Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/cdrom/mcdx.h b/drivers/cdrom/mcdx.h
new file mode 100644
index 0000000..83c364a
--- /dev/null
+++ b/drivers/cdrom/mcdx.h
@@ -0,0 +1,185 @@
+/*
+ * Definitions for the Mitsumi CDROM interface
+ * Copyright (C) 1995 1996 Heiko Schlittermann <heiko@lotte.sax.de>
+ * VERSION: @VERSION@
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Thanks to
+ * The Linux Community at all and ...
+ * Martin Harris (he wrote the first Mitsumi Driver)
+ * Eberhard Moenkeberg (he gave me much support and the initial kick)
+ * Bernd Huebner, Ruediger Helsch (Unifix-Software Gmbh, they
+ * improved the original driver)
+ * Jon Tombs, Bjorn Ekwall (module support)
+ * Daniel v. Mosnenck (he sent me the Technical and Programming Reference)
+ * Gerd Knorr (he lent me his PhotoCD)
+ * Nils Faerber and Roger E. Wolff (extensively tested the LU portion)
+ * Andreas Kies (testing the mysterious hang up's)
+ * ... somebody forgotten?
+ * Marcin Dalecki
+ *
+ */
+
+/*
+ * The following lines are for user configuration
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * {0|1} -- 1 if you want the driver detect your drive, may crash and
+ * needs a long time to seek. The higher the address the longer the
+ * seek.
+ *
+ * WARNING: AUTOPROBE doesn't work.
+ */
+#define MCDX_AUTOPROBE 0
+
+/*
+ * Drive specific settings according to the jumpers on the controller
+ * board(s).
+ * o MCDX_NDRIVES : number of used entries of the following table
+ * o MCDX_DRIVEMAP : table of {i/o base, irq} per controller
+ *
+ * NOTE: I didn't get a drive at irq 9(2) working. Not even alone.
+ */
+#if MCDX_AUTOPROBE == 0
+ #define MCDX_NDRIVES 1
+ #define MCDX_DRIVEMAP { \
+ {0x300, 11}, \
+ {0x304, 05}, \
+ {0x000, 00}, \
+ {0x000, 00}, \
+ {0x000, 00}, \
+ }
+#else
+ #error Autoprobing is not implemented yet.
+#endif
+
+#ifndef MCDX_QUIET
+#define MCDX_QUIET 1
+#endif
+
+#ifndef MCDX_DEBUG
+#define MCDX_DEBUG 0
+#endif
+
+/* *** make the following line uncommented, if you're sure,
+ * *** all configuration is done */
+/* #define I_WAS_HERE */
+
+/* The name of the device */
+#define MCDX "mcdx"
+
+/* Flags for DEBUGGING */
+#define INIT 0
+#define MALLOC 0
+#define IOCTL 0
+#define PLAYTRK 0
+#define SUBCHNL 0
+#define TOCHDR 0
+#define MS 0
+#define PLAYMSF 0
+#define READTOC 0
+#define OPENCLOSE 0
+#define HW 0
+#define TALK 0
+#define IRQ 0
+#define XFER 0
+#define REQUEST 0
+#define SLEEP 0
+
+/* The following addresses are taken from the Mitsumi Reference
+ * and describe the possible i/o range for the controller.
+ */
+#define MCDX_IO_BEGIN ((char*) 0x300) /* first base of i/o addr */
+#define MCDX_IO_END ((char*) 0x3fc) /* last base of i/o addr */
+
+/* Per controller 4 bytes i/o are needed. */
+#define MCDX_IO_SIZE 4
+
+/*
+ * Bits
+ */
+
+/* The status byte, returned from every command, set if
+ * the description is true */
+#define MCDX_RBIT_OPEN 0x80 /* door is open */
+#define MCDX_RBIT_DISKSET 0x40 /* disk set (recognised) */
+#define MCDX_RBIT_CHANGED 0x20 /* disk was changed */
+#define MCDX_RBIT_CHECK 0x10 /* disk rotates, servo is on */
+#define MCDX_RBIT_AUDIOTR 0x08 /* current track is audio */
+#define MCDX_RBIT_RDERR 0x04 /* read error, refer SENSE KEY */
+#define MCDX_RBIT_AUDIOBS 0x02 /* currently playing audio */
+#define MCDX_RBIT_CMDERR 0x01 /* command, param or format error */
+
+/* The I/O Register holding the h/w status of the drive,
+ * can be read at i/o base + 1 */
+#define MCDX_RBIT_DOOR 0x10 /* door is open */
+#define MCDX_RBIT_STEN 0x04 /* if 0, i/o base contains drive status */
+#define MCDX_RBIT_DTEN 0x02 /* if 0, i/o base contains data */
+
+/*
+ * The commands.
+ */
+
+#define OPCODE 1 /* offset of opcode */
+#define MCDX_CMD_REQUEST_TOC 1, 0x10
+#define MCDX_CMD_REQUEST_STATUS 1, 0x40
+#define MCDX_CMD_RESET 1, 0x60
+#define MCDX_CMD_REQUEST_DRIVE_MODE 1, 0xc2
+#define MCDX_CMD_SET_INTERLEAVE 2, 0xc8, 0
+#define MCDX_CMD_DATAMODE_SET 2, 0xa0, 0
+ #define MCDX_DATAMODE1 0x01
+ #define MCDX_DATAMODE2 0x02
+#define MCDX_CMD_LOCK_DOOR 2, 0xfe, 0
+
+#define READ_AHEAD 4 /* 8 Sectors (4K) */
+
+/* Useful macros */
+#define e_door(x) ((x) & MCDX_RBIT_OPEN)
+#define e_check(x) (~(x) & MCDX_RBIT_CHECK)
+#define e_notset(x) (~(x) & MCDX_RBIT_DISKSET)
+#define e_changed(x) ((x) & MCDX_RBIT_CHANGED)
+#define e_audio(x) ((x) & MCDX_RBIT_AUDIOTR)
+#define e_audiobusy(x) ((x) & MCDX_RBIT_AUDIOBS)
+#define e_cmderr(x) ((x) & MCDX_RBIT_CMDERR)
+#define e_readerr(x) ((x) & MCDX_RBIT_RDERR)
+
+/** no drive specific */
+#define MCDX_CDBLK 2048 /* 2048 cooked data each blk */
+
+#define MCDX_DATA_TIMEOUT (HZ/10) /* 0.1 second */
+
+/*
+ * Access to the msf array
+ */
+#define MSF_MIN 0 /* minute */
+#define MSF_SEC 1 /* second */
+#define MSF_FRM 2 /* frame */
+
+/*
+ * Errors
+ */
+#define MCDX_E 1 /* unspec error */
+#define MCDX_ST_EOM 0x0100 /* end of media */
+#define MCDX_ST_DRV 0x00ff /* mask to query the drive status */
+
+#ifndef I_WAS_HERE
+#ifndef MODULE
+#warning You have not edited mcdx.h
+#warning Perhaps irq and i/o settings are wrong.
+#endif
+#endif
+
+/* ex:set ts=4 sw=4: */