Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/char/ftape/lowlevel/ftape-format.c b/drivers/char/ftape/lowlevel/ftape-format.c
new file mode 100644
index 0000000..5dd4c59
--- /dev/null
+++ b/drivers/char/ftape/lowlevel/ftape-format.c
@@ -0,0 +1,344 @@
+/*
+ * Copyright (C) 1997 Claus-Justus Heine.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ *
+ * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-format.c,v $
+ * $Revision: 1.2.4.1 $
+ * $Date: 1997/11/14 16:05:39 $
+ *
+ * This file contains the code to support formatting of floppy
+ * tape cartridges with the QIC-40/80/3010/3020 floppy-tape
+ * driver "ftape" for Linux.
+ */
+
+#include <linux/string.h>
+#include <linux/errno.h>
+
+#include <linux/ftape.h>
+#include <linux/qic117.h>
+#include "../lowlevel/ftape-tracing.h"
+#include "../lowlevel/ftape-io.h"
+#include "../lowlevel/ftape-ctl.h"
+#include "../lowlevel/ftape-rw.h"
+#include "../lowlevel/ftape-ecc.h"
+#include "../lowlevel/ftape-bsm.h"
+#include "../lowlevel/ftape-format.h"
+
+#if defined(TESTING)
+#define FT_FMT_SEGS_PER_BUF 50
+#else
+#define FT_FMT_SEGS_PER_BUF (FT_BUFF_SIZE/(4*FT_SECTORS_PER_SEGMENT))
+#endif
+
+static spinlock_t ftape_format_lock;
+
+/*
+ * first segment of the new buffer
+ */
+static int switch_segment;
+
+/*
+ * at most 256 segments fit into one 32 kb buffer. Even TR-1 cartridges have
+ * more than this many segments per track, so better be careful.
+ *
+ * buffer_struct *buff: buffer to store the formatting coordinates in
+ * int start: starting segment for this buffer.
+ * int spt: segments per track
+ *
+ * Note: segment ids are relative to the start of the track here.
+ */
+static void setup_format_buffer(buffer_struct *buff, int start, int spt,
+ __u8 gap3)
+{
+ int to_do = spt - start;
+ TRACE_FUN(ft_t_flow);
+
+ if (to_do > FT_FMT_SEGS_PER_BUF) {
+ to_do = FT_FMT_SEGS_PER_BUF;
+ }
+ buff->ptr = buff->address;
+ buff->remaining = to_do * FT_SECTORS_PER_SEGMENT; /* # sectors */
+ buff->bytes = buff->remaining * 4; /* need 4 bytes per sector */
+ buff->gap3 = gap3;
+ buff->segment_id = start;
+ buff->next_segment = start + to_do;
+ if (buff->next_segment >= spt) {
+ buff->next_segment = 0; /* 0 means: stop runner */
+ }
+ buff->status = waiting; /* tells the isr that it can use
+ * this buffer
+ */
+ TRACE_EXIT;
+}
+
+
+/*
+ * start formatting a new track.
+ */
+int ftape_format_track(const unsigned int track, const __u8 gap3)
+{
+ unsigned long flags;
+ buffer_struct *tail, *head;
+ int status;
+ TRACE_FUN(ft_t_flow);
+
+ TRACE_CATCH(ftape_ready_wait(ftape_timeout.pause, &status),);
+ if (track & 1) {
+ if (!(status & QIC_STATUS_AT_EOT)) {
+ TRACE_CATCH(ftape_seek_to_eot(),);
+ }
+ } else {
+ if (!(status & QIC_STATUS_AT_BOT)) {
+ TRACE_CATCH(ftape_seek_to_bot(),);
+ }
+ }
+ ftape_abort_operation(); /* this sets ft_head = ft_tail = 0 */
+ ftape_set_state(formatting);
+
+ TRACE(ft_t_noise,
+ "Formatting track %d, logical: from segment %d to %d",
+ track, track * ft_segments_per_track,
+ (track + 1) * ft_segments_per_track - 1);
+
+ /*
+ * initialize the buffer switching protocol for this track
+ */
+ head = ftape_get_buffer(ft_queue_head); /* tape isn't running yet */
+ tail = ftape_get_buffer(ft_queue_tail); /* tape isn't running yet */
+ switch_segment = 0;
+ do {
+ FT_SIGNAL_EXIT(_DONT_BLOCK);
+ setup_format_buffer(tail, switch_segment,
+ ft_segments_per_track, gap3);
+ switch_segment = tail->next_segment;
+ } while ((switch_segment != 0) &&
+ ((tail = ftape_next_buffer(ft_queue_tail)) != head));
+ /* go */
+ head->status = formatting;
+ TRACE_CATCH(ftape_seek_head_to_track(track),);
+ TRACE_CATCH(ftape_command(QIC_LOGICAL_FORWARD),);
+ spin_lock_irqsave(&ftape_format_lock, flags);
+ TRACE_CATCH(fdc_setup_formatting(head), restore_flags(flags));
+ spin_unlock_irqrestore(&ftape_format_lock, flags);
+ TRACE_EXIT 0;
+}
+
+/* return segment id of segment currently being formatted and do the
+ * buffer switching stuff.
+ */
+int ftape_format_status(unsigned int *segment_id)
+{
+ buffer_struct *tail = ftape_get_buffer(ft_queue_tail);
+ int result;
+ TRACE_FUN(ft_t_flow);
+
+ while (switch_segment != 0 &&
+ ftape_get_buffer(ft_queue_head) != tail) {
+ FT_SIGNAL_EXIT(_DONT_BLOCK);
+ /* need more buffers, first wait for empty buffer
+ */
+ TRACE_CATCH(ftape_wait_segment(formatting),);
+ /* don't worry for gap3. If we ever hit this piece of code,
+ * then all buffer already have the correct gap3 set!
+ */
+ setup_format_buffer(tail, switch_segment,
+ ft_segments_per_track, tail->gap3);
+ switch_segment = tail->next_segment;
+ if (switch_segment != 0) {
+ tail = ftape_next_buffer(ft_queue_tail);
+ }
+ }
+ /* should runner stop ?
+ */
+ if (ft_runner_status == aborting || ft_runner_status == do_abort) {
+ buffer_struct *head = ftape_get_buffer(ft_queue_head);
+ TRACE(ft_t_warn, "Error formatting segment %d",
+ ftape_get_buffer(ft_queue_head)->segment_id);
+ (void)ftape_abort_operation();
+ TRACE_EXIT (head->status != error) ? -EAGAIN : -EIO;
+ }
+ /*
+ * don't care if the timer expires, this is just kind of a
+ * "select" operation that lets the calling process sleep
+ * until something has happened
+ */
+ if (fdc_interrupt_wait(5 * FT_SECOND) < 0) {
+ TRACE(ft_t_noise, "End of track %d at segment %d",
+ ft_location.track,
+ ftape_get_buffer(ft_queue_head)->segment_id);
+ result = 1; /* end of track, unlock module */
+ } else {
+ result = 0;
+ }
+ /*
+ * the calling process should use the seg id to determine
+ * which parts of the dma buffers can be safely overwritten
+ * with new data.
+ */
+ *segment_id = ftape_get_buffer(ft_queue_head)->segment_id;
+ /*
+ * Internally we start counting segment ids from the start of
+ * each track when formatting, but externally we keep them
+ * relative to the start of the tape:
+ */
+ *segment_id += ft_location.track * ft_segments_per_track;
+ TRACE_EXIT result;
+}
+
+/*
+ * The segment id is relative to the start of the tape
+ */
+int ftape_verify_segment(const unsigned int segment_id, SectorMap *bsm)
+{
+ int result;
+ int verify_done = 0;
+ TRACE_FUN(ft_t_flow);
+
+ TRACE(ft_t_noise, "Verifying segment %d", segment_id);
+
+ if (ft_driver_state != verifying) {
+ TRACE(ft_t_noise, "calling ftape_abort_operation");
+ if (ftape_abort_operation() < 0) {
+ TRACE(ft_t_err, "ftape_abort_operation failed");
+ TRACE_EXIT -EIO;
+ }
+ }
+ *bsm = 0x00000000;
+ ftape_set_state(verifying);
+ for (;;) {
+ buffer_struct *tail;
+ /*
+ * Allow escape from this loop on signal
+ */
+ FT_SIGNAL_EXIT(_DONT_BLOCK);
+ /*
+ * Search all full buffers for the first matching the
+ * wanted segment. Clear other buffers on the fly.
+ */
+ tail = ftape_get_buffer(ft_queue_tail);
+ while (!verify_done && tail->status == done) {
+ /*
+ * Allow escape from this loop on signal !
+ */
+ FT_SIGNAL_EXIT(_DONT_BLOCK);
+ if (tail->segment_id == segment_id) {
+ /* If out buffer is already full,
+ * return its contents.
+ */
+ TRACE(ft_t_flow, "found segment in cache: %d",
+ segment_id);
+ if ((tail->soft_error_map |
+ tail->hard_error_map) != 0) {
+ TRACE(ft_t_info,"bsm[%d] = 0x%08lx",
+ segment_id,
+ (unsigned long)
+ (tail->soft_error_map |
+ tail->hard_error_map));
+ *bsm = (tail->soft_error_map |
+ tail->hard_error_map);
+ }
+ verify_done = 1;
+ } else {
+ TRACE(ft_t_flow,"zapping segment in cache: %d",
+ tail->segment_id);
+ }
+ tail->status = waiting;
+ tail = ftape_next_buffer(ft_queue_tail);
+ }
+ if (!verify_done && tail->status == verifying) {
+ if (tail->segment_id == segment_id) {
+ switch(ftape_wait_segment(verifying)) {
+ case 0:
+ break;
+ case -EINTR:
+ TRACE_ABORT(-EINTR, ft_t_warn,
+ "interrupted by "
+ "non-blockable signal");
+ break;
+ default:
+ ftape_abort_operation();
+ ftape_set_state(verifying);
+ /* be picky */
+ TRACE_ABORT(-EIO, ft_t_warn,
+ "wait_segment failed");
+ }
+ } else {
+ /* We're reading the wrong segment,
+ * stop runner.
+ */
+ TRACE(ft_t_noise, "verifying wrong segment");
+ ftape_abort_operation();
+ ftape_set_state(verifying);
+ }
+ }
+ /* should runner stop ?
+ */
+ if (ft_runner_status == aborting) {
+ buffer_struct *head = ftape_get_buffer(ft_queue_head);
+ if (head->status == error ||
+ head->status == verifying) {
+ /* no data or overrun error */
+ head->status = waiting;
+ }
+ TRACE_CATCH(ftape_dumb_stop(),);
+ } else {
+ /* If just passed last segment on tape: wait
+ * for BOT or EOT mark. Sets ft_runner_status to
+ * idle if at lEOT and successful
+ */
+ TRACE_CATCH(ftape_handle_logical_eot(),);
+ }
+ if (verify_done) {
+ TRACE_EXIT 0;
+ }
+ /* Now at least one buffer is idle!
+ * Restart runner & tape if needed.
+ */
+ /* We could optimize the following a little bit. We know that
+ * the bad sector map is empty.
+ */
+ tail = ftape_get_buffer(ft_queue_tail);
+ if (tail->status == waiting) {
+ buffer_struct *head = ftape_get_buffer(ft_queue_head);
+
+ ftape_setup_new_segment(head, segment_id, -1);
+ ftape_calc_next_cluster(head);
+ if (ft_runner_status == idle) {
+ result = ftape_start_tape(segment_id,
+ head->sector_offset);
+ switch(result) {
+ case 0:
+ break;
+ case -ETIME:
+ case -EINTR:
+ TRACE_ABORT(result, ft_t_err, "Error: "
+ "segment %d unreachable",
+ segment_id);
+ break;
+ default:
+ *bsm = EMPTY_SEGMENT;
+ TRACE_EXIT 0;
+ break;
+ }
+ }
+ head->status = verifying;
+ fdc_setup_read_write(head, FDC_VERIFY);
+ }
+ }
+ /* not reached */
+ TRACE_EXIT -EIO;
+}