Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
new file mode 100644
index 0000000..5b29c3b
--- /dev/null
+++ b/drivers/firmware/Kconfig
@@ -0,0 +1,61 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+menu "Firmware Drivers"
+
+config EDD
+ tristate "BIOS Enhanced Disk Drive calls determine boot disk (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ depends on !IA64
+ help
+ Say Y or M here if you want to enable BIOS Enhanced Disk Drive
+ Services real mode BIOS calls to determine which disk
+ BIOS tries boot from. This information is then exported via sysfs.
+
+ This option is experimental and is known to fail to boot on some
+ obscure configurations. Most disk controller BIOS vendors do
+ not yet implement this feature.
+
+config EFI_VARS
+ tristate "EFI Variable Support via sysfs"
+ depends on EFI
+ default n
+ help
+ If you say Y here, you are able to get EFI (Extensible Firmware
+ Interface) variable information via sysfs. You may read,
+ write, create, and destroy EFI variables through this interface.
+
+ Note that using this driver in concert with efibootmgr requires
+ at least test release version 0.5.0-test3 or later, which is
+ available from Matt Domsch's website located at:
+ <http://linux.dell.com/efibootmgr/testing/efibootmgr-0.5.0-test3.tar.gz>
+
+ Subsequent efibootmgr releases may be found at:
+ <http://linux.dell.com/efibootmgr>
+
+config EFI_PCDP
+ bool "Console device selection via EFI PCDP or HCDP table"
+ depends on ACPI && EFI && IA64
+ default y if IA64
+ help
+ If your firmware supplies the PCDP table, and you want to
+ automatically use the primary console device it describes
+ as the Linux console, say Y here.
+
+ If your firmware supplies the HCDP table, and you want to
+ use the first serial port it describes as the Linux console,
+ say Y here. If your EFI ConOut path contains only a UART
+ device, it will become the console automatically. Otherwise,
+ you must specify the "console=hcdp" kernel boot argument.
+
+ Neither the PCDP nor the HCDP affects naming of serial devices,
+ so a serial console may be /dev/ttyS0, /dev/ttyS1, etc, depending
+ on how the driver discovers devices.
+
+ You must also enable the appropriate drivers (serial, VGA, etc.)
+
+ See <http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf>
+
+endmenu
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
new file mode 100644
index 0000000..90fd0b2
--- /dev/null
+++ b/drivers/firmware/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the linux kernel.
+#
+obj-$(CONFIG_EDD) += edd.o
+obj-$(CONFIG_EFI_VARS) += efivars.o
+obj-$(CONFIG_EFI_PCDP) += pcdp.o
diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c
new file mode 100644
index 0000000..33b669e
--- /dev/null
+++ b/drivers/firmware/edd.c
@@ -0,0 +1,790 @@
+/*
+ * linux/arch/i386/kernel/edd.c
+ * Copyright (C) 2002, 2003, 2004 Dell Inc.
+ * by Matt Domsch <Matt_Domsch@dell.com>
+ * disk signature by Matt Domsch, Andrew Wilks, and Sandeep K. Shandilya
+ * legacy CHS by Patrick J. LoPresti <patl@users.sourceforge.net>
+ *
+ * BIOS Enhanced Disk Drive Services (EDD)
+ * conformant to T13 Committee www.t13.org
+ * projects 1572D, 1484D, 1386D, 1226DT
+ *
+ * This code takes information provided by BIOS EDD calls
+ * fn41 - Check Extensions Present and
+ * fn48 - Get Device Parametes with EDD extensions
+ * made in setup.S, copied to safe structures in setup.c,
+ * and presents it in sysfs.
+ *
+ * Please see http://linux.dell.com/edd30/results.html for
+ * the list of BIOSs which have been reported to implement EDD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/stat.h>
+#include <linux/err.h>
+#include <linux/ctype.h>
+#include <linux/slab.h>
+#include <linux/limits.h>
+#include <linux/device.h>
+#include <linux/pci.h>
+#include <linux/blkdev.h>
+#include <linux/edd.h>
+
+#define EDD_VERSION "0.16"
+#define EDD_DATE "2004-Jun-25"
+
+MODULE_AUTHOR("Matt Domsch <Matt_Domsch@Dell.com>");
+MODULE_DESCRIPTION("sysfs interface to BIOS EDD information");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(EDD_VERSION);
+
+#define left (PAGE_SIZE - (p - buf) - 1)
+
+struct edd_device {
+ unsigned int index;
+ unsigned int mbr_signature;
+ struct edd_info *info;
+ struct kobject kobj;
+};
+
+struct edd_attribute {
+ struct attribute attr;
+ ssize_t(*show) (struct edd_device * edev, char *buf);
+ int (*test) (struct edd_device * edev);
+};
+
+/* forward declarations */
+static int edd_dev_is_type(struct edd_device *edev, const char *type);
+static struct pci_dev *edd_get_pci_dev(struct edd_device *edev);
+
+static struct edd_device *edd_devices[EDD_MBR_SIG_MAX];
+
+#define EDD_DEVICE_ATTR(_name,_mode,_show,_test) \
+struct edd_attribute edd_attr_##_name = { \
+ .attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE }, \
+ .show = _show, \
+ .test = _test, \
+};
+
+static int
+edd_has_mbr_signature(struct edd_device *edev)
+{
+ return edev->index < min_t(unsigned char, edd.mbr_signature_nr, EDD_MBR_SIG_MAX);
+}
+
+static int
+edd_has_edd_info(struct edd_device *edev)
+{
+ return edev->index < min_t(unsigned char, edd.edd_info_nr, EDDMAXNR);
+}
+
+static inline struct edd_info *
+edd_dev_get_info(struct edd_device *edev)
+{
+ return edev->info;
+}
+
+static inline void
+edd_dev_set_info(struct edd_device *edev, int i)
+{
+ edev->index = i;
+ if (edd_has_mbr_signature(edev))
+ edev->mbr_signature = edd.mbr_signature[i];
+ if (edd_has_edd_info(edev))
+ edev->info = &edd.edd_info[i];
+}
+
+#define to_edd_attr(_attr) container_of(_attr,struct edd_attribute,attr)
+#define to_edd_device(obj) container_of(obj,struct edd_device,kobj)
+
+static ssize_t
+edd_attr_show(struct kobject * kobj, struct attribute *attr, char *buf)
+{
+ struct edd_device *dev = to_edd_device(kobj);
+ struct edd_attribute *edd_attr = to_edd_attr(attr);
+ ssize_t ret = 0;
+
+ if (edd_attr->show)
+ ret = edd_attr->show(dev, buf);
+ return ret;
+}
+
+static struct sysfs_ops edd_attr_ops = {
+ .show = edd_attr_show,
+};
+
+static ssize_t
+edd_show_host_bus(struct edd_device *edev, char *buf)
+{
+ struct edd_info *info;
+ char *p = buf;
+ int i;
+
+ if (!edev)
+ return -EINVAL;
+ info = edd_dev_get_info(edev);
+ if (!info || !buf)
+ return -EINVAL;
+
+ for (i = 0; i < 4; i++) {
+ if (isprint(info->params.host_bus_type[i])) {
+ p += scnprintf(p, left, "%c", info->params.host_bus_type[i]);
+ } else {
+ p += scnprintf(p, left, " ");
+ }
+ }
+
+ if (!strncmp(info->params.host_bus_type, "ISA", 3)) {
+ p += scnprintf(p, left, "\tbase_address: %x\n",
+ info->params.interface_path.isa.base_address);
+ } else if (!strncmp(info->params.host_bus_type, "PCIX", 4) ||
+ !strncmp(info->params.host_bus_type, "PCI", 3)) {
+ p += scnprintf(p, left,
+ "\t%02x:%02x.%d channel: %u\n",
+ info->params.interface_path.pci.bus,
+ info->params.interface_path.pci.slot,
+ info->params.interface_path.pci.function,
+ info->params.interface_path.pci.channel);
+ } else if (!strncmp(info->params.host_bus_type, "IBND", 4) ||
+ !strncmp(info->params.host_bus_type, "XPRS", 4) ||
+ !strncmp(info->params.host_bus_type, "HTPT", 4)) {
+ p += scnprintf(p, left,
+ "\tTBD: %llx\n",
+ info->params.interface_path.ibnd.reserved);
+
+ } else {
+ p += scnprintf(p, left, "\tunknown: %llx\n",
+ info->params.interface_path.unknown.reserved);
+ }
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_interface(struct edd_device *edev, char *buf)
+{
+ struct edd_info *info;
+ char *p = buf;
+ int i;
+
+ if (!edev)
+ return -EINVAL;
+ info = edd_dev_get_info(edev);
+ if (!info || !buf)
+ return -EINVAL;
+
+ for (i = 0; i < 8; i++) {
+ if (isprint(info->params.interface_type[i])) {
+ p += scnprintf(p, left, "%c", info->params.interface_type[i]);
+ } else {
+ p += scnprintf(p, left, " ");
+ }
+ }
+ if (!strncmp(info->params.interface_type, "ATAPI", 5)) {
+ p += scnprintf(p, left, "\tdevice: %u lun: %u\n",
+ info->params.device_path.atapi.device,
+ info->params.device_path.atapi.lun);
+ } else if (!strncmp(info->params.interface_type, "ATA", 3)) {
+ p += scnprintf(p, left, "\tdevice: %u\n",
+ info->params.device_path.ata.device);
+ } else if (!strncmp(info->params.interface_type, "SCSI", 4)) {
+ p += scnprintf(p, left, "\tid: %u lun: %llu\n",
+ info->params.device_path.scsi.id,
+ info->params.device_path.scsi.lun);
+ } else if (!strncmp(info->params.interface_type, "USB", 3)) {
+ p += scnprintf(p, left, "\tserial_number: %llx\n",
+ info->params.device_path.usb.serial_number);
+ } else if (!strncmp(info->params.interface_type, "1394", 4)) {
+ p += scnprintf(p, left, "\teui: %llx\n",
+ info->params.device_path.i1394.eui);
+ } else if (!strncmp(info->params.interface_type, "FIBRE", 5)) {
+ p += scnprintf(p, left, "\twwid: %llx lun: %llx\n",
+ info->params.device_path.fibre.wwid,
+ info->params.device_path.fibre.lun);
+ } else if (!strncmp(info->params.interface_type, "I2O", 3)) {
+ p += scnprintf(p, left, "\tidentity_tag: %llx\n",
+ info->params.device_path.i2o.identity_tag);
+ } else if (!strncmp(info->params.interface_type, "RAID", 4)) {
+ p += scnprintf(p, left, "\tidentity_tag: %x\n",
+ info->params.device_path.raid.array_number);
+ } else if (!strncmp(info->params.interface_type, "SATA", 4)) {
+ p += scnprintf(p, left, "\tdevice: %u\n",
+ info->params.device_path.sata.device);
+ } else {
+ p += scnprintf(p, left, "\tunknown: %llx %llx\n",
+ info->params.device_path.unknown.reserved1,
+ info->params.device_path.unknown.reserved2);
+ }
+
+ return (p - buf);
+}
+
+/**
+ * edd_show_raw_data() - copies raw data to buffer for userspace to parse
+ *
+ * Returns: number of bytes written, or -EINVAL on failure
+ */
+static ssize_t
+edd_show_raw_data(struct edd_device *edev, char *buf)
+{
+ struct edd_info *info;
+ ssize_t len = sizeof (info->params);
+ if (!edev)
+ return -EINVAL;
+ info = edd_dev_get_info(edev);
+ if (!info || !buf)
+ return -EINVAL;
+
+ if (!(info->params.key == 0xBEDD || info->params.key == 0xDDBE))
+ len = info->params.length;
+
+ /* In case of buggy BIOSs */
+ if (len > (sizeof(info->params)))
+ len = sizeof(info->params);
+
+ memcpy(buf, &info->params, len);
+ return len;
+}
+
+static ssize_t
+edd_show_version(struct edd_device *edev, char *buf)
+{
+ struct edd_info *info;
+ char *p = buf;
+ if (!edev)
+ return -EINVAL;
+ info = edd_dev_get_info(edev);
+ if (!info || !buf)
+ return -EINVAL;
+
+ p += scnprintf(p, left, "0x%02x\n", info->version);
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_mbr_signature(struct edd_device *edev, char *buf)
+{
+ char *p = buf;
+ p += scnprintf(p, left, "0x%08x\n", edev->mbr_signature);
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_extensions(struct edd_device *edev, char *buf)
+{
+ struct edd_info *info;
+ char *p = buf;
+ if (!edev)
+ return -EINVAL;
+ info = edd_dev_get_info(edev);
+ if (!info || !buf)
+ return -EINVAL;
+
+ if (info->interface_support & EDD_EXT_FIXED_DISK_ACCESS) {
+ p += scnprintf(p, left, "Fixed disk access\n");
+ }
+ if (info->interface_support & EDD_EXT_DEVICE_LOCKING_AND_EJECTING) {
+ p += scnprintf(p, left, "Device locking and ejecting\n");
+ }
+ if (info->interface_support & EDD_EXT_ENHANCED_DISK_DRIVE_SUPPORT) {
+ p += scnprintf(p, left, "Enhanced Disk Drive support\n");
+ }
+ if (info->interface_support & EDD_EXT_64BIT_EXTENSIONS) {
+ p += scnprintf(p, left, "64-bit extensions\n");
+ }
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_info_flags(struct edd_device *edev, char *buf)
+{
+ struct edd_info *info;
+ char *p = buf;
+ if (!edev)
+ return -EINVAL;
+ info = edd_dev_get_info(edev);
+ if (!info || !buf)
+ return -EINVAL;
+
+ if (info->params.info_flags & EDD_INFO_DMA_BOUNDARY_ERROR_TRANSPARENT)
+ p += scnprintf(p, left, "DMA boundary error transparent\n");
+ if (info->params.info_flags & EDD_INFO_GEOMETRY_VALID)
+ p += scnprintf(p, left, "geometry valid\n");
+ if (info->params.info_flags & EDD_INFO_REMOVABLE)
+ p += scnprintf(p, left, "removable\n");
+ if (info->params.info_flags & EDD_INFO_WRITE_VERIFY)
+ p += scnprintf(p, left, "write verify\n");
+ if (info->params.info_flags & EDD_INFO_MEDIA_CHANGE_NOTIFICATION)
+ p += scnprintf(p, left, "media change notification\n");
+ if (info->params.info_flags & EDD_INFO_LOCKABLE)
+ p += scnprintf(p, left, "lockable\n");
+ if (info->params.info_flags & EDD_INFO_NO_MEDIA_PRESENT)
+ p += scnprintf(p, left, "no media present\n");
+ if (info->params.info_flags & EDD_INFO_USE_INT13_FN50)
+ p += scnprintf(p, left, "use int13 fn50\n");
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_legacy_max_cylinder(struct edd_device *edev, char *buf)
+{
+ struct edd_info *info;
+ char *p = buf;
+ if (!edev)
+ return -EINVAL;
+ info = edd_dev_get_info(edev);
+ if (!info || !buf)
+ return -EINVAL;
+
+ p += snprintf(p, left, "%u\n", info->legacy_max_cylinder);
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_legacy_max_head(struct edd_device *edev, char *buf)
+{
+ struct edd_info *info;
+ char *p = buf;
+ if (!edev)
+ return -EINVAL;
+ info = edd_dev_get_info(edev);
+ if (!info || !buf)
+ return -EINVAL;
+
+ p += snprintf(p, left, "%u\n", info->legacy_max_head);
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_legacy_sectors_per_track(struct edd_device *edev, char *buf)
+{
+ struct edd_info *info;
+ char *p = buf;
+ if (!edev)
+ return -EINVAL;
+ info = edd_dev_get_info(edev);
+ if (!info || !buf)
+ return -EINVAL;
+
+ p += snprintf(p, left, "%u\n", info->legacy_sectors_per_track);
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_default_cylinders(struct edd_device *edev, char *buf)
+{
+ struct edd_info *info;
+ char *p = buf;
+ if (!edev)
+ return -EINVAL;
+ info = edd_dev_get_info(edev);
+ if (!info || !buf)
+ return -EINVAL;
+
+ p += scnprintf(p, left, "%u\n", info->params.num_default_cylinders);
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_default_heads(struct edd_device *edev, char *buf)
+{
+ struct edd_info *info;
+ char *p = buf;
+ if (!edev)
+ return -EINVAL;
+ info = edd_dev_get_info(edev);
+ if (!info || !buf)
+ return -EINVAL;
+
+ p += scnprintf(p, left, "%u\n", info->params.num_default_heads);
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_default_sectors_per_track(struct edd_device *edev, char *buf)
+{
+ struct edd_info *info;
+ char *p = buf;
+ if (!edev)
+ return -EINVAL;
+ info = edd_dev_get_info(edev);
+ if (!info || !buf)
+ return -EINVAL;
+
+ p += scnprintf(p, left, "%u\n", info->params.sectors_per_track);
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_sectors(struct edd_device *edev, char *buf)
+{
+ struct edd_info *info;
+ char *p = buf;
+ if (!edev)
+ return -EINVAL;
+ info = edd_dev_get_info(edev);
+ if (!info || !buf)
+ return -EINVAL;
+
+ p += scnprintf(p, left, "%llu\n", info->params.number_of_sectors);
+ return (p - buf);
+}
+
+
+/*
+ * Some device instances may not have all the above attributes,
+ * or the attribute values may be meaningless (i.e. if
+ * the device is < EDD 3.0, it won't have host_bus and interface
+ * information), so don't bother making files for them. Likewise
+ * if the default_{cylinders,heads,sectors_per_track} values
+ * are zero, the BIOS doesn't provide sane values, don't bother
+ * creating files for them either.
+ */
+
+static int
+edd_has_legacy_max_cylinder(struct edd_device *edev)
+{
+ struct edd_info *info;
+ if (!edev)
+ return 0;
+ info = edd_dev_get_info(edev);
+ if (!info)
+ return 0;
+ return info->legacy_max_cylinder > 0;
+}
+
+static int
+edd_has_legacy_max_head(struct edd_device *edev)
+{
+ struct edd_info *info;
+ if (!edev)
+ return 0;
+ info = edd_dev_get_info(edev);
+ if (!info)
+ return 0;
+ return info->legacy_max_head > 0;
+}
+
+static int
+edd_has_legacy_sectors_per_track(struct edd_device *edev)
+{
+ struct edd_info *info;
+ if (!edev)
+ return 0;
+ info = edd_dev_get_info(edev);
+ if (!info)
+ return 0;
+ return info->legacy_sectors_per_track > 0;
+}
+
+static int
+edd_has_default_cylinders(struct edd_device *edev)
+{
+ struct edd_info *info;
+ if (!edev)
+ return 0;
+ info = edd_dev_get_info(edev);
+ if (!info)
+ return 0;
+ return info->params.num_default_cylinders > 0;
+}
+
+static int
+edd_has_default_heads(struct edd_device *edev)
+{
+ struct edd_info *info;
+ if (!edev)
+ return 0;
+ info = edd_dev_get_info(edev);
+ if (!info)
+ return 0;
+ return info->params.num_default_heads > 0;
+}
+
+static int
+edd_has_default_sectors_per_track(struct edd_device *edev)
+{
+ struct edd_info *info;
+ if (!edev)
+ return 0;
+ info = edd_dev_get_info(edev);
+ if (!info)
+ return 0;
+ return info->params.sectors_per_track > 0;
+}
+
+static int
+edd_has_edd30(struct edd_device *edev)
+{
+ struct edd_info *info;
+ int i, nonzero_path = 0;
+ char c;
+
+ if (!edev)
+ return 0;
+ info = edd_dev_get_info(edev);
+ if (!info)
+ return 0;
+
+ if (!(info->params.key == 0xBEDD || info->params.key == 0xDDBE)) {
+ return 0;
+ }
+
+ for (i = 30; i <= 73; i++) {
+ c = *(((uint8_t *) info) + i + 4);
+ if (c) {
+ nonzero_path++;
+ break;
+ }
+ }
+ if (!nonzero_path) {
+ return 0;
+ }
+
+ return 1;
+}
+
+
+static EDD_DEVICE_ATTR(raw_data, 0444, edd_show_raw_data, edd_has_edd_info);
+static EDD_DEVICE_ATTR(version, 0444, edd_show_version, edd_has_edd_info);
+static EDD_DEVICE_ATTR(extensions, 0444, edd_show_extensions, edd_has_edd_info);
+static EDD_DEVICE_ATTR(info_flags, 0444, edd_show_info_flags, edd_has_edd_info);
+static EDD_DEVICE_ATTR(sectors, 0444, edd_show_sectors, edd_has_edd_info);
+static EDD_DEVICE_ATTR(legacy_max_cylinder, 0444,
+ edd_show_legacy_max_cylinder,
+ edd_has_legacy_max_cylinder);
+static EDD_DEVICE_ATTR(legacy_max_head, 0444, edd_show_legacy_max_head,
+ edd_has_legacy_max_head);
+static EDD_DEVICE_ATTR(legacy_sectors_per_track, 0444,
+ edd_show_legacy_sectors_per_track,
+ edd_has_legacy_sectors_per_track);
+static EDD_DEVICE_ATTR(default_cylinders, 0444, edd_show_default_cylinders,
+ edd_has_default_cylinders);
+static EDD_DEVICE_ATTR(default_heads, 0444, edd_show_default_heads,
+ edd_has_default_heads);
+static EDD_DEVICE_ATTR(default_sectors_per_track, 0444,
+ edd_show_default_sectors_per_track,
+ edd_has_default_sectors_per_track);
+static EDD_DEVICE_ATTR(interface, 0444, edd_show_interface, edd_has_edd30);
+static EDD_DEVICE_ATTR(host_bus, 0444, edd_show_host_bus, edd_has_edd30);
+static EDD_DEVICE_ATTR(mbr_signature, 0444, edd_show_mbr_signature, edd_has_mbr_signature);
+
+
+/* These are default attributes that are added for every edd
+ * device discovered. There are none.
+ */
+static struct attribute * def_attrs[] = {
+ NULL,
+};
+
+/* These attributes are conditional and only added for some devices. */
+static struct edd_attribute * edd_attrs[] = {
+ &edd_attr_raw_data,
+ &edd_attr_version,
+ &edd_attr_extensions,
+ &edd_attr_info_flags,
+ &edd_attr_sectors,
+ &edd_attr_legacy_max_cylinder,
+ &edd_attr_legacy_max_head,
+ &edd_attr_legacy_sectors_per_track,
+ &edd_attr_default_cylinders,
+ &edd_attr_default_heads,
+ &edd_attr_default_sectors_per_track,
+ &edd_attr_interface,
+ &edd_attr_host_bus,
+ &edd_attr_mbr_signature,
+ NULL,
+};
+
+/**
+ * edd_release - free edd structure
+ * @kobj: kobject of edd structure
+ *
+ * This is called when the refcount of the edd structure
+ * reaches 0. This should happen right after we unregister,
+ * but just in case, we use the release callback anyway.
+ */
+
+static void edd_release(struct kobject * kobj)
+{
+ struct edd_device * dev = to_edd_device(kobj);
+ kfree(dev);
+}
+
+static struct kobj_type ktype_edd = {
+ .release = edd_release,
+ .sysfs_ops = &edd_attr_ops,
+ .default_attrs = def_attrs,
+};
+
+static decl_subsys(edd,&ktype_edd,NULL);
+
+
+/**
+ * edd_dev_is_type() - is this EDD device a 'type' device?
+ * @edev
+ * @type - a host bus or interface identifier string per the EDD spec
+ *
+ * Returns 1 (TRUE) if it is a 'type' device, 0 otherwise.
+ */
+static int
+edd_dev_is_type(struct edd_device *edev, const char *type)
+{
+ struct edd_info *info;
+ if (!edev)
+ return 0;
+ info = edd_dev_get_info(edev);
+
+ if (type && info) {
+ if (!strncmp(info->params.host_bus_type, type, strlen(type)) ||
+ !strncmp(info->params.interface_type, type, strlen(type)))
+ return 1;
+ }
+ return 0;
+}
+
+/**
+ * edd_get_pci_dev() - finds pci_dev that matches edev
+ * @edev - edd_device
+ *
+ * Returns pci_dev if found, or NULL
+ */
+static struct pci_dev *
+edd_get_pci_dev(struct edd_device *edev)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+
+ if (edd_dev_is_type(edev, "PCI")) {
+ return pci_find_slot(info->params.interface_path.pci.bus,
+ PCI_DEVFN(info->params.interface_path.pci.slot,
+ info->params.interface_path.pci.
+ function));
+ }
+ return NULL;
+}
+
+static int
+edd_create_symlink_to_pcidev(struct edd_device *edev)
+{
+
+ struct pci_dev *pci_dev = edd_get_pci_dev(edev);
+ if (!pci_dev)
+ return 1;
+ return sysfs_create_link(&edev->kobj,&pci_dev->dev.kobj,"pci_dev");
+}
+
+static inline void
+edd_device_unregister(struct edd_device *edev)
+{
+ kobject_unregister(&edev->kobj);
+}
+
+static void edd_populate_dir(struct edd_device * edev)
+{
+ struct edd_attribute * attr;
+ int error = 0;
+ int i;
+
+ for (i = 0; (attr = edd_attrs[i]) && !error; i++) {
+ if (!attr->test ||
+ (attr->test && attr->test(edev)))
+ error = sysfs_create_file(&edev->kobj,&attr->attr);
+ }
+
+ if (!error) {
+ edd_create_symlink_to_pcidev(edev);
+ }
+}
+
+static int
+edd_device_register(struct edd_device *edev, int i)
+{
+ int error;
+
+ if (!edev)
+ return 1;
+ memset(edev, 0, sizeof (*edev));
+ edd_dev_set_info(edev, i);
+ kobject_set_name(&edev->kobj, "int13_dev%02x",
+ 0x80 + i);
+ kobj_set_kset_s(edev,edd_subsys);
+ error = kobject_register(&edev->kobj);
+ if (!error)
+ edd_populate_dir(edev);
+ return error;
+}
+
+static inline int edd_num_devices(void)
+{
+ return max_t(unsigned char,
+ min_t(unsigned char, EDD_MBR_SIG_MAX, edd.mbr_signature_nr),
+ min_t(unsigned char, EDDMAXNR, edd.edd_info_nr));
+}
+
+/**
+ * edd_init() - creates sysfs tree of EDD data
+ */
+static int __init
+edd_init(void)
+{
+ unsigned int i;
+ int rc=0;
+ struct edd_device *edev;
+
+ printk(KERN_INFO "BIOS EDD facility v%s %s, %d devices found\n",
+ EDD_VERSION, EDD_DATE, edd_num_devices());
+
+ if (!edd_num_devices()) {
+ printk(KERN_INFO "EDD information not available.\n");
+ return 1;
+ }
+
+ rc = firmware_register(&edd_subsys);
+ if (rc)
+ return rc;
+
+ for (i = 0; i < edd_num_devices() && !rc; i++) {
+ edev = kmalloc(sizeof (*edev), GFP_KERNEL);
+ if (!edev)
+ return -ENOMEM;
+
+ rc = edd_device_register(edev, i);
+ if (rc) {
+ kfree(edev);
+ break;
+ }
+ edd_devices[i] = edev;
+ }
+
+ if (rc)
+ firmware_unregister(&edd_subsys);
+ return rc;
+}
+
+static void __exit
+edd_exit(void)
+{
+ int i;
+ struct edd_device *edev;
+
+ for (i = 0; i < edd_num_devices(); i++) {
+ if ((edev = edd_devices[i]))
+ edd_device_unregister(edev);
+ }
+ firmware_unregister(&edd_subsys);
+}
+
+late_initcall(edd_init);
+module_exit(edd_exit);
diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c
new file mode 100644
index 0000000..0287ff6
--- /dev/null
+++ b/drivers/firmware/efivars.c
@@ -0,0 +1,781 @@
+/*
+ * EFI Variables - efivars.c
+ *
+ * Copyright (C) 2001,2003,2004 Dell <Matt_Domsch@dell.com>
+ * Copyright (C) 2004 Intel Corporation <matthew.e.tolentino@intel.com>
+ *
+ * This code takes all variables accessible from EFI runtime and
+ * exports them via sysfs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Changelog:
+ *
+ * 17 May 2004 - Matt Domsch <Matt_Domsch@dell.com>
+ * remove check for efi_enabled in exit
+ * add MODULE_VERSION
+ *
+ * 26 Apr 2004 - Matt Domsch <Matt_Domsch@dell.com>
+ * minor bug fixes
+ *
+ * 21 Apr 2004 - Matt Tolentino <matthew.e.tolentino@intel.com)
+ * converted driver to export variable information via sysfs
+ * and moved to drivers/firmware directory
+ * bumped revision number to v0.07 to reflect conversion & move
+ *
+ * 10 Dec 2002 - Matt Domsch <Matt_Domsch@dell.com>
+ * fix locking per Peter Chubb's findings
+ *
+ * 25 Mar 2002 - Matt Domsch <Matt_Domsch@dell.com>
+ * move uuid_unparse() to include/asm-ia64/efi.h:efi_guid_unparse()
+ *
+ * 12 Feb 2002 - Matt Domsch <Matt_Domsch@dell.com>
+ * use list_for_each_safe when deleting vars.
+ * remove ifdef CONFIG_SMP around include <linux/smp.h>
+ * v0.04 release to linux-ia64@linuxia64.org
+ *
+ * 20 April 2001 - Matt Domsch <Matt_Domsch@dell.com>
+ * Moved vars from /proc/efi to /proc/efi/vars, and made
+ * efi.c own the /proc/efi directory.
+ * v0.03 release to linux-ia64@linuxia64.org
+ *
+ * 26 March 2001 - Matt Domsch <Matt_Domsch@dell.com>
+ * At the request of Stephane, moved ownership of /proc/efi
+ * to efi.c, and now efivars lives under /proc/efi/vars.
+ *
+ * 12 March 2001 - Matt Domsch <Matt_Domsch@dell.com>
+ * Feedback received from Stephane Eranian incorporated.
+ * efivar_write() checks copy_from_user() return value.
+ * efivar_read/write() returns proper errno.
+ * v0.02 release to linux-ia64@linuxia64.org
+ *
+ * 26 February 2001 - Matt Domsch <Matt_Domsch@dell.com>
+ * v0.01 release to linux-ia64@linuxia64.org
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/sched.h> /* for capable() */
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/smp.h>
+#include <linux/efi.h>
+#include <linux/sysfs.h>
+#include <linux/kobject.h>
+#include <linux/device.h>
+
+#include <asm/uaccess.h>
+
+#define EFIVARS_VERSION "0.08"
+#define EFIVARS_DATE "2004-May-17"
+
+MODULE_AUTHOR("Matt Domsch <Matt_Domsch@Dell.com>");
+MODULE_DESCRIPTION("sysfs interface to EFI Variables");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(EFIVARS_VERSION);
+
+/*
+ * efivars_lock protects two things:
+ * 1) efivar_list - adds, removals, reads, writes
+ * 2) efi.[gs]et_variable() calls.
+ * It must not be held when creating sysfs entries or calling kmalloc.
+ * efi.get_next_variable() is only called from efivars_init(),
+ * which is protected by the BKL, so that path is safe.
+ */
+static DEFINE_SPINLOCK(efivars_lock);
+static LIST_HEAD(efivar_list);
+
+/*
+ * The maximum size of VariableName + Data = 1024
+ * Therefore, it's reasonable to save that much
+ * space in each part of the structure,
+ * and we use a page for reading/writing.
+ */
+
+struct efi_variable {
+ efi_char16_t VariableName[1024/sizeof(efi_char16_t)];
+ efi_guid_t VendorGuid;
+ unsigned long DataSize;
+ __u8 Data[1024];
+ efi_status_t Status;
+ __u32 Attributes;
+} __attribute__((packed));
+
+
+struct efivar_entry {
+ struct efi_variable var;
+ struct list_head list;
+ struct kobject kobj;
+};
+
+#define get_efivar_entry(n) list_entry(n, struct efivar_entry, list)
+
+struct efivar_attribute {
+ struct attribute attr;
+ ssize_t (*show) (struct efivar_entry *entry, char *buf);
+ ssize_t (*store)(struct efivar_entry *entry, const char *buf, size_t count);
+};
+
+
+#define EFI_ATTR(_name, _mode, _show, _store) \
+struct subsys_attribute efi_attr_##_name = { \
+ .attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE}, \
+ .show = _show, \
+ .store = _store, \
+};
+
+#define EFIVAR_ATTR(_name, _mode, _show, _store) \
+struct efivar_attribute efivar_attr_##_name = { \
+ .attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE}, \
+ .show = _show, \
+ .store = _store, \
+};
+
+#define VAR_SUBSYS_ATTR(_name, _mode, _show, _store) \
+struct subsys_attribute var_subsys_attr_##_name = { \
+ .attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE}, \
+ .show = _show, \
+ .store = _store, \
+};
+
+#define to_efivar_attr(_attr) container_of(_attr, struct efivar_attribute, attr)
+#define to_efivar_entry(obj) container_of(obj, struct efivar_entry, kobj)
+
+/*
+ * Prototype for sysfs creation function
+ */
+static int
+efivar_create_sysfs_entry(unsigned long variable_name_size,
+ efi_char16_t *variable_name,
+ efi_guid_t *vendor_guid);
+
+/* Return the number of unicode characters in data */
+static unsigned long
+utf8_strlen(efi_char16_t *data, unsigned long maxlength)
+{
+ unsigned long length = 0;
+
+ while (*data++ != 0 && length < maxlength)
+ length++;
+ return length;
+}
+
+/*
+ * Return the number of bytes is the length of this string
+ * Note: this is NOT the same as the number of unicode characters
+ */
+static inline unsigned long
+utf8_strsize(efi_char16_t *data, unsigned long maxlength)
+{
+ return utf8_strlen(data, maxlength/sizeof(efi_char16_t)) * sizeof(efi_char16_t);
+}
+
+static efi_status_t
+get_var_data(struct efi_variable *var)
+{
+ efi_status_t status;
+
+ spin_lock(&efivars_lock);
+ var->DataSize = 1024;
+ status = efi.get_variable(var->VariableName,
+ &var->VendorGuid,
+ &var->Attributes,
+ &var->DataSize,
+ var->Data);
+ spin_unlock(&efivars_lock);
+ if (status != EFI_SUCCESS) {
+ printk(KERN_WARNING "efivars: get_variable() failed 0x%lx!\n",
+ status);
+ }
+ return status;
+}
+
+static ssize_t
+efivar_guid_read(struct efivar_entry *entry, char *buf)
+{
+ struct efi_variable *var = &entry->var;
+ char *str = buf;
+
+ if (!entry || !buf)
+ return 0;
+
+ efi_guid_unparse(&var->VendorGuid, str);
+ str += strlen(str);
+ str += sprintf(str, "\n");
+
+ return str - buf;
+}
+
+static ssize_t
+efivar_attr_read(struct efivar_entry *entry, char *buf)
+{
+ struct efi_variable *var = &entry->var;
+ char *str = buf;
+ efi_status_t status;
+
+ if (!entry || !buf)
+ return -EINVAL;
+
+ status = get_var_data(var);
+ if (status != EFI_SUCCESS)
+ return -EIO;
+
+ if (var->Attributes & 0x1)
+ str += sprintf(str, "EFI_VARIABLE_NON_VOLATILE\n");
+ if (var->Attributes & 0x2)
+ str += sprintf(str, "EFI_VARIABLE_BOOTSERVICE_ACCESS\n");
+ if (var->Attributes & 0x4)
+ str += sprintf(str, "EFI_VARIABLE_RUNTIME_ACCESS\n");
+ return str - buf;
+}
+
+static ssize_t
+efivar_size_read(struct efivar_entry *entry, char *buf)
+{
+ struct efi_variable *var = &entry->var;
+ char *str = buf;
+ efi_status_t status;
+
+ if (!entry || !buf)
+ return -EINVAL;
+
+ status = get_var_data(var);
+ if (status != EFI_SUCCESS)
+ return -EIO;
+
+ str += sprintf(str, "0x%lx\n", var->DataSize);
+ return str - buf;
+}
+
+static ssize_t
+efivar_data_read(struct efivar_entry *entry, char *buf)
+{
+ struct efi_variable *var = &entry->var;
+ efi_status_t status;
+
+ if (!entry || !buf)
+ return -EINVAL;
+
+ status = get_var_data(var);
+ if (status != EFI_SUCCESS)
+ return -EIO;
+
+ memcpy(buf, var->Data, var->DataSize);
+ return var->DataSize;
+}
+/*
+ * We allow each variable to be edited via rewriting the
+ * entire efi variable structure.
+ */
+static ssize_t
+efivar_store_raw(struct efivar_entry *entry, const char *buf, size_t count)
+{
+ struct efi_variable *new_var, *var = &entry->var;
+ efi_status_t status = EFI_NOT_FOUND;
+
+ if (count != sizeof(struct efi_variable))
+ return -EINVAL;
+
+ new_var = (struct efi_variable *)buf;
+ /*
+ * If only updating the variable data, then the name
+ * and guid should remain the same
+ */
+ if (memcmp(new_var->VariableName, var->VariableName, sizeof(var->VariableName)) ||
+ efi_guidcmp(new_var->VendorGuid, var->VendorGuid)) {
+ printk(KERN_ERR "efivars: Cannot edit the wrong variable!\n");
+ return -EINVAL;
+ }
+
+ if ((new_var->DataSize <= 0) || (new_var->Attributes == 0)){
+ printk(KERN_ERR "efivars: DataSize & Attributes must be valid!\n");
+ return -EINVAL;
+ }
+
+ spin_lock(&efivars_lock);
+ status = efi.set_variable(new_var->VariableName,
+ &new_var->VendorGuid,
+ new_var->Attributes,
+ new_var->DataSize,
+ new_var->Data);
+
+ spin_unlock(&efivars_lock);
+
+ if (status != EFI_SUCCESS) {
+ printk(KERN_WARNING "efivars: set_variable() failed: status=%lx\n",
+ status);
+ return -EIO;
+ }
+
+ memcpy(&entry->var, new_var, count);
+ return count;
+}
+
+static ssize_t
+efivar_show_raw(struct efivar_entry *entry, char *buf)
+{
+ struct efi_variable *var = &entry->var;
+ efi_status_t status;
+
+ if (!entry || !buf)
+ return 0;
+
+ status = get_var_data(var);
+ if (status != EFI_SUCCESS)
+ return -EIO;
+
+ memcpy(buf, var, sizeof(*var));
+ return sizeof(*var);
+}
+
+/*
+ * Generic read/write functions that call the specific functions of
+ * the atttributes...
+ */
+static ssize_t efivar_attr_show(struct kobject *kobj, struct attribute *attr,
+ char *buf)
+{
+ struct efivar_entry *var = to_efivar_entry(kobj);
+ struct efivar_attribute *efivar_attr = to_efivar_attr(attr);
+ ssize_t ret = 0;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ if (efivar_attr->show) {
+ ret = efivar_attr->show(var, buf);
+ }
+ return ret;
+}
+
+static ssize_t efivar_attr_store(struct kobject *kobj, struct attribute *attr,
+ const char *buf, size_t count)
+{
+ struct efivar_entry *var = to_efivar_entry(kobj);
+ struct efivar_attribute *efivar_attr = to_efivar_attr(attr);
+ ssize_t ret = 0;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ if (efivar_attr->store)
+ ret = efivar_attr->store(var, buf, count);
+
+ return ret;
+}
+
+static struct sysfs_ops efivar_attr_ops = {
+ .show = efivar_attr_show,
+ .store = efivar_attr_store,
+};
+
+static void efivar_release(struct kobject *kobj)
+{
+ struct efivar_entry *var = container_of(kobj, struct efivar_entry, kobj);
+ spin_lock(&efivars_lock);
+ list_del(&var->list);
+ spin_unlock(&efivars_lock);
+ kfree(var);
+}
+
+static EFIVAR_ATTR(guid, 0400, efivar_guid_read, NULL);
+static EFIVAR_ATTR(attributes, 0400, efivar_attr_read, NULL);
+static EFIVAR_ATTR(size, 0400, efivar_size_read, NULL);
+static EFIVAR_ATTR(data, 0400, efivar_data_read, NULL);
+static EFIVAR_ATTR(raw_var, 0600, efivar_show_raw, efivar_store_raw);
+
+static struct attribute *def_attrs[] = {
+ &efivar_attr_guid.attr,
+ &efivar_attr_size.attr,
+ &efivar_attr_attributes.attr,
+ &efivar_attr_data.attr,
+ &efivar_attr_raw_var.attr,
+ NULL,
+};
+
+static struct kobj_type ktype_efivar = {
+ .release = efivar_release,
+ .sysfs_ops = &efivar_attr_ops,
+ .default_attrs = def_attrs,
+};
+
+static ssize_t
+dummy(struct subsystem *sub, char *buf)
+{
+ return -ENODEV;
+}
+
+static inline void
+efivar_unregister(struct efivar_entry *var)
+{
+ kobject_unregister(&var->kobj);
+}
+
+
+static ssize_t
+efivar_create(struct subsystem *sub, const char *buf, size_t count)
+{
+ struct efi_variable *new_var = (struct efi_variable *)buf;
+ struct efivar_entry *search_efivar = NULL;
+ unsigned long strsize1, strsize2;
+ struct list_head *pos, *n;
+ efi_status_t status = EFI_NOT_FOUND;
+ int found = 0;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ spin_lock(&efivars_lock);
+
+ /*
+ * Does this variable already exist?
+ */
+ list_for_each_safe(pos, n, &efivar_list) {
+ search_efivar = get_efivar_entry(pos);
+ strsize1 = utf8_strsize(search_efivar->var.VariableName, 1024);
+ strsize2 = utf8_strsize(new_var->VariableName, 1024);
+ if (strsize1 == strsize2 &&
+ !memcmp(&(search_efivar->var.VariableName),
+ new_var->VariableName, strsize1) &&
+ !efi_guidcmp(search_efivar->var.VendorGuid,
+ new_var->VendorGuid)) {
+ found = 1;
+ break;
+ }
+ }
+ if (found) {
+ spin_unlock(&efivars_lock);
+ return -EINVAL;
+ }
+
+ /* now *really* create the variable via EFI */
+ status = efi.set_variable(new_var->VariableName,
+ &new_var->VendorGuid,
+ new_var->Attributes,
+ new_var->DataSize,
+ new_var->Data);
+
+ if (status != EFI_SUCCESS) {
+ printk(KERN_WARNING "efivars: set_variable() failed: status=%lx\n",
+ status);
+ spin_unlock(&efivars_lock);
+ return -EIO;
+ }
+ spin_unlock(&efivars_lock);
+
+ /* Create the entry in sysfs. Locking is not required here */
+ status = efivar_create_sysfs_entry(utf8_strsize(new_var->VariableName,
+ 1024), new_var->VariableName, &new_var->VendorGuid);
+ if (status) {
+ printk(KERN_WARNING "efivars: variable created, but sysfs entry wasn't.\n");
+ }
+ return count;
+}
+
+static ssize_t
+efivar_delete(struct subsystem *sub, const char *buf, size_t count)
+{
+ struct efi_variable *del_var = (struct efi_variable *)buf;
+ struct efivar_entry *search_efivar = NULL;
+ unsigned long strsize1, strsize2;
+ struct list_head *pos, *n;
+ efi_status_t status = EFI_NOT_FOUND;
+ int found = 0;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ spin_lock(&efivars_lock);
+
+ /*
+ * Does this variable already exist?
+ */
+ list_for_each_safe(pos, n, &efivar_list) {
+ search_efivar = get_efivar_entry(pos);
+ strsize1 = utf8_strsize(search_efivar->var.VariableName, 1024);
+ strsize2 = utf8_strsize(del_var->VariableName, 1024);
+ if (strsize1 == strsize2 &&
+ !memcmp(&(search_efivar->var.VariableName),
+ del_var->VariableName, strsize1) &&
+ !efi_guidcmp(search_efivar->var.VendorGuid,
+ del_var->VendorGuid)) {
+ found = 1;
+ break;
+ }
+ }
+ if (!found) {
+ spin_unlock(&efivars_lock);
+ return -EINVAL;
+ }
+ /* force the Attributes/DataSize to 0 to ensure deletion */
+ del_var->Attributes = 0;
+ del_var->DataSize = 0;
+
+ status = efi.set_variable(del_var->VariableName,
+ &del_var->VendorGuid,
+ del_var->Attributes,
+ del_var->DataSize,
+ del_var->Data);
+
+ if (status != EFI_SUCCESS) {
+ printk(KERN_WARNING "efivars: set_variable() failed: status=%lx\n",
+ status);
+ spin_unlock(&efivars_lock);
+ return -EIO;
+ }
+ /* We need to release this lock before unregistering. */
+ spin_unlock(&efivars_lock);
+
+ efivar_unregister(search_efivar);
+
+ /* It's dead Jim.... */
+ return count;
+}
+
+static VAR_SUBSYS_ATTR(new_var, 0200, dummy, efivar_create);
+static VAR_SUBSYS_ATTR(del_var, 0200, dummy, efivar_delete);
+
+static struct subsys_attribute *var_subsys_attrs[] = {
+ &var_subsys_attr_new_var,
+ &var_subsys_attr_del_var,
+ NULL,
+};
+
+/*
+ * Let's not leave out systab information that snuck into
+ * the efivars driver
+ */
+static ssize_t
+systab_read(struct subsystem *entry, char *buf)
+{
+ char *str = buf;
+
+ if (!entry || !buf)
+ return -EINVAL;
+
+ if (efi.mps)
+ str += sprintf(str, "MPS=0x%lx\n", __pa(efi.mps));
+ if (efi.acpi20)
+ str += sprintf(str, "ACPI20=0x%lx\n", __pa(efi.acpi20));
+ if (efi.acpi)
+ str += sprintf(str, "ACPI=0x%lx\n", __pa(efi.acpi));
+ if (efi.smbios)
+ str += sprintf(str, "SMBIOS=0x%lx\n", __pa(efi.smbios));
+ if (efi.hcdp)
+ str += sprintf(str, "HCDP=0x%lx\n", __pa(efi.hcdp));
+ if (efi.boot_info)
+ str += sprintf(str, "BOOTINFO=0x%lx\n", __pa(efi.boot_info));
+ if (efi.uga)
+ str += sprintf(str, "UGA=0x%lx\n", __pa(efi.uga));
+
+ return str - buf;
+}
+
+static EFI_ATTR(systab, 0400, systab_read, NULL);
+
+static struct subsys_attribute *efi_subsys_attrs[] = {
+ &efi_attr_systab,
+ NULL, /* maybe more in the future? */
+};
+
+static decl_subsys(vars, &ktype_efivar, NULL);
+static decl_subsys(efi, NULL, NULL);
+
+/*
+ * efivar_create_sysfs_entry()
+ * Requires:
+ * variable_name_size = number of bytes required to hold
+ * variable_name (not counting the NULL
+ * character at the end.
+ * efivars_lock is not held on entry or exit.
+ * Returns 1 on failure, 0 on success
+ */
+static int
+efivar_create_sysfs_entry(unsigned long variable_name_size,
+ efi_char16_t *variable_name,
+ efi_guid_t *vendor_guid)
+{
+ int i, short_name_size = variable_name_size / sizeof(efi_char16_t) + 38;
+ char *short_name;
+ struct efivar_entry *new_efivar;
+
+ short_name = kmalloc(short_name_size + 1, GFP_KERNEL);
+ new_efivar = kmalloc(sizeof(struct efivar_entry), GFP_KERNEL);
+
+ if (!short_name || !new_efivar) {
+ if (short_name) kfree(short_name);
+ if (new_efivar) kfree(new_efivar);
+ return 1;
+ }
+ memset(short_name, 0, short_name_size+1);
+ memset(new_efivar, 0, sizeof(struct efivar_entry));
+
+ memcpy(new_efivar->var.VariableName, variable_name,
+ variable_name_size);
+ memcpy(&(new_efivar->var.VendorGuid), vendor_guid, sizeof(efi_guid_t));
+
+ /* Convert Unicode to normal chars (assume top bits are 0),
+ ala UTF-8 */
+ for (i=0; i < (int)(variable_name_size / sizeof(efi_char16_t)); i++) {
+ short_name[i] = variable_name[i] & 0xFF;
+ }
+ /* This is ugly, but necessary to separate one vendor's
+ private variables from another's. */
+
+ *(short_name + strlen(short_name)) = '-';
+ efi_guid_unparse(vendor_guid, short_name + strlen(short_name));
+
+ kobject_set_name(&new_efivar->kobj, "%s", short_name);
+ kobj_set_kset_s(new_efivar, vars_subsys);
+ kobject_register(&new_efivar->kobj);
+
+ kfree(short_name); short_name = NULL;
+
+ spin_lock(&efivars_lock);
+ list_add(&new_efivar->list, &efivar_list);
+ spin_unlock(&efivars_lock);
+
+ return 0;
+}
+/*
+ * For now we register the efi subsystem with the firmware subsystem
+ * and the vars subsystem with the efi subsystem. In the future, it
+ * might make sense to split off the efi subsystem into its own
+ * driver, but for now only efivars will register with it, so just
+ * include it here.
+ */
+
+static int __init
+efivars_init(void)
+{
+ efi_status_t status = EFI_NOT_FOUND;
+ efi_guid_t vendor_guid;
+ efi_char16_t *variable_name;
+ struct subsys_attribute *attr;
+ unsigned long variable_name_size = 1024;
+ int i, error = 0;
+
+ if (!efi_enabled)
+ return -ENODEV;
+
+ variable_name = kmalloc(variable_name_size, GFP_KERNEL);
+ if (!variable_name) {
+ printk(KERN_ERR "efivars: Memory allocation failed.\n");
+ return -ENOMEM;
+ }
+
+ memset(variable_name, 0, variable_name_size);
+
+ printk(KERN_INFO "EFI Variables Facility v%s %s\n", EFIVARS_VERSION,
+ EFIVARS_DATE);
+
+ /*
+ * For now we'll register the efi subsys within this driver
+ */
+
+ error = firmware_register(&efi_subsys);
+
+ if (error) {
+ printk(KERN_ERR "efivars: Firmware registration failed with error %d.\n", error);
+ goto out_free;
+ }
+
+ kset_set_kset_s(&vars_subsys, efi_subsys);
+
+ error = subsystem_register(&vars_subsys);
+
+ if (error) {
+ printk(KERN_ERR "efivars: Subsystem registration failed with error %d.\n", error);
+ goto out_firmware_unregister;
+ }
+
+ /*
+ * Per EFI spec, the maximum storage allocated for both
+ * the variable name and variable data is 1024 bytes.
+ */
+
+ do {
+ variable_name_size = 1024;
+
+ status = efi.get_next_variable(&variable_name_size,
+ variable_name,
+ &vendor_guid);
+ switch (status) {
+ case EFI_SUCCESS:
+ efivar_create_sysfs_entry(variable_name_size,
+ variable_name,
+ &vendor_guid);
+ break;
+ case EFI_NOT_FOUND:
+ break;
+ default:
+ printk(KERN_WARNING "efivars: get_next_variable: status=%lx\n",
+ status);
+ status = EFI_NOT_FOUND;
+ break;
+ }
+ } while (status != EFI_NOT_FOUND);
+
+ /*
+ * Now add attributes to allow creation of new vars
+ * and deletion of existing ones...
+ */
+
+ for (i = 0; (attr = var_subsys_attrs[i]) && !error; i++) {
+ if (attr->show && attr->store)
+ error = subsys_create_file(&vars_subsys, attr);
+ }
+
+ /* Don't forget the systab entry */
+
+ for (i = 0; (attr = efi_subsys_attrs[i]) && !error; i++) {
+ if (attr->show)
+ error = subsys_create_file(&efi_subsys, attr);
+ }
+
+ if (error)
+ printk(KERN_ERR "efivars: Sysfs attribute export failed with error %d.\n", error);
+ else
+ goto out_free;
+
+ subsystem_unregister(&vars_subsys);
+
+out_firmware_unregister:
+ firmware_unregister(&efi_subsys);
+
+out_free:
+ kfree(variable_name);
+
+ return error;
+}
+
+static void __exit
+efivars_exit(void)
+{
+ struct list_head *pos, *n;
+
+ list_for_each_safe(pos, n, &efivar_list)
+ efivar_unregister(get_efivar_entry(pos));
+
+ subsystem_unregister(&vars_subsys);
+ firmware_unregister(&efi_subsys);
+}
+
+module_init(efivars_init);
+module_exit(efivars_exit);
+
diff --git a/drivers/firmware/pcdp.c b/drivers/firmware/pcdp.c
new file mode 100644
index 0000000..6d5df6c
--- /dev/null
+++ b/drivers/firmware/pcdp.c
@@ -0,0 +1,100 @@
+/*
+ * Parse the EFI PCDP table to locate the console device.
+ *
+ * (c) Copyright 2002, 2003, 2004 Hewlett-Packard Development Company, L.P.
+ * Khalid Aziz <khalid.aziz@hp.com>
+ * Alex Williamson <alex.williamson@hp.com>
+ * Bjorn Helgaas <bjorn.helgaas@hp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/console.h>
+#include <linux/efi.h>
+#include <linux/serial.h>
+#include "pcdp.h"
+
+static int __init
+setup_serial_console(struct pcdp_uart *uart)
+{
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ int mmio;
+ static char options[64];
+
+ mmio = (uart->addr.address_space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY);
+ snprintf(options, sizeof(options), "console=uart,%s,0x%lx,%lun%d",
+ mmio ? "mmio" : "io", uart->addr.address, uart->baud,
+ uart->bits ? uart->bits : 8);
+
+ return early_serial_console_init(options);
+#else
+ return -ENODEV;
+#endif
+}
+
+static int __init
+setup_vga_console(struct pcdp_vga *vga)
+{
+#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
+ if (efi_mem_type(0xA0000) == EFI_CONVENTIONAL_MEMORY) {
+ printk(KERN_ERR "PCDP: VGA selected, but frame buffer is not MMIO!\n");
+ return -ENODEV;
+ }
+
+ conswitchp = &vga_con;
+ printk(KERN_INFO "PCDP: VGA console\n");
+ return 0;
+#else
+ return -ENODEV;
+#endif
+}
+
+int __init
+efi_setup_pcdp_console(char *cmdline)
+{
+ struct pcdp *pcdp;
+ struct pcdp_uart *uart;
+ struct pcdp_device *dev, *end;
+ int i, serial = 0;
+
+ pcdp = efi.hcdp;
+ if (!pcdp)
+ return -ENODEV;
+
+ printk(KERN_INFO "PCDP: v%d at 0x%lx\n", pcdp->rev, __pa(pcdp));
+
+ if (strstr(cmdline, "console=hcdp")) {
+ if (pcdp->rev < 3)
+ serial = 1;
+ } else if (strstr(cmdline, "console=")) {
+ printk(KERN_INFO "Explicit \"console=\"; ignoring PCDP\n");
+ return -ENODEV;
+ }
+
+ if (pcdp->rev < 3 && efi_uart_console_only())
+ serial = 1;
+
+ for (i = 0, uart = pcdp->uart; i < pcdp->num_uarts; i++, uart++) {
+ if (uart->flags & PCDP_UART_PRIMARY_CONSOLE || serial) {
+ if (uart->type == PCDP_CONSOLE_UART) {
+ return setup_serial_console(uart);
+ }
+ }
+ }
+
+ end = (struct pcdp_device *) ((u8 *) pcdp + pcdp->length);
+ for (dev = (struct pcdp_device *) (pcdp->uart + pcdp->num_uarts);
+ dev < end;
+ dev = (struct pcdp_device *) ((u8 *) dev + dev->length)) {
+ if (dev->flags & PCDP_PRIMARY_CONSOLE) {
+ if (dev->type == PCDP_CONSOLE_VGA) {
+ return setup_vga_console((struct pcdp_vga *) dev);
+ }
+ }
+ }
+
+ return -ENODEV;
+}
diff --git a/drivers/firmware/pcdp.h b/drivers/firmware/pcdp.h
new file mode 100644
index 0000000..863bb6f
--- /dev/null
+++ b/drivers/firmware/pcdp.h
@@ -0,0 +1,84 @@
+/*
+ * Definitions for PCDP-defined console devices
+ *
+ * v1.0a: http://www.dig64.org/specifications/DIG64_HCDPv10a_01.pdf
+ * v2.0: http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf
+ *
+ * (c) Copyright 2002, 2004 Hewlett-Packard Development Company, L.P.
+ * Khalid Aziz <khalid.aziz@hp.com>
+ * Bjorn Helgaas <bjorn.helgaas@hp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define PCDP_CONSOLE 0
+#define PCDP_DEBUG 1
+#define PCDP_CONSOLE_OUTPUT 2
+#define PCDP_CONSOLE_INPUT 3
+
+#define PCDP_UART (0 << 3)
+#define PCDP_VGA (1 << 3)
+#define PCDP_USB (2 << 3)
+
+/* pcdp_uart.type and pcdp_device.type */
+#define PCDP_CONSOLE_UART (PCDP_UART | PCDP_CONSOLE)
+#define PCDP_DEBUG_UART (PCDP_UART | PCDP_DEBUG)
+#define PCDP_CONSOLE_VGA (PCDP_VGA | PCDP_CONSOLE_OUTPUT)
+#define PCDP_CONSOLE_USB (PCDP_USB | PCDP_CONSOLE_INPUT)
+
+/* pcdp_uart.flags */
+#define PCDP_UART_EDGE_SENSITIVE (1 << 0)
+#define PCDP_UART_ACTIVE_LOW (1 << 1)
+#define PCDP_UART_PRIMARY_CONSOLE (1 << 2)
+#define PCDP_UART_IRQ (1 << 6) /* in pci_func for rev < 3 */
+#define PCDP_UART_PCI (1 << 7) /* in pci_func for rev < 3 */
+
+struct pcdp_uart {
+ u8 type;
+ u8 bits;
+ u8 parity;
+ u8 stop_bits;
+ u8 pci_seg;
+ u8 pci_bus;
+ u8 pci_dev;
+ u8 pci_func;
+ u64 baud;
+ struct acpi_generic_address addr;
+ u16 pci_dev_id;
+ u16 pci_vendor_id;
+ u32 gsi;
+ u32 clock_rate;
+ u8 pci_prog_intfc;
+ u8 flags;
+};
+
+struct pcdp_vga {
+ u8 count; /* address space descriptors */
+};
+
+/* pcdp_device.flags */
+#define PCDP_PRIMARY_CONSOLE 1
+
+struct pcdp_device {
+ u8 type;
+ u8 flags;
+ u16 length;
+ u16 efi_index;
+};
+
+struct pcdp {
+ u8 signature[4];
+ u32 length;
+ u8 rev; /* PCDP v2.0 is rev 3 */
+ u8 chksum;
+ u8 oemid[6];
+ u8 oem_tabid[8];
+ u32 oem_rev;
+ u8 creator_id[4];
+ u32 creator_rev;
+ u32 num_uarts;
+ struct pcdp_uart uart[0]; /* actual size is num_uarts */
+ /* remainder of table is pcdp_device structures */
+};