Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c
new file mode 100644
index 0000000..e371ed5
--- /dev/null
+++ b/arch/mips/lasat/setup.c
@@ -0,0 +1,192 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999 MIPS Technologies, Inc. All rights reserved.
+ *
+ * Thomas Horsten <thh@lasat.com>
+ * Copyright (C) 2000 LASAT Networks A/S.
+ *
+ * Brian Murphy <brian@murphy.dk>
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Lasat specific setup.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+
+#include <asm/time.h>
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/serial.h>
+#include <asm/lasat/lasat.h>
+#include <asm/lasat/serial.h>
+
+#ifdef CONFIG_PICVUE
+#include <linux/notifier.h>
+#endif
+
+#include "ds1603.h"
+#include <asm/lasat/ds1603.h>
+#include <asm/lasat/picvue.h>
+#include <asm/lasat/eeprom.h>
+
+#include "prom.h"
+
+int lasat_command_line = 0;
+void lasatint_init(void);
+
+extern void lasat_reboot_setup(void);
+extern void pcisetup(void);
+extern void edhac_init(void *, void *, void *);
+extern void addrflt_init(void);
+
+struct lasat_misc lasat_misc_info[N_MACHTYPES] = {
+ {(void *)KSEG1ADDR(0x1c840000), (void *)KSEG1ADDR(0x1c800000), 2},
+ {(void *)KSEG1ADDR(0x11080000), (void *)KSEG1ADDR(0x11000000), 6}
+};
+
+struct lasat_misc *lasat_misc = NULL;
+
+#ifdef CONFIG_DS1603
+static struct ds_defs ds_defs[N_MACHTYPES] = {
+ { (void *)DS1603_REG_100, (void *)DS1603_REG_100,
+ DS1603_RST_100, DS1603_CLK_100, DS1603_DATA_100,
+ DS1603_DATA_SHIFT_100, 0, 0 },
+ { (void *)DS1603_REG_200, (void *)DS1603_DATA_REG_200,
+ DS1603_RST_200, DS1603_CLK_200, DS1603_DATA_200,
+ DS1603_DATA_READ_SHIFT_200, 1, 2000 }
+};
+#endif
+
+#ifdef CONFIG_PICVUE
+#include "picvue.h"
+static struct pvc_defs pvc_defs[N_MACHTYPES] = {
+ { (void *)PVC_REG_100, PVC_DATA_SHIFT_100, PVC_DATA_M_100,
+ PVC_E_100, PVC_RW_100, PVC_RS_100 },
+ { (void *)PVC_REG_200, PVC_DATA_SHIFT_200, PVC_DATA_M_200,
+ PVC_E_200, PVC_RW_200, PVC_RS_200 }
+};
+#endif
+
+static int lasat_panic_display(struct notifier_block *this,
+ unsigned long event, void *ptr)
+{
+#ifdef CONFIG_PICVUE
+ unsigned char *string = ptr;
+ if (string == NULL)
+ string = "Kernel Panic";
+ pvc_dump_string(string);
+#endif
+ return NOTIFY_DONE;
+}
+
+static int lasat_panic_prom_monitor(struct notifier_block *this,
+ unsigned long event, void *ptr)
+{
+ prom_monitor();
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block lasat_panic_block[] =
+{
+ { lasat_panic_display, NULL, INT_MAX },
+ { lasat_panic_prom_monitor, NULL, INT_MIN }
+};
+
+static void lasat_time_init(void)
+{
+ mips_hpt_frequency = lasat_board_info.li_cpu_hz / 2;
+}
+
+static void lasat_timer_setup(struct irqaction *irq)
+{
+
+ write_c0_compare(
+ read_c0_count() +
+ mips_hpt_frequency / HZ);
+ change_c0_status(ST0_IM, IE_IRQ0 | IE_IRQ5);
+}
+
+#define DYNAMIC_SERIAL_INIT
+#ifdef DYNAMIC_SERIAL_INIT
+void __init serial_init(void)
+{
+#ifdef CONFIG_SERIAL_8250
+ struct uart_port s;
+
+ memset(&s, 0, sizeof(s));
+
+ s.flags = STD_COM_FLAGS;
+ s.iotype = SERIAL_IO_MEM;
+
+ if (mips_machtype == MACH_LASAT_100) {
+ s.uartclk = LASAT_BASE_BAUD_100 * 16;
+ s.irq = LASATINT_UART_100;
+ s.regshift = LASAT_UART_REGS_SHIFT_100;
+ s.membase = (char *)KSEG1ADDR(LASAT_UART_REGS_BASE_100);
+ } else {
+ s.uartclk = LASAT_BASE_BAUD_200 * 16;
+ s.irq = LASATINT_UART_200;
+ s.regshift = LASAT_UART_REGS_SHIFT_200;
+ s.membase = (char *)KSEG1ADDR(LASAT_UART_REGS_BASE_200);
+ }
+
+ if (early_serial_setup(&s) != 0)
+ printk(KERN_ERR "Serial setup failed!\n");
+#endif
+}
+#endif
+
+static int __init lasat_setup(void)
+{
+ int i;
+ lasat_misc = &lasat_misc_info[mips_machtype];
+#ifdef CONFIG_PICVUE
+ picvue = &pvc_defs[mips_machtype];
+#endif
+
+ /* Set up panic notifier */
+ for (i = 0; i < sizeof(lasat_panic_block) / sizeof(struct notifier_block); i++)
+ notifier_chain_register(&panic_notifier_list, &lasat_panic_block[i]);
+
+ lasat_reboot_setup();
+
+ board_time_init = lasat_time_init;
+ board_timer_setup = lasat_timer_setup;
+
+#ifdef CONFIG_DS1603
+ ds1603 = &ds_defs[mips_machtype];
+ rtc_get_time = ds1603_read;
+ rtc_set_time = ds1603_set;
+#endif
+
+#ifdef DYNAMIC_SERIAL_INIT
+ serial_init();
+#endif
+ /* Switch from prom exception handler to normal mode */
+ change_c0_status(ST0_BEV,0);
+
+ prom_printf("Lasat specific initialization complete\n");
+
+ return 0;
+}
+
+early_initcall(lasat_setup);