Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
diff --git a/drivers/char/rio/riointr.c b/drivers/char/rio/riointr.c
new file mode 100644
index 0000000..e42e7b5
--- /dev/null
+++ b/drivers/char/rio/riointr.c
@@ -0,0 +1,951 @@
+/*
+** -----------------------------------------------------------------------------
+**
+**  Perle Specialix driver for Linux
+**  Ported from existing RIO Driver for SCO sources.
+ *
+ *  (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
+ *
+ *      This program is free software; you can redistribute it and/or modify
+ *      it under the terms of the GNU General Public License as published by
+ *      the Free Software Foundation; either version 2 of the License, or
+ *      (at your option) any later version.
+ *
+ *      This program is distributed in the hope that it will be useful,
+ *      but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *      GNU General Public License for more details.
+ *
+ *      You should have received a copy of the GNU General Public License
+ *      along with this program; if not, write to the Free Software
+ *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+**
+**	Module		: riointr.c
+**	SID		: 1.2
+**	Last Modified	: 11/6/98 10:33:44
+**	Retrieved	: 11/6/98 10:33:49
+**
+**  ident @(#)riointr.c	1.2
+**
+** -----------------------------------------------------------------------------
+*/
+#ifdef SCCS_LABELS
+static char *_riointr_c_sccs_ = "@(#)riointr.c	1.2";
+#endif
+
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/tty.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/string.h>
+#include <asm/semaphore.h>
+#include <asm/uaccess.h>
+
+#include <linux/termios.h>
+#include <linux/serial.h>
+
+#include <linux/generic_serial.h>
+
+#include <linux/delay.h>
+
+#include "linux_compat.h"
+#include "rio_linux.h"
+#include "typdef.h"
+#include "pkt.h"
+#include "daemon.h"
+#include "rio.h"
+#include "riospace.h"
+#include "top.h"
+#include "cmdpkt.h"
+#include "map.h"
+#include "riotypes.h"
+#include "rup.h"
+#include "port.h"
+#include "riodrvr.h"
+#include "rioinfo.h"
+#include "func.h"
+#include "errors.h"
+#include "pci.h"
+
+#include "parmmap.h"
+#include "unixrup.h"
+#include "board.h"
+#include "host.h"
+#include "error.h"
+#include "phb.h"
+#include "link.h"
+#include "cmdblk.h"
+#include "route.h"
+#include "control.h"
+#include "cirrus.h"
+#include "rioioctl.h"
+
+
+static void RIOReceive(struct rio_info *, struct Port *);
+
+
+static char *firstchars (char *p, int nch)
+{
+  static char buf[2][128];
+  static int t=0;
+  t = ! t;
+  memcpy (buf[t], p, nch);
+  buf[t][nch] = 0;
+  return buf[t];
+}
+
+
+#define	INCR( P, I )	((P) = (((P)+(I)) & p->RIOBufferMask))
+/* Enable and start the transmission of packets */
+void
+RIOTxEnable(en)
+char *		en;
+{
+  struct Port *	PortP;
+  struct rio_info *p;
+  struct tty_struct* tty;
+  int c;
+  struct PKT *	PacketP;
+  unsigned long flags;
+
+  PortP = (struct Port *)en; 
+  p = (struct rio_info *)PortP->p;
+  tty = PortP->gs.tty;
+
+
+  rio_dprintk (RIO_DEBUG_INTR, "tx port %d: %d chars queued.\n", 
+	      PortP->PortNum, PortP->gs.xmit_cnt);
+
+  if (!PortP->gs.xmit_cnt) return;
+  
+
+  /* This routine is an order of magnitude simpler than the specialix
+     version. One of the disadvantages is that this version will send
+     an incomplete packet (usually 64 bytes instead of 72) once for
+     every 4k worth of data. Let's just say that this won't influence
+     performance significantly..... */
+
+  rio_spin_lock_irqsave(&PortP->portSem, flags);
+
+  while (can_add_transmit( &PacketP, PortP )) {
+    c = PortP->gs.xmit_cnt;
+    if (c > PKT_MAX_DATA_LEN) c = PKT_MAX_DATA_LEN;
+
+    /* Don't copy past the end of the source buffer */
+    if (c > SERIAL_XMIT_SIZE - PortP->gs.xmit_tail) 
+      c = SERIAL_XMIT_SIZE - PortP->gs.xmit_tail;
+
+    { int t;
+    t = (c > 10)?10:c;
+    
+    rio_dprintk (RIO_DEBUG_INTR, "rio: tx port %d: copying %d chars: %s - %s\n", 
+		 PortP->PortNum, c, 
+		 firstchars (PortP->gs.xmit_buf + PortP->gs.xmit_tail      , t),
+		 firstchars (PortP->gs.xmit_buf + PortP->gs.xmit_tail + c-t, t));
+    }
+    /* If for one reason or another, we can't copy more data, 
+       we're done! */
+    if (c == 0) break;
+
+    rio_memcpy_toio (PortP->HostP->Caddr, (caddr_t)PacketP->data, 
+		 PortP->gs.xmit_buf + PortP->gs.xmit_tail, c);
+    /*    udelay (1); */
+
+    writeb (c, &(PacketP->len));
+    if (!( PortP->State & RIO_DELETED ) ) {
+      add_transmit ( PortP );
+      /*
+      ** Count chars tx'd for port statistics reporting
+      */
+      if ( PortP->statsGather )
+	PortP->txchars += c;
+    }
+    PortP->gs.xmit_tail = (PortP->gs.xmit_tail + c) & (SERIAL_XMIT_SIZE-1);
+    PortP->gs.xmit_cnt -= c;
+  }
+
+  rio_spin_unlock_irqrestore(&PortP->portSem, flags);
+
+  if (PortP->gs.xmit_cnt <= (PortP->gs.wakeup_chars + 2*PKT_MAX_DATA_LEN)) {
+    rio_dprintk (RIO_DEBUG_INTR, "Waking up.... ldisc:%d (%d/%d)....",
+		 (int)(PortP->gs.tty->flags & (1 << TTY_DO_WRITE_WAKEUP)),
+		 PortP->gs.wakeup_chars, PortP->gs.xmit_cnt); 
+    if ((PortP->gs.tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
+	PortP->gs.tty->ldisc.write_wakeup)
+      (PortP->gs.tty->ldisc.write_wakeup)(PortP->gs.tty);
+    rio_dprintk (RIO_DEBUG_INTR, "(%d/%d)\n",
+		PortP->gs.wakeup_chars, PortP->gs.xmit_cnt); 
+    wake_up_interruptible(&PortP->gs.tty->write_wait);
+  }
+
+}
+
+
+/*
+** RIO Host Service routine. Does all the work traditionally associated with an
+** interrupt.
+*/
+static int	RupIntr;
+static int	RxIntr;
+static int	TxIntr;
+void
+RIOServiceHost(p, HostP, From)
+struct rio_info *	p;
+struct Host *HostP;
+int From; 
+{
+  rio_spin_lock (&HostP->HostLock);
+  if ( (HostP->Flags & RUN_STATE) != RC_RUNNING ) { 
+    static int t =0;
+    rio_spin_unlock (&HostP->HostLock); 
+    if ((t++ % 200) == 0)
+      rio_dprintk (RIO_DEBUG_INTR, "Interrupt but host not running. flags=%x.\n", (int)HostP->Flags);
+    return;
+  }
+  rio_spin_unlock (&HostP->HostLock); 
+
+  if ( RWORD( HostP->ParmMapP->rup_intr ) ) {
+    WWORD( HostP->ParmMapP->rup_intr , 0 );
+    p->RIORupCount++;
+    RupIntr++;
+    rio_dprintk (RIO_DEBUG_INTR, "rio: RUP interrupt on host %d\n", HostP-p->RIOHosts);
+    RIOPollHostCommands(p, HostP );
+  }
+
+  if ( RWORD( HostP->ParmMapP->rx_intr ) ) {
+    int port;
+
+    WWORD( HostP->ParmMapP->rx_intr , 0 );
+    p->RIORxCount++;
+    RxIntr++;
+
+    rio_dprintk (RIO_DEBUG_INTR, "rio: RX interrupt on host %d\n", HostP-p->RIOHosts);
+    /*
+    ** Loop through every port. If the port is mapped into
+    ** the system ( i.e. has /dev/ttyXXXX associated ) then it is
+    ** worth checking. If the port isn't open, grab any packets
+    ** hanging on its receive queue and stuff them on the free
+    ** list; check for commands on the way.
+    */
+    for ( port=p->RIOFirstPortsBooted; 
+	  port<p->RIOLastPortsBooted+PORTS_PER_RTA; port++ ) {
+      struct Port *PortP = p->RIOPortp[port];
+      struct tty_struct *ttyP;
+      struct PKT *PacketP;
+		
+      /*
+      ** not mapped in - most of the RIOPortp[] information
+      ** has not been set up!
+      ** Optimise: ports come in bundles of eight.
+      */
+      if ( !PortP->Mapped ) {
+	port += 7;
+	continue; /* with the next port */
+      }
+
+      /*
+      ** If the host board isn't THIS host board, check the next one.
+      ** optimise: ports come in bundles of eight.
+      */
+      if ( PortP->HostP != HostP ) {
+	port += 7;
+	continue;
+      }
+
+      /*
+      ** Let us see - is the port open? If not, then don't service it.
+      */
+      if ( !( PortP->PortState & PORT_ISOPEN ) ) {
+	continue;
+      }
+
+      /*
+      ** find corresponding tty structure. The process of mapping
+      ** the ports puts these here.
+      */
+      ttyP = PortP->gs.tty;
+
+      /*
+      ** Lock the port before we begin working on it.
+      */
+      rio_spin_lock(&PortP->portSem);
+
+      /*
+      ** Process received data if there is any.
+      */
+      if ( can_remove_receive( &PacketP, PortP ) )
+	RIOReceive(p, PortP);
+
+      /*
+      ** If there is no data left to be read from the port, and
+      ** it's handshake bit is set, then we must clear the handshake,
+      ** so that that downstream RTA is re-enabled.
+      */
+      if ( !can_remove_receive( &PacketP, PortP ) && 
+	   ( RWORD( PortP->PhbP->handshake )==PHB_HANDSHAKE_SET ) ) {
+				/*
+				** MAGIC! ( Basically, handshake the RX buffer, so that
+				** the RTAs upstream can be re-enabled. )
+				*/
+	rio_dprintk (RIO_DEBUG_INTR, "Set RX handshake bit\n");
+	WWORD( PortP->PhbP->handshake, 
+	       PHB_HANDSHAKE_SET|PHB_HANDSHAKE_RESET );
+      }
+      rio_spin_unlock(&PortP->portSem);
+    }
+  }
+
+  if ( RWORD( HostP->ParmMapP->tx_intr ) ) {
+    int port;
+
+    WWORD( HostP->ParmMapP->tx_intr , 0);
+
+    p->RIOTxCount++;
+    TxIntr++;
+    rio_dprintk (RIO_DEBUG_INTR, "rio: TX interrupt on host %d\n", HostP-p->RIOHosts);
+
+    /*
+    ** Loop through every port.
+    ** If the port is mapped into the system ( i.e. has /dev/ttyXXXX
+    ** associated ) then it is worth checking.
+    */
+    for ( port=p->RIOFirstPortsBooted; 
+	  port<p->RIOLastPortsBooted+PORTS_PER_RTA; port++ ) {
+      struct Port *PortP = p->RIOPortp[port];
+      struct tty_struct *ttyP;
+      struct PKT *PacketP;
+
+      /*
+      ** not mapped in - most of the RIOPortp[] information
+      ** has not been set up!
+      */
+      if ( !PortP->Mapped ) {
+	port += 7;
+	continue; /* with the next port */
+      }
+
+      /*
+      ** If the host board isn't running, then its data structures
+      ** are no use to us - continue quietly.
+      */
+      if ( PortP->HostP != HostP ) {
+	port += 7;
+	continue; /* with the next port */
+      }
+
+      /*
+      ** Let us see - is the port open? If not, then don't service it.
+      */
+      if ( !( PortP->PortState & PORT_ISOPEN ) ) {
+	continue;
+      }
+
+      rio_dprintk (RIO_DEBUG_INTR, "rio: Looking into port %d.\n", port);
+      /*
+      ** Lock the port before we begin working on it.
+      */
+      rio_spin_lock(&PortP->portSem);
+
+      /*
+      ** If we can't add anything to the transmit queue, then
+      ** we need do none of this processing.
+      */
+      if ( !can_add_transmit( &PacketP, PortP ) ) {
+	rio_dprintk (RIO_DEBUG_INTR, "Can't add to port, so skipping.\n");
+	rio_spin_unlock(&PortP->portSem);
+	continue;
+      }
+
+      /*
+      ** find corresponding tty structure. The process of mapping
+      ** the ports puts these here.
+      */
+      ttyP = PortP->gs.tty;
+      /* If ttyP is NULL, the port is getting closed. Forget about it. */
+      if (!ttyP) {
+	rio_dprintk (RIO_DEBUG_INTR, "no tty, so skipping.\n");
+	rio_spin_unlock(&PortP->portSem);
+	continue;
+      }
+      /*
+      ** If there is more room available we start up the transmit
+      ** data process again. This can be direct I/O, if the cookmode
+      ** is set to COOK_RAW or COOK_MEDIUM, or will be a call to the
+      ** riotproc( T_OUTPUT ) if we are in COOK_WELL mode, to fetch
+      ** characters via the line discipline. We must always call
+      ** the line discipline,
+      ** so that user input characters can be echoed correctly.
+      **
+      ** ++++ Update +++++
+      ** With the advent of double buffering, we now see if
+      ** TxBufferOut-In is non-zero. If so, then we copy a packet
+      ** to the output place, and set it going. If this empties
+      ** the buffer, then we must issue a wakeup( ) on OUT.
+      ** If it frees space in the buffer then we must issue
+      ** a wakeup( ) on IN.
+      **
+      ** ++++ Extra! Extra! If PortP->WflushFlag is set, then we
+      ** have to send a WFLUSH command down the PHB, to mark the
+      ** end point of a WFLUSH. We also need to clear out any
+      ** data from the double buffer! ( note that WflushFlag is a
+      ** *count* of the number of WFLUSH commands outstanding! )
+      **
+      ** ++++ And there's more!
+      ** If an RTA is powered off, then on again, and rebooted,
+      ** whilst it has ports open, then we need to re-open the ports.
+      ** ( reasonable enough ). We can't do this when we spot the
+      ** re-boot, in interrupt time, because the queue is probably
+      ** full. So, when we come in here, we need to test if any
+      ** ports are in this condition, and re-open the port before
+      ** we try to send any more data to it. Now, the re-booted
+      ** RTA will be discarding packets from the PHB until it
+      ** receives this open packet, but don't worry tooo much
+      ** about that. The one thing that is interesting is the
+      ** combination of this effect and the WFLUSH effect!
+      */
+      /* For now don't handle RTA reboots. -- REW. 
+	 Reenabled. Otherwise RTA reboots didn't work. Duh. -- REW */
+      if ( PortP->MagicFlags ) {
+#if 1
+	if ( PortP->MagicFlags & MAGIC_REBOOT ) {
+	  /*
+	  ** well, the RTA has been rebooted, and there is room
+	  ** on its queue to add the open packet that is required.
+	  **
+	  ** The messy part of this line is trying to decide if
+	  ** we need to call the Param function as a tty or as
+	  ** a modem.
+	  ** DONT USE CLOCAL AS A TEST FOR THIS!
+	  **
+	  ** If we can't param the port, then move on to the
+	  ** next port.
+	  */
+	  PortP->InUse = NOT_INUSE;
+
+	  rio_spin_unlock(&PortP->portSem);
+	  if ( RIOParam(PortP, OPEN, ((PortP->Cor2Copy & 
+				       (COR2_RTSFLOW|COR2_CTSFLOW ) )== 
+				      (COR2_RTSFLOW|COR2_CTSFLOW ) ) ? 
+			TRUE : FALSE, DONT_SLEEP ) == RIO_FAIL ) {
+	    continue; /* with next port */
+	  }
+	  rio_spin_lock(&PortP->portSem);
+	  PortP->MagicFlags &= ~MAGIC_REBOOT;
+	}
+#endif
+
+	/*
+	** As mentioned above, this is a tacky hack to cope
+	** with WFLUSH
+	*/
+	if ( PortP->WflushFlag ) {
+	  rio_dprintk (RIO_DEBUG_INTR, "Want to WFLUSH mark this port\n");
+
+	  if ( PortP->InUse )
+	    rio_dprintk (RIO_DEBUG_INTR, "FAILS - PORT IS IN USE\n");
+	}
+				
+	while ( PortP->WflushFlag &&
+		can_add_transmit( &PacketP, PortP ) && 
+		( PortP->InUse == NOT_INUSE ) ) {
+	  int p;
+	  struct PktCmd *PktCmdP;
+
+	  rio_dprintk (RIO_DEBUG_INTR, "Add WFLUSH marker to data queue\n");
+	  /*
+	  ** make it look just like a WFLUSH command
+	  */
+	  PktCmdP = ( struct PktCmd * )&PacketP->data[0];
+
+	  WBYTE( PktCmdP->Command , WFLUSH );
+
+	  p =  PortP->HostPort % ( ushort )PORTS_PER_RTA;
+
+	  /*
+	  ** If second block of ports for 16 port RTA, add 8
+	  ** to index 8-15.
+	  */
+	  if ( PortP->SecondBlock )
+	    p += PORTS_PER_RTA;
+
+	  WBYTE( PktCmdP->PhbNum, p );
+
+	  /*
+	  ** to make debuggery easier
+	  */
+	  WBYTE( PacketP->data[ 2], 'W'  );
+	  WBYTE( PacketP->data[ 3], 'F'  );
+	  WBYTE( PacketP->data[ 4], 'L'  );
+	  WBYTE( PacketP->data[ 5], 'U'  );
+	  WBYTE( PacketP->data[ 6], 'S'  );
+	  WBYTE( PacketP->data[ 7], 'H'  );
+	  WBYTE( PacketP->data[ 8], ' '  );
+	  WBYTE( PacketP->data[ 9], '0'+PortP->WflushFlag );
+	  WBYTE( PacketP->data[10], ' '  );
+	  WBYTE( PacketP->data[11], ' '  );
+	  WBYTE( PacketP->data[12], '\0' );
+
+	  /*
+	  ** its two bytes long!
+	  */
+	  WBYTE( PacketP->len , PKT_CMD_BIT | 2 );
+
+	  /*
+	  ** queue it!
+	  */
+	  if ( !( PortP->State & RIO_DELETED ) ) {
+	    add_transmit( PortP );
+	    /*
+	    ** Count chars tx'd for port statistics reporting
+	    */
+	    if ( PortP->statsGather )
+	      PortP->txchars += 2;
+	  }
+
+	  if ( --( PortP->WflushFlag ) == 0 ) {
+	    PortP->MagicFlags &= ~MAGIC_FLUSH;
+	  }
+
+	  rio_dprintk (RIO_DEBUG_INTR, "Wflush count now stands at %d\n", 
+		 PortP->WflushFlag);
+	}
+	if ( PortP->MagicFlags & MORE_OUTPUT_EYGOR ) {
+	  if ( PortP->MagicFlags & MAGIC_FLUSH ) {
+	    PortP->MagicFlags |= MORE_OUTPUT_EYGOR;
+	  }
+	  else {
+	    if ( !can_add_transmit( &PacketP, PortP ) ) {
+	      rio_spin_unlock(&PortP->portSem);
+	      continue;
+	    }
+	    rio_spin_unlock(&PortP->portSem);
+	    RIOTxEnable((char *)PortP);
+	    rio_spin_lock(&PortP->portSem);
+	    PortP->MagicFlags &= ~MORE_OUTPUT_EYGOR;
+	  }
+	}
+      }
+
+
+      /*
+      ** If we can't add anything to the transmit queue, then
+      ** we need do none of the remaining processing.
+      */
+      if (!can_add_transmit( &PacketP, PortP ) ) {
+	rio_spin_unlock(&PortP->portSem);
+	continue;
+      }
+
+      rio_spin_unlock(&PortP->portSem);
+      RIOTxEnable((char *)PortP);
+    }
+  }
+}
+
+/*
+** Routine for handling received data for clist drivers.
+** NB: Called with the tty locked. The spl from the lockb( ) is passed.
+** we return the ttySpl level that we re-locked at.
+*/
+static void
+RIOReceive(p, PortP)
+struct rio_info *	p;
+struct Port *		PortP;
+{
+  struct tty_struct *TtyP;
+  register ushort transCount;
+  struct PKT *PacketP;
+  register uint	DataCnt;
+  uchar *	ptr;
+  int copied =0;
+
+  static int intCount, RxIntCnt;
+
+  /*
+  ** The receive data process is to remove packets from the
+  ** PHB until there aren't any more or the current cblock
+  ** is full. When this occurs, there will be some left over
+  ** data in the packet, that we must do something with.
+  ** As we haven't unhooked the packet from the read list
+  ** yet, we can just leave the packet there, having first
+  ** made a note of how far we got. This means that we need
+  ** a pointer per port saying where we start taking the
+  ** data from - this will normally be zero, but when we
+  ** run out of space it will be set to the offset of the
+  ** next byte to copy from the packet data area. The packet
+  ** length field is decremented by the number of bytes that
+  ** we succesfully removed from the packet. When this reaches
+  ** zero, we reset the offset pointer to be zero, and free
+  ** the packet from the front of the queue.
+  */
+
+  intCount++;
+
+  TtyP = PortP->gs.tty;
+  if (!TtyP) {
+    rio_dprintk (RIO_DEBUG_INTR, "RIOReceive: tty is null. \n");
+    return;
+  }
+
+  if (PortP->State & RIO_THROTTLE_RX) {
+    rio_dprintk (RIO_DEBUG_INTR, "RIOReceive: Throttled. Can't handle more input.\n");
+    return;
+  }
+
+  if ( PortP->State & RIO_DELETED )
+    {
+      while ( can_remove_receive( &PacketP, PortP ) )
+	{
+	  remove_receive( PortP );
+	  put_free_end( PortP->HostP, PacketP );
+	}
+    }
+  else
+    {
+      /*
+      ** loop, just so long as:
+      **   i ) there's some data ( i.e. can_remove_receive )
+      **  ii ) we haven't been blocked
+      ** iii ) there's somewhere to put the data
+      **  iv ) we haven't outstayed our welcome
+      */
+      transCount = 1;
+      while ( can_remove_receive(&PacketP, PortP)
+	      && transCount)
+	{
+#ifdef STATS
+	  PortP->Stat.RxIntCnt++;
+#endif /* STATS */
+	  RxIntCnt++;
+
+	  /*
+	  ** check that it is not a command!
+	  */
+	  if ( PacketP->len & PKT_CMD_BIT ) {
+	    rio_dprintk (RIO_DEBUG_INTR, "RIO: unexpected command packet received on PHB\n");
+	    /*	    rio_dprint(RIO_DEBUG_INTR, (" sysport   = %d\n", p->RIOPortp->PortNum)); */
+	    rio_dprintk (RIO_DEBUG_INTR, " dest_unit = %d\n", PacketP->dest_unit);
+	    rio_dprintk (RIO_DEBUG_INTR, " dest_port = %d\n", PacketP->dest_port);
+	    rio_dprintk (RIO_DEBUG_INTR, " src_unit  = %d\n", PacketP->src_unit);
+	    rio_dprintk (RIO_DEBUG_INTR, " src_port  = %d\n", PacketP->src_port);
+	    rio_dprintk (RIO_DEBUG_INTR, " len	   = %d\n", PacketP->len);
+	    rio_dprintk (RIO_DEBUG_INTR, " control   = %d\n", PacketP->control);
+	    rio_dprintk (RIO_DEBUG_INTR, " csum	   = %d\n", PacketP->csum);
+	    rio_dprintk (RIO_DEBUG_INTR, "	 data bytes: ");
+	    for ( DataCnt=0; DataCnt<PKT_MAX_DATA_LEN; DataCnt++ )
+	      rio_dprintk (RIO_DEBUG_INTR, "%d\n", PacketP->data[DataCnt]);
+	    remove_receive( PortP );
+	    put_free_end( PortP->HostP, PacketP );
+	    continue; /* with next packet */
+	  }
+
+	  /*
+	  ** How many characters can we move 'upstream' ?
+	  **
+	  ** Determine the minimum of the amount of data
+	  ** available and the amount of space in which to
+	  ** put it.
+	  **
+	  ** 1.	Get the packet length by masking 'len'
+	  **	for only the length bits.
+	  ** 2.	Available space is [buffer size] - [space used]
+	  **
+	  ** Transfer count is the minimum of packet length
+	  ** and available space.
+	  */
+			
+	  transCount = min_t(unsigned int, PacketP->len & PKT_LEN_MASK,
+			   TTY_FLIPBUF_SIZE - TtyP->flip.count);
+	  rio_dprintk (RIO_DEBUG_REC,  "port %d: Copy %d bytes\n", 
+				      PortP->PortNum, transCount);
+	  /*
+	  ** To use the following 'kkprintfs' for debugging - change the '#undef'
+	  ** to '#define', (this is the only place ___DEBUG_IT___ occurs in the
+	  ** driver).
+	  */
+#undef ___DEBUG_IT___
+#ifdef ___DEBUG_IT___
+	  kkprintf("I:%d R:%d P:%d Q:%d C:%d F:%x ",
+		   intCount,
+		   RxIntCnt,
+		   PortP->PortNum,
+		   TtyP->rxqueue.count,
+		   transCount,
+		   TtyP->flags );
+#endif
+	  ptr = (uchar *) PacketP->data + PortP->RxDataStart;
+
+	  rio_memcpy_fromio (TtyP->flip.char_buf_ptr, ptr, transCount);
+	  memset(TtyP->flip.flag_buf_ptr, TTY_NORMAL, transCount);
+
+#ifdef STATS
+	  /*
+	  ** keep a count for statistical purposes
+	  */
+	  PortP->Stat.RxCharCnt	+= transCount;
+#endif
+	  PortP->RxDataStart	+= transCount;
+	  PacketP->len		-= transCount;
+	  copied += transCount;
+	  TtyP->flip.count += transCount;
+	  TtyP->flip.char_buf_ptr += transCount;
+	  TtyP->flip.flag_buf_ptr += transCount;
+
+
+#ifdef ___DEBUG_IT___
+	  kkprintf("T:%d L:%d\n", DataCnt, PacketP->len );
+#endif
+
+	  if ( PacketP->len == 0 )
+	    {
+				/*
+				** If we have emptied the packet, then we can
+				** free it, and reset the start pointer for
+				** the next packet.
+				*/
+	      remove_receive( PortP );
+	      put_free_end( PortP->HostP, PacketP );
+	      PortP->RxDataStart = 0;
+#ifdef STATS
+				/*
+				** more lies ( oops, I mean statistics )
+				*/
+	      PortP->Stat.RxPktCnt++;
+#endif /* STATS */
+	    }
+	}
+    }
+  if (copied) {
+    rio_dprintk (RIO_DEBUG_REC, "port %d: pushing tty flip buffer: %d total bytes copied.\n", PortP->PortNum, copied);
+    tty_flip_buffer_push (TtyP);
+  }
+
+  return;
+}
+
+#ifdef FUTURE_RELEASE
+/*
+** The proc routine called by the line discipline to do the work for it.
+** The proc routine works hand in hand with the interrupt routine.
+*/
+int
+riotproc(p, tp, cmd, port)
+struct rio_info *	p;
+register struct ttystatics *tp;
+int cmd;
+int	port;
+{
+	register struct Port *PortP;
+	int SysPort;
+	struct PKT *PacketP;
+
+	SysPort = port;	/* Believe me, it works. */
+
+	if ( SysPort < 0 || SysPort >= RIO_PORTS ) {
+		rio_dprintk (RIO_DEBUG_INTR, "Illegal port %d derived from TTY in riotproc()\n",SysPort);
+		return 0;
+	}
+	PortP = p->RIOPortp[SysPort];
+
+	if ((uint)PortP->PhbP < (uint)PortP->Caddr || 
+			(uint)PortP->PhbP >= (uint)PortP->Caddr+SIXTY_FOUR_K ) {
+		rio_dprintk (RIO_DEBUG_INTR, "RIO: NULL or BAD PhbP on sys port %d in proc routine\n",
+							SysPort);
+		rio_dprintk (RIO_DEBUG_INTR, "	 PortP = 0x%x\n",PortP);
+		rio_dprintk (RIO_DEBUG_INTR, "	 PortP->PhbP = 0x%x\n",PortP->PhbP);
+		rio_dprintk (RIO_DEBUG_INTR, "	 PortP->Caddr = 0x%x\n",PortP->PhbP);
+		rio_dprintk (RIO_DEBUG_INTR, "	 PortP->HostPort = 0x%x\n",PortP->HostPort);
+		return 0;
+	}
+
+	switch(cmd) {
+		case T_WFLUSH:
+			rio_dprintk (RIO_DEBUG_INTR, "T_WFLUSH\n");
+			/*
+			** Because of the spooky way the RIO works, we don't need
+			** to issue a flush command on any of the SET*F commands,
+			** as that causes trouble with getty and login, which issue
+			** these commands to incur a READ flush, and rely on the fact
+			** that the line discipline does a wait for drain for them.
+			** As the rio doesn't wait for drain, the write flush would
+			** destroy the Password: prompt. This isn't very friendly, so
+			** here we only issue a WFLUSH command if we are in the interrupt
+			** routine, or we aren't executing a SET*F command.
+			*/
+			if ( PortP->HostP->InIntr || !PortP->FlushCmdBodge ) {
+				/*
+				** form a wflush packet - 1 byte long, no data
+				*/
+				if ( PortP->State & RIO_DELETED ) {
+					rio_dprintk (RIO_DEBUG_INTR, "WFLUSH on deleted RTA\n");
+				}
+				else {
+					if ( RIOPreemptiveCmd(p, PortP, WFLUSH ) == RIO_FAIL ) {
+						rio_dprintk (RIO_DEBUG_INTR, "T_WFLUSH Command failed\n");
+					}
+					else
+						rio_dprintk (RIO_DEBUG_INTR, "T_WFLUSH Command\n");
+				}
+				/*
+				** WFLUSH operation - flush the data!
+				*/
+				PortP->TxBufferIn = PortP->TxBufferOut = 0;
+			}
+			else {
+				rio_dprintk (RIO_DEBUG_INTR, "T_WFLUSH Command ignored\n");
+			}
+			/*
+			** sort out the line discipline
+			*/
+			if (PortP->CookMode == COOK_WELL)
+				goto start;
+			break;
+	
+		case T_RESUME:
+			rio_dprintk (RIO_DEBUG_INTR, "T_RESUME\n");
+			/*
+			** send pre-emptive resume packet
+			*/
+			if ( PortP->State & RIO_DELETED ) {
+				rio_dprintk (RIO_DEBUG_INTR, "RESUME on deleted RTA\n");
+			}
+			else {
+				if ( RIOPreemptiveCmd(p, PortP, RESUME ) == RIO_FAIL ) {
+					rio_dprintk (RIO_DEBUG_INTR, "T_RESUME Command failed\n");
+				}
+			}
+			/*
+			** and re-start the sender software!
+			*/
+			if (PortP->CookMode == COOK_WELL)
+				goto start;
+			break;
+	
+		case T_TIME:
+			rio_dprintk (RIO_DEBUG_INTR, "T_TIME\n");
+			/*
+			** T_TIME is called when xDLY is set in oflags and
+			** the line discipline timeout has expired. It's
+			** function in life is to clear the TIMEOUT flag
+			** and to re-start output to the port.
+			*/
+			/*
+			** Fall through and re-start output
+			*/
+		case T_OUTPUT:
+start:
+			if ( PortP->MagicFlags & MAGIC_FLUSH ) {
+				PortP->MagicFlags |= MORE_OUTPUT_EYGOR;
+				return 0;
+			}
+			RIOTxEnable((char *)PortP);
+			PortP->MagicFlags &= ~MORE_OUTPUT_EYGOR;
+			/*rio_dprint(RIO_DEBUG_INTR, PortP,DBG_PROC,"T_OUTPUT finished\n");*/
+			break;
+	
+		case T_SUSPEND:
+			rio_dprintk (RIO_DEBUG_INTR, "T_SUSPEND\n");
+			/*
+			** send a suspend pre-emptive packet.
+			*/
+			if ( PortP->State & RIO_DELETED ) {
+				rio_dprintk (RIO_DEBUG_INTR, "SUSPEND deleted RTA\n");
+			}
+			else {
+				if ( RIOPreemptiveCmd(p, PortP, SUSPEND ) == RIO_FAIL ) {
+					rio_dprintk (RIO_DEBUG_INTR, "T_SUSPEND Command failed\n");
+				}
+			}
+			/*
+			** done!
+			*/
+			break;
+	
+		case T_BLOCK:
+			rio_dprintk (RIO_DEBUG_INTR, "T_BLOCK\n");
+			break;
+	
+		case T_RFLUSH:
+			rio_dprintk (RIO_DEBUG_INTR, "T_RFLUSH\n");
+			if ( PortP->State & RIO_DELETED ) {
+				rio_dprintk (RIO_DEBUG_INTR, "RFLUSH on deleted RTA\n");
+				PortP->RxDataStart = 0;
+			}
+			else {
+				if ( RIOPreemptiveCmd( p, PortP, RFLUSH ) == RIO_FAIL ) {
+					rio_dprintk (RIO_DEBUG_INTR, "T_RFLUSH Command failed\n");
+					return 0;
+				}
+				PortP->RxDataStart = 0;
+				while ( can_remove_receive(&PacketP, PortP) ) {
+					remove_receive(PortP);
+					ShowPacket(DBG_PROC, PacketP );
+					put_free_end(PortP->HostP, PacketP );
+				}
+				if ( PortP->PhbP->handshake == PHB_HANDSHAKE_SET ) {
+					/*
+					** MAGIC!
+					*/
+					rio_dprintk (RIO_DEBUG_INTR, "Set receive handshake bit\n");
+					PortP->PhbP->handshake |= PHB_HANDSHAKE_RESET;
+				}
+			}
+			break;
+			/* FALLTHROUGH */
+		case T_UNBLOCK:
+			rio_dprintk (RIO_DEBUG_INTR, "T_UNBLOCK\n");
+			/*
+			** If there is any data to receive set a timeout to service it.
+			*/
+			RIOReceive(p, PortP);
+			break;
+	
+		case T_BREAK:
+			rio_dprintk (RIO_DEBUG_INTR, "T_BREAK\n");
+			/*
+			** Send a break command. For Sys V
+			** this is a timed break, so we
+			** send a SBREAK[time] packet
+			*/
+			/*
+			** Build a BREAK command
+			*/
+			if ( PortP->State & RIO_DELETED ) {
+				rio_dprintk (RIO_DEBUG_INTR, "BREAK on deleted RTA\n");
+			}
+			else {
+				if (RIOShortCommand(PortP,SBREAK,2,
+								p->RIOConf.BreakInterval)==RIO_FAIL) {
+			   		rio_dprintk (RIO_DEBUG_INTR, "SBREAK RIOShortCommand failed\n");
+				}
+			}
+	
+			/*
+			** done!
+			*/
+			break;
+	
+		case T_INPUT:
+			rio_dprintk (RIO_DEBUG_INTR, "Proc T_INPUT called - I don't know what to do!\n");
+			break;
+		case T_PARM:
+			rio_dprintk (RIO_DEBUG_INTR, "Proc T_PARM called - I don't know what to do!\n");
+			break;
+	
+		case T_SWTCH:
+			rio_dprintk (RIO_DEBUG_INTR, "Proc T_SWTCH called - I don't know what to do!\n");
+			break;
+	
+		default:
+			rio_dprintk (RIO_DEBUG_INTR, "Proc UNKNOWN command %d\n",cmd);
+	}
+	/*
+	** T_OUTPUT returns without passing through this point!
+	*/
+	/*rio_dprint(RIO_DEBUG_INTR, PortP,DBG_PROC,"riotproc done\n");*/
+	return(0);
+}
+#endif