Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/x86_64/mm/srat.c b/arch/x86_64/mm/srat.c
new file mode 100644
index 0000000..5d01b31
--- /dev/null
+++ b/arch/x86_64/mm/srat.c
@@ -0,0 +1,217 @@
+/*
+ * ACPI 3.0 based NUMA setup
+ * Copyright 2004 Andi Kleen, SuSE Labs.
+ *
+ * Reads the ACPI SRAT table to figure out what memory belongs to which CPUs.
+ *
+ * Called from acpi_numa_init while reading the SRAT and SLIT tables.
+ * Assumes all memory regions belonging to a single proximity domain
+ * are in one chunk. Holes between them will be included in the node.
+ */
+
+#include <linux/kernel.h>
+#include <linux/acpi.h>
+#include <linux/mmzone.h>
+#include <linux/bitmap.h>
+#include <linux/module.h>
+#include <linux/topology.h>
+#include <asm/proto.h>
+#include <asm/numa.h>
+
+static struct acpi_table_slit *acpi_slit;
+
+static nodemask_t nodes_parsed __initdata;
+static nodemask_t nodes_found __initdata;
+static struct node nodes[MAX_NUMNODES] __initdata;
+static __u8 pxm2node[256] = { [0 ... 255] = 0xff };
+
+static __init int setup_node(int pxm)
+{
+ unsigned node = pxm2node[pxm];
+ if (node == 0xff) {
+ if (nodes_weight(nodes_found) >= MAX_NUMNODES)
+ return -1;
+ node = first_unset_node(nodes_found);
+ node_set(node, nodes_found);
+ pxm2node[pxm] = node;
+ }
+ return pxm2node[pxm];
+}
+
+static __init int conflicting_nodes(unsigned long start, unsigned long end)
+{
+ int i;
+ for_each_online_node(i) {
+ struct node *nd = &nodes[i];
+ if (nd->start == nd->end)
+ continue;
+ if (nd->end > start && nd->start < end)
+ return 1;
+ if (nd->end == end && nd->start == start)
+ return 1;
+ }
+ return -1;
+}
+
+static __init void cutoff_node(int i, unsigned long start, unsigned long end)
+{
+ struct node *nd = &nodes[i];
+ if (nd->start < start) {
+ nd->start = start;
+ if (nd->end < nd->start)
+ nd->start = nd->end;
+ }
+ if (nd->end > end) {
+ if (!(end & 0xfff))
+ end--;
+ nd->end = end;
+ if (nd->start > nd->end)
+ nd->start = nd->end;
+ }
+}
+
+static __init void bad_srat(void)
+{
+ printk(KERN_ERR "SRAT: SRAT not used.\n");
+ acpi_numa = -1;
+}
+
+static __init inline int srat_disabled(void)
+{
+ return numa_off || acpi_numa < 0;
+}
+
+/* Callback for SLIT parsing */
+void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
+{
+ acpi_slit = slit;
+}
+
+/* Callback for Proximity Domain -> LAPIC mapping */
+void __init
+acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa)
+{
+ int pxm, node;
+ if (srat_disabled() || pa->flags.enabled == 0)
+ return;
+ pxm = pa->proximity_domain;
+ node = setup_node(pxm);
+ if (node < 0) {
+ printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm);
+ bad_srat();
+ return;
+ }
+ if (pa->apic_id >= NR_CPUS) {
+ printk(KERN_ERR "SRAT: lapic %u too large.\n",
+ pa->apic_id);
+ bad_srat();
+ return;
+ }
+ cpu_to_node[pa->apic_id] = node;
+ acpi_numa = 1;
+ printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n",
+ pxm, pa->apic_id, node);
+}
+
+/* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
+void __init
+acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma)
+{
+ struct node *nd;
+ unsigned long start, end;
+ int node, pxm;
+ int i;
+
+ if (srat_disabled() || ma->flags.enabled == 0)
+ return;
+ /* hotplug bit is ignored for now */
+ pxm = ma->proximity_domain;
+ node = setup_node(pxm);
+ if (node < 0) {
+ printk(KERN_ERR "SRAT: Too many proximity domains.\n");
+ bad_srat();
+ return;
+ }
+ start = ma->base_addr_lo | ((u64)ma->base_addr_hi << 32);
+ end = start + (ma->length_lo | ((u64)ma->length_hi << 32));
+ i = conflicting_nodes(start, end);
+ if (i >= 0) {
+ printk(KERN_ERR
+ "SRAT: pxm %d overlap %lx-%lx with node %d(%Lx-%Lx)\n",
+ pxm, start, end, i, nodes[i].start, nodes[i].end);
+ bad_srat();
+ return;
+ }
+ nd = &nodes[node];
+ if (!node_test_and_set(node, nodes_parsed)) {
+ nd->start = start;
+ nd->end = end;
+ } else {
+ if (start < nd->start)
+ nd->start = start;
+ if (nd->end < end)
+ nd->end = end;
+ }
+ if (!(nd->end & 0xfff))
+ nd->end--;
+ printk(KERN_INFO "SRAT: Node %u PXM %u %Lx-%Lx\n", node, pxm,
+ nd->start, nd->end);
+}
+
+void __init acpi_numa_arch_fixup(void) {}
+
+/* Use the information discovered above to actually set up the nodes. */
+int __init acpi_scan_nodes(unsigned long start, unsigned long end)
+{
+ int i;
+ if (acpi_numa <= 0)
+ return -1;
+ memnode_shift = compute_hash_shift(nodes, nodes_weight(nodes_parsed));
+ if (memnode_shift < 0) {
+ printk(KERN_ERR
+ "SRAT: No NUMA node hash function found. Contact maintainer\n");
+ bad_srat();
+ return -1;
+ }
+ for (i = 0; i < MAX_NUMNODES; i++) {
+ if (!node_isset(i, nodes_parsed))
+ continue;
+ cutoff_node(i, start, end);
+ if (nodes[i].start == nodes[i].end) {
+ node_clear(i, nodes_parsed);
+ continue;
+ }
+ setup_node_bootmem(i, nodes[i].start, nodes[i].end);
+ }
+ for (i = 0; i < NR_CPUS; i++) {
+ if (cpu_to_node[i] == NUMA_NO_NODE)
+ continue;
+ if (!node_isset(cpu_to_node[i], nodes_parsed))
+ cpu_to_node[i] = NUMA_NO_NODE;
+ }
+ numa_init_array();
+ return 0;
+}
+
+int node_to_pxm(int n)
+{
+ int i;
+ if (pxm2node[n] == n)
+ return n;
+ for (i = 0; i < 256; i++)
+ if (pxm2node[i] == n)
+ return i;
+ return 0;
+}
+
+int __node_distance(int a, int b)
+{
+ int index;
+
+ if (!acpi_slit)
+ return a == b ? 10 : 20;
+ index = acpi_slit->localities * node_to_pxm(a);
+ return acpi_slit->entry[index + node_to_pxm(b)];
+}
+
+EXPORT_SYMBOL(__node_distance);