ * Set a PTE and flush it out
+ */
+ .align 5
+ENTRY(cpu_sa1100_set_pte)
+ str r1, [r0], #-2048 @ linux version
+
+ eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+
+ bic r2, r1, #PTE_SMALL_AP_MASK
+ bic r2, r2, #PTE_TYPE_MASK
+ orr r2, r2, #PTE_TYPE_SMALL
+
+ tst r1, #L_PTE_USER @ User?
+ orrne r2, r2, #PTE_SMALL_AP_URO_SRW
+
+ tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
+ orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
+
+ tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
+ movne r2, #0
+
+ str r2, [r0] @ hardware version
+ mov r0, r0
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+ __INIT
+
+ .type __sa1100_setup, #function
+__sa1100_setup:
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
+ mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
+ mrc p15, 0, r0, c1, c0 @ get control register v4
+ ldr r5, sa1100_cr1_clear
+ bic r0, r0, r5
+ ldr r5, sa1100_cr1_set
+ orr r0, r0, r5
+ mov pc, lr
+ .size __sa1100_setup, . - __sa1100_setup
+
+ /*
+ * R
+ * .RVI ZFRS BLDP WCAM
+ * ..11 0001 ..11 1101
+ *
+ */
+ .type sa1100_cr1_clear, #object
+ .type sa1100_cr1_set, #object
+sa1100_cr1_clear:
+ .word 0x3f3f
+sa1100_cr1_set:
+ .word 0x313d
+
+ __INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ * come through these
+ */
+
+/*
+ * SA1100 and SA1110 share the same function calls
+ */
+ .type sa1100_processor_functions, #object
+ENTRY(sa1100_processor_functions)
+ .word v4_early_abort
+ .word cpu_sa1100_proc_init
+ .word cpu_sa1100_proc_fin
+ .word cpu_sa1100_reset
+ .word cpu_sa1100_do_idle
+ .word cpu_sa1100_dcache_clean_area
+ .word cpu_sa1100_switch_mm
+ .word cpu_sa1100_set_pte
+ .size sa1100_processor_functions, . - sa1100_processor_functions
+
+ .section ".rodata"
+
+ .type cpu_arch_name, #object
+cpu_arch_name:
+ .asciz "armv4"
+ .size cpu_arch_name, . - cpu_arch_name
+
+ .type cpu_elf_name, #object
+cpu_elf_name:
+ .asciz "v4"
+ .size cpu_elf_name, . - cpu_elf_name
+
+ .type cpu_sa1100_name, #object
+cpu_sa1100_name:
+ .asciz "StrongARM-1100"
+ .size cpu_sa1100_name, . - cpu_sa1100_name
+
+ .type cpu_sa1110_name, #object
+cpu_sa1110_name:
+ .asciz "StrongARM-1110"
+ .size cpu_sa1110_name, . - cpu_sa1110_name
+
+ .align
+
+ .section ".proc.info", #alloc, #execinstr
+
+ .type __sa1100_proc_info,#object
+__sa1100_proc_info:
+ .long 0x4401a110
+ .long 0xfffffff0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __sa1100_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT | HWCAP_FAST_MULT
+ .long cpu_sa1100_name
+ .long sa1100_processor_functions
+ .long v4wb_tlb_fns
+ .long v4_mc_user_fns
+ .long v4wb_cache_fns
+ .size __sa1100_proc_info, . - __sa1100_proc_info
+
+ .type __sa1110_proc_info,#object
+__sa1110_proc_info:
+ .long 0x6901b110
+ .long 0xfffffff0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __sa1100_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT | HWCAP_FAST_MULT
+ .long cpu_sa1110_name
+ .long sa1100_processor_functions
+ .long v4wb_tlb_fns
+ .long v4_mc_user_fns
+ .long v4wb_cache_fns
+ .size __sa1110_proc_info, . - __sa1110_proc_info
diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c
new file mode 100644
index 0000000..6c5f0fe
--- /dev/null
+++ b/arch/arm/mm/proc-syms.c
@@ -0,0 +1,40 @@
+/*
+ * linux/arch/arm/mm/proc-syms.c
+ *
+ * Copyright (C) 2000-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/mm.h>
+
+#include <asm/cacheflush.h>
+#include <asm/proc-fns.h>
+#include <asm/tlbflush.h>
+
+#ifndef MULTI_CPU
+EXPORT_SYMBOL(cpu_dcache_clean_area);
+EXPORT_SYMBOL(cpu_set_pte);
+#else
+EXPORT_SYMBOL(processor);
+#endif
+
+#ifndef MULTI_CACHE
+EXPORT_SYMBOL(__cpuc_flush_kern_all);
+EXPORT_SYMBOL(__cpuc_flush_user_all);
+EXPORT_SYMBOL(__cpuc_flush_user_range);
+EXPORT_SYMBOL(__cpuc_coherent_kern_range);
+#else
+EXPORT_SYMBOL(cpu_cache);
+#endif
+
+/*
+ * No module should need to touch the TLB (and currently
+ * no modules do. We export this for "loadkernel" support
+ * (booting a new kernel from within a running kernel.)
+ */
+#ifdef MULTI_TLB
+EXPORT_SYMBOL(cpu_tlb);
+#endif
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
new file mode 100644
index 0000000..0aa73d4
--- /dev/null
+++ b/arch/arm/mm/proc-v6.S
@@ -0,0 +1,272 @@
+/*
+ * linux/arch/arm/mm/proc-v6.S
+ *
+ * Copyright (C) 2001 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This is the "shell" of the ARMv6 processor support.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/constants.h>
+#include <asm/procinfo.h>
+#include <asm/pgtable.h>
+
+#include "proc-macros.S"
+
+#define D_CACHE_LINE_SIZE 32
+
+ .macro cpsie, flags
+ .ifc \flags, f
+ .long 0xf1080040
+ .exitm
+ .endif
+ .ifc \flags, i
+ .long 0xf1080080
+ .exitm
+ .endif
+ .ifc \flags, if
+ .long 0xf10800c0
+ .exitm
+ .endif
+ .err
+ .endm
+
+ .macro cpsid, flags
+ .ifc \flags, f
+ .long 0xf10c0040
+ .exitm
+ .endif
+ .ifc \flags, i
+ .long 0xf10c0080
+ .exitm
+ .endif
+ .ifc \flags, if
+ .long 0xf10c00c0
+ .exitm
+ .endif
+ .err
+ .endm
+
+ENTRY(cpu_v6_proc_init)
+ mov pc, lr
+
+ENTRY(cpu_v6_proc_fin)
+ mov pc, lr
+
+/*
+ * cpu_v6_reset(loc)
+ *
+ * Perform a soft reset of the system. Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * - loc - location to jump to for soft reset
+ *
+ * It is assumed that:
+ */
+ .align 5
+ENTRY(cpu_v6_reset)
+ mov pc, r0
+
+/*
+ * cpu_v6_do_idle()
+ *
+ * Idle the processor (eg, wait for interrupt).
+ *
+ * IRQs are already disabled.
+ */
+ENTRY(cpu_v6_do_idle)
+ mcr p15, 0, r1, c7, c0, 4 @ wait for interrupt
+ mov pc, lr
+
+ENTRY(cpu_v6_dcache_clean_area)
+#ifndef TLB_CAN_READ_FROM_L1_CACHE
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #D_CACHE_LINE_SIZE
+ subs r1, r1, #D_CACHE_LINE_SIZE
+ bhi 1b
+#endif
+ mov pc, lr
+
+/*
+ * cpu_arm926_switch_mm(pgd_phys, tsk)
+ *
+ * Set the translation table base pointer to be pgd_phys
+ *
+ * - pgd_phys - physical address of new TTB
+ *
+ * It is assumed that:
+ * - we are not using split page tables
+ */
+ENTRY(cpu_v6_switch_mm)
+ mov r2, #0
+ ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
+ mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
+ mcr p15, 0, r2, c7, c10, 4 @ drain write buffer
+ mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
+ mcr p15, 0, r1, c13, c0, 1 @ set context ID
+ mov pc, lr
+
+#define nG (1 << 11)
+#define APX (1 << 9)
+#define AP1 (1 << 5)
+#define AP0 (1 << 4)
+#define XN (1 << 0)
+
+/*
+ * cpu_v6_set_pte(ptep, pte)
+ *
+ * Set a level 2 translation table entry.
+ *
+ * - ptep - pointer to level 2 translation table entry
+ * (hardware version is stored at -1024 bytes)
+ * - pte - PTE value to store
+ *
+ * Permissions:
+ * YUWD APX AP1 AP0 SVC User
+ * 0xxx 0 0 0 no acc no acc
+ * 100x 1 0 1 r/o no acc
+ * 10x0 1 0 1 r/o no acc
+ * 1011 0 0 1 r/w no acc
+ * 110x 1 1 0 r/o r/o
+ * 11x0 1 1 0 r/o r/o
+ * 1111 0 1 1 r/w r/w
+ */
+ENTRY(cpu_v6_set_pte)
+ str r1, [r0], #-2048 @ linux version
+
+ bic r2, r1, #0x00000ff0
+ bic r2, r2, #0x00000003
+ orr r2, r2, #AP0 | 2
+
+ tst r1, #L_PTE_WRITE
+ tstne r1, #L_PTE_DIRTY
+ orreq r2, r2, #APX
+
+ tst r1, #L_PTE_USER
+ orrne r2, r2, #AP1 | nG
+ tstne r2, #APX
+ eorne r2, r2, #AP0
+
+ tst r1, #L_PTE_YOUNG
+ biceq r2, r2, #APX | AP1 | AP0
+
+@ tst r1, #L_PTE_EXEC
+@ orreq r2, r2, #XN
+
+ tst r1, #L_PTE_PRESENT
+ moveq r2, #0
+
+ str r2, [r0]
+ mcr p15, 0, r0, c7, c10, 1 @ flush_pte
+ mov pc, lr
+
+
+
+
+cpu_v6_name:
+ .asciz "Some Random V6 Processor"
+ .align
+
+ .section ".text.init", #alloc, #execinstr
+
+/*
+ * __v6_setup
+ *
+ * Initialise TLB, Caches, and MMU state ready to switch the MMU
+ * on. Return in r0 the new CP15 C1 control register setting.
+ *
+ * We automatically detect if we have a Harvard cache, and use the
+ * Harvard cache control instructions insead of the unified cache
+ * control instructions.
+ *
+ * This should be able to cover all ARMv6 cores.
+ *
+ * It is assumed that:
+ * - cache type register is implemented
+ */
+__v6_setup:
+ mov r0, #0
+ mcr p15, 0, r0, c7, c14, 0 @ clean+invalidate D cache
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, r0, c7, c15, 0 @ clean+invalidate cache
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs
+ mcr p15, 0, r0, c2, c0, 2 @ TTB control register
+ mcr p15, 0, r4, c2, c0, 1 @ load TTB1
+#ifdef CONFIG_VFP
+ mrc p15, 0, r0, c1, c0, 2
+ orr r0, r0, #(3 << 20)
+ mcr p15, 0, r0, c1, c0, 2 @ Enable full access to VFP
+#endif
+ mrc p15, 0, r0, c1, c0, 0 @ read control register
+ ldr r5, v6_cr1_clear @ get mask for bits to clear
+ bic r0, r0, r5 @ clear bits them
+ ldr r5, v6_cr1_set @ get mask for bits to set
+ orr r0, r0, r5 @ set them
+ mov pc, lr @ return to head.S:__ret
+
+ /*
+ * V X F I D LR
+ * .... ...E PUI. .T.T 4RVI ZFRS BLDP WCAM
+ * rrrr rrrx xxx0 0101 xxxx xxxx x111 xxxx < forced
+ * 0 110 0011 1.00 .111 1101 < we want
+ */
+ .type v6_cr1_clear, #object
+ .type v6_cr1_set, #object
+v6_cr1_clear:
+ .word 0x01e0fb7f
+v6_cr1_set:
+ .word 0x00c0387d
+
+ .type v6_processor_functions, #object
+ENTRY(v6_processor_functions)
+ .word v6_early_abort
+ .word cpu_v6_proc_init
+ .word cpu_v6_proc_fin
+ .word cpu_v6_reset
+ .word cpu_v6_do_idle
+ .word cpu_v6_dcache_clean_area
+ .word cpu_v6_switch_mm
+ .word cpu_v6_set_pte
+ .size v6_processor_functions, . - v6_processor_functions
+
+ .type cpu_arch_name, #object
+cpu_arch_name:
+ .asciz "armv6"
+ .size cpu_arch_name, . - cpu_arch_name
+
+ .type cpu_elf_name, #object
+cpu_elf_name:
+ .asciz "v6"
+ .size cpu_elf_name, . - cpu_elf_name
+ .align
+
+ .section ".proc.info", #alloc, #execinstr
+
+ /*
+ * Match any ARMv6 processor core.
+ */
+ .type __v6_proc_info, #object
+__v6_proc_info:
+ .long 0x0007b000
+ .long 0x0007f000
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __v6_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_VFP|HWCAP_EDSP|HWCAP_JAVA
+ .long cpu_v6_name
+ .long v6_processor_functions
+ .long v6wbi_tlb_fns
+ .long v6_user_fns
+ .long v6_cache_fns
+ .size __v6_proc_info, . - __v6_proc_info
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
new file mode 100644
index 0000000..2d977b4
--- /dev/null
+++ b/arch/arm/mm/proc-xscale.S
@@ -0,0 +1,934 @@
+/*
+ * linux/arch/arm/mm/proc-xscale.S
+ *
+ * Author: Nicolas Pitre
+ * Created: November 2000
+ * Copyright: (C) 2000, 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * MMU functions for the Intel XScale CPUs
+ *
+ * 2001 Aug 21:
+ * some contributions by Brett Gaines <brett.w.gaines@intel.com>
+ * Copyright 2001 by Intel Corp.
+ *
+ * 2001 Sep 08:
+ * Completely revisited, many important fixes
+ * Nicolas Pitre <nico@cam.org>
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/procinfo.h>
+#include <asm/hardware.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include "proc-macros.S"
+
+/*
+ * This is the maximum size of an area which will be flushed. If the area
+ * is larger than this, then we flush the whole cache
+ */
+#define MAX_AREA_SIZE 32768
+
+/*
+ * the cache line size of the I and D cache
+ */
+#define CACHELINESIZE 32
+
+/*
+ * the size of the data cache
+ */
+#define CACHESIZE 32768
+
+/*
+ * Virtual address used to allocate the cache when flushed
+ *
+ * This must be an address range which is _never_ used. It should
+ * apparently have a mapping in the corresponding page table for
+ * compatibility with future CPUs that _could_ require it. For instance we
+ * don't care.
+ *
+ * This must be aligned on a 2*CACHESIZE boundary. The code selects one of
+ * the 2 areas in alternance each time the clean_d_cache macro is used.
+ * Without this the XScale core exhibits cache eviction problems and no one
+ * knows why.
+ *
+ * Reminder: the vector table is located at 0xffff0000-0xffff0fff.
+ */
+#define CLEAN_ADDR 0xfffe0000
+
+/*
+ * This macro is used to wait for a CP15 write and is needed
+ * when we have to ensure that the last operation to the co-pro
+ * was completed before continuing with operation.
+ */
+ .macro cpwait, rd
+ mrc p15, 0, \rd, c2, c0, 0 @ arbitrary read of cp15
+ mov \rd, \rd @ wait for completion
+ sub pc, pc, #4 @ flush instruction pipeline
+ .endm
+
+ .macro cpwait_ret, lr, rd
+ mrc p15, 0, \rd, c2, c0, 0 @ arbitrary read of cp15
+ sub pc, \lr, \rd, LSR #32 @ wait for completion and
+ @ flush instruction pipeline
+ .endm
+
+/*
+ * This macro cleans the entire dcache using line allocate.
+ * The main loop has been unrolled to reduce loop overhead.
+ * rd and rs are two scratch registers.
+ */
+ .macro clean_d_cache, rd, rs
+ ldr \rs, =clean_addr
+ ldr \rd, [\rs]
+ eor \rd, \rd, #CACHESIZE
+ str \rd, [\rs]
+ add \rs, \rd, #CACHESIZE
+1: mcr p15, 0, \rd, c7, c2, 5 @ allocate D cache line
+ add \rd, \rd, #CACHELINESIZE
+ mcr p15, 0, \rd, c7, c2, 5 @ allocate D cache line
+ add \rd, \rd, #CACHELINESIZE
+ mcr p15, 0, \rd, c7, c2, 5 @ allocate D cache line
+ add \rd, \rd, #CACHELINESIZE
+ mcr p15, 0, \rd, c7, c2, 5 @ allocate D cache line
+ add \rd, \rd, #CACHELINESIZE
+ teq \rd, \rs
+ bne 1b
+ .endm
+
+ .data
+clean_addr: .word CLEAN_ADDR
+
+ .text
+
+/*
+ * cpu_xscale_proc_init()
+ *
+ * Nothing too exciting at the moment
+ */
+ENTRY(cpu_xscale_proc_init)
+ mov pc, lr
+
+/*
+ * cpu_xscale_proc_fin()
+ */
+ENTRY(cpu_xscale_proc_fin)
+ str lr, [sp, #-4]!
+ mov r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
+ msr cpsr_c, r0
+ bl xscale_flush_kern_cache_all @ clean caches
+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
+ bic r0, r0, #0x1800 @ ...IZ...........
+ bic r0, r0, #0x0006 @ .............CA.
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ ldr pc, [sp], #4
+
+/*
+ * cpu_xscale_reset(loc)
+ *
+ * Perform a soft reset of the system. Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ */
+ .align 5
+ENTRY(cpu_xscale_reset)
+ mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
+ msr cpsr_c, r1 @ reset CPSR
+ mrc p15, 0, r1, c1, c0, 0 @ ctrl register
+ bic r1, r1, #0x0086 @ ........B....CA.
+ bic r1, r1, #0x3900 @ ..VIZ..S........
+ mcr p15, 0, r1, c1, c0, 0 @ ctrl register
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches & BTB
+ bic r1, r1, #0x0001 @ ...............M
+ mcr p15, 0, r1, c1, c0, 0 @ ctrl register
+ @ CAUTION: MMU turned off from this point. We count on the pipeline
+ @ already containing those two last instructions to survive.
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mov pc, r0
+
+/*
+ * cpu_xscale_do_idle()
+ *
+ * Cause the processor to idle
+ *
+ * For now we do nothing but go to idle mode for every case
+ *
+ * XScale supports clock switching, but using idle mode support
+ * allows external hardware to react to system state changes.
+ */
+ .align 5
+
+ENTRY(cpu_xscale_do_idle)
+ mov r0, #1
+ mcr p14, 0, r0, c7, c0, 0 @ Go to IDLE
+ mov pc, lr
+
+/* ================================= CACHE ================================ */
+
+/*
+ * flush_user_cache_all()
+ *
+ * Invalidate all cache entries in a particular address
+ * space.
+ */
+ENTRY(xscale_flush_user_cache_all)
+ /* FALLTHROUGH */
+
+/*
+ * flush_kern_cache_all()
+ *
+ * Clean and invalidate the entire cache.
+ */
+ENTRY(xscale_flush_kern_cache_all)
+ mov r2, #VM_EXEC
+ mov ip, #0
+__flush_whole_cache:
+ clean_d_cache r0, r1
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB
+ mcrne p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mov pc, lr
+
+/*
+ * flush_user_cache_range(start, end, vm_flags)
+ *
+ * Invalidate a range of cache entries in the specified
+ * address space.
+ *
+ * - start - start address (may not be aligned)
+ * - end - end address (exclusive, may not be aligned)
+ * - vma - vma_area_struct describing address space
+ */
+ .align 5
+ENTRY(xscale_flush_user_cache_range)
+ mov ip, #0
+ sub r3, r1, r0 @ calculate total size
+ cmp r3, #MAX_AREA_SIZE
+ bhs __flush_whole_cache
+
+1: tst r2, #VM_EXEC
+ mcrne p15, 0, r0, c7, c5, 1 @ Invalidate I cache line
+ mcr p15, 0, r0, c7, c10, 1 @ Clean D cache line
+ mcr p15, 0, r0, c7, c6, 1 @ Invalidate D cache line
+ add r0, r0, #CACHELINESIZE
+ cmp r0, r1
+ blo 1b
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c5, 6 @ Invalidate BTB
+ mcrne p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mov pc, lr
+
+/*
+ * coherent_kern_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * Note: single I-cache line invalidation isn't used here since
+ * it also trashes the mini I-cache used by JTAG debuggers.
+ */
+ENTRY(xscale_coherent_kern_range)
+ /* FALLTHROUGH */
+
+/*
+ * coherent_user_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * Note: single I-cache line invalidation isn't used here since
+ * it also trashes the mini I-cache used by JTAG debuggers.
+ */
+ENTRY(xscale_coherent_user_range)
+ bic r0, r0, #CACHELINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHELINESIZE
+ cmp r0, r1
+ blo 1b
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB
+ mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mov pc, lr
+
+/*
+ * flush_kern_dcache_page(void *page)
+ *
+ * Ensure no D cache aliasing occurs, either with itself or
+ * the I cache
+ *
+ * - addr - page aligned address
+ */
+ENTRY(xscale_flush_kern_dcache_page)
+ add r1, r0, #PAGE_SZ
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHELINESIZE
+ cmp r0, r1
+ blo 1b
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB
+ mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mov pc, lr
+
+/*
+ * dma_inv_range(start, end)
+ *
+ * Invalidate (discard) the specified virtual address range.
+ * May not write back any entries. If 'start' or 'end'
+ * are not cache line aligned, those lines must be written
+ * back.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(xscale_dma_inv_range)
+ mrc p15, 0, r2, c0, c0, 0 @ read ID
+ eor r2, r2, #0x69000000
+ eor r2, r2, #0x00052000
+ bics r2, r2, #1
+ beq xscale_dma_flush_range
+
+ tst r0, #CACHELINESIZE - 1
+ bic r0, r0, #CACHELINESIZE - 1
+ mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
+ tst r1, #CACHELINESIZE - 1
+ mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
+1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHELINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mov pc, lr
+
+/*
+ * dma_clean_range(start, end)
+ *
+ * Clean the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(xscale_dma_clean_range)
+ bic r0, r0, #CACHELINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHELINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mov pc, lr
+
+/*
+ * dma_flush_range(start, end)
+ *
+ * Clean and invalidate the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(xscale_dma_flush_range)
+ bic r0, r0, #CACHELINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHELINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mov pc, lr
+
+ENTRY(xscale_cache_fns)
+ .long xscale_flush_kern_cache_all
+ .long xscale_flush_user_cache_all
+ .long xscale_flush_user_cache_range
+ .long xscale_coherent_kern_range
+ .long xscale_coherent_user_range
+ .long xscale_flush_kern_dcache_page
+ .long xscale_dma_inv_range
+ .long xscale_dma_clean_range
+ .long xscale_dma_flush_range
+
+ENTRY(cpu_xscale_dcache_clean_area)
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHELINESIZE
+ subs r1, r1, #CACHELINESIZE
+ bhi 1b
+ mov pc, lr
+
+/* ================================ CACHE LOCKING============================
+ *
+ * The XScale MicroArchitecture implements support for locking entries into
+ * the data and instruction cache. The following functions implement the core
+ * low level instructions needed to accomplish the locking. The developer's
+ * manual states that the code that performs the locking must be in non-cached
+ * memory. To accomplish this, the code in xscale-cache-lock.c copies the
+ * following functions from the cache into a non-cached memory region that
+ * is allocated through consistent_alloc().
+ *
+ */
+ .align 5
+/*
+ * xscale_icache_lock
+ *
+ * r0: starting address to lock
+ * r1: end address to lock
+ */
+ENTRY(xscale_icache_lock)
+
+iLockLoop:
+ bic r0, r0, #CACHELINESIZE - 1
+ mcr p15, 0, r0, c9, c1, 0 @ lock into cache
+ cmp r0, r1 @ are we done?
+ add r0, r0, #CACHELINESIZE @ advance to next cache line
+ bls iLockLoop
+ mov pc, lr
+
+/*
+ * xscale_icache_unlock
+ */
+ENTRY(xscale_icache_unlock)
+ mcr p15, 0, r0, c9, c1, 1 @ Unlock icache
+ mov pc, lr
+
+/*
+ * xscale_dcache_lock
+ *
+ * r0: starting address to lock
+ * r1: end address to lock
+ */
+ENTRY(xscale_dcache_lock)
+ mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mov r2, #1
+ mcr p15, 0, r2, c9, c2, 0 @ Put dcache in lock mode
+ cpwait ip @ Wait for completion
+
+ mrs r2, cpsr
+ orr r3, r2, #PSR_F_BIT | PSR_I_BIT
+dLockLoop:
+ msr cpsr_c, r3
+ mcr p15, 0, r0, c7, c10, 1 @ Write back line if it is dirty
+ mcr p15, 0, r0, c7, c6, 1 @ Flush/invalidate line
+ msr cpsr_c, r2
+ ldr ip, [r0], #CACHELINESIZE @ Preload 32 bytes into cache from
+ @ location [r0]. Post-increment
+ @ r3 to next cache line
+ cmp r0, r1 @ Are we done?
+ bls dLockLoop
+
+ mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mov r2, #0
+ mcr p15, 0, r2, c9, c2, 0 @ Get out of lock mode
+ cpwait_ret lr, ip
+
+/*
+ * xscale_dcache_unlock
+ */
+ENTRY(xscale_dcache_unlock)
+ mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mcr p15, 0, ip, c9, c2, 1 @ Unlock cache
+ mov pc, lr
+
+/*
+ * Needed to determine the length of the code that needs to be copied.
+ */
+ .align 5
+ENTRY(xscale_cache_dummy)
+ mov pc, lr
+
+/* ================================ TLB LOCKING==============================
+ *
+ * The XScale MicroArchitecture implements support for locking entries into
+ * the Instruction and Data TLBs. The following functions provide the
+ * low level support for supporting these under Linux. xscale-lock.c
+ * implements some higher level management code. Most of the following
+ * is taken straight out of the Developer's Manual.
+ */
+
+/*
+ * Lock I-TLB entry
+ *
+ * r0: Virtual address to translate and lock
+ */
+ .align 5
+ENTRY(xscale_itlb_lock)
+ mrs r2, cpsr
+ orr r3, r2, #PSR_F_BIT | PSR_I_BIT
+ msr cpsr_c, r3 @ Disable interrupts
+ mcr p15, 0, r0, c8, c5, 1 @ Invalidate I-TLB entry
+ mcr p15, 0, r0, c10, c4, 0 @ Translate and lock
+ msr cpsr_c, r2 @ Restore interrupts
+ cpwait_ret lr, ip
+
+/*
+ * Lock D-TLB entry
+ *
+ * r0: Virtual address to translate and lock
+ */
+ .align 5
+ENTRY(xscale_dtlb_lock)
+ mrs r2, cpsr
+ orr r3, r2, #PSR_F_BIT | PSR_I_BIT
+ msr cpsr_c, r3 @ Disable interrupts
+ mcr p15, 0, r0, c8, c6, 1 @ Invalidate D-TLB entry
+ mcr p15, 0, r0, c10, c8, 0 @ Translate and lock
+ msr cpsr_c, r2 @ Restore interrupts
+ cpwait_ret lr, ip
+
+/*
+ * Unlock all I-TLB entries
+ */
+ .align 5
+ENTRY(xscale_itlb_unlock)
+ mcr p15, 0, ip, c10, c4, 1 @ Unlock I-TLB
+ mcr p15, 0, ip, c8, c5, 0 @ Invalidate I-TLB
+ cpwait_ret lr, ip
+
+/*
+ * Unlock all D-TLB entries
+ */
+ENTRY(xscale_dtlb_unlock)
+ mcr p15, 0, ip, c10, c8, 1 @ Unlock D-TBL
+ mcr p15, 0, ip, c8, c6, 0 @ Invalidate D-TLB
+ cpwait_ret lr, ip
+
+/* =============================== PageTable ============================== */
+
+#define PTE_CACHE_WRITE_ALLOCATE 0
+
+/*
+ * cpu_xscale_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+ .align 5
+ENTRY(cpu_xscale_switch_mm)
+ clean_d_cache r1, r2
+ mcr p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB
+ mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ cpwait_ret lr, ip
+
+/*
+ * cpu_xscale_set_pte(ptep, pte)
+ *
+ * Set a PTE and flush it out
+ *
+ * Errata 40: must set memory to write-through for user read-only pages.
+ */
+ .align 5
+ENTRY(cpu_xscale_set_pte)
+ str r1, [r0], #-2048 @ linux version
+
+ bic r2, r1, #0xff0
+ orr r2, r2, #PTE_TYPE_EXT @ extended page
+
+ eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+
+ tst r3, #L_PTE_USER @ User?
+ orrne r2, r2, #PTE_EXT_AP_URO_SRW @ yes -> user r/o, system r/w
+
+ tst r3, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
+ orreq r2, r2, #PTE_EXT_AP_UNO_SRW @ yes -> user n/a, system r/w
+ @ combined with user -> user r/w
+
+ @
+ @ Handle the X bit. We want to set this bit for the minicache
+ @ (U = E = B = W = 0, C = 1) or when write allocate is enabled,
+ @ and we have a writeable, cacheable region. If we ignore the
+ @ U and E bits, we can allow user space to use the minicache as
+ @ well.
+ @
+ @ X = (C & ~W & ~B) | (C & W & B & write_allocate)
+ @
+ eor ip, r1, #L_PTE_CACHEABLE
+ tst ip, #L_PTE_CACHEABLE | L_PTE_WRITE | L_PTE_BUFFERABLE
+#if PTE_CACHE_WRITE_ALLOCATE
+ eorne ip, r1, #L_PTE_CACHEABLE | L_PTE_WRITE | L_PTE_BUFFERABLE
+ tstne ip, #L_PTE_CACHEABLE | L_PTE_WRITE | L_PTE_BUFFERABLE
+#endif
+ orreq r2, r2, #PTE_EXT_TEX(1)
+
+ @
+ @ Erratum 40: The B bit must be cleared for a user read-only
+ @ cacheable page.
+ @
+ @ B = B & ~(U & C & ~W)
+ @
+ and ip, r1, #L_PTE_USER | L_PTE_WRITE | L_PTE_CACHEABLE
+ teq ip, #L_PTE_USER | L_PTE_CACHEABLE
+ biceq r2, r2, #PTE_BUFFERABLE
+
+ tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
+ movne r2, #0 @ no -> fault
+
+ str r2, [r0] @ hardware version
+ mov ip, #0
+ mcr p15, 0, r0, c7, c10, 1 @ Clean D cache line
+ mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mov pc, lr
+
+
+ .ltorg
+
+ .align
+
+ __INIT
+
+ .type __xscale_setup, #function
+__xscale_setup:
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I, D caches & BTB
+ mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I, D TLBs
+#ifdef CONFIG_IWMMXT
+ mov r0, #0 @ initially disallow access to CP0/CP1
+#else
+ mov r0, #1 @ Allow access to CP0
+#endif
+ orr r0, r0, #1 << 6 @ cp6 for IOP3xx and Bulverde
+ orr r0, r0, #1 << 13 @ Its undefined whether this
+ mcr p15, 0, r0, c15, c1, 0 @ affects USR or SVC modes
+ mrc p15, 0, r0, c1, c0, 0 @ get control register
+ ldr r5, xscale_cr1_clear
+ bic r0, r0, r5
+ ldr r5, xscale_cr1_set
+ orr r0, r0, r5
+ mov pc, lr
+ .size __xscale_setup, . - __xscale_setup
+
+ /*
+ * R
+ * .RVI ZFRS BLDP WCAM
+ * ..11 1.01 .... .101
+ *
+ */
+ .type xscale_cr1_clear, #object
+ .type xscale_cr1_set, #object
+xscale_cr1_clear:
+ .word 0x3b07
+xscale_cr1_set:
+ .word 0x3905
+
+ __INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ * come through these
+ */
+
+ .type xscale_processor_functions, #object
+ENTRY(xscale_processor_functions)
+ .word v5t_early_abort
+ .word cpu_xscale_proc_init
+ .word cpu_xscale_proc_fin
+ .word cpu_xscale_reset
+ .word cpu_xscale_do_idle
+ .word cpu_xscale_dcache_clean_area
+ .word cpu_xscale_switch_mm
+ .word cpu_xscale_set_pte
+ .size xscale_processor_functions, . - xscale_processor_functions
+
+ .section ".rodata"
+
+ .type cpu_arch_name, #object
+cpu_arch_name:
+ .asciz "armv5te"
+ .size cpu_arch_name, . - cpu_arch_name
+
+ .type cpu_elf_name, #object
+cpu_elf_name:
+ .asciz "v5"
+ .size cpu_elf_name, . - cpu_elf_name
+
+ .type cpu_80200_name, #object
+cpu_80200_name:
+ .asciz "XScale-80200"
+ .size cpu_80200_name, . - cpu_80200_name
+
+ .type cpu_8032x_name, #object
+cpu_8032x_name:
+ .asciz "XScale-IOP8032x Family"
+ .size cpu_8032x_name, . - cpu_8032x_name
+
+ .type cpu_8033x_name, #object
+cpu_8033x_name:
+ .asciz "XScale-IOP8033x Family"
+ .size cpu_8033x_name, . - cpu_8033x_name
+
+ .type cpu_pxa250_name, #object
+cpu_pxa250_name:
+ .asciz "XScale-PXA250"
+ .size cpu_pxa250_name, . - cpu_pxa250_name
+
+ .type cpu_pxa210_name, #object
+cpu_pxa210_name:
+ .asciz "XScale-PXA210"
+ .size cpu_pxa210_name, . - cpu_pxa210_name
+
+ .type cpu_ixp42x_name, #object
+cpu_ixp42x_name:
+ .asciz "XScale-IXP42x Family"
+ .size cpu_ixp42x_name, . - cpu_ixp42x_name
+
+ .type cpu_ixp46x_name, #object
+cpu_ixp46x_name:
+ .asciz "XScale-IXP46x Family"
+ .size cpu_ixp46x_name, . - cpu_ixp46x_name
+
+ .type cpu_ixp2400_name, #object
+cpu_ixp2400_name:
+ .asciz "XScale-IXP2400"
+ .size cpu_ixp2400_name, . - cpu_ixp2400_name
+
+ .type cpu_ixp2800_name, #object
+cpu_ixp2800_name:
+ .asciz "XScale-IXP2800"
+ .size cpu_ixp2800_name, . - cpu_ixp2800_name
+
+ .type cpu_pxa255_name, #object
+cpu_pxa255_name:
+ .asciz "XScale-PXA255"
+ .size cpu_pxa255_name, . - cpu_pxa255_name
+
+ .type cpu_pxa270_name, #object
+cpu_pxa270_name:
+ .asciz "XScale-PXA270"
+ .size cpu_pxa270_name, . - cpu_pxa270_name
+
+ .align
+
+ .section ".proc.info", #alloc, #execinstr
+
+ .type __80200_proc_info,#object
+__80200_proc_info:
+ .long 0x69052000
+ .long 0xfffffff0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __xscale_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_80200_name
+ .long xscale_processor_functions
+ .long v4wbi_tlb_fns
+ .long xscale_mc_user_fns
+ .long xscale_cache_fns
+ .size __80200_proc_info, . - __80200_proc_info
+
+ .type __8032x_proc_info,#object
+__8032x_proc_info:
+ .long 0x69052420
+ .long 0xfffff5e0 @ mask should accomodate IOP80219 also
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __xscale_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_8032x_name
+ .long xscale_processor_functions
+ .long v4wbi_tlb_fns
+ .long xscale_mc_user_fns
+ .long xscale_cache_fns
+ .size __8032x_proc_info, . - __8032x_proc_info
+
+ .type __8033x_proc_info,#object
+__8033x_proc_info:
+ .long 0x69054010
+ .long 0xffffff30
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __xscale_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_8033x_name
+ .long xscale_processor_functions
+ .long v4wbi_tlb_fns
+ .long xscale_mc_user_fns
+ .long xscale_cache_fns
+ .size __8033x_proc_info, . - __8033x_proc_info
+
+ .type __pxa250_proc_info,#object
+__pxa250_proc_info:
+ .long 0x69052100
+ .long 0xfffff7f0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __xscale_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_pxa250_name
+ .long xscale_processor_functions
+ .long v4wbi_tlb_fns
+ .long xscale_mc_user_fns
+ .long xscale_cache_fns
+ .size __pxa250_proc_info, . - __pxa250_proc_info
+
+ .type __pxa210_proc_info,#object
+__pxa210_proc_info:
+ .long 0x69052120
+ .long 0xfffff3f0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __xscale_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_pxa210_name
+ .long xscale_processor_functions
+ .long v4wbi_tlb_fns
+ .long xscale_mc_user_fns
+ .long xscale_cache_fns
+ .size __pxa210_proc_info, . - __pxa210_proc_info
+
+ .type __ixp2400_proc_info, #object
+__ixp2400_proc_info:
+ .long 0x69054190
+ .long 0xfffffff0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __xscale_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_ixp2400_name
+ .long xscale_processor_functions
+ .long v4wbi_tlb_fns
+ .long xscale_mc_user_fns
+ .long xscale_cache_fns
+ .size __ixp2400_proc_info, . - __ixp2400_proc_info
+
+ .type __ixp2800_proc_info, #object
+__ixp2800_proc_info:
+ .long 0x690541a0
+ .long 0xfffffff0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __xscale_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_ixp2800_name
+ .long xscale_processor_functions
+ .long v4wbi_tlb_fns
+ .long xscale_mc_user_fns
+ .long xscale_cache_fns
+ .size __ixp2800_proc_info, . - __ixp2800_proc_info
+
+ .type __ixp42x_proc_info, #object
+__ixp42x_proc_info:
+ .long 0x690541c0
+ .long 0xffffffc0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __xscale_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_ixp42x_name
+ .long xscale_processor_functions
+ .long v4wbi_tlb_fns
+ .long xscale_mc_user_fns
+ .long xscale_cache_fns
+ .size __ixp42x_proc_info, . - __ixp42x_proc_info
+
+ .type __ixp46x_proc_info, #object
+__ixp46x_proc_info:
+ .long 0x69054200
+ .long 0xffffff00
+ .long 0x00000c0e
+ b __xscale_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_ixp46x_name
+ .long xscale_processor_functions
+ .long v4wbi_tlb_fns
+ .long xscale_mc_user_fns
+ .long xscale_cache_fns
+ .size __ixp46x_proc_info, . - __ixp46x_proc_info
+
+ .type __pxa255_proc_info,#object
+__pxa255_proc_info:
+ .long 0x69052d00
+ .long 0xfffffff0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __xscale_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_pxa255_name
+ .long xscale_processor_functions
+ .long v4wbi_tlb_fns
+ .long xscale_mc_user_fns
+ .long xscale_cache_fns
+ .size __pxa255_proc_info, . - __pxa255_proc_info
+
+ .type __pxa270_proc_info,#object
+__pxa270_proc_info:
+ .long 0x69054110
+ .long 0xfffffff0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __xscale_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_pxa270_name
+ .long xscale_processor_functions
+ .long v4wbi_tlb_fns
+ .long xscale_mc_user_fns
+ .long xscale_cache_fns
+ .size __pxa270_proc_info, . - __pxa270_proc_info
+
diff --git a/arch/arm/mm/tlb-v3.S b/arch/arm/mm/tlb-v3.S
new file mode 100644
index 0000000..44b0dae
--- /dev/null
+++ b/arch/arm/mm/tlb-v3.S
@@ -0,0 +1,52 @@
+/*
+ * linux/arch/arm/mm/tlbv3.S
+ *
+ * Copyright (C) 1997-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * ARM architecture version 3 TLB handling functions.
+ *
+ * Processors: ARM610, ARM710.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/constants.h>
+#include <asm/tlbflush.h>
+#include "proc-macros.S"
+
+ .align 5
+/*
+ * v3_flush_user_tlb_range(start, end, mm)
+ *
+ * Invalidate a range of TLB entries in the specified address space.
+ *
+ * - start - range start address
+ * - end - range end address
+ * - mm - mm_struct describing address space
+ */
+ .align 5
+ENTRY(v3_flush_user_tlb_range)
+ vma_vm_mm r2, r2
+ act_mm r3 @ get current->active_mm
+ teq r2, r3 @ == mm ?
+ movne pc, lr @ no, we dont do anything
+ENTRY(v3_flush_kern_tlb_range)
+ bic r0, r0, #0x0ff
+ bic r0, r0, #0xf00
+1: mcr p15, 0, r0, c6, c0, 0 @ invalidate TLB entry
+ add r0, r0, #PAGE_SZ
+ cmp r0, r1
+ blo 1b
+ mov pc, lr
+
+ __INITDATA
+
+ .type v3_tlb_fns, #object
+ENTRY(v3_tlb_fns)
+ .long v3_flush_user_tlb_range
+ .long v3_flush_kern_tlb_range
+ .long v3_tlb_flags
+ .size v3_tlb_fns, . - v3_tlb_fns
diff --git a/arch/arm/mm/tlb-v4.S b/arch/arm/mm/tlb-v4.S
new file mode 100644
index 0000000..db82ee4
--- /dev/null
+++ b/arch/arm/mm/tlb-v4.S
@@ -0,0 +1,65 @@
+/*
+ * linux/arch/arm/mm/tlbv4.S
+ *
+ * Copyright (C) 1997-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * ARM architecture version 4 TLB handling functions.
+ * These assume a split I/D TLBs, and no write buffer.
+ *
+ * Processors: ARM720T
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/constants.h>
+#include <asm/tlbflush.h>
+#include "proc-macros.S"
+
+ .align 5
+/*
+ * v4_flush_user_tlb_range(start, end, mm)
+ *
+ * Invalidate a range of TLB entries in the specified user address space.
+ *
+ * - start - range start address
+ * - end - range end address
+ * - mm - mm_struct describing address space
+ */
+ .align 5
+ENTRY(v4_flush_user_tlb_range)
+ vma_vm_mm ip, r2
+ act_mm r3 @ get current->active_mm
+ eors r3, ip, r3 @ == mm ?
+ movne pc, lr @ no, we dont do anything
+.v4_flush_kern_tlb_range:
+ bic r0, r0, #0x0ff
+ bic r0, r0, #0xf00
+1: mcr p15, 0, r0, c8, c7, 1 @ invalidate TLB entry
+ add r0, r0, #PAGE_SZ
+ cmp r0, r1
+ blo 1b
+ mov pc, lr
+
+/*
+ * v4_flush_kern_tlb_range(start, end)
+ *
+ * Invalidate a range of TLB entries in the specified kernel
+ * address range.
+ *
+ * - start - virtual address (may not be aligned)
+ * - end - virtual address (may not be aligned)
+ */
+.globl v4_flush_kern_tlb_range
+.equ v4_flush_kern_tlb_range, .v4_flush_kern_tlb_range
+
+ __INITDATA
+
+ .type v4_tlb_fns, #object
+ENTRY(v4_tlb_fns)
+ .long v4_flush_user_tlb_range
+ .long v4_flush_kern_tlb_range
+ .long v4_tlb_flags
+ .size v4_tlb_fns, . - v4_tlb_fns
diff --git a/arch/arm/mm/tlb-v4wb.S b/arch/arm/mm/tlb-v4wb.S
new file mode 100644
index 0000000..7908d5f
--- /dev/null
+++ b/arch/arm/mm/tlb-v4wb.S
@@ -0,0 +1,77 @@
+/*
+ * linux/arch/arm/mm/tlbv4wb.S
+ *
+ * Copyright (C) 1997-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * ARM architecture version 4 TLB handling functions.
+ * These assume a split I/D TLBs w/o I TLB entry, with a write buffer.
+ *
+ * Processors: SA110 SA1100 SA1110
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/constants.h>
+#include <asm/tlbflush.h>
+#include "proc-macros.S"
+
+ .align 5
+/*
+ * v4wb_flush_user_tlb_range(start, end, mm)
+ *
+ * Invalidate a range of TLB entries in the specified address space.
+ *
+ * - start - range start address
+ * - end - range end address
+ * - mm - mm_struct describing address space
+ */
+ .align 5
+ENTRY(v4wb_flush_user_tlb_range)
+ vma_vm_mm ip, r2
+ act_mm r3 @ get current->active_mm
+ eors r3, ip, r3 @ == mm ?
+ movne pc, lr @ no, we dont do anything
+ vma_vm_flags r2, r2
+ mcr p15, 0, r3, c7, c10, 4 @ drain WB
+ tst r2, #VM_EXEC
+ mcrne p15, 0, r3, c8, c5, 0 @ invalidate I TLB
+ bic r0, r0, #0x0ff
+ bic r0, r0, #0xf00
+1: mcr p15, 0, r0, c8, c6, 1 @ invalidate D TLB entry
+ add r0, r0, #PAGE_SZ
+ cmp r0, r1
+ blo 1b
+ mov pc, lr
+
+/*
+ * v4_flush_kern_tlb_range(start, end)
+ *
+ * Invalidate a range of TLB entries in the specified kernel
+ * address range.
+ *
+ * - start - virtual address (may not be aligned)
+ * - end - virtual address (may not be aligned)
+ */
+ENTRY(v4wb_flush_kern_tlb_range)
+ mov r3, #0
+ mcr p15, 0, r3, c7, c10, 4 @ drain WB
+ bic r0, r0, #0x0ff
+ bic r0, r0, #0xf00
+ mcr p15, 0, r3, c8, c5, 0 @ invalidate I TLB
+1: mcr p15, 0, r0, c8, c6, 1 @ invalidate D TLB entry
+ add r0, r0, #PAGE_SZ
+ cmp r0, r1
+ blo 1b
+ mov pc, lr
+
+ __INITDATA
+
+ .type v4wb_tlb_fns, #object
+ENTRY(v4wb_tlb_fns)
+ .long v4wb_flush_user_tlb_range
+ .long v4wb_flush_kern_tlb_range
+ .long v4wb_tlb_flags
+ .size v4wb_tlb_fns, . - v4wb_tlb_fns
diff --git a/arch/arm/mm/tlb-v4wbi.S b/arch/arm/mm/tlb-v4wbi.S
new file mode 100644
index 0000000..efbe94b
--- /dev/null
+++ b/arch/arm/mm/tlb-v4wbi.S
@@ -0,0 +1,68 @@
+/*
+ * linux/arch/arm/mm/tlbv4wbi.S
+ *
+ * Copyright (C) 1997-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * ARM architecture version 4 and version 5 TLB handling functions.
+ * These assume a split I/D TLBs, with a write buffer.
+ *
+ * Processors: ARM920 ARM922 ARM925 ARM926 XScale
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/constants.h>
+#include <asm/tlbflush.h>
+#include "proc-macros.S"
+
+/*
+ * v4wb_flush_user_tlb_range(start, end, mm)
+ *
+ * Invalidate a range of TLB entries in the specified address space.
+ *
+ * - start - range start address
+ * - end - range end address
+ * - mm - mm_struct describing address space
+ */
+ .align 5
+ENTRY(v4wbi_flush_user_tlb_range)
+ vma_vm_mm ip, r2
+ act_mm r3 @ get current->active_mm
+ eors r3, ip, r3 @ == mm ?
+ movne pc, lr @ no, we dont do anything
+ mov r3, #0
+ mcr p15, 0, r3, c7, c10, 4 @ drain WB
+ vma_vm_flags r2, r2
+ bic r0, r0, #0x0ff
+ bic r0, r0, #0xf00
+1: tst r2, #VM_EXEC
+ mcrne p15, 0, r0, c8, c5, 1 @ invalidate I TLB entry
+ mcr p15, 0, r0, c8, c6, 1 @ invalidate D TLB entry
+ add r0, r0, #PAGE_SZ
+ cmp r0, r1
+ blo 1b
+ mov pc, lr
+
+ENTRY(v4wbi_flush_kern_tlb_range)
+ mov r3, #0
+ mcr p15, 0, r3, c7, c10, 4 @ drain WB
+ bic r0, r0, #0x0ff
+ bic r0, r0, #0xf00
+1: mcr p15, 0, r0, c8, c5, 1 @ invalidate I TLB entry
+ mcr p15, 0, r0, c8, c6, 1 @ invalidate D TLB entry
+ add r0, r0, #PAGE_SZ
+ cmp r0, r1
+ blo 1b
+ mov pc, lr
+
+ __INITDATA
+
+ .type v4wbi_tlb_fns, #object
+ENTRY(v4wbi_tlb_fns)
+ .long v4wbi_flush_user_tlb_range
+ .long v4wbi_flush_kern_tlb_range
+ .long v4wbi_tlb_flags
+ .size v4wbi_tlb_fns, . - v4wbi_tlb_fns
diff --git a/arch/arm/mm/tlb-v6.S b/arch/arm/mm/tlb-v6.S
new file mode 100644
index 0000000..99ed26e
--- /dev/null
+++ b/arch/arm/mm/tlb-v6.S
@@ -0,0 +1,92 @@
+/*
+ * linux/arch/arm/mm/tlb-v6.S
+ *
+ * Copyright (C) 1997-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * ARM architecture version 6 TLB handling functions.
+ * These assume a split I/D TLB.
+ */
+#include <linux/linkage.h>
+#include <asm/constants.h>
+#include <asm/page.h>
+#include <asm/tlbflush.h>
+#include "proc-macros.S"
+
+#define HARVARD_TLB
+
+/*
+ * v6wbi_flush_user_tlb_range(start, end, vma)
+ *
+ * Invalidate a range of TLB entries in the specified address space.
+ *
+ * - start - start address (may not be aligned)
+ * - end - end address (exclusive, may not be aligned)
+ * - vma - vma_struct describing address range
+ *
+ * It is assumed that:
+ * - the "Invalidate single entry" instruction will invalidate
+ * both the I and the D TLBs on Harvard-style TLBs
+ */
+ENTRY(v6wbi_flush_user_tlb_range)
+ vma_vm_mm r3, r2 @ get vma->vm_mm
+ mov ip, #0
+ mmid r3, r3 @ get vm_mm->context.id
+ mcr p15, 0, ip, c7, c10, 4 @ drain write buffer
+ mov r0, r0, lsr #PAGE_SHIFT @ align address
+ mov r1, r1, lsr #PAGE_SHIFT
+ asid r3, r3 @ mask ASID
+ orr r0, r3, r0, lsl #PAGE_SHIFT @ Create initial MVA
+ mov r1, r1, lsl #PAGE_SHIFT
+ vma_vm_flags r2, r2 @ get vma->vm_flags
+1:
+#ifdef HARVARD_TLB
+ mcr p15, 0, r0, c8, c6, 1 @ TLB invalidate D MVA (was 1)
+ tst r2, #VM_EXEC @ Executable area ?
+ mcrne p15, 0, r0, c8, c5, 1 @ TLB invalidate I MVA (was 1)
+#else
+ mcr p15, 0, r0, c8, c7, 1 @ TLB invalidate MVA (was 1)
+#endif
+ add r0, r0, #PAGE_SZ
+ cmp r0, r1
+ blo 1b
+ mov pc, lr
+
+/*
+ * v6wbi_flush_kern_tlb_range(start,end)
+ *
+ * Invalidate a range of kernel TLB entries
+ *
+ * - start - start address (may not be aligned)
+ * - end - end address (exclusive, may not be aligned)
+ */
+ENTRY(v6wbi_flush_kern_tlb_range)
+ mov r2, #0
+ mcr p15, 0, r2, c7, c10, 4 @ drain write buffer
+ mov r0, r0, lsr #PAGE_SHIFT @ align address
+ mov r1, r1, lsr #PAGE_SHIFT
+ mov r0, r0, lsl #PAGE_SHIFT
+ mov r1, r1, lsl #PAGE_SHIFT
+1:
+#ifdef HARVARD_TLB
+ mcr p15, 0, r0, c8, c6, 1 @ TLB invalidate D MVA
+ mcr p15, 0, r0, c8, c5, 1 @ TLB invalidate I MVA
+#else
+ mcr p15, 0, r0, c8, c7, 1 @ TLB invalidate MVA
+#endif
+ add r0, r0, #PAGE_SZ
+ cmp r0, r1
+ blo 1b
+ mov pc, lr
+
+ .section ".text.init", #alloc, #execinstr
+
+ .type v6wbi_tlb_fns, #object
+ENTRY(v6wbi_tlb_fns)
+ .long v6wbi_flush_user_tlb_range
+ .long v6wbi_flush_kern_tlb_range
+ .long v6wbi_tlb_flags
+ .size v6wbi_tlb_fns, . - v6wbi_tlb_fns